HOOVER Vacuum, Upright Manual L0522973

User Manual: HOOVER HOOVER Vacuum, Upright Manual HOOVER Vacuum, Upright Owner's Manual, HOOVER Vacuum, Upright installation guides

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

WindTunnel
by HOOVER

Congratulations
on your purchase!

This WindTunnel
uses HOOVER®
Type

"Y"

filter

vacuum
cleaner
HEPA Filtration
TM

bags

This product
was designed
for
easy assembly
(See page 3)

www,

hoover.com

Owner's

Manual
operating
cleanerbefore
Review
this manual

ENGLISH -) pp.1-12
ESPANOL -) pag. 13-20
FRANOAtS -) p. 21-28

Fill in and retain
The model

and serial

number

are located

For your personal
records, please
in the spaces provided
and retain
Your cleaner

on the bottom

of the cleaner

enter the COMPLETE
this information.

model

as shown.

and serial

number

is model

and has serial number
It is suggested
that you attach your sales receipt to this owner's
manual.
Verification
of date of purchase
may be required for warranty
service of your
HOOVER
product.

SERIAL
NUMBER

Be sure to fill out and return the product registration card included with
your cleaner.

Index
Assembling Cleaner .......................... 3-5
Carton Contents .................................... 3
Cleaner Descriptions ............................ 5
How To Use ........................................ 5-8
Embedded Dirt FINDER tm Feature ..6
Cleaning Tools ................................ 7-8
If You Have a Problem ........................ 12
Important Safeguards .......................... 2
Lubrication .......................................... 11
Maintenance
Authorized Service .......................... 11
Cleaning Filters ................................ 9
Clearing Blockages ........................ 12
Replacing Agitator Brush Roll ...... 11
Replacing Belt ................................ 10
Replacing Edge Groomers ............ 11
Replacing Headlight ........................ 10
Replacing Filter Bag ........................ 9
Thermal Protector .............................. 11
Warranty ..............................................
12

Important

xxxxxxxx_xxx

Safeguards!

When using an electrical appliance,

always follow

READ ALL INSTRUCTIONS

W arn ing:

To reduce

basic precautions,

including the following:

BEFORE USING THIS APPLIANCE
the

risk

of fire,

electric

shock,

or injury:

•
•

Do not use outdoors
or on wet surfaces.
Close supervision
is necessary
when any appliance
is used by or near children.
Do not allow vacuum
cleaner to be used as a toy or to run unattended
at any
time.

•

Keep hair, loose clothing,
fingers,
feet and all parts of body away
rotating
agitator
and other moving
parts.
Do not operate cleaner
when wearing
open toe shoes or sandals.

•

Do not pick up anything
or hot ashes.

•

Do not use to pick up flammable
or combustible
materials
such
wood sandings
or use in areas where they may be present.

that

• Avoid picking up hard,
cleaner and the bag.
• Always

turn

off this

is burning

sharp

objects

appliance

before

or smoking,

with

such

the cleaner.

connecting

from openings,
in bare feet or

as cigarettes,

They

as gasoline

may damage

or disconnecting

or fine

the

hose.

Do not use without
dust bag or filters in place.
picking
up very fine materials
such as powder.

•

Use extra

•

Do not put any object into openings.
Do not use with any opening
free of dust, lint, hair, or anything
that may reduce air flow.

•

Do not pull or carry by cord, use cord as a handle, close door on cord or pull
cord around sharp edges or corners.
Do not run appliance
over cord. Keep cord
away from heated surfaces.

care when

• Always

disconnect

•

cleaner

Unplug

cleaning

cord

when

from

Change

matches,

•

bag frequently

when

on stairs.

electrical

not in use. Turn

•

NIIHHIHHIII
.............
_

outlet

before

off all controls

Do not unplug
by pulling
on cord.
To unplug,
grasp
handle plug or appliance
with wet hands.
• The use of an extension
cord is not recommended.

servicing
before

blocked;

keep

the cleaner.
unplugging.

the plug,

not the cord.

Never

•

Do not use with damaged
cord or plug. If appliance
is not working
as it should,
has been dropped,
damaged,
left outdoors,
or dropped
into water, take it to a
Hoover Factory Service
Center or Authorized
Hoover Warranty
Service
Dealer
(Depot).

•

Use vacuum
cleaner
Use only attachments
hazards.

Save

only for its intended
use as described
in the instructions.
recommended
by The Hoover Company;
others
may cause

these

instructions!

This cleaner was inspected and packaged carefully before being shipped from the factory.
If you should happen to need assistance during assembly or operation,
Visit us online at www.hoover.com
to find the service outlet nearest you (click on
the "Service" button) OR
Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only)
OR
Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.

Carton

contents

B
E
Remove all parts from carton and identify each item
shown. Make sure all parts are located before disposing
of packing.
A. Handle section
B. Cleaner body
C. Hose rack

Note: The white switch lock above the ON/OFF
switch aids in the assembly of your cleaner, Assembly
can be continued if the switch lock is missing,
However, do not remove the switch lock until
assembly is completed.

D. Hose, cleaning tools and wands
E. Handle bolts and nuts packet
(in bag with owner's manual)

.t / :l ;lI I:I

i _[._ ,! _[._ :eq =[, I ,_.l =[, I[:

Open tool cover on handle section

Attach hose rack to handle section

(A).

by fitting hooks (B) on rack over
slots (C) on handle section.

Align hole on rack with circular tab
on handle.

Continued

Remove bag door on cleaner body
by pushing down at top of door and
pulling door outward.
Switch (A) above bag door should
be in OFF position.

While holding rack in place, slide
handle onto cleaner body.
Make sure tab is inserted fully into
slot.

Push bolts into holes on back of
handle.

Place nuts in recessed areas on
front of handle. Hold each nut in
place while tightening each bolt
securely with a Phillips screw driver.

Reposition bag door by fitting tabs
on bottom of door into opening.
Press top of door to snap securely
shut.

Press cord into the 3 notches and
the clip as shown.

NOTE:

Hose must
operations.

be connected

as shown

for all

iEllll

Bj
I

Align end of hose with projections
(A) over slots (B) in dirt duct.

Slide hose into (B) and twist hose to
lock it into place.
Lift hose tube cover (C).

Position hose over rack and into
hose tube (D) or (E) (depening on
your model).

iii1.1

Placesmallerunridgedendofwand
intobottomof rack.Snapwandinto
clip.Repeatwithotherwand.
Opentoolcover.

Cleaner

Insert ends of dusting brush (A),
crevice tool (B) into storage areas.
Secure furniture nozzle (C) in clip.
Close tool cover.

description
The assembled cleaner will
look like the drawing.
1. Handle
2. ON/OFF switch
3. Cord hooks: wrap cord
around hooks for storage.
The top hook can be
rotated right or left for
easy cord release.
4. Hose
5. Tool cover
6, Dusting brush
7, Furniture nozzle

8
21-....

2 19.,
18_____

15"

Crevice

Carrying

10,

Wands

tool

handle

11, Final filter door
12, Handle release

11
12

----'-13

1:
Polarized

Remove switch lock (A) above ON/
OFF switch (B) by pulling it straight
out. Dispose of switch lock.
if switch lock has come off during
assembly, make sure switch is in
OFF position (down) before plugging cord into electrical outlet.

plug

To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician to install the
proper outlet. Do not change the
plug in any way.

ON-OFF

lever:

step on lever to louver
handle to operating or
low positions.
13, Edge groomers
14.Furniture guard: helps
prevent cleaner from
marking furniture.

15. Nozzle control knob: slide
knob to correct setting for
height of carpet being
cleaned.
16. Headlight
17. Embedded Dirt FINDER TM
sensitivity
switch*
18. 'Dirt FINDER' display*
19. Check bag indicator
20.Stair cleaning handle:
located below louver edge
of door.
21. Bag door
22. Cord clip
23. Hose rack

*some models only
Operate cleaner only at voltage specified on data plate
on bottom of cleaner.
This cleaner is intended for
household use.

switch

Plug cord into electrical outlet.
To turn cleaner ON, push switch up.
To turn cleaner OFF, push switch
down.

Cord

clip

To help keep the cord out of the way
while vacuuming, position cord in
cord clip (A) located at rear of
cleaner on hose rack.

Continued

Transporting

cleaner

Carrying

To move your cleaner from room to
room, put handle in upright position,
tilt cleaner back on rear wheels and
push forward.

Embedded
DirtFINDER
feature
(some models only)

With red and green lights (A), the 'Dirt
FINDER' system alerts the user to
areas of carpet that may need more
cleaning attention. It is able to sense
when larger amounts of dirt particles,
especially embedded dirt, are
removed.
To let you know that the 'DirtFINDER'
feature is ready, the red light will

Handle

cleaner

positions

The cleaner can also be moved by
using the carrying handle.

The handle of your cleaner has three
positions; upright for storage and
when using cleaning tools; operating
position for general operation on
carpet and floors; low for reaching
under low furniture. Step on handle
release lever to lower handle.

come on when the cleaner is first
turned on. After a few seconds, the
red light will go off and the green
light will come on. Cleaning may
then begin.
The green light will remain on
throughout cleaning except when
the detector senses that a larger
amount of dirt is being picked up;
then the red light will come on.

time. This means that the carpet
contains a high level of dirt which is
being removed by the cleaner. To
decrease the feature's sensitivity to
dirt, set the switch to the "Reg."
(Regular) position.

When the red light is on, you should
take additional cleaning strokes in
the area until it changes to green.
eThe red light may seldom come on
during cleaning. This means that
your cleaner is picking up primarily
fine surface dust and lint which the
system may not detect, or that the
carpet is generally clean. To
increase the feature's sensitivity to
dirt, set the switch (B) to the "Hi"
position.
•,At other times, the red light may
stay on for a considerable amount of

IIIIliila,,,,....
HIGH

BARE
FLOOR

Settings

Carpet

height

adjustment
The cleaning of carpet and rugs
takes place at the nozzle (A).
When it is necessary to raise and
lower the nozzle for various carpet
pile heights, slide the nozzle control
knob (B) to the desired setting.
6

Handle

position

For ease in sliding knob, the handle
should be in the upright position (C).
The nozzle will not move into the
adjusted position until the cleaner
handle is lowered to the operating
position (D).

For maximum cleaning performance, the following carpet height
settings are recommended:
• Lowest setting: for all types of
carpet
Note: if the cleaner is difficult to
pus h , slide knob to the next higher
sethng.
• Higher settings: for very deep
pile carpet where easier pushing
effort is desired, while maintaining
good cleaning performance.

Cleaning
flexible

lightweight
rugs

Stand on one end of rug and move
cleaner toward other end or edge.
Before reaching edge, push down
on handle. This will lift up the nozzle
(front of cleaner) as shown and will
prevent rug from clinging to cleaner.
Continue to lift up nozzle so that
when you have reached the edge, it
is completely off the rug. Move
cleaner back to start again, lower
nozzle, and use only forward
strokes.

Edge

cleaning

Special edge groomers are provided on both sides of the nozzle to
remove dirt in carpet near baseboards and furniture.
Guide either side of nozzle parallel
to edge of carpet or furniture.

Stair

cleaning

A stair cleaning handle has been
designed for ease in using vour
cleaner on stairs. With handle in
operating position, place fingers
under edge of stair cleaning handle
and guide cleaner with other hand
on upper handle.
As an alternative, VOUmay use the
hose and poweredhand tool or furniture nozzle for stair cleaning.
Clean from bottom to top.
When using cleaning tools, the
agitator will continue to rotate.
CAUTION: To avoid personal
injury or unnecessary wear to carpet, and to prevent the cleaner
from falling always place it at
bottom of sta rs.

E
F

)
)

[3
How

cover

to attach

tool

The tool cover is designed with a
break-away feature which allows it
to snap free if it is pushed open too
far.
To reattach, align hinges of cover
with slots on sides of tool storage
area.
Push cover down to secure in place.

Removing

hose

When using cleaning tools, cleaner
handle should be in the upright
position. Also, turn cleaner OFF
before disconnecting and connecting hose to hose tube (A).
To use hose, lift hose end as shown.
Lower cover (B) onto hose tube.
When you are finished cleaning with
the tools, be sure to lift cover from
hose tube and reposition hose
end into tube.

Select

proper

tool

C. Dusting brush may be used for
carved furniture, table tops, books,
lamps, lighting fixtures, venetian
blinds, baseboards, shutters, and
registers.
D. Furniture nozzle may be used
for upholstered furniture, draperies,
mattresses, clothing, automobile
interiors, and carpeted stairs.

Tools allow for cleaning surfaces
above the floor and for reaching
hard to clean areas.

E. Crevice tool may be used in
tight spaces, corners and along
edges in such places as dresser
drawers, upholstered furniture,
stairs and baseboards.

The cleaner is ready for tool use
when handle is in upright position.

F. Wands are used to give extra
length to your hose. Use them with
any of the above tools.

Cleaning

tools

CAUTION: Agitator continues to
rotate while cleaner handle is in
upright position. Avoid tipping
cleaner or setting it on furniture,
fringed area rugs or carpeted
stairs during tool use.

Continued

Extra

reach

hose*

The extra reach hose provides an
extra 20 foot reach for easier cleaning of stairs and hard to reach high
places. Follow the steps below for
attaching and detaching the hose.
H

Attach

wand

and

Slide hose into (J) and twist hose to
lock it into place.
(To detach hose, reverse procedure.) Attach wands or tools to the
other end of hose.

tools

Attach tool or wand to the hose (G).
Attach second wand or tool to wand
(H) by pushing it firmly onto the
wand.
Twist wand or tool slightly to tighten
or loosen the connection.

Attach

How

Push ON/OFF switch to OFF position. Remove regular hose from
cleaner. Align end of extra reach
hose with projections (I) over slots
(J) in dirt duct.

to clean

tools

To clean the hose, wipe off dirt with
a cloth dampened in a mild detergent. Rinse with a damp cloth.
Cleaning tools may be washed in
warm water with a detergent. Rinse
and air dry before using.

hose

*Available at additional cost if not
included with your cleaner.

Where

Familiarize yourself with these home
maintenance tasks as proper use
and care of your cleaner will ensure
continued cleaning effectiveness.

Filter
When

Check

bag

indicator

The indicator (K) will begin to show
red as the filter bag fills with dirt.
There are three conditions that will
cause the indicator to become completely red:
1. If the bag is full; change the bag.
2. If very fine materials have been
picked up, clogging the bag pores;
change the bag.
3. If there is a blockage in the nozzle,
hose, tools or at the bag opening;
remove the blockage (see "Clearing
blockages" section).

bag
to replace

Check filter bag from time to time. It
is recommended that you change
the filter bag before debris reaches
the bottom of the bag collar. If more
dirt than this accumulates, your
cleaner will not operate effectively.
Note: All new carpet has loose
fibers which can fill the bag quickly while vacuuming. This type of
debris does not activate the "Check
Bag" indicator, available on some
models.
So, if you are using the cleaner on
new carpet, be sure to change the
filter bag often, even if you have a
"Check Bag" indicator and it does
not show red.
CAUTION: Very fine materials,
such as face powder or cornstarch, may seal the filter bag and
may cause it to burst even though
it is only partially full of dirt.
When cleaner is used to remove
material of this nature, change filter bag often.

te buy

Filter bags may be purchased from
your Authorized Hoover Dealer,
Leading Retailers, Hoover Factory
Service Centers, or through The
Hoover Company on-line at
_,_rW'w,h cove

What

r, corn,

to buy

To assure cleaning effectiveness,
use only Genuine HOOVER@ HEPA
Fimtration T_
disposable filter
bags.

It is imperative that you use only
genuine HOOVER filter bags distributed by The Hoover Company to
assure that your cleaner operates at
peak performance. HOOVER bags
can be identified by these trademarks --

Changing
filter
bag
Disconnect cleaner from electrical
outlet.

Removing

and installing

filter

bag door

Grasp filter bag collar (A) and pull
collar from tube (B).

To change filter bag, press down at
top of bag door and pull door forward.

Note: Do not clean out old filter bag
and reuse. Discard used filter bag.

Remove door.

Hold new filter bag as shown. Align
opening in filter bag with (B).

Removing

Replacing

bag door

Reposition bag door by placing tabs
on bottom of door into opening (C).
Press top of door to snap securely
shut.

Push (A) firmly onto (B).
Tuck in filter bag.

Secondary
filters

and

final

Cleaning

secondary

filter

Disconnect cleaner from electrical
outlet.
The secondary filter (A), located
behind the grill in the bottom of bag
compartment, protects the motor
from dirt particles.
If filter becomes dirty, pull off grill
and lift out filter.
Hand wash filter in cold water with
mild detergent, then air dry.
Reposition dry filter and grill.
Should you want to replace this filter,
ask for HOOVER part No. 38765019.

final

filter

The final filter assists in the filtration process to return clean air to
the room,
To remove this filter when it becomes dirty, open the door on the
side of the cleaner.
Lift out filter (B) and hand wash it in
cold water with mild detergent.
Let filter air dry and reposition it on
the side of the cleaner. Make sure
the green colored side of filter faces
outward. Close door.
Should you want to replace this filter, ask for HOOVER part No.
40110004.
Do not operate cleaner without
either the secondary or final filter
in place.

Reattaching

filter

door

The filter door is designed with a
"break-away" feature which allows it
to snap free if it is pushed open too
far.
To reattach, align hinges (C) of
cover with slots on sides of filter
area.
Press door back into place.

Check

agitator

shield

Because your cleaner picks up so
well, we strongly recommend you
check for debris accumulation
under the agitator shield each time
you clean the filters.
Removing debris under the shield
will help maintain your cleaner's
excellentpick up and suction.
Remove debris as follows:
1. Disconnect cleaner from electrical outlet.
2. Check for dirt accumulation by
removing bottom plate (Fig. 3-10),
removing agitator (Fig. 3-11 ), and
lifting agitator shield (-Fig. 3-13).
3. Remove any debris and replace
shield, agitator and bottom plate
(Figs. 3-13 to 3-15).

Headlight
What

replacement

to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No. 27313101.

Removing

lens

Installing

bulb

Disconnect cleaner from electrical
outlet.

Pull old bulb straight out of socket.
Push new bulb straight into socket
until locked in place.

Using a screwdriver, remove the two
screws as shown and lift off lens.

Excessive

Belt

Replacing

lens

Reposition lens and secure with the
two screws.

force is not required.

replacement

The belt on your Hoover cleaner
causes the agitator to rotate and is
important for the effective operation
of the cleaner. The belt is located
under the bottom plate of the cleaner
and should be checked from time to
time to be sure it is in good condition.

When

to replace

Disconnect cleaner from electrical
outlet.
To check belt, remove bottom plate
as shown in "How to replace".
Replace belt if it is stretched, cut or
broken.

What

to buy

To assure effective operation, use
only genuine HOOVER belts with your
cleaner. When purchasing a new
belt, ask for HOOVER part No.
38528033 (belt package no.
40201160).

How

to replace

Disconnect cleaner from electrical
outlet.
Removing
bottom plate
Place handle in low position and
turn cleaner over so bottom side is

Removing

belt

Remove agitator brush roll and used
belt.
Discard used belt.

up,

Remove the 4 screws as shown with
a Phillips screw driver.
Lift off bottom plate (A).

Installing
new belt
With lettering on outside of belt and
positioned as shown in box on (D),
slide new belt over motor pulley (B).

Replacing
agitator
brush roll
Insert agitator through belt and
place belt in belt guide (C) on agitator.

Should the agitator shield (D) become dislodged while replacing the
belt or the agitator, reposition it as
shown noting the placement of its
belt guide (E).

Securing agitator
Grasp agitator firmly and fit it into
position by first sliding end opposite
the belt into the rectangular slot (F)
on side of cleaner.
Pull other side of agitator (G) into
place.
Turn agitator making sure belt is not
pinched between agitator and agitator shield.

The agitator
When

brush

roll

to replace

When agitator brushes are worn, the
agitator should be replaced.
To check condition of brushes, disconnect cleaner from electrical
outlet.
\

RepUacing
bottom
pUate
Rej_osition bottom plate and 4
Phillips head screws. Tighten
screws securely.

Move edge of a card across bottom
plate while turning agitator. To
maintain cleaning effectiveness,
replace agitator if brushes do not
touch card.

What

to buy

Your cleaner requires either a 13" or
15" agitator. When purchasing a
new agitator, ask for one of the following:
13" - HOOVER part No. 48414110
15" - HOOVER part No. 48414115

The
When

edge

to buy

to replace

Disconnect
outlet.

cleaner from electrical

Remove bottom plate as described
in "The belt" section (Fig. 3-10).

cleaner from electrical

Remove bottom plate, belt and agitator followingdirections
in 'The
belt sectionbeginning
with Fig. 310.
Discard old agitator.
Continue following the directions in
'The belt section to reposition belt,
new agitator and bottom plate.

The motor is equipped with bearings that contain sufficient lubrication for the life of the motor. The
addition of lubricant could cause

to replace

When purchasing edge groomers,
ask for HOOVER part No.
39511004.

How

to replace

Disconnect
outlet.

Lubrication

groomers

The edge groomers, located on both
sides of the nozzle, should be
replaced when they appear worn.

What

Hew

Installing

groomers

Lift off both old edge groomers and
slide new edge groomers into position as shown.

damage. Therefore, do not add
lubricant to motor bearings. The
agitator is equipped with two ball
bearings that should be lubricated
periodically by a Hoover Factory
Service Center or an Authorized
Hoover Warranty Service Dealer
(Depot).

Reposition bottom plate and secure
with 4 Phillips head screws.

Thermal

protector

An internal thermal protector has been
designed into your cleaner to protect
it from overheating.
When the thermal protector activates, the cleaner will stop running.
If this happens, proceed as follows:
1. Turn the cleaner OFF and disconnect it from the electrical outlet.
2. Check secondary and final filters
for dirt accumulation.
3. Refer to "Clearing blockages"
section.
4. When cleaner is unplugged and
the motor cools for 30 minutes, the
thermal protector automatically resets
and cleaning may continue.
If the thermal protector continues to
activate after following the above
steps, your cleaner may need servicing (see "Service" section).

Service
To obtain approved HOOVER service
and genuine HOOVER parts, locate
the nearest Hoover Factory Service
Center or Authorized Hoover
Warranty Service Dealer (Depot)
by:
• checking the Yellow Pages
under "Vacuum Cleaners-Household" OR• checking the list of Factory
Service Centers provided with this
cleaner OR • checking the Service section of
The Hoover Company on-line at
www.hoover.com
OR • calling 1-800-944-9200 for an
automated referral of authorized service outlet locations (U.S. only).

If further assistance is needed, contact The Hoover Company
Consumer Response Center, North
Canton, Ohio 44270, Phone: 1-330499-9499.
In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8,
Phone: 1-800-263-6376.
Always identify your cleaner by the
complete model number when
requesting information or ordering
parts. (The model number appears
on the bottom of the cleaner.)

Do not send your cleaner to The
Hoover Company in North Canton for
service, this will only result in delay.
11

Hoover Cleaning
Performance

Clearing

blockages

This Hoover Cleaning Performance
System is for comparing
the relative
progresswe
performance
of Hoover
uprights
only and not for comparison with any other brands
The
majority of this rating is based upon
ASTM international
Carpet Cleaning
Effectiveness
Testing (ASTM Test
F608) Other performance
factors
include Hose Power (ASTM Test
F558), Surface Litter Cleaning,
Hard
Floor Cleaning,
Edge Cleaning,
Cleaning Width and Air Filtration

Low suction or pick up may be due
to a blockage in the system. Refer
to the following steps to check for
blockages continuing with each
step until the blockage is found:
1. Check fullness of filter bag;
change if needed.

If a minor problem occurs, it usually
can be solved quite easily when the
cause is found by using the checklist below.
I;rt_
q I_11111:_]
l_4_llf_i
ITti'_l'II'illll
Possible
Possible

Checking

airflow

path

2. Plug cleaner in and turn ON.
Check for suction at end of hose (A).

Cause
Solution

• Not firmly plugged
• Plug unit in firmly

a. If there is suction, continue with
step 3.
b. if there is no suction, check for
blockage in hose and dirt tube as
follows:

• No voltage in wall plug
• Check fuse or breaker
• Blown fuse or tripped breaker
• Replace fuse or reset breaker
• Thermal protector activated
• Allow cleaner to cool for 30 minutes
(this will reset the thermal protector)
I ""..._ ,"1['?G?Ii_ P-'-'_II_'tf'_

_1"_i1"_

.1i?iI

Possible Cause
Possible Solution
• Broken or worn belt
• Replace belt

1) Disconnect hose from dirt duct
!,C) by revers,!ng procedure for
Attach hose on p. 4, Figs. 1-11
and 1-12.
2) Clear out hose.
3) Look into (C) and remove
blockage.
3. Check connection at hose tube
(B); remove any blockage.

• Agitator brush roll worn
• Replace brush roll
• Filter bag full
• Change filter bag

• Blockage in air flow passage
• Clear blockage

Cause
Solution

• Incorrect carpet height setting
• Move carpet height control to a higher
setting

Checking

under

bottom

plate

4 Turn cleaner OFF and unplug
5 Remove bottom plate, belt and
agitator (see "The belt" section)
Look into opening (D) for blockages
and remove

Possible
Possible

Cause
Solution

• Belt broken or stretched
• Replace agitator brush roll belt as
described in Figs. 3-10 through 3-15 in
the Maintenance section.
12

Year

(Domestic

Use)

Your HOOVER@ appliance is warranted
in normal household use, in accordance
with the Owner's Manual against original
defects in material and workmanship for
a period of one full year from date of
purchase. This warranty provides, at no
cost to you, all labor and parts to place
this appliance in correct operating condition during the warranted period. This
warranty applies when the appliance is
purchased in the United States including
its territories and possessions, or in
Canada or from a U. S. Military
Exchange. Appliances purchased elsewhere are covered by a limited one year
warranty which covers the cost of parts
only. This warranty does not apply if the
appliance is used in a commercial or
rental application.
This warranty only applies when the
product is in use in the country or territory in which it is purchased.
Warranty service can only be obtained
by presenting the appliance to one of
the following authorized warranty service
outlets. Proof of purchase wiil be
required before service is rendered.
1. Hoover Factory Service Centers.

2 Hoover Authorized Warranty
Service Dealers (Depots)
For an automated referral of authorized service outlets in the U.S.A.,
phone 1-800o944-9200 OR
visit The Hoover
www,hoover,

Company

on4ine at

com

This warranty does not cover pick up,
delivery, or house calls; however, if you
mail your appliance to a Hoover Factory
Service Center for warranty service,
transportation will be paid one way.
While this warranty gives you specific
legal rights, you may also have other
rights which vary from state to state.

• Incorrect carpet height setting
• Move nozzle control knob to lower
setting

Possible
Possible

Fui| One

Disconnect cleaner from electrical
outlet.

6. Remove agitator shield (see Fig.
3-13) and remove any loose debris
which may have accumulated under
it.

If further assistance is needed, or if
there are questions concerning this warranty or the availability of warranty service outlets, write or phone the
Consumer Response Center, The Hoover
Company, 101 East Maple St., North
Canton, Ohio 44720.
Phone 1-330-499-9499.
In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8,
1-800-263-6376.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 12
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Wed Apr 04 21:06:53 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

HOOVER Vacuum, Upright Manual L0522973

Navigation menu

Versions of this User Manual:

Views

Navigation