HP Setup And Support Guide C00667505

7800 c00667505

User Manual: HP Setup and Support Guide

Open the PDF directly: View PDF PDF.
Page Count: 34

HP Scanjet 7800
Setup and Support Guide
Copyright and license
© 2006 Copyright Hewlett-Packard
Development Company, L.P.
Reproduction, adaptation or translation
without prior written permission is
prohibited, except as allowed under the
copyright laws.
The information contained herein is
subject to change without notice.
The only warranties for HP products
and services are set forth in the express
warranty statements accompanying
such products and services. Nothing
herein should be construed as
constituting an additional warranty. HP
shall not be liable for technical or
editorial errors or omissions contained
herein.
Trademark credits
ENERGY STAR is a U.S. registered
service mark of the United States
Environmental Protection Agency.
Microsoft and Windows are registered
trademarks of Microsoft Corporation.
Contents
1 How to get started.................................................................................................2
Step 1. Check the box contents .............................................................................2
Step 2. Install the software .....................................................................................3
Step 3. Connect the power supply .........................................................................3
Step 4. Connect the USB cable ..............................................................................4
Step 5. Prepare the scanner for use ......................................................................5
Step 6. Test the installation ....................................................................................6
Scanning software CDs ..........................................................................................6
Power Save mode or Instant Lamp Warm-up mode ..............................................8
2 How to use the scanner buttons and card slot...................................................9
Scanner buttons .....................................................................................................9
Card slot ...............................................................................................................10
3 Special features...................................................................................................11
4 How to set up and use profiles..........................................................................12
Set up a profile with HP Smart Document Scan Software ...................................12
Assign profile numbers with the Button Settings Utility ........................................13
Modify a profile with HP Smart Document Scan Software ...................................13
Import and export profiles .....................................................................................13
Customizable profile labels ..................................................................................15
5 Where to get additional information..................................................................16
HP Scanjet 7800 User Guide ...............................................................................16
HP Smart Document Scan Software help ............................................................16
Button Settings Utility help ...................................................................................17
6 Care and maintenance........................................................................................18
7 Troubleshooting..................................................................................................19
Installation dialog box does not display ................................................................19
Scanner error codes .............................................................................................19
Other sources for help ..........................................................................................19
Scanner does not work after installation ..............................................................19
8 Product support ..................................................................................................22
Accessibility ..........................................................................................................22
HP Scanjet Web site .............................................................................................22
Support process ...................................................................................................22
9 Regulatory information and product specifications .......................................24
Scanner specifications .........................................................................................24
Environmental specifications ................................................................................24
Regulatory information .........................................................................................25
Recycle and restricted material information .........................................................25
Disposal of Waste Equipment by Users in Private Households in the European
Union ....................................................................................................................25
10 Hewlett-Packard limited warranty statement ...................................................27
Regions ................................................................................................................28
A Scanner error codes............................................................................................32
Setup and Support Guide 1
1How to get started
Follow these steps to set up the scanner:
Step 1. Check the box contents
Step 2. Install the software
Step 3. Connect the power supply
Step 4. Connect the USB cable
Step 5. Prepare the scanner for use
Step 6. Test the installation
Scanning software CDs
Power Save mode or Instant Lamp Warm-up mode
Step 1. Check the box contents
Unpack the scanner hardware. Be sure to remove any shipping tape.
1
2
3
4
5
6
7
1HP Scanjet 7800 scanner
2Power supply
3USB cable
4Scanning software CDs (For more information, see Scanning software
CDs.)
5Profile labels
6Setup and Support Guide (this book)
7Paper-path cleaning cloth (for later maintenance use)
2HP Scanjet 7800 scanner
Step 2. Install the software
Caution Do not connect the USB cable to the computer yet. Install the scanning
software before connecting the USB cable.
1. Insert the HP Smart Document Scan Solution CD that came with the scanner into
the computer CD drive.
Wait for the installation dialog box to display. If the installation dialog box does not
display after a few moments, see Installation dialog box does not display.
2. Click Install Software to install the scanning software. Follow the onscreen
instructions to complete the scanning software installation.
Note There are many options for other software, including some third-party
solutions. See Scanning software CDs for details. If you have any questions
about what scanning software to install, click the How do I choose? button.
Step 3. Connect the power supply
The power supply has an attached cable that plugs into the back of the scanner. The
connector on the end of this cable has a green LED that is on when the power supply is
functioning correctly.
The power supply also has an AC cable that is connected to the power supply on one
end and plugged into a power outlet or surge protector on the other end.
1. Plug the AC cable into the back of the power supply.
2. Plug the other end of the AC cable into a power outlet or a surge protector.
Setup and Support Guide 3
3. Check that the green LED on the power supply cable connector is on.
If the green LED is not on, ensure that power is available to the power outlet or
surge protector that the AC cable is plugged into.
If power is available to the power outlet or surge protector but the green LED is
still not on, the power supply might be defective. Contact HP Support for
assistance.
4. If the green LED is on, plug the power supply into the back of the scanner.
5. Press the Power rocker switch on the back of the scanner to the on position to turn
the scanner on.
Step 4. Connect the USB cable
Caution Be sure you install the HP Smart Document Scan Software before
connecting the scanner to your computer with the USB cable. See Step 2. Install
the software.
Use the USB cable that came with the scanner to connect the scanner to the computer.
1. Connect the square end of the cable to the scanner.
Chapter 1
4HP Scanjet 7800 scanner
2. Connect the rectangular end of the cable to the computer.
Step 5. Prepare the scanner for use
1. For longer originals, extend the document feeder extension.
2. Extend the output tray.
Setup and Support Guide 5
Step 6. Test the installation
Caution Before placing an item in the document feeder, make sure that the item
does not contain wet glue, correction fluid, or other substances that can be
transferred to the interior of the scanner.
Make sure there are no curls, wrinkles, staples, paper clips, or any other attached
material. Sheets should not be stuck together.
1. Place a single page in the document feeder. The page should be face down, with
the top of the page pointing down ( ).
2. Adjust the paper guides. The paper guides must be touching both sides of the page
to work properly. Please ensure that the page is straight and the guides are against
the edges of the page.
3. Press the Scan Document To ( ) button.
The page will feed through the scanner. A scan of the page should appear on your
computer screen. This confirms that the installation was successful.
If a scan of the page does not appear on your computer screen, see
Troubleshooting.
4. Delete the scan.
5. Install any additional software that you want to use.
Scanning software CDs
This section describes the scanning and document-management software programs that
come with the scanner.
In addition to the HP software programs, there are several non-HP software programs
included. The non-HP software programs are not offered as substitutes for the HP
scanning software are not available for all scanner models and countries/regions.
Chapter 1
6HP Scanjet 7800 scanner
HP Smart Document Scan Software CD
Programs Software use Supported operating
systems
HP Smart
Document Scan
Software
Use to create high-quality scans from
multi-page documents and to
automate scanning tasks you perform
often.
Microsoft® Windows®
98 SE, Me, 2000, and
XP
This program is not
available in Asian
languages for Windows
98 SE and Me.
ISIS/TWAIN
drivers
These drivers are necessary for using
the scanner with standard business
applications and customized
software. They meet the minimum
requirement for the scanner to work
properly.
Windows 98 SE, Me,
2000, and XP
Kofax Virtual
Rescan Software
Use to create clearer and more
readable scans from colored or
damaged documents.
Windows 2000 and XP
NewSoft Presto!
BizCard Reader
Use to scan business cards. Windows Me, 2000, and
XP
Captiva QuickScan
Pro Demo
Use to scan, enhance, annotate, print,
and store black and white or color
documents.
Windows 98, Me, 2000,
and XP
ScanSoft PaperPort CD
Programs Software use Supported operating
systems
ScanSoft
PaperPort
Use to organize, find, and share paper
and PDF documents.
Windows 98 SE, Me,
2000, and XP for most
languages. Some
languages support only
Windows 2000 and XP.
IRIS Readiris Pro CD
Programs Software use Supported operating
systems
IRIS Readiris Pro Use to scan documents for editable
text.
Windows 98 SE, Me,
2000, and XP
Setup and Support Guide 7
Power Save mode or Instant Lamp Warm-up mode
The Power Save mode is the default for the scanner. In Power Save mode the scanner
lamp will time out and turn off automatically after a period of inactivity (about 15 minutes).
Instant Lamp Warm-up is also available. In this mode, although the scanner lamp will
time out and turn off automatically after a period of inactivity (about 15 minutes), it will
remain warm and ready to scan.
To switch from Power Save mode to Instant Lamp Warm-up select the Instant Lamp
Warm-up option on the General info tab of the Button Settings Utility. To switch back to
Power Save mode, clear the Instant Lamp Warm-up option.
Chapter 1
8HP Scanjet 7800 scanner
2How to use the scanner buttons
and card slot
Scanner buttons
Use the buttons on the scanner front panel to start a scan, select a profile for a scan, and
configure some scanner settings.
2
1
5
3
4
Icon Button name Description
1Scan Document To Start a scan (after selecting a
profile).
2Copy Start a copy (after selecting the
number of copies).
3Select Profile Number or
Number of Copies
Select a profile (before
scanning) or the number of
copies (before copying).
The selected profile number or
number of copies is displayed
on the LCD panel.
4Cancel Cancel a scan or copy in
progress.
5Button Settings Open the Button Settings Utility
where you can work with
profiles or view maintenance
information.
For more information about the scanner buttons than is provided in this chapter, see the
scanner user guide. For information about the scanner user guide, see Where to get
additional information.
Setup and Support Guide 9
Card slot
Use the card slot on the back of the scanner to scan items such as business cards, drivers
licenses, identification cards, insurance, and other cards.
Caution Do not use cards with raised characters, such as credit cards.
Place cards into the card slot face down with the top of the card pointing to the left ( ).
Note Be sure to scan only one card at a time.
Chapter 2
10 HP Scanjet 7800 scanner
3Special features
In addition to the standard scanning tools, these special features are available with the
included software.
Feature Description
Profiles You can set up and use profiles that contain all settings
necessary for scanning tasks such as:
Document processing
Saving in different file formats (i.e. searchable or
non-searchable PDF files) using automatic naming
mechanisms
Sending to different destinations such as FTP,
Microsoft SharePoint, or other applications
Preview pages Using preview pages, you can check the quality of
images before accepting and completing a scan. You
can also crop images, which is useful when scanning
small items such as a drivers license or a photo.
Page management You can view, edit, delete, insert, and reorder pages.
You can also have the scanner automatically delete
blank pages.
File management You can scan all pages to a single file, scan each page
to a separate file, or scan to separate files based on bar
codes or blank pages in the original.
Optical Character
Recognition (OCR)
With OCR software you can scan originals as editable
text that you can send to your favorite application.
Links You can set up profiles to send files to different
destinations via local or global network connections.
Wide range of sizes You can scan originals ranging from legal-size paper to
checks.
You can use the card slot on the back of the scanner to
scan items such as business cards, drivers licenses,
identification cards, insurance, and other cards.
Setup and Support Guide 11
4How to set up and use profiles
An HP Smart Document Scan Software profile contains settings for scanning,
processing, and saving or sending scanned documents. You can set up profiles for use
with the Scan Document To button. The profiles provide a fast, efficient way to scan.
You can configure each profile to perform specific scanning functions that you use often.
For example, if you frequently need to scan originals at 200 dpi color, create a PDF file,
and save the file in a folder named Archives within a folder named 2005, you can create
a profile with the necessary settings to accomplish this task.
Use HP Smart Document Scan Software to set up and modify profiles. Use the Button
Settings Utility to assign a number to each profile. After you have set up a profile, you
can use the same settings simply by selecting the profile in the LCD of the front panel.
Set up a profile with HP Smart Document Scan Software
Assign profile numbers with the Button Settings Utility
Modify a profile with HP Smart Document Scan Software
Import and export profiles
Customizable profile labels
Set up a profile with HP Smart Document Scan Software
1. To open HP Smart Document Scan Software, do one of the following:
Double-click the HP Smart Document Scan Software icon on the computer
desktop.
–Click Start, point to Programs or All Programs, point to HP, point to
Scanjet, point to 7800, and then click HP Smart Document Scan Software.
2. Click New.
The Create New Profile dialog box is displayed.
3. In the Profile name box, type the name you want or accept the default name.
Tip You might want to set up the new profile based on an existing one. To
do so, check the Copy settings from profile check box and select an
existing profile from the list.
4. Click Continue.
The Profile Settings dialog box is displayed.
5. Use the Scan, Process, and Destination tabs to select the settings for the profile.
If you have set up the new profile based on an existing one, the existing profile's
settings are displayed. Otherwise, the new profile's settings, such as paper size,
target folder, etc., default to the most commonly used values.
6. After completing all settings go back to the Profile tab to summarize the most typical
characteristics of the profile (such as document types and formats, separation
criterion, destination link) in the Description box.
7. Click OK.
12 HP Scanjet 7800 scanner
For more information, see the HP Smart Document Scan Software help. Double-click the
HP Smart Document Scan Software icon on the computer desktop, and then click
Help in the toolbar menu.
Assign profile numbers with the Button Settings Utility
Use the Button Settings Utility to assign each profile to a number. Profiles represented
as numbers are easily selected from the LCD.
Note Because the profile number in the LCD panel returns to 01 after being idle
for 20 seconds, it is a good idea to assign commonly used profiles to lower
numbers.
1. To open the Button Settings Utility, do one of the following:
Double-click the Button Settings Utility icon on the computer desktop.
Press the Button Settings ( ) button on the front panel of the scanner.
–Click Start, point to Programs or All Programs, point to HP, point to
Scanjet, point to 7800, and then click Button Settings Utility.
2. Select the button number in the Select button to configure area of the dialog box.
3. Click a profile name in the Choose profile for selected button list.
4. Click OK.
Modify a profile with HP Smart Document Scan Software
To modify a profile, follow these steps:
1. To open HP Smart Document Scan Software, do one of the following:
Double-click the HP Smart Document Scan Software icon on the computer
desktop.
–Click Start, point to Programs or All Programs, point to HP, point to
Scanjet, point to 7800, and then click HP Smart Document Scan Software.
2. Select the profile that you want to modify from the Select a scan profile list.
3. Click Edit.
For more information, see the HP Smart Document Software help. Double-click the HP
Smart Document Scan Software icon on the computer desktop, and then click Help in
the toolbar menu.
Import and export profiles
Profiles can be exported into and imported from an XML file so that administrators can
set up profiles for a workgroup, users can transfer their profiles from one machine to
another, and users can share custom profiles with each other.
Setup and Support Guide 13
For more information, see the HP Smart Document Scan Software help. Double-click the
HP Smart Document Scan Software icon on the computer desktop, and then click
Help in the toolbar menu.
Chapter 4
14 HP Scanjet 7800 scanner
Customizable profile labels
Use the customizable profile labels included with the scanner to list up to twelve
commonly used profile numbers and profiles associated with them. The label can be
attached directly to the pull-down tray on the front of the scanner.
Sample profile label
For a template that you can print if you need additional customizable profile labels, use
the label_template.doc file located on the scanner software CD.
To customize and print a profile label, follow these steps:
1. Open the template in Microsoft Word.
2. Double-click the text form field to the right of the profile number. The dialog box is
displayed.
3. Click in the Default text field, and then enter a short description of the profile.
4. Repeat steps 2 and 3 for each profile description you want to enter.
5. Click OK.
6. Before printing on the label sheet, print the label on a plain sheet of paper. Place
the test print over a label sheet to verify that the text aligns with the label cutout.
7. Print on the label sheet.
8. Place the label on the pull-down tray on the front of the scanner.
Setup and Support Guide 15
5Where to get additional
information
The scanner comes with several sources of information about using the scanner and the
scanning software.
HP Scanjet 7800 User Guide
HP Smart Document Scan Software help
Button Settings Utility help
HP Scanjet 7800 User Guide
The scanner user guide provides the information you need to know for using, maintaining,
and troubleshooting the scanner. The scanner user guide is the primary source for
scanner information. The user guide is available as a PDF file, so that you can print all
or parts of it, and as a screen-readable CHM.
To open the user guide PDF:
Click Start, point to Programs or All Programs, point to HP, point to Scanjet, point
to 7800, and then click User Guide.
For a PDF version of the user guide in another language:
1. Insert the HP Smart Document Scan Solution CD that came with the scanner into
the computer CD drive.
Wait for the installation dialog box to display.
2. Click View or print guides.
A list of languages is displayed.
3. Click the language that you want.
A list of guides is displayed.
4. Click Printable User Guide.
For a screen-readable CHM version of the user guide:
1. Insert the HP Smart Document Scan Solution CD that came with the scanner into
the computer CD drive.
Wait for the installation dialog box to display.
2. Click View or print guides.
A list of languages is displayed.
3. Click the language that you want.
A list of guides is displayed.
4. Click Onscreen User Guide.
HP Smart Document Scan Software help
You can use HP Smart Document Scan Software help to learn how to use HP Smart
Document Scan Software features, such as creating and editing profiles.
To open HP Smart Document Scan Software help, click Help on the HP Smart Document
Scan Software toolbar.
16 HP Scanjet 7800 scanner
Button Settings Utility help
If HP Smart Document Scan Software is installed on the computer, you can use the
Button Settings Utility help to learn what options are available for configuring the scanner
profiles and how to find information about scanner status and maintenance.
To open the Button Settings Utility help, click Help on the Button Settings Utility dialog
box.
Setup and Support Guide 17
6Care and maintenance
Occasional cleaning of the scanner helps ensure higher-quality scans. The amount of
care necessary depends upon several factors, including the amount of use and the
environment. You should perform routine cleaning as necessary.
For instructions about maintaining the scanner, see the scanner user guide. For
information about the scanner user guide, see Where to get additional information.
Caution Before placing an item in the document feeder, make sure that the item
does not contain wet glue, correction fluid, or other substances that can be
transferred to the interior of the scanner.
Make sure there are no curls, wrinkles, staples, paper clips, or any other attached
material. Sheets should not be stuck together.
18 HP Scanjet 7800 scanner
7Troubleshooting
Installation dialog box does not display
Follow these steps if the installation dialog box does not display:
1. Click Start, and then click Run.
The Run dialog box is displayed.
2. In the Open box, type d:\setup.exe (where d: is the letter of your computer's CD
drive).
3. Click OK.
Scanner error codes
The scanner displays a blinking number on the LCD panel when it encounters a problem,
such as a paper jam. For more information, see Scanner error codes at the end of this
book.
Other sources for help
For more troubleshooting help with the scanner hardware or software, see Where to get
additional information.
Scanner does not work after installation
If the scanner does not work after installation, you might see one of the following
messages displayed on the computer:
The scanner could not be initialized.
The scanner could not be found.
An internal error has occurred.
The computer cannot communicate with the scanner.
Try the following to fix the problem:
Step 1. Check the cables
Verify that the cable connections are in working order.
Power supply
The power supply has an attached cable that plugs into the back of the scanner. The
connector on the end of this cable has a green LED that is on when the power supply is
functioning correctly.
Setup and Support Guide 19
The power supply also has an AC cable that is connected to the power supply on one
end and plugged into a power outlet or surge protector on the other end.
The power cable is connected between the scanner and a power outlet.
1. Check that the power rocker switch is in the on position.
2. Check that the green LED on the power supply cable connector is on.
3. If the green LED is not on, ensure that power is available to the power outlet or surge
protector that the AC cable is plugged into.
4. If power is available to the power outlet or surge protector but the green LED is still
not on, the power supply might be defective. Contact HP Support for assistance.
USB cable
Check the physical connection to the scanner:
Use the cable that was included with the scanner. Another USB cable might not be
compatible with the scanner.
Ensure that the USB cable is securely connected between the scanner and the
computer or USB hub. The trident icon on the USB cable faces up when the cable
is properly connected to the scanner.
To troubleshoot the USB connection:
1. Do one of the following tasks depending on how the scanner is connected to the
computer:
If the USB cable is connected to a USB hub or a docking station for a laptop,
disconnect the USB cable from the USB hub or the docking station, and then
connect the USB cable directly to the computer.
If the USB cable is directly connected to the computer, plug it into another USB
port on the computer.
Remove all other USB devices from the computer except for the keyboard and
the mouse.
2. Turn the scanner off and then on.
3. Restart the computer.
4. After the computer has restarted, try using the scanner.
If the scanner works and you changed the way it was connected to the computer in
step 1, the communication problem might involve the USB hub or docking station.
Leave the scanner directly connected to the computer.
If the scanner does not work, uninstall and then reinstall the HP scanning software.
Step 2. Uninstall and then reinstall the HP scanning software
If checking the scanner cable connections did not solve the problem, the problem might
have occurred because of an incomplete installation. Try uninstalling and then
reinstalling the HP scanning software.
1. Disconnect the USB cable from the computer.
2. Do one of the following tasks to open the Control Panel:
Windows XP: Click Start, and then click Control Panel.
Windows 98 SE, Me, or 2000: Click Start, point to Settings, and then click
Control Panel.
3. Double-click the Add/Remove Programs icon.
Chapter 7
20 HP Scanjet 7800 scanner
A list of currently installed programs is displayed.
4. Select HP Scanjet 7800 Specialized Document Scanning, and then click
Remove or Change/Remove.
5. Follow the onscreen instructions.
If prompted to remove or repair the software, click Remove.
If prompted to restart the computer, click No.
6. After the HP scanning software is removed, unplug the scanner from the electrical
outlet.
7. Restart the computer.
8. Insert the HP Smart Document Scan Solution CD in the computer CD drive.
9. Follow the onscreen instructions to install the HP scanning software.
10. After the HP scanning software has installed, connect the scanner to an electrical
outlet, turn on the scanner, and then use the USB cable to connect the scanner to
the computer.
11. Follow the onscreen instructions.
Setup and Support Guide 21
8Product support
This section describes the options for product support.
Accessibility
HP Scanjet Web site
Support process
Accessibility
The following accessibility options are available on this scanner:
The LCD Reader displays the contents of the scanner’s LCD as it changes. It
enables PC accessibility tools to help the user read what is being displayed on the
LCD.
To prevent buttons from being accidentally pushed, you can use the Button Disable
Utility to disable the buttons. You can use the same utility to re-enable the buttons.
For more information about the LCD Reader and Button Disable Utility, see the scanner
user guide. For information about the scanner user guide, see Where to get additional
information.
Customers with disabilities can get help by visiting www.hp.com/hpinfo/community/
accessibility/prodserv/.
HP Scanjet Web site
Visit www.hp.com and select your country/language at the top of the page. On the country
page, select scanners from the list of products. Use this site for a variety of information:
Learn tips for scanning more effectively and creatively.
Gain access to HP Scanjet driver updates and software.
Register your product.
Subscribe to newsletters, driver and software updates, and support alerts.
Purchase scanner supplies.
Support process
The HP support process works most effectively if you perform the following steps in the
order specified:
1. Review the onscreen Help and user guide for the software and scanner, including
the troubleshooting sections.
2. If you have access to the Internet, you can obtain a wide range of information about
your scanner. Visit the HP Technical Support Web site for product help, drivers, and
software updates at www.hp.com/support.
3. Use HP e-support. If you have access to the Internet, connect with HP by going
to www.hp.com/support. Select Support and Troubleshooting, enter the scanner
model information, and then click the double arrows. At the bottom of the next page,
select e-mail under Collaborative Resources. You will receive a personal reply
22 HP Scanjet 7800 scanner
from an HP Product Support technician. E-mail support is available in the languages
listed at that Web site.
4. If you are a customer in the United States, go to step 5. Otherwise, contact your
local HP dealer. If your scanner has a hardware failure, take it to your local HP dealer
for a solution. Service is free during your scanner’s limited warranty period. After the
warranty period, the dealer will quote a service charge.
5. Contact the HP Product Support Center for support by phone. Please consult the
following Web site to check the details and conditions of phone support in your
country/region: www.hp.com/support. Call HP while you are in front of your computer
and scanner. For faster service, please be prepared to provide the following
information:
Scanner model number (located on the scanner)
Scanner serial number (located on the scanner)
Computer operating system
Version of the scanner software (located on the scanner’s CD label)
Messages displayed at the time the situation occurred
The applicable conditions for HP phone support are subject to change without notice.
Telephone support is free from the date of purchase for the period specified unless
otherwise noted.
Setup and Support Guide 23
9Regulatory information and
product specifications
This section contains regulatory information and product specifications for the HP
Scanjet 7800 scanner and accessories.
Scanner specifications
Environmental specifications
Regulatory information
Recycle and restricted material information
Disposal of Waste Equipment by Users in Private Households in the European Union
Scanner specifications
Name Description
Scanner type Duplex sheet-feed scanner
Size Width: 320 mm (12.6 in), Depth: 270 mm (10.63 in), Height:
312 mm (12.28 in)
Weight 5.4 kg (11.8 lbs)
Scanning element Charge-coupled device (CCD)
Interface USB 2.0 high-speed
Optical resolution 1200 x 1200 dpi hardware
AC power 100-240V~, 50/60Hz, 1.5A
Power
consumption
For power consumption, data see the regulatory_supplement.htm
file on the HP Smart Document Scan Software CD.
Your HP scanner is ENERGY STAR® compliant. As an ENERGY
STAR® partner, Hewlett-Packard Company has determined that
this product meets the ENERGY STAR® guidelines for energy
efficiency.
Environmental specifications
Name Description
Temperature Operating the scanner: 10° to 35° C (50° to 95° F)
Storage: -40° to 60° C (-40° to 140° F)
24 HP Scanjet 7800 scanner
Name Description
Relative humidity Operating the scanner: 15 percent to 80 percent noncondensing
10° to 35° C (50° to 95° F)
Storage: up to 90 percent at 0° to 60° C or (32° to 140° F)
Regulatory information
Regulatory Model Identification Number: For regulatory identification purposes your
product is assigned a Regulatory Model Number. The Regulatory Model Number for your
product is FCLSD-0601. This regulatory number should not be confused with the
marketing name (HP Scanjet 7800) or product numbers (L1960A, L1965A, L1966A,
L1967A). Additional regulatory information about your scanner can be found on the
regulatory_supplement.htm file on the HP Smart Document Scan Software CD.
Note The regulatory label (with the part numbers and serial numbers) is on the
bottom of the scanner. However, when you insert the output paper tray on the
bottom of the scanner, you will cover up the regulatory label.
Recycle and restricted material information
Recycling
Product restricted material
Recycling
Recycling, energy consumption, and environmental information is located on the HP
Smart Document Scan Software CD that comes with the scanner. On the CD, browse
for the file named recycle_supplement.pdf.
Product restricted material
This HP product contains the following material that might require special handling at
end-of-life: Mercury in the scanner fluorescent lamp and transparent materials adapter
(< 5 mg).
For recycling information, contact www.hp.com/go/recycle, your local authorities, or the
Electronic Industries Alliance at www.eiae.org.
Disposal of Waste Equipment by Users in Private
Households in the European Union
(continued)
Setup and Support Guide 25
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to dispose
of your waste equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment
for recycling, please contact your local city office, your household waste disposal service,
or the shop where you purchased the product.
Chapter 9
26 HP Scanjet 7800 scanner
10 Hewlett-Packard limited warranty
statement
HP Scanjet 7800 scanner
Duration of limited warranty
Regions
Duration of limited warranty
1. HP warrants to you, the end-user customer, that HP hardware, accessories, and
supplies will be free from defects in materials and workmanship after the date of
purchase, for one year. If HP receives notice of such defects during the warranty period,
HP will, at its option, either replace or repair products which prove to be defective.
Replacement products may be either new or equivalent in performance to new.
2. HP warrants to you that HP software will not fail to execute its programming instructions
after the date of purchase, for the period specified above, due to defects in material and
workmanship when properly installed and used. If HP receives notice of such defects
during the warranty period, HP will replace software which does not execute its
programming instructions due to such defects.
3. HP does not warrant that the operation of HP products will be uninterrupted or error
free. If HP is unable, within a reasonable time, to repair or replace any product to a
condition as warranted, you will be entitled to a refund of the purchase price upon prompt
return of the product.
4. HP products may contain remanufactured parts equivalent to new in performance or
may have been subject to incidental use.
5. This warranty does not apply to defects resulting from (a) improper or inadequate
maintenance or calibration, (b) software, interfacing, parts, or supplies not supplied by
HP, (c) unauthorized modification or misuse, (d) operation outside of the published
environmental specifications for the product, or (e) improper site preparation or
maintenance.
6. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE
EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION, WHETHER WRITTEN
OR ORAL, IS EXPRESSED OR IMPLIED, AND HP SPECIFICALLY DISCLAIMS ANY
IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY
QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. Some countries, states, or
provinces do not allow limitations on the duration of an implied warranty, so the above
limitation or exclusion might not apply to you. This warranty gives you specific legal rights,
and you might also have other rights that vary from country to country, state to state, or
province to province.
7. HP's limited warranty is valid in any country or locality where HP has a support
presence for this product and where HP has marketed this product. The level of warranty
service you receive may vary according to local standards. HP will not alter the form, fit,
or function of the product to make it operate in a country in which it was never intended
to function for legal or regulatory reasons.
8. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS
WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT
Setup and Support Guide 27
AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR
LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL
(INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE. Some countries, states, or provinces do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
9. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE
EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY AND
ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO
THE SALE OF THIS PRODUCT TO YOU.
Regions
Asia Pacific
Americas
Europe, Middle East, and Africa
Asia Pacific
Service and support
HP Technical Support is your easy, fast, and direct Web resource for product assistance,
diagnostics, and driver downloads. It is your source for all service and support needs.
Receive award-winning assistance 24 hours per day, 7 days a week at www.hp.com/
support.
Upgraded warranty option
You can upgrade your standard factory warranty to three years “Next business day”
exchange with the HP Care Pack service. Service coverage begins on product purchase
date and the pack must be purchased and registered by HP within the first year of product
purchase.
This warranty upgrade offers maximized uptime and productivity, the convenience of
door-to-door pickup with delivery, packaging and freight prepaid by HP.
For more information please refer to: www.hp.com/hps/index_support
Post-warranty period service and support
After the warranty period of your HP product, you have different options depending on
the region where you reside. See Call Options and Service Options for more information.
Call options
You can call the Support Center. A "per incident" fee will be charged.
Service options
You can replace the hardware for a fee. You will have access to HP Technical
Support at www.hp.com/support for 3 years.
Americas
Chapter 10
28 HP Scanjet 7800 scanner
Service and support
HP Technical Support is your easy, fast, and direct Web resource for product assistance,
diagnostics, and driver downloads. It is your source for all service and support needs.
Receive award-winning assistance 24 hours per day, 7 days a week at www.hp.com/
support.
Upgraded warranty option
You can select the following upgraded warranty option (available in the U.S. only):
Standard Next Day Exchange
Post-warranty period service and support
After the warranty period of your HP product, you have different options depending on
the region where you reside. See Call Options and Service Options for more information.
Call options
Latin America: You can call the Support Center. A fee will be charged.
United States and Canada: You can call the Support Center, however there will be
a "per incident" fee.
Service options
Latin America: You can repair or return hardware for a fee OR upgrade replacement
for a fee.
United States: You can replace hardware for a fee OR upgrade for a fee.
Canada: You can repair or return hardware, and for a fee have a 3 to 5 day
turnaround time.
Any customer will have access to HP Technical Support at www.hp.com/support for
3 years.
Europe, Middle East, and Africa
Names and addresses of the HP entities which grant HP's Limited Warranty
(manufacturer's warranty) in your country are as follows.
Setup and Support Guide 29
You may also have statutory legal rights against the seller on the basis of the purchase
agreement in addition to the manufacturer's warranty, which are not restricted by this
manufacturer's warranty.
Service and support
HP Technical Support is your easy, fast, and direct Web resource for product assistance,
diagnostics, and driver downloads. It is your source for all service and support needs.
Chapter 10
30 HP Scanjet 7800 scanner
Receive award-winning assistance 24 hours per day, 7 days a week at www.hp.com/
support.
Upgraded warranty option
You can upgrade your standard factory warranty to three years “Next business day”
exchange with the HP Care Pack service.
Service coverage begins on product purchase date and the pack must be purchased and
registered by HP within the first year of product purchase. You will benefit from a
dedicated access (phone number) to HP hardware technical support. In case it is
determined that your product needs replacement, HP will ship you a replacement product
on the next contracted business day free of charge.
This warranty upgrade offers maximized uptime and productivity, the convenience of
door-to-door pickup with delivery, and packaging and freight prepaid by HP.
Europe/Middle East/Africa warranty upgrade Web sites
www.hp.com/fr/extension-garantie for France
www.hp.com/uk/warranty-extension for UK
www.hp.nl/garantie-uitbreiding for Holland
www.hp.com/it/estensione-garanzia for Italy
www.hp.com/es/extensiones-garantia for Spain
www.hp.com/de/garantie-erweiterung for Germany
www.hp.com/se/garantiforlangning for Sweden
www.hp.com/dk/garantiudvidelse for Denmark
www.hp.com/fi/takuunlaajennus for Finland
www.hp.com/be/garantie-uitbreiding for Belgium (dutch)
www.hp.com/be/extension-garantie for Belgium (french)
www.hp.com/pt/extensao-de-garantia for Portugal
www.hp.com/ie/warranty-extension for Ireland
Countries not listed : For more information, please check with your local reseller.
Post-warranty period service and support
After the warranty period of your HP product, you have different options depending on
the region where you reside. See Call Options and Service Options for more information.
Call options
You can go back to the dealer or call the Customer Support Center, however there
will be a "per incident" fee.
Service options
You can take product back to the dealer or call the Customer Support Center for
replacement of product for a fee. You will have access to HP Technical Support at
www.hp.com/support for 3 years.
Setup and Support Guide 31
AScanner error codes
The scanner displays a blinking number on the LCD under certain error conditions. For help
responding to an error code, see the appropriate topic below.
Error 02 SDRAM Error
Press the Power rocker switch to the off position to turn the scanner off. Wait 30 seconds, and then
press the Power rocker switch to the on position to turn the scanner on. If the message is still
displayed, contact HP Support. For more information, see Product support.
Error 03 USB Error
1. Check the USB connection between the scanner and the computer. For more help, see Step
4. Connect the USB cable.
2. Verify that the scanner is recognized by the computer. If not, try uninstalling and then
reinstalling the software.
3. If the problem persists, contact HP Support. For more information, see Product support.
Error 04 Paper Jam
A document feeder paper jam has been detected. Open the hatch and clear the jam.
Error 08 Hatch Open
The hatch on the document feeder is open or not securely latched. Please close the hatch by
pressing until you hear a click, and then rescan.
Error 09 NVRAM ACCESS Error
Press the Power rocker switch to the off position to turn the scanner off. Wait 30 seconds, and then
press the Power rocker switch to the on position to turn the scanner on. If the message is still
displayed, contact HP Support. For more information, see Product support.
Error 10 Motor Fail
Press the Power rocker switch to the off position to turn the scanner off. Wait 30 seconds, and then
press the Power rocker switch to the on position to turn the scanner on. If the message is still
displayed, contact HP Support. For more information, see Product support.
Error 23 Lamp Error
Press the Power rocker switch to the off position to turn the scanner off. Wait 30 seconds, and then
press the Power rocker switch to the on position to turn the scanner on. If the message is still
displayed, contact HP Support. For more information, see Product support.
Error 24 Pick Failure
The document feeder cannot pick up the paper or the paper is jammed. Follow these steps to resolve
the error:
1. Remove the paper from the document feeder.
2. Sort through the stack to make sure the sheets are not stuck together.
3. Make sure the paper meets the size and weight specifications, as specified in the onscreen
user guide.
32 HP Scanjet 7800 scanner

Navigation menu