HTC 601HT Smartphone User Manual safety statement

HTC Corporation Smartphone safety statement

User manual safety statement

Download: HTC 601HT Smartphone User Manual safety statement
Mirror Download [FCC.gov]HTC 601HT Smartphone User Manual safety statement
Document ID3395156
Application ID1HO4H/PWKe9KY6p75KLQ/w==
Document DescriptionUser manual safety statement
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.9kB (311292 bits)
Date Submitted2017-05-18 00:00:00
Date Available2017-11-16 00:00:00
Creation Date2017-05-10 13:40:08
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2017-05-10 13:45:11
Document TitleUser manual safety statement
Document CreatorMicrosoft® Office Word 2007

Safety and
regulatory guide
2 Safety and regulatory guide
Please read before proceeding
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE
DEVICE OUT OF THE BOX.
Privacy restrictions
Some countries require full disclosure of recorded telephone
conversations.
Pictograms and graphic symbols
Read this manual’s
Safety Information
and General
Precautions.
Do not use while
re-fuelling
Do not use hand-held
while driving
This device may
produce a bright or
flashing light
For body-worn
operation maintain a
separation of 1.5 cm
Do not dispose of in a
fire
Small parts may
cause a choking
hazard
Avoid contact with
magnetic media
This device may
produce a loud sound
Avoid extreme
temperatures
Keep away from
pacemakers and
other personal
medical devices
Avoid contact with
liquid, keep dry
Switch off when
instructed in hospitals
and medical facilities
Do not try and
disassemble
Switch off when
instructed in aircraft
and airports
Do not rely on this
device for emergency
communications
Safety and regulatory guide
Switch off in explosive
environments
Only use approved
accessories
Important health information and safety precautions
When using this product, the safety precautions below must be taken to
avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions. Observe all
warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the
equipment, observe the following precautions.
Electrical safety
This product is intended for use when supplied with power from the
designated battery or power supply unit. Other usage may be dangerous
and will invalidate any approval given to this product.
Safety precautions for proper grounding installation
CAUTION: Connecting to improperly grounded equipment can result in an
electric shock to your device.
This product is equipped with a USB Cable for connecting with desktop or
notebook computer. Be sure your computer is properly grounded (earthed)
before connecting this product to the computer. The power supply cord of
a desktop or notebook computer has an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet
which is properly installed and grounded in accordance with all local
codes and ordinances.
Safety precautions for power supply unit
 Use the correct external power source
A product should be operated only from the type of power source
indicated on the electrical ratings label. If you are not sure of the type of
power source required, consult your authorized service provider or local
power company. For a product that operates from battery power or
other sources, refer to the operating instructions that are included with
the product.
This product should be operated only with the following designated
power supply unit(s).
AC adapter:
HTC, Model TC P5000-US, TC P5000-EU, TC P5000-UK,
TC P5000-AU,
 Handle battery packs carefully
4 Safety and regulatory guide
This product contains a Lithium-ion polymer or Lithium-ion battery.
There is a risk of fire and burns if the battery pack is handled improperly.
Do not attempt to open or service the battery pack. Do not disassemble,
crush, puncture, short external contacts or circuits, dispose of in fire or
water, or expose a battery pack to temperatures higher than 60˚C
(140˚F).
WARNING: To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external contacts,
expose to temperature above 60° C
(140° F), or dispose of in fire or water. Recycle or dispose
of used batteries according to the local regulations or
reference guide supplied with your product.
 Take extra precautions
 Keep the device dry and away from water or any liquid as it may
cause a short circuit.
 The phone should only be connected to products that bear the
USB-IF logo or have completed the USB-IF compliance program.
 If the battery leaks:
 Do not allow the leaking fluid to come in contact with skin or clothing.
If already in contact, flush the affected area immediately with clean
water and seek medical advice.
 Do not allow the leaking fluid to come in contact with eyes. If already
in contact, DO NOT rub; rinse with clean water immediately and seek
medical advice.
 Take extra precautions to keep a leaking battery away from fire as
there is a danger of ignition or explosion.
Safety precautions for direct sunlight
Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product inside a vehicle or in places where
the temperature may exceed 60°C (140°F), such as on a car dashboard,
window sill, or behind a glass that is exposed to direct sunlight or strong
ultraviolet light for extended periods of time. This may damage the product,
overheat the battery, or pose a risk to the vehicle.
Prevention of hearing loss
Safety and regulatory guide
CAUTION: Permanent hearing loss may occur if
earphones or headphones are used at high volume
for prolonged periods of time.
This device and earphone have been tested to comply with the Sound
Pressure Level requirement laid down in the applicable EN 50332-1
and/or EN 50332-2 standards.
Safety in aircraft
Due to the possible interference caused by this product to an aircraft’s
navigation system and its communications network, using this device’s
phone function on board an airplane is against the law in most countries. If
you want to use this device when on board an aircraft, remember to turn
off your phone by switching to Airplane Mode.
Environment restrictions
Do not use this product in gas stations, fuel depots, chemical plants or
where blasting operations are in progress, or in potentially explosive
atmospheres such as fuelling areas, fuel storehouses, below deck on
boats, chemical plants, fuel or chemical transfer or storage facilities, and
areas where the air contains chemicals or particles, such as grain, dust, or
metal powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Explosive atmospheres
When in any area with a potentially explosive atmosphere or where
flammable materials exist, the product should be turned off and the user
should obey all signs and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even death. Users are
advised not to use the equipment at refueling points such as service or
gas stations, and are reminded of the need to observe restrictions on the
use of radio equipment in fuel depots, chemical plants, or where blasting
operations are in progress. Areas with a potentially explosive atmosphere
are often, but not always, clearly marked. These include fueling areas,
below deck on boats, fuel or chemical transfer or storage facilities, and
areas where the air contains chemicals or particles, such as grain, dust, or
metal powders.
Road safety
Full attention must be given to driving at all times in order to reduce the
risk of an accident. Using a phone while driving (even with a hands free kit)
causes distraction and can lead to an accident. You must comply with
local laws and regulations restricting the use of wireless devices while
driving.
6 Safety and regulatory guide
Safety precautions for RF exposure
 Avoid using your phone near metal structures (for example, the steel
frame of a building).
 Avoid using your phone near strong electromagnetic sources, such as
microwave ovens, sound speakers, TV and radio.
 Use only original manufacturer-approved accessories, or accessories
that do not contain any metal.
 Use of non-original manufacturer-approved accessories may violate
your local RF exposure guidelines and should be avoided.
Interference with medical equipment functions
This product may cause medical equipment to malfunction. The use of
this device is forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer of
your device to determine if they are adequately shielded from external RF
energy. Your physician may be able to assist you in obtaining this
information.
Turn your phone OFF in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Hearing aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider,
or call the customer service line to discuss alternatives.
Electrical safety
 Accessories
 Use only approved accessories.
 Do not connect with incompatible products or accessories.
 Connection to a car
Seek professional advice when connecting a phone interface to the
vehicle electrical system.
 Faulty and damaged products
 Do not attempt to disassemble the phone or its accessory.
 Only qualified personnel must service or repair the phone or its
accessory.
General precautions
You alone are responsible for how you use your phone and any
consequences of its use. You must always switch off your phone
wherever the use of a phone is prohibited. Use of your phone is subject to
safety measures designed to protect users and their environment.
Safety and regulatory guide
 Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device to
prevent damaging them and remove the device from your pants’ pocket
before sitting down. It is also recommended that you store the device in
a protective case and only use the device stylus or your finger when
interacting with the touch screen. Cracked display screens due to
improper handling are not covered by the warranty.
 Protect your phone
 Always treat your phone and its accessories with care and keep them
in a clean and dust-free place.
 Do not expose your phone or its accessories to open flames or lit
tobacco products.
 Do not drop, throw or try to bend your phone or its accessories.
 Do not use harsh chemicals, cleaning solvents, or aerosols to clean
the device or its accessories.
 Do not paint your phone or its accessories.
 Do not attempt to disassemble your phone or its accessories, only
authorised personnel must do so.
 Store your phone or its accessories at temperatures between 0° C to
40° C.
 Please check local regulations for disposal of electronic products.
 Do not carry your phone in your back pocket as it could break when
you sit down.
 Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an
authorized service technician or provider under the following conditions:
 The product has been exposed to rain or liquid, dropped, subject to
impact or damaged.
 There are noticeable signs of overheating.
 The product does not operate normally when you follow the operating
instructions.
 Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
 Avoid wet areas
Never use the product in rain, or near washbasins or other wet or high
humidity locations. If your product gets wet, do not try to dry the product
with the use of an oven or dryer, as this may damage your product.
 Avoid using your device after a dramatic change in temperature
When you move your device between environments with very different
temperature and/or humidity ranges, condensation may form on or
8 Safety and regulatory guide







within the device. To avoid damaging the device, allow sufficient time
for the moisture to evaporate before using the device.
NOTICE: When taking the device from low-temperature conditions into
a warmer environment or from high-temperature conditions into a
cooler environment, allow the device to acclimate to room temperature
before turning on power.
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings in
the product. Slots and openings are provided for ventilation. These
openings must not be blocked or covered.
Adjust the volume
Turn down the volume before using headphones or other audio
devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but
NEVER use water to clean the LCD screen.
Small children
Do not leave your phone and its accessories within the reach of small
children or allow them to play with it. They could hurt themselves or
others, or could accidentally damage the phone. Your phone contains
small parts with sharp edges that may cause an injury or which could
become detached and create a choking hazard. Consult the doctor
immediately if the accessories or battery are swallowed.
Repetitive motion injuries
To minimise the risk of RSI, when Texting or playing games with your
phone:
 Do not grip the phone too tightly
 Press the buttons lightly
Electrostatic discharge (ESD)
Do not touch the SIM card’s metal connectors.
Emergency calls
This phone, like any wireless phone, operates using radio signals,
which cannot guarantee connection in all conditions. Therefore, you
must never rely solely on any wireless phone for emergency
communications.
Regulatory agency identifications
For regulatory identification purposes, your product is assigned a model
number of 601HT.
FCC ID: NM8601HT
To view your FCC ID in your device you may also go to the Settings menu
Safety and regulatory guide
 About Phone  Legal Information  Regulatory.
This is a Class 1 laser device.
However, the design of this product incorporates optics, a protective
housing and scanning safeguard such that there is no access to level of
laser radiation above Class 1.
CAUTION: Use of controls or adjustment or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
Laser beams
To ensure continued reliable and safe operation of your device, use only
the accessories listed below with your 601HT.
The Battery Pack has been assigned a model number of B2PZC100.
Operating temperature range: 32 °F to 104 °F (0 °C to 40 °C)
European Union notice
Products with CE marking comply with the Radio Equipment Directive
(2014/53/EU) issued by the Commission of the European Community.
This radio equipment operates with the following frequency bands and
maximum radio-frequency power:
Maximum Tune-up Conducted Power (Unit:dBm)
GSM 900: 33.5
GSM 1800: 30.0
WCDMA Band I: 24.0
WCDMA Band VIII: 24.0
LTE Band 1: 23.5
LTE Band 3: 23.5
10 Safety and regulatory guide
LTE Band 8: 23.5
LTE Band 28: 23.5
LTE Band 38: 23.5
802.11b : 20.0
802.11g: 18.0
802.11n HT20 (2.4GHz): 18.0
802.11n HT40 (2.4GHz): 18.0
802.11a: 18.0
802.11n HT20 (5GHz): 18.0
802.11n HT40 (5GHz): 18.0
802.11ac : 18.0
Bluetooth: 12.0
ANT+
NFC
The operation of 5.15-5.35GHz is restricted to indoor use in all EU
Member States.
SAR information
Head: 0.55 W/kg@10g (CE)
Body: 0.42 W/kg@10g (CE)
Federal Communications Commission notice
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or TV reception, which can be determined by turning
the equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio or television technician for
Safety and regulatory guide
11
help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to the device that are not expressly approved by HTC
Corporation may void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
 This Transmitter has been demonstrated co-location compliance
requirements with Bluetooth and WLAN.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
 This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment.
Exposure to Radio Frequency Energy
Your wireless device has an internal antenna that emits radio frequency
(RF) energy. Human exposure to RF energy has been and continues to
be the subject of scientific research. According to the U.S. Food and Drug
Administration (FDA), “the weight of scientific evidence has not linked cell
phones with any health problems.” You can access this FDA publication
and other information on human exposure to RF energy at:
U.S. Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/RadiationEmittingProductsandPr
ocedures/HomeBusinessandEntertainment/CellPhones/ucm116282.htm
Federal Communications Commission:
http://www.fcc.gov/encyclopedia/radio-frequency-safety
NIH National Institute of Environmental Health Sciences:
http://www.niehs.nih.gov/health/topics/agents/cellphones/
World Health Organization:
http://www.who.int/mediacentre/factsheets/fs193/en/
IEEE Committee on Man and Radiation:
http://ewh.ieee.org/soc/embs/comar/
International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de/
Specific Absorption Rate (SAR) Testing
Your device has been designed to comply with applicable limits for RF
exposure. These limits use a unit of measurement called Specific
Absorption Rate, or SAR, which refers to the rate at which the body
absorbs RF energy. The Federal Communications Commission (FCC)
has established a SAR limit for mobile phones of 1.0W/kg, which applies
in the United States and other countries that follow the FCC’s SAR limit.
This limit is based upon standards developed by expert non-government
organizations, such as the Institute of Electrical and Electronics Engineers
12 Safety and regulatory guide
(IEEE) and the National Council on Radiation Protection and
Measurements (NCRP), and input from other federal agencies such as
the FDA and EPA. In countries that follow the Council of the European
Union, the SAR limit is 2.0 W/kg.
SAR testing is conducted with the device placed in common operating
positions (e.g., held against the head, worn on the body) and transmitting
at its highest certified power level in each frequency band of operation.
Because the device is transmitting at its highest certified power level, SAR
tests capture a worst-case operating scenario and therefore often do not
reflect the amount of RF exposure during normal, everyday use. More
information on SAR testing is available on the FCC’s website at
http://www.fcc.gov/guides/wireless-devices-and-health-concerns.
HTC Corp. submitted SAR test results demonstrating compliance with the
FCC’s SAR limit for wireless devices as part of the FCC’s equipment
certification process for this device. These results can be accessed via the
FCC’s equipment authorization database (found at https://www.fcc.gov/fccid)
by searching for the device’s FCC ID: NM8601HT.This device’s maximum
SAR values as reported to the FCC are:
SAR information
Head: 1.0 W/kg@1g (FCC)
Body: 0.5 W/kg@1g (FCC)
This device is restricted to indoor use only when operating in the 5150 to
5350 MHz frequency range.
Body-worn Operation
This device was tested for typical body-worn operations. A Operation
temperature
separation distance must be maintained between the user’s body and the
handset, including the antenna:
 0.5 cm to comply with the RF exposure requirements in Europe
 1 cm to comply with the RF exposure requirements in the U.S.
Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided.
Use only the supplied or an approved antenna. Unauthorized antennas,
modifications, or attachments could impair call quality, damage the phone,
or result in violation of regulations. Do not use the phone with a damaged
antenna. If a damaged antenna comes into contact with the skin, a minor
burn may result. Please contact your local dealer for replacement
antenna.
Telecommunications & Internet Association (TIA) safety
Safety and regulatory guide
13
information
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of 15 cm (6 inches) be maintained between a
handheld wireless phone and a pacemaker to avoid potential interference
with the pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless Technology
Research.
Persons with pacemakers:
 Should ALWAYS keep the phone more than 15 cm (6 inches) from their
pacemaker when the phone is turned ON.
 Should not carry the phone in a breast pocket.
 Should use the ear opposite the pacemaker to minimize the potential
for interference. If you have any reason to suspect that interference is
taking place, turn the phone OFF immediately.
WEEE notice
The Directive on Waste Electrical and Electronic Equipment (WEEE),
which entered into force as European law on 13th February 2003, resulted
in a major change in the treatment of electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of WEEE,
and in addition, to promote the reuse, recycling and other forms of
recovery of such wastes so as to reduce disposal.
The WEEE logo (shown at the left) on the product or on its
box indicates that this product must not be discarded in a
landfill. Electronic devices contain substances that may be
hazardous to the environment if not properly disposed of.
For more information about electronic and electrical waste
equipment disposal, recovery, and collection points, please
contact your local city center, household waste disposal
service, shop from where you purchased the equipment, or
manufacturer of the equipment.
RoHS compliance
This product is in compliance with Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011, on the restriction of the use
of certain hazardous substances in electrical and electronic equipment
(RoHS) and its amendments.
宏達國際電子股份有限公司
HTC Corporation
23, Xinghua Rd.,
Taoyuan 330, Taiwan
DECLARATION OF CONFORMITY
Intended for use in EU
For the following equipment:
Smartphone
(Product Description)
601HT
(Product Name)
HTC Corporation
(Manufacturer Name)
No.23, Xinghua Rd., Taoyuan Dist., Taoyuan City 330, Taiwan (R.O.C).
(Manufacturer Address)
0.63.762.2
(Software Version)
Telefication B.V. / 0560
(Notified Body Name / Number)
Adaptor, USB cable, Earphone, Type C to 3.5mm adaptor
(Supplied Accessories and components)
declare under our sole responsibility that the device complies with the essential requirements of Article 3 of the
Directive 2014/53/EU, if used for its intended use and that the following standards has been applied:
1. Health (Article 3.1.a of the Directive 2014/53/EU)
Applied standard(s): EN 50360: 2001 / A1: 2012 / EN 50566: 2013 / AC:2014/
EN 62479: 2010 / EN 62209-1: 2016/ -2: 2010
2. Safety (Article 3.1.a of the Directive 2014/53/EU)
Applied standard(s): EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013
3. Electromagnetic compatibility (Article 3.1.b of the Directive 2014/53/EU)
Applied standard(s): EN 301 489-1 V2.1.1 / -17 V3.1.1/
Draft EN 301 489-3 V2.1.1/ -52 V1.1.0
4. Efficient use of the radio frequency spectrum (Article 3.2 of the Directive 2014/53/EU)
Applied standard(s): EN 300 328 V2.1.1/ Final Draft EN 301 893 V2.1.0/
EN 300 440 V2.1.1/ Draft EN 303 413 V1.1.0/ EN 301 511 V12.5.1/
EN 301 908-1 V11.1.1/ -2 V11.1.1/ -13 V11.1.1 EN 300 330 V2.1.1
Additional Compliance:
Energy: Regulation 278/2009
Restricted Substances: EN 50581:2012, RoHS Directive 2011/65/EU
The notified body (Name:Telefication BV, ID: 0560) performed the conformity assessment according
to Annex III of the RE Directive and issued the EU-type examination certificate(Ref. No.: TBD).
Person responsible for making this declaration:
Graham Wheeler
(Name and signature)
Product Director
(Position / Title)
United Kingdom
(Place)
March 23, 2017
(Date)
91HXXXXX-XXM Rev.A
htc.com

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2017:05:10 13:40:08+08:00
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2017:05:10 13:45:11+08:00
Metadata Date                   : 2017:05:10 13:45:11+08:00
Producer                        : Microsoft® Office Word 2007
Format                          : application/pdf
Document ID                     : uuid:39be3feb-30af-439b-ab1a-e14722969235
Instance ID                     : uuid:a71dc368-c8ab-438b-8263-642ab68bf9f0
Page Count                      : 15
Language                        : zh-TW
Creator                         : Microsoft® Office Word 2007
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NM8601HT

Navigation menu