HTC CARV100-1 Car Speaker User Manual

HTC Corporation Car Speaker

user manual

2EnglishSpecificationsTalk me up to• x hours/standby me up to xxx hoursRechargeable baery with charging opon from car charger or PC via USB cable• LED light for status and baery indicator• Qualied for Bluetooth Specicaon version 2.0 + EDR (enhanced data rate), supporng • Headset and Hands-free Proles.e-SCO for enhanced audio quality• Size: • xxmm (L) x xxmm (W) x xxmm (T)Weight: • xx gramsGetting StartedThe HTC BS C100 is easy to operate. On the inial setup, do the following:1. Charge your car speakerBefore using HTC BS C100 for the rst me, you need to charge it by the supplied micro USB cable with your car charger for about 8 hours. Normal charge is approximately 3.5 hours. While charging the LED indicator lights orange. It • turns green when the baery is fully charged.Note:HTC BS C100 is funconal while charging.The and buons on the car speaker performs dierent funcons depending on how long you press it.- Press: Less than 1.5 seconds- Long press: more than 1.5 seconds
3English2. Power ON/OFFTo turn on the speaker, • press the buon. The LED indicator lights green (for 3 seconds) indicates the speaker is turned on. To turn o the speaker, • press again the buon. The LED indicator lights orange (for 3 seconds) indicates the speaker is turned o. 3. Pairing and connectBluetooth car speaker needs to be paired to your mobile phone before it can be used.1. Make sure the car speaker is turned o and turn o any Bluetooth devices previously paired with your car speaker.2. Turn on the Bluetooth feature on your phone and long press the buon to turn on the car speaker. The LED indicator displays an alternang green and orange light, this indicates the car speaker is in pairing mode.3. Set your mobile phone to search for Bluetooth devices, and select HTC BS C100 from the search results on your mobile phone.4. The car speaker will play an audible tone along a steady green light to indicate the pairing is successful and devices are connected.Reconnecng the car speaker to mobile phonea. When the car speaker is turned o then on again. It will aempt to re-establish the connecon to your mobile phone automacally.b. Alternavely, you can long press the buon to re-establish the connecon manually.4. Test your conneconTo test connecon to your phone, do the following:1. Place the car speaker onto your visor.2. Make a call from your mobile phone. If your mobile phone and car speaker are successfully connected, you can hear the ringing tone on the car speaker.3. Adjust the volume level (if necessary).
4EnglishReseng the pairing devicesLong press the XX buon to clear all pairing informaon stored in HTC BS C100. The car speaker will automacally turn o aer approx. 20 seconds.How to…Making a call Use your mobile phone in the normal way to make a call.Answering a call Press the buon to answer the call.Last number redialPress the buon twice to acve last number redial.Ending a callDuring a call, press the buon to hang up. If the other person hangs up rst, then the call will be ended automacally.Rejecng a callLong press or press the buon to reject the incoming call.Mung a call During a call, press the buon and the car speaker will mute. To cancel mute, press the buon again. Note:If the microphone is muted, the prompt tone will be played back for every 5 seconds.Making a voice dial call Long press the buon and wait for the voice prompt.Adjusng sound and volumeTo increase the volume, press the Volume up (+) buon.• To decrease the volume, press the Volume up (-) buon.•
5EnglishBaeryWhen the baery needs charging, the LED indicator lights orange. If you do not charge the car speaker, it automacally turns o. What the LED indicator meanEvent LED color StatusGeneralGreen (Solid for 3 seconds) Car speaker is turned onOrange (Solid for 3 seconds) Car speaker is turned oOrange (Solid, connuous) Baery is lowGreen (Blink) Incoming callGreen (Solid, connuous) Call in progressPairingAlternang Green and Orange (Blink)Pairing modeGreen (Solid, connuous) Devices are successfully pairedOrange (Blink)Devices are unsuccessfully pairedChargingOrange (Solid, connuous) Baery chargingOrange (Blink) Charging errorGreen (Solid, connuous) Charging completeTroubleshooting & FAQI hear crackling noises Bluetooth is a radio technology, which means it is sensive to objects between the car • speaker and the connected device. It is designed for the car speaker and the connected device to be used within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc.).
6EnglishI cannot hear anything from my car speakerIncrease the volume in the car speaker.• Ensure that the car speaker is paired to your mobile phone.• Make sure your phone is connected to the car speaker.• I am having pairing problemsYou may have deleted your car speaker pairing connecon in your mobile phone.• Follow the pairing instrucons.• I want to reset the car speakerIt is possible to reset and test the car speaker by ’long press’ the XX buon unl the alternang green and orange lights are o. The car speaker will automacally turn o aer approx. 20 seconds. The next me you power on, the car speaker will go into pairing mode as the rst me you powered your new HTC BS C100 on.Will the HTC BS C100 work with other Bluetooth equipment?The HTC BS C100 is designed to work with Bluetooth mobile phones. It can also work with other Bluetooth devices that are compliant with Bluetooth version 1.1 or higher and support hands-free and/or advance audio distribuon prole.I cannot use Reject call, Redial, or Voice Dialling featureThese features are dependent on the ability of your mobile phone to support a hands-free prole. Even if the handsfree prole is implemented reject call, call hold and voice dialling are oponal features which are not supported by all devices. Please consult your device manual for details.The mobile phone is not connected to my car speaker in me to answer an incoming callIf the car speaker is o and is turned on when a call is incoming, the mobile phone and car speaker might not connect in me for the call to be answered. In order to avoid such inconveniences please keep the car speaker on, in range and connected.
7EnglishTaking care of your car speakerAlways store the • HTC BS C100 with the power o and safely protected.Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or • below -10°C/14°F). This can shorten baery life and may aect operaon.High temperatures may also degrade performance. Do not expose the • HTC BS C100 to rain or other liquids.WARNING!Car speakers are capable of delivering sounds at loud volumes and high pitched tones. Exposure to such sounds can result in permanent hearing loss damage. The volume level may vary based on condions such as the phone you are using, its recepon and volume sengs, and the environment. Please read the safety guidelines below prior to using this car speaker.Safety guidelines1. Prior to using this product follow these steps: Before using the car speaker, turn the volume control to its lowest level, • Make a test call, and then • Slowly adjust the volume control to a comfortable level.• 2. During the use of this productKeep the volume at the lowest level possible and avoid using the car speaker in noisy • environments where you may be inclined to turn up the volume;If increased volume is necessary, adjust the volume control slowly;• 3. Keep out of reach of children The plasc bags the product and its parts are wrapped in are not toys for children. The bags themselves or the many small parts they contain may cause choking if ingested. 4. Never try to dismantle the product yourself None of the internal components can be replaced or repaired by users. Only authorised dealers or service centres may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, contact your dealer.
8English5. ACA TS028 – Ignion of ammable atmospheres Do not use the car speaker in environments where there is a danger of ignion of ammable gases.CertificationCEThis product is CE marked according to the provisions of the R & TTE Direcve (99/5/EC). Hereby, HTC, declares that this product is in compliance with the essenal requirements and other relevant provisions of Direcve 1999/5/EC.For further informaon please consult hp://www.HTC.comWithin the EU this device is intended to be used in Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, The Netherlands, United Kingdom, and within EFTA in Iceland, Norway and Switzerland.BluetoothThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HTC is under license. Other trademarks and trade names are those of their respecve owners.Compability for a Beer EnvironmentThe Direcve on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on the 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.The purpose of this direcve is, as a priority, the prevenon of WEEE, and in addion, to promote the reuse, recycling and other forms of recovery of such waste so as to reduce disposal.The WEEE logo on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocang over to the specied collecon point for recycling of such hazardous waste. Isolated collecon and proper recovery of your electronic and electrical waste equipment at the me of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will
9Englishensure safety of human health and environment. For more informaon about electronic and electrical waste equipment disposal, recovery, and collecon points, please contact your local city centre, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment. FCC Regulaons:This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separaon between the equipment and receiver.- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Changes or modicaons not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.The antenna(s) used for this transmier must not be co-located or operang in conjuncon with any other antenna or transmier.
10EnglishRF Exposure InformaonThis device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communicaons Commission of the U.S. Government.This device complies with FCC radiaon exposure limits set forth for an uncontrolled environment.RoHS Compliance This product is in compliance with Direcve 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restricon of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.Administrative Rules for Low-power Radio-Frequency DevicesArcle 12For those low-power radio-frequency devices that have already received a type- approval, companies, business units or users should not change its frequencies, increase its power or change its original features and funcons.Arcle 14The operaon of the low-power radio-frequency devices is subject to the condions that no harmful interference is caused to aviaon safety and authorized radio staon; and if interference is caused, the user must stop operang the device immediately and can’t re-operate it unl the harmful interference is clear. The authorized radio staon means a radio-communicaon service operang in accordance with COMMUNICATION ACT.The operaon of the low-power radio-frequency devices is subject to the interference caused by the operaon of an authorized radio staon, by another intenonal or unintenonal radiator, by industrial, scienc and medical radiate equipment.
11EnglishGlossary1. Bluetooth is a radio technology that connects devices, such as mobile phones and car speaker, without wires or cords over a short distance (approx. 10 meters/33 feet). Bluetooth is safe to use. It is secure too, so once a connecon has been made no-one can listen in and there is no interference from other Bluetooth devices either. Get more informaon at www.bluetooth.com.2. Bluetooth proles are the dierent ways that Bluetooth devices communicate with other devices. Bluetooth phones support the headset prole, the hands-free prole or both. In order to support a certain prole, a phone manufacturer must implement certain mandatory features within the phone’s soware.3. Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. Bluetooth devices will not work if the devices have not been paired.4. Standby mode is when the HTC BS C100 is passively waing for a call. When you ‘end’ a call on your mobile phone, the car speaker goes into standby mode.© 2011 HTC. All rights reserved. All other trademarks included herein are the property of their respecve owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HTC is under license.(Design and specicaons subject to change without noce).

Navigation menu