HON HAI PRECISION IND J20H085 802.11abgn/BT3.0 Wireless Module User Manual User s manual 1110

HON HAI Precision Ind. Co., Ltd. 802.11abgn/BT3.0 Wireless Module User s manual 1110

User Manual.pdf

1 Project Name MT7650 IEEE802.11a/b/g/n 1×1 + Bluetooth3.0, WiFi+BT module Approval Sheet Rev. 1.0 Foxconn Part No. J20H085.00 J20H085.01 Sony Part No. 1-458-765-31 (J20H085.00) 1-458-765-21 (J20H085.01) Prepared by Reviewed by Approved by Clon Liu Eddie Huang Ambit Microsystems (Shanghai) LTD. No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China Tel :86-21-61206688 Ext:22165 FAX:86-21-57749230 J20H085 User Manual
2 CONTENTS 1 REVISION HISTORY ................................................................................................................................................................................................................................................................................ 4444 2 MANUFACTURING INFORMATION ............................................................................................................................................................................................................................ 5555 3 PRODUCT OVERVIEW ........................................................................................................................................................................................................................................................................ 6666 3.1 APPLICATION SCOPE .................................................................... 6 3.2 REGULATION OF EACH COUNTRIES ......................................................... 7 4 MODULE HARDWARE OVERVIEW ............................................................................................................................................................................................................................ 8888 4.1 BLOCK DIAGRAM ....................................................................... 8 4.2 FEATURES ............................................................................ 8 4.3 INTERFACE AND CONNECTOR ............................................................. 8 5 GENERAL SPECIFICATION .................................................................................................................................................................................................................................................... 10101010 6 ELECTRICAL SPECIFICATION ........................................................................................................................................................................................................................................ 11111111 6.1 ABSOLUTE MAXIMUM RATING ............................................................ 11 6.2 RECOMMENDED OPERATING RATING ...................................................... 11 6.3 DC CHARACTERISTICS ................................................................. 11 6.4 ESD INFORMATION .................................................................... 11 6.5 ENVIRONMENT STORAGE CONDITION ...................................................... 11 7 RF SPECIFICATION ................................................................................................................................................................................................................................................................................ 12121212 7.1 IEEE802.11B ........................................................................ 12 7.2 IEEE802.11G ........................................................................ 13 7.3 IEEE 802.11N HT20 .................................................................. 14 7.4 IEEE 802.11A ........................................................................ 15 7.5 IEEE 802.11AN HT20 ................................................................. 16 7.6 IEEE 802.11AN HT40 ................................................................. 17 7.7 BLUETOOTH 3.0 ....................................................................... 18 7.8 ANTENNA ELECTRICAL SPECIFICATION(J20H085.01)......................................... 19 7.9 POWER UP SEQUENCE ................................................................... 8 MECHANICAL SPECIFICATIONS ........................................................................................................................................................................................................................................ 8.1 SHIELDING COVER DIMENSION ............................................................. 8.2 PCB ASSEMBLY DIMENSION ............................................................... 8.3 MOUNT POSITION OF MATERIALS ........................................................... 9 SCHEMATICS ............................................................................................................................................................................................................................................................................................................ 10 LAYOUT PATTERN ........................................................................................................................................................................................................................................................................................ 10.1 MAIN PCB LAYOUT (TOP VIEW) ............................................................ 10.2 ANTENNA PCB LAYOUT ................................................................... 10.3 PCB SPECIFICATION ..................................................................... 11 BOM (BILL OF MATERIALS) ........................................................................................................................................................................................................................................................ 12 OTP CONTENT ........................................................................................................................................................................................................................................................................................................ 13 LABEL INFORMATION ............................................................................................................................................................................................................................................................................ 13.1 MAC ID LABEL (FOR PVT, MP) ............................................................ 14 PACKAGE AND STACK INFORMATION ................................................................................................................................................................................................................ 14.1 CARTON ASSY ......................................................................... 14.2 PALLET ASSY ..........................................................................
3 14.3 TRAY ID LABEL ......................................................................... 14.4 CARTON LABEL ......................................................................... 14.5 PALLET LABEL .......................................................................... 15 RELIABILITY TEST PLAN .................................................................................................................................................................................................................................................................... 16 HANDLING NOTICE ................................................................................................................................................................................................................................................................................ 20202020 18 NOTIFICATION ................................................................................................................................................................................................................................................................................................ 21212121
4 1 Revision History Date Revision Change Description 2014/10/18 1.0 Initial release
5 2 Manufacturing Information Manufacture Country: Made in China Manufacturer: Ambit Microsystems (Shanghai) LTD. Manufacture Address: No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China
6 3 Product Overview The J20H085 802.11a/b/g/n and BT3.0 module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. This module is based on MTK MT7650U solution .It fully complies with IEEE 802.11n,IEEE 802.11 a/b/g and ,Bluetooth v2.1+EDR, v3.0 standard, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. 3.1 Application scope The wireless LAN is compliant to IEEE 802.11n,IEEE 802.11 a/b/g standards. The data rate of 802.11b is up to 11Mbps and fallback rates of 5.5, 2, 1Mbps. The data rate of 802.11a/g is up to 54Mbps and fallback rates of 48,36,24,18,12,9, 6Mbps. The data rate of 802.11n HT20 is up to 65Mbps and fallback rates of 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps; The data rate of 802.11n HT40 is up to 130Mbps and fallback rates of 117, 104, 78, 52, 39, 26, 13Mbps; The BT Module is compliant to Bluetooth 3.0 and EDR standard: Carrier Frequency: 2402MHz ~ 2480 MHz Carrier Spacing: 1.0MHz Duplexing: TDD Modulation: FHSS GFSK, pi/4-DQPSK, 8DPSK Symbol Rate: 1Mbps (GFSK), 2Mbps (pi/4-DQPSK), 3Mbps (8DPSK)
7 3.2 Regulation of each countries Country Approval Certification Certification No. Description United States Module FCC Part 15C/E Canada Module RSS-210 issue8 Europe Plug-in EN 300 328 v1.8.1 EN 301 893 v1.7.1 EN 301 489 EN 60950 EN 62311 Russia Module FAC Japan Module TECEC Taiwan Module NCC Malaysia Module SIRIM South Africa Module ICASA UAE Module TRA
8 4 Module Hardware Overview 4.1 Block Diagram The general HW architecture is shown below Figure: . 4.2 Features ♦ IEEE802.11a/b/g/n (1X1) based on MTK MT7650U solution. ♦ Support BT3.0 ♦ USB 2.0 Interface, High and Full Speeds supported. ♦ Module is powered by the host with a 5.0V +/- 10% supply. ♦ External PCB printed antennas. ♦ 4 layers through hole PCB design with FR4 with TG-150 material 4.3 Interface and Connector ♦ Pin definition: ♦ Vendor: JST ♦ Vendor P/N: SM05B-GHS-TB
9 Pin Number Symbol Name Status Pin definition 1 GND Ground 2 DP I/O USB positive data 3 DM I/O USB negative data 4 UV+ P USB +5V power input 5 GND Ground S1 GND Ground S2 GND Ground
10 5 General Specification Item Specification Frequency Range 2400MHz~2483.5MHz 5150MHz~5250MHz 5250MHz~5350MHz 5470MHz~5725MHz 5725MHz~5850MHz PCB Case Temperature ~94.4℃@Ta=60℃ IC Case Measurement Temperature ~96.8℃@Ta=60℃ Maximum Ripple on Supplied Voltage: Oscillograph 550mVpp max Antenna Port Impedance 50 ohm typ. Return Loss Antenna 1 <-10dB Antenna 2 <-10dB BT connecter CON1 <-10dB Temperature Operating Temperature -10℃~60℃ Storage Temperature -40℃~85℃ Humidity Operating Humidity 20%~90% (Non-condensing) Storage Humidity 20%~90% (Non-condensing)
11 6 Electrical Specification 6.1 Absolute maximum rating Element Symbol Min Typ Max Unit DC supply voltage UV+ 5.0 6.5 (V) 6.2 Recommended operating rating Element Symbol Min Typ Max Unit DC supply voltage UV+ 4.5 5.0 5.5 (V) 6.3 DC Characteristics Symbol Parameter Min Typ. Max Unit UV+ Supply voltage 4.5 5.0 5.5 (V) 2.4GHz Tx Current(1M/15dBm) 200 (mA) 2.4GHz Tx Current(54M/15dBm) 220 (mA) 2.4GHz Tx Current(MCS0/15Bm/HT20) 220 (mA) 2.4GHz Tx Current(MCS7/15dBm/HT20) 220 (mA) Rx Current 80 (mA) 5GHz Tx Current(MCS7/12dBm/HT40) 300 (mA) 6.4 ESD Information Mode Level Unit HBM +/-1000 V 6.5 Environment Storage Condition Environment condition Temperature Operating Temperature: -10 deg.C ~60 deg.C Storage Temperature: -40 deg.C ~85 deg.C Humidity Operating Humidity: 20% ~90% Storage Humidity: 20% ~90%
12 7 RF Specification 7.1 IEEE802.11b Items Contents Specification IEEE802.11b Mode DSSS / CCK Channel CH1 to CH13 Temperature -10℃~60℃ Data rate 1, 2, 5.5, 11Mbps TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@1Mbps 13.5 15 16.5 dBm 2) Target Power@2Mbps 13.5 15 16.5 dBm 3) Target Power@5.5Mbps 13.5 15 16.5 dBm 4) Target Power@11Mbps 13.5 15 16.5 dBm 2. Spectrum Mask @15dBm 1) fc-33MHz ＜ f ＜ fc-22MHz - - -50 dBr 2) fc-22MHz ＜ f ＜ fc-11MHz - - -30 dBr 3) fc+11MHz ＜ f ＜ fc+22MHz - - -30 dBr 4) fc+22MHz ＜ f ＜ fc+33MHz - - -50 dBr 3. Frequency Error@25℃ -10 - +10 ppm 4 Modulation Accuracy(EVM)@15dBm 1) 1Mbps - -10 dB 2) 2Mbps - -10 dB 3) 5.5Mbps - -10 dB 4) 11Mbps - -10 dB RX Characteristics Min. Typ. Max. Unit 5 Minimum Input Level Sensitivity 1) 1Mbps (FER≦8%) - -92 -91 dBm 2) 2Mbps (FER≦8%) - -91 -89 dBm 3) 5.5Mbps (FER≦8%) - -90 -87 dBm 4) 11Mbps (FER≦8%) - -89 -85 dBm 6 Maximum Input Level (FER≦8%) -10 -5 - dBm *Frequency Error tolerance @ 25℃= ±10ppm
13 7.2 IEEE802.11g Items Contents Specification IEEE802.11g Mode OFDM Channel CH1 to CH13 Temperature -10℃~60℃ Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@6Mbps 13.5 15 16.5 dBm 2) Target Power@9Mbps 13.5 15 16.5 dBm 3) Target Power@12Mbps 13.5 15 16.5 dBm 4) Target Power@18Mbps 13.5 15 16.5 dBm 5) Target Power@24Mbps 13.5 15 16.5 dBm 6) Target Power@36Mbps 13.5 15 16.5 dBm 7) Target Power@48Mbps 13.5 15 16.5 dBm 8) Target Power@54Mbps 13.5 15 16.5 dBm 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -40 dBr 3 Modulation Accuracy(EVM)@15dBm 1) 6Mbps - - -5 dB 2) 9Mbps - - -8 dB 3) 12Mbps - - -10 dB 4) 18Mbps - - -13 dB 5) 24Mbps - - -16 dB 6) 36Mbps - - -19 dB 7) 48Mbps - - -22 dB 8) 54Mbps - -28 -25 dB 4 Frequency Error@25℃ -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) - -92 -83 dBm 2) 9Mbps (PER < 10%) - -91 -81 dBm 3) 12Mbps (PER < 10%) - -90 -79 dBm 4) 18Mbps (PER < 10%) - -87 -77 dBm 5) 24Mbps (PER < 10%) - -85 -75 dBm 6) 36Mbps (PER < 10%) - -80 -73 dBm 7) 48Mbps (PER < 10%) - -77 -71 dBm 8) 54Mbps (PER < 10%) - -75 -69 dBm 6 Maximum Input Level (PER < 10%) -20 -11 - dBm *Frequency Error tolerance @ 25℃= ±10ppm
14 7.3 IEEE 802.11n HT20 *Frequency Error tolerance @ 25℃= ±10ppm Items Contents Specification IEEE802.11n HT20 Mode OFDM Channel CH1~CH13 Temperature -10℃~60℃ Data rate (MCS index) MCS0/1/2/3/4/5/6/7 TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@MCS0 13.5 15 16.5 dBm 2) Target Power@ MCS1 13.5 15 16.5 dBm 3) Target Power@ MCS2 13.5 15 16.5 dBm 4) Target Power@ MCS3 13.5 15 16.5 dBm 5) Target Power@ MCS4 13.5 15 16.5 dBm 6) Target Power@ MCS5 13.5 15 16.5 dBm 7) Target Power@ MCS6 13.5 15 16.5 dBm 8) Target Power@ MCS7 13.5 15 16.5 dBm 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -45 dBr 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - - -28 dB 4. Frequency Error@25℃ -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) - -91 -81 dBm 2) MCS1 (PER < 10%) - -89 -79 dBm 3) MCS2 (PER < 10%) - -87 -77 dBm 4) MCS3 (PER < 10%) - -84 -75 dBm 5) MCS4 (PER < 10%) - -80 -73 dBm 6) MCS5 (PER < 10%) - -75 -71 dBm 7) MCS6 (PER < 10%) - -74 -69 dBm 8) MCS7 (PER < 10%) - -72 -67 dBm 6. Maximum Input Level (PER < 10%) -20 -10 - dBm
15 7.4 IEEE 802.11a Items Contents Specification IEEE802.11a Mode OFDM Channel CH36 to CH165 Temperature -10℃~60℃ Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@6Mbps 10.5 12 13.5 dBm 2) Target Power@9Mbps 10.5 12 13.5 dBm 3) Target Power@12Mbps 10.5 12 13.5 dBm 4) Target Power@18Mbps 10.5 12 13.5 dBm 5) Target Power@24Mbps 10.5 12 13.5 dBm 6) Target Power@36Mbps 10.5 12 13.5 dBm 7) Target Power@48Mbps 10.5 12 13.5 dBm 8) Target Power@54Mbps 10.5 12 13.5 dBm 2. Spectrum Mask @12dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -40 dBr 3 Modulation Accuracy(EVM)@12dBm 1) 6Mbps - - -5 dB 2) 9Mbps - - -8 dB 3) 12Mbps - - -10 dB 4) 18Mbps - - -13 dB 5) 24Mbps - - -16 dB 6) 36Mbps - - -19 dB 7) 48Mbps - - -22 dB 8) 54Mbps - -28 -25 dB 4 Frequency Error@25℃ -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) - -92 -83 dBm 2) 9Mbps (PER < 10%) - -91 -81 dBm 3) 12Mbps (PER < 10%) - -90 -79 dBm 4) 18Mbps (PER < 10%) - -87 -77 dBm 5) 24Mbps (PER < 10%) - -85 -75 dBm 6) 36Mbps (PER < 10%) - -80 -73 dBm 7) 48Mbps (PER < 10%) - -77 -71 dBm 8) 54Mbps (PER < 10%) - -75 -69 dBm 6 Maximum Input Level (PER < 10%) -20 -11 - dBm *Frequency Error tolerance @ 25℃= ±10ppm
16 7.5 IEEE 802.11an HT20 *Frequency Error tolerance @ 25℃= ±10ppm Items Contents Specification IEEE802.11an HT20 Mode OFDM Channel CH36 to CH165 Temperature -10℃~60℃ Data rate (MCS index) MCS0/1/2/3/4/5/6/7 TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@MCS0 10.5 12 13.5 dBm 2) Target Power@ MCS1 10.5 12 13.5 dBm 3) Target Power@ MCS2 10.5 12 13.5 dBm 4) Target Power@ MCS3 10.5 12 13.5 dBm 5) Target Power@ MCS4 10.5 12 13.5 dBm 6) Target Power@ MCS5 10.5 12 13.5 dBm 7) Target Power@ MCS6 10.5 12 13.5 dBm 8) Target Power@ MCS7 10.5 12 13.5 dBm 2. Spectrum Mask @12dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -45 dBr 3. Modulation Accuracy(EVM)@12dBm 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - - -28 dB 4. Frequency Error@25℃ -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) - -91 -81 dBm 2) MCS1 (PER < 10%) - -89 -79 dBm 3) MCS2 (PER < 10%) - -87 -77 dBm 4) MCS3 (PER < 10%) - -84 -75 dBm 5) MCS4 (PER < 10%) - -80 -73 dBm 6) MCS5 (PER < 10%) - -75 -71 dBm 7) MCS6 (PER < 10%) - -74 -69 dBm 8) MCS7 (PER < 10%) - -72 -67 dBm 6. Maximum Input Level (PER < 10%) -20 -10 - dBm
17 7.6 IEEE 802.11an HT40 *Frequency Error tolerance @ 25℃= ±10ppm Items Contents Specification IEEE802.11an HT40 Mode OFDM Channel CH38 to CH159 Temperature -10℃~60℃ Data rate (MCS index) MCS0/1/2/3/4/5/6/7 TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@MCS0 10.5 12 13.5 dBm 2) Target Power@ MCS1 10.5 12 13.5 dBm 3) Target Power@ MCS2 10.5 12 13.5 dBm 4) Target Power@ MCS3 10.5 12 13.5 dBm 5) Target Power@ MCS4 10.5 12 13.5 dBm 6) Target Power@ MCS5 10.5 12 13.5 dBm 7) Target Power@ MCS6 10.5 12 13.5 dBm 8) Target Power@ MCS7 10.5 12 13.5 dBm 2. Spectrum Mask @12dBm 1) at fc +/- 21MHz - - -20 dBr 2) at fc +/- 40MHz - - -28 dBr 3) at fc > +/-60MHz - - -45 dBr 3. Modulation Accuracy(EVM)@12dBm 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - - -28 dB 4. Frequency Error@25℃ -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) - -88 -78 dBm 2) MCS1 (PER < 10%) - -86 -76 dBm 3) MCS2 (PER < 10%) - -84 -74 dBm 4) MCS3 (PER < 10%) - -81 -72 dBm 5) MCS4 (PER < 10%) - -77 -70 dBm 6) MCS5 (PER < 10%) - -72 -68 dBm 7) MCS6 (PER < 10%) - -71 -66 dBm 8) MCS7 (PER < 10%) - -69 -64 dBm 6. Maximum Input Level (PER < 10%) -20 -10 - dBm
18 7.7 Bluetooth 3.0 Parameter Condition Specification Units Min Typ Max Basic Data Rate – Transmit Performance RF Transmit Power 2.5 5 7.5 dBm Tx Output Spectrum -20 dB Bandwidth 1 MHz Frequency range 79 Initial Carrier Frequency Tolerance ±75 KHz Carrier Frequency Drift DH1/3/5 Drift rate ±20 kHz/50 µs DH1 ±25 KHz DH3 ±40 DH5 ±40 Modulation Characteristics F1avg 140<∆f1avg<175 kHz F2max ≥ 115 F2avg/F1avg 80 % Adjacent Channel Transmit Power +/-500KHz -27 dBc |M-N|=2 -20 dBm |M-N|≥3 -40 Transmission Spurious Emission-1 f<2.387GHz -26 dBm 2.387 GHz< f<2.400 GHz -16 2.4835 GHz<f<2.4965 GHz -16 f>2.4965 GHz -26 Transmission Spurious Emission-2 700~805MHz -130 dBm/ Hz 869~894MHz -135 925~960MHz -135 1,805~1,880MHz -135 1,930~1,990MHz -135 2,110~2,170MHz -135 1,574.4~1,576.4MHz -150 Enhanced Data Rate – Transmit Performance RF Transmit Power π/4 DQPSK 2.5 5 7.5 dBm 8DPSK 2.5 5 7.5 Relative Transmit Power Pdpsk (PGFSK-4 dB)<PDPSK<(PGFSK+1 dB) Carrier Frequency Stability ωi -75 75 kHz ω0 -10 10 ωi +ω0 -75 75 Modulation Accuracy – RMS DEVM π/4 DQPSK ≤ 20 % 8DPSK ≤ 13 Modulation Accuracy – Peak DEVM π/4 DQPSK ≤ 35 8DPSK ≤ 25 Modulation Accuracy – 99% DEVM π/4 DQPSK ≤ 30 8DPSK ≤ 20 In-band Spurious Emissions f>f0+3 MHz ≤ -40 dBm f<f0-3 MHz ≤ -40 f=f0-3 MHz ≤ -40 f=f0-2 MHz ≤ -20 f=f0-1 MHz ≤ -26 dBr f=f0+1 MHz ≤ -26 f=f0+2 MHz ≤ -20 dBm f=f0+3 MHz ≤ -40 EDR Differential Phase Coding 99 %
19 Transmission Spurious Emission-1 f<2.387GHz -26 dBm 2.387 GHz< f<2.400 GHz -16 2.4835 GHz<f<2.4965 GHz -16 f>2.4965 GHz -26 7.8 Antenna Electrical Specification(J20H085.01) - RX Characteristics - Min. Typ. Max. Unit 1. Minimum Input Level Sensitivity GFSK (1Mbps) - -88 -79 dBm π/4 DQPSK (2Mbps) - -88 -79 dBm 8DPSK (3Mbps) - -84 -76 dBm Parameter Value Units Operating frequency range 2.4 ~ 2.4835 5.15~5.85 GHz Antenna gain (max) -0.4 @2.4GHz 1.12 @5GHz dBi (ANT1) Antenna gain (max) 0.28 @2.4GHz 0.9 @5GHz dBi (ANT2)
20 8 Handling Notice 1) ESD There are semiconductors on the module, please handle the module under ESD protected and well-controlled environment (<1000V). 2) Storage and Usage Condition 1. Moisture barrier bag must be stored under 40℃, humidity under 90% RH, when the moisture barrier bag is sealed by Foxconn. 2. The calculated shelf life for the dry packed product shall be a 12 months from the bag seal date. 3. If Moisture barrier bag is open, the component must be stored in an environment of <25±5℃ /10%RH 9 4. Please keep the module at 30℃/70% RH.
21 17 Notification When any change item happens in the product approval sheet, Foxconn will always inform in advance and get approval by Sony. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
22 This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: MCLJ20H085”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
23 Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 2878D-J20H085”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où
24 l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D-J20H085". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and (iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. (iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
25 Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: - EN 60950-1/A12: 2011 Safety of Information Technology Equipment - EN 62311: 2008 / Article 3(1)(a) and Article 2 2006/95/EC) Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified)) - EN 300 328 V1.8.1: 2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive - EN 301 893 V1.7.1: 2012 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive - EN 301 489-1 V1.9.2: 2011 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements - EN 301 489-17 V2.2.1: 2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ∆ΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ. Français Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux
26 [French] exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português [Portuguese] [Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. 低功率電波輻射性電機管理辦法低功率電波輻射性電機管理辦法低功率電波輻射性電機管理辦法低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
27 在5.25-5.35秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。 1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤。 2. 系統廠商應於平台上標示「本產品內含射頻模組： XXXyyyLPDzzzz-x」字樣。

Navigation menu