HQT Science and Technology TH-368V Two Way Radio User Manual TH 368

Download:
Mirror Download [FCC.gov]
Document ID	2443721
Application ID	obofizRG+9wTCQ3fZQ0Lrw==
Document Description	Users Manual Part One
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	268.46kB (3355761 bits)
Date Submitted	2014-11-13 00:00:00
Date Available	2014-11-13 00:00:00
Creation Date	2014-11-13 18:20:14
Producing Software	Corel PDF Engine Version 14.0.0.653
Document Lastmod	2014-11-13 18:20:14
Document Title	TH-368
Document Creator	CorelDRAW
Document Author:	Administrator

@Har
User Manual
T H-368
Pm/essmna/ Two-way Rama
@1107
SHENZHEN HOT SCIENCE G- TECHNOLOGY 60., LTD.
For more informafion, please vwsil http://www.ilqt-lech‘com‘
Allnghu mum H01 l’muru:ahuwnmth:manualArcfmyouncfcrcncc
only‘ my, Hunlunhun‘ guarding m the mm “mm, Must
Welcome
Thank you for your purchasev We are confident that the function and
quality will bring you stable, reliable, and clear communication. Please
read this manual bclbrc operating the radio.
- Ergonomic & Light Design
' 16 Channels
I LED Indicator Light
0 Voice Prompts
0 VOX
0 TimeroutrTimcr
0 Scan
I CTCSS/DCS
o Programmable Key
0 Auto Battery Save
0 Wired Cloning
- PC Programming
Table of Contents
Safety Information. .. .. ,, .,
Product Inspection
Getting Started
Attaching & Removing
Radio Overview
Basic Operation. . . . . ..
Advanced Operation
Monitor
Battery Power Check
CTCSS & DCS
Busy Channel Lockout V... .. V ..
D'I'MF Encode
>02
04
05
06
08
10
12
13
l3
l3
13
Voice Prompts
TOT
Sq ueleh
VOX
Scan
Low Power Alert
Battery Saving . . .. . . ,.
Wired Clone
Optional Accessories
Trouble Shooting
Care and Maintenance
--14
,.14
14
14
.14
15
15
r~19
Warranty Statement ........................... 20
Table of Contents
Appendix 1: Specification ”.22 Safety Information
Pleas: mad [he {nunwing safely guidelinss, Nunobssrvancs nr lhssc guidelines may cause danger or
violation oflaw,
Wmmg
Appendix 11: Technical Terms .. .. .. ..23
WII'mrIK
\Vammg
WII'mIIK
\Vnnnng
War-mug
WW
Table ot‘Conlents
Safety Information
- FCC RF EXPOSURE COMPLlANCE REQUIREMENTS FOR OCCUPATIONAL USE ONLY
The Federal Communlmthns Cummlsslun (Fccii wiin lie actmn in General Docket 93762, November 7, 1997, has
adopted a safety standard ier human expesure ie Radie Fleqsency (RH elemamagnellc energy erniiied by FCC
regulated equipment Proper epeiauen or we radie will reeuli in user exposure lar eelew llie oeeupailenal saiely and
Health Am (OSHA) and Federal Communicahurls eernrnissien limiis
‘ DO NOT lmnsrnil far more inan 50% uhatal radia use lime (50% duty cycle) Trarsmimng rnore inan 507. eiirie
urns an cause FCC RF exposure dumplianee requirements id be exceeded.
. This radio is NOT approved ier use by the general population in an uncontrolled eniiironmeni This radio is restricted
to mparienal use, walk related dperaiiens enly wiiere radie operator rnusi have me knowledge id ednirel iiie user's
exposuie eendiiiens lor seiisiying ine nigner exposure iirnii allowed ipr oeeupauenai use
. wneri uansmllilng, hold lne radie in a yenical pesiiipn wrin its mierepripne i inen (2 50m) away from your mouth
- The radio is orensm’mine when he red LED en irie neni ei ine radio is illuminated vau can cause lne radie lo transm'n
by press'ng ine Prr eer on irie radie
. These are required operating eenneuraiiens lor meeeng FCC RF ewesure eemplianee Failure in ubsalve inese
iesiiieiions meen ineiauen
Caution
Any Changes or me Ilcatlons not expressly approved by ine party responsible ler compliance ceuld
veid user‘s auindriiyie dperaie the equlpment
This deuice complies Wiin part is mine FCC Rules Operation is subiectla lne iellennng iwe pendiiiens
(1 ) Tnis device may noi cause narrnlul inieriereneei end (2) this device rnusi accepi any inierierenee
received including interference inai may cause undesired eperaiion
Product Inspection
Thanks for choosing the HQT Til-368 Series radios Before use, please check that the following
contents are included:
Items
Radio iii-m Anreuna LIrIun ballcry
Qty 1 Qly’ 1 Qly: l
Mahler Bell Clip with screws Lanyard Srrap User Manual
Qty: ' Qty 1 Qiy i Qty, i
For any damage or lost contents. please cenraci your Authorwed llQT Dealer,
l3. Note: For antenna ideniincniion, the frequency is marked on iiie color circle ai iire bmlom ol‘lhc nniennn,
Safety Information
Product Inspection
Getting Started Attaching & Removing Attaching & Removing the Belt Clip
Charging the Battery Attaching & Removing the Battery Tn attach the heltchp, secure the heir clip with
1‘ ‘h h‘b ‘ f 11 . I For Aluchmg, shde the buttery up (mm the bottom the 2_ 9mm valded (Phillips head “WWW“
P wsc L are“ a may as o 0w; “um ;. locks “may in“, Mm (mm 1) required). To remove, reverse the screws and the
LTum ofitlig'ad\o for ommum chdrtzvvg ‘ belt clip can be removed. (figurCS). Note: thc bclt
2.Plug the AL conncclcr otthe ndapmr mm an Ac Ll lo~240v) outlet. 2_ Bcfom ,cmcvmg, mks gch the mate ts turned my clip docs “0‘ new to be ”moved m (move [he
3.1mm the battery or rad“) equipped w! 1h battery into the charger Fer remuvul, push the huttery luck .qu slide the huttery h It
- Red LED mdiczlcs bancry rs charging Green LED mdicalcs charging a: complete. downwards (figure 2) “ ”Y
~ The buttery u nm charged a! the (ht-tery.
(figure ll (figure 2)
Getting Started
Attaching 81. Removing
Attaching & Removing the Antenna
1. To attach» inscn Ihc antenna inlo Ihc connector on
the top of the radio by holding the antenna at its hase
and rotate the antenna clockwise to fasten it. (figure
4) IMPORTANT: Do not over tighten antenna as
it will cause damage to the radio.
2. To remove, hold the antenna at its base and rotate
the antenna counter clockwise until you can remove
it. (figure 5)
(figure 5)
Attaching Extemal Audio Accessories
l>ull down the cover of earphone/microphone jack
and insert the correct audio accessory into the jack
Please make sure that the proper audio accessory is
being used and that it is properly seated in the jack.
{figure 6)
(figum o)
Radio Overview
©®®
:27
Attaching & Removing
Radio Overview
0 Antenna
Antenna witli screwed connector is required tor
proper transmll and receive ofradio.
8 Channel Selector
Rotate clockwise or counter clockwise to select
operating channel.
0 Power SwitchNolume Control
Rotate the knob clockwise until a click sounds to
turn on the radio, Keep turning clockwise to increase
Volume. Tum counter clockwise to decrease volume,
Keep rotating counter clockwise until a click
sounds to turn off radio.
0 LED Indicator
LED glows red during transmitting; glows green
during receiving; flashes red when battery power
is insufficient; flashes green during seaming.
9 Speaker/Microphone
0 Push-To-Talk (PTT)
Press PTT key to transmit; release it to receive.
0 Programmable Keys
Default ortop button provides condition
of battery power and low button is monitor
function.
0 Audio Jack/Data Port
0 Li-Ion Battery
01!? Belt Clip
0 Strap Hole
Basic Operation
1. Turn On/Off
Turn on the rnttto by rotating Power Switch/Volume
Conlrol knob clockwise unlll a click is sounded.
Turn otrtne radio by rotating Power Switch/Volume
Control knob counter clockwise until a click is
sounded.
2 Adjust Volume
Rotate Power SwitehNolurne Control knob lo adjust
volume when the radio Is on
)nlc: the volunic can also be adiusrert in accordance wtrn
background noise during monitoring
Radio Overview
é Advanced Operation
§ 3. Channel Selection 4 Make a Call Cemin functions can be made possible through
8‘ Rotate the channel knob to selecl opemlng channel To make a call, press PTT key and speak mm the Pr°gmmm‘“gfwflmmflpmgflmmd by 3“ Aul'mmd
o from 1716 or(l5+Scan), aceordlng to rhe numbers and microphone with a normal volee. Keep Ihe radio/ TECNC‘DWI"
g symbols on the beam of channel selector knob or microphone area 2"(5 cm)away from yourmoulh
m channel annuncialion, PC Programming
1, Turn off Ihe mdlo and connecl me programming
5 Receive a Call cahle belween rhe radio and PC (See figure 7)
Calls can be received when PTT is released and Ihe 2' For the setllng of paramelers and writlng to the
rale is In slandby mode, radio, please Iefer to the Help documents of the
software
Programming Cable (optional)
(figure 7)
Basic Operation
Advanced Operation
Monitoring
lThe reeeiving stems of the sclmrcd channel ean be
checked by a long press or the side hutton located
below rhe P'l’l‘ (programmable key). l‘his allows the
squelch to ripen on the radio so any received audin
can he heard Dcfaulr Mede Press and held of the
monitor button for up to 2 seconds to monitor the
channel for activity.
2 when this function is on, the volume can he sdjusred
wilh the Vulumc Conlrol
Battery Power Check
lxlhe battery level/condition can he checked by a short
press ol’ the side hutton leeated helew the PTT
(programniahle keyh Default Viode: Press
momenrary and release The radio will announce the
power level as high hattcry power", “bancry middle
power", “low bancry power" or "please chargc".
2:lhis innetien is disahleihenahled rhrough the
prngriimming sortware (derault is on)
CTCSS/DCS
l,erh (his function, users can receive calls in
corresponding channels only with the same
crassmcs; wnhout this tiinction, users can receive
calling from all corresponding channels using the
same frequency
2,-rhis funcllon is disabled/enabled through the
programming setiwarc
Busy Channel Lockout (BCL)
i. when liCl. is activarcds ir prohibits transmitting
on the channel il' occupied hy other users This is
indicated by an audio alarm when pressing the
PTT.
2, When the channel bccm'ncs unoccupied, users can
rcsumclalk.
3. This funclicn is disabled/enabled rhrough rhe
programming soriware (derault is oil)
DTMF Encode
l.'lhls function is disabled/enabled through the
programming snrtwaire (default is till)
2 Ir enabled, users can send DTMF code at starl m the
end oflransmlsslcu.
Voice Prompts
LChnnricl Voice: the radio would repen the channel
inrormaiinn when you change the channel.
zinw rower Prnmpl the radio would repon low
battery informarien when rhe vclrage reaches the
minimum upernling vulmge
3,5ean Dpcmliun Prompt the radio would report the
inroimatinn when the channel sets ro the designated
scanning channel
4.’l‘hcsc prcmpts can he disahled/enahled through the
programming suilware
Time Out Timer (TOT)
l. The TOT runetion prevents extended peneds of
nansmi ng, which can cause possible damage to the
circuilry oirhe radio,
2, If rransmirting oecurs longer rhau the set ume, the
riidin will strip |ran\mllllng and an alarm ivill \uuml
Cease pressing the FIT Prcss PT'l again to resume
lransn-itlung
z,Detault is lso seconds. The time durniien can he
changed through the programming scflwarct
Squelch Levels
i.Through adjusting squelch level, the radio with a
lower squelch level allows weak signals to he
received
ZDcfault level is A. levels can he changed through the
programmmg soiiware, which ranges rrom 079.
When you choose 0, the squelch is open Higher
numbers tighten the squelch reducing rhe noise and
Interference.
VOX
wox ean he enabled to transmit withoui pressing the
FIT key when rhe voice siiamal is transmirted through
the microphone or the who
2,This runelion is disahied/enahled through lhe
prognmmlng sefrware (default is off).
Scan
1 [his funcnou is disabled/enabled through The
programming senware (defaull is rim
2 When the \Caln runclitin is enabled. channel 16
becomes the scan channel. l'hc LED flashes green
and lite radio will scan these channels assigned lo
scan. [fa signal is received. Llic iadlc will cease
Advanced Opererion

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2014:11:13 18:20:14+08:00
Create Date                     : 2014:11:13 18:20:14+08:00
Metadata Date                   : 2014:11:13 18:20:14+08:00
Creator Tool                    : CorelDRAW
Format                          : application/pdf
Title                           : TH-368
Creator                         : Administrator
Document ID                     : uuid:9c6d751a-f3dc-47d3-aecd-095d284d60f4
Instance ID                     : uuid:c40d710b-138e-45f9-a53e-cacac9810e18
Producer                        : Corel PDF Engine Version 14.0.0.653
Page Count                      : 10
Author                          : Administrator

EXIF Metadata provided by EXIF.tools