HTC 2PZC100 Smartphone User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3389466
Application ID	sR9NY83Q+JgFVGB1EvhFAw==
Document Description	User Manual-2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.11kB (326343 bits)
Date Submitted	2017-05-14 00:00:00
Date Available	2017-11-14 00:00:00
Creation Date	2017-05-09 16:32:42
Producing Software	doPDF Ver 7.3 Build 382 (Windows XP Professional Edition (SP 3) - Version: 5.1.2600 (x86))
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual-2

Safety and
regulatory guide
Please read before proceeding
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE
DEVICE OUT OF THE BOX.
Privacy restrictions
Some countries require full disclosure of recorded telephone
conversations.
Pictograms and graphic symbols
Read this manual’s
Safety Information
and General
Precautions.
Do not use while
re-fuelling
Do not use
hand-held while
driving
This device may
produce a bright or
flashing light
For body-worn
operation maintain a
separation of 1.5 cm
Do not dispose of in
a fire
Small parts may
cause a choking
hazard
Avoid contact with
magnetic media
This device may
produce a loud
sound
Avoid extreme
temperatures
Keep away from
pacemakers and
other personal
medical devices
Avoid contact with
liquid, keep dry
Switch off when
instructed in
hospitals and
medical facilities
Do not try and
disassemble
Switch off when
instructed in aircraft
and airports
Do not rely on this
device for
emergency
communications
Switch off in
explosive
environments
Only use approved
accessories
Important health information and safety precautions
When using this product, the safety precautions below must be taken
to avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to
the equipment, observe the following precautions.
Electrical safety
This product is intended for use when supplied with power from the
designated battery or power supply unit. Other usage may be
dangerous and will invalidate any approval given to this product.
Safety precautions for proper grounding installation
CAUTION: Connecting to improperly grounded equipment can result
in an electric shock to your device.
This product is equipped with a USB Cable for connecting with
desktop or notebook computer. Be sure your computer is properly
grounded (earthed) before connecting this product to the computer.
The power supply cord of a desktop or notebook computer has an
equipment-grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet which is properly installed and
grounded in accordance with all local codes and ordinances.
Safety precautions for power supply unit
 Use the correct external power source
A product should be operated only from the type of power source
indicated on the electrical ratings label. If you are not sure of the
type of power source required, consult your authorized service
provider or local power company. For a product that operates from
battery power or other sources, refer to the operating instructions
that are included with the product.
This product should be operated only with the following designated
power supply unit(s).
AC adapter:
HTC, Model TC P5000-US, TC P5000-EU, TC P5000-UK,
TC P5000-AU, TC P5000-IN, TC P5000-CN
 Handle battery packs carefully
This product contains a Lithium-ion polymer or Lithium-ion battery.
There is a risk of fire and burns if the battery pack is handled
improperly. Do not attempt to open or service the battery pack. Do
not disassemble, crush, puncture, short external contacts or circuits,
dispose of in fire or water, or expose a battery pack to temperatures
higher than 60˚C (140˚F).
WARNING: To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external
contacts, expose to temperature above 60° C
(140° F), or dispose of in fire or water. Recycle or
dispose of used batteries according to the local
regulations or reference guide supplied with your
product.
 Take extra precautions
 Keep the device dry and away from water or any liquid as it may
cause a short circuit.
 The phone should only be connected to products that bear the
USB-IF logo or have completed the USB-IF compliance program.
 If the battery leaks:
 Do not allow the leaking fluid to come in contact with skin or
clothing. If already in contact, flush the affected area immediately
with clean water and seek medical advice.
 Do not allow the leaking fluid to come in contact with eyes. If
already in contact, DO NOT rub; rinse with clean water
immediately and seek medical advice.
 Take extra precautions to keep a leaking battery away from fire as
there is a danger of ignition or explosion.
Safety precautions for direct sunlight
Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product inside a vehicle or in places
where the temperature may exceed 60°C (140°F), such as on a car
dashboard, window sill, or behind a glass that is exposed to direct
sunlight or strong ultraviolet light for extended periods of time. This
may damage the product, overheat the battery, or pose a risk to the
vehicle.
Prevention of hearing loss
CAUTION: Permanent hearing loss may occur
if earphones or headphones are used at high
volume for prolonged periods of time.
This device and earphone have been tested to comply with the Sound
Pressure Level requirement laid down in the applicable EN 50332-1
and/or EN 50332-2 standards.
Safety in aircraft
Due to the possible interference caused by this product to an aircraft’s
navigation system and its communications network, using this device’s
phone function on board an airplane is against the law in most
countries. If you want to use this device when on board an aircraft,
remember to turn off your phone by switching to Airplane Mode.
Environment restrictions
Do not use this product in gas stations, fuel depots, chemical plants or
where blasting operations are in progress, or in potentially explosive
atmospheres such as fuelling areas, fuel storehouses, below deck on
boats, chemical plants, fuel or chemical transfer or storage facilities,
and areas where the air contains chemicals or particles, such as grain,
dust, or metal powders. Please be aware that sparks in such areas
could cause an explosion or fire resulting in bodily injury or even death.
Explosive atmospheres
When in any area with a potentially explosive atmosphere or where
flammable materials exist, the product should be turned off and the
user should obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death. Users
are advised not to use the equipment at refueling points such as
service or gas stations, and are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots, chemical
plants, or where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always, clearly
marked. These include fueling areas, below deck on boats, fuel or
chemical transfer or storage facilities, and areas where the air contains
chemicals or particles, such as grain, dust, or metal powders.
Road safety
Full attention must be given to driving at all times in order to reduce
the risk of an accident. Using a phone while driving (even with a hands
free kit) causes distraction and can lead to an accident. You must
comply with local laws and regulations restricting the use of wireless
devices while driving.
Safety precautions for RF exposure
 Avoid using your phone near metal structures (for example, the steel
frame of a building).
 Avoid using your phone near strong electromagnetic sources, such
as microwave ovens, sound speakers, TV and radio.
 Use only original manufacturer-approved accessories, or accessories
that do not contain any metal.
 Use of non-original manufacturer-approved accessories may violate
your local RF exposure guidelines and should be avoided.
Interference with medical equipment functions
This product may cause medical equipment to malfunction. The
use of this device is forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer
of your device to determine if they are adequately shielded from
external RF energy. Your physician may be able to assist you in
obtaining this information.
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to external RF
energy.
Hearing aids
Some digital wireless phones may interfere with some hearing aids. In
the event of such interference, you may want to consult your service
provider, or call the customer service line to discuss alternatives.
Electrical safety
 Accessories
 Use only approved accessories.
 Do not connect with incompatible products or accessories.
 Connection to a car
Seek professional advice when connecting a phone interface to the
vehicle electrical system.
 Faulty and damaged products
 Do not attempt to disassemble the phone or its accessory.
 Only qualified personnel must service or repair the phone or its
accessory.
General precautions
You alone are responsible for how you use your phone and any
consequences of its use. You must always switch off your phone
wherever the use of a phone is prohibited. Use of your phone is subject
to safety measures designed to protect users and their environment.
 Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device to
prevent damaging them and remove the device from your pants’
pocket before sitting down. It is also recommended that you store
the device in a protective case and only use the device stylus or your
finger when interacting with the touch screen. Cracked display
screens due to improper handling are not covered by the warranty.
 Protect your phone
 Always treat your phone and its accessories with care and keep
them in a clean and dust-free place.
 Do not expose your phone or its accessories to open flames or lit
tobacco products.
 Do not drop, throw or try to bend your phone or its accessories.
 Do not use harsh chemicals, cleaning solvents, or aerosols to clean
the device or its accessories.
 Do not paint your phone or its accessories.
 Do not attempt to disassemble your phone or its accessories, only
authorised personnel must do so.
 Store your phone or its accessories at temperatures between 0° C
to 40° C.
 Please check local regulations for disposal of electronic products.
 Do not carry your phone in your back pocket as it could break
when you sit down.
 Damage requiring service
Unplug the product from the electrical outlet and refer servicing to
an authorized service technician or provider under the following
conditions:
 The product has been exposed to rain or liquid, dropped, subject
to impact or damaged.
 There are noticeable signs of overheating.
 The product does not operate normally when you follow the
operating instructions.
 Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
 Avoid wet areas
Never use the product in rain, or near washbasins or other wet or
high humidity locations. If your product gets wet, do not try to dry
the product with the use of an oven or dryer, as this may damage
your product.
 Avoid using your device after a dramatic change in temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation may







form on or within the device. To avoid damaging the device, allow
sufficient time for the moisture to evaporate before using the device.
NOTICE: When taking the device from low-temperature conditions
into a warmer environment or from high-temperature conditions into
a cooler environment, allow the device to acclimate to room
temperature before turning on power.
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings
in the product. Slots and openings are provided for ventilation. These
openings must not be blocked or covered.
Adjust the volume
Turn down the volume before using headphones or other audio
devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but
NEVER use water to clean the LCD screen.
Small children
Do not leave your phone and its accessories within the reach of small
children or allow them to play with it. They could hurt themselves or
others, or could accidentally damage the phone. Your phone
contains small parts with sharp edges that may cause an injury or
which could become detached and create a choking hazard. Consult
the doctor immediately if the accessories or battery are swallowed.
Repetitive motion injuries
To minimise the risk of RSI, when Texting or playing games with your
phone:
 Do not grip the phone too tightly
 Press the buttons lightly
Electrostatic discharge (ESD)
Do not touch the SIM card’s metal connectors.
Emergency calls
This phone, like any wireless phone, operates using radio signals,
which cannot guarantee connection in all conditions. Therefore, you
must never rely solely on any wireless phone for emergency
communications.
Regulatory agency identifications
For regulatory identification purposes, your product is assigned a
model number of 2PZC100.
FCC ID: NM82PZC100
To view your FCC ID in your device you may also go to the Settings
menu  About Phone  Legal Information  Regulatory.
To ensure continued reliable and safe operation of your device, use
only the accessories listed below with your 2PZC100.
The Battery Pack has been assigned a model number of B2PZC100.
Operating temperature range: 32 °F to 104 °F (0 °C to 40 °C)
European Union notice
Products with CE marking comply with the Radio Equipment Directive
(2014/53/EU) issued by the Commission of the European Community.
This radio equipment operates with the following frequency bands and
maximum radio-frequency power:
Maximum Tune-up Conducted Power (dBm)
GSM 900: 32.5
GSM 1800: 29.5
WCDMA Band VIII: 23.5
WCDMA Band I: 23.5
LTE Band 1: 23.0
LTE Band 3: 23.0
LTE Babd 7: 23.0
LTE Band 8: 23.0
LTE Band 20: 23.0
LTE Band 28: 23.0
LTE Band 38: 23.0
LTE Band 40: 23.0
802.11 b: 18.5
802.11 g: 16.5
802.11 n HT20 (2.4GHz): 16.5
802.11 n HT40 (2.4GHz): 16.5
802.11 a: 16.5
802.11 n HT20 (5GHz): 16.5
802.11 n HT40 (5GHz): 16.5
802.11 ac: 16.5
Bluetooth: 12.0
ANT+: -2.01
NFC 13.56 MHz:-14.15dBuA/m at 10m.
The operation of 5.15-5.35GHz is restricted to indoor use in all EU
Member States.
Federal Communications Commission notice
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or TV reception, which can be
determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
 Consult the dealer or an experienced radio or television technician
for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to the device that are not expressly approved by
HTC Corporation may void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement
 This Transmitter has been demonstrated co-location compliance
requirements with Bluetooth and WLAN.
 This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
 This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment.
Exposure to Radio Frequency Energy
Your wireless device has an internal antenna that emits radio
frequency (RF) energy. Human exposure to RF energy has been and
continues to be the subject of scientific research. According to the U.S.
Food and Drug Administration (FDA), “the weight of scientific
evidence has not linked cell phones with any health problems.” You can
access this FDA publication and other information on human exposure
to RF energy at:
U.S. Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/RadiationEmittingProduc
tsandProcedures/HomeBusinessandEntertainment/CellPhones/ucm116282.
htm
Federal Communications Commission:
http://www.fcc.gov/encyclopedia/radio-frequency-safety
NIH National Institute of Environmental Health Sciences:
http://www.niehs.nih.gov/health/topics/agents/cellphones/
World Health Organization:
http://www.who.int/mediacentre/factsheets/fs193/en/
IEEE Committee on Man and Radiation:
http://ewh.ieee.org/soc/embs/comar/
International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de/
Specific Absorption Rate (SAR) Testing
Your device has been designed to comply with applicable limits for RF
exposure. These limits use a unit of measurement called Specific
Absorption Rate, or SAR, which refers to the rate at which the body
absorbs RF energy. The Federal Communications Commission (FCC)
has established a SAR limit for mobile phones of 1.6 W/kg, which
applies in the United States and other countries that follow the FCC’s
SAR limit. This limit is based upon standards developed by expert
non-government organizations, such as the Institute of Electrical and
Electronics Engineers (IEEE) and the National Council on Radiation
Protection and Measurements (NCRP), and input from other federal
agencies such as the FDA and EPA. In countries that follow the Council
of the European Union, the SAR limit is 2.0 W/kg.
SAR testing is conducted with the device placed in common operating
positions (e.g., held against the head, worn on the body) and
transmitting at its highest certified power level in each frequency band
of operation. Because the device is transmitting at its highest certified
power level, SAR tests capture a worst-case operating scenario and
therefore often do not reflect the amount of RF exposure during
normal, everyday use. More information on SAR testing is available on
the FCC’s website at
http://www.fcc.gov/guides/wireless-devices-and-health-concerns.
HTC Corp. submitted SAR test results demonstrating compliance with
the FCC’s SAR limit for wireless devices as part of the FCC’s equipment
certification process for this device. These results can be accessed via
the FCC’s equipment authorization database (found at
https://www.fcc.gov/fccid) by searching for the device’s FCC ID:
NM82PZC100.This device’s maximum SAR values as reported to the
FCC are:
SAR information
Head: 0.45 W/kg@10g (CE), 1.06 W/kg@1g (FCC)
Body: 0.60 W/kg@10g (CE), 0.64 W/kg@1g (FCC)
Body-worn Operation
This device was tested for typical body-worn operations. A minimum
separation distance must be maintained between the user’s body and
the handset, including the antenna:
 0.5 cm to comply with the RF exposure requirements in Europe
 1 cm to comply with the RF exposure requirements in the U.S.
Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply with
RF exposure requirements and should be avoided.
Use only the supplied or an approved antenna. Unauthorized antennas,
modifications, or attachments could impair call quality, damage the
phone, or result in violation of regulations. Do not use the phone with a
damaged antenna. If a damaged antenna comes into contact with the
skin, a minor burn may result. Please contact your local dealer for
replacement antenna.
Hereby, HTC Corporation declares that the radio equipment type,
2PZC100 is the compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet
address: http://www.htc.com/doc
Telecommunications & Internet Association (TIA) safety
information
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of 15 cm (6 inches) be maintained between a
handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations of
Wireless Technology Research.
Persons with pacemakers:
 Should ALWAYS keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is turned ON.
 Should not carry the phone in a breast pocket.
 Should use the ear opposite the pacemaker to minimize the potential
for interference. If you have any reason to suspect that interference
is taking place, turn the phone OFF immediately.
WEEE notice
The Directive on Waste Electrical and Electronic Equipment (WEEE),
which entered into force as European law on 13th February 2003,
resulted in a major change in the treatment of electrical equipment at
end-of-life.
The purpose of this Directive is, as a first priority, the prevention of
WEEE, and in addition, to promote the reuse, recycling and other
forms of recovery of such wastes so as to reduce disposal.
The WEEE logo (shown at the left) on the product or
on its box indicates that this product must not be
discarded in a landfill. Electronic devices contain
substances that may be hazardous to the
environment if not properly disposed of. For more
information about electronic and electrical waste
equipment disposal, recovery, and collection points,
please contact your local city center, household
waste disposal service, shop from where you
purchased the equipment, or manufacturer of the
equipment.
RoHS compliance
This product is in compliance with Directive 2011/65/EU of the
European Parliament and of the Council of 8 June 2011, on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS) and its amendments.
htc.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 13
Page Layout                     : OneColumn
Page Mode                       : UseNone
Producer                        : doPDF Ver 7.3 Build 382 (Windows XP Professional Edition  (SP 3) - Version: 5.1.2600 (x86))
Create Date                     : 2017:05:09 16:32:42+08:00

EXIF Metadata provided by EXIF.tools