HTC PI46110 SMARTPHONE User Manual Statement
HTC Corporation SMARTPHONE Users Manual Statement
HTC >
Contents
- 1. Users Manual
- 2. USERS MANUAL
- 3. Users Manual Statement
Users Manual Statement
Safety and
regulatory guide
2011/08/02 for certification review only
2 Product Safety & Warranty Statement
Please read before proceeding
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE IT
OUT OF THE BOX.
DO NOT REMOVE THE BATTERY PACK WHEN THE PHONE IS
CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR
ATTEMPT TO DISASSEMBLE THE DEVICE.
Privacy restrictions
Some countries require full disclosure of recorded telephone
conversations, and stipulate that you must inform the person with
whom you are speaking that the conversation is being recorded.
Always obey the relevant laws and regulations of your country
when using the recording feature of your phone.
Disclaimers
ANY WEATHER, STOCK, OR OTHER INFORMATION, DATA,
OR DOCUMENTATION (“ACCESSED INFORMATION”) ARE
PROVIDED “AS IS” AND WITHOUT ANY WARRANTY OR ANY
TECHNICAL SUPPORT. TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, HTC AND ITS AFFILIATES expressly
disclaim any and all representations and warranties, arising by
law or otherwise, related to the Accessed Information, including
without limitation any express or implied representation or
warranty of merchantability, fitness for a particular purpose,
non-infringement, quality, accuracy, completeness, effectiveness,
reliability, or usefulness. Without limiting the foregoing, it is
further understood that HTC and its Affiliates are not responsible
for any use or of the Accessed Information or the results arising
from such use, and that you use such information at your own
risk.
Limitation of damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, IN NO EVENT SHALL HTC OR ITS AFFILIATES BE
LIABLE TO YOU, ANY USER, OR THIRD PARTY FOR ANY
INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
PUNITIVE DAMAGES OF ANY KIND, ARISING IN CONTRACT,
TORT, OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO,
INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF
BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF
PROFITS, REGARDLESS OF THE FORESEEABILITY THEREOF
OR WHETHER HTC OR ITS AFFILIATES HAVE BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. AND IN NO EVENT
SHALL THE TOTAL LIABILITY OF HTC OR ITS AFFILIATES
2011/08/02 for certification review only
Product Safety & Warranty Statement 3
EXCEED THE AMOUNT RECEIVED FROM YOU, REGARDLESS
OF THE LEGAL THEORY UNDER WHICH THE CAUSE OF
ACTION IS BROUGHT. THE FOREGOING DOES NOT AFFECT
ANY STATUTORY RIGHTS WHICH MAY NOT BE DISCLAIMED.
Important health information and safety
precautions
When using this product, the safety precautions below must be
taken to avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and
damage to the equipment, observe the following precautions.
Electrical safety
This product is intended for use when supplied with power from
the designated battery or power supply unit. Other usage may be
dangerous and will invalidate any approval given to this product.
Safety precautions for proper grounding installation
CAUTION: Connecting to an improperly grounded equipment can
result in an electric shock to your device.
This product is equipped with a USB Cable for connecting
with desktop or notebook computer. Be sure your computer is
properly grounded (earthed) before connecting this product to
the computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate
outlet which is properly installed and grounded in accordance
with all local codes and ordinances.
Safety precautions for power supply unit
Use the correct external power source
A product should be operated only from the type of power
source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your
authorized service provider or local power company. For a
product that operates from battery power or other sources,
refer to the operating instructions that are included with the
product.
This product should be operated only with the following
designated power supply unit(s).
AC adapter:
• HTC, Model TC U250
2011/08/02 for certification review only
4 Product Safety & Warranty Statement
Handle battery packs carefully
This product contains a Lithium-ion polymer or Lithium-ion
battery. There is a risk of fire and burns if the battery pack
is handled improperly. Do not attempt to open or service
the battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or
expose a battery pack to temperatures higher than 60˚C
(140˚F).
WARNING: Danger of explosion if battery is
incorrectly replaced. To reduce risk of fire or burns,
do not disassemble, crush, puncture, short external
contacts, expose to temperature above 60° C
(140° F), or dispose of in fire or water. Replace
only with specified batteries. Recycle or dispose of
used batteries according to the local regulations or
reference guide supplied with your product.
NOTE: This product should be operated only with the following
designated Battery Pack(s).
• HTC, Model BI39100 (BTR6330B).
Take extra precautions
• Keep the battery or device dry and away from water or any
liquid as it may cause a short circuit.
• Keep metal objects away so they don’t come in contact with
the battery or its connectors as it may lead to short circuit
during operation.
• The phone should only be connected to products that bear
the USB-IF logo or have completed the USB-IF compliance
program.
• Do not use a battery that appears damaged, deformed,
or discolored, or the one that has any rust on its casing,
overheats, or emits a foul odor.
• Always keep the battery out of the reach of babies and small
children, to avoid swallowing of the battery. Consult the
doctor immediately if the battery is swallowed.
• Only use the battery with a charging system that has
been qualified with the system per this standard, IEEE-
Std-1725-2006. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage or other hazard.
• Replace the battery only with another battery that has
been qualified with the system per this standard, IEEE-
Std-1725-2006. Use of an unqualified battery may present a
risk of fire, explosion, leakage or other hazard.
2011/08/02 for certification review only
Product Safety & Warranty Statement 5
• Avoid dropping the phone or battery. If the phone or battery
is dropped, especially on a hard surface, and the user suspects
damage, take it to a service centre for inspection.
• If the battery leaks:
• Do not allow the leaking fluid to come in contact with
skin or clothing. If already in contact, flush the aected
area immediately with clean water and seek medical
advice.
• Do not allow the leaking fluid to come in contact with
eyes. If already in contact, DO NOT rub; rinse with clean
water immediately and seek medical advice.
• Take extra precautions to keep a leaking battery away
from fire as there is a danger of ignition or explosion.
Safety precautions for direct sunlight
Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product or its battery inside a
vehicle or in places where the temperature may exceed 60°C
(140°F), such as on a car dashboard, window sill, or behind a glass
that is exposed to direct sunlight or strong ultraviolet light for
extended periods of time. This may damage the product, overheat
the battery, or pose a risk to the vehicle.
Prevention of hearing loss
CAUTION: Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods of
time.
Safety in aircraft
Due to the possible interference caused by this product to an
aircraft’s navigation system and its communications network,
using this device’s phone function on board an airplane is against
the law in most countries. If you want to use this device when on
board an aircraft, remember to turn off your phone by switching
to Airplane Mode.
Environment restrictions
Do not use this product in gas stations, fuel depots, chemical
plants or where blasting operations are in progress, or in
potentially explosive atmospheres such as fuelling areas, fuel
storehouses, below deck on boats, chemical plants, fuel or
chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
2011/08/02 for certification review only
6 Product Safety & Warranty Statement
Explosive atmospheres
When in any area with a potentially explosive atmosphere or
where flammable materials exist, the product should be turned
off and the user should obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death. Users are advised not to use the equipment
at refueling points such as service or gas stations, and are
reminded of the need to observe restrictions on the use of radio
equipment in fuel depots, chemical plants, or where blasting
operations are in progress. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. These
include fueling areas, below deck on boats, fuel or chemical
transfer or storage facilities, and areas where the air contains
chemicals or particles, such as grain, dust, or metal powders.
Road safety
Full attention must be given to driving at all times in order to
reduce the risk of an accident. Using a phone while driving
(even with a hands free kit) causes distraction and can lead to
an accident. You must comply with local laws and regulations
restricting the use of wireless devices while driving.
Safety precautions for RF exposure
Avoid using your phone near metal structures (for example,
the steel frame of a building).
Avoid using your phone near strong electromagnetic
sources, such as microwave ovens, sound speakers, TV and
radio.
Use only original manufacturer-approved accessories, or
accessories that do not contain any metal.
Use of non-original manufacturer-approved accessories
may violate your local RF exposure guidelines and should
be avoided.
Interference with medical equipment functions
This product may cause medical equipment to malfunction. The
use of this device is forbidden in most hospitals and medical
clinics.
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so. Hospitals
or health care facilities may be using equipment that could be
sensitive to external RF energy.
2011/08/02 for certification review only
Product Safety & Warranty Statement 7
Hearing aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider, or call the customer service line to discuss
alternatives.
Nonionizing radiation
Your device has an internal antenna. This product should be
operated in its normal-use position to ensure the radiative
performance and safety of the interference. As with other
mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of
personnel, it is recommended that no part of the human body be
allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied integral antenna. Use of unauthorized
or modified antennas may impair call quality and damage the
phone, causing loss of performance and SAR levels exceeding
the recommended limits as well as result in non-compliance with
local regulatory requirements in your country.
To assure optimal phone
performance and ensure human
exposure to RF energy is within
the guidelines set forth in the
relevant standards, always use
your device only in its normal-
use position. Contact with the
antenna area may impair call
quality and cause your device to
operate at a higher power level
than needed. Avoiding contact
with the antenna area when the
phone is IN USE optimizes the
antenna performance and the
battery life.
Antenna
location
Electrical safety
Accessories
• Use only approved accessories.
• Do not connect with incompatible products or accessories.
• Take care not to touch or allow metal objects, such as coins
or key rings, to contact or short-circuit the battery terminals.
Connection to a car
Seek professional advice when connecting a phone interface to
the vehicle electrical system.
Faulty and damaged products
2011/08/02 for certification review only
8 Product Safety & Warranty Statement
• Do not attempt to disassemble the phone or its accessory.
• Only qualified personnel must service or repair the phone or
its accessory.
General precautions
You alone are responsible for how you use your phone and any
consequences of its use. You must always switch off your phone
wherever the use of a phone is prohibited. Use of your phone is
subject to safety measures designed to protect users and their
environment.
Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device
to prevent damaging them and remove the device from your
pants’ pocket before sitting down. It is also recommended
that you store the device in a protective case and only use the
device stylus or your finger when interacting with the touch
screen. Cracked display screens due to improper handling are
not covered by the warranty.
Device getting warm after prolonged use
When using your device for prolonged periods of time, such
as when you’re talking on the phone, charging the battery or
browsing the Web, the device may become warm. In most
cases, this condition is normal and therefore should not be
interpreted as a problem with the device.
Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service
needed on components inside the device should be done by an
authorized service technician or provider.
Protect your phone
• Always treat your phone and its accessories with care and
keep them in a clean and dust-free place.
• Do not expose your phone or its accessories to open flames
or lit tobacco products.
• Do not expose your phone or its accessories to liquid,
moisture or high humidity.
• Do not drop, throw or try to bend your phone or its
accessories.
• Do not use harsh chemicals, cleaning solvents, or aerosols to
clean the device or its accessories.
• Do not paint your phone or its accessories.
• Do not attempt to disassemble your phone or its accessories,
only authorised personnel must do so.
• Do not expose your phone or its accessories to extreme
temperatures, minimum -20 and maximum 50 degrees
Celsius.
2011/08/02 for certification review only
Product Safety & Warranty Statement 9
• Please check local regulations for disposal of electronic
products.
• Do not carry your phone in your back pocket as it could
break when you sit down.
Damage requiring service
Unplug the product from the electrical outlet and refer
servicing to an authorized service technician or provider under
the following conditions:
• Liquid has been spilled or an object has fallen into the
product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the
operating instructions.
Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Avoid wet areas
Never use the product in a wet location.
Avoid using your device after a dramatic change in
temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation
may form on or within the device. To avoid damaging the
device, allow sufficient time for the moisture to evaporate
before using the device.
NOTICE: When taking the device from low-temperature
conditions into a warmer environment or from high-
temperature conditions into a cooler environment,
allow the device to acclimate to room temperature
before turning on power.
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
Air bags
Do not place a phone in the area over an air bag or in the air
bag deployment area. Store the phone safely before driving
your vehicle.
Mounting accessories
Do not use the product on an unstable table, cart, stand,
tripod, or bracket. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
2011/08/02 for certification review only
10 Product Safety & Warranty Statement
Avoid unstable mounting
Do not place the product with an unstable base.
Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
Adjust the volume
Turn down the volume before using headphones or other audio
devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning, but NEVER use water to clean the LCD screen.
Small children
Do not leave your phone and its accessories within the reach
of small children or allow them to play with it. They could hurt
themselves or others, or could accidentally damage the phone.
Your phone contains small parts with sharp edges that may
cause an injury or which could become detached and create a
choking hazard.
Repetitive motion injuries
To minimise the risk of RSI, when Texting or playing games with
your phone:
• Do not grip the phone too tightly
• Press the buttons lightly
• Make use of the special features in the handset which
minimise the number of buttons which have to be pressed,
such as message templates and predictive text.
• Take lots of breaks to stretch and relax.
Operating machinery
Full attention must be given to operating the machinery in
order to reduce the risk of an accident.
Electrostatic discharge (ESD)
Do not touch the SIM card’s metal connectors.
Loud noise
This phone is capable of producing loud noises which may
damage your hearing.
Emergency calls
This phone, like any wireless phone, operates using radio
signals, which cannot guarantee connection in all conditions.
Therefore, you must never rely solely on any wireless phone for
emergency communications.
2011/08/02 for certification review only
Product Safety & Warranty Statement 11
Regulatory agency identifications
For regulatory identification purposes, your product is assigned a
model number of PI46110.
To ensure continued reliable and safe operation of your device,
use only the accessories listed below with your PI46110.
The Battery Pack has been assigned a model number of
BI39100
(BTR6330B)
.
Operating temperature range: 32°F to 122°F (0°C to 50°C)
NOTE: This product is intended for use with a certified Class
2 Limited Power Source, rated 5 Volts DC, maximum 1
Amp power supply unit.
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio or television
technician for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
2011/08/02 for certification review only
12 Product Safety & Warranty Statement
IMPORTANT NOTE
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC RF exposure
compliance requirements, please follow operation instruction as
documented in this manual.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter, except the
transmitters built-in with the device.
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices
THIS PHONE HAS A HAC RATING OF M4/T4*
* NOTE: This phone with an extended battery installed (sold
separately) has a HAC rating of M4/T3
• HTC, Model PI46110
What is Hearing Aid Compatibility?
The Federal Communications Commission has implemented rules
and a rating system designed to enable people who wear hearing
aids to more effectively use these wireless telecommunications
devices. The standard for compatibility of digital wireless phones
with hearing aids is set forth in American National Standard
Institute (ANSI) standard C63.19. There are two sets of ANSI
standards with ratings from one to four (four being the best
rating): an “M” rating for reduced interference making it easier
to hear conversations on the phone when using the hearing aid
microphone, and a “T” rating that enables the phone to be used
with hearing aids operating in the telecoil mode thus reducing
unwanted background noise.
How will I know which wireless phones are Hearing Aid
Compatible?
The Hearing Aid Compatibility rating is
displayed on the wireless phone box.
A phone is considered Hearing Aid Compatible
for acoustic coupling (microphone mode) if it
has an “M3” or “M4” rating. A digital wireless
phone is considered Hearing Aid Compatible
for inductive coupling (telecoil mode) if it has
a “T3” or “T4” rating.
2011/08/02 for certification review only
Product Safety & Warranty Statement 13
How will I know if my hearing aid will work with a
particular digital wireless phone?
You’ll want to try a number of wireless phones so that you can
decide which works the best with your hearing aids.
You may also want to talk with your hearing aid professional
about the extent to which your hearing aids are immune to
interference, if they have wireless phone shielding, and whether
your hearing aid has a HAC rating.
For information about hearing aids and digital wireless
phones
• FCC Hearing Aid Compatibility and Volume Control – http://
www.fcc.gov/cgb/dro/hearing.html
• Hearing Loss Association of America – http://www.
hearingloss.org/learn/cellphonetech.asp
• CTIA – http://www.accesswireless.org/hearingaid/
• Gallaudet University, RERC - http://tap.gallaudet.edu/voice
PI46110 has not been shown to comply with any hearing aid
compatibility requirements when using the GSM air interface
and is not configured to use the GSM air interface in the United
States. Hearing aid or cochlear implant users should note this
fact and consult the service provider about return and exchange
policies should such operation prove to be unacceptable.
This phone has been tested and rated for use with hearing aids
for some of the wireless technologies that it uses. However,
there may be newer wireless technologies that have not been
tested on this device for use with hearing aids. It is important
to try the different features of this phone thoroughly and in
different locations, using your hearing aid or cochlear implant, to
determine if you hear any interfering noise. Consult your service
provider or the manufacturer of this phone for information on
hearing aid compatibility. If you have questions about return or
exchange policies, consult your service provider or phone retailer.
SAR Information
Head: 0.552 W/kg@1g (FCC)
Body: 1.26 W/kg@1g (FCC)
THIS MODEL DEVICE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. For body
worn operation, this phone has been tested and meets the FCC
RF exposure guidelines when used with the HTC Corporation.
Accessories supplied or designated for this product. Use of
other accessories may not ensure compliance with the FCC RF
exposure guidelines.
2011/08/02 for certification review only
14 Product Safety & Warranty Statement
Your wireless mobile phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on the safety standards previously set by
both U.S. and international standards bodies:
American National Standards Institute (ANSI) IEEE. C95.1-
1992.
National Council on Radiation Protection and Measurement
(NCRP). Report 86. 1986.
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1996.
Ministry of Health (Canada), Safety Code 6. The standards
include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phone employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg*.
The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model device is on file with the FCC and can be found under
the Display Grant section of https://fjallfoss.fcc.gov/oetcf/
eas/reports/GenericSearch.cfm after searching on FCC ID:
NM8PI46110. Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular Telecommunications &
Internet Association (CTIA) Web-site as http://www.phonefacts.
net.
* In the U.S. and Canada, the SAR limit for mobile phone used
by the public is 1.6 Watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in usage.
Normal condition only to ensure the radiative performance and
safety of the interference. As with other mobile radio transmitting
equipment, users are advised that for satisfactory operation of
the equipment and for the safety of personnel, it is recommended
that no part of the human body be allowed to come too close to
the antenna during operation of the equipment.
2011/08/02 for certification review only
Product Safety & Warranty Statement 15
Body-worn Operation
This device was tested for typical body-worn operations. To
comply with RF exposure requirements, a minimum separation
distance of 1 cm must be maintained between the user’s body
and the handset, including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do
not meet these requirements may not comply with RF exposure
requirements and should be avoided.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of regulations. Do not
use the phone with a damaged antenna. If a damaged antenna
comes into contact with the skin, a minor burn may result. Please
contact your local dealer for replacement antenna.
FCC RF Radiation Exposure Statement
This Transmitter has been demonstrated co-location
compliance requirements with Bluetooth and WLAN.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment.
Telecommunications & Internet Association (TIA)
safety information
Pacemakers
The Health Industry Manufacturers Association recommends
that a minimum separation of 15 cm (6 inches) be maintained
between a handheld wireless phone and a pacemaker to
avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research
by and recommendations of Wireless Technology Research.
Persons with pacemakers:
Should ALWAYS keep the phone more than
15 cm (6 inches)
from their pacemaker when the phone is turned ON.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize
the potential for interference. If you have any reason to
suspect that interference is taking place, turn the phone
OFF immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider, or call the customer service line to discuss
alternatives.
2011/08/02 for certification review only
16 Product Safety & Warranty Statement
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn the phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
WEEE notice
The Directive on Waste Electrical and Electronic Equipment
(WEEE), which entered into force as European law on 13th
February 2003, resulted in a major change in the treatment of
electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention
of WEEE, and in addition, to promote the reuse, recycling and
other forms of recovery of such wastes so as to reduce disposal.
The WEEE logo (shown at the left) on the product or on
its box indicates that this product must not be disposed
of or dumped with your other household waste. You are
liable to dispose of all your electronic or electrical waste
equipment by relocating over to the specified collection
point for recycling of such hazardous waste. Isolated
collection and proper recovery of your electronic and
electrical waste equipment at the time of disposal will
allow us to help conserving natural resources. Moreover,
proper recycling of the electronic and electrical waste
equipment will ensure safety of human health and
environment. For more information about electronic
and electrical waste equipment disposal, recovery, and
collection points, please contact your local city center,
household waste disposal service, shop from where
you purchased the equipment, or manufacturer of the
equipment.
RoHS compliance
This product is in compliance with Directive 2002/95/EC of the
European Parliament and of the Council of 27 January 2003,
on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS) and its amendments.
2011/08/02 for certification review only
91H0xxxx-xxM Rev.A
2011/08/02 for certification review only