Contents
- 1. User Manual Statement
- 2. User Manual
User Manual Statement
Safety and
regulatory guide
2 Safety and regulatory guide
Please read before proceeding
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE
DEVICE OUT OF THE BOX.
YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR
ATTEMPT TO DISASSEMBLE THE DEVICE.
Privacy restrictions
Some countries require full disclosure of recorded telephone
conversations, and stipulate that you must inform the person with
whom you are speaking that the conversation is being recorded.
Always obey the relevant laws and regulations of your country
when using the recording feature of your phone.
Disclaimers
ANY WEATHER, STOCK, OR OTHER INFORMATION, DATA, OR
DOCUMENTATION (“ACCESSED INFORMATION”) ARE
PROVIDED “AS IS” AND WITHOUT ANY WARRANTY OR ANY
TECHNICAL SUPPORT. TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, HTC AND ITS AFFILIATES expressly
disclaim any and all representations and warranties, arising by law
or otherwise, related to the Accessed Information, including
without limitation any express or implied representation or
warranty of merchantability, fitness for a particular purpose,
non-infringement, quality, accuracy, completeness, effectiveness,
reliability, or usefulness. Without limiting the foregoing, it is further
understood that HTC and its Affiliates are not responsible for any
use of the Accessed Information or the results arising from such
use, and that you use such information at your own risk.
Safety and regulatory guide 3
Pictograms and graphic symbols
Read this manual’s
Safety Information
and General
Precautions.
Do not use while
re-fuelling
Do not use
hand-held while
driving
This device may
produce a bright or
flashing light
For body-worn
operation maintain
a separation of 1.5
cm
Do not dispose of in
a fire
Small parts may
cause a choking
hazard
Avoid contact with
magnetic media
This device may
produce a loud
sound
Avoid extreme
temperatures
Keep away from
pacemakers and
other personal
medical devices
Avoid contact with
liquid, keep dry
Switch off when
instructed in
hospitals and
medical facilities
Do not try and
disassemble
Switch off when
instructed in aircraft
and airports
Do not rely on this
device for
emergency
communications
Switch off in
explosive
environments
Only use approved
accessories
4 Safety and regulatory guide
Limitation of damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO EVENT SHALL HTC OR ITS AFFILIATES BE LIABLE TO
YOU, ANY USER, OR THIRD PARTY FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF
ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE,
INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE,
LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS
OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS OF THE
FORESEEABILITY THEREOF OR WHETHER HTC OR ITS
AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. AND IN NO EVENT SHALL THE TOTAL
LIABILITY OF HTC OR ITS AFFILIATES EXCEED THE AMOUNT
RECEIVED FROM YOU, REGARDLESS OF THE LEGAL THEORY
UNDER WHICH THE CAUSE OF ACTION IS BROUGHT. THE
FOREGOING DOES NOT AFFECT ANY STATUTORY RIGHTS
WHICH MAY NOT BE DISCLAIMED.
Important health information and safety
precautions
When using this product, the safety precautions below must be
taken to avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage
to the equipment, observe the following precautions.
Electrical safety
This product is intended for use when supplied with power from
the designated battery or power supply unit. Other usage may be
dangerous and will invalidate any approval given to this product.
Safety precautions for proper grounding installation
CAUTION
: Connecting to improperly grounded equipment can
result in an electric shock to your device.
This product is equipped with a USB Cable for connecting with
desktop or notebook computer. Be sure your computer is properly
grounded (earthed) before connecting this product to the
computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate
Safety and regulatory guide 5
outlet which is properly installed and grounded in accordance with
all local codes and ordinances.
Safety precautions for power supply unit
Use the correct external power source
A product should be operated only from the type of power
source indicated on the electrical ratings label. If you are not
sure of the type of power source required, consult your
authorized service provider or local power company. For a
product that operates from battery power or other sources,
refer to the operating instructions that are included with the
product.
This product should be operated only with the following
designated power supply unit(s).
AC adapter:
HTC, Model TC U250, TC B270, TC E250, TC A250, TC C250
Handle battery packs carefully
This product contains a Lithium-ion polymer or Lithium-ion
battery. There is a risk of fire and burns if the battery pack is
handled improperly. Do not attempt to open or service the
battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or
expose a battery pack to temperatures higher than 60˚C
(140˚F).
WARNING
: To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external
contacts, expose to temperature above 60° C
(140° F), or dispose of in fire or water. Recycle or
dispose of used batteries according to the local
regulations or reference guide supplied with your
product.
Take extra precautions
Keep the device dry and away from water or any liquid as it
may cause a short circuit.
The phone should only be connected to products that bear
the USB-IF logo or have completed the USB-IF compliance
program.
6 Safety and regulatory guide
If the battery leaks:
Do not allow the leaking fluid to come in contact with skin or
clothing. If already in contact, flush the affected area
immediately with clean water and seek medical advice.
Do not allow the leaking fluid to come in contact with eyes. If
already in contact, DO NOT rub; rinse with clean water
immediately and seek medical advice.
Take extra precautions to keep a leaking battery away from
fire as there is a danger of ignition or explosion.
Safety precautions for direct sunlight
Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product inside a vehicle or in
places where the temperature may exceed 60
°
C (140
°
F), such as
on a car dashboard, window sill, or behind a glass that is exposed
to direct sunlight or strong ultraviolet light for extended periods of
time. This may damage the product, overheat the battery, or pose
a risk to the vehicle.
Prevention of hearing loss
CAUTION
: Permanent hearing loss may occur if
earphones or headphones are used at high volume for
prolonged periods of time.
NOTE
: For France, Earphone (listed below) for this device have
been tested to comply with the Sound Pressure Level requirement
laid down in the applicable NF EN 50332-1:2000 and/or NF EN
50332-2:2003 standards as required by French Article L. 5232-1.
Earphone, manufactured by HTC, Model HS S250.
Safety in aircraft
Due to the possible interference caused by this product to an
aircraft’s navigation system and its communications network,
using this device’s phone function on board an airplane is against
the law in most countries. If you want to use this device when on
board an aircraft, remember to turn off your phone by switching to
Airplane Mode.
Environment restrictions
Do not use this product in gas stations, fuel depots, chemical
plants or where blasting operations are in progress, or in
potentially explosive atmospheres such as fuelling areas, fuel
storehouses, below deck on boats, chemical plants, fuel or
Safety and regulatory guide 7
chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Explosive atmospheres
When in any area with a potentially explosive atmosphere or
where flammable materials exist, the product should be turned off
and the user should obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or
even death. Users are advised not to use the equipment at
refueling points such as service or gas stations, and are reminded
of the need to observe restrictions on the use of radio equipment
in fuel depots, chemical plants, or where blasting operations are in
progress. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked. These include fueling areas, below
deck on boats, fuel or chemical transfer or storage facilities, and
areas where the air contains chemicals or particles, such as grain,
dust, or metal powders.
Road safety
Full attention must be given to driving at all times in order to
reduce the risk of an accident. Using a phone while driving (even
with a hands free kit) causes distraction and can lead to an
accident. You must comply with local laws and regulations
restricting the use of wireless devices while driving.
Limiting exposure to radio frequency (RF) fields
For individuals concerned about limiting their exposure to RF
fields, the World Health Organisation (WHO) provides the
following advice:
Precautionary measures: Present scientific information does not
indicate the need for any special precautions for the use of mobile
phones. If individuals are concerned, they might choose to limit
their own or their children’s RF exposure by limiting the length of
calls, or using ‘hands-free’ devices to keep mobile phones away
from the head and body.
Further information on this subject can be obtained from the WHO
home page http://www.who.int/peh-emf Who Fact sheet 193:
June 2000.
Safety precautions for RF exposure
8 Safety and regulatory guide
Avoid using your phone near metal structures (for example, the
steel frame of a building).
Avoid using your phone near strong electromagnetic sources,
such as microwave ovens, sound speakers, TV and radio.
Use only original manufacturer-approved accessories, or
accessories that do not contain any metal.
Use of non-original manufacturer-approved accessories may
violate your local RF exposure guidelines and should be avoided.
Exposure to radio frequency (RF) signals
Your device contains a radio transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate
with your phone, the system handling your call controls the power
level at which your phone transmits.
The radiated output power is far below the international radio
frequency exposure limits. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety
standards previously set by international standards bodies:
American National Standards Institute (ANSI) IEEE. C95.1-1992
National Council on Radiation Protection and Measurement
(NCRP). Report 86. 1986
International Commission on Non-Ionizing Radiation Protection
(ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6. The standards
include a substantial safety margin designed to assure the safety
of all persons, regardless of age and health.
Your mobile device is designed not to exceed the limits for
exposure to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific
organisation ICNIRP and include safety margins designed to
assure the protection of all persons regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is
2 W/kg and the highest SAR value for this device when tested at
the ear was 0.679 W/kg@10g*.
As mobile devices offer a range of functions, they can be used in
other positions, such as on the body as described in this user
guide**.
As SAR is measured utilising the device’s highest transmitting
power, the actual SAR of this device while operating is typically
Safety and regulatory guide 9
below that indicated above. This is due to automatic changes to
the power level of the device to ensure it only uses the minimum
power required to communicate with the network.
*The tests are carried out in accordance with IEC standard
PT62209-1
**Please see the following section about body worn operation
As with other mobile radio transmitting equipment, users are
advised that for satisfactory operation of the equipment and for
the safety of personnel, it is recommended that no part of the
human body be allowed to come too close to the antenna during
operation of the equipment.
Your device has an internal antenna. Use only the supplied integral
antenna. Use of unauthorised or modified antennas may impair call
quality and damage the phone, causing loss of performance and
SAR levels exceeding the recommended limits as well as result in
non-compliance with local regulatory requirements in your
country.
To assure optimal phone performance and ensure human
exposure to RF energy is within the guidelines set forth in the
relevant standards; always use your device only in its normal-use
position. Do not touch or hold the antenna area unnecessarily
when placing or receiving a phone call. Contact with the antenna
area may impair call quality and cause your device to operate at a
higher power level than needed. Avoiding contact with the
antenna area when the phone is IN USE optimises the antenna
performance and the battery life.
Body-worn Operation
This device was tested for typical body-worn operations. A
minimum separation distance must be maintained between the
user’s body and the handset, including the antenna:
1 cm to comply with the RF exposure requirements in the U.S.
1.5 cm to comply with the RF exposure requirements in Europe
Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply
with RF exposure requirements and should be avoided.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of regulations. Do not use
the phone with a damaged antenna. If a damaged antenna comes
10 Safety and regulatory guide
into contact with the skin, a minor burn may result. Please contact
your local dealer for replacement antenna.
SAR information
0.679 W/kg@10g (head), 0.521 W/kg@10g (body)*
0.632 W/kg@1g (head), 1.06 W/kg@1g (body)**
*
NOTE:
The 10g SAR value is measured at GSM/GPRS/EGPRS
900/1800 MHz and WCDMA/HSDPA/HSUPA Band I & Band Vlll.
The Body SAR value of 0.521 W/kg@10g has been tested with
back of the device kept at 1.5 cm away from the body.
**
NOTE:
The 1g SAR value is measured at GSM/GPRS/EGPRS
850/1900 MHz. The Body SAR value of 1.06 W/kg@1g has been
tested with back of the device kept at 1 cm away from the body.
Interference in cars
Please note that because of possible interference to electronic
equipment, some vehicle manufacturers forbid the use of mobile
phone in their vehicles unless a handsfree kit with an external
antenna is included in the installation.
Interference with medical equipment functions
This product may cause medical equipment to malfunction.
The use of this device is forbidden in most hospitals and
medical clinics.
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
Hearing aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
service provider, or call the customer service line to discuss
alternatives.
Nonionizing radiation
Your device has an internal antenna. This product should be
operated in its normal-use position to ensure the radiative
performance and safety of the interference. As with other mobile
Safety and regulatory guide 11
radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of
personnel, it is recommended that no part of the human body be
allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied integral antenna. Use of unauthorized or
modified antennas may impair call quality and damage the phone,
causing loss of performance and SAR levels exceeding the
recommended limits as well as result in non-compliance with local
regulatory requirements in your country.
To assure optimal phone
performance and ensure human
exposure to RF energy is within the
guidelines set forth in the relevant
standards, always use your device
only in its normal-use position.
Contact with the antenna area may
impair call quality and cause your
device to operate at a higher power
level than needed. Avoiding contact
with the antenna area when the
phone is IN USE optimizes the
antenna performance and the
battery life.
Electrical safety
Accessories
Use only approved accessories.
Do not connect with incompatible products or accessories.
Take care not to touch or allow metal objects, such as coins or
key rings, to contact or short-circuit the battery terminals.
Connection to a car
Seek professional advice when connecting a phone interface to
the vehicle electrical system.
Faulty and damaged products
Do not attempt to disassemble the phone or its accessory.
Only qualified personnel must service or repair the phone or
its accessory.
General precautions
Antenna
location
Antenna
location
12 Safety and regulatory guide
You alone are responsible for how you use your phone and any
consequences of its use. You must always switch off your phone
wherever the use of a phone is prohibited. Use of your phone is
subject to safety measures designed to protect users and their
environment.
Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device to
prevent damaging them and remove the device from your
pants’ pocket before sitting down. It is also recommended that
you store the device in a protective case and only use the device
stylus or your finger when interacting with the touch screen.
Cracked display screens due to improper handling are not
covered by the warranty.
Device getting warm after prolonged use
When using your device for prolonged periods of time, such as
when you’re talking on the phone, charging the battery or
browsing the Web, the device may become warm. In most cases,
this condition is normal and therefore should not be interpreted
as a problem with the device.
Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service
needed on components inside the device should be done by an
authorized service technician or provider.
Protect your phone
Always treat your phone and its accessories with care and
keep them in a clean and dust-free place.
Do not expose your phone or its accessories to open flames or
lit tobacco products.
Do not expose your phone or its accessories to liquid,
moisture or high humidity.
Do not drop, throw or try to bend your phone or its
accessories.
Do not use harsh chemicals, cleaning solvents, or aerosols to
clean the device or its accessories.
Do not paint your phone or its accessories.
Do not attempt to disassemble your phone or its accessories,
only authorised personnel must do so.
Please check local regulations for disposal of electronic
products.
Do not carry your phone in your back pocket as it could break
when you sit down.
Safety and regulatory guide 13
Damage requiring service
Unplug the product from the electrical outlet and refer servicing
to an authorized service technician or provider under the
following conditions:
Liquid has been spilled or an object has fallen into the product.
The product has been exposed to rain or water.
The product has been dropped or damaged.
There are noticeable signs of overheating.
The product does not operate normally when you follow the
operating instructions.
Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Avoid wet areas
Never use the product in rain, or near washbasins or other wet
locations. If your product gets wet, do not try to dry the product
with the use of an oven or dryer, as this may damage your
product.
Avoid using your device after a dramatic change in temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation
may form on or within the device. To avoid damaging the device,
allow sufficient time for the moisture to evaporate before using
the device.
NOTICE
: When taking the device from low-temperature
conditions into a warmer environment or from high-temperature
conditions into a cooler environment, allow the device to
acclimate to room temperature before turning on power.
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
Air bags
Do not place a phone in the area over an air bag or in the air bag
deployment area. Store the phone safely before driving your
vehicle.
Mounting accessories
Do not use the product on an unstable table, cart, stand, tripod,
or bracket. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
14 Safety and regulatory guide
Avoid unstable mounting
Do not place the product with an unstable base.
Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
Adjust the volume
Turn down the volume before using headphones or other audio
devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning, but NEVER use water to clean the LCD screen.
Small children
Do not leave your phone and its accessories within the reach of
small children or allow them to play with it. They could hurt
themselves or others, or could accidentally damage the phone.
Your phone contains small parts with sharp edges that may
cause an injury or which could become detached and create a
choking hazard.
Repetitive motion injuries
To minimise the risk of RSI, when Texting or playing games with
your phone:
Do not grip the phone too tightly
Press the buttons lightly
Make use of the special features in the handset which
minimise the number of buttons which have to be pressed,
such as message templates and predictive text.
Take lots of breaks to stretch and relax.
Operating machinery
Full attention must be given to operating the machinery in order
to reduce the risk of an accident.
Electrostatic discharge (ESD)
Do not touch the SIM card’s metal connectors.
Loud noise
This phone is capable of producing loud noises which may
damage your hearing.
Emergency calls
This phone, like any wireless phone, operates using radio signals,
which cannot guarantee connection in all conditions. Therefore,
you must never rely solely on any wireless phone for emergency
communications.
Safety and regulatory guide 15
Regulatory agency identifications
For regulatory identification purposes, your product is assigned a
model number of
PJ40200
.
To ensure continued reliable and safe operation of your device,
use only the accessories listed below with your
PJ40200
.
The Battery Pack has been assigned a model number of
BJ40100
.
NOTE:
This product is intended for use with a certified Class 2
Limited Power Source, rated 5 Volts DC, maximum 1 Amp power
supply unit.
European Union notice
Products with CE marking comply with the R&TTE Directive
(99/5/EC), the EMC Directive (2004/108/EC), and the Low
Voltage Directive (2006/95/EC) issued by the Commission of the
European Community.
Compliance with these directives implies conformity to the
following European Norms (in parentheses are the equivalent
international standards).
EN 50360
EN 62209-1
EN 62311
EN 62209-2
EN 62479
EN 60950-1
EN 50332-1
EN 301 489-1
EN 301 489-3
EN 301 489-7
EN 301 489-17
EN 301 489-24
EN 301 511
EN 301 908-1
EN 301 908-2
EN 300 328
EN 300 440-1
EN 300 440-2
16 Safety and regulatory guide
This equipment may be operated in:
AT BE BG
CH
CY CZ
DE
DK
EE ES FI FR GB
GR
HU
IE
IT IS LI LT LU LV MT
NL
NO
PL PT RO
SE SI SK TR
Federal Communications Commission notice
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or TV reception, which can be
determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio or television
technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to the device that are not expressly approved
by HTC Corporation may void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement
Safety and regulatory guide 17
This Transmitter has been demonstrated co-location compliance
requirements with Bluetooth and WLAN.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment.
Telecommunications & Internet Association (TIA) safety
information
Pacemakers
The Health Industry Manufacturers Association recommends that
a minimum separation of 15 cm (6 inches) be maintained between
a handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
Should ALWAYS keep the phone more than 15 cm (6 inches)
from their pacemaker when the phone is turned ON.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the
potential for interference. If you have any reason to suspect that
interference is taking place, turn the phone OFF immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
service provider, or call the customer service line to discuss
alternatives.
WEEE notice
The Directive on Waste Electrical and Electronic Equipment
(WEEE), which entered into force as European law on 13th
February 2003, resulted in a major change in the treatment of
electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of
WEEE, and in addition, to promote the reuse, recycling and other
forms of recovery of such wastes so as to reduce disposal.
18 Safety and regulatory guide
The WEEE logo (shown at the left) on the product or
on its box indicates that this product must not be
disposed of or dumped with your other household
waste. You are liable to dispose of all your electronic
or electrical waste equipment by relocating over to
the specified collection point for recycling of such
hazardous waste. Isolated collection and proper
recovery of your electronic and electrical waste
equipment at the time of disposal will allow us to help
conserving natural resources. Moreover, proper
recycling of the electronic and electrical waste
equipment will ensure safety of human health and
environment. For more information about electronic
and electrical waste equipment disposal, recovery,
and collection points, please contact your local city
center, household waste disposal service, shop from
where you purchased the equipment, or
manufacturer of the equipment.
RoHS compliance
This product is in compliance with Directive 2002/95/EC of the
European Parliament and of the Council of 27 January 2003, on
the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS) and its amendments.
Products with 2.4–GHz Wireless LAN Devices France
For 2.4–GHz wireless LAN operation of this product, certain
restrictions apply. This equipment may use the entire–2400–MHz
to 2483.5–MHz frequency band (channels 1 through 13) for indoor
applications. For outdoor use, only 2400-2454 MHz frequency
band may be used. For the latest requirements, see
http://www.art-telecom.fr.
DECLARATION OF CONFORMITY
Intended for use in EU
For the following equipment:
Smartphone
(Product Description)
HTC One S
(Product Marketing Name)
PJ40200
(Product Name)
HTC Corporation
(Manufacturer Name)
No.23, Xinghua Rd., Taoyuan City, Taoyuan County 330, Taiwan.
(Manufacturer Address)
is herewith confirmed to comply with the essential requirements of Article 3 of the R&TTE 1999/5/EC
Directive, if used for its intended use and that the following standards has been applied:
1. Health (Article 3.1.a of the R&TTE Directive)
Applied standard(s): EN50360:2001AC:2006, EN 62209-1:2006, EN 62311:2008, EN
62209-2:2010/ EN62479:2010
2. Safety (Article 3.1.a of the R&TTE Directive)
Applied standard(s): EN60950-1:2006+A11:2009+A1:2010, EN50332-1:2000
3. Electromagnetic compatibility (Article 3.1.b of th e R&TTE Directive)
Applied standard(s): EN 301 489-1 V1.8.1/-3 V1.4.1/-7 V1.3.1/-17 V2.1.1 /-24 V1.5.1
4. Efficient use of the ra dio frequency spectru m (Article 3.2 of the R&TTE Directive)
Applied standard(s): EN 301 511 V9.0.2, EN 301 908-1 V4.2.1/-2 V5.2.1, EN 300 328 V1.7.1, EN
300 440-1 V1.6.1/-2 V1.4.1
Person responsible for making this declaration:
Philip Blair
(Name and signature)
Product Director
(Position / Title)
United Kingdom 2012/04/30
(Place) (Date)
宏達國際電子股份有限公司
HTC Corporation
23, Xinghua Rd.,
Taoyuan 330, Taiwan
91HXXXXX-XXM Rev.A
htc.com