HTC 2PR8100 Base station User Manual Safety Guide

HTC Corporation Base station Safety Guide

Contents

Safety Guide

Safety and   regulatory guide            The health and safety warnings in this guide are periodically updated for accuracy and completeness.   Check www.htcvive.com for the latest version.
2  ImportantImportantImportantImportant Safety InformatSafety InformatSafety InformatSafety Information ion ion ion ––––    Read Before UseRead Before UseRead Before UseRead Before Use    Read the following warnings and information before use of the Read the following warnings and information before use of the Read the following warnings and information before use of the Read the following warnings and information before use of the product and follow all product safety and operating instructions. product and follow all product safety and operating instructions. product and follow all product safety and operating instructions. product and follow all product safety and operating instructions. Failure to do so may cause bodily injury, electric shock, fire, and Failure to do so may cause bodily injury, electric shock, fire, and Failure to do so may cause bodily injury, electric shock, fire, and Failure to do so may cause bodily injury, electric shock, fire, and other damagother damagother damagother damage.e.e.e.  Ensure You Are Able to Ensure You Are Able to Ensure You Are Able to Ensure You Are Able to Safely Use the ProdcutSafely Use the ProdcutSafely Use the ProdcutSafely Use the Prodcut    Consult your doctor before using the product if you have pre-existing serious medical conditions (such as a heart ailment), conditions that affect your ability to safely perform physical activities, psychiatric conditions (such as anxiety disorders or post-traumatic stress disorder), or if you are pregnant or elderly.    Do not use the product if you are sick, fatigued, under the influence of intoxicants/drugs, or are not feeling generally well, as it may exacerbate your condition.     EnEnEnEnsure the Area Around You is Safe for Use of the Productsure the Area Around You is Safe for Use of the Productsure the Area Around You is Safe for Use of the Productsure the Area Around You is Safe for Use of the Product    While wearing the product’s headset you are blind to the world around you. The image displayed in the headset will not match the real world. Always use the product in a clear and safe area. Do not rely on the product’s chaperone system for protection. Do not use near stairways, large windows, heat sources, or outdoors. Clear the play area of people, furniture, and other things that may be obstacles or block you from freely moving around. For example, if a pet comes into the room while you are using the product, you likely will not be aware of the pet’s presence and you could trip over your pet while moving in the virtual reality environment.       It is recommended that the product be used only while under the supervision of another person who is ready to warn of hazards that may arise while the product is being used.    Examples of hazards that could arise include, but are not limited to, tangling of a cable in a manner that presents a tripping hazard, pets entering the area where the product is being used, and the user walking too close to a wall or another hazard).
3  Be Aware of the Cable and ConnectionsBe Aware of the Cable and ConnectionsBe Aware of the Cable and ConnectionsBe Aware of the Cable and Connections    Keep in mind the location of the cable and connections running from the headset so that you are not likely to trip over or pull on them while moving around or walking around the play area. Move your feet slowly and carefully to avoid tripping, including on the cable. Make sure to maintain good footing. Tripping over the cable or contacting obstacles could cause injury or damage.     Take Care of the ControllersTake Care of the ControllersTake Care of the ControllersTake Care of the Controllers    While using the hand controllers, always check that you have sufficient overhead and surrounding clearance to allow you to fully extend your arms outward and upwards. Hitting persons or objects may cause injury or damage. Hold the controllers firmly and always use the wrist straps. If released while using, the controller may cause injury or damage.     Photosensitive SeizuresPhotosensitive SeizuresPhotosensitive SeizuresPhotosensitive Seizures    Like other products that produce visual effects (including light flashes), the product may trigger epileptic seizures, seizures, fainting, or severe dizziness even in people who have no history of these conditions. If you have a previous history of epilepsy or seizures, loss of awareness, or other symptoms linked to an epileptic condition, consult your doctor before using the product. To reduce the likelihood of a seizure do not use the product if you are tired or need sleep.  Repetitive Stress InjuriesRepetitive Stress InjuriesRepetitive Stress InjuriesRepetitive Stress Injuries    Operate the product in a comfortable posture. Do not grip the product too tightly. Press the buttons lightly. If you have tingling, numbness, stiffness, throbbing, or other discomfort, immediately stop using the product and consult your doctor.    PhysicalPhysicalPhysicalPhysical    and Pand Pand Pand Psychological sychological sychological sychological EEEEffectsffectsffectsffects         Content viewed using the product can be intense, immersive, and appear very life-like and may cause your brain and body to react
4  accordingly. Certain types of content (e.g. violent, scary, emotional, or adrenaline-based content) could trigger increased heart rate, spikes in blood pressure, panic attacks, anxiety, PTSD, fainting, and other adverse effects. If you have a history of negative physical or psychological reactions to certain real life circumstances, avoid using the product to view similar content.    Similarly, it is important to remember that simulated objects, such as furniture, that may be encountered while using the product do not exist in the real world, and injuries may result when interacting with those simulated objects as if they were real, for example, by attempting to sit down on a virtual chair.    Hearing Loss Hearing Loss Hearing Loss Hearing Loss      Do not use the earphones at a high volume for prolonged periods of time, or permanent hearing loss may occur.       Radio Frequency Interference Radio Frequency Interference Radio Frequency Interference Radio Frequency Interference      The product can emit radio waves that can interfere with the operation of nearby electronic devices. If you have a cardiac pacemaker or other implanted medical device, do not use the product until you have consulted with your doctor or the manufacturer of your medical device. To minimize radio frequency interference, use only original manufacturer-approved accessories, or accessories that do not contain any metal. Use of non-original manufacturer-approved accessories may violate your local radio frequency exposure guidelines and should be avoided.     Avoid Overuse Avoid Overuse Avoid Overuse Avoid Overuse      Prolonged, uninterrupted use of the product should be avoided. It may negatively impact hand-eye coordination, balance, and/or cause other negative effects.   While using the product frequently and for prolonged periods of time, you may experience tiredness or soreness in your muscles, joints, or other body parts. Take regular breaks from
5  using the product. The length and frequency of necessary breaks may vary from person to person.       Stop Using If You Experience Any Discomfort Stop Using If You Experience Any Discomfort Stop Using If You Experience Any Discomfort Stop Using If You Experience Any Discomfort      Stop using the product and consult your doctor if you experience any of the following symptoms:   Seizures, loss of awareness, convulsions, involuntary movements, dizziness, disorientation, nausea, lightheadedness, drowsiness, or fatigue;  Eye pain or discomfort, eyestrain, eye twitching, or vision abnormalities (such as altered, blurred, or double vision);  Excessive sweating, increased salivation, impaired sense of balance, impaired hand-eye coordination, or other symptoms similar to motion sickness.     Until fully recovered from these symptoms, do not drive, operate machinery, or take part in activities that may have potentially serious consequences.  Before resuming use of the product, make sure that it is properly configured.    The type of content you were using may cause your symptoms. Continuing to use such content may make you prone to experiencing the same symptoms.     Use by Children Use by Children Use by Children Use by Children      The product was not designed to be used by children. Do not leave the product within the reach of young children or allow them to use or play with it. They could hurt themselves or others, or could accidentally damage the product.    The product may contain small parts with sharp edges that may cause an injury or which could become detached and create a choking hazard
6  for young children. Consult your doctor immediately if any parts of the product or accessories are swallowed.     If older children are permitted to use the product, then adults should monitor them closely for any negative effects during and after their use of the product. Do not allow older children to use the product if negative effects are observed. Adults should also ensure that older children avoid prolonged use of the product.        General Use and Maintenance InstructionsGeneral Use and Maintenance InstructionsGeneral Use and Maintenance InstructionsGeneral Use and Maintenance Instructions  Electrical safety   This product is intended for use when supplied with power from the designated batteries or power supply units. Other usage may be dangerous and will invalidate any approval given to this product.  Safety precautions for proper grounding installation CAUTION: Connecting to improperly grounded equipment can result in electrical damage to the product. This product is equipped with cables for connecting with a desktop computer. Be sure your computer is properly grounded (earthed) before connecting the product to the computer. The power supply cord of a desktop computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances.  Safety precautions for power supply unit  Use the correct external power source • A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources,
7  refer to the operating instructions that are included with the product.  • This product should be operated only with the following designated power supply unit(s).   Vive headset AC adapter: HTC, Model TC NE18W-US Vive controller AC adapter: HTC, Model TC NE5W-US Base stations AC adapter: HTC, Model TC NE30W-US     Handle battery packs carefully The product controller contains a lithium-ion polymer or lithium-ion battery. There is a risk of fire and burns if the battery pack is handled improperly.      Vive controller WARNING: To reduce risk of fire or burns, do not disassemble, crush, puncture, short external contacts or circuits, expose to temperature above 60° C (140° F), or dispose of in fire or water. Recycle or dispose of used batteries according to the local regulations or reference guide supplied with your product.   Do not expose to liquid.    Keep batteries out of the reach of children.  Avoid dropping the product headset, controllers, or base stations.   If dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.  If the battery leaks:  Do not allow the leaking fluid to come in contact with skin or clothing. If already in contact, flush the affected area immediately with clean water and seek medical advice.    Do not allow the leaking fluid to come in contact with eyes. If already in contact, DO NOT rub; rinse with clean water immediately and seek medical advice.   Take extra precautions to keep a leaking battery away from fire as there is a danger of ignition or explosion.
8  Safety precautions for direct sunlight Keep the product away from excessive moisture and extreme temperatures. Do not leave the product in places such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. The headset contains lenses which may focus and intensify bright light sources, causing damage to the hardware.  Prevention of hearing loss  CAUTION: Permanent hearing loss may occur if Vive headset earphones are used at high volume for prolonged periods of time. Vive headset have been tested to comply with the Sound Pressure Level requirement laid down in the applicable EN 50332-1and/or EN 50332-2 standards.  General precautions  Protect the product. •  When installing base stations, avoid using unstable mounting accessories or surfaces that are prone to vibration, movement or chance of impact.   • A secure structure must support the weight or load of the base stations. • Do not install near a heater, fireplace, direct sunlight, air conditioning unit or other source of direct energy. • Do not attempt to pry open the base stations as it could result in injury. • Use only approved accessories. • Do not connect with incompatible products or accessories. • Do not attempt to disassemble this product or its accessories. • Use only qualified personnel to service or repair this product and its accessories.  • Always treat the product and its accessories with care and keep them in a clean and dust-free place. • Do not expose the product or its accessories to open flames or
9  lit smoking products. • Do not drop, throw or try to bend the product or its accessories. • Do not use harsh chemicals, cleaning solvents, liquid cleansers or aerosols to clean the product or its accessories. • Do not paint the product or its accessories. • Store the product and its accessories at temperatures between 0°C to 40°C • Please check local regulations for disposal of electronic products  Damage requiring service. Contact an authorized service technician or provider under the following conditions:  The product has been damaged by exposure to liquid, dropped, subject to impact or damaged.  There are noticeable signs of overheating.  The product does not operate normally when you follow the operating instructions.  Avoid hot areas. The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.  Avoid using the product after a dramatic change in temperature. When you move the product between environments with very different temperature and/or humidity ranges, condensation may form on or within the product. To avoid damaging the product, allow sufficient time for the moisture to evaporate before using the product. NOTICE: When taking the product from low-temperature conditions into a warmer environment or from high-temperature conditions into a cooler environment, allow the product to acclimate to room temperature before turning on power.  Avoid pushing objects into the product. Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.  Adjust the volume. Turn down the volume before using headphones or other audio devices.
10   Cleaning the product. Unplug the product from its power source before cleaning. Use a damp cloth for cleaning, but NEVER use water to clean the product. Clean and dry skin that regularly comes in contact with the headset. If there is any itching, eczema, swelling, irritation of the skin, or you experience any discomfort, please discontinue use and consult your physician.  About Vive headset regulatory agency identifications For regulatory identification purposes, your product is assigned a model number of 0PJT100.   Your product’s FCC ID is NM80PJT100. This FCC ID can also be found printed on the Vive headset. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your 0PJT100. NOTE: This product is intended for use with a certified Class 2 Limited Power Source, rated 12 Volts DC, maximum 1.5 Amp power supply unit.  About Vive controller regulatory agency identifications For regulatory identification purposes, your product is assigned a model number of 2PR7100.   Your product’s FCC ID is NM82PR7100. This FCC ID can also be found printed on the Vive controller. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your 2PR7100:   The Battery Pack has been assigned a model number of B0PLH100. THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE DEVICE OUT OF THE BOX. NOTE: This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit. RRRRF exposure:F exposure:F exposure:F exposure:    To comply with the IC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
11  Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet appareil et son antenne ne doivent pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur.    About Base station regulatory agency identifications For regulatory identification purposes, your product is assigned a model number of 2PR8100.   Your product’s FCC ID is NM82PR8100. This FCC ID can also be found printed on the Base station. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your 2PR8100:   NOTE: This product is intended for use with a certified Class 2 Limited Power Source, rated 12 Volts DC, maximum 2.5 Amp power supply unit. This is a Class 1 laser device.   This product contains Class 3B laser, which can produce hazardous level of Class 3B and 4 laser radiations. However, the design of this product incorporates optics, a protective housing and scanning safeguard such that  there  is  no  access  to  level  of  laser  radiation  above  Class  1.  Only trained factory service personnel should open the protective housing.   CAUTION- Class 3B LASER RADIATION WHEN OPEN   AVOID EXPOSURE TO THE BEAM. The  laser  beams  are  located  inside  the front face of Base station as indicated at right. CAUTION: Use of controls or adjustments or performance of procedures other than those  specified  herein  may  result  in hazardous radiation exposure.
12   Status light  Protective housing  Laser beams Location of the labels on the product:    If this product is not working properly, please call HTC customer service for instruction. CAUTION: The product is not intended to be serviced except by HTC or our authorized service providers.    FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
13  IC RF Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.  About Link box regulatory agency identifications For regulatory identification purposes, your product is assigned a model number of 2PU6100.   Your product’s FCC ID is NM82PU6100. This FCC ID can also be found printed on the Link box. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your 2PU6100:   NOTE: This product is intended for use with a certified Class 2 Limited Power Source, rated 12 Volts DC, maximum 1.5 Amp power supply unit.  FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
14  IC RF Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.  Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio or television technician for help.
15  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement   This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement."  European Union notice   This device complies with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community. We declare under our sole responsibility that our product and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 55022/24, , EN 301 489-1 -17, EN62471, EN 60950-1,EN 62479   EN 300 328 following the provisions of, radio equipment and telecommunication terminal equipment directive 1999/5/EC.
16  WEEE notice The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.   The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal.    The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.  RoHS compliance This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.  CEC Appliance Efficiency Compliance The BC logo (shown at the left) indicates that this product complies with the California Energy Commission (CEC) energy efficiency standards for battery charger systems set
17  forth at California Code of Regulations Title 20, Sections 1601 through 1608.  Proprietary Notice © 2015 HTC Corporation. All rights reserved. HTC, the HTC logo, and all other HTC product and service names are the trademarks or registered trademarks in the U.S. and/or other countries of HTC Corporation and its affiliates.
18                                    91H0XXXX-XXM Rev.A htc.com

Navigation menu