HP Dc7800 SFF IPSM Illustrated Parts & Service Map Compaq Small Form Factor Business PC C01155699
HP Compaq dc7800 SFF HP Compaq dc7800 SFF shared.swissparts.ch - /Manuals/HP/Notebook/Compaq's/
User Manual: HP Illustrated Parts & Service Map - HP Compaq dc7800 Small Form Factor Business PC
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Illustrated Parts & Service Map HP Compaq dc7800 Small Form Factor Business PC © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. HP shall not be liable for technical or editorial errors or omissions contained herein. Intel, Pentium, Intel Inside, and the Intel logo are trademarks or registered trademarks of the Intel Corporation and its subsidiaries in the U. S. and other countries. Document Number 459786-001. 1st Edition September 2007. Cables 1 SATA HDD cable, 19 inch, 2 straight ends 2 Front I/O with USB and audio cables 391739-001 451143-001 3 Serial port cable assembly, 6-inch cable 453052-001 4 SATA ODD cable, 24 inch, 1 straight, 1 angled end 435263-001 5 Power/LED cable 435261-001 6 Diskette drive cable, 6 inch 454246-001 * 17.7-inch SATA cable, 1 straight end, 1 angled end 453317-001 *Not shown Key Specifications Keyboards (not illustrated) Processor Type Intel Core 2 Duo, Core 2 Quad, Pentium dual-core, Celeron RAM Type DDR2-SDRAM DIMMs, PC2-5300 (667 MHz) non-ECC or PC2-6400 (800 MHz) non-ECC Maximum RAM Supported 8 GB Expansion Slots • • • 1 PCIe-x16 2 PCIe-x1 1 PCI (low profile) Graphics Adapter Intel GMA 3100 integrated Drive Support • • • • I/O Interfaces PS/2, Basic USB, Basic USB SmartCard 2 SATA HDD 1 SATA Optical RAID 1 Support FDD, Media Card Reader, Removable HDD Serial (2, 1 optional), parallel (1), USB 2.0 (8), RJ-45 (1), front and rear audio jacks (2 each), PS/2 ports (2), VGA connector (1), USB header on system board Spare Parts 435302-xxx 435382-xxx 435385-xxx Arabic -171 Korean (Hangul) -KD1 Belgian -181 LA Spanish -161 BHCSY -B41 Norwegian -091 Brazilian Portuguese -201 PRC -AA1 Czech -221 Portuguese -131 Danish -081 Romanian* -271 Finnish -351 Russian -251 French -051 Slovakian -231 French Arabic -DE1 Spanish -071 French Canadian -121 Swedish -101 German -041 Swiss -111 Greek -151 Taiwanese -AB1 Hebrew -BB1 Thai -281 Hungarian -211 Turkish -141 International -B31 U.S. -001 Italian -061 U.K. -031 Japanese -291 *Not for 435385-xxx Mass Storage Devices (not illustrated) Diskette drive with bezel System Unit 1 Front bezel 451148-001 2 Access panel 451141-001 3 Chassis not spared 4 Power supply, 240W 437797-001 * Power supply, 240W, 80% efficient 437798-001 * Bezel blank, 5.25-inch 335937-001 5 Bezel blank, diskette drive 451151-001 6 Tower stand bracket 451150-001 431452-001 Media card reader, 3.5-inch 407187-001 Media card reader, 5.25-inch 412838-001 16X SATA DVD±RW and CD-RW drive with LightScribe 447310-001 16X SATA DVD-ROM drive 419496-001 48X CD-RW/DVD-ROM combo drive 419497-001 250 GB, 7200-RPM SATA hard drive, 8-MB cache 449980-001 160 GB, 7200-RPM SATA hard drive, 8-MB cache 449979-001 160 GB, 10000-RPM SATA hard drive, 16-MB cache 439995-001 80 GB, 7200-RPM SATA hard drive, 8-MB cache 449978-001 80 GB, 10000-RPM SATA hard drive, 16-MB cache 439994-001 * Not shown dc7800 Illustrated Parts & Service Map, SFF Chassis 459786-001 page 1 Standard and Optional Boards Miscellaneous Parts Memory modules 1 Chassis fan 451144-001 1 512 MB, PC2-5300, CL5 396520-001 2 Fan duct 451145-001 1 1 GB, PC2-5300, CL5 398038-001 3 Fansink with alcohol pad and factory-applied thermal grease 453053-001 1 2 GB, PC2-5300, CL5 450367-001 4 Backwall, LP, includes riser card assy 440498-001 1 512 MB, PC2-6400, CL6 418952-001 5 Backwall, FH 451140-001 1 1 GB, PC2-6400, CL6 418951-001 * Solenoid lock 451149-001 * Heatsink retention plate 453318-001 * Power switch/LED holder 370857-001 * Mouse, PS2, optical 417966-001 * Mouse, scroll 390937-001 * Mouse, optical 390938-001 * Battery, real-time clock 153099-001 * Internal speaker 394779-001 * Second serial port, LP 393601-001 * Second serial port, FH 392414-001 * Modem cable 198220-001 Other boards 2 Belkin 802.11a/g WLAN adapter for use in the United States and most of the world 391866-002 * Belkin 802.11a/g, WLAN adapter for use in the rest of the world 391866-001 * nVidia GeForce 8440 GS 256-MB video card with dual-link DVI-I and TV (S-Video) outputs. LP 445743-001 * nVidia GeForce 8440 GS 256-MB video card with DMS59 and TV (SVideo) outputs. LP 445744-001 * DVI-D ADD2 graphics 398333-001 * 1394 card 2 external, 1 internal port, FH 393308-001 * 1394 card 2 external, 1 internal port, LP 393307-001 * 802.11a/b/g, WLAN PCI card, international, LP 356296-B35 * HP dual-band wireless antenna PCI Adapter, LP 435269-001 * Intel, Gigabit NIC 398754-001 * Broadcom 5751 NetXtreme Gigabit Ethernet Controller, LP 435268-001 * Broadcom 5751 NetXtreme Gigabit Ethernet Controller, FH 430654-001 * Agere International 56K Modem 398661-001 * ReadyBoost module, 1 GB 455971-001 *Not shown LP = Low profile FH = Full height System Boards with thermal grease, alcohol pad, and CPU socket cover 3 System board 437793-001 * System board, excludes ES/CS 451139-001 Intel Celeron Processors with alcohol pad and thermal grease * 440, 512K cache, 2.00 GHz 449166-001 * 430, 512-KB cache, 1.8 GHz 449165-001 * 420, 512-KB cache, 1.8 GHz 449164-001 Modem RJ-11 adapters (not illustrated) Austrian 417561-011 Italian 316904-065 Belgian 316904-181 Netherlands 316920-335 Czechoslovakian 234963-221 Polish 316904-241 French 316904-051 Saudi Arabian 316904-AR1 German 316904-045 Scandinavian 382848-DH1 Greek 316904-151 Swiss 417562-111 Hungarian 234963-215 Turkish 316904-141 Israel 316904-BB1 United Kingdom 158593-035 Intel Pentium Dual Core Processors with alcohol pad and thermal grease * E2180, 1-MB cache, 2.00 GHz 457656-001 * E2160, 1-MB cache, 1.80 GHz 457622-001 Intel Core 2 Quad Processor with alcohol pad and thermal grease * Q6700, 8-MB cache, 2.66 GHz 455402-001 * Q6600, 8-MB cache, 2.40 GHz 452451-001 Intel Core 2 Duo Processors with alcohol pad and thermal grease * E6850, 4-MB cache, 3.00 GHz 450792-001 * E6750, 4-MB cache, 2.66 GHz 450791-001 * E6550, 4-MB cache, 2.33 GHz 450694-001 * E4500, 2-MB cache, 2.20 GHz 449452-001 * E4400, 2-MB cache, 2.00 GHz 449451-001 * Not shown LP = Low profile FH = Full height dc7800 Illustrated Parts & Service Map, SFF Chassis 459786-001 page 2 System Board Computer Setup Menu (Continued) Heading Option / Description Storage (cont) Storage Options • Removable Media Boot • Legacy Diskette Write • SATA Emulation DPS Self-Test - Allows you to execute self-tests on ATA hard drives. Boot Order - Allows you to specify boot order. • Shortcut to Temporarily Override Boot Order Security Setup Password - Allows you to set and enable the setup (Administrator) password. Power-On Password - Allows you to set and enable power-on password. Password Options - When any password exists allows you to lock legacy resources, enable/disable network server mode, specify password requirement for warm boot, and allows you to enable/disable Setup Browse Mode. Smart Cover (some models) - Allows you to lock/unlock cover lock and set status of cover removal sensor. Device Security (some models) - Enables/disables all I/O ports, audio, network controllers, SMBus controller, and embedded security devices. Network Service Boot - Enables/disables boot from OS on a server. System IDs - Allows you to set Asset tag, ownership tag, Chassis serial number, UUID, and keyboard locale setting. DriveLock Security - Allows you to assign/modify a hard drive password for added security. System Security (some models) - Allows you to enable/disable: • Data Execution Prevention • Virtualization Technology • Virtualization Technology Directed I/O • Trusted Execution Technology • Embedded Security Device Support • OS management of Embedded Security Device through OS • Virtual Appliance options • Smart Card BIOS Password Support System Board Connectors and Jumpers (position of some untitled components may vary in location) E49 Password P24 Front USB J9 Stacked RJ-45/Dual USB P3 CPU power J10 Quad stacked USB P5 Power button/LED J20 PCI slot 1 P52 Second serial port J21 PCI slot 2 P54 First serial port J31 PCIe X1, slot 1 P6 Internal speaker J32 PCIe X1, slot 2 P60 SATA0 J41 PCIE X16 P61 SATA1 J50 Parallel port P62 SATA4 J66 Keyboard connector P8 CPU fan J67 Mouse connector P9 Chassis fan J69 Video connector SW50 Clear CMOS J78 Double stacked line-out/line-in XBT1 Real-time-clock battery P1 Main power XMM1 DIMM 1 P10 Diskette drive XMM2 DIMM 2 P124 Hood lock XMM3 DIMM 3 P125 Hood sensor XMM4 DIMM 4 P150 Media reader/ReadyBoost connector XU1 Processor P23 Front audio Setup Security Level - Provides method to allow users limited access to change specified setup options without knowing Setup password. Power OS Power Management - Allows you to enable/disable Runtime Power Management, Idle Power Savings, ACPI S3 Hard Disk Reset, ACPI S3 PS2 Mouse Wakeup, USB Wake on Device Insertion (some models), Unique Sleep State Blink Rates. Hardware Power Management - Allows you to enable/disable SATA bus power management. Thermal - Allows you to control minimum permitted fan idle speed. Advanced Execute Memory Test (some models) -Restarts computer and executes POST memory test. System Setup and Boot BIOS Power-On - Allows you to set the computer to turn on at a preset time. Basic system information regarding system information, setup, power management, hardware, and passwords is maintained in the Setup Utility held in the system ROM. The Setup Utility is accessed by pressing the F10 key when prompted (on screen) to do so during the boot sequence. If the screen prompt opportunity is missed, a restart will be necessary. Onboard Devices - Allows you to set resources or disable onboard system devices. PCI Devices - Lists installed PCI devices with their IRQ settings and allows you to reconfigure IRQ or disable devices. PCI VGA Configuration - Allows you to specify which VGA controller will be used when multiple video adapters are available. Computer Setup Menu Heading Option/Description File System Information - Lists the following main system specifications: • • • • Product name SKU number (some models) Processor type/speed/stepping Cache Size (L1/L2) Power-On Options - Allows you to set: • POST mode - QuickBoot, FullBoot, or FullBoot every 1-30 days. • POST messages - Enable/disable • MEBx Setup prompt - Enable/disable or hidden/displayed • F9 prompt - Enable/disable • F10 prompt - Enable/disable • F12 prompt - Enable/disable • Factory Recovery Boot Support - Enable/disable • Option ROM prompt - Enable/disable • WOL After Power Loss - Enable/disable • Remote wakeup boot source - Remote server/local hard drive • After Power Loss - Off/on/previous state • POST delay - None, 5, 10, 15, or 20 seconds • Limit CPUID • • • • • Bus Options (some models) - Allows you to enable/disable PCI SERR# Generation and PCI VGA palette snooping. Device Options - Allows you to set: • Printer Mode - Bi-Directional, EPP & ECP, Output Only • Num Lock state at power-on - off/on • S5 Wake on LAN - enable/disable • Processor cache - enable/disable • Integrated video - enable/disable • Multi-Processor - enable/disable • Internal speaker - enable/disable • Monitor Tracking - enable/disable • NIC PXE Option ROM Download - enable/disable Memory size/speed/ no. channels Integrated MAC Address System BIOS Chassis serial number Asset tracking number About - Displays copyright notice. Set Time and Date - Allows you to set system time and date. Flash System ROM - Allows you to select a drive containing a new BIOS. Replicated Setup - Save to Removable Media and Restore from Removable Media Default Setup • Save Current Settings as Default • Restore Factory Settings as Default System Hardware Interrupts IRQ System Function IRQ Apply Defaults and Exit - Applies the selected default settings and clears any established passwords. 0 Timer Interrupt 8 Real-Time Clock 1 Keyboard 9 Unused 2 Interrupt Controller Cascade 10 Unused, available for PCI Save Changes and Exit - Saves changes to system configuration or default settings and exits Computer Setup. 3 Serial Port (COM B) 11 Unused, available for PCI 4 Serial Port (COM A) 12 Mouse Device Configuration - Lists all installed BIOS-controlled storage devices. The following options are available: • Diskette Type(Legacy Diskettes only)-3.5” 1.44 MB and 5.25” 1.2 MB • Drive Emulation • Emulation Type - ATAPI Zip drive, hard disk, legacy diskette, CD-ROM drive, and ATAPI LS-120 drive • Multisector Transfers • Translation Mode • Translation Parameters • SATA Default Values 5 Unused, available for PCI 13 Coprocessor 6 Diskette Drive 14 Primary ATA (IDE) Controller 7 Parallel Port (LPT 1) 15 Secondary ATA (IDE) Controller Ignore Changes and Exit - Exits Computer setup without applying or saving any changes. Storage dc7800 Illustrated Parts & Service Map, SFF Chassis 459786-001 System Function page 3 Error Conditions and Messages Failsafe Boot Block ROM The computer comes with a reprogrammable flash system ROM (read only memory). To upgrade the ROM, download the latest ROM BIOS image from the HP Web site (www.hp.com) and follow the online GUI/instructions. How It Is Established Feature Purpose Floppy drive controller Prevents the transfer of data to or from the floppy drive. Setup Utilities Device Boot Disabling Prevents booting from and or all of these devices: Internal or external USB, Internal ODD, or Internal FDD Setup Utilities Security Option Prevents use of computer until password is entered. Can apply to both initial startup and restart. Setup Utilities 1. Remove any bootable media from the computer and turn off power. BIOS Write Protect Restricts ability to change ROM BIOS without approval. Setup Utilities. 2. Insert a flash drive or CD containing the ROM BIOS in the root directory. The media must be formatted using the FAT12, FAT16, or FAT32 file system. USB Controller Allows you to disable or enable all USB devices. Setup Utilities Your system ROM includes a Failsafe Boot Block that is protected during the flash process and allows the computer to be restarted in the unlikely event of an unsuccessful ROM flash. If the system detects an invalid system ROM during the boot sequence, the Failsafe Boot Block attempts to locate a valid BIOS image on removable media. To recover from the Boot Block recovery mode complete the following steps: Boot Block Recovery 3. Turn on power to the system. 4. The system will automatically flash the ROM. After a successful flash, the system will either automatically restart or prompt the user to unplug the unit, wait 5 seconds, reattach the power cord, and then press the power button. Diagnostic LEDs NOTE: BitLocker prevents Windows Vista from booting when a CD containing the BIOS image file is in an optical drive. If BitLocker is enabled, remove this CD before attempting to boot to Windows Vista. LED Color LED Activity State/Message Power Green On Computer on Power Green 1 blink every 2 seconds Normal Suspend Mode Power Red 1 blink every second followed by a 2 second pause CPU thermal shutdown Power Red 3 blinks, 1 blink every second followed by a 2 second pause Processor not installed Power Red 4 blinks, 1 blink every second followed by a 2 second pause Power failure (power supply overload) Power Red 5 blinks, 1 blink every second followed by a 2 second pause Pre-video memory error 4. Before exiting, click File > Save Changes and Exit. Power Red 6 blinks, 1 blink every second followed by a 2 second pause Pre-video graphics error Changing a password: Power Red 7 blinks, 1 blink every second followed by a 2 second pause System board failure (ROM To change the Setup password, go to step 2. To change the Power-on password, go to step 3. Power Red 8 blinks, 1 blink every second followed by a 2 second pause Invalid ROM based on Checksum 2. To change the Setup password, as soon as the computer is turned on, press F10 when the monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if necessary. Power Red 9 blinks, 1 blink every second followed by a 2 second pause System powers on but is unable to boot Power Red 10 blinks, 1 blink every second followed by a 2 second pause Bad option card Power Red 11 blinks, 1 blink every second followed by a 2 second pause The current processor does not support a feature previously enabled on this system. none none System does not power on and LEDs are not flashing System unable to power on Password Security Establishing a Setup password: 1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart. 2. As soon as the computer is turned on, press F10 when the monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if necessary. If you do not press F10 when prompted, a restart will be necessary. 3. Select Security > Setup Password and follow the instructions on the screen. 1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart. 3. When the key icon appears, type your current password, a slash (/) or alternate delimiter character, your new password, another slash (/) or alternate delimiter character, and your new password again as shown: current password/new password/new password. NOTE: Type the new password carefully since the characters do not appear on the screen. 4. Press Enter. The new password will take effect the next time the computer is restarted. Common POST Error Messages Deleting a password Screen Message Probable Cause Recommended Action 1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart. 101-Option ROM Error 1. System ROM checksum error. 1. Verify ROM, reflash if required 2. Expansion board option ROM checksum 3. Clear CMOS memory, reboot To delete the Setup password, go to step 2. To delete the Power-On password, go to step 3. 2. To change the Setup password, as soon as the computer is turned on, press F10 when the monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if necessary. 3. When the key icon appears, type your current password followed by a slash (/) or alternate delimiter character as shown. Example: currentpassword/ 3. System board 103-System Board Failure DMA, timers 164-Memory Size Error and 201-Memory Error Incorrect memory configuration NOTE: For more information about Setup Utilities refer to the Computer Setup Menu on the previous page or in the Service Reference Guide. Processor type and speed Memory amount, mapping, and integrity Hardware peripheral availability/settings Hard drive type, space used/available System identification, asset tracking Insight Diagnostics may be found on the Documentation and Diagnostics CD that shipped with the computer. The tool may also be downloaded from the hp Web site using the following procedure: 214-DIMM Configuration Warning Populated DIMM configura- Rearrange the DIMMs so that tion is not optimized each channel has the same amount of memory. 301-, 304-Keyboard error Keyboard failure. Check keyboard connection or keys. Check connector for bent of missing pins. Replace keyboard. If 304, possible system board problem. 501-Display Adapter Failure Graphics display controller. 1. Reseat graphics card. 2. Clear CMOS. 3. Check monitor connection. 1. Go to www.hp.com 4. Replace graphics card. 2. Click the Software & Download driver link. 3. Enter the product number (for example, dc7800) in the text box and press the Enter key. 1720-SMART Hard Drive Detects Imminent Failure Hard drive is about to fail. 4. Select the specific product. 5. Select the OS. 6. Click the Diagnostics link. 7. Select HP Insight Diagnostics Offline Edition. 1. Determine if hard drive is giving correct error message. Enter Computer Setup and run the Drive Protection System test under Storage > DPS Selftest. 2. Apply hard drive firmware patch if applicable. 8. Select the proper language and click Download. 3. Back up contents and replace hard drive. NOTE: The download includes instructions on how to create a bootable CD. Clearing CMOS 1. Turn off the computer and any external devices, and disconnect the power cord from the power outlet. dc7800 Illustrated Parts & Service Map, SFF Chassis 2. Check DIMMs for proper seating, type, and HP compatibility. 4. Replace system board. Diagnostic functions are provided by the Setup Utility (in system ROM) and by Insight Diagnostics. Insight Diagnostics provides detailed system information including: 4. Replace the chassis access panel and reconnect the power cord. 1. Run Setup (F10). 3. Remove DIMMs singularly and reboot to isolate faulty DIMM. Diagnostic Functions 3. On the system board, press and hold the CMOS button for 5 seconds. 1. Clear CMOS memory. 3. Replace system board. Security Features 2. Remove the chassis access panel. 4. Replace system board 2. Remove expansion boards. 4. Press Enter. • • • • • 2. Remove suspected card, reboot 1796-SATA Cabling Error One or more SATA devices are improperly attached. For optimal performance, the SATA 0 and SATA 1 connectors must be used before SATA 2 and SATA 3. Ensure SATA connectors are used in ascending order. For one device, use SATA 0. For two devices, use SATA 0 and SATA 1. For three devices, use SATA 0, SATA1, and SATA 2. 1801-Microcode Patch Error 1. Upgrade BIOS to proper version. Processor not supported by ROM BIOS. 2. Change the processor. 459786-001 page 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 4 Page Mode : UseNone XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:7663c5b1-b976-4d44-88b9-3a5aac4dfb9f Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : FrameMaker 7.0 Modify Date : 2008:09:09 17:30:42-05:00 Create Date : 2003:01:30 15:31:54Z Metadata Date : 2008:09:09 17:30:42-05:00 Document ID : uuid:07a24303-c560-41f9-ae2e-2192dbfb7bc1 Format : application/pdf Title : dc7800 SFF IPSM Creator : HP Author : HPEXIF Metadata provided by EXIF.tools