HP Visualize B1000, C3000, C3600 Workstations Service Handbook (a4985 90048) Lpv37943

• Service Handbook
  • Service Handbook
    • Service Handbook
    • HP Visualize B Class and C Class UNIX® Workstations
    • Manufacturing Part Number: HP Part No. A4985-90048
    • Printed in USA January 2000
    • Edition E0100
  • Notice
    • Notice
    • The information contained in this document is subject to change without notice. Hewlett-Packard a...
  • Hewlett-Packard Warranty Statement
    • Hewlett-Packard Warranty Statement
    • HP PRODUCT DURATION OF WARRANTY HP Visualize Wo...
    • Model B Class and C Class
    • 1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship...
      • 1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship...
        • 1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship...
      • 2. HP warrants that HP software will not fail to execute its programming instructions, for the pe...
        • 2. HP warrants that HP software will not fail to execute its programming instructions, for the pe...
      • 3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If ...
        • 3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If ...
      • 4. HP products may contain remanufactured parts equivalent to new in performance or may have been...
        • 4. HP products may contain remanufactured parts equivalent to new in performance or may have been...
      • 5. The warranty period begins on the date of delivery or on the date of installation if installed...
        • 5. The warranty period begins on the date of delivery or on the date of installation if installed...
      • 6. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or ca...
        • 6. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or ca...
      • 7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY O...
        • 7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY O...
      • 8. HP will be liable for damage to tangible property per incident up to the greater of $300,000 o...
        • 8. HP will be liable for damage to tangible property per incident up to the greater of $300,000 o...
      • 9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER’S SOL...
        • 9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER’S SOL...
  • Restricted Rights Legend
    • Restricted Rights Legend
    • Use, duplication, or disclosure by the U.S. Government Department of Defense is subject to restri...
    • © Copyright 1999 Hewlett-Packard Company. All Rights Reserved.
    • This document contains proprietary information that is protected by copyright. All rights are res...
    • UNIX is a registered trademark in the United States and other countries, licensed exclusively thr...
    • © Copyright 1980, 1984 AT&T, Inc.
    • © Copyright 1979, 1980, 1983 The Regents of the University of California.
    • This software and documentation is based in part on the Fourth Berkeley Software Distribution und...
  • Printing History
    • Printing History
    • New editions of this manual incorporate all material updated since the previous edition. Update p...
    • The manual part number and printing date indicate its current edition. The manual part number cha...
    • HP Part Number Printing Date Edition
    • A4985-90039 May 1999  First A4985-90048 ...
• 1 Product Information
  • 1 Product Information
  • This chapter introduces the HP Visualize B Class and C Class workstations, including their contro...
    • This chapter introduces the HP Visualize B Class and C Class workstations, including their contro...
  • Included in this chapter are the following topics:
  • • Product description
    • • Product description
      • • Product description
        • • Product description
      • • System unit front panel controls
        • • System unit front panel controls
      • • System unit rear panel connectors
        • • System unit rear panel connectors
      • • Monitor information
        • • Monitor information
      • • Keyboard and Mouse information
        • • Keyboard and Mouse information
      • • Operating System Overview
        • • Operating System Overview
  • B1000/C3000:product description,
    • B1000/C3000:product description,
      • B1000/C3000:product description,
    • The HP Visualize B Class and C Class workstations contain the following key features:
      • The HP Visualize B Class and C Class workstations contain the following key features:
    • • Processor:
      • • Processor:
        • • Processor:
        • — One 300MHz PA8500 microprocessor in the B1000 workstation
        • — One 400MHz PA8500 microprocessor in the C3000 workstation
        • — One 550MHz PA8600 microprocessor in the C3600 workstation
        • — The PA8500 processor has a 0.5MByte instruction cache and a 1.0MByte data cache
      • • Operating System:
        • • Operating System:
        • Workstations B Class and C Class require HP-UX 10.20 and Workstation ACE (Additional Core Enhance...
      • • User Interface:
        • • User Interface:
        • HP CDE graphical user interface
      • • Compatibility: Source and binary code compatible with the Series 700 product family
        • • Compatibility: Source and binary code compatible with the Series 700 product family
      • • Monitors:
        • • Monitors:
        • — 21-inch 1280¥1024 (stereo capability) and 1600¥1200 color, 75Hz
      • • Optional Graphics:
        • • Optional Graphics:
        • HP Visualize-EG and Visualize fx2 Pro (for B1000)
        • HP Visualize-EG, Visualize fx2 Pro and Visualize fx4 Pro (for C3000)
        • HP Visualize-EG, Visualize fxe (for C3600)
      • • Main Memory:
        • • Main Memory:
        • — 128MByte and 256MByte DIMMs for B Class and C Class workstations
        • — Eight memory slots available per each B Class and C Class workstations  
        • — Minimum of 128MBytes and a maximum of 2GBytes of memory (B Class and C Class)
      • • Internal Storage Devices:
        • • Internal Storage Devices:
        • – Wide Ultra2 Low-Voltage Differential SCSI – up to two:
        • 9.0 GB Hard Disk Drive
        • 18.0 GB Hard Disk Drive
        • – Removable Media (one of each maximum)
        • CD-ROM Drive
        • Floppy Disk Drive
      • • Standard Network:
        • • Standard Network:
        • – RJ45, Twisted Pair 10 BaseT/100 BaseT
      • • Standard I/O Ports:
        • • Standard I/O Ports:
        • — Ultra2 Wide Low-Voltage Differential (LVD) SCSI, one
        • — Ultra Narrow Single-Ended (NSE) SCSI, one
        • — Parallel port (IEEE 1284), one
        • — Universal Serial Bus (USB) ports, two
        • — Serial Interface ports (RS-232C), two
        • — Audio ports (Line-in, Line-out, headset, and microphone-in)
      • • Optional I/O:
        • • Optional I/O:
        • Six PCI slots are available for the B Class and C Class workstations.
        • – 1 PCI 4X:64 bit, 66 MHz, primary graphics (full size, 3.3V)
        • – 2 PCI 1X:32 bit, 33 MHz, (half size, 5V)
        • – 3 PCI 2X:64 bit, 33 MHz, (full size, 5V)
      • • Keyboard:
        • • Keyboard:
        • – Universal Serial Bus (USB) keyboard, one
      • • Mouse:
        • • Mouse:
        • – Universal Serial Bus (USB) mouse, one
  • System Unit Front Panel Controls
    • System Unit Front Panel Controls
    • Figure 1-1 shows the location of the system unit front panel controls.
      • Figure 1-1 shows the location of the system unit front panel controls.
    • Figure11. System Unit Front Panel Controls
      • Figure11. System Unit Front Panel Controls
      • <GRAPHIC>
    • LCD:location,
      • LCD:location,
        • LCD:location,
      • The Liquid Crystal Display (LCD) is located on the left side of the front panel. The LCD displays...
      • LCD:symbols,
        • LCD:symbols,
          • LCD:symbols,
        • <GRAPHIC>
    • Power switch:soft power down procedure,
      • Power switch:soft power down procedure,
        • Power switch:soft power down procedure,
      • Use the Power switch to power the system unit on and off. When you use the soft power down proced...
    • Storage Device:controls and features,
      • Storage Device:controls and features,
        • Storage Device:controls and features,
      • This workstation allows either or both of the following internal storage devices: CD drive or flo...
      • NOTE You cannot have two internal storage devices of the same type. For example, you cannot have ...
        • NOTE You cannot have two internal storage devices of the same type. For example, you cannot have ...
      • Figure 13.
        • Figure 13.
      • Storage device:CD drive,
        • Storage device:CD drive,
          • Storage device:CD drive,
        • <GRAPHIC>
      • <TABLE>
        • Table11. CD Drive Controls
        • <TABLE HEADING>
          • <TABLE ROW>
            • Control/Feature
              • Control/Feature
            • Purpose
              • Purpose
        • <TABLE BODY>
          • <TABLE ROW>
            • Eject Button
            • Press to open the Disc Tray and insert or remove a disc. When the drive is in use, press the ejec...
          • <TABLE ROW>
            • Emergency Eject
              • Emergency Eject
            • If the workstation does no have power, you can insert the end of a paper clip into this small hol...
              • If the workstation does no have power, you can insert the end of a paper clip into this small hol...
          • <TABLE ROW>
            • Disk Tray
              • Disk Tray
            • The Disk Tray holds the CD. This style of CD drive does not use a disk caddy.
              • The Disk Tray holds the CD. This style of CD drive does not use a disk caddy.
          • <TABLE ROW>
            • Busy Indicator
              • Busy Indicator
            • Lights during a data access operation and blinks during a data transfer. The indicator blinks ini...
              • Lights during a data access operation and blinks during a data transfer. The indicator blinks ini...
              • • A defective disc
                • • A defective disc
                  • • A defective disc
                • • A disc insertion error (for example, an upside down disc)
                  • • A disc insertion error (for example, an upside down disc)
                • • No disc present
                  • • No disc present
      • NOTE The audio features of the CD drive are supported through applications only. One such applica...
        • NOTE The audio features of the CD drive are supported through applications only. One such applica...
      • The optional
      • Figure 14.
        • Figure 14.
      • Figure14. Floppy Drive Controls and Features
        • Figure14. Floppy Drive Controls and Features
        • <GRAPHIC>
      • <TABLE>
        • Table12. Floppy Drive Controls and Features
        • <TABLE HEADING>
          • <TABLE ROW>
            • Control/Feature
            • Purpose
              • Purpose
        • <TABLE BODY>
          • <TABLE ROW>
            • Floppy Drive Eject Button
              • Floppy Drive Eject Button
            • Push the eject button to remove floppy diskettes from the drive.
              • Push the eject button to remove floppy diskettes from the drive.
          • <TABLE ROW>
            • Floppy Drive Activity LED
              • Floppy Drive Activity LED
            • The floppy drive LED flashes to indicate the drive is in use.
              • The floppy drive LED flashes to indicate the drive is in use.
    • Security Lock
      • Security Lock
      • Access to the mass storage devices is controlled by a security lock on the front panel. Locking t...
      • To prevent access to internal components requires the use of the security loop on the rear panel ...
  • Rear Panel Connectors:
    • Rear Panel Connectors:
      • Rear Panel Connectors:
    • This section describes the following connectors on the system unit’s rear panel:
      • This section describes the following connectors on the system unit’s rear panel:
      • • Two serial ports (RS-232)
        • • Two serial ports (RS-232)
          • • Two serial ports (RS-232)
            • • Two serial ports (RS-232)
          • • Two Universal Serial Bus ports (USB)
          • • LAN connector, 10 BaseT/100 BaseT
            • • LAN connector, 10 BaseT/100 BaseT
          • • HP parallel IEEE 1284 (printer) connector
          • • Audio connectors (PCI based, line in, line out, headset, and microphone in)
            • • Audio connectors (PCI based, line in, line out, headset, and microphone in)
          • • Ultra2 Wide LVD (Low Voltage Differential) SCSI
            • • Ultra2 Wide LVD (Low Voltage Differential) SCSI
          • • Ultra Narrow Single-Ended (NSE) SCSI
            • • Ultra Narrow Single-Ended (NSE) SCSI
          • • TOC (transfer of control) button
            • • TOC (transfer of control) button
          • • AC power cord connector
            • • AC power cord connector
          • • Security loop
            • • Security loop
        • NOTE To maintain FCC/EMI compliance, verify that all cables are fully seated and properly fastened.
          • NOTE To maintain FCC/EMI compliance, verify that all cables are fully seated and properly fastened.
    • Figure15. System Unit Rear Panel Connectors
      • Figure15. System Unit Rear Panel Connectors
      • <GRAPHIC>
    • Rear Panel Connectors:audio connectors,
      • Rear Panel Connectors:audio connectors,
        • Rear Panel Connectors:audio connectors,
      • The Model B Class and C Class workstations have audio-input and -output capabilities through exte...
      • The rear panel contains the Audio IN (Stereo line-in) and Microphone (Mic-in), and Audio OUT (Ste...
      • The audio connectors are standard stereo audio mini-jacks (see Figure 1-6).
      • NOTE Hewlett-Packard recommends using gold-plated plugs available through audio retailers for bes...
        • NOTE Hewlett-Packard recommends using gold-plated plugs available through audio retailers for bes...
      • Figure16. Audio Connectors
        • Figure16. Audio Connectors
        • <GRAPHIC>
      • Table 13.
        • Table 13.
      • <TABLE>
        • Table13. Audio Electrical Specifications
        • <TABLE BODY>
          • <TABLE ROW>
            • Frequency Response
              • Frequency Response
            • 25 to 20KHz
              • 25 to 20KHz
          • <TABLE ROW>
            • Input Sensitivity/Impedance
              • Input Sensitivity/Impedance
          • <TABLE ROW>
            • Line in
              • Line in
            • 2.0V pk/47kohm
              • 2.0V pk/47kohm
          • <TABLE ROW>
            • Microphone in
              • Microphone in
            • 22mVpk/1kohm
              • 22mVpk/1kohm
          • <TABLE ROW>
            • Max Output Level/Impedance
              • Max Output Level/Impedance
          • <TABLE ROW>
            • Line Out
              • Line Out
            • 2.8Vpp/47kohm
              • 2.8Vpp/47kohm
          • <TABLE ROW>
            • Headphone
              • Headphone
            • 2.75Vpp/50ohm
              • 2.75Vpp/50ohm
          • <TABLE ROW>
            • Speaker (internal)
              • Speaker (internal)
            • 5.88Vpp/48ohm
              • 5.88Vpp/48ohm
          • <TABLE ROW>
            • Output Impedance
              • Output Impedance
          • <TABLE ROW>
            • Line Out
              • Line Out
            • 619ohm
              • 619ohm
          • <TABLE ROW>
            • Headphone
              • Headphone
            • 118ohm
              • 118ohm
    • USB:,
      • USB:,
        • USB:,
      • The USB connectors located on the rear panel of the workstation provide an interface for the keyb...
        • The USB connectors located on the rear panel of the workstation provide an interface for the keyb...
        • For more information on the Universal Serial Bus, refer to the following URL:
      • CAUTION Usage of devices other than USB specification may result in unpredictable functionality a...
        • CAUTION Usage of devices other than USB specification may result in unpredictable functionality a...
      • NOTE The USB clip on the rear of the chassis provides strain relief for the USB cables.
        • NOTE The USB clip on the rear of the chassis provides strain relief for the USB cables.
    • Rear Panel Connectors:parallel,
      • Rear Panel Connectors:parallel,
        • Rear Panel Connectors:parallel,
      • The 25-pin HP Parallel I/O interface uses IEEE 1284 I/O interface protocols to support peripheral...
        • The 25-pin HP Parallel I/O interface uses IEEE 1284 I/O interface protocols to support peripheral...
    • Rear Panel Connectors:network,
      • Rear Panel Connectors:network,
        • Rear Panel Connectors:network,
      • The B Class and C Class workstations have a built-in Twisted Pair (TP) connector for the 802.3 (E...
    • Rear Panel Connectors:serial,
      • Rear Panel Connectors:serial,
        • Rear Panel Connectors:serial,
      • There are a variety of peripheral devices that can attach to the RS-232 Serial Input/Output (SIO)...
      • The SIO ports are programmable, allowing functions such as bit rate, character length, parity, an...
      • Table 14.
        • Table 14.
      • <TABLE>
        • Table14. Serial I/O Pins
        • <TABLE HEADING>
          • <TABLE ROW>
            • Pin No.
              • Pin No.
            • Signal
              • Signal
            • Description
              • Description
        • <TABLE BODY>
          • <TABLE ROW>
            • 1
              • 1
            • DCD
              • DCD
            • Data Carrier Detect
              • Data Carrier Detect
          • <TABLE ROW>
            • 2
              • 2
            • RXD
              • RXD
            • Receive Data
          • <TABLE ROW>
            • 3
              • 3
            • TXD
              • TXD
            • Transmit Data
          • <TABLE ROW>
            • 4
              • 4
            • DTR
              • DTR
            • Data Terminal Ready
          • <TABLE ROW>
            • 5
              • 5
            • GND
              • GND
            • Ground
              • Ground
          • <TABLE ROW>
            • 6
              • 6
            • DSR
              • DSR
            • Data Set Ready
              • Data Set Ready
          • <TABLE ROW>
            • 7
              • 7
            • RTS
              • RTS
            • Request To Send
              • Request To Send
          • <TABLE ROW>
            • 8
              • 8
            • CTS
              • CTS
            • Clear To Send
              • Clear To Send
          • <TABLE ROW>
            • 9
              • 9
            • RI
              • RI
            • Ring Indicator
              • Ring Indicator
    • SCSI:connectors,
      • SCSI:connectors,
        • SCSI:connectors,
      • The B Class and C Class workstations have built in SCSI connectors for Ultra2 Wide Low-Voltage Di...
      • NOTE There must ALWAYS be a terminator at both ends of a SCSI bus. This means one internal termin...
        • NOTE There must ALWAYS be a terminator at both ends of a SCSI bus. This means one internal termin...
    • Rear Panel Connectors:TOC,
      • Rear Panel Connectors:TOC,
        • Rear Panel Connectors:TOC,
      • The TOC (transfer of control) button interrupts the system and transfers control from the default...
    • Rear Panel Connectors:power cord
      • Rear Panel Connectors:power cord
        • Rear Panel Connectors:power cord
      • Plug the workstation’s power cord into the power cord connector to provide AC power to the system.
    • Rear Panel Connectors:security loop,
      • Rear Panel Connectors:security loop,
        • Rear Panel Connectors:security loop,
      • The security loop provides a means of locking the left side panel with a padlock or other locking...
      • 1. Inspect left side panel for proper seating in the mainframe chassis.
        • 1. Inspect left side panel for proper seating in the mainframe chassis.
        • 2. Push in the retractable pin on the spring loaded square fastener.
          • 2. Push in the retractable pin on the spring loaded square fastener.
        • 3. Insert the locking device through the top and bottom holes of the square fastener.
          • 3. Insert the locking device through the top and bottom holes of the square fastener.
        • 4. Inspect after locking device is in place to assure that the retractable pin is captured in the...
          • 4. Inspect after locking device is in place to assure that the retractable pin is captured in the...
      • The internal components of the workstation is now secured. See
      • NOTE A locking device is not supplied with the workstation; the customer must supply a lock to us...
        • NOTE A locking device is not supplied with the workstation; the customer must supply a lock to us...
      • Figure17. Security Loop Operation
        • Figure17. Security Loop Operation
        • <GRAPHIC>
  • Monitor:,
    • Monitor:,
      • Monitor:,
    • The B Class and C Class workstations support the following monitors:
      • The B Class and C Class workstations support the following monitors:
      • • 19-inch, 1600¥1200 color monitor (A4575A)
        • • 19-inch, 1600¥1200 color monitor (A4575A)
          • • 19-inch, 1600¥1200 color monitor (A4575A)
        • • 21-inch, 1600¥1200 color monitor (A4576A)
          • • 21-inch, 1600¥1200 color monitor (A4576A)
        • • 18.1-inch, L1800 Flat Panel Display color monitor (D5065W)
          • • 18.1-inch, L1800 Flat Panel Display color monitor (D5065W)
    • For information on the A4575A monitors, see:
    • • HP A4575A Color Monitor CE Handbook
      • • HP A4575A Color Monitor CE Handbook
        • • HP A4575A Color Monitor CE Handbook
    • The A4575A is a 19" high-range resolution, multi-mode color monitor for use on workstations and X...
    • For information on the A4576A monitor, see:
    • The A4576A is a 21" high-range resolution, multi-mode color monitor for use on workstations. The ...
    • NOTE Note that the word “multi-sync” is used as a common word to refer to “multi-frequency” and/o...
      • NOTE Note that the word “multi-sync” is used as a common word to refer to “multi-frequency” and/o...
    • NOTE The connection to earlier HP monitors with 15-pin mini-DSub cables can be made using the A41...
      • NOTE The connection to earlier HP monitors with 15-pin mini-DSub cables can be made using the A41...
  • USB:support,
    • USB:support,
      • USB:support,
    • USB Keyboard
      • USB Keyboard
      • The HP Visualize B Class and C Class workstations support USB keyboards. The keyboard shipped wit...
        • The HP Visualize B Class and C Class workstations support USB keyboards. The keyboard shipped wit...
        • The USB keyboard is designed specifically for use with HP workstations. All keyboard models with ...
        • Some applications may expect to use keycodes generated by keys existing on other types of keyboar...
      • NOTE HIL and PS/2 devices are not supported by the B Class and C Class workstations.
        • NOTE HIL and PS/2 devices are not supported by the B Class and C Class workstations.
    • USB HP Scroll Mouse
      • USB HP Scroll Mouse
      • The HP scroll mouse (USB) has a left and right button that function the same as most mice. Howeve...
        • The HP scroll mouse (USB) has a left and right button that function the same as most mice. Howeve...
      • For general information on the various cursor shapes associated with different areas of HP CDE wh...
    • HP Hub for USB Devices
      • HP Hub for USB Devices
      • The HP USB hub (part number D6804) provides the ability to connect more than one USB device to th...
        • The HP USB hub (part number D6804) provides the ability to connect more than one USB device to th...
  • Operating System:overview,
    • Operating System:overview,
      • Operating System:overview,
    • This workstation uses the HP-UX operating system, version 10.20 and the Workstation Additional Co...
    • If you’re running HP-UX 10.20, the result from this command will be:
    • Instant Ignition systems (systems with preloaded software) have X-Windows, Hewlett-Packard’s grap...
    • If the Instant Ignition system does not have the kernel preconfigured with all of the device driv...
    • For problems or questions with Instant Ignition, refer to
    • Note that both of the documents mentioned in the previous paragraphs can be found at the followin...
    • http://www.docs.hp.com/
      • http://www.docs.hp.com/
  • Memory:,
    • Memory:,
      • Memory:,
      • DIMM:memory,
    • The main memory for an HP Visualize B Class and C Class workstation can vary from a minimum of 12...
      • The main memory for an HP Visualize B Class and C Class workstation can vary from a minimum of 12...
    • To install DIMM cards in the B Class and C Class workstation reference
    • Memory:failures,
      • Memory:failures,
        • Memory:failures,
        • DIMM:memory failures,
      • The HP Visualize B Class and C Class system (with HP-UX 10.20 or HP-UX 11.0 ACE 9911) uses Memory...
      • You can use the command
      • The PDT can also be checked using the
• 2 Configuration
  • 2 Configuration
  • This chapter provides details about setting up and changing the system configuration for the HP V...
    • This chapter provides details about setting up and changing the system configuration for the HP V...
  • Chapter Overview
    • Chapter Overview
    • This chapter contains the following sections:
      • This chapter contains the following sections:
    • • Workstation Configurations
      • • Workstation Configurations
        • • Workstation Configurations
      • • Field Replaceable Unit (FRU) Configurations
        • • Field Replaceable Unit (FRU) Configurations
        • — Internal Storage Devices
        • — Memory
        • — I/O Cards
        • — Monitor-Type Selection
  • Configuration:workstation,
    • Configuration:workstation,
      • Configuration:workstation,
    • Refer to the HP Workstations Website for a complete list of supported accessories, peripherals, a...
    • http://hp.unixworkstations.com
      • http://hp.unixworkstations.com
  • Configuration:FRU,
    • Configuration:FRU,
      • Configuration:FRU,
    • This section provides information for setting up or changing the configuration of the system Fiel...
      • This section provides information for setting up or changing the configuration of the system Fiel...
    • Internal Storage Configurations
      • Internal Storage Configurations
      • Configuration:hard disk drive,
        • Configuration:hard disk drive,
          • Configuration:hard disk drive,
        • The SCSI IDs for hard disk drives are hard-wired into the SCA Ultra2 Wide LVD SCSI interfaces in ...
          • The SCSI IDs for hard disk drives are hard-wired into the SCA Ultra2 Wide LVD SCSI interfaces in ...
          • Similarly, no jumpers are installed at the factory, nor is any jumper installation required at th...
        • NOTE There must ALWAYS be a terminator at both ends of a SCSI bus. This means one internal termin...
          • NOTE There must ALWAYS be a terminator at both ends of a SCSI bus. This means one internal termin...
        • Table 2-1 lists the default device IDs for internal storage devices. These IDs are the default ID...
        • <TABLE>
          • Table21. Default Device IDs TABLE
          • <TABLE HEADING>
            • <TABLE ROW>
              • Ultra2 Wide Low-Voltage Differential SCSI
          • <TABLE BODY>
            • <TABLE ROW>
              • 1st Hard Disk Drive
              • ID6
            • <TABLE ROW>
              • 2nd Hard Disk Drive
              • ID5
            • <TABLE ROW>
              • DDS Drive, external optional device
              • ID3
            • <TABLE ROW>
              • ** Do not assign SCSI ID7 to any internal storage device.
        • Figures 2-1 and 2-2 show the two types of hard disk drives supported for the B Class and C Class ...
        • Figure21. Hard Drive, 9Gbyte/18Gbyte Ultra2 Low Voltage Differential
          • Figure21. Hard Drive, 9Gbyte/18Gbyte Ultra2 Low Voltage Differential
          • <GRAPHIC>
        • The hard disk drive in Figure 2-2 is used exclusively for the HP Visualize B Class workstation.
        • Figure22. 9Gbyte, 7200 RPM, Hard Disk Drive
          • Figure22. 9Gbyte, 7200 RPM, Hard Disk Drive
          • <GRAPHIC>
      • Configuration:hard disk drive:SAM,
        • Configuration:hard disk drive:SAM,
          • Configuration:hard disk drive:SAM,
        • This section describes how to add a hard drive to your system as a file system using SAM. For mor...
        • 1. Log in as
          • 1. Log in as
            • 1. Log in as
          • 2. Move the mouse pointer to the Application Manager control for tools and click the left mouse b...
            • 2. Move the mouse pointer to the Application Manager control for tools and click the left mouse b...
            • <GRAPHIC>
          • 3. Click twice on the
            • 3. Click twice on the
            • <GRAPHIC>
          • 4. Click twice on the
            • 4. Click twice on the
            • <GRAPHIC>
          • 5. Double click on the
            • 5. Double click on the
            • <GRAPHIC>
          • 6. Double click on the
            • 6. Double click on the
            • <GRAPHIC>
            • The following screen message is displayed: Scanning the system’s hardware... The Disk and Fi...
          • 7. Click on
            • 7. Click on
          • 8. Enter the mount directory name in the Mount Directory field of the Add Disk window and click o...
            • 8. Enter the mount directory name in the Mount Directory field of the Add Disk window and click o...
    • Configuration:CD Drive,
      • Configuration:CD Drive,
        • Configuration:CD Drive,
      • The optional CD drive connects to the ATAPI (IDE) interface in the CD drive bay backplane within ...
      • However, as shown in
      • CAUTION CD-ROM drives are susceptible to mechanical and electrostatic shock. When handling the dr...
        • CAUTION CD-ROM drives are susceptible to mechanical and electrostatic shock. When handling the dr...
      • Figure23. CD Drive Jumper Setting (Rear View)
        • Figure23. CD Drive Jumper Setting (Rear View)
        • <GRAPHIC>
      • See the section titled
    • Configuration:floppy disk drive,
      • Configuration:floppy disk drive,
        • Configuration:floppy disk drive,
      • The optional 3.5-inch floppy disk drive requires no ID, switch, or jumper settings. See the secti...
        • The optional 3.5-inch floppy disk drive requires no ID, switch, or jumper settings. See the secti...
      • CAUTION Floppy disk drives are susceptible to mechanical and electrostatic shock. When handling t...
        • CAUTION Floppy disk drives are susceptible to mechanical and electrostatic shock. When handling t...
    • Configuration:memory,
      • Configuration:memory,
        • Configuration:memory,
      • This workstation has 8 memory slots, labeled 0 through 7. Memory can be configured from 128MB to ...
      • Figure24. Memory Connectors
        • Figure24. Memory Connectors
        • <GRAPHIC>
      • CAUTION The memory cards must be installed in the correct order, else the system will not boot pr...
        • CAUTION The memory cards must be installed in the correct order, else the system will not boot pr...
      • The B Class and C Class workstation supports the 128 MByte DIMMs or the 256 MByte DIMMs. If users...
      • NOTE Users who wish to achieve both maximum performance and maximum future capacity are advised t...
        • NOTE Users who wish to achieve both maximum performance and maximum future capacity are advised t...
      • See the section titled
      • Use the Boot Console Handler to verify that the workstation recognizes the installed memory. See
    • Configuration:I/O cards,
      • Configuration:I/O cards,
        • Configuration:I/O cards,
      • There are six I/O slots located on the rear panel of the B Class and C Class workstations. Slots ...
        • There are six I/O slots located on the rear panel of the B Class and C Class workstations. Slots ...
      • Figure25. PCI Card Slot Numbering and Capabilities
        • Figure25. PCI Card Slot Numbering and Capabilities
        • <GRAPHIC>
      • To maintain good graphics performance, you should always use slot 2 (SL2) as your primary graphic...
      • NOTE If you connect your monitor to a different graphics card slot, you will need to change the g...
        • NOTE If you connect your monitor to a different graphics card slot, you will need to change the g...
      • See the section titled
    • Monitor:
      • Monitor:
        • Monitor:
      • The B Class and C Class supports the following monitors:
        • The B Class and C Class supports the following monitors:
        • • 19-inch (18.3-inch viewable) VGA 1600¥1200 color monitor (Product Number A4575A)
          • • 19-inch (18.3-inch viewable) VGA 1600¥1200 color monitor (Product Number A4575A)
          • • 21-inch (19.9-inch viewable) VGA 1600¥1200 color monitor (Product Number A4576A)
          • • 18.1-inch L1800 color flat panel display VGA up to 1280¥1024 (Product Number D5065W)
          • • 19-inch (18-inch viewable) display VGA 1600x1200 (Product Number D8910W)
          • • 21-inch (19.8-inch viewable) display VGA 1800x1440 (Product Number D2847A)
          • • 24-inch (22.5-inch viewable) display VGA 1920x1200 (Product Number A1295A)
      • The
      • Note that connection to earlier HP monitors with 15-pin mini-DSub cables can be made using the A4...
      • Monitor:unsupported,
        • Monitor:unsupported,
          • Monitor:unsupported,
      • NOTE The B Class and C Class workstations support a maximum of four Visualize-EG graphics cards w...
        • NOTE The B Class and C Class workstations support a maximum of four Visualize-EG graphics cards w...
• 3 Troubleshooting
  • 3 Troubleshooting
  • This chapter provides information about isolating a failing component, known as a Field Replaceab...
    • This chapter provides information about isolating a failing component, known as a Field Replaceab...
  • To troubleshoot a HP Visualize B Class and C Class workstation, you must be familiar with the HP-...
  • As a super-user who is troubleshooting a HP-UX system, you should be able to shutdown and reboot ...
  • Note any error or status messages, then run the power-up boot ROM diagnostics, known as Self Test...
  • For a complete description of using
  • http://wojo.rose.hp.com/
    • http://wojo.rose.hp.com/
  • troubleshooting:
    • troubleshooting:
      • troubleshooting:
    • The following four figures contain troubleshooting flowcharts you can follow to isolate a failing...
      • The following four figures contain troubleshooting flowcharts you can follow to isolate a failing...
      • NOTE For the system to power up, the left side panel must be properly seated in the mainframe cha...
        • NOTE For the system to power up, the left side panel must be properly seated in the mainframe cha...
    • Figure31. Power On LCD, Troubleshooting Flow
      • Figure31. Power On LCD, Troubleshooting Flow
      • <GRAPHIC>
    • troubleshooting:console,
      • troubleshooting:console,
        • troubleshooting:console,
      • <GRAPHIC>
    • troubleshooting:bootable device,
      • troubleshooting:bootable device,
        • troubleshooting:bootable device,
      • <GRAPHIC>
    • troubleshooting:HP-UX Boot,
      • troubleshooting:HP-UX Boot,
        • troubleshooting:HP-UX Boot,
      • <GRAPHIC>
  • troubleshooting:LCD,
    • troubleshooting:LCD,
      • troubleshooting:LCD,
    • This workstation uses an LCD panel to display firmware/OS progress codes. the codes, referred to ...
      • This workstation uses an LCD panel to display firmware/OS progress codes. the codes, referred to ...
    • FLT A hardware error has been detected
      • FLT A hardware error has been detected
    • TST Hardware being tested
      • TST Hardware being tested
    • SHU System being shutdown
      • SHU System being shutdown
    • INI Hardware being initialized
      • INI Hardware being initialized
    • WRN A non-optimal operating condition exists
      • WRN A non-optimal operating condition exists
    • RUN Computer is running operating system
      • RUN Computer is running operating system
    • In general, the LCD display has the following format:
    • <GRAPHIC>
      • <GRAPHIC>
    • ZZZ  Three character chassis code
      • ZZZ  Three character chassis code
    • YYYY   Four digit hexadecimal code
      • YYYY   Four digit hexadecimal code
    • FFFFFF   Six character field replaceable unit description
      • FFFFFF   Six character field replaceable unit description
    • WWWWWWWWWWWWWWWW Description of the chassis code
      • WWWWWWWWWWWWWWWW Description of the chassis code
    • If the system encounters an
    • FLT
      • FLT
    • 30FC
      • 30FC
    • SYS BD
      • SYS BD
    • bad sys bd id
      • bad sys bd id
  • troubleshooting:fan failures and warnings,
    • troubleshooting:fan failures and warnings,
      • troubleshooting:fan failures and warnings,
    • This section provides the failure and warning messages you will see in the LCD if there is a prob...
      • This section provides the failure and warning messages you will see in the LCD if there is a prob...
      • A chassis code which indicates that a fan has failed (
    • <TABLE>
      • Table31. Fan Numbers and Corresponding Name
      • <TABLE HEADING>
        • <TABLE ROW>
          • Fan Number
            • Fan Number
          • Name of the Fan
            • Name of the Fan
      • <TABLE BODY>
        • <TABLE ROW>
          • 1
            • 1
          • (not used)
            • (not used)
        • <TABLE ROW>
          • 2
            • 2
          • Lower System Fan
            • Lower System Fan
        • <TABLE ROW>
          • 3
            • 3
          • Upper System Fan
            • Upper System Fan
        • <TABLE ROW>
          • 4
            • 4
          • PCI Card Fan
            • PCI Card Fan
        • <TABLE ROW>
          • 5
            • 5
          • Turbo Cooler Fan, CPU
            • Turbo Cooler Fan, CPU
        • <TABLE ROW>
          • 6
            • 6
          • Disk/Memory Fan
            • Disk/Memory Fan
    • Here is an example of a failure message for the I/O (PCI card) fan:
    • <TABLE>
      • <TABLE BODY>
        • <TABLE ROW>
          • WRN D014 SYS BD
            • WRN D014 SYS BD
              • WRN D014 SYS BD
        • <TABLE ROW>
          • fan 4: failure!
            • fan 4: failure!
              • fan 4: failure!
    • Here is an example of a warning message for the Turbo Cooler Fan, CPU:
    • To locate the correct fan, see
    • Figure35. Fan Locations
      • Figure35. Fan Locations
      • <GRAPHIC>
    • In the case of a fan problem, you will need to replace:
    • • The fan itself, if it is either a system board cooling fan, PCI (I/O) fan, or a memory fan.
      • • The fan itself, if it is either a system board cooling fan, PCI (I/O) fan, or a memory fan.
        • • The fan itself, if it is either a system board cooling fan, PCI (I/O) fan, or a memory fan.
      • • The entire system board tray assembly, if it is a turbo cooler fan (that is, a fan mounted on a...
        • • The entire system board tray assembly, if it is a turbo cooler fan (that is, a fan mounted on a...
    • See
  • troubleshooting:boot failure,
    • troubleshooting:boot failure,
      • troubleshooting:boot failure,
    • To start this workstation from an operating system stored on a device different from the usual bo...
      • To start this workstation from an operating system stored on a device different from the usual bo...
    • troubleshooting:bootable media,
      • troubleshooting:bootable media,
        • troubleshooting:bootable media,
      • To list all devices that may contain bootable media, go to the Main Menu of the Boot Console Inte...
        • To list all devices that may contain bootable media, go to the Main Menu of the Boot Console Inte...
        • Main Menu: Enter a command or a menu > search ipl
          • Main Menu: Enter a command or a menu > search ipl
        • The search may turn up more devices than there are lines on the display. If using a text terminal...
        • • To hold the display temporarily, press
          • • To hold the display temporarily, press
            • • To hold the display temporarily, press
          • • To continue the display, press 
            • • To continue the display, press 
          • • To halt the search, press 
            • • To halt the search, press 
        • These flow-control commands do not work with a bitmapped display, but such a display can show mor...
        • To search for devices of just one type that actually contain bootable media, go to the Main Menu ...
        • Main Menu: Enter a command > search ipl device_type
          • Main Menu: Enter a command > search ipl device_type
        • where
        • • fwscsi
          • • fwscsi
            • • fwscsi
              • • fwscsi
          • • scsi
            • • scsi
              • • scsi
          • • lan
            • • lan
              • • lan
          • • ide
            • • ide
              • • ide
          • • pcin
            • • pcin
              • • pcin
    • Stable Storage
      • Stable Storage
      • Stable Storage is non-volatile memory associated with each PA-RISC processor module. Stable stora...
        • Stable Storage is non-volatile memory associated with each PA-RISC processor module. Stable stora...
    • boot command:notations,
      • boot command:notations,
        • boot command:notations,
      • The
        • The
      • • Mnemonic
        • • Mnemonic
          • • Mnemonic
        • • Path number
          • • Path number
      • Type
      • Here are examples of mnemonic notation:
      • • boot
        • • boot
          • • boot
            • • boot
        • • boot
          • • boot
            • • boot
      • Here is an example of path number notation:
      • • boot p1
        • • boot p1
          • • boot p1
            • • boot p1
    • Supported Boot Paths
      • Supported Boot Paths
      • SCSI devices are bootable when connected to the SCSI port on the system. Diskless workstations ca...
        • SCSI devices are bootable when connected to the SCSI port on the system. Diskless workstations ca...
    • ISL:environment,
      • ISL:environment,
        • ISL:environment,
      • The ISL environment provides the means to load the operating system (HP-UX) environment. The ISL ...
        • The ISL environment provides the means to load the operating system (HP-UX) environment. The ISL ...
        • The ISL program is the first program loaded into main memory from an external media (LAN, disk, o...
        • The ISL environment provides the following capabilities:
      • • Execute user-entered commands to modify boot device paths and boot options in stable storage.
        • • Execute user-entered commands to modify boot device paths and boot options in stable storage.
          • • Execute user-entered commands to modify boot device paths and boot options in stable storage.
        • • Run off-line diagnostic programs and utilities.
          • • Run off-line diagnostic programs and utilities.
        • • Provide automatic booting of the HP-UX operating system after power-on or reset.
          • • Provide automatic booting of the HP-UX operating system after power-on or reset.
      • The ISL program provides a stand-alone environment for loading off-line diagnostic and utility pr...
  • troubleshooting:selftest failures,
    • troubleshooting:selftest failures,
      • troubleshooting:selftest failures,
    • Chassis codes are the key to debugging selftest errors. If a failure is found during selftest, ch...
      • Chassis codes are the key to debugging selftest errors. If a failure is found during selftest, ch...
      • 1. Using
        • 1. Using
          • 1. Using
        • 2. To get additional information about failures from the Boot Console Handler, use the Service Me...
          • 2. To get additional information about failures from the Boot Console Handler, use the Service Me...
      • In the following table, the FRU column shows messages printed on the LCD that refer to system FRU...
    • troubleshooting:chassis codes,
      • troubleshooting:chassis codes,
        • troubleshooting:chassis codes,
      • Table 32.
        • Table 32.
          • Table 32.
      • <TABLE>
        • Table32. Chassis Codes for B Class and C Class Workstations
        • <TABLE HEADING>
          • <TABLE ROW>
            • Ostat
              • Ostat
            • Code
              • Code
            • FRU
              • FRU
            • Message
              • Message
            • Description
              • Description
        • <TABLE BODY>
          • <TABLE ROW>
            • FLT
            • 1n01
              • 1
            • SYS BD
              • SYS BD
            • HPMC occurred
              • HPMC occurred
            • CPU n detected an unexpected HPMC.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n02
            • SYS BD
              • SYS BD
            • powerfail intrpt
              • powerfail intrpt
            • CPU n detected an unexpected power fail interrupt.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n03
            • SYS BD
              • SYS BD
            • recvry cntr trap
              • recvry cntr trap
            • CPU n detected an unexpected recovery counter trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n04
            • SYS BD
              • SYS BD
            • external intrrpt
              • external intrrpt
            • CPU n detected an unexpected external interrupt.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n05
            • SYS BD
              • SYS BD
            • LPMC occurred
              • LPMC occurred
            • CPU n detected an unexpected LPMC.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n06
            • SYS BD
              • SYS BD
            • ITLB mis/Ipg flt
              • ITLB mis/Ipg flt
            • CPU n detected an unexpected ITLB miss or instruction page fault.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n07
            • SYS BD
              • SYS BD
            • I mem prot trap
              • I mem prot trap
            • CPU n detected an unexpected instruction memory protection trap.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1n08
              • 1
            • SYS BD
              • SYS BD
            • illegal inst trp
              • illegal inst trp
            • CPU n detected an unexpected illegal instruction trap.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1n09
              • 1
            • SYS BD
              • SYS BD
            • break instr trap
              • break instr trap
            • CPU n detected an unexpected break instruction trap.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1n0A
              • 1
            • SYS BD
              • SYS BD
            • privilgd op trap
              • privilgd op trap
            • CPU n detected an unexpected privileged operation trap.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1n0B
              • 1
            • SYS BD
              • SYS BD
            • privlgd reg trap
              • privlgd reg trap
            • CPU n detected an unexpected privileged register trap.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1n0C
              • 1
            • SYS BD
              • SYS BD
            • overflow trap
              • overflow trap
            • CPU n detected an unexpected overflow trap.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1n0D
              • 1
            • SYS BD
              • SYS BD
            • conditional trap
              • conditional trap
            • CPU n detected an unexpected conditional trap.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1n0E
              • 1
            • SYS BD
              • SYS BD
            • assist exep trap
              • assist exep trap
            • CPU n detected an unexpected assist exception trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n0F
            • SYS BD
              • SYS BD
            • DTLB mis/Dpg flt
              • DTLB mis/Dpg flt
            • CPU n detected an unexpected DTLB miss or data page fault.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n10
            • SYS BD
              • SYS BD
            • non-acc ITLB mis
              • non-acc ITLB mis
            • CPU n detected an unexpected non-access ITLB miss fault.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n11
            • SYS BD
              • SYS BD
            • non-acc DTLB mis
              • non-acc DTLB mis
            • CPU n detected an unexpected non-access DTLB miss or data page fault.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n12
            • SYS BD
              • SYS BD
            • data mem prot tr
              • data mem prot tr
            • CPU n detected an unexpected data memory protection trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n13
            • SYS BD
              • SYS BD
            • data mem brk trp
              • data mem brk trp
            • CPU n detected an unexpected data memory break trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n14
            • SYS BD
              • SYS BD
            • TLB dirty bit tr
              • TLB dirty bit tr
            • CPU n detected an unexpected TLB dirty bit trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n15
            • SYS BD
              • SYS BD
            • page refrnce trp
              • page refrnce trp
            • CPU n detected an unexpected page reference trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n16
            • SYS BD
              • SYS BD
            • assist emul trap
              • assist emul trap
            • CPU n detected an unexpected assist emulation trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n17
            • SYS BD
              • SYS BD
            • hi-priv xfer trp
              • hi-priv xfer trp
            • CPU n detected an unexpected higher-privilege transfer trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n18
            • SYS BD
              • SYS BD
            • lo-priv xfer trp
              • lo-priv xfer trp
            • CPU n detected an unexpected lower-privilege transfer trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n19
            • SYS BD
              • SYS BD
            • taken branch trp
              • taken branch trp
            • CPU n detected an unexpected taken-branch trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n1A
            • SYS BD
              • SYS BD
            • data mem acc rts
              • data mem acc rts
            • CPU n detected an unexpected data memory access rights trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n1B
            • SYS BD
              • SYS BD
            • data mem prot ID
              • data mem prot ID
            • CPU n detected an unexpected data memory protection ID trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n1C
            • SYS BD
              • SYS BD
            • unalign data ref
              • unalign data ref
            • CPU n detected an unexpected unaligned data reference trap.
              • CPU
          • <TABLE ROW>
            • FLT
            • 1n1D
            • SYS BD
              • SYS BD
            • perf mon intrrpt
              • perf mon intrrpt
            • CPU n detected an unexpected performance monitor interrupt.
              • CPU
          • <TABLE ROW>
            • TST
            • 1n20
              • 1
            • SYS BD
              • SYS BD
            • CPUn basic test
              • CPU
            • CPU n is starting its basic operations self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n21
              • 1
            • SYS BD
              • SYS BD
            • CPUn alu test
              • CPU
            • CPU n is starting its arithmetic and logical unit self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n22
              • 1
            • SYS BD
              • SYS BD
            • CPUn branch test
              • CPU
            • CPU n is starting its branch instruction self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 1n23
              • 1
            • SYS BD
              • SYS BD
            • CPUn arith cond
              • CPU
            • CPU n is starting its arthimetic condition self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n24
              • 1
            • SYS BD
              • SYS BD
            • CPUn bit opers
              • CPU
            • CPU n is starting its bit operation instruction self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 1n25
              • 1
            • SYS BD
              • SYS BD
            • CPUn cntrl regs
              • CPU
            • CPU n is starting its control register self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n26
              • 1
            • SYS BD
              • SYS BD
            • CPUn ext intrpt
              • CPU
            • CPU n is starting its external interrupt self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 1n27
              • 1
            • SYS BD
              • SYS BD
            • CPUn itimer test
              • CPU
            • CPU n is starting its interval timer self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 1n28
              • 1
            • SYS BD
              • SYS BD
            • CPUn multi-media
              • CPU
            • CPU n is starting its multi-media instructions self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n29
              • 1
            • SYS BD
              • SYS BD
            • CPUn shadow reg
              • CPU
            • CPU n is starting its shadow register self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n2A
              • 1
            • SYS BD
              • SYS BD
            • CPUn diagnse reg
              • CPU
            • CPU n is starting its diagnose register self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n2B
              • 1
            • SYS BD
              • SYS BD
            • CPUn rdr test
              • CPU
            • CPU n is starting its remote diagnose register self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n2C
              • 1
            • SYS BD
              • SYS BD
            • CPUn bypass test
              • CPU
            • CPU n is starting its integer bypass operation self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 1n30
              • 1
            • SYS BD
              • SYS BD
            • CPUn start est
              • CPU
            • CPU n is starting its early (pre-memory) self-tests.
              • CPU
          • <TABLE ROW>
            • WRN
              • WRN
            • 1n31
            • SYS BD
              • SYS BD
            • CPUn skip est
            • CPU n is bypassing its early self-tests to save time.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1n32
            • SYS BD
              • SYS BD
            • CPUn bad tst mod
              • CPU
            • CPU n detected an unsupported system mode.
              • CPU
          • <TABLE ROW>
            • INI
              • INI
            • 1n3C
              • 1
            • SYS BD
              • SYS BD
            • CPUn initialize
              • CPU
            • CPU n is initializing after self-tests.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1n3E
            • SYS BD
              • SYS BD
            • CPUn exit est
            • CPU n finished its early self-tests.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1nA0
              • 1
            • SYS BD
              • SYS BD
            • CPUn fpu tests
              • CPU
            • CPU n is starting its floating-point unit self-tests.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1nA1
              • 1
            • SYS BD
              • SYS BD
            • CPUn fpu reg tst
              • CPU
            • CPU n is starting its floating-point register self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 1nA2
              • 1
            • SYS BD
              • SYS BD
            • CPUn fpu inst
              • CPU
            • CPU n is starting its floating-point instruction self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1nA3
              • 1
            • SYS BD
              • SYS BD
            • CPUn fpu traps
              • CPU
            • CPU n is starting its floating-point trap self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1nA4
              • 1
            • SYS BD
              • SYS BD
            • CPUn fpu misc
              • CPU
            • CPU n is starting its floating-point miscellaneous operations self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1nA5
              • 1
            • SYS BD
              • SYS BD
            • CPUn fpu bypass
              • CPU
            • CPU n is starting its floating-point bypassing self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1nB1
              • 1
            • SYS BD
              • SYS BD
            • CPUn TLB RAM tst
              • CPU
            • CPU n is starting its TLB register self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 1nB2
              • 1
            • SYS BD
              • SYS BD
            • CPUn TLB trans
              • CPU
            • CPU n is starting its TLB translation self-test.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1nBA
              • 1
            • SYS BD
              • SYS BD
            • monarch CPU fail
              • monarch CPU
            • The monarch CPU failed.
              • The monarch CPU failed.
          • <TABLE ROW>
            • FLT
              • FLT
            • 1nBB
              • 1
            • SYS BD
              • SYS BD
            • bad CPUn number
              • bad CPU
            • The CPU identifier was out of range.
              • The CPU identifier was out of range.
          • <TABLE ROW>
            • FLT
              • FLT
            • 1nBF
              • 1
            • SYS BD
              • SYS BD
            • CPUn halt boot
              • CPU
            • Bootstrap failure--machine halted.
              • Bootstrap failure--machine halted.
          • <TABLE ROW>
            • INI
              • INI
            • 1nCA
              • 1
            • SYS BD
              • SYS BD
            • CPUn sys bus arb
              • CPUn sys bus arb
            • Monarch CPU is initializing the system bus arbitration.
              • Monarch CPU is initializing the system bus arbitration.
          • <TABLE ROW>
            • WRN
              • WRN
            • 1nCD
              • 1
            • SYS BD
              • SYS BD
            • CPUn deconfig
              • CPU
            • CPU n deconfigured itself.
              • CPU
          • <TABLE ROW>
            • WRN
              • WRN
            • 1nCE
              • 1
            • SYS BD
              • SYS BD
            • CPUn extinguish
              • CPU
            • PDC_PROC halted CPU n.
              • PDC_PROC halted CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1nCF
              • 1
            • SYS BD
              • SYS BD
            • slaven failed
              • slave
            • Slave CPU n failed self-test.
              • Slave CPU
          • <TABLE ROW>
            • WRN
              • WRN
            • 1mDs
              • 1
            • SYS BD
              • SYS BD
            • slaves deconfig
              • slaves deconfig
            • Monarch CPU m deconfigured slave CPU s.
              • Monarch CPU
          • <TABLE ROW>
            • WRN
              • WRN
            • 1nEF
              • 1
            • SYS BD
              • SYS BD
            • CPUn slftst warn
              • CPU
            • CPU n detected a non-fatal error during its self-tests.
              • CPU
          • <TABLE ROW>
            • WRN
              • WRN
            • 1mFs
              • 1
            • SYS BD
              • SYS BD
            • monm stop slaves
              • mon
            • Monarch CPU m halted slave CPU s.
              • Monarch CPU
          • <TABLE ROW>
            • INI
              • INI
            • 1nFC
            • SYS BD
              • SYS BD
            • CPUn sync’ing
              • CPUn sync’ing
            • CPU n is synchronizing with the rest of the system.
              • CPU
          • <TABLE ROW>
            • INI
              • INI
            • 1nFD
            • SYS BD
              • SYS BD
            • CPUn stat wd tst
              • CPU
            • CPU n is testing the system status word.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 1nFF
            • SYS BD
              • SYS BD
            • monarchn selftst
              • monarch
            • Monarch CPU n failed self-test.
              • Monarch CPU
          • <TABLE ROW>
            • TST
              • TST
            • 2n20
            • SYS BD
              • SYS BD
            • CPUn icache RAM
              • CPU
            • CPU n is starting its instruction cache RAM self-test.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 2n25
              • 2
            • SYS BD
              • SYS BD
            • CPUn ic ld d err
              • CPU
            • CPU n detected a data error during data cache load.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 2n26
            • SYS BD
              • SYS BD
            • CPUn ic ld t err
              • CPU
            • CPU n detected a tag error during data cache load.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 2n30
            • SYS BD
              • SYS BD
            • CPUn icache tag
              • CPU
            • CPU n is starting its instruction cache tag self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 2n40
            • SYS BD
              • SYS BD
            • CPUn icache par
              • CPU
            • CPU n is starting its instruction cache parity detection self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 2n50
              • 2
            • SYS BD
              • SYS BD
            • CPUn dc stor que
              • CPU
            • CPU n is starting its data cache store queue self-test.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 2n51
            • SYS BD
              • SYS BD
            • CPUn dc st q err
              • CPU
            • CPU n detected an error during its data cache store queue self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 2n70
            • SYS BD
              • SYS BD
            • CPUn dcache RAM
              • CPU
            • CPU n is starting its data cache RAM self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 2n80
            • SYS BD
              • SYS BD
            • CPUn dcache tag
              • CPU
            • CPU n is starting its data cache tag self-test.
              • CPU
          • <TABLE ROW>
            • TST
              • TST
            • 2n90
            • SYS BD
            • CPUn dcache ECC
              • CPU
            • CPU n is starting its data cache ECC self-test.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 2BAD
            • SYS BD
              • SYS BD
            • assertion fail
              • assertion fail
            • A firmware assertion failed.
              • A firmware assertion failed.
          • <TABLE ROW>
            • TST
              • TST
            • 3n00
            • SYS BD
              • SYS BD
            • ROM checksum tst
              • ROM checksum tst
            • Monarch CPU n is testing the boot ROM integrity.
              • Monarch CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 3n00
            • SYS BD
              • SYS BD
            • ROM checksum BAD
              • ROM checksum BAD
            • The boot ROM failed checksum.
              • The boot ROM failed checksum.
          • <TABLE ROW>
            • INI
              • INI
            • 3n00
            • SYS BD
              • SYS BD
            • ROM checksum ok
              • ROM checksum ok
            • The boot ROM passed checksum.
              • The boot ROM passed checksum.
          • <TABLE ROW>
            • TST
              • TST
            • 3n01
            • SYS BD
              • SYS BD
            • PDH control test
              • PDH control test
            • Monarch CPU n is testing PDH control register.
              • Monarch CPU
          • <TABLE ROW>
            • INI
              • INI
            • 3n01
            • SYS BD
              • SYS BD
            • PDH control init
              • PDH control init
            • Monarch CPU n is initializing the PDH control register.
              • Monarch CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 3n01
            • SYS BD
              • SYS BD
            • PDH control err
              • PDH control err
            • Monarch CPU n detected an error in the PDH control register.
              • Monarch CPU
          • <TABLE ROW>
            • TST
              • TST
            • 3n02
            • SYS BD
              • SYS BD
            • scratch RAM test
              • scratch RAM test
            • Monarch CPU n is testing scratch RAM.
              • Monarch CPU
          • <TABLE ROW>
            • INI
              • INI
            • 3n02
            • SYS BD
              • SYS BD
            • scratch RAM ok
              • scratch RAM ok
            • The scratch RAM test failed.
          • <TABLE ROW>
            • FLT
              • FLT
            • 3n02
            • SYS BD
              • SYS BD
            • scratch RAM bad
              • scratch RAM bad
            • The scratch RAM test passed.
          • <TABLE ROW>
            • WRN
              • WRN
            • 3n03
            • SYS BD
              • SYS BD
            • stbl st read err
              • stbl st read err
            • CPU n detected a non-fatal error reading the stable store.
          • <TABLE ROW>
            • FLT
            • 3n03
            • SYS BD
              • SYS BD
            • stbl st read err
              • stbl st read err
            • CPU n detected a non-fatal error reading the stable store.
          • <TABLE ROW>
            • INI
            • 3nC4
            • SYS BD
              • SYS BD
            • clearing EEPROM
              • clearing EEPROM
            • Monarch CPU n is clearing the EEPROM.
              • Monarch CPU
          • <TABLE ROW>
            • INI
            • 3nD4
            • SYS BD
              • SYS BD
            • deflting EEPROM2
              • deflting EEPROM2
            • Monarch CPU n is initializing the EEPROM to system defaults.
              • Monarch CPU
          • <TABLE ROW>
            • WRN
            • 3n04
            • SYS BD
              • SYS BD
            • EEPROM write err
              • EEPROM write err
            • CPU n detected a non-fatal error writing the EEPROM.
          • <TABLE ROW>
            • FLT
              • FLT
            • 3n04
            • SYS BD
              • SYS BD
            • EEPROM write err
              • EEPROM write err
            • CPU n detected a fatal error writing the EEPROM.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 3n05
            • SYS BD
              • SYS BD
            • EEPROM wrt limit
              • EEPROM wrt limit
            • CPU n detected a fatal error writing the EEPROM.
              • CPU
          • <TABLE ROW>
            • WRN
              • WRN
            • 3n06
            • SYS BD
              • SYS BD
            • EEPROM read err
              • EEPROM read err
            • CPU n detected a non-fatal error reading the EEPROM.
              • CPU
          • <TABLE ROW>
            • FLT
            • 3n06
            • SYS BD
              • SYS BD
            • EEPROM read err
              • EEPROM read err
            • CPU n detected a fatal error reading the EEPROM.
              • CPU
          • <TABLE ROW>
            • INI
            • 3n07
            • SYS BD
              • SYS BD
            • CPUn invoke LDB
              • CPU
            • CPU n is starting the low-level debugger.
              • CPU
          • <TABLE ROW>
            • FLT
            • 3n09
            • SYS BD
              • SYS BD
            • bad sys mde byte
              • bad sys mde byte
            • CPU n detected an unsupported system mode.
              • CPU
          • <TABLE ROW>
            • WRN
            • 3n1A
            • SYS BD
              • SYS BD
            • hversion mismtch
              • hversion mismtch
            • Stable store hardware version doesn’t match system.
              • Stable store hardware version doesn’t match system.
          • <TABLE ROW>
            • TST
            • 3n1B
            • SYS BD
              • SYS BD
            • chck model strng
              • chck model strng
            • Check model string with version in stable store.
              • Check model string with version in stable store.
          • <TABLE ROW>
            • WRN
            • 3n1B
            • SYS BD
              • SYS BD
            • model str msmtch
              • model str msmtch
            • Model string doesn’t match that in stable store.
              • Model string doesn’t match that in stable store.
          • <TABLE ROW>
            • FLT
            • 3n1B
            • SYS BD
              • SYS BD
            • fatal model str
              • fatal model str
            • Error reading model string from stable store.
              • Error reading model string from stable store.
          • <TABLE ROW>
            • TST
            • 3n1C
            • SYS BD
              • SYS BD
            • test software ID
              • test software ID
            • Check LANIC address.
              • Check LANIC address.
          • <TABLE ROW>
            • WRN
            • 3n1C
            • SYS BD
              • SYS BD
            • update sw ID
              • update sw ID
            • Update LANIC address.
              • Update LANIC address.
          • <TABLE ROW>
            • FLT
            • 3n1C
            • SYS BD
              • SYS BD
            • update sw ID err
              • update sw ID err
            • Error updating LANIC address.
              • Error updating LANIC address.
          • <TABLE ROW>
            • INI
            • 3n2s
            • SYS BD
              • SYS BD
            • Invoke LDB: s
              • Invoke LDB:
            • CPU n is awaiting the low-level debugger for s more seconds.
              • CPU
          • <TABLE ROW>
            • TST
            • 3nBC
            • IO BD
            • test sys clocks
              • test sys clocks
            • CPU n is verifying processor clocks with the real-time clock.
              • CPU
          • <TABLE ROW>
            • INI
            • 3nBC
            • SYS BD
              • SYS BD
            • init sys clocks
              • init sys clocks
            • CPU n has initialized the processor clocks.
              • CPU
          • <TABLE ROW>
            • FLT
              • FLT
            • 3nBC
              • 3
            • IO BD
              • IO BD
            • RTC tick timeout
              • RTC tick timeout
            • The real-time clock is ticking too slowly or not at all.
              • The real-time clock is ticking too slowly or not at all.
          • <TABLE ROW>
            • TST
            • 3nCD
            • SYS BD
              • SYS BD
            • check defaults
              • check defaults
            • CPU n is initializing stable store values to system defaults.
              • CPU
          • <TABLE ROW>
            • INI
            • 3nCD
            • SYS BD
              • SYS BD
            • init defaults
              • init defaults
            • CPU n finished initializing stable store values.
              • CPU
          • <TABLE ROW>
            • FLT
            • 3nCD
            • SYS BD
              • SYS BD
            • init EEPROM err
              • init EEPROM err
            • CPU n detected an error writing to stable store.
              • CPU
          • <TABLE ROW>
            • FLT
            • 3nEC
            • SYS BD
              • SYS BD
            • bad sys config
              • bad sys config
            • CPU n detected an illegal CPU board configuration.
              • CPU
          • <TABLE ROW>
            • FLT
            • 3nF4
            • SYS BD
              • SYS BD
            • EEPROM boot limt
              • EEPROM boot limt
            • CPU n detected a fatal error writing the EEPROM.
              • CPU
          • <TABLE ROW>
            • FLT
            • 3nFC
            • SYS BD
              • SYS BD
            • bad sys bd id
              • bad sys bd id
            • CPU n cannot identify CPU board.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n00
            • SYS BD
              • SYS BD
            • CPUn start lst
              • CPU
            • CPU n is starting its late (with memory) self-tests.
              • CPU
          • <TABLE ROW>
            • WRN
            • 4n01
            • SYS BD
              • SYS BD
            • CPUn skip lst
              • CPU
            • CPU n is bypassing its late self-tests to save time.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n0E
            • SYS BD
              • SYS BD
            • CPUn exit lst
              • CPU
            • CPU n finished its late self-tests.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n20
            • SYS BD
              • SYS BD
            • CPUn lst erly st
              • CPU
            • CPU n is re-executing some of its early self-tests from system memory.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n21
            • SYS BD
              • SYS BD
            • CPUn lst basic
              • CPU
            • CPU n is re-executing its basic operations self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n22
            • SYS BD
              • SYS BD
            • CPUn lst alu
              • CPU
            • CPU n is re-executing its arithmetic and logic unit self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n23
            • SYS BD
              • SYS BD
            • CPUn lst branch
              • CPU
            • CPU n is re-executing its branch instruction self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n24
            • SYS BD
              • SYS BD
            • CPUn lst arth cd
              • CPU
            • CPU n is re-executing its arithmetic conditions self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n25
            • SYS BD
              • SYS BD
            • CPUn lst bit ops
              • CPU
            • CPU n is re-executing its bit operations self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n26
            • SYS BD
              • SYS BD
            • CPUn lst ctl reg
              • CPU
            • CPU n is re-executing its control register self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n27
            • SYS BD
              • SYS BD
            • CPUn lst ext int
              • CPU
            • CPU n is re-executing its external interrupt self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n28
            • SYS BD
              • SYS BD
            • CPUn lst itimer
              • CPU
            • CPU n is re-executing its interval timer self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n29
            • SYS BD
              • SYS BD
            • CPUn lst mltimed
              • CPU
            • CPU n is re-executing its multi-media instructions self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n2A
            • SYS BD
              • SYS BD
            • CPUn lst shadow
              • CPU
            • CPU n is re-executing its shadow register self-test.
              • CPU n is re-executing its shadow register self-test.
          • <TABLE ROW>
            • TST
            • 4n2B
            • SYS BD
              • SYS BD
            • CPUn lst dg regs
              • CPU
            • CPU n is re-executing its diagnose register self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n2C
            • SYS BD
              • SYS BD
            • CPUn lst rdrs
              • CPU
            • CPU n is re-executing its remote diagnose register self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n2D
            • SYS BD
              • SYS BD
            • CPUn lst bypass
              • CPU
            • CPU n is re-executing its integer bypass operation self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n30
            • SYS BD
              • SYS BD
            • CPUn cache byte
              • CPU
            • CPU n is starting its data cache sub-word operations self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n40
            • SYS BD
              • SYS BD
            • CPUn cache flush
              • CPU
            • CPU n is starting its cache flush self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n50
            • SYS BD
              • SYS BD
            • CPUn icache miss
              • CPU
            • CPU n is starting its instruction cache miss self-test.
              • CPU
          • <TABLE ROW>
            • TST
            • 4n60
            • SYS BD
              • SYS BD
            • CPUn dcache miss
              • CPU
            • CPU n is starting its data cache miss self-test.
              • CPU
          • <TABLE ROW>
            • FLT
            • 5n00
            • SYS BD
              • SYS BD
            • unknown bus err
              • unknown bus err
            • CPU n detected an unknown error on the system bus (Runway).
              • CPU
          • <TABLE ROW>
            • FLT
            • 5n02
            • SYS BD
              • SYS BD
            • path err assertd
              • path err assertd
            • CPU n detected a path error on the system bus (Runway).
              • CPU
          • <TABLE ROW>
            • FLT
            • 5n04
            • SYS BD
              • SYS BD
            • data parity err
              • data parity err
            • CPU n detected a data, address, or control parity error on the system bus (Runway).
              • CPU
          • <TABLE ROW>
            • FLT
            • 5n07
            • SYS BD
              • SYS BD
            • Runway dir error
              • Runway dir error
            • CPU n detected a directed error on the system bus (Runway).
              • CPU
          • <TABLE ROW>
            • FLT
            • 5n08
            • SYS BD
              • SYS BD
            • Runway broad err
              • Runway broad err
            • CPU n detected a broadcast error on the system bus (Runway).
              • CPU
          • <TABLE ROW>
            • FLT
            • 5n0A
            • SYS BD
              • SYS BD
            • illegal response
              • illegal response
            • CPU n received data that did not match any outstanding data request.
              • CPU
          • <TABLE ROW>
            • FLT
            • 5n0B
            • SYS BD
              • SYS BD
            • bus timeout
              • bus timeout
            • CPU n timed out before receiving requested data. The responder is logged in the system responder ...
              • CPU
          • <TABLE ROW>
            • FLT
            • 5n0C
            • SYS BD
              • SYS BD
            • CPU sync failure
              • CPU sync failure
            • CPU n’s synchronizer detected a rule violation on the system bus (Runway).
              • CPU
          • <TABLE ROW>
            • INI
            • 7000
            • DIMM
              • DIMM
            • start DIMM scan
              • start DIMM scan
            • Start looking for installed DIMMs.
              • Start looking for installed DIMMs.
          • <TABLE ROW>
            • INI
            • 7002
            • SYS BD
              • SYS BD
            • init mem tables
              • init mem tables
            • Initialize memory data structures.
              • Initialize memory data structures.
          • <TABLE ROW>
            • FLT
            • 7004
            • SYS BD
              • SYS BD
            • mem plt upd fail
              • mem plt upd fail
            • Error updating memory platform data.
              • Error updating memory platform data.
          • <TABLE ROW>
            • FLT
            • 7005
            • DIMM
              • DIMM
            • insufficient mem
              • insufficient mem
            • Insufficient memory detected to continue.
              • Insufficient memory detected to continue.
          • <TABLE ROW>
            • TST
            • 7010
            • DIMM
              • DIMM
            • check DIMM order
              • check DIMM order
            • Start memory DIMM order check.
              • Start memory DIMM order check.
          • <TABLE ROW>
            • WRN
            • 7011
            • DIMM
              • DIMM
            • skip DIMM ord ck
              • skip DIMM ord ck
            • Bypass memory DIMM order check.
              • Bypass memory DIMM order check.
          • <TABLE ROW>
            • FLT
            • 7012
            • DIMM
              • DIMM
            • DIMM order error
              • DIMM order error
            • Memory DIMMs are not in the proper order.
              • Memory DIMMs are not in the proper order.
          • <TABLE ROW>
            • FLT
            • 7013
            • DIMM
              • DIMM
            • DIMM order error
              • DIMM order error
            • Memory DIMMs are not in the proper order. As a result, the system cannot access one or more DIMMs...
              • Memory DIMMs are not in the proper order. As a result, the system cannot access one or more DIMMs...
          • <TABLE ROW>
            • TST
            • 7016
            • DIMM
              • DIMM
            • DIMM pair check
              • DIMM pair check
            • Start memory DIMM pair check (DIMMs in a pair (e.g. 0a/0b) must match in J7xxx).
              • Start memory DIMM pair check (DIMMs in a pair (e.g. 0a/0b) must match in J7xxx).
          • <TABLE ROW>
            • WRN
            • 7017
            • DIMM
              • DIMM
            • skip mem pair ck
              • skip mem pair ck
            • Bypass memory DIMM set check.
              • Bypass memory DIMM set check.
          • <TABLE ROW>
            • FLT
            • 701F
            • DIMM
              • DIMM
            • no memory found
              • no memory found
            • Memory scan couldn’t find any DIMMs.
              • Memory scan couldn’t find any DIMMs.
          • <TABLE ROW>
            • TST
            • 7020
            • SYS BD
              • SYS BD
            • search for IMM
              • search for IMM
            • Try to find a single memory bank to use for the initial memory module.
              • Try to find a single memory bank to use for the initial memory module.
          • <TABLE ROW>
            • TST
            • 703s
            • DIMM
              • DIMM
            • DIMM s IMM vrfy
              • DIMM
            • DIMM s was the initial memory module last boot. Verify it still works.
              • DIMM
          • <TABLE ROW>
            • FLT
            • 704s
            • DIMM
              • DIMM
            • DIMM s IMM fail
              • DIMM
            • DIMM s failed the initial memory module test.
              • DIMM
          • <TABLE ROW>
            • TST
            • 705s
            • DIMM
              • DIMM
            • DIMM s IMM test
              • DIMM
            • Test DIMM in slot s as the initial memory module.
              • Test DIMM in slot
          • <TABLE ROW>
            • INI
            • 706s
            • DIMM
              • DIMM
            • DIMM s is IMM
              • DIMM
            • DIMM s chosen as initial memory module.
              • DIMM
          • <TABLE ROW>
            • INI
            • 70F0
            • DIMM
            • DIMM scan done
              • DIMM scan done
            • Memory DIMM scan complete.
              • Memory DIMM scan complete.
          • <TABLE ROW>
            • TST
            • 7100
            • SYS BD
              • SYS BD
            • mem register tst
              • mem register tst
            • Start testing registers in memory controller.
              • Start testing registers in memory controller.
          • <TABLE ROW>
            • WRN
            • 7101
            • SYS BD
              • SYS BD
            • skip mem reg tst
              • skip mem reg tst
            • Bypass the memory controller register test.
              • Bypass the memory controller register test.
          • <TABLE ROW>
            • FLT
            • 7102
            • SYS BD
              • SYS BD
            • mem addr reg tst
              • mem addr reg tst
            • Firmware detected an error in the memory controller address registers.
              • Firmware detected an error in the memory controller address registers.
          • <TABLE ROW>
            • FLT
            • 7103
            • SYS BD
              • SYS BD
            • mem mbat reg tst
              • mem mbat reg tst
            • Firmware detected an error in the memory controller bank registers.
              • Firmware detected an error in the memory controller bank registers.
          • <TABLE ROW>
            • FLT
            • 7104
            • SYS BD
              • SYS BD
            • mem reg tst fail
              • mem reg tst fail
            • Firmware detected an error in the memory controller memory registers.
              • Firmware detected an error in the memory controller memory registers.
          • <TABLE ROW>
            • FLT
            • 7105
            • SYS BD
              • SYS BD
            • mem err reg test
              • mem err reg test
            • Firmware detected an error in the memory controller error registers.
              • Firmware detected an error in the memory controller error registers.
          • <TABLE ROW>
            • FLT
            • 7106
            • SYS BD
              • SYS BD
            • mem err clr fail
              • mem err clr fail
            • Firmware was unable to clear the error registers after testing.
              • Firmware was unable to clear the error registers after testing.
          • <TABLE ROW>
            • INI
            • 7200
            • DIMM
              • DIMM
            • strt DIMM detect
              • strt DIMM detect
            • Start the Serial Presence Detection (SPD) to search for memory DIMMs.
              • Start the Serial Presence Detection (SPD) to search for memory DIMMs.
          • <TABLE ROW>
            • INI
            • 7201
            • DIMM
              • DIMM
            • DIMM detect x%
              • DIMM detect
            • SPD is x% finished.
              • SPD is
          • <TABLE ROW>
            • WRN
            • 7202
            • SYS BD
              • SYS BD
            • skip DIMM detect
              • skip DIMM detect
            • Bypass Serial Presence Detection.
              • Bypass Serial Presence Detection.
          • <TABLE ROW>
            • FLT
            • 7203
            • DIMM
              • DIMM
            • unsupp DIMM type
              • unsupp DIMM type
            • SPD found an unsupported DIMM type.
              • SPD found an unsupported DIMM type.
          • <TABLE ROW>
            • FLT
            • 7204
            • DIMM
              • DIMM
            • SPD fatal error
              • SPD fatal error
            • SPD detected an unexpected, fatal error.
              • SPD detected an unexpected, fatal error.
          • <TABLE ROW>
            • INI
            • 7205
            • DIMM
              • DIMM
            • add HP DIMM type
              • add HP DIMM type
            • New HP manufactured DIMM type added to tables.
              • New HP manufactured DIMM type added to tables.
          • <TABLE ROW>
            • INI
            • 7206
            • DIMM
              • DIMM
            • non-HP DIMM type
              • non-HP DIMM type
            • New non-HP DIMM type added to tables (use at own risk).
              • New non-HP DIMM type added to tables (use at own risk).
          • <TABLE ROW>
            • FLT
            • 7207
            • DIMM
              • DIMM
            • DIMM table full
              • DIMM table full
            • The DIMM table is full--cannot add new type.
              • The DIMM table is full--cannot add new type.
          • <TABLE ROW>
            • FLT
            • 7208
            • DIMM
              • DIMM
            • no DIMMs found
              • no DIMMs found
            • SPD didn’t find any memory DIMMs.
              • SPD didn’t find any memory DIMMs.
          • <TABLE ROW>
            • INI
            • 721s
            • DIMM
              • DIMM
            • is DIMM s inst?
              • is DIMM
            • SPD is checking memory slot s.
              • SPD is checking memory slot
          • <TABLE ROW>
            • INI
            • 722s
            • DIMM
              • DIMM
            • ???? DIMM in s
              • ???? DIMM in s
            • SPD found a DIMM in slot s, but can’t determine its size. DIMM will not be used.
              • SPD found a DIMM in slot
          • <TABLE ROW>
            • INI
            • 723s
            • DIMM
              • DIMM
            • 128M DIMM in s
              • 128M DIMM in s
            • SPD found a 128MB DIMM in slot s.
              • SPD found a 128MB DIMM in slot
          • <TABLE ROW>
            • INI
            • 724s
            • DIMM
              • DIMM
            • 256M DIMM in s
              • 256M DIMM in s
            • SPD found a 256MB DIMM in slot s.
              • SPD found a 256MB DIMM in slot
          • <TABLE ROW>
            • INI
            • 725s
            • DIMM
              • DIMM
            • 512M DIMM in s
              • 512M DIMM in s
            • SPD found a 512MB DIMM in slot s.
              • SPD found a 512MB DIMM in slot
          • <TABLE ROW>
            • FLT
            • 72As
            • DIMM
              • DIMM
            • DIMM s checksum
              • DIMM s checksum
            • DIMM in slot s failed SPD checksum and will not be used.
              • DIMM in slot
          • <TABLE ROW>
            • FLT
            • 72Cs
            • DIMM
              • DIMM
            • DIMM s mismatch
              • DIMM s mismatch
            • DIMM in slot s didn’t match the other in pair. (J7xxx only--DIMMs must be in matched pairs.)
              • DIMM in slot
          • <TABLE ROW>
            • FLT
            • 72Ds
            • DIMM
              • DIMM
            • DIMM s load err
            • Memory DIMMs are not in the proper order. As a result, the system cannot access DIMM s and has de...
              • Memory DIMMs are not in the proper order. As a result, the system cannot access DIMM
          • <TABLE ROW>
            • INI
            • 7300
            • SYS BD
              • SYS BD
            • mem config start
              • mem config start
            • Starting main memory configuration.
              • Starting main memory configuration.
          • <TABLE ROW>
            • TST
              • TST
            • 7301
              • 7301
            • SYS BD
              • SYS BD
            • check mem config
              • check mem config
            • Checking for memory configuration change since last boot.
              • Checking for memory configuration change since last boot.
          • <TABLE ROW>
            • WRN
            • 7302
            • SYS BD
              • SYS BD
            • mem confg changd
              • mem confg changd
            • Memory physical configuration changed since last boot.
              • Memory physical configuration changed since last boot.
          • <TABLE ROW>
            • INI
              • INI
            • 7303
              • 7303
            • SYS BD
              • SYS BD
            • use confg change
              • use confg change
            • Memory physical configuration didn’t use saved configuration change. Use stored configuration data.
              • Memory physical configuration didn’t use saved configuration change. Use stored configuration data.
          • <TABLE ROW>
            • INI
              • INI
            • 7304
              • 7304
            • SYS BD
            • build mem intrlv
              • build mem intrlv
            • Building memory configuration with all DIMMs interleaved.
          • <TABLE ROW>
            • INI
              • INI
            • 7305
              • 7305
            • SYS BD
              • SYS BD
            • save mem config
              • save mem config
            • Saving memory configuration information in non-volatile memory.
              • Saving memory configuration information in non-volatile memory.
          • <TABLE ROW>
            • WRN
            • 7306
            • SYS BD
              • SYS BD
            • use alt mem conf
              • use alt mem conf
            • Memory will be configured from fixed values, instead of detected DIMMs.
              • Memory will be configured from fixed values, instead of detected DIMMs.
          • <TABLE ROW>
            • INI
            • 7307
            • SYS BD
              • SYS BD
            • interleve memory
            • Generating the memory interleave.
              • Generating the memory interleave.
          • <TABLE ROW>
            • FLT
            • 7308
            • SYS BD
              • SYS BD
            • PDT is disabled
              • PDT is disabled
            • Firmware detected bad memory pages, but the Page Deallocation Table is disabled.
              • Firmware detected bad memory pages, but the Page Deallocation Table is disabled.
          • <TABLE ROW>
            • FLT
              • FLT
            • 7309
            • DIMM
            • insufficient mem
            • Insufficient error-free memory to continue.
          • <TABLE ROW>
            • FLT
            • 730C
            • SYS BD
              • SYS BD
            • mem intrlv fail
              • mem intrlv fail
            • Memory interleave generation failed.
              • Memory interleave generation failed.
          • <TABLE ROW>
            • INI
            • 730F
            • SYS BD
              • SYS BD
            • mem config done
              • mem config done
            • Main memory configuration complete.
              • Main memory configuration complete.
          • <TABLE ROW>
            • TST
            • 7400
            • DIMM
              • DIMM
            • non-dest mem tst
              • non-dest mem tst
            • Starting non-destructive memory test.
              • Starting non-destructive memory test.
          • <TABLE ROW>
            • TST
            • 740F
            • DIMM
              • DIMM
            • non-dst tst done
              • non-dst tst done
            • Non-destructive memory test complete.
              • Non-destructive memory test complete.
          • <TABLE ROW>
            • INI
            • 7500
            • SYS BD
              • SYS BD
            • memory reset
              • memory reset
            • Resetting memory system.
              • Resetting memory system.
          • <TABLE ROW>
            • WRN
            • 7501
            • SYS BD
              • SYS BD
            • mem log clr warn
              • mem log clr warn
            • Memory error logs didn’t clear on first try.
              • Memory error logs didn’t clear on first try.
          • <TABLE ROW>
            • FLT
            • 7502
            • SYS BD
              • SYS BD
            • mem err log fail
              • mem err log fail
            • Firmware could not clear memory error logs.
              • Firmware could not clear memory error logs.
          • <TABLE ROW>
            • TST
            • 7600
            • DIMM
              • DIMM
            • dest mem test
              • dest mem test
            • Starting the destructive memory test.
              • Starting the destructive memory test.
          • <TABLE ROW>
            • WRN
            • 7601
            • DIMM
              • DIMM
            • mem init only
              • mem init only
            • Skip the test, just initialize memory to save time.
              • Skip the test, just initialize memory to save time.
          • <TABLE ROW>
            • TST
            • 7602
            • DIMM
              • DIMM
            • tst 1st mem page
              • tst 1st mem page
            • Starting 3-pass test of first memory page.
              • Starting 3-pass test of first memory page.
          • <TABLE ROW>
            • TST
            • 7603
            • DIMM
              • DIMM
            • tst rest of mem
              • tst rest of mem
            • Starting 3-pass test of the rest of memory.
              • Starting 3-pass test of the rest of memory.
          • <TABLE ROW>
            • TST
            • 7604
            • DIMM
              • DIMM
            • start 1st pass
              • start 1st pass
            • Starting 1st pass of memory test (write pseudorandom sequence).
              • Starting 1st pass of memory test (write pseudorandom sequence).
          • <TABLE ROW>
            • TST
            • 7605
            • DIMM
              • DIMM
            • 1st pass x%
              • 1st pass
            • First pass is x% complete.
              • First pass is
          • <TABLE ROW>
            • TST
            • 7606
            • DIMM
              • DIMM
            • start 2nd pass
              • start 2nd pass
            • Starting 2nd pass of memory test (verify pseudorandom sequence, write inverse).
              • Starting 2nd pass of memory test (verify pseudorandom sequence, write inverse).
          • <TABLE ROW>
            • TST
            • 7607
            • DIMM
              • DIMM
            • 2nd pass x%
              • 2nd pass
            • Second pass is x% complete.
              • Second pass is
          • <TABLE ROW>
            • TST
            • 7608
            • DIMM
              • DIMM
            • start 3rd pass
              • start 3rd pass
            • Starting 3rd pass of memory test (verify inverse sequence).
              • Starting 3rd pass of memory test (verify inverse sequence).
          • <TABLE ROW>
            • TST
            • 7609
            • DIMM
              • DIMM
            • 3rd pass x%
              • 3rd pass
            • Third pass is x% complete.
              • Third pass is
          • <TABLE ROW>
            • TST
            • 760A
            • DIMM
              • DIMM
            • start mem init
              • start mem init
            • Starting memory initialization. (Initialize to zero to set ECC.)
              • Starting memory initialization. (Initialize to zero to set ECC.)
          • <TABLE ROW>
            • TST
            • 760B
            • DIMM
              • DIMM
            • mem init x%
              • mem init
            • Memory initialization is x% complete.
              • Memory initialization is
          • <TABLE ROW>
            • WRN
            • 760C
            • DIMM
              • DIMM
            • repeat dest test
              • repeat dest test
            • Re-execute destructive test for hardware troubleshooting.
              • Re-execute destructive test for hardware troubleshooting.
          • <TABLE ROW>
            • FLT
            • 760D
            • DIMM
              • DIMM
            • mem code cpy err
              • mem code cpy err
            • Firmware tried to copy code from ROM to memory, but the copy didn’t match the original.
          • <TABLE ROW>
            • FLT
            • 7610
            • DIMM
              • DIMM
            • ECC wrt/read err
            • Writing and reading back good data caused memory ECC error.
          • <TABLE ROW>
            • FLT
            • 7611
            • DIMM
              • DIMM
            • ECC single data
              • ECC single data
            • Memory ECC test failed to detect single-bit data error.
              • Memory ECC test failed to detect single-bit data error.
          • <TABLE ROW>
            • FLT
            • 7612
            • DIMM
              • DIMM
            • ECC single ECC
              • ECC single ECC
            • Memory ECC test failed to detect single-bit ECC error.
              • Memory ECC test failed to detect single-bit ECC error.
          • <TABLE ROW>
            • FLT
            • 7613
            • DIMM
              • DIMM
            • ECC multipl data
              • ECC multipl data
            • Memory ECC test failed to detect multiple-bit data error.
              • Memory ECC test failed to detect multiple-bit data error.
          • <TABLE ROW>
            • FLT
            • 7614
            • DIMM
              • DIMM
            • ECC multpl signl
              • ECC multpl signl
            • Memory ECC test failed to signal multiple-bit error.
              • Memory ECC test failed to signal multiple-bit error.
          • <TABLE ROW>
            • FLT
            • 7800
            • SYS BD
              • SYS BD
            • mem err summary
              • mem err summary
            • Printing memory error summary word to RS-232.
          • <TABLE ROW>
            • FLT
            • 7801
            • SYS BD
              • SYS BD
            • bus ctrl par err
              • bus ctrl par err
            • System bus (Runway) control parity error detected.
              • System bus (Runway) control parity error detected.
          • <TABLE ROW>
            • FLT
            • 7802
            • SYS BD
              • SYS BD
            • bus addr par err
              • bus addr par err
            • System bus (Runway) address parity error detected.
              • System bus (Runway) address parity error detected.
          • <TABLE ROW>
            • FLT
            • 7803
            • SYS BD
              • SYS BD
            • bus data par err
              • bus data par err
            • System bus (Runway) data parity error detected.
              • System bus (Runway) data parity error detected.
          • <TABLE ROW>
            • FLT
            • 7804
            • SYS BD
              • SYS BD
            • mem out of range
              • mem out of range
            • Memory access outside configured memory space.
              • Memory access outside configured memory space.
          • <TABLE ROW>
            • FLT
            • 7805
            • SYS BD
              • SYS BD
            • bus broadcst err
              • bus broadcst err
            • System bus (Runway) broadcast error detected.
              • System bus (Runway) broadcast error detected.
          • <TABLE ROW>
            • FLT
            • 7806
            • SYS BD
              • SYS BD
            • mem addr par err
              • mem addr par err
            • Memory bus address parity error detected.
              • Memory bus address parity error detected.
          • <TABLE ROW>
            • FLT
            • 7807
            • SYS BD
              • SYS BD
            • mem ctlr stat wd
            • Printing memory controller status word to RS-232.
          • <TABLE ROW>
            • FLT
            • 781s
            • SYS BD
              • SYS BD
            • DIMM s uncor err
              • DIMM
            • Uncorrectable ECC error detected in DIMM s.
              • Uncorrectable ECC error detected in DIMM s.
          • <TABLE ROW>
            • FLT
            • 782s
            • SYS BD
              • SYS BD
            • DIMM s corr err
              • DIMM
            • Correctable ECC error detected in DIMM s.
              • Correctable ECC error detected in DIMM
          • <TABLE ROW>
            • FLT
            • 7840
            • SYS BD
              • SYS BD
            • unexpected HPMC
              • unexpected HPMC
            • Unexpected HPMC detected.
              • Unexpected HPMC detected.
          • <TABLE ROW>
            • FLT
              • FLT
            • 7841
              • 7841
            • SYS BD
              • SYS BD
            • mem status invld
              • mem status invld
            • Memory error status word is invalid.
              • Memory error status word is invalid.
          • <TABLE ROW>
            • FLT
            • 7842
            • SYS BD
              • SYS BD
            • mem summ invalid
              • mem summ invalid
            • Memory summary word is invalid.
              • Memory summary word is invalid.
          • <TABLE ROW>
            • FLT
            • 7843
            • SYS BD
              • SYS BD
            • fwd prog invalid
              • fwd prog invalid
            • Memory forward progress word is invalid.
              • Memory forward progress word is invalid.
          • <TABLE ROW>
            • FLT
            • 7844
            • SYS BD
              • SYS BD
            • mem HPMC summ wd
              • mem HPMC summ wd
            • Printing memory error summary word to RS-232.
          • <TABLE ROW>
            • FLT
            • 7845
            • SYS BD
              • SYS BD
            • mem ctlr stat wd
            • Printing memory controller status word to RS-232.
          • <TABLE ROW>
            • FLT
            • 7846
            • SYS BD
              • SYS BD
            • mem err overflow
              • mem err overflow
            • Multiple memory errors detected.
              • Multiple memory errors detected.
          • <TABLE ROW>
            • FLT
            • 7848
            • SYS BD
              • SYS BD
            • addr not mapped
              • addr not mapped
            • Memory address outside configured memory space.
              • Memory address outside configured memory space.
          • <TABLE ROW>
            • FLT
            • 785s
            • DIMM
              • DIMM
            • MBE in DIMM s
              • MBE in DIMM
            • Destructive memory test detected an uncorrectable memory error in DIMM s.
          • <TABLE ROW>
            • FLT
            • 786s
            • DIMM
              • DIMM
            • SBE&MBE DIMM s
              • SBE&MBE DIMM
            • Destructive memory test detected both an uncorrectable and a correctable memory error in DIMM s.
              • Destructive memory test detected both an uncorrectable and a correctable memory error in DIMM
          • <TABLE ROW>
            • FLT
            • 787s
            • DIMM
              • DIMM
            • mem err DIMM s
              • mem err DIMM
            • Destructive memory test detected a pattern compare error in DIMM s.
              • Destructive memory test detected a pattern compare error in DIMM
          • <TABLE ROW>
            • FLT
            • 788s
            • DIMM
              • DIMM
            • SBE in DIMM s
              • SBE in DIMM
            • Destructive memory test detected a correctable memory error in DIMM s.
          • <TABLE ROW>
            • FLT
            • 7890
            • DIMM
              • DIMM
            • MBE overwrt SBE
              • MBE overwrt SBE
            • Firmware replaced a correctable memory error entry in the PDT with an uncorrectable memory error ...
          • <TABLE ROW>
            • FLT
            • 7891
            • DIMM
              • DIMM
            • dup entry in PDT
              • dup entry in PDT
            • The PDT already contains an entry at that address.
              • The PDT already contains an entry at that address.
          • <TABLE ROW>
            • FLT
            • 7892
            • SYS BD
              • SYS BD
            • PDT write error
              • PDT write error
            • Error adding the entry to the PDT.
              • Error adding the entry to the PDT.
          • <TABLE ROW>
            • FLT
            • 7893
            • SYS BD
              • SYS BD
            • PDT is full
              • PDT is full
            • The PDT is full--cannot add new entry.
              • The PDT is full--cannot add new entry.
          • <TABLE ROW>
            • FLT
            • 7900
            • SYS BD
              • SYS BD
            • no DMT entry
              • no DMT entry
            • Internal error--cannot find DIMM entry.
              • Internal error--cannot find DIMM entry.
          • <TABLE ROW>
            • FLT
            • 7901
            • SYS BD
              • SYS BD
            • no rank entry
              • no rank entry
            • Internal error--cannot find rank entry.
              • Internal error--cannot find rank entry.
          • <TABLE ROW>
            • FLT
            • 7902
            • SYS BD
              • SYS BD
            • bad refrsh intvl
              • bad refrsh intvl
            • Computed refresh interval is invalid.
              • Computed refresh interval is invalid.
          • <TABLE ROW>
            • FLT
              • FLT
            • 7903
            • SYS BD
              • SYS BD
            • mem intrlv fail
              • mem intrlv fail
            • Cannot generate memory interleave.
              • Cannot generate memory interleave.
          • <TABLE ROW>
            • FLT
            • 7904
            • SYS BD
              • SYS BD
            • mem reloc failed
              • mem reloc failed
            • Cannot interleave with relocated range (3.75GB - 4.0GB).
              • Cannot interleave with relocated range (3.75GB - 4.0GB).
          • <TABLE ROW>
            • FLT
            • 7905
            • SYS BD
              • SYS BD
            • mem intrlv error
              • mem intrlv error
            • Undefined memory interleave failure.
              • Undefined memory interleave failure.
          • <TABLE ROW>
            • FLT
            • 79FF
            • SYS BD
              • SYS BD
            • mem firmware err
              • mem firmware err
            • Internal error--never expected this to happen.
              • Internal error--never expected this to happen.
          • <TABLE ROW>
            • WRN
            • 80F3
            • SYS BD
              • SYS BD
            • err rd IODC byte
            • Cannot read IODC from ROM or card.
              • Cannot read IODC from ROM or card.
          • <TABLE ROW>
            • WRN
            • 80F4
            • EXT IO
              • EXT IO
            • boot read error
            • Cannot load IODC entry_init for boot device.
              • Cannot load IODC entry_init for boot device.
          • <TABLE ROW>
            • WRN
            • 80F5
            • EXT IO
              • EXT IO
            • boot exec error
              • boot exec error
            • Error initializing boot device.
              • Error initializing boot device.
          • <TABLE ROW>
            • WRN
            • 80F6
            • EXT IO
              • EXT IO
            • boot read error
              • boot read error
            • Cannot load IODC entry_io for boot device.
              • Cannot load IODC entry_io for boot device.
          • <TABLE ROW>
            • WRN
            • 80F7
            • EXT IO
              • EXT IO
            • boot IO error
              • boot IO error
            • Error detected during boot device I/O.
              • Error detected during boot device I/O.
          • <TABLE ROW>
            • WRN
              • WRN
            • 80F8
            • EXT IO
              • EXT IO
            • invalid boot dev
              • invalid boot dev
            • Invalid boot device class; bad IODC?
              • Invalid boot device class; bad IODC?
          • <TABLE ROW>
            • WRN
            • 80FC
            • EXT IO
              • EXT IO
            • invalid boot dev
              • invalid boot dev
            • Unexpected error; bad IODC?
              • Unexpected error; bad IODC?
          • <TABLE ROW>
            • INI
            • 8800
            • IOCARD
              • IOCARD
            • PCI BusWlk start
              • PCI BusWlk start
            • Starting PCI bus and device discovery.
              • Starting PCI bus and device discovery.
          • <TABLE ROW>
            • INI
            • 88r1
            • IOCARD
              • IOCARD
            • PCI Rope r walk
              • PCI Rope
            • Starting PCI bus and device discovery on Rope r.
              • Starting PCI bus and device discovery on Rope
          • <TABLE ROW>
            • INI
            • 8802
            • IOCARD
              • IOCARD
            • PCI BusWalk done
              • PCI BusWalk done
            • PCI bus and device discovery complete.
              • PCI bus and device discovery complete.
          • <TABLE ROW>
            • INI
            • 8803
            • SYS BD
              • SYS BD
            • PCI alloc done
              • PCI alloc done
            • Done allocating address space for PCI devices.
              • Done allocating address space for PCI devices.
          • <TABLE ROW>
            • INI
            • 8804
            • SYS BD
              • SYS BD
            • PCI config done
              • PCI config done
            • Done configuring PCI devices.
              • Done configuring PCI devices.
          • <TABLE ROW>
            • FLT
            • 881r
            • IO BD
              • IO BD
            • R2PCIr not found
              • R2PCI
            • Rope-to-PCI bridge r not found.
              • Rope-to-PCI bridge
          • <TABLE ROW>
            • WRN
              • WRN
            • 882r
              • 882
            • IO BD
              • IO BD
            • R2PCIr not found
              • R2PCI
            • Rope-to-PCI bridge r initialization failed.
              • Rope-to-PCI bridge r initialization failed.
          • <TABLE ROW>
            • FLT
            • 883r
            • IO BD
              • IO BD
            • Roper config err
              • Rope
            • Rope r configuration failed.
              • Rope
          • <TABLE ROW>
            • INI
            • 884r
              • 884
            • EXT IO
              • EXT IO
            • Roper debug tggl
              • Rope
            • Rope r debug register toggled.
          • <TABLE ROW>
            • FLT
              • FLT
            • 884r
              • 884
            • EXT IO
            • Roper tgl fail
              • Rope
            • Rope r debug register toggle failed.
              • Rope
          • <TABLE ROW>
            • INI
              • INI
            • 8850
              • 8850
            • SYS BD
            • early rope0 init
              • early rope0 init
            • Initializing rope 0 for early RS-232 output.
              • Initializing rope 0 for early RS-232 output.
          • <TABLE ROW>
            • FLT
              • FLT
            • 8850
              • 8850
            • SYS BD
              • SYS BD
            • rope0 init fail
              • rope0 init fail
            • Couldn’t initialize rope 0.
              • Couldn’t initialize rope 0.
          • <TABLE ROW>
            • INI
              • INI
            • 8860
              • 8860
            • SYS BD
              • SYS BD
            • rope0 init done
              • rope0 init done
            • Rope 0 initialization complete.
              • Rope 0 initialization complete.
          • <TABLE ROW>
            • INI
              • INI
            • 8870
              • 8870
            • IO BD
              • IO BD
            • early R2PCI init
              • early R2PCI init
            • Initializing Rope-to-PCI bridge 0 for early RS-232 output.
              • Initializing Rope-to-PCI bridge 0 for early RS-232 output.
          • <TABLE ROW>
            • FLT
              • FLT
            • 8870
              • 8870
            • IO BD
              • IO BD
            • R2PCI init fail
              • R2PCI init fail
            • Couldn’t initialize Rope-to-PCI bridge 0.
              • Couldn’t initialize Rope-to-PCI bridge 0.
          • <TABLE ROW>
            • INI
              • INI
            • 8880
            • IO BD
              • IO BD
            • R2PCI init done
              • R2PCI init done
            • Rope-to-PCI bridge 0 initialization complete.
          • <TABLE ROW>
            • INI
              • INI
            • 8890
              • 8890
            • IO BD
              • IO BD
            • early Super init
              • early Super init
            • Initializing Super-I/O for early RS-232 output.
              • Initializing Super-I/O for early RS-232 output.
          • <TABLE ROW>
            • FLT
              • FLT
            • 8890
              • 8890
            • IO BD
            • Super init fail
              • Super init fail
            • Couldn’t initialize Super-I/O.
              • Couldn’t initialize Super-I/O.
          • <TABLE ROW>
            • INI
              • INI
            • 88A0
              • 88A0
            • IO BD
              • IO BD
            • Super init done
              • Super init done
            • Super-I/O initialization complete.
          • <TABLE ROW>
            • WRN
            • 8A03
            • EXT IO
              • EXT IO
            • No graph console
              • No graph console
            • Cannot re-establish communications with the graphics console.
              • Cannot re-establish communications with the graphics console.
          • <TABLE ROW>
            • WRN
            • 8A04
            • EXT IO
              • EXT IO
            • No USB keyboard
              • No USB keyboard
            • Cannot re-establish communications with the USB keyboard.
              • Cannot re-establish communications with the USB keyboard.
          • <TABLE ROW>
            • TST
            • 8C06
            • EXT IO
              • EXT IO
            • PCI BIST test
              • PCI BIST test
            • Running PCI Built-In Self-Test
              • Running PCI Built-In Self-Test
          • <TABLE ROW>
            • WRN
            • 8C07
            • EXT IO
              • EXT IO
            • PCI BIST error
              • PCI BIST error
            • PCI Built-In Self-Test failed.
              • PCI Built-In Self-Test failed.
          • <TABLE ROW>
            • WRN
            • 8C08
            • SYS BD
              • SYS BD
            • PCI alloc error
              • PCI alloc error
            • PCI address space allocation failed.
              • PCI address space allocation failed.
          • <TABLE ROW>
            • WRN
            • 8C09
            • IO BD
              • IO BD
            • PCI mem mngr err
              • PCI mem mngr err
            • Memory allocation for PCI device failed.
              • Memory allocation for PCI device failed.
          • <TABLE ROW>
            • WRN
            • 8C0A
            • EXT IO
              • EXT IO
            • PCI mem type err
              • PCI mem type err
            • PCI device requested invalid memory type.
              • PCI device requested invalid memory type.
          • <TABLE ROW>
            • WRN
            • 8C0B
            • IO BD
              • IO BD
            • PCI max bus dpth
              • PCI max bus dpth
            • PCI bus depth exceeded maximum supported depth.
              • PCI bus depth exceeded maximum supported depth.
          • <TABLE ROW>
            • WRN
            • 8C0C
            • EXT IO
              • EXT IO
            • PCI dev not cnfg
              • PCI dev not cnfg
            • Unable to configure PCI device.
              • Unable to configure PCI device.
          • <TABLE ROW>
            • WRN
            • 8C0F
            • IO BD
              • IO BD
            • dev tree ovrflow
              • dev tree ovrflow
            • Data space for PCI devices is full.
              • Data space for PCI devices is full.
          • <TABLE ROW>
            • WRN
            • 8DEC
            • IO BD
              • IO BD
            • init LAN SROM
              • init LAN SROM
            • Initializing the core LAN serial EPROM.
              • Initializing the core LAN serial EPROM.
          • <TABLE ROW>
            • SHU
            • 8DEC
            • IO BD
              • IO BD
            • resetting system
              • resetting system
            • Restarting system after core LAN initialization.
              • Restarting system after core LAN initialization.
          • <TABLE ROW>
            • FLT
            • 8E10
            • IO BD
            • PARALEL port cfg
              • PARALEL port cfg
            • Parallel port configuration failed.
              • Parallel port configuration failed.
          • <TABLE ROW>
            • FLT
            • 8E11
            • IO BD
            • SERIAL1 port cfg
              • SERIAL1 port cfg
            • Serial 1 port configuration failed.
              • Serial 1 port configuration failed.
          • <TABLE ROW>
            • FLT
            • 8E12
            • IO BD
            • SERIAL2 port cfg
              • SERIAL2 port cfg
            • Serial 2 port configuration failed.
              • Serial 2 port configuration failed.
          • <TABLE ROW>
            • FLT
            • 8E13
            • IO BD
            • FLOPPY drive cfg
              • FLOPPY drive cfg
            • Floppy drive configuration failed.
              • Floppy drive configuration failed.
          • <TABLE ROW>
            • FLT
            • 8E20
            • IO BD
            • bad USB port cfg
              • bad USB port cfg
            • USB port configuration failed.
              • USB port configuration failed.
          • <TABLE ROW>
            • WRN
            • 9001
            • EXT IO
              • EXT IO
            • no console found
              • no console found
            • Search for console display device failed.
              • Search for console display device failed.
          • <TABLE ROW>
            • INI
            • 9151
            • IO BD
              • IO BD
            • init SERIAL_1
              • init SERIAL_1
            • Initializing serial 1 port as console display.
              • Initializing serial 1 port as console display.
          • <TABLE ROW>
            • INI
            • 9152
            • IO BD
              • IO BD
            • init SERIAL_2
              • init SERIAL_2
            • Initializing serial 2 port as console display.
              • Initializing serial 2 port as console display.
          • <TABLE ROW>
            • INI
            • 915F
            • IO BD
              • IO BD
            • init unknown dev
            • Initializing unknown device as console display.
              • Initializing unknown device as console display.
          • <TABLE ROW>
            • INI
              • INI
            • 916s
            • EXT IO
              • EXT IO
            • init PCI slot s
              • init PCI slot
            • Initializing PCI device in slot s as console display.
              • Initializing PCI device in slot
          • <TABLE ROW>
            • INI
            • 91DB
            • IO BD
              • IO BD
            • init SERIAL_LDB
              • init SERIAL_LDB
            • Initializing serial LDB port as console display.
              • Initializing serial LDB port as console display.
          • <TABLE ROW>
            • INI
            • 9C51
            • IO BD
              • IO BD
            • consol is SER_1
              • consol is SER_1
            • Console display is on serial port 1.
              • Console display is on serial port 1.
          • <TABLE ROW>
            • WRN
            • 9C51
            • IO BD
              • IO BD
            • bad init SERIAL1
              • bad init SERIAL1
            • Serial port 1 failed to initialize as a console device.
              • Serial port 1 failed to initialize as a console device.
          • <TABLE ROW>
            • INI
            • 9C52
            • IO BD
              • IO BD
            • consol is SER_2
              • consol is SER_2
            • Console display is on serial port 2.
              • Console display is on serial port 2.
          • <TABLE ROW>
            • INI
            • 9160
            • EXT IO
            • builtin GRAPHICS
              • builtin GRAPHICS
            • Initializing built-in graphics as console display.
              • Initializing built-in graphics as console display.
          • <TABLE ROW>
            • WRN
            • 9C52
            • IO BD
              • IO BD
            • bad init SERIAL2
              • bad init SERIAL2
            • Serial port 2 failed to initialize as a console device.
              • Serial port 2 failed to initialize as a console device.
          • <TABLE ROW>
            • INI
            • 9C6s
            • EXT IO
              • EXT IO
            • consol is GRAPHs
              • consol is GRAPH
            • Console display is on graphics card in PCI slot s.
              • Console display is on graphics card in PCI slot
          • <TABLE ROW>
            • WRN
            • 9C6s
            • EXT IO
              • EXT IO
            • bad PCI slot s
              • bad PCI slot
            • Graphics in PCI slot s failed to initialize as a console device.
              • Graphics in PCI slot
          • <TABLE ROW>
            • INI
            • 9C8t
            • EXT IO
              • EXT IO
            • cnfg mon type t
              • cnfg mon type
            • Set graphics console to monitor type t. (Seen when cycling through types.)
              • Set graphics console to monitor type
          • <TABLE ROW>
            • WRN
            • 9C8t
            • EXT IO
              • EXT IO
            • mon type t fail
              • mon type
            • Failed to configure console to monitor type t.
              • Failed to configure console to monitor type
          • <TABLE ROW>
            • INI
            • 9CDB
            • IO BD
              • IO BD
            • consl is SER_LDB
              • consl is SER_LDB
            • Console display is on serial LDB port.
              • Console display is on serial LDB port.
          • <TABLE ROW>
            • WRN
            • 9CDB
            • IO BD
              • IO BD
            • bad init SER_LDB
              • bad init SER_LDB
            • Serial LDB port failed to initialize as a console device.
              • Serial LDB port failed to initialize as a console device.
          • <TABLE ROW>
            • FLT
            • A088
            • IO BD
              • IO BD
            • consl path fault
              • consl path fault
            • Unable to boot--no console device found.
              • Unable to boot--no console device found.
          • <TABLE ROW>
            • WRN
            • A008
            • EXT IO
              • EXT IO
            • no boot device
              • no boot device
            • Unable to boot--no bootable device found.
              • Unable to boot--no bootable device found.
          • <TABLE ROW>
            • WRN
            • A0BD
            • EXT IO
              • EXT IO
            • device not ready
              • device not ready
            • Boot device not ready--operation may be retried.
              • Boot device not ready--operation may be retried.
          • <TABLE ROW>
            • FLT
            • A0FF
            • EXT IO
              • EXT IO
            • unknown launch
              • unknown launch
            • Unable to boot. Explanation may appear on console.
              • Unable to boot. Explanation may appear on console.
          • <TABLE ROW>
            • WRN
            • A50F
            • EXT IO
              • EXT IO
            • init pri pth err
              • init pri pth err
            • Unable to boot from primary boot device.
              • Unable to boot from primary boot device.
          • <TABLE ROW>
            • WRN
            • A70F
            • EXT IO
              • EXT IO
            • init otr pth err
              • init otr pth err
            • Unable to boot from non-primary boot device.
              • Unable to boot from non-primary boot device.
          • <TABLE ROW>
            • INI
            • C10m
            • SYS BD
              • SYS BD
            • CPUm is monarch
              • CPU
            • CPU m was chosen as the monarch processor. (All other CPUs are slaves.)
              • CPU
          • <TABLE ROW>
            • INI
            • C30m
            • SYS BD
              • SYS BD
            • monarchm test
              • monarch
            • CPU m finished the monarch-only tests and system initialization.
              • CPU
          • <TABLE ROW>
            • INI
            • C30C
            • SYS BD
              • SYS BD
            • mnrch slv chck
              • mnrch slv chck
            • The monarch CPU is checking whether the slaves are in the correct rendezvous.
              • The monarch CPU is checking whether the slaves are in the correct rendezvous.
          • <TABLE ROW>
            • INI
            • C3FF
            • SYS/IO
              • SYS/IO
            • late monarch tst
              • late monarch tst
            • The monarch CPU is starting the late (post-memory) monarch-only tests.
              • The monarch CPU is starting the late (post-memory) monarch-only tests.
          • <TABLE ROW>
            • FLT
            • C3FF
            • SYS/IO
              • SYS/IO
            • late monarch flt
              • late monarch flt
            • The late (post-memory) monarch-only tests failed.
              • The late (post-memory) monarch-only tests failed.
          • <TABLE ROW>
            • INI
            • C4CC
            • SYS BD
              • SYS BD
            • initialize ccp
              • initialize ccp
            • Searching for (lab-only) debugger card.
              • Searching for (lab-only) debugger card.
          • <TABLE ROW>
            • INI
            • C4CD
            • SYS BD
              • SYS BD
            • no ccp found
              • no ccp found
            • Debugger card not found.
              • Debugger card not found.
          • <TABLE ROW>
            • INI
            • C4CE
            • SYS BD
              • SYS BD
            • ccp disabled
              • ccp disabled
            • Debugger card disabled.
              • Debugger card disabled.
          • <TABLE ROW>
            • INI
            • C4CF
            • SYS BD
              • SYS BD
            • ccp found
              • ccp found
            • Debugger card found.
              • Debugger card found.
          • <TABLE ROW>
            • INI
            • C500
            • SYS BD
              • SYS BD
            • get primary path
              • get primary path
            • Autoboot is reading primary boot path from stable store.
              • Autoboot is reading primary boot path from stable store.
          • <TABLE ROW>
            • INI
            • C540
            • EXT IO
              • EXT IO
            • init pri path
              • init pri path
            • Autoboot is trying to boot from primary boot device.
              • Autoboot is trying to boot from primary boot device.
          • <TABLE ROW>
            • INI
            • C580
            • EXT IO
              • EXT IO
            • load IPL pri pth
              • load IPL pri pth
            • Loading IPL from primary boot device.
              • Loading IPL from primary boot device.
          • <TABLE ROW>
            • WRN
            • C5F0
            • EXT IO
              • EXT IO
            • err read pri IPL
              • err read pri IPL
            • Error loading IPL from primary boot device.
              • Error loading IPL from primary boot device.
          • <TABLE ROW>
            • FLT
            • C5F0
            • EXT IO
              • EXT IO
            • pri IPL fault
              • pri IPL fault
            • Error loading IPL from primary boot device.
              • Error loading IPL from primary boot device.
          • <TABLE ROW>
            • WRN
            • C5F1
            • EXT IO
              • EXT IO
            • err read pri IPL
              • err read pri IPL
            • Cannot load IPL from primary boot device--load address invalid.
              • Cannot load IPL from primary boot device--load address invalid.
          • <TABLE ROW>
            • WRN
            • C5F2
            • EXT IO
              • EXT IO
            • err read pri IPL
              • err read pri IPL
            • Cannot load IPL from primary boot device--file is not IPL image.
              • Cannot load IPL from primary boot device--file is not IPL image.
          • <TABLE ROW>
            • WRN
            • C5F3
            • EXT IO
              • EXT IO
            • err read pri IPL
              • err read pri IPL
            • Cannot load IPL from primary boot device--IPL image size invalid.
              • Cannot load IPL from primary boot device--IPL image size invalid.
          • <TABLE ROW>
            • WRN
            • C5F4
            • EXT IO
              • EXT IO
            • err read pri IPL
              • err read pri IPL
            • Cannot load IPL from primary boot device--IPL entry point address invalid.
              • Cannot load IPL from primary boot device--IPL entry point address invalid.
          • <TABLE ROW>
            • WRN
            • C5F8
            • EXT IO
              • EXT IO
            • err read pri IPL
              • err read pri IPL
            • Cannot load IPL from primary boot device--IPL image checksum failed.
              • Cannot load IPL from primary boot device--IPL image checksum failed.
          • <TABLE ROW>
            • INI
            • C5FF
            • <blank>
            • launch pri IPL
              • launch pri IPL
            • Booting from primary boot path.
              • Booting from primary boot path.
          • <TABLE ROW>
            • INI
            • C642
            • EXT IO
              • EXT IO
            • init kybrd consl
              • init kybrd consl
            • Try to initialize USB keyboard.
              • Try to initialize USB keyboard.
          • <TABLE ROW>
            • FLT
            • C642
            • EXT IO
              • EXT IO
            • keyboard error
              • keyboard error
            • An error was detected trying to access the keyboard.
              • An error was detected trying to access the keyboard.
          • <TABLE ROW>
            • WRN
              • WRN
            • C643
              • C643
            • EXT IO
              • EXT IO
            • keyboard reinit
              • keyboard reinit
            • Keyboard was re-initialized.
          • <TABLE ROW>
            • WRN
            • C64F
            • EXT IO
              • EXT IO
            • reset montr type
              • reset montr type
            • The console device failed to initialize with the given monitor type. Try again with type 1.
              • The console device failed to initialize with the given monitor type. Try again with type 1.
          • <TABLE ROW>
            • TST
            • C680
            • SYS BD
              • SYS BD
            • builtin graphics
              • builtin graphics
            • Look for built-in graphics card.
          • <TABLE ROW>
            • TST
            • C68s
            • SYS BD
              • SYS BD
            • test graph in s
              • test graph in
            • Look for graphics card in PCI slot s.
              • Look for graphics card in PCI slot
          • <TABLE ROW>
            • INI
            • C68s
            • SYS BD
              • SYS BD
            • init graph in s
              • init graph in s
            • Successfully initialized graphics card in PCI slot s.
          • <TABLE ROW>
            • WRN
            • C680
            • SYS BD
              • SYS BD
            • bultin graphics
              • bultin graphics
            • built-in graphics initialization failed.
              • built-in graphics initialization failed.
          • <TABLE ROW>
            • WRN
            • C68s
            • SYS BD
              • SYS BD
            • fail graph in s
              • fail graph in
            • Card in PCI slot s failed graphics initialization or is not a graphics card.
              • Card in PCI slot
          • <TABLE ROW>
            • INI
            • C740
            • EXT IO
              • EXT IO
            • init other path
              • init other path
            • Autoboot is trying to boot from non-primary boot device.
              • Autoboot is trying to boot from non-primary boot device.
          • <TABLE ROW>
            • INI
              • INI
            • C780
            • EXT IO
              • EXT IO
            • ld IPL othr path
              • ld IPL othr path
            • Loading IPL from non-primary boot device.
              • Loading IPL from non-primary boot device.
          • <TABLE ROW>
            • WRN
            • C7F0
            • EXT IO
              • EXT IO
            • other IPL fault
              • other IPL fault
            • Error loading IPL from non-primary boot device.
              • Error loading IPL from non-primary boot device.
          • <TABLE ROW>
            • WRN
            • C7F1
            • EXT IO
              • EXT IO
            • bad alt IPL read
              • bad alt IPL read
            • Cannot load IPL from non-primary boot device--load address invalid.
              • Cannot load IPL from non-primary boot device--load address invalid.
          • <TABLE ROW>
            • WRN
            • C7F2
            • EXT IO
              • EXT IO
            • bad alt IPL read
              • bad alt IPL read
            • Cannot load IPL from non-primary boot device--file is not IPL image.
              • Cannot load IPL from non-primary boot device--file is not IPL image.
          • <TABLE ROW>
            • WRN
            • C7F3
            • EXT IO
              • EXT IO
            • bad alt IPL read
              • bad alt IPL read
            • Cannot load IPL from non-primary boot device--IPL image size invalid.
              • Cannot load IPL from non-primary boot device--IPL image size invalid.
          • <TABLE ROW>
            • WRN
            • C7F4
            • EXT IO
              • EXT IO
            • bad alt IPL read
              • bad alt IPL read
            • Cannot load IPL from non-primary boot device--IPL entry point address invalid.
              • Cannot load IPL from non-primary boot device--IPL entry point address invalid.
          • <TABLE ROW>
            • WRN
            • C7F8
            • EXT IO
              • EXT IO
            • bad alt IPL read
              • bad alt IPL read
            • Cannot load IPL from non-primary boot device--IPL image checksum failed.
              • Cannot load IPL from non-primary boot device--IPL image checksum failed.
          • <TABLE ROW>
            • WRN
            • C7FF
            • <blank>
            • launch IPL other
              • launch IPL other
            • Booting from a device other than the primary boot path.
              • Booting from a device other than the primary boot path.
          • <TABLE ROW>
            • INI
            • CB00
            • SYS BD
              • SYS BD
            • TOC initiated
              • TOC initiated
            • A Transfer of Control entered the firmware TOC handler.
              • A Transfer of Control entered the firmware TOC handler.
          • <TABLE ROW>
            • WRN
            • CB01
            • SYS BD
              • SYS BD
            • no OS TOC vector
              • no OS TOC vector
            • There is no TOC vector for the operating system. Firmware will soft boot the system.
              • There is no TOC vector for the operating system. Firmware will soft boot the system.
          • <TABLE ROW>
            • WRN
            • CB02
            • SYS BD
              • SYS BD
            • bad OS TOC addr
              • bad OS TOC addr
            • The operating system TOC handler vector is invalid. Firmware will soft boot the system.
              • The operating system TOC handler vector is invalid. Firmware will soft boot the system.
          • <TABLE ROW>
            • WRN
            • CB03
            • SYS BD
              • SYS BD
            • bad OS TOC code
              • bad OS TOC code
            • The operating system TOC handler is invalid. Firmware will soft boot the system.
              • The operating system TOC handler is invalid. Firmware will soft boot the system.
          • <TABLE ROW>
            • WRN
            • CB04
            • SYS BD
              • SYS BD
            • bad OS TOC len
              • bad OS TOC len
            • The size of the operating system TOC handler is invalid. Firmware will soft boot the system.
              • The size of the operating system TOC handler is invalid. Firmware will soft boot the system.
          • <TABLE ROW>
            • WRN
            • CB05
              • CB05
            • SYS BD
              • SYS BD
            • bad OS TOC chksm
              • bad OS TOC chksm
            • The operating system TOC handler failed the checksum test. Firmware will soft boot the system.
              • The operating system TOC handler failed the checksum test. Firmware will soft boot the system.
          • <TABLE ROW>
            • WRN
            • CB0A
            • SYS BD
              • SYS BD
            • prev TOC logged
              • prev TOC logged
            • Firmware detected unread PIM data from a previous TOC and will not overwrite it. (PIM for this TO...
              • Firmware detected unread PIM data from a previous TOC and will not overwrite it. (PIM for this TO...
          • <TABLE ROW>
            • INI
            • CB0B
            • SYS BD
              • SYS BD
            • branch to OS TOC
              • branch to OS TOC
            • Branching to the operating system TOC handler.
              • Branching to the operating system TOC handler.
          • <TABLE ROW>
            • WRN
            • CB0C
            • SYS BD
              • SYS BD
            • br OS TOC failed
              • br OS TOC failed
            • Branch to the operating system TOC handler failed. Firmware will soft boot the system.
              • Branch to the operating system TOC handler failed. Firmware will soft boot the system.
          • <TABLE ROW>
            • WRN
            • CB10
            • SYS BD
              • SYS BD
            • LPMC initiated
              • LPMC initiated
            • A Low-Priority Machine Check entered the firmware LPMC handler. The handler should log the error ...
              • A Low-Priority Machine Check entered the firmware LPMC handler. The handler should log the error ...
          • <TABLE ROW>
            • WRN
            • CB11
            • SYS BD
              • SYS BD
            • icache LPMC err
            • An instruction cache parity error caused the LPMC.
              • An instruction cache parity error caused the LPMC.
          • <TABLE ROW>
            • WRN
            • CB12
            • SYS BD
              • SYS BD
            • dcache LPMC err
              • dcache LPMC err
            • A data cache parity/ECC error caused the LPMC.
              • A data cache parity/ECC error caused the LPMC.
          • <TABLE ROW>
            • WRN
            • CB13
            • SYS BD
              • SYS BD
            • dcache tag error
              • dcache tag error
            • The parity error is in the tag portion of the data cache.
              • The parity error is in the tag portion of the data cache.
          • <TABLE ROW>
            • WRN
            • CB14
            • SYS BD
              • SYS BD
            • dcache data err
              • dcache data err
            • The parity error is in the data portion of the data cache.
              • The parity error is in the data portion of the data cache.
          • <TABLE ROW>
            • FLT
            • CB1F
            • SYS BD
              • SYS BD
            • OS LPMC failed
              • OS LPMC failed
            • Firmware couldn’t branch to the operating system LPMC handler. It will halt the CPU, requiring a ...
              • Firmware couldn’t branch to the operating system LPMC handler. It will halt the CPU, requiring a ...
          • <TABLE ROW>
            • WRN
            • CB71
            • SYS BD
              • SYS BD
            • HPMC occurred
              • HPMC occurred
            • A High-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler).
              • A High-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler).
          • <TABLE ROW>
            • WRN
            • CB72
            • SYS BD
              • SYS BD
            • LPMC occurred
              • LPMC occurred
            • A Low-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler).
              • A Low-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler).
          • <TABLE ROW>
            • WRN
            • CB73
            • SYS BD
              • SYS BD
            • TOC occurred
              • TOC occurred
            • A Transfer of Control caused entry to PDCE_CHECK (the firmware trap handler).
              • A Transfer of Control caused entry to PDCE_CHECK (the firmware trap handler).
          • <TABLE ROW>
            • FLT
            • CB9r
            • IO BD
              • IO BD
            • Error on roper
              • Error on rope
            • An error was detected on rope r.
              • An error was detected on rope
          • <TABLE ROW>
            • FLT
            • CB99
            • SYS BD
              • SYS BD
            • seed IVA handler
              • seed IVA handler
            • PDC_SEED_ERROR triggered an HPMC.
              • PDC_SEED_ERROR triggered an HPMC.
          • <TABLE ROW>
            • FLT
            • CB9A
            • SYS BD
              • SYS BD
            • HPMC overwrite
              • HPMC overwrite
            • Firmware is overwriting PIM data from a previous HPMC.
              • Firmware is overwriting PIM data from a previous HPMC.
          • <TABLE ROW>
            • OFF
            • CBA1
            • SYS BD
              • SYS BD
            • AIOC int dat err
              • AIOC int dat err
            • I/O controller internal error.
              • I/O controller internal error.
          • <TABLE ROW>
            • OFF
            • CBA2
            • IO BD
              • IO BD
            • EtoA rope perr
              • EtoA rope perr
            • Parity error between I/O controller and Rope-to-PCI bridge.
              • Parity error between I/O controller and Rope-to-PCI bridge.
          • <TABLE ROW>
            • OFF
            • CBA3
            • SYS BD
              • SYS BD
            • access invld TLB
              • access invld TLB
            • An invalid I/O TLB entry was accessed.
              • An invalid I/O TLB entry was accessed.
          • <TABLE ROW>
            • OFF
            • CBA4
            • IO BD
              • IO BD
            • EtoA rp cmd perr
              • EtoA rp cmd perr
            • Command parity error between I/O controller and Rope-to-PCI bridge.
              • Command parity error between I/O controller and Rope-to-PCI bridge.
          • <TABLE ROW>
            • OFF
            • CBA5
            • IO BD
              • IO BD
            • CDF timeout
              • CDF timeout
            • Rope Command/Data FIFO is backed up.
              • Rope Command/Data FIFO is backed up.
          • <TABLE ROW>
            • OFF
            • CBA6
            • IO BD
              • IO BD
            • R2PCI resp tmout
              • R2PCI resp tmout
            • Rope-to-PCI bridge timed out. Could be a failure of the PCI card, rope, or R2PCI bridge.
              • Rope-to-PCI bridge timed out. Could be a failure of the PCI card, rope, or R2PCI bridge.
          • <TABLE ROW>
            • OFF
            • CBA7
            • IO BD
              • IO BD
            • Unknown AIOC err
              • Unknown AIOC err
            • Unknown I/O controller error.
              • Unknown I/O controller error.
          • <TABLE ROW>
            • OFF
            • CBB1
            • IO BD
              • IO BD
            • PCI timeout
              • PCI timeout
            • A PCI card requested the bus but failed to use it.
              • A PCI card requested the bus but failed to use it.
          • <TABLE ROW>
            • OFF
            • CBB2
            • IO BD
              • IO BD
            • PCI timeout; OV
              • PCI timeout; OV
            • More than once aPCI card requested the bus but failed to use it.
              • More than once aPCI card requested the bus but failed to use it.
          • <TABLE ROW>
            • OFF
            • CBB3
            • IO BD
              • IO BD
            • R2PCI intrnl err
              • R2PCI intrnl err
            • Rope-to-PCI bridge internal error.
              • Rope-to-PCI bridge internal error.
          • <TABLE ROW>
            • OFF
            • CBB4
            • IO BD
              • IO BD
            • R2PCI int err;OV
              • R2PCI int err;OV
            • Multiple Rope-to-PCI bridge internal errors.
              • Multiple Rope-to-PCI bridge internal errors.
          • <TABLE ROW>
            • OFF
            • CBB6
            • IO BD
              • IO BD
            • PCI data req err
              • PCI data req err
            • PCI bus data requestor error: R2PCI detected PERR# assertion.
          • <TABLE ROW>
            • OFF
            • CBB8
            • IO BD
              • IO BD
            • PCI D req err;OV
              • PCI D req err;OV
            • Rope-to-PCI bridge detected multiple PERR# assertions.
              • Rope-to-PCI bridge detected multiple PERR# assertions.
          • <TABLE ROW>
            • OFF
            • CBBA
            • IO BD
              • IO BD
            • PCI data par err
            • PCI bus data parity error.
              • PCI bus data parity error.
          • <TABLE ROW>
            • OFF
            • CBBC
            • IO BD
              • IO BD
            • PCI Dpar err;OV
              • PCI Dpar err;OV
            • Multiple PCI bus data parity errors.
              • Multiple PCI bus data parity errors.
          • <TABLE ROW>
            • OFF
            • CBBE
            • IO BD
              • IO BD
            • R2PCI intrnl err
              • R2PCI intrnl err
            • Error in R2PCI internal data to PCI bus.
              • Error in R2PCI internal data to PCI bus.
          • <TABLE ROW>
            • OFF
            • CBC0
            • IO BD
              • IO BD
            • R2PCI int err;OV
              • R2PCI int err;OV
            • Multiple R2PCI internal data to PCI bus errors.
              • Multiple R2PCI internal data to PCI bus errors.
          • <TABLE ROW>
            • OFF
            • CBC2
            • IO BD
              • IO BD
            • PCI data parity
              • PCI data parity
            • PCI data parity error. I/O error log word 3 contains the error address.
              • PCI data parity error. I/O error log word 3 contains the error address.
          • <TABLE ROW>
            • OFF
            • CBC4
            • IO BD
              • IO BD
            • PCI data par; OV
              • PCI data par; OV
            • Multiple PCI data parity errors. I/O error log word 3 contains the error address.
              • Multiple PCI data parity errors. I/O error log word 3 contains the error address.
          • <TABLE ROW>
            • OFF
            • CBC6
            • IO BD
              • IO BD
            • R2PCI intrnl err
              • R2PCI intrnl err
            • Rope-to-PCI bridge internal data error: R2PCI detected PERR# assertion.
              • Rope-to-PCI bridge internal data error: R2PCI detected PERR# assertion.
          • <TABLE ROW>
            • OFF
            • CBC8
            • IO BD
              • IO BD
            • R2PCI int err;OV
              • R2PCI int err;OV
            • Multiple R2PCI internal data errors: R2PCI detected multiple PERR# assertions.
              • Multiple R2PCI internal data errors: R2PCI detected multiple PERR# assertions.
          • <TABLE ROW>
            • OFF
            • CBCA
            • IO BD
              • IO BD
            • PCI data rs err
              • PCI data rs err
            • PCI bus data responder error: R2PCI detected PERR# assertion.
              • PCI bus data responder error: R2PCI detected PERR# assertion.
          • <TABLE ROW>
            • OFF
            • CBCC
            • IO BD
              • IO BD
            • PCI D rs err; OV
              • PCI D rs err; OV
            • Multiple PCI bus data responder errors: R2PCI detected multiple PERR# assertions.
              • Multiple PCI bus data responder errors: R2PCI detected multiple PERR# assertions.
          • <TABLE ROW>
            • OFF
            • CBCE
            • IO BD
              • IO BD
            • R2PCI T-Abort
              • R2PCI T-Abort
            • Rope-to-PCI bridge signalled Target Abort.
              • Rope-to-PCI bridge signalled Target Abort.
          • <TABLE ROW>
            • OFF
            • CBD0
            • IO BD
              • IO BD
            • R2PCI T-Abort;OV
              • R2PCI T-Abort;OV
            • Rope-to-PCI bridge signalled multiple Target Aborts.
              • Rope-to-PCI bridge signalled multiple Target Aborts.
          • <TABLE ROW>
            • OFF
            • CBD2
            • IO BD
              • IO BD
            • PCI parity err
              • PCI parity err
            • PCI address/command parity error.
              • PCI address/command parity error.
          • <TABLE ROW>
            • OFF
            • CBD4
            • IO BD
              • IO BD
            • PCI par err; OV
              • PCI par err; OV
            • Multiple PCI address/command parity errors.
              • Multiple PCI address/command parity errors.
          • <TABLE ROW>
            • OFF
            • CBD6
            • IO BD
              • IO BD
            • PCI no DEVSEL#
              • PCI no DEVSEL#
            • No PCI device selected (DEVSEL# assertion). I/O error log word 3 contains the error address.
              • No PCI device selected (DEVSEL# assertion). I/O error log word 3 contains the error address.
          • <TABLE ROW>
            • OFF
            • CBD8
            • IO BD
              • IO BD
            • PCI no DEVSEL;OV
              • PCI no DEVSEL;OV
            • Multiple DEVSEL# assertions. I/O error log word 3 contains the error address.
              • Multiple DEVSEL# assertions. I/O error log word 3 contains the error address.
          • <TABLE ROW>
            • OFF
            • CBDA
            • IO BD
              • IO BD
            • PCI target abort
              • PCI target abort
            • A PCI device signalled Target Abort. I/O error log word 3 contains the error address.
              • A PCI device signalled Target Abort. I/O error log word 3 contains the error address.
          • <TABLE ROW>
            • OFF
            • CBDC
            • IO BD
              • IO BD
            • PCI T-Abort; OV
              • PCI T-Abort; OV
            • A PCI device signalled multiple Target Aborts. I/O error log word 3 contains the error address.
              • A PCI device signalled multiple Target Aborts. I/O error log word 3 contains the error address.
          • <TABLE ROW>
            • OFF
            • CBDD
            • IO BD
              • IO BD
            • PCI assrts LOCK#
              • PCI assrts LOCK#
            • A PCI device asserted LOCK#.
              • A PCI device asserted LOCK#.
          • <TABLE ROW>
            • OFF
            • CBDE
            • IO BD
              • IO BD
            • PCI LOCK#; OV
              • PCI LOCK#; OV
            • A PCI device asserted LOCK# multiple times.
              • A PCI device asserted LOCK# multiple times.
          • <TABLE ROW>
            • OFF
            • CBE0
            • IO BD
              • IO BD
            • PCI assrts SERR#
              • PCI assrts SERR#
            • A PCI device asserted SERR#: address parity error or other system error.
              • A PCI device asserted SERR#: address parity error or other system error.
          • <TABLE ROW>
            • OFF
            • CBE2
            • IO BD
              • IO BD
            • PCI SERR#; OV
              • PCI SERR#; OV
            • A PCI device asserted SERR# multiple times.
              • A PCI device asserted SERR# multiple times.
          • <TABLE ROW>
            • OFF
            • CBE3
            • IO BD
              • IO BD
            • Unknown PCI err
              • Unknown PCI err
            • Unknown PCI error detected.
              • Unknown PCI error detected.
          • <TABLE ROW>
            • OFF
            • CBE6
            • SYS BD
              • SYS BD
            • AtoE rope perr
              • AtoE rope perr
            • Parity error between system I/O controller and Rope-to-PCI bridge.
              • Parity error between system I/O controller and Rope-to-PCI bridge.
          • <TABLE ROW>
            • OFF
            • CBE7
            • IO BD
              • IO BD
            • R2PCI intrnl err
              • R2PCI intrnl err
            • Rope-to-PCI bridge internal data error.
              • Rope-to-PCI bridge internal data error.
          • <TABLE ROW>
            • OFF
            • CBE8
            • SYS BD
              • SYS BD
            • AtoE rope perr
              • AtoE rope perr
            • Command parity error between system I/O controller and Rope-to-PCI bridge.
              • Command parity error between system I/O controller and Rope-to-PCI bridge.
          • <TABLE ROW>
            • OFF
            • CBE9
            • IO BD
              • IO BD
            • Unknown Rope err
              • Unknown Rope err
            • Unknown rope error occurred.
              • Unknown rope error occurred.
          • <TABLE ROW>
            • FLT
            • CBF0
            • SYS BD
              • SYS BD
            • HPMC initiated
              • HPMC initiated
            • A High-Priority Machine Check entered the firmware HPMC handler.
              • A High-Priority Machine Check entered the firmware HPMC handler.
          • <TABLE ROW>
            • FLT
            • CBF1
            • SYS BD
              • SYS BD
            • no OS HPMC IVA
              • no OS HPMC IVA
            • There is no HPMC vector for the operating system. Firmware will halt the CPU, requiring a power c...
              • There is no HPMC vector for the operating system. Firmware will halt the CPU, requiring a power c...
          • <TABLE ROW>
            • FLT
            • CBF2
            • SYS BD
              • SYS BD
            • bad OS HPMC len
              • bad OS HPMC len
            • The size of the operating system HPMC handler is invalid. Firmware will halt the CPU, requiring a...
              • The size of the operating system HPMC handler is invalid. Firmware will halt the CPU, requiring a...
          • <TABLE ROW>
            • FLT
            • CBF3
            • SYS BD
              • SYS BD
            • bad OS HPMC addr
              • bad OS HPMC addr
            • The operating system HPMC handler vector is invalid. Firmware will halt the CPU, requiring a powe...
              • The operating system HPMC handler vector is invalid. Firmware will halt the CPU, requiring a powe...
          • <TABLE ROW>
            • FLT
            • CBF4
            • SYS BD
              • SYS BD
            • bad OS HPMC cksm
              • bad OS HPMC cksm
            • The operating system HPMC handler failed the checksum test. Firmware will halt the CPU, requiring...
              • The operating system HPMC handler failed the checksum test. Firmware will halt the CPU, requiring...
          • <TABLE ROW>
            • FLT
            • CBF5
            • SYS BD
              • SYS BD
            • OS HPMC vector 0
              • OS HPMC vector 0
            • The size of the operating system HPMC handler is zero. Firmware will halt the CPU, requiring a po...
              • The size of the operating system HPMC handler is zero. Firmware will halt the CPU, requiring a po...
          • <TABLE ROW>
            • WRN
            • CBFA
            • SYS BD
              • SYS BD
            • prev HPMC logged
              • prev HPMC logged
            • Firmware detected unread PIM data from a previous HPMC and will overwrite it.
              • Firmware detected unread PIM data from a previous HPMC and will overwrite it.
          • <TABLE ROW>
            • FLT
            • CBFB
            • SYS BD
              • SYS BD
            • brnch to OS HPMC
              • brnch to OS HPMC
            • Branching to the operating system HPMC handler.
              • Branching to the operating system HPMC handler.
          • <TABLE ROW>
            • FLT
            • CBFC
            • SYS BD
              • SYS BD
            • OS HPMC br err
              • OS HPMC br err
            • Branch to the operating system HPMC handler failed. Firmware will halt the CPU, requiring a power...
              • Branch to the operating system HPMC handler failed. Firmware will halt the CPU, requiring a power...
          • <TABLE ROW>
            • FLT
            • CBFD
            • SYS BD
              • SYS BD
            • unknown check
              • unknown check
            • The firmware trap handler didn’t detect an HPMC, LPMC, or TOC.
              • The firmware trap handler didn’t detect an HPMC, LPMC, or TOC.
          • <TABLE ROW>
            • FLT
            • CBFE
            • SYS BD
              • SYS BD
            • HPMC during TOC
              • HPMC during TOC
            • A High-Priority Machine Check occurred during Transfer of Control processing.
              • A High-Priority Machine Check occurred during Transfer of Control processing.
          • <TABLE ROW>
            • FLT
            • CBFF
            • SYS BD
              • SYS BD
            • multiple HPMCs
              • multiple HPMCs
            • A High-Priority Machine Check occurred while processing another HPMC.
              • A High-Priority Machine Check occurred while processing another HPMC.
          • <TABLE ROW>
            • INI
            • CC0n
            • SYS BD
              • SYS BD
            • CPUn OS rendezvs
              • CPU
            • Slave CPU n entering the final rendezvous, waiting for the operating system to awaken it.
              • Slave CPU
          • <TABLE ROW>
            • INI
            • CC1n
            • SYS BD
            • CPUn early rend
              • CPU
            • Slave CPU n entering the early rendezvous, waiting for the monarch CPU to initialize scratch RAM ...
              • Slave CPU
          • <TABLE ROW>
            • INI
            • CC2n
            • SYS BD
              • SYS BD
            • CPUn rendezvous
              • CPU
            • Slave CPU n entering rendezvous. Slave CPUs enter this rendezvous numerous times during boot.
              • Slave CPU
          • <TABLE ROW>
            • INI
            • CC3n
            • SYS BD
              • SYS BD
            • CPUn cache rend
              • CPU
            • Slave CPU n entering cached rendezvous, waiting for the monarch CPU to configure the system bus.
              • Slave CPU
          • <TABLE ROW>
            • INI
            • CC4n
            • SYS BD
              • SYS BD
            • CPUn mem rendez
              • CPU
            • Slave CPU n entering memory rendezvous, waiting for the monarch CPU to select a boot device.
              • Slave CPU
          • <TABLE ROW>
            • TST
            • D000
            • SYS BD
              • SYS BD
            • micro controller
            • Firmware is initializing communications with the system controller.
              • Firmware is initializing communications with the system controller.
          • <TABLE ROW>
            • WRN
            • D004
            • SYS BD
              • SYS BD
            • micro not resp
              • micro not resp
            • Firmware detected a communications error with the system controller.
              • Firmware detected a communications error with the system controller.
          • <TABLE ROW>
            • INI
            • D005
            • SYS BD
              • SYS BD
            • set dom1 fan spd
              • set dom1 fan spd
            • Firmware is initializing communications with the system controller.
              • Firmware is initializing communications with the system controller.
          • <TABLE ROW>
            • INI
            • D006
            • SYS BD
              • SYS BD
            • set dom2 fan spd
            • Firmware is initializing communications with the system controller.
              • Firmware is initializing communications with the system controller.
          • <TABLE ROW>
            • WRN
            • D007
            • SYS BD
              • SYS BD
            • bad microctl cmd
              • bad microctl cmd
            • Firmware detected a communications error with the system controller.
              • Firmware detected a communications error with the system controller.
          • <TABLE ROW>
            • FLT
            • D01n
            • SYS/IO
              • SYS/IO
            • fan n: failure!
              • fan
            • Firmware detected system fan n stopped.
              • Firmware detected system fan
          • <TABLE ROW>
            • WRN
            • D02n
            • SYS/IO
              • SYS/IO
            • fan n: too slow!
              • fan
            • Firmware detected system fan n is running too slowly.
              • Firmware detected system fan
    • Memory Failures
      • Memory Failures
      • The B Class and C Class system requires Memory Page Deallocation to be implemented. This feature ...
        • The B Class and C Class system requires Memory Page Deallocation to be implemented. This feature ...
        • HP-UX 10.x uses information to map out failing memory areas and continue normal operation. You ca...
      • # /usr/sbin/sysdiag
        • # /usr/sbin/sysdiag
        • Enter
      • DUI > logtool
        • DUI > logtool
        • Enter
      • LOGTOOL> memrpt detail
        • LOGTOOL> memrpt detail
        • Enter
      • The PDT can also be checked using the
      • For allowable memory configurations see Chapter 2 of this manual.
  • troubleshooting:system verification tests,
    • troubleshooting:system verification tests,
      • troubleshooting:system verification tests,
    • HP-UX uses an on-line diagnostics product named Mesa (Support Tools Manager) that allows system o...
      • HP-UX uses an on-line diagnostics product named Mesa (Support Tools Manager) that allows system o...
      • Three interfaces are available with the Support Tools Manager:
      • • a command line interface (accessed through the
        • • a command line interface (accessed through the
          • • a command line interface (accessed through the
        • • a menu-driven interface (accessed through the
          • • a menu-driven interface (accessed through the
        • • a graphical user interface (accessed through the
          • • a graphical user interface (accessed through the
      • For more information on these user interfaces, see the on-line man pages by entering the followin...
    • man cstm
      • man cstm
      • Enter
    • man xstm 
      • man xstm 
    • For information on the enhanced on-line diagnostics, see the enhanced on-line diagnostics, see the
    • To access the Support Tools Manager, perform the following steps:
    • 1. In a terminal window, type the following at the # prompt to invoke the command line interface:
      • 1. In a terminal window, type the following at the # prompt to invoke the command line interface:
        • 1. In a terminal window, type the following at the # prompt to invoke the command line interface:
        • # cstm
          • # cstm
      • 2. The following message appears:
        • 2. The following message appears:
        • Support Tools Manager
          • Support Tools Manager
        • Type ‘
        • CSTM>
          • CSTM>
      • 3. To verify the system operation, type the following at the
        • 3. To verify the system operation, type the following at the
        • CSTM>
          • CSTM>
        • Messages similar to the following appear:
        • Verification has started on device (CPU).
          • Verification has started on device (CPU).
        • Verification has started on device (FPU).
          • Verification has started on device (FPU).
        • CSTM> Verification of(FPU)has completed.
          • CSTM> Verification of(FPU)has completed.
        • CSTM> Verification of(CPU) has completed.
          • CSTM> Verification of(CPU) has completed.
      • 4. Press
        • 4. Press
      • 5. To exit the Support Tools Manager, enter the following:
        • 5. To exit the Support Tools Manager, enter the following:
          • CSTM>
    • If any tests failed, run Self Test and ISL diagnostics to isolate the problem.
  • troubleshooting:ODE,
    • troubleshooting:ODE,
      • troubleshooting:ODE,
    • The Offline Diagnostic Environment (ODE) consists of diagnostic modules for testing and verifying...
    • ODE is an ISL utility. To boot ODE:
    • Not all of the test modules are available on all systems. To see what test modules are available ...
    • • wdiag
      • • wdiag
        • • wdiag
          • • wdiag
      • • memtest
        • • memtest
          • • memtest
      • • mapper
        • • mapper
          • • mapper
      • • astrodiag
        • • astrodiag
          • • astrodiag
      • • siodiag
        • • siodiag
          • • siodiag
    • For further information on the various ODE commands and a complete listing of the command set, type
• FRU:,
  • FRU:,
    • FRU:,
  • This chapter lists the HP Visualize B Class and C Class Workstation Field Replaceable Units (FRUs...
    • This chapter lists the HP Visualize B Class and C Class Workstation Field Replaceable Units (FRUs...
  • WARNING For all removal and replacement procedures in this chapter, you must power off the workst...
    • WARNING For all removal and replacement procedures in this chapter, you must power off the workst...
  • NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all screws are ...
    • NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all screws are ...
  • Use the following tools to remove or replace FRUs:
  • • Torx T-10 driver
    • • Torx T-10 driver
      • • Torx T-10 driver
    • • Torx T-15 driver
      • • Torx T-15 driver
    • • Light duty flat blade screw driver with 6-inch (150mm) blade
      • • Light duty flat blade screw driver with 6-inch (150mm) blade
    • • Needle-nose pliers
      • • Needle-nose pliers
    • • ESD equipment (see
      • • ESD equipment (see
    • • Pen knife
      • • Pen knife
  • NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all gasket mate...
    • NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all gasket mate...
  • Figure 41.
    • Figure 41.
  • Refer to this figure for the locations of the various workstation FRUs while performing the FRU r...
  • B1000/C3000:main components,
    • B1000/C3000:main components,
      • B1000/C3000:main components,
    • <GRAPHIC>
  • Figure42. CD Drive Bracket Assembly
    • Figure42. CD Drive Bracket Assembly
    • <GRAPHIC>
  • Figure 42.
    • Figure 42.
  • Figure43. Floppy Drive Bracket Assembly
    • Figure43. Floppy Drive Bracket Assembly
    • <GRAPHIC>
  • Figure 43.
    • Figure 43.
  • Figure44. Hard Disk Drive Bracket Assembly
    • Figure44. Hard Disk Drive Bracket Assembly
    • <GRAPHIC>
  • Figure 4-4 shows the Hard Disk Drive Bracket Assembly FRUs for the B Class and C Class workstation.
  • FRU:exchange and non-exchange,
    • FRU:exchange and non-exchange,
      • FRU:exchange and non-exchange,
    • In this chapter we refer to exchange and non-exchange part numbers.
    • You must return FRUs with exchange part numbers in exchange for a replacement FRU. Do
    • Each of the B Class and C Class workstation exploded views show field replaceable units. Table 4-...
    • FRUs Part Numbers
      • FRUs Part Numbers
      • <TABLE>
        • Table41. Exchange Parts FRU List
        • <TABLE HEADING>
          • <TABLE ROW>
            • Part Number
            • Description
        • <TABLE BODY>
          • <TABLE ROW>
            • A4986-69012
            • 300MHz B1000 CPU Assembly
              • 300MHz B1000 CPU Assembly
          • <TABLE ROW>
            • A4986-69014
            • 400MHz C3000 CPU Assembly
          • <TABLE ROW>
            • A3862-69501
            • 256 MByte SDRAM DIMM
          • <TABLE ROW>
            • A3860-69501
              • A3860-69501
            • 128 MByte SDRAM DIMM
          • <TABLE ROW>
            • A1658-69028
            • 9GB 7200 RPM LVD Disk
          • <TABLE ROW>
            • A1658-69026
            • 18GB 10K RPM Disk
          • <TABLE ROW>
            • A1658-69027
            • 9GB 10K RPM Disk
          • <TABLE ROW>
            • A4986-69001
            • 500W Power Supply
      • <TABLE>
        • Table42. Non-exchange Parts FRU List
        • <TABLE HEADING>
          • <TABLE ROW>
            • Part Number
            • Description
              • Description
        • <TABLE BODY>
          • <TABLE ROW>
            • A4986-66530
              • A4986-66530
            • SCA Disk Backplane
              • SCA Disk Backplane
          • <TABLE ROW>
            • D2035-60282
            • Floppy Drive
          • <TABLE ROW>
            • D4385-60001
              • D4385-60001
            • 32x ATAPI CD Drive
              • 32x ATAPI CD Drive
          • <TABLE ROW>
            • A4978-62005
              • A4978-62005
            • SCA - drive bracket
              • SCA - drive bracket
          • <TABLE ROW>
            • A4978-62006
              • A4978-62006
            • CD Drive bracket assembly
              • CD Drive bracket assembly
          • <TABLE ROW>
            • A4986-62006
              • A4986-62006
            • Floppy Disk Drive bracket assembly
              • Floppy Disk Drive bracket assembly
          • <TABLE ROW>
            • 5063-4513
              • 5063-4513
            • Speaker
              • Speaker
          • <TABLE ROW>
            • A4978-62025
              • A4978-62025
            • LCD/ Power Switch
              • LCD/ Power Switch
          • <TABLE ROW>
            • A4978-62012
              • A4978-62012
            • Fan- 92 mm
              • Fan- 92 mm
          • <TABLE ROW>
            • A4978-62013
              • A4978-62013
            • Fan - 120 mm
              • Fan - 120 mm
          • <TABLE ROW>
            • A4978-68501
              • A4978-68501
            • Fan - 80 mm - low profile
              • Fan - 80 mm - low profile
          • <TABLE ROW>
            • A4983-60401
              • A4983-60401
            • USB Keyboard, United States
          • <TABLE ROW>
            • A4983-60101
              • A4983-60101
            • USB Mouse, United States
              • USB Mouse, United States
          • <TABLE ROW>
            • A4986-63008
              • A4986-63008
            • LVD SCSI Terminator
              • LVD SCSI Terminator
          • <TABLE ROW>
            • A1658-63012
              • A1658-63012
            • NSE SCSI Terminator
              • NSE SCSI Terminator
          • <TABLE ROW>
            • A4986-40007
              • A4986-40007
            • PCI Retainer Clip
          • <TABLE ROW>
            • A4986-62003
              • A4986-62003
            • Front Bezel w/ CD Filler (blank)
              • Front Bezel w/ CD Filler (blank)
          • <TABLE ROW>
            • A4986-63002
              • A4986-63002
            • Cable - CD Signal
              • Cable - CD Signal
          • <TABLE ROW>
            • 5182-1857
              • 5182-1857
            • CD Audio Cable
              • CD Audio Cable
          • <TABLE ROW>
            • A4986-63003
              • A4986-63003
            • Cable - Ultra SCSI Signal
              • Cable - Ultra SCSI Signal
          • <TABLE ROW>
            • A4986-63004
              • A4986-63004
            • Cable - Floppy Signal
              • Cable - Floppy Signal
          • <TABLE ROW>
            • A4986-63005
            • Floppy/CD ROM Power Cable
          • <TABLE ROW>
            • A4986-63006
            • LCD Signal Cable
          • <TABLE ROW>
            • A4978-62005
            • SCA Drive Bracket Assembly
          • <TABLE ROW>
            • A4986-62001
            • Main Chassis w/ keys, fans
          • <TABLE ROW>
            • A4986-00026
            • PCI Air Separator (Divider)
          • <TABLE ROW>
            • A4986-00039
            • Fan Bracket- Disk/Memory
          • <TABLE ROW>
            • 0624-0727
              • 0624-0727
            • Screw - 6-32 X 0.437T-15 w/ slot
              • Screw - 6-32 X 0.437T-15 w/ slot
          • <TABLE ROW>
            • A4978-00039
              • A4978-00039
            • 6-32 Thumbscrew
              • 6-32 Thumbscrew
          • <TABLE ROW>
            • 0624-0727
              • 0624-0727
            • Screw -T-15 w/ slot
              • Screw -T-15 w/ slot
          • <TABLE ROW>
            • 1826-4269
            • Real Time Clock Module (internal battery)
  • FRU:removal and replacement,
    • FRU:removal and replacement,
      • FRU:removal and replacement,
    • The procedures in this section describe how to remove field replaceable units (FRUs). Observe any...
      • The procedures in this section describe how to remove field replaceable units (FRUs). Observe any...
    • Before performing these procedures, observe the following precautions:
    • Step 1. Power off the system, the monitor, and any peripheral devices.
      • Step 1. Power off the system, the monitor, and any peripheral devices.
        • Step 1. Power off the system, the monitor, and any peripheral devices.
        • NOTE There is no need to manually shutdown the HP-UX operating system on the workstation before s...
          • NOTE There is no need to manually shutdown the HP-UX operating system on the workstation before s...
        • CAUTION Unplugging the power cord while HP-UX is running can damage the system files. Do
          • CAUTION Unplugging the power cord while HP-UX is running can damage the system files. Do
      • Step 2. Unplug the workstation power cord and the power cord of any peripheral devices from AC wa...
        • Step 2. Unplug the workstation power cord and the power cord of any peripheral devices from AC wa...
      • Step 3. Unplug the system unit power cord from the AC input connector.
        • Step 3. Unplug the system unit power cord from the AC input connector.
      • Step 4. Disconnect any external cables from the connectors on the front and rear of the system unit.
        • Step 4. Disconnect any external cables from the connectors on the front and rear of the system unit.
      • Step 5. Attach a static-grounding wrist strap to your wrist and a location on the system chassis ...
        • Step 5. Attach a static-grounding wrist strap to your wrist and a location on the system chassis ...
      • Step 6. Lay the workstation on a flat stable surface, such as a table top or floor. To protect ag...
        • Step 6. Lay the workstation on a flat stable surface, such as a table top or floor. To protect ag...
        • CAUTION Follow normal ESD, anti-static precautions when handling the workstation or any of its co...
          • CAUTION Follow normal ESD, anti-static precautions when handling the workstation or any of its co...
      • Step 7. If installed, remove any locking device from the security loop on the rear of the system ...
        • Step 7. If installed, remove any locking device from the security loop on the rear of the system ...
    • front panel:
      • front panel:
        • front panel:
      • This section describes how to open and close the workstation front panel.
        • This section describes how to open and close the workstation front panel.
      • Opening the System Unit Front Panel
        • Opening the System Unit Front Panel
        • Perform the following steps to open the system unit.
        • 1. Power off the workstation, and unplug the power cord from the electrical outlet.
          • 1. Power off the workstation, and unplug the power cord from the electrical outlet.
            • 1. Power off the workstation, and unplug the power cord from the electrical outlet.
          • 2. Attach the static-grounding wrist strap by following the instructions on the package. Attach t...
            • 2. Attach the static-grounding wrist strap by following the instructions on the package. Attach t...
          • 3. Unlock the front panel (also known as the front bezel) by pressing in on the two latch buttons...
            • 3. Unlock the front panel (also known as the front bezel) by pressing in on the two latch buttons...
            • Figure45. Opening the Front Bezel
              • Figure45. Opening the Front Bezel
              • <GRAPHIC>
          • 4. Swing the panel clockwise on its left snap hinges until the panel comes free and place the fro...
            • 4. Swing the panel clockwise on its left snap hinges until the panel comes free and place the fro...
      • Closing the System Unit Front Panel
        • Closing the System Unit Front Panel
        • Perform the following steps to close the system unit.
        • 1. Locate the snap hinges on the left side of the front panel, and insert them into the holes loc...
          • 1. Locate the snap hinges on the left side of the front panel, and insert them into the holes loc...
            • 1. Locate the snap hinges on the left side of the front panel, and insert them into the holes loc...
          • 2. Rotate the front panel counterclockwise until you hear the two latch buttons snap in place. Th...
            • 2. Rotate the front panel counterclockwise until you hear the two latch buttons snap in place. Th...
          • 3. Plug in the system unit power cord, and power on the system.
            • 3. Plug in the system unit power cord, and power on the system.
      • Left Side Panel of the System Unit
        • Left Side Panel of the System Unit
        • This section explains how to open and close the left side panel of the system unit. This side pan...
          • This section explains how to open and close the left side panel of the system unit. This side pan...
        • Opening the Left Side Panel of the System Unit
          • Opening the Left Side Panel of the System Unit
          • Perform these steps to open the left side panel.
          • safety interlock switch:warning,
            • safety interlock switch:warning,
              • safety interlock switch:warning,
          • 1. Turn the computer around so the rear is facing you. On the right edge of the computer, there a...
            • 1. Turn the computer around so the rear is facing you. On the right edge of the computer, there a...
              • 1. Turn the computer around so the rear is facing you. On the right edge of the computer, there a...
            • 2. Grasp the back edge of the left side panel and rotate it outward approximately 45 degrees to t...
              • 2. Grasp the back edge of the left side panel and rotate it outward approximately 45 degrees to t...
              • left side panel,
                • left side panel,
                  • left side panel,
                  • safety interlock switch:location,
                • <GRAPHIC>
          • NOTE The EMI gasket, as shown in Figure 4-6, must not be removed from the side panel.
            • NOTE The EMI gasket, as shown in Figure 4-6, must not be removed from the side panel.
      • Closing the Left Side Panel of the System Unit
        • Closing the Left Side Panel of the System Unit
        • Perform these steps to close the left side panel.
        • NOTE Power supply thumbscrews must be fully tightened before closing the left side panel. Failure...
          • NOTE Power supply thumbscrews must be fully tightened before closing the left side panel. Failure...
        • 1. Hold the left side panel so that the hook hinges can be inserted into their hinge slots. See F...
          • 1. Hold the left side panel so that the hook hinges can be inserted into their hinge slots. See F...
            • 1. Hold the left side panel so that the hook hinges can be inserted into their hinge slots. See F...
          • 2. Swing the back edge of the panel toward the system unit’s back edge and press the outside edge...
            • 2. Swing the back edge of the panel toward the system unit’s back edge and press the outside edge...
          • 3. Secure the side panel in place by screwing the top and bottom slotted T-15 Torx thumb screws i...
            • 3. Secure the side panel in place by screwing the top and bottom slotted T-15 Torx thumb screws i...
    • FRU:power supply,
      • FRU:power supply,
        • FRU:power supply,
      • This section will prove important to you as you begin to service the system. For example, you may...
      • WARNING To prevent injury, unplug the workstation power cord from the electrical outlet before se...
        • WARNING To prevent injury, unplug the workstation power cord from the electrical outlet before se...
      • The topics covered in this section are:
      • • Propping up the Power Supply
        • • Propping up the Power Supply
          • • Propping up the Power Supply
        • • Removing the Power Supply
          • • Removing the Power Supply
      • Propping Up the Power Supply
        • Propping Up the Power Supply
        • To prop the power supply up, follow these steps:
        • 1. Lay the system on its side on a cushioned surface to protect against damage to the exterior wo...
          • 1. Lay the system on its side on a cushioned surface to protect against damage to the exterior wo...
          • 2. Open the left side panel of the system unit by following the procedure in the section “Opening...
            • 2. Open the left side panel of the system unit by following the procedure in the section “Opening...
          • 3. Unscrew the two screws on the power supply chassis as shown in
            • 3. Unscrew the two screws on the power supply chassis as shown in
            • Figure47. Unscrewing the Power Supply Captive Screws
              • Figure47. Unscrewing the Power Supply Captive Screws
              • <GRAPHIC>
          • 4. Lift up on the power supply handle. The power supply bail automatically engages once the power...
            • 4. Lift up on the power supply handle. The power supply bail automatically engages once the power...
            • Figure48. Propping Up the Power Supply
              • Figure48. Propping Up the Power Supply
              • <GRAPHIC>
        • Closing the System
          • Closing the System
          • Once you have completed the task you set out to perform, you are ready to close the system. To cl...
            • Once you have completed the task you set out to perform, you are ready to close the system. To cl...
          • 1. Push slightly back on the power supply until you are able to remove the bail from the bail loc...
            • 1. Push slightly back on the power supply until you are able to remove the bail from the bail loc...
              • 1. Push slightly back on the power supply until you are able to remove the bail from the bail loc...
            • 2. Tighten both captive screws in place as seen in
              • 2. Tighten both captive screws in place as seen in
            • 3. Replace the left side panel of the system unit as shown in the section “Closing the Left Side ...
              • 3. Replace the left side panel of the system unit as shown in the section “Closing the Left Side ...
        • Removing the Power Supply
          • Removing the Power Supply
          • To remove the power supply follow these steps:
          • 1. Follow the steps covered in the section “Propping Up the Power Supply.”
            • 1. Follow the steps covered in the section “Propping Up the Power Supply.”
              • 1. Follow the steps covered in the section “Propping Up the Power Supply.”
            • 2. Disconnect both power cables from the system board, the control cable, and the power cable for...
              • 2. Disconnect both power cables from the system board, the control cable, and the power cable for...
              • Figure49. Disconnecting the Power Supply Cables
                • Figure49. Disconnecting the Power Supply Cables
                • <GRAPHIC>
            • 3. Remove the bail from the bail lock. See Figure 4-10.
              • 3. Remove the bail from the bail lock. See Figure 4-10.
            • 4. Grasp the power supply by the handle and slide the spring hinge lever to the right and rotate ...
              • 4. Grasp the power supply by the handle and slide the spring hinge lever to the right and rotate ...
              • Figure410. Removing the Power Supply
                • Figure410. Removing the Power Supply
                • <GRAPHIC>
          • Closing the System
            • Closing the System
            • Once you have completed the task you set out to perform, you are ready to close the system. To cl...
    • FRU:I/O cards,
      • FRU:I/O cards,
        • FRU:I/O cards,
      • The B Class and C Class computer’s PCI assembly has six slots. Slots 5 and 6 are half-size Periph...
      • Figure411. PCI Card Slot Numbering and Capabilities
        • Figure411. PCI Card Slot Numbering and Capabilities
        • <GRAPHIC>
      • NOTE To maintain good graphics performance, you should always use slot 2 (SL2) as the primary gra...
        • NOTE To maintain good graphics performance, you should always use slot 2 (SL2) as the primary gra...
      • The six I/O slots as seen from the back of the computer are labeled from top to bottom starting w...
      • I/O slot:numbering,
        • I/O slot:numbering,
          • I/O slot:numbering,
        • <GRAPHIC>
      • Removing I/O Cards
        • Removing I/O Cards
        • This section assumes that you already have I/O cards loaded in the system unit, and you would lik...
        • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
          • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
            • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
          • 2. Pull evenly in the direction of the arrow on both sides of the I/O card retainer to remove it....
            • 2. Pull evenly in the direction of the arrow on both sides of the I/O card retainer to remove it....
            • Figure413. Removing the I/O Card Retainer
              • Figure413. Removing the I/O Card Retainer
              • <GRAPHIC>
          • 3. Locate the I/O card you want to remove and using a T-15 Torx driver or flat blade screw driver...
            • 3. Locate the I/O card you want to remove and using a T-15 Torx driver or flat blade screw driver...
            • Figure414. Removing the I/O Card
              • Figure414. Removing the I/O Card
              • <GRAPHIC>
          • 4. Pull evenly on the outside edges of the I/O card to remove it.
            • 4. Pull evenly on the outside edges of the I/O card to remove it.
      • Installing I/O Cards
        • Installing I/O Cards
        • To install a new I/O card, do the following:
        • NOTE Slots two and four are the graphics card slots. The primary graphics card slot is slot numbe...
          • NOTE Slots two and four are the graphics card slots. The primary graphics card slot is slot numbe...
        • 1. Open the left side panel of the system unit as explained in the section “Opening the Left Side...
          • 1. Open the left side panel of the system unit as explained in the section “Opening the Left Side...
            • 1. Open the left side panel of the system unit as explained in the section “Opening the Left Side...
          • 2. Locate the appropriate slot for the I/O card that is to be installed. See Figure 4-12.
            • 2. Locate the appropriate slot for the I/O card that is to be installed. See Figure 4-12.
          • 3. Unscrew the T-15 Torx screw from the bulkhead blank of the slot you have chosen. If no blank i...
            • 3. Unscrew the T-15 Torx screw from the bulkhead blank of the slot you have chosen. If no blank i...
          • 4. Pull evenly in the direction of the arrow on both sides of the I/O card retainer to remove it....
            • 4. Pull evenly in the direction of the arrow on both sides of the I/O card retainer to remove it....
          • 5. Insert the I/O card into the slot you have chosen with the bulkhead appropriately positioned. ...
            • 5. Insert the I/O card into the slot you have chosen with the bulkhead appropriately positioned. ...
          • 6. Replace the I/O card retainer by placing the bottom retainer clip in the slot on the air divid...
            • 6. Replace the I/O card retainer by placing the bottom retainer clip in the slot on the air divid...
          • 7. Close the left side panel of the system unit by following the procedure in the section “Closin...
            • 7. Close the left side panel of the system unit by following the procedure in the section “Closin...
    • FRU:fans,
      • FRU:fans,
        • FRU:fans,
      • The B Class and C Class has five fans that are used to cool various areas within the unit. If one...
      • • Removing the fan from the hard disk drive area
        • • Removing the fan from the hard disk drive area
          • • Removing the fan from the hard disk drive area
        • • Removing the fans from the CPU area
          • • Removing the fans from the CPU area
        • • Removing the fan and speaker from the I/O card area.
          • • Removing the fan and speaker from the I/O card area.
      • Figure415. Fan Cooling Areas for the System Unit
        • Figure415. Fan Cooling Areas for the System Unit
        • <GRAPHIC>
      • FRU:hard disk drive fan,
        • FRU:hard disk drive fan,
          • FRU:hard disk drive fan,
        • This section provides the procedure for removing the cooling fan from the back of the hard disk d...
        • • SCA disk interface board
          • • SCA disk interface board
            • • SCA disk interface board
          • • System board
            • • System board
          • • DIMM cards
            • • DIMM cards
        • Here are the steps necessary for removing the fan from the hard disk drive chassis.
        • 1. Remove the system unit’s side panel. See the section “Opening the Left Side Panel of the Syste...
          • 1. Remove the system unit’s side panel. See the section “Opening the Left Side Panel of the Syste...
            • 1. Remove the system unit’s side panel. See the section “Opening the Left Side Panel of the Syste...
          • 2. Lay the system unit on its right side (determined by facing the workstation front panel), and ...
            • 2. Lay the system unit on its right side (determined by facing the workstation front panel), and ...
          • 3. Unplug the fan power cable from the system board. If you are removing the hard disk drive fan ...
            • 3. Unplug the fan power cable from the system board. If you are removing the hard disk drive fan ...
          • 4. Lift up on the handle of the fan bracket to remove the fan. See Figure 4-16. As you lift up on...
            • 4. Lift up on the handle of the fan bracket to remove the fan. See Figure 4-16. As you lift up on...
            • Figure416. Removing the Fan from the Hard Disk Drive Chassis
              • Figure416. Removing the Fan from the Hard Disk Drive Chassis
              • <GRAPHIC>
      • FRU:system fans,
        • FRU:system fans,
          • FRU:system fans,
        • This section provides the procedure for removing the cooling fans from the CPU area of the system...
        • Here are the steps necessary for removing the fans from the CPU area of the system unit’s chassis.
        • 1. Remove the system units left side panel. See the section “Opening the Left Side Panel of the S...
          • 1. Remove the system units left side panel. See the section “Opening the Left Side Panel of the S...
            • 1. Remove the system units left side panel. See the section “Opening the Left Side Panel of the S...
          • 2. Lay the system unit on its right side (determined by facing the system units front panel), and...
            • 2. Lay the system unit on its right side (determined by facing the system units front panel), and...
          • 3. Unplug the power cables for the fans as shown in
            • 3. Unplug the power cables for the fans as shown in
            • Figure417. Removing the Fan Rivets
              • Figure417. Removing the Fan Rivets
              • <GRAPHIC>
          • 4. Remove the plastic mounting rivets that hold the fans in place. See Figure 4-17. To remove the...
            • 4. Remove the plastic mounting rivets that hold the fans in place. See Figure 4-17. To remove the...
            • Figure418. Removing CPU Area Fans
              • Figure418. Removing CPU Area Fans
              • <GRAPHIC>
        • Note that you can replace the fans using the original rivets; however, the plastic rivets will be...
      • Installing the Fans for the CPU Area
        • Installing the Fans for the CPU Area
        • To replace the system board fans, do the following:
        • Installing the Bottom Fan
          • Installing the Bottom Fan
          • 1. Position the bottom fan so its power cable channel is against the system unit chassis, and the...
            • 1. Position the bottom fan so its power cable channel is against the system unit chassis, and the...
              • 1. Position the bottom fan so its power cable channel is against the system unit chassis, and the...
            • 2. Slide the lower left corner of the fan into the fan support. See
              • 2. Slide the lower left corner of the fan into the fan support. See
            • 3. Line up the rivet holes of the fan with the rivet holes of the system unit chassis.
              • 3. Line up the rivet holes of the fan with the rivet holes of the system unit chassis.
            • 4. Press the plastic rivets into place. See
              • 4. Press the plastic rivets into place. See
            • 5. Plug the fan power cable into its connector on the system board. See
              • 5. Plug the fan power cable into its connector on the system board. See
        • Installing the Top Fan
          • Installing the Top Fan
          • 1. Position the top fan so its power cable channel is up against the workstation chassis, and the...
            • 1. Position the top fan so its power cable channel is up against the workstation chassis, and the...
              • 1. Position the top fan so its power cable channel is up against the workstation chassis, and the...
            • 2. Line up the rivet holes of the fan with the rivet holes of the system unit chassis.
              • 2. Line up the rivet holes of the fan with the rivet holes of the system unit chassis.
            • 3. Press the plastic rivets into place. See
              • 3. Press the plastic rivets into place. See
            • 4. Plug the fan power cable into its connector on the system board. See
              • 4. Plug the fan power cable into its connector on the system board. See
      • FRU:I/O fan,
        • FRU:I/O fan,
          • FRU:I/O fan,
        • The I/O area of the system unit has its own cooling fan. Note that there is a speaker attached to...
        • To remove the I/O cooling fan or
        • 1. Remove the workstation left side panel. See the section “Opening the Left Side Panel of the Sy...
          • 1. Remove the workstation left side panel. See the section “Opening the Left Side Panel of the Sy...
            • 1. Remove the workstation left side panel. See the section “Opening the Left Side Panel of the Sy...
          • 2. Lay the workstation on its side, and remove all of the I/O cards. See the section “Removing I/...
            • 2. Lay the workstation on its side, and remove all of the I/O cards. See the section “Removing I/...
          • 3. Remove the system unit air divider as shown in Figure 4-19 by unscrewing the two T-15 Torx scr...
            • 3. Remove the system unit air divider as shown in Figure 4-19 by unscrewing the two T-15 Torx scr...
            • Figure419. Removing the System Unit Air Divider
              • Figure419. Removing the System Unit Air Divider
              • <GRAPHIC>
          • 4. Remove the fan and speaker cables from the system board and lift up on the bracket mounting cl...
            • 4. Remove the fan and speaker cables from the system board and lift up on the bracket mounting cl...
            • Figure420. Removing the Fan and Speaker from the I/O Area
              • Figure420. Removing the Fan and Speaker from the I/O Area
              • <GRAPHIC>
          • 5. To remove the speaker from the mounting bracket, push a finger through the access hole and spr...
          • 6. Remove the fan from the bracket by slightly pulling the left and right fan mounting clips away...
            • 6. Remove the fan from the bracket by slightly pulling the left and right fan mounting clips away...
      • Installing a Fan or Speaker in the I/O Card Area
        • Installing a Fan or Speaker in the I/O Card Area
        • If you are replacing a fan or speaker in the I/O card area, follow the steps covered in this sect...
        • 1. Remove the fan or speaker from the I/O card area by following the procedure in the section “Re...
          • 1. Remove the fan or speaker from the I/O card area by following the procedure in the section “Re...
            • 1. Remove the fan or speaker from the I/O card area by following the procedure in the section “Re...
          • 2. Install the fan by positioning the fan power cable channel so that it is located in the lower ...
            • 2. Install the fan by positioning the fan power cable channel so that it is located in the lower ...
          • 3. Install the speaker by positioning it so that the speaker cable can be easily run out of the h...
            • 3. Install the speaker by positioning it so that the speaker cable can be easily run out of the h...
          • 4. Replace the fan/speaker bracket in the chassis by inserting the bottom and in first between th...
            • 4. Replace the fan/speaker bracket in the chassis by inserting the bottom and in first between th...
          • 5. Position the fan power cable, speaker cable and LCD ribbon cable so that they run along the sy...
            • 5. Position the fan power cable, speaker cable and LCD ribbon cable so that they run along the sy...
          • 6. Place the air divider into its proper position as shown in
            • 6. Place the air divider into its proper position as shown in
          • 7. Replace all I/O cards into their proper slots as explained in the section “I/O Cards” in this ...
            • 7. Replace all I/O cards into their proper slots as explained in the section “I/O Cards” in this ...
          • 8. Close the system unit as discussed in the section “Closing the System Unit” in this chapter.
            • 8. Close the system unit as discussed in the section “Closing the System Unit” in this chapter.
    • FRU:removable media,
      • FRU:removable media,
        • FRU:removable media,
      • There are only two removable media devices allowed in a B Class and C Class computer:
      • • CD Drive
        • • CD Drive
          • • CD Drive
        • • 3.5-inch floppy disk drive.
          • • 3.5-inch floppy disk drive.
      • The procedures provided in the subsequent sections explain how to install and remove media devices.
      • FRU:CD drive,
        • FRU:CD drive,
          • FRU:CD drive,
        • Install the CD drive by following the procedure covered in this section.
        • WARNING Turn the workstation off and unplug the power cord before installing the CD drive.
          • WARNING Turn the workstation off and unplug the power cord before installing the CD drive.
        • Note you will have to verify that the master/slave/CSEL jumper is set in the CSEL position. Since...
        • CAUTION CD drives are susceptible to mechanical and electronic shock. When handling the drive, al...
          • CAUTION CD drives are susceptible to mechanical and electronic shock. When handling the drive, al...
        • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
          • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
            • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
          • 2. Remove the CD Drive rear cover by unscrewing the T-15 Torx screw as shown in Figure 4-22. Note...
            • 2. Remove the CD Drive rear cover by unscrewing the T-15 Torx screw as shown in Figure 4-22. Note...
            • Figure422. Removing the CD Drive Rear Cover
              • Figure422. Removing the CD Drive Rear Cover
              • <GRAPHIC>
          • 3. Rotate the system unit around until you see the front of the unit as shown in
            • 3. Rotate the system unit around until you see the front of the unit as shown in
            • Figure423. Front of System Unit with the Front Panel Removed
              • Figure423. Front of System Unit with the Front Panel Removed
              • <GRAPHIC>
          • 4. Remove both CD Drive bracket screws (T-15 Torx screws) and pull the CD Drive bracket out of th...
            • 4. Remove both CD Drive bracket screws (T-15 Torx screws) and pull the CD Drive bracket out of th...
            • Figure424. Removing the CD Drive Bracket and Blank
              • Figure424. Removing the CD Drive Bracket and Blank
              • <GRAPHIC>
          • 5. Read the CAUTION statement at the beginning of this section. Next remove the CD Drive from its...
            • 5. Read the CAUTION statement at the beginning of this section. Next remove the CD Drive from its...
            • Figure425. Installing the CD Drive
              • Figure425. Installing the CD Drive
              • <GRAPHIC>
          • 6. Slide the CD Drive and its bracket into the system unit chassis as shown in Figure 4-25. There...
            • 6. Slide the CD Drive and its bracket into the system unit chassis as shown in Figure 4-25. There...
          • 7. Tighten the two CD Drive bracket screws as shown in Figure 4-26.
            • 7. Tighten the two CD Drive bracket screws as shown in Figure 4-26.
            • Figure426. Tightening the Bracket Screws
              • Figure426. Tightening the Bracket Screws
              • <GRAPHIC>
          • 8. Plug the ATAPI and power cables into their appropriate connectors. Note that the connectors ar...
            • 8. Plug the ATAPI and power cables into their appropriate connectors. Note that the connectors ar...
            • Figure427. Plugging in the ATAPI and Power Cables
              • Figure427. Plugging in the ATAPI and Power Cables
              • <GRAPHIC>
          • 9. Make sure that the ATAPI and power cables are positioned so that they come out of the bottom e...
            • 9. Make sure that the ATAPI and power cables are positioned so that they come out of the bottom e...
            • Figure428. Replacing the Rear EMI CD Drive Cover
              • Figure428. Replacing the Rear EMI CD Drive Cover
              • <GRAPHIC>
          • 10. Complete the installation of the CD Drive by replacing the front and side panels of the syste...
            • 10. Complete the installation of the CD Drive by replacing the front and side panels of the syste...
      • Removing a CD Drive
        • Removing a CD Drive
        • This section explains how to remove a CD Drive from you system unit.
        • CAUTION CD Drives are susceptible to mechanical and electronic shock. When handling the drive, al...
          • CAUTION CD Drives are susceptible to mechanical and electronic shock. When handling the drive, al...
        • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
          • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
            • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
          • 2. Remove the CD Drive rear disk cover by unscrewing the T-15 Torx screw as shown in
            • 2. Remove the CD Drive rear disk cover by unscrewing the T-15 Torx screw as shown in
            • Figure429. Removing the CD Drive’s Rear Cover
              • Figure429. Removing the CD Drive’s Rear Cover
              • <GRAPHIC>
          • 3. Rotate the system unit around until you see the front of the unit as shown in Figure 4-30.
            • 3. Rotate the system unit around until you see the front of the unit as shown in Figure 4-30.
            • Figure430. Front of the System Unit with the Front Panel Removed
              • Figure430. Front of the System Unit with the Front Panel Removed
              • <GRAPHIC>
          • 4. Remove both CD Drive bracket screws (T-15 Torx screws) and pull the CD Drive out of the chassi...
            • 4. Remove both CD Drive bracket screws (T-15 Torx screws) and pull the CD Drive out of the chassi...
            • Figure431. Removing the CD Drive
              • Figure431. Removing the CD Drive
              • <GRAPHIC>
          • 5. Insert the CD Drive blank in the CD Drive bracket and tighten the four CD Drive mounting screw...
            • 5. Insert the CD Drive blank in the CD Drive bracket and tighten the four CD Drive mounting screw...
            • Figure432. Installing the CD Drive Blank
              • Figure432. Installing the CD Drive Blank
              • <GRAPHIC>
          • 6. Tighten the two CD Drive bracket screws as shown in Figure 4-33.
            • 6. Tighten the two CD Drive bracket screws as shown in Figure 4-33.
            • Figure433. Tightening the Bracket Screws
              • Figure433. Tightening the Bracket Screws
              • <GRAPHIC>
          • 7. Place the ATAPI cable and power cables inside the CD Drive chassis, and position the cables so...
            • 7. Place the ATAPI cable and power cables inside the CD Drive chassis, and position the cables so...
            • Figure434. Replacing the CD Drive Rear Cover
              • Figure434. Replacing the CD Drive Rear Cover
              • <GRAPHIC>
      • FRU:floppy disk drive,
        • FRU:floppy disk drive,
          • FRU:floppy disk drive,
        • Install the floppy disk drive by following the procedure covered in this section. Note there are ...
        • WARNING Turn the workstation off and unplug the power cord before installing the floppy disk drive.
          • WARNING Turn the workstation off and unplug the power cord before installing the floppy disk drive.
        • CAUTION Floppy disk drives are susceptible to mechanical and electronic shock. When handling the ...
          • CAUTION Floppy disk drives are susceptible to mechanical and electronic shock. When handling the ...
        • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
          • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
            • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
          • 2. Remove the floppy rear-disk cover by unscrewing the T-15 Torx screw as shown in
            • 2. Remove the floppy rear-disk cover by unscrewing the T-15 Torx screw as shown in
            • Figure435. Removing the Floppy Disk’s Rear Cover
              • Figure435. Removing the Floppy Disk’s Rear Cover
              • <GRAPHIC>
          • 3. Rotate the system unit around until you see the front of the workstation as shown in
            • 3. Rotate the system unit around until you see the front of the workstation as shown in
            • Figure436. Front of Workstation with the Front Panel Removed
              • Figure436. Front of Workstation with the Front Panel Removed
              • <GRAPHIC>
          • 4. Remove both floppy disk bracket screws (T-15 Torx screws) and pull the floppy disk bracket out...
            • 4. Remove both floppy disk bracket screws (T-15 Torx screws) and pull the floppy disk bracket out...
            • Figure437. Removing the Floppy Disk Bracket and Blank
              • Figure437. Removing the Floppy Disk Bracket and Blank
              • <GRAPHIC>
          • 5. Read the CAUTION statement at the beginning of this section. Next remove the floppy disk drive...
            • 5. Read the CAUTION statement at the beginning of this section. Next remove the floppy disk drive...
            • Figure438. Installing the Floppy Disk Drive
              • Figure438. Installing the Floppy Disk Drive
              • <GRAPHIC>
          • 6. Slide the floppy disk and its bracket into the system unit chassis as shown in
            • 6. Slide the floppy disk and its bracket into the system unit chassis as shown in
          • 7. Tighten the two floppy bracket screws as shown in
            • 7. Tighten the two floppy bracket screws as shown in
            • Figure439. Tightening the Bracket Screws
              • Figure439. Tightening the Bracket Screws
              • <GRAPHIC>
          • 8. Plug the data and power cables into their appropriate connectors. Note that the connectors are...
            • 8. Plug the data and power cables into their appropriate connectors. Note that the connectors are...
            • Figure440. Plugging in the Data and Power Cables
              • Figure440. Plugging in the Data and Power Cables
              • <GRAPHIC>
          • 9. Verify that the data and power cables are positioned to come out of the top edge of the rear f...
            • 9. Verify that the data and power cables are positioned to come out of the top edge of the rear f...
            • Figure441. Replacing the Rear Floppy Cover
              • Figure441. Replacing the Rear Floppy Cover
              • <GRAPHIC>
          • 10. Complete the installation of the floppy disk drive by replacing the front and side panels of ...
            • 10. Complete the installation of the floppy disk drive by replacing the front and side panels of ...
      • Removing a Floppy Disk Drive
        • Removing a Floppy Disk Drive
        • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
          • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
            • 1. Perform the procedures in the sections “Opening the System Unit Front Panel” and “Opening the ...
          • 2. Remove the floppy rear disk cover by unscrewing the T-15 Torx screw as shown in
            • 2. Remove the floppy rear disk cover by unscrewing the T-15 Torx screw as shown in
            • Figure442. Removing the Floppy Disk’s Rear Cover
              • Figure442. Removing the Floppy Disk’s Rear Cover
              • <GRAPHIC>
          • 3. Rotate the workstation around until you can see the front of the unit as shown in
            • 3. Rotate the workstation around until you can see the front of the unit as shown in
            • Figure443. Front of Workstation with the Front Panel Removed
              • Figure443. Front of Workstation with the Front Panel Removed
              • <GRAPHIC>
          • 4. Remove both floppy disk bracket screws (T-15 torx screws) and pull the floppy disk drive out o...
            • 4. Remove both floppy disk bracket screws (T-15 torx screws) and pull the floppy disk drive out o...
            • Figure444. Removing the Floppy Disk Drive
              • Figure444. Removing the Floppy Disk Drive
              • <GRAPHIC>
          • 5. Place the floppy disk blank in the floppy disk bracket and insert the four floppy disk mountin...
            • 5. Place the floppy disk blank in the floppy disk bracket and insert the four floppy disk mountin...
            • Figure445. Installing the Floppy Disk Blank and Bracket
              • Figure445. Installing the Floppy Disk Blank and Bracket
              • <GRAPHIC>
          • 6. Slide the floppy disk blank and its bracket into the system unit chassis as shown in
            • 6. Slide the floppy disk blank and its bracket into the system unit chassis as shown in
          • 7. Tighten the two floppy disk bracket screws as shown in
            • 7. Tighten the two floppy disk bracket screws as shown in
            • Figure446. Tightening the Bracket Screws
              • Figure446. Tightening the Bracket Screws
              • <GRAPHIC>
          • 8. Inspect and verify that the data and power cables are positioned to come out of the top edge o...
            • 8. Inspect and verify that the data and power cables are positioned to come out of the top edge o...
            • Figure447. Replacing the Rear Floppy Cover
              • Figure447. Replacing the Rear Floppy Cover
              • <GRAPHIC>
          • 9. Complete the installation of the floppy disk drive by replacing the front and side panels of t...
            • 9. Complete the installation of the floppy disk drive by replacing the front and side panels of t...
    • FRU:hard disk drive,
      • FRU:hard disk drive,
        • FRU:hard disk drive,
      • This section describes installation and removal of hard disk drives in the B Class and C Class wo...
      • NOTE Do not use SCSI ID 7 for any of the internal or external disk drives. The host SCSI controll...
        • NOTE Do not use SCSI ID 7 for any of the internal or external disk drives. The host SCSI controll...
      • hard disk drive:
        • hard disk drive:
          • hard disk drive:
        • NOTE If you are installing a new hard disk drive, the slotted pan screws for attaching the drive ...
          • NOTE If you are installing a new hard disk drive, the slotted pan screws for attaching the drive ...
        • 1. Open the front panel of the workstation, refer to the section “Opening the System Unit Front P...
          • 1. Open the front panel of the workstation, refer to the section “Opening the System Unit Front P...
            • 1. Open the front panel of the workstation, refer to the section “Opening the System Unit Front P...
            • Figure448. The Hard Drive Slots
              • Figure448. The Hard Drive Slots
              • <GRAPHIC>
          • 2. Open the hard drive slot by pressing the plastic release hook upward and pulling outward on th...
            • 2. Open the hard drive slot by pressing the plastic release hook upward and pulling outward on th...
            • Figure449. Removing the Hard Drive Bracket
              • Figure449. Removing the Hard Drive Bracket
              • <GRAPHIC>
          • 3. Mount the hard disk drive on the hard drive bracket using the four T-10 torx screws and rubber...
            • 3. Mount the hard disk drive on the hard drive bracket using the four T-10 torx screws and rubber...
            • NOTE If you are installing a hard disk drive, you will need to mount it and create a file system ...
              • NOTE If you are installing a hard disk drive, you will need to mount it and create a file system ...
              • To mount a hard disk drive and create a file system on it use the procedure in the section “Addin...
            • Figure450. Inserting the Hard Disk Drive
              • Figure450. Inserting the Hard Disk Drive
              • <GRAPHIC>
      • Removing a Hard Disk Drive
        • Removing a Hard Disk Drive
        • This procedure explains how to remove the hard disk drive. Note that there are no cables for you ...
        • 1. Open the front panel of the system using the instructions found in the section “Opening the Sy...
          • 1. Open the front panel of the system using the instructions found in the section “Opening the Sy...
            • 1. Open the front panel of the system using the instructions found in the section “Opening the Sy...
            • Figure451. The Hard Drive Slots
              • Figure451. The Hard Drive Slots
              • <GRAPHIC>
          • 2. Open the hard drive slot by pressing the plastic release hook upward and pulling outward on th...
            • 2. Open the hard drive slot by pressing the plastic release hook upward and pulling outward on th...
            • Figure452. Removing the Hard Disk Drive
              • Figure452. Removing the Hard Disk Drive
              • <GRAPHIC>
          • 3. Remove the four T-15 Torx screws from the hard disk drive bracket. See
            • 3. Remove the four T-15 Torx screws from the hard disk drive bracket. See
            • Figure453. Removing the Hard Disk Drive from the Bracket
              • Figure453. Removing the Hard Disk Drive from the Bracket
              • <GRAPHIC>
          • 4. Slide the assembly into its hard drive slot, and push inward on the release lever until the fr...
            • 4. Slide the assembly into its hard drive slot, and push inward on the release lever until the fr...
            • Figure454. Replacing the Hard Disk Drive Bracket
              • Figure454. Replacing the Hard Disk Drive Bracket
              • <GRAPHIC>
    • FRU:DIMM cards,
      • FRU:DIMM cards,
        • FRU:DIMM cards,
      • This section contains information regarding the installation and removal of memory (DIMM cards). ...
      • • Use the procedure described in
        • • Use the procedure described in
          • • Use the procedure described in
        • • Review the steps involved in installing memory DIMMs before you begin.
          • • Review the steps involved in installing memory DIMMs before you begin.
        • • Insert DIMMs in the order shown. Please refer to
          • • Insert DIMMs in the order shown. Please refer to
        • • Note the proper orientation for DIMMs when inserting them into their connectors because the con...
          • • Note the proper orientation for DIMMs when inserting them into their connectors because the con...
        • • Use the “Boot Console Handler” to verify that the computer recognizes the additional DIMMs when...
          • • Use the “Boot Console Handler” to verify that the computer recognizes the additional DIMMs when...
      • Installing Additional Memory
        • Installing Additional Memory
        • Perform the following steps to add memory (DIMM cards) to the workstation.
        • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
          • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
            • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
          • 2. Lay the system on its side as shown in
            • 2. Lay the system on its side as shown in
            • Figure455. Propping Up the Power Supply
              • Figure455. Propping Up the Power Supply
              • <GRAPHIC>
          • 3. Prop up the system unit power supply as explained in the section “Propping Up the System Unit ...
            • 3. Prop up the system unit power supply as explained in the section “Propping Up the System Unit ...
          • 4. For ease in installation of additional memory the hard disk drive fan may need to be removed. ...
            • 4. For ease in installation of additional memory the hard disk drive fan may need to be removed. ...
          • 5. Load the DIMM cards in the slots using the loading sequence provided in
            • 5. Load the DIMM cards in the slots using the loading sequence provided in
            • DIMM:card slot numbering,
              • DIMM:card slot numbering,
                • DIMM:card slot numbering,
              • <GRAPHIC>
            • NOTE When installing DIMMs, you need to orient the notches on the bottom edge of the DIMM card so...
              • NOTE When installing DIMMs, you need to orient the notches on the bottom edge of the DIMM card so...
          • 6. Press downward on the ejector tabs located on both sides of the DIMM connector. See
            • 6. Press downward on the ejector tabs located on both sides of the DIMM connector. See
            • Figure457. Installing Memory Cards
              • Figure457. Installing Memory Cards
              • <GRAPHIC>
          • 7. Place the DIMM card in the connector, lining it up with the guides. Make sure to put the notch...
            • 7. Place the DIMM card in the connector, lining it up with the guides. Make sure to put the notch...
          • 8. Close the ejector tab.
            • 8. Close the ejector tab.
          • 9. Press firmly and evenly on the DIMM card to ensure that it seats properly. The ejector tabs en...
            • 9. Press firmly and evenly on the DIMM card to ensure that it seats properly. The ejector tabs en...
          • 10. Replace the power supply and workstation left side panel. You may now plug the power cord bac...
            • 10. Replace the power supply and workstation left side panel. You may now plug the power cord bac...
          • 11. Verify that this installation was successful by following the steps in Chapter 6, “The Boot C...
            • 11. Verify that this installation was successful by following the steps in Chapter 6, “The Boot C...
        • Once you have completed the steps listed above, the DIMM cards are properly loaded.
      • FRU:memory:removing,
        • FRU:memory:removing,
          • FRU:memory:removing,
        • Perform the following steps to remove memory (DIMM cards) from the system unit.
        • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
          • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
            • 1. Open the side panel of the system unit as explained in the section “Opening the Left Side Pane...
          • 2. Lay the system on its side as shown in
            • 2. Lay the system on its side as shown in
            • Figure458. Propping Up the Power Supply
              • Figure458. Propping Up the Power Supply
              • <GRAPHIC>
          • 3. Prop up the system unit power supply as explained in the section “Propping Up the System Unit ...
            • 3. Prop up the system unit power supply as explained in the section “Propping Up the System Unit ...
          • 4. For ease in removing memory cards, remove the fan from the hard disk drive chassis. See the se...
            • 4. For ease in removing memory cards, remove the fan from the hard disk drive chassis. See the se...
          • 5. Press downward on the ejector tabs located on both sides of the DIMM connector. See
            • 5. Press downward on the ejector tabs located on both sides of the DIMM connector. See
            • Figure459. Removing Memory Cards
              • Figure459. Removing Memory Cards
              • <GRAPHIC>
          • 6. Lift up evenly on the outside edges of the DIMM card. See
            • 6. Lift up evenly on the outside edges of the DIMM card. See
          • 7. Replace the power supply and system unit side panel. You may now plug the power cord back into...
            • 7. Replace the power supply and system unit side panel. You may now plug the power cord back into...
          • 8. Verify that the removal was successful by following the steps in Chapter 6, “Boot Console Hand...
            • 8. Verify that the removal was successful by following the steps in Chapter 6, “Boot Console Hand...
    • FRU:LCD,
      • FRU:LCD,
        • FRU:LCD,
      • This section describes how to remove and replace the B Class and C Class workstation power switch...
      • Removing the System Unit LCD
        • Removing the System Unit LCD
        • To remove the LCD assembly, perform the following steps:
        • 1. Open the system unit’s front panel as shown in the section “Opening the System Unit Front Panel.”
          • 1. Open the system unit’s front panel as shown in the section “Opening the System Unit Front Panel.”
            • 1. Open the system unit’s front panel as shown in the section “Opening the System Unit Front Panel.”
          • 2. Unplug the LCD’s connector as shown in Figure 4-60.
            • 2. Unplug the LCD’s connector as shown in Figure 4-60.
            • Figure460. Removing the System Unit LCD
              • Figure460. Removing the System Unit LCD
              • <GRAPHIC>
          • 3. Press inward on the mount clip located on the right side of the LCD mount and pull the right s...
            • 3. Press inward on the mount clip located on the right side of the LCD mount and pull the right s...
      • Replacing the
        • Replacing the
        • To replace the power switch/LCD assembly, do the following:
        • 1. Open the system unit’s front panel as shown in the section “Opening the System Unit Front Panel.”
          • 1. Open the system unit’s front panel as shown in the section “Opening the System Unit Front Panel.”
            • 1. Open the system unit’s front panel as shown in the section “Opening the System Unit Front Panel.”
          • 2. Insert the LCD’s left-side mounting clips into the slots shown on the system unit chassis. See
            • 2. Insert the LCD’s left-side mounting clips into the slots shown on the system unit chassis. See
          • 3. Plug in the LCD connector as shown in Figure 4-60.
            • 3. Plug in the LCD connector as shown in Figure 4-60.
          • 4. Replace the system unit’s front panel. This completes the installation of the system LCD assem...
            • 4. Replace the system unit’s front panel. This completes the installation of the system LCD assem...
    • FRU:system board,
      • FRU:system board,
        • FRU:system board,
      • The system board contains the I/O section, computer main memory, CPU, and all of the circuitry an...
      • Removing the
        • Removing the
        • To remove the system board tray assembly, do the following:
        • 1. Remove the left side panel as explained in the section “Opening the Left Side Panel of the Sys...
          • 1. Remove the left side panel as explained in the section “Opening the Left Side Panel of the Sys...
            • 1. Remove the left side panel as explained in the section “Opening the Left Side Panel of the Sys...
            • NOTE Remove the terminators on the rear panel of the workstation.
              • NOTE Remove the terminators on the rear panel of the workstation.
          • 2. Remove the two T-15 Torx screws that secure the system board tray assembly to the rear panel o...
            • 2. Remove the two T-15 Torx screws that secure the system board tray assembly to the rear panel o...
          • 3. Remove the system unit power supply as covered in the section “System Unit Power Supply” in th...
            • 3. Remove the system unit power supply as covered in the section “System Unit Power Supply” in th...
          • 4. Remove the hard disk drive fan as described in the section “Removing the Fan from the Hard Dis...
            • 4. Remove the hard disk drive fan as described in the section “Removing the Fan from the Hard Dis...
          • 5. Remove the DIMM cards as explained in the section “Removing Memory” in this chapter.
            • 5. Remove the DIMM cards as explained in the section “Removing Memory” in this chapter.
          • 6. Remove the PCI retainer, the I/O cards from their PCI slots and the air divider as covered ear...
            • 6. Remove the PCI retainer, the I/O cards from their PCI slots and the air divider as covered ear...
          • 7. Unplug the following cables from the system board:
            • 7. Unplug the following cables from the system board:
            • a. Floppy disk drive data cable
              • a. Floppy disk drive data cable
              • b. CD drive data cable
                • b. CD drive data cable
              • c. Hard disk drive fan cable
                • c. Hard disk drive fan cable
              • d. Fan/Speaker cables
                • d. Fan/Speaker cables
              • e. LCD ribbon cable
                • e. LCD ribbon cable
              • f. CD drive audio cable
                • f. CD drive audio cable
              • g. System board fan cables (2)
                • g. System board fan cables (2)
              • h. Ultra2 Wide LVD SCSI cable
                • h. Ultra2 Wide LVD SCSI cable
            • Figure461. Removing the System Board
              • Figure461. Removing the System Board
              • <GRAPHIC>
          • 8. Fold back the workstation cables to avoid interference or damage.
            • 8. Fold back the workstation cables to avoid interference or damage.
          • 9. Grasp the system board tray handle and slide the system board to the front of the workstation....
            • 9. Grasp the system board tray handle and slide the system board to the front of the workstation....
      • FRU:system board:installation,
        • FRU:system board:installation,
          • FRU:system board:installation,
        • To install the system board perform the following steps:
        • 1. Angle the system board assembly diagonally as you begin installation. Position the system boar...
          • 1. Angle the system board assembly diagonally as you begin installation. Position the system boar...
            • 1. Angle the system board assembly diagonally as you begin installation. Position the system boar...
            • Figure462. Installing the System Board
              • Figure462. Installing the System Board
              • <GRAPHIC>
          • 2. Re-attach the cables described in step 7 of
            • 2. Re-attach the cables described in step 7 of
          • 3. Replace the following components:
            • 3. Replace the following components:
            • a. Power supply
              • a. Power supply
                • a. Power supply
              • b. DIMM cards
                • b. DIMM cards
              • c. Hard disk drive fan
                • c. Hard disk drive fan
              • d. PCI air divider
                • d. PCI air divider
              • e. PCI cards
                • e. PCI cards
              • f. PCI retainer
                • f. PCI retainer
          • 4. Replace the left side panel as explained in the section “Opening the Left Side Panel of the Sy...
            • 4. Replace the left side panel as explained in the section “Opening the Left Side Panel of the Sy...
    • FRU:battery,
      • FRU:battery,
        • FRU:battery,
      • The battery in the B Class and C Class workstation is contained within the real time clock module...
        • The battery in the B Class and C Class workstation is contained within the real time clock module...
      • 1. Close all open applications on the workstation then use the power button on the front panel to...
        • 1. Close all open applications on the workstation then use the power button on the front panel to...
          • 1. Close all open applications on the workstation then use the power button on the front panel to...
        • 2. Unplug the power cord from the workstation to disconnect all AC power. Remove the workstation ...
          • 2. Unplug the power cord from the workstation to disconnect all AC power. Remove the workstation ...
        • 3. Remove the two captive screws for the power supply shown in
        • 4. Carefully remove the defective real time clock module. Note the polarity dot which is silk-scr...
          • 4. Carefully remove the defective real time clock module. Note the polarity dot which is silk-scr...
          • CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equ...
            • CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equ...
          • CAUTION Il y a danger d´explosion s´il y a remplacement incorrect de la batterie. Remplacer uniqu...
            • CAUTION Il y a danger d´explosion s´il y a remplacement incorrect de la batterie. Remplacer uniqu...
        • 5. Insert the
          • 5. Insert the
        • 6. Reconnect the 6-pin power supply cable to the system board. Push back slightly on the power su...
          • 6. Reconnect the 6-pin power supply cable to the system board. Push back slightly on the power su...
        • 7. Replace the left side panel of the system unit as shown in the section “Closing the left Side ...
          • 7. Replace the left side panel of the system unit as shown in the section “Closing the left Side ...
          • Carefully inspect the seating of the left side panel in the mainframe chassis to assure that the
          • Apply AC power to the workstation and cycle the power button to the on position.
        • 8. The B Class and C Class workstation is now ready to reboot with the operational battery.
• Diagrams:
  • Diagrams:
    • Diagrams:
  • This chapter provides functional information about the B Class and C Class workstations. The foll...
    • This chapter provides functional information about the B Class and C Class workstations. The foll...
  • Diagrams:system power,
    • Diagrams:system power,
      • Diagrams:system power,
    • Figure 5–1 shows the system power distribution.
      • Figure 5–1 shows the system power distribution.
    • Figure51. Power Distribution Diagram
      • Figure51. Power Distribution Diagram
      • <GRAPHIC>
    • Figure 5–2 shows the system unit block diagram.
    • Diagrams:functional block,
      • Diagrams:functional block,
        • Diagrams:functional block,
      • <GRAPHIC>
• 6 Boot Console Handler
  • 6 Boot Console Handler
  • This chapter explains how to use the Boot Console Handler, which provides an interactive environm...
    • This chapter explains how to use the Boot Console Handler, which provides an interactive environm...
  • Here are the topics covered in this chapter:
  • • Boot Console Handler Features
    • • Boot Console Handler Features
      • • Boot Console Handler Features
    • • Accessing the Boot Console Handler
      • • Accessing the Boot Console Handler
    • • Booting the Workstation
      • • Booting the Workstation
    • • Searching for Bootable Media
      • • Searching for Bootable Media
    • • Resetting the Workstation
      • • Resetting the Workstation
    • • Displaying and Setting Paths
      • • Displaying and Setting Paths
    • • Displaying and Setting the Monitor type
      • • Displaying and Setting the Monitor type
    • • Changing the Console to an External Terminal
      • • Changing the Console to an External Terminal
    • • Displaying the Current Memory Configuration
      • • Displaying the Current Memory Configuration
    • • Display the Status of the System I/O
      • • Display the Status of the System I/O
    • • Setting the Auto Boot and Auto Search
      • • Setting the Auto Boot and Auto Search
    • • Displaying and Setting the Security Mode
      • • Displaying and Setting the Security Mode
    • • Displaying and setting the Fastboot
      • • Displaying and setting the Fastboot
    • • Displaying the LAN station address
      • • Displaying the LAN station address
    • • Displaying System Information
      • • Displaying System Information
    • • Displaying PIM information
      • • Displaying PIM information
  • Boot Console Handler:features,
    • Boot Console Handler:features,
      • Boot Console Handler:features,
    • There are times when you want to interact directly with the hardware of your computer before it b...
      • There are times when you want to interact directly with the hardware of your computer before it b...
    • Here are some of the things you can do:
    • • Boot your computer
      • • Boot your computer
        • • Boot your computer
      • • Search for bootable media
        • • Search for bootable media
      • • Reset your computer
        • • Reset your computer
      • • Display and set boot paths
        • • Display and set boot paths
      • • Display and set your monitor type
        • • Display and set your monitor type
      • • Display memory configuration information
        • • Display memory configuration information
      • • Display the status of the PCI slots
        • • Display the status of the PCI slots
      • • Set Auto Boot, Auto Search, and Auto Start
        • • Set Auto Boot, Auto Search, and Auto Start
      • • Set Fastboot
        • • Set Fastboot
      • • Display LAN information
        • • Display LAN information
      • • Display system information
        • • Display system information
    • The boot console menus follow, showing the various tasks you can perform and the available inform...
    • The shortened version of all commands is indicated by the uppercase letters.
    • Boot Console Handler:help,
      • Boot Console Handler:help,
  • Boot Console Handler:accessing,
    • Boot Console Handler:accessing,
      • Boot Console Handler:accessing,
    • If the workstation has crashed or power was turned off for some reason, press the power switch an...
    • 1. Close any files and applications on your computer.
      • 1. Close any files and applications on your computer.
        • 1. Close any files and applications on your computer.
      • 2. Press the power switch on the front panel of the workstation.
        • 2. Press the power switch on the front panel of the workstation.
        • NOTE There is no need to manually shut down the HP-UX operating system on your computer before po...
          • NOTE There is no need to manually shut down the HP-UX operating system on your computer before po...
        • Make sure you do not unplug the system’s power cord or otherwise interrupt power to the system un...
      • 3. Power on the workstation after it has completely shut down. If
        • 3. Power on the workstation after it has completely shut down. If
        • NOTE If you are using a power-saving monitor, you will have less than 10 seconds from the time th...
          • NOTE If you are using a power-saving monitor, you will have less than 10 seconds from the time th...
      • 4. Press a key. You will then see the message: 
        • 4. Press a key. You will then see the message: 
  • Boot Console Handler:menus,
    • Boot Console Handler:menus,
      • Boot Console Handler:menus,
    • The boot console menus follow, showing the various tasks you can perform and the available inform...
      • The boot console menus follow, showing the various tasks you can perform and the available inform...
    • The shortened version of all commands is indicated by the uppercase letters.
    • Help is available for all the menus and commands by typing either help, he or ? and the menu or c...
    • Boot Console Handler:main menu,
      • Boot Console Handler:main menu,
    • ---------------- Main Menu ------------------------------------------------
    • Command Description
    • ---------------------------------------------
    • BOot [PRI|ALT|<path>] Boot from specified path PAth [PRI|ALT|CON|KEY|[<path>] ...
    • COnfiguration [<command>] Access Configuration menu/commands INformation [<command>]...
    • DIsplay Redisplay the current menu HElp [<menu>|<commands>]...
    • ------------- Main Menu: Enter command >
    • BOot [<menu>|<command>]  Display help for menu or command DIsplay...
    • ----- Configuration Menu: Enter command >
    • -------------
    • ------ Information Menu: Enter command >
    • PIM [<proc> [HPMC|LPMC|TOC]]Display PIM information ScRoll [ON|OFF]  Display or ch...
    • BOot [PRI|ALT|<path>]Boot from specified path DIsplayRedisplay th...
    • ----- Service Menu: Enter command >
  • Boot Console Handler:booting the workstation,
    • Boot Console Handler:booting the workstation,
      • Boot Console Handler:booting the workstation,
    • In general the B Class and C Class workstation is started by the power switch and HP-UX boots aut...
      • In general the B Class and C Class workstation is started by the power switch and HP-UX boots aut...
    • For example, you may want to start the workstation from an operating system that is stored on a d...
    • Here are some possible booting scenarios you may encounter:
    • • If you know which device you want to boot from, and you know that it contains a bootable operat...
      • • If you know which device you want to boot from, and you know that it contains a bootable operat...
        • • If you know which device you want to boot from, and you know that it contains a bootable operat...
        • where
      • • If you do not know which device you want to boot from, then type the following at the prompt a...
        • • If you do not know which device you want to boot from, then type the following at the prompt a...
        • A message similar to the following will be displayed:
        • Path Number Device Path Device Type
          • Path Number Device Path Device Type
        • ---------------------------------------------
        • P0IDETEAC CD-532E-B
          • P0IDETEAC CD-532E-B
        • P1FWSCSI.6.0SEAGATE ST39102LC
          • P1FWSCSI.6.0SEAGATE ST39102LC
        • At the prompt, you might type the following and press
        • Note that the operating system on the specified device (
      • • If you wish to interact with the Initial System Loader (ISL) before booting the workstation, fo...
        • • If you wish to interact with the Initial System Loader (ISL) before booting the workstation, fo...
        • The following prompt will appear:
        • Answering yes (
        • ISL is the program that actually controls the loading of the operating system. By interacting wit...
        • For example, if the usual kernel (
      • • If you do not know which media in your file systems have bootable operating systems, you can fi...
        • • If you do not know which media in your file systems have bootable operating systems, you can fi...
  • Boot Console Handler:bootable media search,
    • Boot Console Handler:bootable media search,
      • Boot Console Handler:bootable media search,
    • To list devices that contain bootable media, follow the directions in “Accessing the Boot Console...
    • Main Menu: Enter command > search ipl
      • Main Menu: Enter command > search ipl
    • The search command searches all buses. The search may turn up more devices than there are lines o...
    • • To hold the display temporarily, press Ctrl S
      • • To hold the display temporarily, press Ctrl S
        • • To hold the display temporarily, press Ctrl S
      • • To continue the display, press Ctrl Q
        • • To continue the display, press Ctrl Q
      • • To halt the search, press any other key
        • • To halt the search, press any other key
    • These flow-control commands do not work with a bit-mapped display, but such a display can show mo...
    • To search for devices of just one type that actually contain bootable media, follow the direction...
    • Main Menu: Enter command> search ipl device_type
      • Main Menu: Enter command> search ipl device_type
    • Where
    • • 
      • • 
        • • 
    • • 
      • • 
        • • 
    • • 
      • • 
        • • 
    • • 
      • • 
        • • 
    • • 
      • • 
        • • 
    • For more information about the
    • Main Menu: Enter command> help search
      • Main Menu: Enter command> help search
  • Boot Console Handler:default values,
    • Boot Console Handler:default values,
      • Boot Console Handler:default values,
    • To reset your workstation to its predefined values, follow the directions in “Accessing the Boot ...
    • When the Configuration Menu appears, type the following at the prompt and press
    • When the Configuration Menu appears, type the following at the prompt and press
  • Boot Console Handler:displaying and setting paths,
    • Boot Console Handler:displaying and setting paths,
      • Boot Console Handler:displaying and setting paths,
    • A path is the hardware address of a device that is attached to the I/O system of your workstation...
      • A path is the hardware address of a device that is attached to the I/O system of your workstation...
      • The path command sets and displays the hardware address of a specified device attached to the I/O...
    • <TABLE>
      • Table61. System Paths
      • <TABLE HEADING>
        • <TABLE ROW>
          • Path Type
            • Path Type
          • Device
      • <TABLE BODY>
        • <TABLE ROW>
          • primary or pri
            • primary
              • primary
          • Your workstation’s default boot device (usually the root disk)
            • Your workstation’s default boot device (usually the root disk)
        • <TABLE ROW>
          • alternate or alt
            • alternate
              • alternate
          • Your workstation’s alternate boot device (usually a DDS-format tape device)
            • Your workstation’s alternate boot device (usually a DDS-format tape device)
        • <TABLE ROW>
          • console or con
            • console
              • console
          • Your workstation’s primary display device
            • Your workstation’s primary display device
        • <TABLE ROW>
          • keyboard or key
            • keyboard
              • keyboard
          • Your workstation’s primary ASCII input device
            • Your workstation’s primary ASCII input device
    • To display the current settings for the system paths, type the following at the prompt and press
    • The paths are displayed in Mnemonic Style Notation, as shown in Table 6-2.
    • <TABLE>
      • Table62. Mnemonic Style Notation
      • <TABLE HEADING>
        • <TABLE ROW>
          • I/O
            • I/O
          • Specification Format
            • Specification Format
      • <TABLE BODY>
        • <TABLE ROW>
          • Built-in LVD SCSI
            • Built-in LVD SCSI
          • fwscsi.scsi_address.logical_unit_number
            • fwscsi.scsi_address.logical_unit_number
              • fwscsi.scsi_address.logical_unit_number
        • <TABLE ROW>
          • Built-in NSE SCSI
            • Built-in NSE SCSI
          • scsi.scsi_address.logical_unit_number
            • scsi.scsi_address.logical_unit_number
              • scsi.scsi_address.logical_unit_number
        • <TABLE ROW>
          • Optional SCSI
            • Optional SCSI
          • pcin.scsi_address.logical_unit_number
            • pcin.scsi_address.logical_unit_number
              • pcin.scsi_address.logical_unit_number
        • <TABLE ROW>
          • Built-in LAN
          • lan.server_address.init_timeout.io_timeout
            • lan.server_address.init_timeout.io_timeout
              • lan.server_address.init_timeout.io_timeout
        • <TABLE ROW>
          • Built-in IDE
            • Built-in IDE
          • IDE
            • IDE
              • IDE
    • To display the current setting for a particular system path, follow the directions in “Accessing ...
    • where
    • For example, to get the path to the primary boot device, follow the directions in “Accessing Boot...
    • To set a system path to a new value, follow the directions in “Accessing the Boot Console Handler...
    • where
  • Boot Console Handler:monitor type,
    • Boot Console Handler:monitor type,
      • Boot Console Handler:monitor type,
    • The workstation ships from the factory preset to use a monitor with a specific resolution and fre...
      • The workstation ships from the factory preset to use a monitor with a specific resolution and fre...
    • The
      • The
      • The
        • The
      • NOTE The monitor command lets you change your workstation’s graphics configuration before you rep...
        • NOTE The monitor command lets you change your workstation’s graphics configuration before you rep...
      • To display the current graphics and console information, enter the following command:
      • The correct usage for setting the graphics configurations is:
      • where valid graphics_path parameters are:
      • and type is the numerical monitor type as shown with the monitor list command. For example, an HP...
      • NOTE No space/blank characters may be used in the
        • NOTE No space/blank characters may be used in the
    • Displaying the Current
      • Displaying the Current
      • To display the current monitor configuration for your system from the Configuration Menu of the B...
      • This places you in the Configuration Menu. From here, type the following command at the prompt an...
      • The screen displays a list of the current graphics adapters and their monitor types configured fo...
      • MONITOR INFORMATION
        • MONITOR INFORMATION
      • ------- ----- ----------  ---------- ----- ---- -------
        • ------- ----- ----------  ---------- ----- ---- -------
      • GRAPHICS(2)
        • GRAPHICS(2)
      • Configuration Menu: Enter command>
        • Configuration Menu: Enter command>
      • In this example, only the graphics adapter,
    • Setting the
      • Setting the
      • You can set the monitor type for a graphics adapter by typing the following at the prompt and pre...
      • Where n is the number of the graphics adapter and tt is the monitor type. To display a list of su...
      • A list of valid monitor types similar to the following is displayed:
      • MONITOR INFORMATION PathSlotHeadTypeSizeFreqClass ------------------...
        • MONITOR INFORMATION PathSlotHeadTypeSizeFreqClass ------------------...
      • To set the monitor type for
      • This will take effect on the next reboot.
      • MONITOR INFORMATION
        • MONITOR INFORMATION
      • ----- ----- ----------- ----------- ------ --- -------
        • ----- ----- ----------- ----------- ------ --- -------
      • GRAPHICS(2)
        • GRAPHICS(2)
      • Configuration Menu: Enter command>
        • Configuration Menu: Enter command>
      • The boot console may display a message that tells you that your new monitor selection will take e...
      • Trying to change the monitor type to a number not listed for that graphics device fails and gives...
      • Value of monitor type n out of range (n - nn)
        • Value of monitor type n out of range (n - nn)
      • Trying to change the monitor type on an empty slot fails and gives you the following warning mess...
    • Setting the Monitor Type at Power On
      • Setting the Monitor Type at Power On
      • If you replace your workstation’s monitor with a different monitor type, you need to let the comp...
      • Once you have rebooted the system by turning it off, wait for a short time for the hard disk driv...
      • NOTE It takes approximately one to two minutes after powering on the workstation before the
        • NOTE It takes approximately one to two minutes after powering on the workstation before the
      • Wait two seconds after the
      • MONITOR INFORMATION
        • MONITOR INFORMATION
      • ------ ------ --------- -------  ----- -------
        • ------ ------ --------- -------  ----- -------
      • GRAPHICS(2)
        • GRAPHICS(2)
      • Press[RETURN]to select this monitor type(type n of n types)
        • Press[RETURN]to select this monitor type(type n of n types)
      • Note that if you do not select this monitor type, the system cycles through all of the available ...
      • Once you have made your monitor type selection, the system queries you to confirm your selection....
      • If you press any key other than
      • At this point, the new monitor type is active, but not saved. Because you didn’t save the monitor...
      • Next, the following message is displayed:
      • To restart the monitor selection process, press
    • Boot Console Handler:monitor problems,
      • Boot Console Handler:monitor problems,
        • Boot Console Handler:monitor problems,
      • In the event that your console stops displaying to your graphics device, use the following proced...
        • In the event that your console stops displaying to your graphics device, use the following proced...
      • 1. Turn the workstation power off.
        • 1. Turn the workstation power off.
          • 1. Turn the workstation power off.
        • 2. Disconnect the USB keyboard connector from the rear panel.
          • 2. Disconnect the USB keyboard connector from the rear panel.
        • 3. Connect a serial terminal emulator to the Serial 1 connector (the left serial connector) on th...
          • 3. Connect a serial terminal emulator to the Serial 1 connector (the left serial connector) on th...
        • 4. Power on the system. The system will now display the console to the terminal connected to Seri...
          • 4. Power on the system. The system will now display the console to the terminal connected to Seri...
        • 5. Set the monitor type and path using the Boot Console Handler.
          • 5. Set the monitor type and path using the Boot Console Handler.
  • Boot Console Handler:memory configuration,
    • Boot Console Handler:memory configuration,
      • Boot Console Handler:memory configuration,
    • The following sample screen output uses the
    • To display the current memory configuration for you system, from the Information Menu of the boot...
    • Memory:information sample,
      • Memory:information sample,
        • Memory:information sample,
      • The following sample shows the memory information when memory modules are properly installed and ...
      • MEMORY INFORMATION MEMORY STATUS TABLE SlotSizeStatus ------------- ---...
        • MEMORY INFORMATION MEMORY STATUS TABLE SlotSizeStatus ------------- ---...
        • 0256MBActive
      • MEMORY FAULT TABLE
        • MEMORY FAULT TABLE
        • Slot  Size Status
      • Active, Installed Memory: 640MB of SDRAM
        • Active, Installed Memory: 640MB of SDRAM
      • Deallocated Pages : 0 Pages
        • Deallocated Pages : 0 Pages
      •  ...
      • Available Memory : 640 MB
        • Available Memory : 640 MB
      • Good Memory Required by OS : 0 (not initialized)
        • Good Memory Required by OS : 0 (not initialized)
      •  Memory
        •  Memory
        • HVERSION SVERSION
      • -------- ---------
        • -------- ---------
  • Boot Console Handler:I/O slot status,
    • Boot Console Handler:I/O slot status,
      • Boot Console Handler:I/O slot status,
    • The I/O command lets you identify all built-in I/O devices and optional I/O devices installed in ...
    • ...
    • I/O MODULE INFORMATION PathDecimalType LocationHVERSVERVersDep --...
      • I/O MODULE INFORMATION PathDecimalType LocationHVERSVERVersDep --...
  • Boot Console Handler:auto boot and auto search,
    • Boot Console Handler:auto boot and auto search,
      • Boot Console Handler:auto boot and auto search,
    • The
    • The
    • To examine the state of the
    • If
    • The state of the
    • To change the state of the auto boot or auto search flags, type the following at the prompt and p...
    • or
    • where
    • Auto search
      • Auto search
    • Primary Boot Path (can be set by the user)
    • Alternate Boot Path (can be set by the user)
    • Ultra2 Wide Low-Voltage Differential SCSI (built-in)
    • PCI 1 through PCI 6 (plug-in interface cards)
    • Ultra Narrow Single-Ended SCSI (built-in)
    • LAN (built-in)
  • Boot Console Handler:security mode,
    • Boot Console Handler:security mode,
      • Boot Console Handler:security mode,
    • The
      • The
    • When the
    • Note that the
    • To display the current setting for the
    • To set the
    • To set the
  • Boot Console Handler:fastboot mode,
    • Boot Console Handler:fastboot mode,
      • Boot Console Handler:fastboot mode,
    • When
      • When
      • When
      • If you are experiencing difficulty in booting the workstation, set
      • To display the status of
      • To disable
      • To enable
  • Boot Console Handler:LAN station address,
    • Boot Console Handler:LAN station address,
      • Boot Console Handler:LAN station address,
    • It is sometimes necessary to supply the LAN station address of the workstation to other users. Fo...
      • It is sometimes necessary to supply the LAN station address of the workstation to other users. Fo...
      • A LAN station address for the workstation is the label that uniquely identifies the LAN connectio...
      • To display the workstation’s LAN station address, type the following at the prompt and press
      • The LAN station address is displayed as a twelve-digit number in hexadecimal notation, similar to...
      • The address is for the workstation’s built-in LAN interface.
  • Boot Console Handler:system information,
    • Boot Console Handler:system information,
      • Boot Console Handler:system information,
    • The
    • This information is paged to allow you to view it as necessary, unless the
  • Boot Console Handler:PIM,
    • Boot Console Handler:PIM,
      • Boot Console Handler:PIM,
    • The
    • You can use pim in the following ways:
    • where
  • Stable Storage
    • Stable Storage
    • Stable storage is non-volatile memory associated with the PA-RISC processor module. Stable storag...
    • • Device path information
      • • Device path information
        • • Device path information
      • • The state of the boot flags
        • • The state of the boot flags
      • • HPMC error information
        • • HPMC error information
      • • Operating system initialization data
        • • Operating system initialization data
  • Boot Console Handler:ISL,
    • Boot Console Handler:ISL,
      • Boot Console Handler:ISL,
    • The ISL environment provides the means to load the operating system (HP-UX) environment. The ISL ...
    • The ISL program is the first program loaded into main memory from an external medium (LAN, disk, ...
    • The ISL environment provides the following capabilities:
    • • Execute user-entered commands to modify boot device paths and boot options in stable storage.
      • • Execute user-entered commands to modify boot device paths and boot options in stable storage.
        • • Execute user-entered commands to modify boot device paths and boot options in stable storage.
      • • Run offline diagnostic programs and utilities
        • • Run offline diagnostic programs and utilities
      • • Provide automatic booting of the HP-UX operating system after power-on or reset
        • • Provide automatic booting of the HP-UX operating system after power-on or reset
    • Invoking ISL from the Boot Console Handler
      • Invoking ISL from the Boot Console Handler
      • Perform the following steps to invoke ISL from the boot console handler:
      • Step 1. Follow the directions in “Accessing the Boot Console Handler”, and then type the followin...
        • Step 1. Follow the directions in “Accessing the Boot Console Handler”, and then type the followin...
          • Step 1. Follow the directions in “Accessing the Boot Console Handler”, and then type the followin...
          • You are prompted:
        • Step 2. Answering yes (
          • Step 2. Answering yes (
          • ISL is the program that actually controls the loading of the operating system. By interacting wit...
          • For example, if the usual kernel (
    • ISL:
      • ISL:
        • ISL:
      • The following commands available in the ISL environment allow you to display and modify the boot ...
      • • help
        • • help
          • • help
            • • help
        • • display
          • • display
            • • display
        • • primpath
          • • primpath
            • • primpath
        • • altpath
          • • altpath
            • • altpath
        • • conspath
          • • conspath
            • • conspath
        • • listautofl
          • • listautofl
            • • listautofl
        • • support
          • • support
            • • support
        • • readss
          • • readss
            • • readss
  • Boot Console Handler:firmware,
    • Boot Console Handler:firmware,
      • Boot Console Handler:firmware,
    • To update a system’s firmware, the firmware patch must be obtained from the patch server website ...
      • To update a system’s firmware, the firmware patch must be obtained from the patch server website ...
      • The patch file is a combined shar’ed file that contains an ASCII cataloging file, a readme type A...
    • Step 1. Verify the checksum of the file ".FRM" using the "
      • Step 1. Verify the checksum of the file ".FRM" using the "
        • Step 1. Verify the checksum of the file ".FRM" using the "
      • Step 2. Use the "dd" command to copy the file "
        • Step 2. Use the "dd" command to copy the file "
    • Identify Current Version of Firmware (on system to be updated)
    • Step 1. Re-boot your system and do the following:
      • Step 1. Re-boot your system and do the following:
        • Step 1. Re-boot your system and do the following:
        • a. Interrupt the boot process and from the Boot Console Handlerprompt, type <
        • b. Identify your firmware revision. The last two digits in the patch name indicate the revision. ...
    • To install the firmware update
      • To install the firmware update
      • The following are the directions from the readme file that are the firmware updating instructions...
      • Step 1. Install the tape you have just created into your tape drive.
        • Step 1. Install the tape you have just created into your tape drive.
          • Step 1. Install the tape you have just created into your tape drive.
        • Step 2. Shutdown your system via the power switch and power back on, or execute the reboot comman...
          • Step 2. Shutdown your system via the power switch and power back on, or execute the reboot comman...
        • Step 3. When the display reads "Searching for a system to boot" press [escape]. At the BOOT ADMIN...
          • Step 3. When the display reads "Searching for a system to boot" press [escape]. At the BOOT ADMIN...
        • Step 4. Boot from the appropriate boot path. (You must boot from the device that contains the fir...
          • Step 4. Boot from the appropriate boot path. (You must boot from the device that contains the fir...
          • NOTE This process is automatic and requires no interaction until directed to do so. Please do not...
            • NOTE This process is automatic and requires no interaction until directed to do so. Please do not...
        • Step 5. A warning message will be issued, followed by "
          • Step 5. A warning message will be issued, followed by "
          • After several screens go by, you will be informed as to what firmware image is on your system and...
          • If the image on the tape has a higher revision number, type <
          • NOTE FROM THIS POINT FORWARD, THIS PROCESS CANNOT BE INTERRUPTED UNTIL COMPLETION. INTERRUPTING T...
            • NOTE FROM THIS POINT FORWARD, THIS PROCESS CANNOT BE INTERRUPTED UNTIL COMPLETION. INTERRUPTING T...
            • DURING THE EXECUTION OF THIS UPDATE, THE FIRMWARE FONTS FILE WILL BE RE-WRITTEN. IF THESE ARE NEW...
          • You will see 2 carriage returns and 2 line feeds and then the display will remain the same. In ap...
          • The system will continue the normal boot process from the default primary path.
    • Firmware:update example,
      • Firmware:update example,
        • Firmware:update example,
      • When you update the firmware, you will see the following information on the display.
      • launch IPL other
• Product specifications:
  • Product specifications:
    • Product specifications:
  • This appendix lists the regulatory specifications, safety requirements, environmental specificati...
    • This appendix lists the regulatory specifications, safety requirements, environmental specificati...
  • B1000/C3000:regulatory statements,
    • B1000/C3000:regulatory statements,
      • B1000/C3000:regulatory statements,
    • This section lists the regulatory and safety statements for the B1000 and the C3000 workstations.
      • This section lists the regulatory and safety statements for the B1000 and the C3000 workstations.
    • B1000/C3000:declaration of conformity,
      • B1000/C3000:declaration of conformity,
      • <GRAPHIC>
    • B1000/C3000:emissions regulations,
      • B1000/C3000:emissions regulations,
        • B1000/C3000:emissions regulations,
      • Federal Communications Commission (FCC)
      • This equipment has been tested and found to comply with the limits for a Class B digital device, ...
      • Hewlett-Packard’s system certification tests were conducted with HP-supported peripheral devices ...
      • Operation of this device is subject to the following conditions:
      • • This device may not cause harmful interference.
        • • This device may not cause harmful interference.
          • • This device may not cause harmful interference.
        • • This device must accept interference received, including interference that may cause undesired ...
          • • This device must accept interference received, including interference that may cause undesired ...
        • • Cables used with this device must be properly shielded to comply with the requirements of the FCC.
          • • Cables used with this device must be properly shielded to comply with the requirements of the FCC.
    • B1000/C3000:video statement,
      • B1000/C3000:video statement,
        • B1000/C3000:video statement,
      • When a Video Out card has a cable connected to its video out connector, the HP Visualize B Class ...
      • FigureA1. VCCI Class B ITE (Japan)
        • FigureA1. VCCI Class B ITE (Japan)
        • <GRAPHIC>
      • FigureA2. RRL Class A EMI (Korea)
        • FigureA2. RRL Class A EMI (Korea)
        • <GRAPHIC>
      • FigureA3. EMI Class A (Taiwan)
        • FigureA3. EMI Class A (Taiwan)
        • <GRAPHIC>
    • B1000/C3000:emissions regulations,
      • B1000/C3000:emissions regulations,
        • B1000/C3000:emissions regulations,
      • Any third-party I/O device installed in HP system(s) must be in accordance with the requirements ...
    • B1000/C3000:acoustics,
      • B1000/C3000:acoustics,
        • B1000/C3000:acoustics,
      • Regulation On Noise Declaration For Machines -3. GSGV
      • Lpa <70dB   Lpa <70dB
      • operator position  am Arbeitsplatz
      • normal operation normaler Betrieb
      • per ISO 7779 nach DIN 45635 T.19
    • B1000/C3000:laser statements,
      • B1000/C3000:laser statements,
        • B1000/C3000:laser statements,
      • (For workstations that have a CD drive installed.)
      • The CD-ROM mass-storage system is certified as a Class 1 laser product under the U.S. Department ...
      • This means that the mass-storage system does not produce hazardous laser radiation. Because laser...
    • B1000/C3000:LEDs,
      • B1000/C3000:LEDs,
        • B1000/C3000:LEDs,
      • The LEDs on this product are classified as “Class 1 LED PRODUCT” in accordance with EN 60825-1.
    • Electrostatic Discharge:ESD precautions,
      • Electrostatic Discharge:ESD precautions,
        • Electrostatic Discharge:ESD precautions,
      • Electrostatic charges can damage the integrated circuits on printed circuits boards. To prevent s...
      • • Stand on a static-free mat.
        • • Stand on a static-free mat.
          • • Stand on a static-free mat.
        • • Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your...
          • • Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your...
        • • Connect all equipment together, including the static-free mat, static strap, routing nodes, and...
          • • Connect all equipment together, including the static-free mat, static strap, routing nodes, and...
        • • Keep uninstalled printed circuit boards in their protective antistatic bags.
          • • Keep uninstalled printed circuit boards in their protective antistatic bags.
        • • Handle printed circuit boards by their edges, once you have removed them from their protective ...
          • • Handle printed circuit boards by their edges, once you have removed them from their protective ...
    • B1000/C3000:warnings,
      • B1000/C3000:warnings,
        • B1000/C3000:warnings,
      • <GRAPHIC>
        • <GRAPHIC>
  • B1000/C3000:environmental specifications,
    • B1000/C3000:environmental specifications,
      • B1000/C3000:environmental specifications,
    • Acoustics
      • Acoustics
      • Deskside:4.7 bels typical @ 25˚ C
      • 4.9 bels typical @ 30˚ C
    • Altitude
      • Altitude
      • Operating: 0-10,000 ft. above sea level (0-3000m)
      • Non-operating (storage or shipping): 0-15,000 ft. above sea level (0-4500m)
    • DC Magnetic Field Interference
      • DC Magnetic Field Interference
      • Operating: <1 Gauss at surface of product
      • Non-operating: <2 mGauss @ 7 feet
    • Electromagnetic Compatibility (EMC)
      • Electromagnetic Compatibility (EMC)
      • Emissions: FCC Class B, CISPR B
      • Immunity:   EN61000-4-2: 1995 - 4KV contact discharge, 8KV air discharge (ESD)
      • EN61000-4-3: 1991 - 10V/m (radiated immunity)
      • EN61000-4-4: 1995 - 2kV signal lines, 4kV power lines (EFT)
    • Temperature
      • Temperature
      • Operating: 5 to +40˚ C
      • Non-operating (shipping or storage): -40 to +70˚ C
    • Humidity (Non-condensing)
      • Humidity (Non-condensing)
      • Operating: 15 to 80% RH
      • Non-operating: 0 to 90% RH(storage or shipping)
    • Leakage Current
      • Leakage Current
      • Less than 3 milliamps
    • Shock
      • Shock
      • Operating: 20g at 3ms, 1/2 sine in normal axis with no hard errors
      • Non-operating (shipping): 80g at 3ms, 1/2 sine, normal axis
    • Vibration
      • Vibration
      • Operating random: 0.21 Grms, 5-500 Hz
      • Swept sine survival (shipping): 0.5 G (0-peak), 5-500 Hz
      • Random survival (shipping): 2.09 Grms, 5-500 Hz
  • B1000/C3000:electrical specifications,
    • B1000/C3000:electrical specifications,
      • B1000/C3000:electrical specifications,
      • B1000/C3000:electrical specifications,
    • Input Power 
      • Input Power 
      • For B Class and C Class workstations:
      • <TABLE>
        • <TABLE BODY>
          • <TABLE ROW>
            • 7.4 Amps RMS max @ 100V
          • <TABLE ROW>
            • 6.2 Amps RMS max @ 120V
          • <TABLE ROW>
            • 3.8 Amps RMS max @ 200V
          • <TABLE ROW>
            • 3.2 Amps RMS max @ 230V
    • line power,
      • line power,
        • line power,
      • <TABLE>
        • <TABLE BODY>
          • <TABLE ROW>
            • AC Frequency: 48-66 Hz
          • <TABLE ROW>
            • AC Voltage: 90-264V
          • <TABLE ROW>
            • Maximum Power Input: 805 Watts
          • <TABLE ROW>
            • Maximum Current Load: 10 Amps
• SCSI:
  • SCSI:
    • SCSI:
  • This appendix provides information about connecting Small Computer System Interface (SCSI) device...
  • The following topics are covered within this section:
  • • SCSI bus differences
    • • SCSI bus differences
    • • SCSI restrictions
    • • Determining SCSI bus length
    • • Assigning SCSI device IDs
    • • Connecting to the SCSI ports
  • The instructions in this chapter assume you are using HP-UX 10.20 operating system and Workstatio...
  • NOTE When attaching external SCSI devices, be sure to terminate the last device on the external S...
    • NOTE When attaching external SCSI devices, be sure to terminate the last device on the external S...
  • SCSI:bus differences
    • SCSI:bus differences
      • SCSI:bus differences
    • A Small Computer Systems Interface (SCSI) bus is an IEEE standard bus for connecting your worksta...
    • There are two types of SCSI buses available with this workstation—an Ultra Narrow Single-Ended SC...
    • SCSI:mixing NSE and LVD devices on the same bus
      • SCSI:mixing NSE and LVD devices on the same bus
        • SCSI:mixing NSE and LVD devices on the same bus
    • <TABLE>
      • TableB1. SCSI Bus Differences
      • <TABLE HEADING>
        • <TABLE ROW>
          • Type
          • Transfer Rate
            • Transfer Rate
          • Data Bus Width
            • Data Bus Width
          • Available SCSI Addresses1
          • Maximum Cable Length
            • Maximum Cable Length
          • Device Physical Location2
            • Device Physical Location2
      • <TABLE BODY>
        • <TABLE ROW>
          • Ultra Narrow Single-Ended
            • Ultra Narrow Single-Ended
          • Up to 20 Mbytes/sec
            • Up to 20 Mbytes/sec
          • 8 bits
            • 8 bits
          • 0 through 6
            • 0 through 6
          • 3.0 meters (9.84 feet)
            • 3.0 meters (9.84 feet)
          • External
            • External
        • <TABLE ROW>
          • Ultra2 Wide Low-Voltage Differential
            • Ultra2 Wide Low-Voltage Differential
          • Up to 80 Mbytes/sec
            • Up to 80 Mbytes/sec
          • 16 bits
            • 16 bits
          • 0 through 6; 8 through 15
            • 0 through 6; 8 through 15
          • 12 meters (39.37 feet)
            • 12 meters (39.37 feet)
          • Internal and external
            • Internal and external
        • <TABLE ROW>
          • 1. Address 7 is reserved for host controller use on all buses.
            • 1. Address 7 is reserved for host controller use on all buses.
            • 2. This information is specific to the HP Visualize B Class and C Class workstations.
  • SCSI:scsi restrictions
    • SCSI:scsi restrictions
      • SCSI:scsi restrictions
    • This section describes the SCSI restrictions that apply to your workstation in the following areas:
      • This section describes the SCSI restrictions that apply to your workstation in the following areas:
    • • Cables
      • • Cables
        • • Cables
      • • Terminators
        • • Terminators
      • • Number of Devices Per SCSI Bus
      • • Considerations for Selecting SCSI Devices
    • NOTE The Ultra Narrow, single-ended SCSI bus supports only 7 devices because address 7 is reserve...
      • NOTE The Ultra Narrow, single-ended SCSI bus supports only 7 devices because address 7 is reserve...
    • Cables
      • Cables
      • Only SCSI cables approved by HP can be used to connect your workstation and any SCSI devices. HP ...
      • <TABLE>
        • TableB2. Ultra Narrow Single-Ended SCSI Cables
        • <TABLE HEADING>
          • <TABLE ROW>
            • Cable Number
            • Cable Length
              • Cable Length
            • Description
              • Description
        • <TABLE BODY>
          • <TABLE ROW>
            • C2955A
            • 0.5m
              • 0.5m
            • 50-pin HDTS to 50-pin HDTS
              • 50-pin HDTS
          • <TABLE ROW>
            • C2908A
              • C2908A
            • 1.0m
              • 1.0m
          • <TABLE ROW>
            • C2956A
              • C2956A
            • 1.5m
              • 1.5m
          • <TABLE ROW>
            • C2957A
              • C2957A
            • 2.0m
              • 2.0m
      • HP offers the following SCSI cables for connecting externally connected devices to the system Ult...
      • <TABLE>
        • TableB3. Ultra2 Wide Low-Voltage Differential SCSI Cables
        • <TABLE HEADING>
          • <TABLE ROW>
            • Cable Number
              • Cable Number
            • Cable Length
              • Cable Length
            • Description
              • Description
        • <TABLE BODY>
          • <TABLE ROW>
            • C2978A
              • C2978A
            • 0.5m
              • 0.5m
            • 68-pin HDTS to 68-pin HDTS
              • 68-pin HDTS
          • <TABLE ROW>
            • C2979A
              • C2979A
            • 1.5m
              • 1.5m
          • <TABLE ROW>
            • C2911B
              • C2911B
            • 1.0m
              • 1.0m
          • <TABLE ROW>
            • C2924B
              • C2924B
            • 2.5m
              • 2.5m
          • <TABLE ROW>
            • C2361A
              • C2361A
            • 1.0m
              • 1.0m
            • 68-pin VHDCI to 68-pin HDTS
              • 68-pin VHDCI
          • <TABLE ROW>
            • C2362A
              • C2362A
            • 2.5m
              • 2.5m
          • <TABLE ROW>
            • C2363A
              • C2363A
            • 10.0m
              • 10.0m
          • <TABLE ROW>
            • C2365A
              • C2365A
            • 5.0m
              • 5.0m
      • CAUTION SCSI cables approved by HP are designed to function within the SCSI tolerances for HP dev...
        • CAUTION SCSI cables approved by HP are designed to function within the SCSI tolerances for HP dev...
      • Always use the shortest possible cable(s) for your configuration.
      • NOTE See “Determining SCSI Bus Length” later in this Appendix to determine the total length of yo...
        • NOTE See “Determining SCSI Bus Length” later in this Appendix to determine the total length of yo...
    • SCSI:terminators
      • SCSI:terminators
        • SCSI:terminators
      • The terminators for Ultra2 Wide Low-Voltage Differential SCSI (LVD SCSI) and Ultra Narrow Single-...
      • CAUTION It is necessary to put a terminator on unused SCSI connectors on the back panel of the sy...
        • CAUTION It is necessary to put a terminator on unused SCSI connectors on the back panel of the sy...
    • Number of Devices Per SCSI Bus
      • Number of Devices Per SCSI Bus
      • The number of SCSI devices per bus is limited (see
      • This workstation offers the following types of SCSI buses, each with their own configuration cons...
      • • Ultra Narrow Single-Ended SCSI bus
        • • Ultra Narrow Single-Ended SCSI bus
          • • Ultra Narrow Single-Ended SCSI bus
        • • Ultra2 Wide Low-Voltage Differential SCSI bus
          • • Ultra2 Wide Low-Voltage Differential SCSI bus
    • Considerations for Selecting SCSI Devices
      • Considerations for Selecting SCSI Devices
      • SCSI devices supported by the Hewlett-Packard Company for the Ultra Narrow Single-Ended (NSE) and...
      • If devices other than those supported by HP are connected to the Ultra Narrow Single-Ended or the...
      • Because Ultra2 Wide Low-Voltage Differential SCSI is a relatively new technology, there can be pr...
      • Low-voltage differential signaling specifications are described in the
      • Global Engineering Documents
      • 15 Inverness Way East
      • Englewood, CO 80112-5704
      • (800) 854-7179 or (303) 397-7956
  • SCSI:bus lengths
    • SCSI:bus lengths
      • SCSI:bus lengths
    • This section discusses SCSI bus length constraints for the Ultra Narrow Single-Ended SCSI bus and...
      • This section discusses SCSI bus length constraints for the Ultra Narrow Single-Ended SCSI bus and...
    • SCSI:Ultra Narrow Single-Ended,
      • SCSI:Ultra Narrow Single-Ended,
        • SCSI:Ultra Narrow Single-Ended,
      • The maximum cable length for a Ultra Narrow Single-Ended SCSI bus is 3 meters. The HP Visualize B...
      • NOTE When calculating the total Ultra Narrow Single-Ended SCSI cable/bus/trace length used extern...
        • NOTE When calculating the total Ultra Narrow Single-Ended SCSI cable/bus/trace length used extern...
      • There are two total cable length specifications that apply to the Ultra Narrow Single-Ended SCSI ...
      • The total cable length specifications are described below:
      • • For a total of one to four devices being connected to the NSE SCSI bus the total length of cabl...
        • • For a total of one to four devices being connected to the NSE SCSI bus the total length of cabl...
          • • For a total of one to four devices being connected to the NSE SCSI bus the total length of cabl...
        • • For a total of five to eight devices being connected to the NSE SCSI bus the total length of ca...
          • • For a total of five to eight devices being connected to the NSE SCSI bus the total length of ca...
      • NOTE Remember that the workstation is counted as one of the total device, and the internal length...
        • NOTE Remember that the workstation is counted as one of the total device, and the internal length...
    • SCSI:Ultra2 Wide Low-Voltage Differential,
      • SCSI:Ultra2 Wide Low-Voltage Differential,
        • SCSI:Ultra2 Wide Low-Voltage Differential,
      • The maximum cable length for a Ultra Wide Low-Voltage Differential SCSI bus is 12 meters. The HP ...
        • The maximum cable length for a Ultra Wide Low-Voltage Differential SCSI bus is 12 meters. The HP ...
      • NOTE When calculating the total Ultra2 Wide Low-Voltage Differential SCSI cable/bus/trace length ...
        • NOTE When calculating the total Ultra2 Wide Low-Voltage Differential SCSI cable/bus/trace length ...
  • SCSI:device IDs,
    • SCSI:device IDs,
      • SCSI:device IDs,
    • Before assigning a SCSI device ID to your drive, you need to check the existing SCSI device IDs. ...
    • 1. At a command line prompt, enter the following:
      • 1. At a command line prompt, enter the following:
        • 1. At a command line prompt, enter the following:
        • /usr/sbin/ioscan -f
          • /usr/sbin/ioscan -f
    • After a few moments, the ioscan utility lists all of the SCSI I/O devices it could find. The list...
    • Class I H/W Path Driver S/W State H/W Type Description
    • Assigning Ultra Narrow Single-Ended SCSI Device IDs
      • Assigning Ultra Narrow Single-Ended SCSI Device IDs
      • You can determine which Ultra Narrow Single-Ended SCSI (NSE SCSI) devices are currently in use by...
        • You can determine which Ultra Narrow Single-Ended SCSI (NSE SCSI) devices are currently in use by...
        • Here is the break down of the hardware path:
        • SCSI device  10/0/15/
        • NSE SCSI 
        • SCSI ID 2  
      • CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont...
        • CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont...
    • Assigning Ultra2 Wide Low-Voltage Differential SCSI Device IDs
      • Assigning Ultra2 Wide Low-Voltage Differential SCSI Device IDs
      • You can determine which Ultra2 Wide Low-Voltage Differential SCSI (LVD SCSI) devices are currentl...
        • You can determine which Ultra2 Wide Low-Voltage Differential SCSI (LVD SCSI) devices are currentl...
        • SCSI device 10/0/15/1.5.0
        • LVD SCSI 10/0/15/1.5.0
        • SCSI ID 5 10/0/15/1.5.0
      • CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont...
        • CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont...
  • SCSI:connecting to the ports,
    • SCSI:connecting to the ports,
      • SCSI:connecting to the ports,
    • This section describes how to connect to the system SCSI ports (Ultra Narrow Single-Ended and Ult...
    • System SCSI Port Connection
      • System SCSI Port Connection
      • The system contains two SCSI connectors:
      • • Ultra Narrow, Single-Ended SCSI (NSE SCSI) connector
        • • Ultra Narrow, Single-Ended SCSI (NSE SCSI) connector
          • • Ultra Narrow, Single-Ended SCSI (NSE SCSI) connector
        • • Ultra2 Wide Low-Voltage Differential SCSI (LVD SCSI) connector
      • Figure B-1 shows the two SCSI connectors. SCSI cables connect to these ports with a high-density ...
      • FigureB1. SCSI Ports
        • FigureB1. SCSI Ports
          • FigureB1. SCSI Ports
          • <GRAPHIC>
      • NOTE It is necessary to put a terminator on unused SCSI connectors on the rear panel, or the last...
        • NOTE It is necessary to put a terminator on unused SCSI connectors on the rear panel, or the last...
• Reference documentation:
  • Reference documentation:
    • Reference documentation:
  • This appendix provides part numbers and titles to related documentation.
    • This appendix provides part numbers and titles to related documentation.
    • Installation Manual
      • Installation Manual
      • • A4985-90010 -
        • • A4985-90010 -
          • • A4985-90010 -
    • Service Manuals
      • Service Manuals
      • • A4985-90039 - Service Handbook , HP Visualize Workstations, Model B Class and C Class (this ha...
        • • A4985-90039 - Service Handbook , HP Visualize Workstations, Model B Class and C Class (this ha...
          • • A4985-90039 - Service Handbook , HP Visualize Workstations, Model B Class and C Class (this ha...
            • • A4985-90039 - Service Handbook , HP Visualize Workstations, Model B Class and C Class (this ha...
        • • B2355-90040 - System Administration Tasks Manual HP 9000 Series 700
          • • B2355-90040 - System Administration Tasks Manual HP 9000 Series 700
        • • B3782-90176 -
          • • B3782-90176 -
        • • A4033-90099 - HP A4032/A4033 Color Monitors CE Handbook
          • • A4033-90099 - HP A4032/A4033 Color Monitors CE Handbook
            • • A4033-90099 - HP A4032/A4033 Color Monitors CE Handbook
    • Reference Manuals
      • Reference Manuals
      • • A4985-90013 -
        • • A4985-90013 -
          • • A4985-90013 -
• Glossary
  • Glossary
  • A
    • A
    • absolute pathname
      • absolute pathname
      • The full pathname of a file, including all the directories leading to it, starting with the root ...
        • The full pathname of a file, including all the directories leading to it, starting with the root ...
        • See also file, filename, pathname.
    • access permissions
      • access permissions
      • Settings that allow (or prevents) a user or group of users to read, write, or execute files
        • Settings that allow (or prevents) a user or group of users to read, write, or execute files
        • See also file access permissions.
    • active window
      • active window
      • The window that is receiving input from the keyboard at the present time. If there is no active w...
        • The window that is receiving input from the keyboard at the present time. If there is no active w...
    • ANSI
      • ANSI
      • The American National Standards Institute, a non-profit organization, made up of various expert c...
        • The American National Standards Institute, a non-profit organization, made up of various expert c...
    • argument
      • argument
      • A part of a command line or line of source code that identifies the file, directory, or other dat...
        • A part of a command line or line of source code that identifies the file, directory, or other dat...
    • attachment unit interface (AUI)
      • attachment unit interface (AUI)
      • A transceiver cable that conforms to IEEE 802.3 specifications.
        • A transceiver cable that conforms to IEEE 802.3 specifications.
  • B
    • B
    • back up
      • back up
      • v. To make a copy of one or more files on a tape or disk that can be stored separately from the o...
        • v. To make a copy of one or more files on a tape or disk that can be stored separately from the o...
    • backup
      • backup
      • n. A spare copy of one or more files on a tape or disk that can be used to restore data into its ...
        • n. A spare copy of one or more files on a tape or disk that can be used to restore data into its ...
    • bitmap
      • bitmap
      • Generally speaking, an array of data bits that define a graphical image. Strictly speaking, a bit...
        • Generally speaking, an array of data bits that define a graphical image. Strictly speaking, a bit...
    • boot
      • boot
      • Short for “bootstrap,” from the phrase “pulling oneself up by one’s bootstraps.” Indicates the be...
        • Short for “bootstrap,” from the phrase “pulling oneself up by one’s bootstraps.” Indicates the be...
    • boot console handler
      • boot console handler
      • The interactive firmware that enables you to interact with the hardware of your workstation befor...
        • The interactive firmware that enables you to interact with the hardware of your workstation befor...
    • boot ROM
      • boot ROM
      • A read-only memory that is incorporated into a workstation for the purpose of loading and startin...
        • A read-only memory that is incorporated into a workstation for the purpose of loading and startin...
    • bootstrap service
      • bootstrap service
        • See boot.
    • byte
      • byte
      • A fundamental character-code unit, usually consisting of 8 bits.
        • A fundamental character-code unit, usually consisting of 8 bits.
  • C
    • C
    • CD-RAM
      • CD-RAM
      • Compact Disk Random-Access Memory.
        • Compact Disk Random-Access Memory.
        • See also CD-RAM disk, CD-RAM drive.
    • CD-RAM disk
      • CD-RAM disk
      • CD-RAM disks are identical to the audio compact disks (CDs) used to record stereo music, except c...
        • CD-RAM disks are identical to the audio compact disks (CDs) used to record stereo music, except c...
    • CD-RAM drive
      • CD-RAM drive
      • A random-access, read/write, mass-storage device that uses removable CD-RAM disks. The drive cont...
        • A random-access, read/write, mass-storage device that uses removable CD-RAM disks. The drive cont...
    • CD-ROM
      • CD-ROM
      • Compact Disk Read-Only Memory.
        • Compact Disk Read-Only Memory.
        • See also CD-ROM disk, CD-ROM drive.
    • CD-ROM disk
      • CD-ROM disk
      • CD-ROM disks are identical to the audio compact disks (CDs) used to record stereo music, except t...
        • CD-ROM disks are identical to the audio compact disks (CDs) used to record stereo music, except t...
    • CD-ROM drive
      • CD-ROM drive
      • A random-access, read-only, mass-storage device that uses removable CD-ROM disks. The drive conta...
        • A random-access, read-only, mass-storage device that uses removable CD-ROM disks. The drive conta...
    • Central Processing Unit (CPU)
      • Central Processing Unit (CPU)
      • The part of a workstation that interprets and executes instructions; the “brain.”
        • The part of a workstation that interprets and executes instructions; the “brain.”
    • child directory
      • child directory
        • See subdirectory.
    • click
      • click
      • To press and immediately release a mouse button. The term comes from the fact that pressing and r...
        • To press and immediately release a mouse button. The term comes from the fact that pressing and r...
    • cluster
      • cluster
      • A group of workstations connected via a Local Area Network (LAN). One workstation, the cluster se...
        • A group of workstations connected via a Local Area Network (LAN). One workstation, the cluster se...
        • See also cluster client, cluster node, cluster server.
    • cluster client.
      • cluster client.
      • A cluster node that does not have a local HP-UX file system. Its file system resides on the clust...
        • A cluster node that does not have a local HP-UX file system. Its file system resides on the clust...
        • See also cluster, cluster node, cluster server.
    • cluster node
      • cluster node
      • A member of a group of workstations connected via a Local Area Network (LAN). One workstation, th...
        • A member of a group of workstations connected via a Local Area Network (LAN). One workstation, th...
        • See also cluster, cluster client, cluster server.
    • cluster server
      • cluster server
      • A workstation that provides file access, login access, file transfer, printing, and other service...
        • A workstation that provides file access, login access, file transfer, printing, and other service...
        • See also cluster, cluster client, cluster node, host.
    • cold install.
      • cold install.
      • A process that requires the booting of an install kernel from an install server over a network or...
        • A process that requires the booting of an install kernel from an install server over a network or...
    • command.
      • command.
      • An instruction that you enter into the system at a prompt, to execute a program or perform a task.
        • An instruction that you enter into the system at a prompt, to execute a program or perform a task.
        • See also shell command.
    • command argument
      • command argument
      • Information you provide on a command line to describe the object (often a file or directory) to b...
        • Information you provide on a command line to describe the object (often a file or directory) to b...
    • command interpreter
      • command interpreter
      • A program that reads lines of text from standard input (typed at the keyboard or read from a file...
        • A program that reads lines of text from standard input (typed at the keyboard or read from a file...
        • See also shell.
    • command option
      • command option
      • Information you provide on a command line to indicate any special action you want the command to ...
        • Information you provide on a command line to indicate any special action you want the command to ...
        • See also default.
    • configuration
      • configuration
      • The arrangement of a workstation or network as defined by the nature, number, and chief character...
        • The arrangement of a workstation or network as defined by the nature, number, and chief character...
    • console.
      • console.
      • The tty (terminal) the system was booted from. The console is associated with the monitor where a...
        • The tty (terminal) the system was booted from. The console is associated with the monitor where a...
    • control key sequence
      • control key sequence
      • A keystroke combination used as a shorthand way of specifying commands. To enter a control key se...
        • A keystroke combination used as a shorthand way of specifying commands. To enter a control key se...
    • cpu
      • cpu
        • See Central Processing Unit.
    • current directory
      • current directory
        • See current working directory.
    • current session
      • current session
      • The work and processes that have been created since you logged into the system (and before you lo...
        • The work and processes that have been created since you logged into the system (and before you lo...
        • See also session.
    • current working directory
      • current working directory
      • The directory from which a relative-pathname search begins, as well as the directory in which you...
        • The directory from which a relative-pathname search begins, as well as the directory in which you...
    • cursor
      • cursor
      • The small, usually blinking, box or underline displayed in whatever screen or window is active at...
        • The small, usually blinking, box or underline displayed in whatever screen or window is active at...
  • D
    • D
    • daisy-chaining
      • daisy-chaining
      • A method of connecting devices in which the signal passes from one device to the next in serial f...
        • A method of connecting devices in which the signal passes from one device to the next in serial f...
    • DDS tape drive
      • DDS tape drive
      • A device that stores data on Digital Data Storage (DDS) cassettes.
        • A device that stores data on Digital Data Storage (DDS) cassettes.
    • default
      • default
      • Most commands give you a choice of one or more options. If you don’t specify an option, the comma...
        • Most commands give you a choice of one or more options. If you don’t specify an option, the comma...
        • See also command option.
    • dialog box
      • dialog box
      • A special type of HP CDE screen that contains controls and settings, and with which the user can ...
        • A special type of HP CDE screen that contains controls and settings, and with which the user can ...
    • DIMM
      • DIMM
        • See Dual In-line Memory Module.
    • Dual In-line Memory Module
      • Dual In-line Memory Module
      • A memory board whose connectors on each side of the board are connected to different chips. This ...
        • A memory board whose connectors on each side of the board are connected to different chips. This ...
    • directory
      • directory
      • A special type of “container” object that contains information about the objects beneath it in th...
        • A special type of “container” object that contains information about the objects beneath it in th...
        • See also file.
    • disk
      • disk
      • A thin, round plate with a magnetic or optical surface coating on which data is stored by magneti...
        • A thin, round plate with a magnetic or optical surface coating on which data is stored by magneti...
    • disked workstation
      • disked workstation
      • A workstation that has its own hard disk drive.
        • A workstation that has its own hard disk drive.
    • diskette
      • diskette
        • See floppy diskette.
    • double click
      • double click
      • To press and release a mouse button twice in rapid succession. The amount of time that discrimina...
        • To press and release a mouse button twice in rapid succession. The amount of time that discrimina...
    • drag
      • drag
      • To move the mouse (and hence the pointer on the screen) while holding down one or more of its but...
        • To move the mouse (and hence the pointer on the screen) while holding down one or more of its but...
        • See also drop.
    • drive
      • drive
        • See CD-ROM drive, DDS tape drive, floppy drive, hard disk drive
    • drop
      • drop
      • To release the mouse button after having moved the mouse with its button held down, in order to p...
        • To release the mouse button after having moved the mouse with its button held down, in order to p...
        • See also drag.
  • E
    • E
    • EEPROM.
      • EEPROM.
      • Electronically erasable read-only memory. Usually bytes or words can be erased and reprogrammed i...
        • Electronically erasable read-only memory. Usually bytes or words can be erased and reprogrammed i...
    • environment
      • environment
      • The conditions in which your commands or programs are executed. These conditions include your wor...
        • The conditions in which your commands or programs are executed. These conditions include your wor...
        • See also environment variables.
    • environment variables
      • environment variables
      • The set of defined shell variables (some of which are PATH, TERM, SHELL, EXINIT, and HOME) that d...
        • The set of defined shell variables (some of which are PATH, TERM, SHELL, EXINIT, and HOME) that d...
        • See also environment.
    • Ethernet
      • Ethernet
      • The LAN developed jointly by Digital Equipment Corporation, Intel, and Xerox Corporation, upon wh...
        • The LAN developed jointly by Digital Equipment Corporation, Intel, and Xerox Corporation, upon wh...
  • F
    • F
    • Fast Narrow Single-Ended SCSI
      • Fast Narrow Single-Ended SCSI
      • An 8-bit-wide SCSI bus with standard receivers and drivers that runs at 20 Mbytes/second, which a...
        • An 8-bit-wide SCSI bus with standard receivers and drivers that runs at 20 Mbytes/second, which a...
        • See also Ultra2 Wide Low-Voltage Differential SCSI, Small Computer System Interface.
    • file
      • file
      • The basic named unit of data stored on disk
        • The basic named unit of data stored on disk
        • See also directory, filename.
    • file access permissions
      • file access permissions
      • The access rights given to a particular file or directory. Every file and directory has a set of ...
        • The access rights given to a particular file or directory. Every file and directory has a set of ...
        • See also access permissions.
    • File Manager
      • File Manager
      • The HP CDE application that allows you to manage your files and directories, and to set viewing p...
        • The HP CDE application that allows you to manage your files and directories, and to set viewing p...
    • filename
      • filename
      • The name given to a particular file
        • The name given to a particular file
        • See also absolute pathname, file, pathname.
    • file server
      • file server
      • A workstation whose primary task is to control the storage and retrieval of data from hard disks....
        • A workstation whose primary task is to control the storage and retrieval of data from hard disks....
    • file system
      • file system
      • The hierarchically organized set of files and directories on a hard disk.
        • The hierarchically organized set of files and directories on a hard disk.
    • firmware
      • firmware
      • The control software that is embedded in ROM and is always resident regardless of the status of t...
        • The control software that is embedded in ROM and is always resident regardless of the status of t...
    • floppy diskette
      • floppy diskette
      • A thin, flexible, disk-shaped sheet of plastic that magnetically stores data on its coated surfac...
        • A thin, flexible, disk-shaped sheet of plastic that magnetically stores data on its coated surfac...
    • floppy drive
      • floppy drive
      • A device that stores data on a floppy diskette.
        • A device that stores data on a floppy diskette.
  • H
    • H
    • hard disk
      • hard disk
      • A type of disk that is rigid—often aluminum—as opposed to a thin plastic diskette, which is flexi...
        • A type of disk that is rigid—often aluminum—as opposed to a thin plastic diskette, which is flexi...
    • hard disk drive
      • hard disk drive
      • A device that stores data on a hard disk. The hard disk can be a permanent part of the drive and ...
        • A device that stores data on a hard disk. The hard disk can be a permanent part of the drive and ...
    • Help Manager
      • Help Manager
      • The HP CDE application that provides online help.
        • The HP CDE application that provides online help.
    • $HOME
      • $HOME
      • The environment variable that contains the name of a user’s home directory. This is the directory...
        • The environment variable that contains the name of a user’s home directory. This is the directory...
        • See also home directory.
    • home directory
      • home directory
      • A shorthand way of referring to a frequently used directory, almost always the login directory.
        • A shorthand way of referring to a frequently used directory, almost always the login directory.
    • host
      • host
      • A computer that offers one or more services; may be local or remote (accessible via a network)
        • A computer that offers one or more services; may be local or remote (accessible via a network)
        • See also cluster server.
    • host name
      • host name
        • See internet protocol address.
    • HP CDE
      • HP CDE
        • See HP Common Desktop Environment.
    • HP Common Desktop Environment
      • HP Common Desktop Environment
      • A user interface that draws a graphical layer over the complexities of the other layers of the sy...
        • A user interface that draws a graphical layer over the complexities of the other layers of the sy...
    • HP-UX.
      • HP-UX.
      • This is Hewlett-Packard’s version of the UNIX® operating system.
        • This is Hewlett-Packard’s version of the UNIX® operating system.
    • HP-UX cluster
      • HP-UX cluster
        • See cluster node, cluster server.
  • I
    • I
    • icon
      • icon
      • A small, graphic representation of an object. Objects can be “iconized” (turned into icons) to cl...
        • A small, graphic representation of an object. Objects can be “iconized” (turned into icons) to cl...
    • iconify
      • iconify
        • See iconize.
    • iconize
      • iconize
      • To turn a window or shell into an icon
        • To turn a window or shell into an icon
        • See also icon.
    • Initial System Loader
      • Initial System Loader
      • The program that actually controls the loading of the operating system.
        • The program that actually controls the loading of the operating system.
    • input device
      • input device
      • Any of several pieces of hardware equipment used to give information to a system. Examples includ...
        • Any of several pieces of hardware equipment used to give information to a system. Examples includ...
        • See also output device.
    • input window
      • input window
      • The window that displays a program’s prompt and any commands typed but not yet executed.
        • The window that displays a program’s prompt and any commands typed but not yet executed.
    • Instant Ignition.
      • Instant Ignition.
      • When the user’s computer is turned on and it automatically boots up and is ready for use. Instant...
        • When the user’s computer is turned on and it automatically boots up and is ready for use. Instant...
    • install server.
      • install server.
      • This is a networked computer from which file sets and operating systems can be installed.
        • This is a networked computer from which file sets and operating systems can be installed.
    • internet protocol address (IP address)
      • internet protocol address (IP address)
      • A string of characters, in the format nnn.nnn.nnn.nnn, that uniquely identifies a workstation in ...
        • A string of characters, in the format nnn.nnn.nnn.nnn, that uniquely identifies a workstation in ...
    • invisible filename
      • invisible filename
      • A filename in which the first character is a period (.). Invisible filenames are not displayed by...
        • A filename in which the first character is a period (.). Invisible filenames are not displayed by...
    • IP address
      • IP address
        • See internet protocol address.
    • ISL
      • ISL
        • See Initial System Loader.
  • K-L
    • K-L
    • kernel
      • kernel
      • The part of the operating system that is an executable piece of code responsible for managing the...
        • The part of the operating system that is an executable piece of code responsible for managing the...
    • LAN
      • LAN
        • See local area network.
    • LAN station address
      • LAN station address
        • See local area network station address.
    • link
      • link
      • n. A special object that contains the name of another object. When you specify a link as a pathna...
        • n. A special object that contains the name of another object. When you specify a link as a pathna...
    • local area network (LAN)
      • local area network (LAN)
      • A data communications system that allows a number of independent devices to communicate with each...
        • A data communications system that allows a number of independent devices to communicate with each...
    • local area network system address
      • local area network system address
      • The label that uniquely identifies the local area network (LAN) connection for your workstation a...
        • The label that uniquely identifies the local area network (LAN) connection for your workstation a...
    • log in
      • log in
      • v. To initially sign on to the system so that you may begin to use it. This creates your first us...
        • v. To initially sign on to the system so that you may begin to use it. This creates your first us...
    • login
      • login
      • n. A session. Or, a string of characters that uniquely identifies a user of the system
        • n. A session. Or, a string of characters that uniquely identifies a user of the system
        • See also session, user account, and username.
    • login directory
      • login directory
      • The directory in which you are placed when you log in, usually your home directory
        • The directory in which you are placed when you log in, usually your home directory
        • See also home directory.
    • Login Manager
      • Login Manager
      • The program that controls the initial startup of HP CDE and accepts the user’s username and password
        • The program that controls the initial startup of HP CDE and accepts the user’s username and password
    • login script
      • login script
      • The shell program that runs at each login, and sets the login environment for your system.
        • The shell program that runs at each login, and sets the login environment for your system.
  • M
    • M
    • menu bar
      • menu bar
      • An area at the top or bottom of a window that contain the titles of the pull-down or pop-up menus...
        • An area at the top or bottom of a window that contain the titles of the pull-down or pop-up menus...
    • minimize button
      • minimize button
      • In HP CDE, a push-button on the window frame that turns a screen into an icon.
        • In HP CDE, a push-button on the window frame that turns a screen into an icon.
        • See also icon, iconize.
    • monitor type.
      • monitor type.
      • A monitor path name (graphics(1) through graphics(6)) that is associated with a particular resolu...
        • A monitor path name (graphics(1) through graphics(6)) that is associated with a particular resolu...
    • mouse pointer
      • mouse pointer
        • See pointer.
  • N
    • N
    • name
      • name
      • A character string associated with a file, directory, or link. A name can include various alphanu...
        • A character string associated with a file, directory, or link. A name can include various alphanu...
        • See also pathname.
    • network
      • network
      • Two or more workstations sharing information
        • Two or more workstations sharing information
        • See also cluster, workstation.
    • network controller
      • network controller
      • A printed circuit board that passes bit streams between the network and the main memory of the wo...
        • A printed circuit board that passes bit streams between the network and the main memory of the wo...
    • node
      • node
      • A computer that is on a network. Each node in the network can use the data, programs, and devices...
        • A computer that is on a network. Each node in the network can use the data, programs, and devices...
        • See also disked workstation, diskless workstation, workstation.
    • node name
      • node name
      • A unique identifying name given to a workstation in a cluster
        • A unique identifying name given to a workstation in a cluster
        • See also cluster, node.
    • nonvolatile memory
      • nonvolatile memory
      • System memory that retains its contents even after workstation power is turned off.
        • System memory that retains its contents even after workstation power is turned off.
  • O
    • O
    • object
      • object
      • Any file, directory, or link in the network. See also directory, file, link, pathname.
        • Any file, directory, or link in the network. See also directory, file, link, pathname.
    • operating system
      • operating system
      • The program that supervises the execution of other programs on your workstation. For example, the...
        • The program that supervises the execution of other programs on your workstation. For example, the...
        • See also kernel.
    • option
      • option
        • See command option.
    • output device
      • output device
      • Any of several pieces of hardware used for receiving messages from the computer and storing them,...
        • Any of several pieces of hardware used for receiving messages from the computer and storing them,...
        • See also input device.
    • output window
      • output window
      • The window that displays a process response to your command.
        • The window that displays a process response to your command.
  • P
    • P
    • parent directory
      • parent directory
      • A directory that contains other directories, each of which is then called a subdirectory
        • A directory that contains other directories, each of which is then called a subdirectory
        • See also subdirectory.
    • password
      • password
      • The secret word you enter next to the password prompt at login time to permit only authorized acc...
        • The secret word you enter next to the password prompt at login time to permit only authorized acc...
        • See also user account.
    • path
      • path
      • The hardware address of a device that is attached to the I/O system of your workstation.
        • The hardware address of a device that is attached to the I/O system of your workstation.
    • pathname
      • pathname
      • A slash/separated series of zero or more directory names followed by a filename, that together de...
        • A slash/separated series of zero or more directory names followed by a filename, that together de...
        • See also name, object.
    • permissions
      • permissions
      • A set of rights (read, write, execute) associated with an object in the file system. Determines w...
        • A set of rights (read, write, execute) associated with an object in the file system. Determines w...
    • PID
      • PID
      • Process Identifier. Also referred to as a process ID
        • Process Identifier. Also referred to as a process ID
        • See also process ID.
    • PIM.
      • PIM.
      • Processor Internal Memory. The pim command is a command used by the Boot Console Interface for de...
        • Processor Internal Memory. The pim command is a command used by the Boot Console Interface for de...
        • See also processor internal memory.
    • pointer
      • pointer
      • Sometimes called the “mouse pointer,” the pointer’s location on the display corresponds to the mo...
        • Sometimes called the “mouse pointer,” the pointer’s location on the display corresponds to the mo...
    • process
      • process
      • A computing environment in which you may execute programs; a program currently running in the sys...
        • A computing environment in which you may execute programs; a program currently running in the sys...
    • process ID
      • process ID
      • A unique identification number assigned to all processes by the operating system. Also referred t...
        • A unique identification number assigned to all processes by the operating system. Also referred t...
        • See also PID.
    • processor internal memory.
      • processor internal memory.
      • A storage area in a processor (for example, EEPROM) that is set at the time of a high-priority ma...
        • A storage area in a processor (for example, EEPROM) that is set at the time of a high-priority ma...
    • program.
      • program.
      • A unit of executable code, in source-code or binary form. Most HP-UX commands and routines consis...
        • A unit of executable code, in source-code or binary form. Most HP-UX commands and routines consis...
    • prompt
      • prompt
      • A message or symbol displayed by the system to let you know that it is ready for your input.
        • A message or symbol displayed by the system to let you know that it is ready for your input.
    • push button
      • push button
      • A graphic control that simulates a real-life push button. Use the pointer and mouse to push the b...
        • A graphic control that simulates a real-life push button. Use the pointer and mouse to push the b...
  • R-S
    • R-S
    • RAM
      • RAM
      • Random-access memory.
        • Random-access memory.
    • ROM
      • ROM
      • Read-only memory.
        • Read-only memory.
    • root
      • root
        • See superuser.
    • scroll bar
      • scroll bar
      • A vertical or horizontal bar located on the side or bottom of a window that allows the user to vi...
        • A vertical or horizontal bar located on the side or bottom of a window that allows the user to vi...
    • SCSI
      • SCSI
        • See Small Computer System Interface.
    • SCSI ID.
      • SCSI ID.
      • The address of a peripheral device connected to a SCSI bus.
        • The address of a peripheral device connected to a SCSI bus.
    • server
      • server
      • A program that controls all access to input and output devices.
        • A program that controls all access to input and output devices.
    • session
      • session
      • The time between when you log in and when you log out. Also called a “work session” or a “login s...
        • The time between when you log in and when you log out. Also called a “work session” or a “login s...
        • See also current session.
    • shell
      • shell
      • A command-line interpreter program used to invoke programs. Some examples of HP-UX shells are the...
        • A command-line interpreter program used to invoke programs. Some examples of HP-UX shells are the...
        • See also command interpreter.
    • shell command
      • shell command
      • An instruction you give the system to execute a utility program or shell script
        • An instruction you give the system to execute a utility program or shell script
        • See also shell script, utility program.
    • shell script
      • shell script
      • A file that contains commands that the system can interpret and run in a shell.
        • A file that contains commands that the system can interpret and run in a shell.
    • shutdown
      • shutdown
      • The process of taking the system from multi-user state to system administration state.
        • The process of taking the system from multi-user state to system administration state.
    • slider
      • slider
      • One of the components of a scroll bar. The slider is the object that is dragged along the scroll ...
        • One of the components of a scroll bar. The slider is the object that is dragged along the scroll ...
    • Small Computer System Interface (SCSI)
      • Small Computer System Interface (SCSI)
      • An IEEE standard for interfacing a computer to multiple, disparate high-speed peripherals such as...
        • An IEEE standard for interfacing a computer to multiple, disparate high-speed peripherals such as...
        • See also Ultra2 Wide Low-Voltage Differential SCSI, Fast Narrow Single-Ended SCSI.
    • SPA.
      • SPA.
      • Soft Physical Address.
        • Soft Physical Address.
        • See also soft physical address.
    • soft physical address.
      • soft physical address.
      • This is a location in system memory associated with the DIMM cards.
        • This is a location in system memory associated with the DIMM cards.
    • standalone
      • standalone
      • A workstation that is not part of a cluster
        • A workstation that is not part of a cluster
        • See also cluster.
    • Style Manager
      • Style Manager
      • The HP CDE application that provides the ability to customize various user-interface aspects of y...
        • The HP CDE application that provides the ability to customize various user-interface aspects of y...
    • subdirectory
      • subdirectory
      • A directory that is located in, or anywhere on a path below, another directory. The directory abo...
        • A directory that is located in, or anywhere on a path below, another directory. The directory abo...
        • See also parent directory.
    • superuser
      • superuser
      • A user with permission to enter any directory and make changes to files and programs that typical...
        • A user with permission to enter any directory and make changes to files and programs that typical...
    • system administrator
      • system administrator
      • The person responsible for system and network installation, updating, maintenance, and security a...
        • The person responsible for system and network installation, updating, maintenance, and security a...
    • system call
      • system call
      • Invocation of a kernel process by a user program.
        • Invocation of a kernel process by a user program.
    • system name
      • system name
        • See internet protocol address.
  • T-U
    • T-U
    • terminal window
      • terminal window
      • A terminal window is a type of HP CDE window that emulates a complete display terminal. Terminal ...
        • A terminal window is a type of HP CDE window that emulates a complete display terminal. Terminal ...
        • See also HP Common Desktop Environment.
    • title bar
      • title bar
      • The rectangular area, between the top of the window and the window frame, that contains the title...
        • The rectangular area, between the top of the window and the window frame, that contains the title...
    • TOC.
      • TOC.
        • See transfer of control.
    • transceiver
      • transceiver
      • A device that transmits and receives signals.
        • A device that transmits and receives signals.
    • transfer of control.
      • transfer of control.
      • Saves the state of the processor in Processor Internal Memory (PIM) and pending I/O operations ar...
        • Saves the state of the processor in Processor Internal Memory (PIM) and pending I/O operations ar...
    • Ultra2 Wide Low-Voltage Differential SCSI
      • Ultra2 Wide Low-Voltage Differential SCSI
      • A 16-bit-wide bus with low-power receivers and drivers, which allows a cable length of up to 12 m...
        • A 16-bit-wide bus with low-power receivers and drivers, which allows a cable length of up to 12 m...
        • See also Fast Narrow Single-Ended SCSI, Small Computer System Interface.
    • user account
      • user account
      • The system administrator defines a user account for every person authorized to use the system. Ea...
        • The system administrator defines a user account for every person authorized to use the system. Ea...
        • See also user ID, password.
    • user ID
      • user ID
      • The name the computer uses to identify you. Your system administrator assigns you a user ID. Ente...
        • The name the computer uses to identify you. Your system administrator assigns you a user ID. Ente...
        • See also user account.
    • username
      • username
      • The name that the system recognizes as uniquely yours. Also known as your “login name.” The usern...
        • The name that the system recognizes as uniquely yours. Also known as your “login name.” The usern...
    • utility
      • utility
        • See utility program.
    • utility program
      • utility program
      • A program provided with the operating system to perform a frequently required task, such as print...
        • A program provided with the operating system to perform a frequently required task, such as print...
        • See also command, shell command.
  • W
    • W
    • window
      • window
      • A rectangular area of the screen for viewing information. HP CDE allows you to create several typ...
        • A rectangular area of the screen for viewing information. HP CDE allows you to create several typ...
        • See also Workspace Manager.
    • Window Manager
      • Window Manager
      • The HP CDE program that controls the size, placement, and operation of windows.
        • The HP CDE program that controls the size, placement, and operation of windows.
    • working directory
      • working directory
        • See current working directory.
    • Workspace
      • Workspace
      • What the screen becomes when you start HP CDE. Although you can hide the workspace under terminal...
        • What the screen becomes when you start HP CDE. Although you can hide the workspace under terminal...
        • See also HP Common Desktop Environment, terminal window.
    • Workspace Manager
      • Workspace Manager
      • The program that controls the size, placement, and operation of windows on the HP CDE Workspace. ...
        • The program that controls the size, placement, and operation of windows on the HP CDE Workspace. ...
        • See also Window Manager.
    • workstation
      • workstation
      • A compact, graphics-oriented computer having high speed and high memory capacity. A workstation u...
        • A compact, graphics-oriented computer having high speed and high memory capacity. A workstation u...
        • See also node, disked workstation, diskless workstation.
          • Symbols
          • A
          • B
          • C
          • D
          • E
          • F
          • H
          • I
          • K
          • L
          • M
          • N
          • O
          • P
          • R
          • S
          • T
          • U