HUAC F115725S Quint Band Signal Booster User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3438774
Application ID	gElQbjcbsprjarjiXPomSg==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	423.7kB (5296219 bits)
Date Submitted	2017-06-25 00:00:00
Date Available	2017-06-28 00:00:00
Creation Date	2017-06-20 09:24:31
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-06-25 16:15:27
Document Title	Commercial 30K说明书-128克彩色双铜 - 认证.cdr
Document Creator	CorelDRAW
Document Author:	窦杰

BOOST Boost Your Bars
.3 Commercial 30K Pro
ProZS-SS-LCD
Mobile Signal Booster
11330051
CONTENT
WHAT’S INCLUDED
HOW IT WORKS
HOW TO INSTALL YOUR SIGNAL BOOSTER
1.1 Overv1ew
1.2 InsIaIIunon PrepuruL'Ion
1.5 Home mm the 1ocm10n w'IIh me stvongesl Tece1ved signa1
1.41nsmll0mdoorAntennu
1.51nslulllndooTAnlenna
1.61nstullSignu1 Booster
1.7 Run coaxiu1cub1e
1.3 Power up yoUI me SI'gnal Booster
SIGNAL BOOSTER STATUS
LCD Features
LED Status
Control BUthns Operation
Manual Gain Conlvol (mgc)
TROUBLESHOOTING
AUTHORIZED K1TTING OPTIONS
Ecc RE EXPOSURE STATEMENT
1C RF EXPOSURE STATEMENT
WARNING AND STATEMENT
SPECIFICATIONS
PRODUCT WARRANTY
2/19
meummaummm
11
12
12
13
14
16
16
16
15
19
WHAT IS INCLUDED
0Q?»
CDmmerclal 30K Pro AUDCEXVESWW BoosterMountHerdwsre
We provide all accessories needed for \he signal booslev. Fol more inlovmcllon please v'lsli
www ' oosiusa com
Warning Unauthorized antennas, cables, and/or coupling devices are prohibited by new
FCC rules Please Contact FCC lor delalls' lraBBrCALLrFCC
HOW IT WORKS
The HiEoosl Commercial 50K Pro signal booster is designed to help mobile users
improve signal in homes, oilices, and other areas where cellular signal is weak
or unreliable. The autdoorantenno receives the signal train the nearest cellular
tower. ampliiies it, and transmits to the signal booster. Then the indoor antenna
will receive the signal and retransmit it to your mobile device. The signals
produced by your phone are also omplilied by the indoor antenna via the
booster and outdoor antenna.
This manual provides simple installation instructions that Will have your signal
booster kit running in record time.
HOW TO INSTALL YOUR SIGNAL BOOSTER
1.1 Over w
This monual wrll help you properly install your signal booster kll. it is important to
read through all oi the installation steps oeiore installing your equipment.
Thoroughly read through the instructions, visualize where all the equipment will
need to be installed and do a salt installation by placing the devices where they
need to be aeiore mounting any equipment
3/19
0 Commerciui 30K Pro Signui Booster 0 Outdoor Antenna
9 Indoor Antenna 0 Cable
9 l ZVIZtA, AC/DC Power Supply
1.2 Installation Preparation
Before you install
. Make sure you have sufficient cable length between the proposed
outdoor/indoor antenna location arid hooster connector.
. Make sure the position you install the booster is near to an existing eiectrical
outlet, well ventilated, and away from excessive heat, moisture, arid direct
sunlight.
Tools Required
Phillips Screwdriver Drill Mobile Phone
Befole you get started, you will need to picn the loyout or your system, This
involves linoing the location with the strongest received signcli lrorn the cellular
tower, as well as ontenno, booster, and cabie placement.
General installation steps:
1. Find the strongest received signai lor the iocat'lon oi the outdoor antenna.
2. Instuil the outdoor antenna on the roof to obtain the strongest downl'lnk
4/19
signal irom the local cellular towers,
3. install the indoor antennas where you want to improve the signal level.
4. Mount the booster, connect the cables lrom the outdoor antenna and indoor
antenna at the designated parts, and connect the booster to the AC supply
(make sure all the cables are connected belore applying powev),
1.3 How to find the location with the strongest received signal
The outdoor signal strength the booster receives directly allects the elliciency ol
the indoor coverage. That is why it is crucially important to install the antenna at
a good location and point it properly towards a tower where signal reception is
the strongest.
There are many methods that can be used to lind the strongest signal irom the
cellular towels, One is to use the LCD display on the booster that shows the
downlink power output at the booster in each band, the other is to use a mobile
phone or mobile phone app to test signal strength, and the third is to use a
commercially available signal strength meter,
We highly recommend that you use the LCD display on the booster as this
method is generally more convenient. However, in situations where the desired
carrier's signal is much weakerthan the other local signals, using a mobile
phone, app or signal level meter can be a more accurate method at homing in
on the best signal lor installation.
. LCD Display Method
Connect the outdool antenna to the boostev's outdoor port. Fix the outdoor
antenna on the tool ol the building and point it to the nearest cell tower. Then
have a look at the gain and output power value displayed on the booster’s LCD.
The outdoor antenna receives the strongest signal when the booster‘s downlink
output power Teaches its highest level in each band. ll the LCD shows maximum
5/19
11330051
gain and power, and there are nat any alarms (no lso, ALC, on: legend
llashing and no quick llashing green or red in LEDs), it means the present
location is the best lor ensuring that the booster has mux‘lmlzed perlormance.
The maximum downlink powerlpr Commercial 30K Pro is 15dBm, and the
maximum downlink gain is omda.
Note: These showed values may vary dynamically at times between 173 dB
which is normal due to outdoor signal conditions.
- Mobile Phone Method
You can use a telephone to test signal strength on the top at the building. The
number ol bars on the network indicator will deline approximate strength ol the
received signal. Normally the root at the building is the best place to receive the
strongest signal. As shown on the drawing below, you need to test the signal in
the points from A to E, and select the location with the best signal strength lor
outdoor installation, it is recommended to use a mobile app that can display in a
test mode the signal level in dBm units. it is more accurate than checking the
signal bars. For more details reler ta http://blog.hibooslusa,com/signul-strengtn-
measuleclnstiuctionsl.
Note: Please try to receive a signal lram cell towers that are not overloaded with
multiple users. This can be estimated by the population density in the area
served by the tower, For example, it is recommended to avoid cell towers near
supermarkets, shopping malls, stadiums or any other public places visited by
many people regularly. This will help maintain reliable phone call connections
and higher speed data services.
Mark the strongest received signal as the installation location and direction lor
the OUIdOOl antenna.
1.4 Install Outdoor Antenna
Install the outdoor antenna at the the location with the strongest received signal.
IMPORTANT: Testing the signal 3 times in the desired location belore installing
the outdoor antenna will help ensure the most smooth and stable phone calls
and data tmnsmisslon.
6/19
1 w 2 men
drameler pare
nu| &wasner
b k( U-b It
fl]
\nut
omdoovwrde band drrecnonar antenna rnstaHanon for relerence
drameler pure
9 1 |o 2 rncn
7/
bracket Urban 7 ‘
\ r, g
£5
\nm
Outdoorwme band pane‘ amenna rnslaHathlarremrence
Nate: Be sure the cradle is m the desired neigm and vowed toward me
svongesl cermrdr signal belore ugmenr'ng me nuts. Do not over fighlend
1.5 Install Indoor Amenna
Se‘ecl d mace on a wt)“ in me area where you need bener reception,
Mount the indoor antenna with the included scvews as shown in the figuve
below,
7/19
11330051
sllde lnlo mounl
lappmg screw nglng lolaer ‘ ‘ i
plasllc expanslan
boll
lnduorwlde band panel anlenna lns|allatlun lor relerence
lndoorwme band dome anlenna lnslallallan lar relerence
1.6 lns!a|l your signal booster
The signal boosler should be mourned in an easily occesslble area so it's easy to
perlorm general mulnlenance. The optimal area would be on o well located
near a power oullel. Please use a surge proleclor ruled at a minimum ol llmo
Joules between lhe booster's power udoplor one the AC power oullel on the
wall.
Mount the booster with the included screws as shown in lhe figure below,
1.7 Run coaxial cable
Loosely run the supplied coaxial cable lrom your outdoor antenna to your
booster connector marked "Outdoor”. We recommend applying waterprool
tape to lully woterprooi the connection.
Connect the indoor antenna cables irom your indoor antenna to the booster
connector marked "Indoor”. Tighten the connection by hand.
(Alter you have tested the system you can permanently secure the coaxial
cable).
As you route and pull cabling, lollow these general guidelines:
- Bend cables and route them smoothly, and protect the outer skin against any
damage.
- Keep horizontal cables straight and iasten them with cl tie every three to live
leet.
. Bind and lasten vertical cables every six to eight leet,
. Waterprool all connectors between outdoor antenna and coaxial cables with
waterprooi tape to avoid water or other kinds oi damage.
- Be carelul when plugging the connector in so as not to damage the center pins
on the connectors.
1.8 Power up your signal booster
Once all the lollawing precautions have been taken, power on the signal
booster.
i.Verily that you have lelt at least 20 leet ol vertical separation space between
the indoor and outdoor antennas.
2. Never point the lront oi outdoor antenna towards the inside oi the indoor
antenna,
3. Verily that the supplied coaxial cables lrorn both the outdoor antenna and the
indoor antenna are properly connected to the signal booster beiore
powering it up,
4. Careiully plug in the supplied power adaptor into the signal booster where it
is marked ‘DC ‘iZV' and connect the other end to a power outlet.
The LED indicator marked power should light up green.
SIGNAL BOOSTER STATUS
Overview: The booster has a smart startup system. When you have tinished the
booster system installation and power on the booster, it will start its initialization
process to check the received downlink signal lrom the cell site and the isolation
status. This an automatic process designed to ensure its best perlormance. This
will take approximately 375 seconds.
Alter the booster starts up, please check it the coverage is good, it it is good, the
booster system installation is complete. it the coverage is not adequate, please
9/19
11330051
tuiiy reread and understand the LCD, LED indications, controi buttons and MGC
tunction on your booster, as they will help you identify and solve any potential
issues,
- LCD Features
Working Uplink Downlink Downlink
Frequency Garn Gain Output
Power
Reiatlve slgrlai
puweri‘rum lower
status indlcator 0
indicates DC "‘5‘
power slelus
Antenna isolation 0
Status indicator
Band shut otr indicator
Aulomatio Levei Control
(ALEJActlvlty ineieetor
osc sir we»
Band: Shows the working ireouency bands where the booster is operating.
UUDL: Shows reai-time uplink ona downlink gain(dB), These vaiues will change
slightly as the ALC or ISO makes changes to the gain to optimize coverage.
Power: Shows reairtime downlink power(dBm) that the booster is deiivering to
the indoor antenna part. When the booster DL output power is lower than .
ioasrn. the volue will display
ISO: When the system aoes not have enough isolation between the outaoor and
indoor antennas, the "ISO" indicator will be flashing showing that the ISO has
lowered the gain in some bands to keep the system trom oscillating. Press the
"SET" key and the LCD screen will display "ISO" value showing the current band
or hands attected.
ALC: When the booster is receiving too much DL power from the tower and the
DL booster output is ciose to saturating, the "ALC" indicators wili flash showing
that the ALC has iowered the gain to prevent this overioad condition. Press the
"SET" bulton and the screen wili show the band or bands ultected.
10/19
OFF: 1n some rare situufions the ALC or ISO W111 not be able to compensate for an
oscillation condition or a dowm‘mk overload. When this happens me booster will
shut OH in [he alfecled band and the LCD “OFF" 1nd1calorwll1 (lush. Pressmg the
"SET" button wil1disp1ay which band or bonds are allected.
Isn Mun ALE «uh arr «uh
gm UL DL rm vL DL rm UL nL
ma 2 arm 2 Lvma ,
Cellflua a mum a mum
Pcsxm =zsL9m: 2 2mm arr nr
Mama , Ausmz , Ausmz arr
- LED Status
LED Slalus De
Green Normm
Power LED
on DC power pramem
Check coverage, 1eave
. us 1511 “'5 good; Wlhe
Green 0“?“ WW” '5 coverage is poor,
"°‘ "‘“X'mum- please check me
Truub1esheefing semen
\o ger soluh'ans
S1uwF1ashing F n ‘ ‘
Glee" v 0U pu power.
Amrm LED
Quick Hashin
G 9 Guam power Is (00 hrgh. ,
lee" Not workmg proper‘y.
V Manse check rhe
> > The bower umomucalw Trovmeshooung secuon
Qurck Flashrng shms 0“ kn prmecuan horn to 99‘ wrutions
Red excesswe dawnfink signm
Vrom lower.
Green No1aopback or no se1fiosc1l1auon.kamg pmpefly
S1owF1ushing V V
Green Slrgm Iaap back or sellroscflluuon.
Iso LED Quick Hashing Deep 100p back or
Green
Quick F1ash1ng
Red
seHroscfllan'on.
The boosrer amornaneanv
shuts ofl var prmeerian due
to very severe sewroscleim
11/19
Not working properw
Wease check rhe
Tvoub1eshoofing section
m gel sohrrians
11330051
Control Buttons Operation
When lhe LCD is in lhe llxed display mode, press lhe ”SET” key lor more than 3
seconds and it will start up in the Gain Selling Mode, Press the "SET" key lor
more than 5 seconds, and the LCD will return to the iixed display mode. (For
more delails rerer lo Manual Gain Conlrol (MGC) below.
When the LCD is in the alarm display mode, press the "SET" key and the LCD
screen will display the alarm indication showing the allecled band. Pressing the
"lNc+" (or ”DECV") key and the LCD will swilch lo help lips. ll none or the keys
are pushed wilhin 5!) seconds, the display will return la llie iixed display mode.
ll none ol the Control keys are pushed within 5 minutes, the LCD screen will turn
off. Pressing any key will return the display to lhe tixed rnode.
Manual Gain Control (MGC)
Since the boosler has a sell-adaptive sman automatic level control (ALC) and
isolaiian gain processing (ISO), most oi the lime manual adiuslrnenls are rial
required to achieve good coverage. However, in some cases where the ALC or
ISO is working al a very high rate to adjust lhe gain and the Alarm or lso LED is
llashing more lhan once a second a manual adjustment rnighl be desired.
When the LCD is in (he tixed display mode, press the “SET" key lor more men 5
seconds. it will go into me “Gain Selling Mode” and make one or lhe gain
values start la blink.
- Briefly press "SET" key, and the LCD will switch to Ihe next gain vuiue and it wiH
siari lo blink. (Uplink or downlink gain lor a ditterem band).
- Press "lNC+" key once shanly and the gain will increase by 1:13, Press "DECJ'
once shortly and the gain value will be reduced by ion.
. Press ihe "DECJ’ and “wow key sirnulianeously lor more ihon as seconds, ihe
booster will reset the gain lo the delauli rnanulaciurer settings.
- Press the "SET" key for more than 3 seconds, and the LCD wiH return to the
tlxed display mode.
Acluel Gain display MGC Selling Gain
Acluel Power display
Note: When adiusiing ihe goin manually, please ensure ihai ihe uplink gain is
equal to or not 5 dB less than ihe downlink gain selling, This avoids inierlerence
with ihe local cell site tower network.
12/19
TROUBLESHOOTING
Eliminate Flashing iso legend and Quick Flashing Green, Quick Flashing Red iso
LED problems:
i,Adiust the outdoor ontenna direction, keeping it away lrom indoor antenna.
R9510" booster.
2. increase the vertical or horizontal distance between the outdoor antenna and
indoor antenna. Restart booster.
. Use barriers such as walls to increase the isolation.
4. Change the indoor antenna type to an antenna with a more directional
antenna pattern. Orient the indoor antenna and outdoor antenna so they
point in opposite directions.
5. Reduce the boaster's downlink gain using the manual gain controls. Keep
the uplink gain value and downlink gain value the same then restart the
booster,
Note: Uplink gain must be equal to or not less than 5dB below the dawnlink gain,
to ovoid interlerence with the local corrier's cell site nelwork,
Target; The lso issues are solved when the ISO LED is "Green" or "Slow Flashing
Green" or no rloshing ISO legend,
«)4
Eliminate Flashing ALC legend and Quick Flashing Green, Quick Flashing Red Alarm
LED problems:
i. Adiust the antennas' directions or locations to lower downlink received signal
level.
2. Slowly reduce the downlink gain using the Manual Gain Controls.
3. It the above methods don't work, reduce the booster's gain with an external
attenuator in line with the outdoor antenna or replace wtth lower gain
antenna,
Target: The overload issues are iixed when the Alarm LED is "Green" or "Slow
Flashing Gleen“ or no tlashing ALC legend. Please note lhat a "Green" LED
indication may result in smaller coverage area. This can be improved by
adjusting the outdoor antenna to receive a stronger signal.
Eliminate Power‘
is Green:
i. it the signal has not been improved, please check below:
- The weak downlink signal leads to the low output signal level, Change the
direction or position at the outdoor antenna. You may also try replacing the
outdoor antenna with a higher gain antenna to increase the incoming signal.
- Check to see it it is necessary to add more indoor antennas, Barriers such as
walls can block the signal indoors, Vou should also check the booster to make
sure the power is maximized. Try installing more indoor antennas or replace
the booster with a higher powered one,
2. it the signal in a small section olthe building hasn‘t been improved, try the
13/19
legend on LCD and poor coverage problems when Alarm LED
11330051
ioiiowing;
- cneck io see ii ine indoor onienno is insiaiied correciiy. Try moving ine
umenna to improve coverage.
- Try odinsiing ine direction ine indoor onienno is pointing,
AUTHORIZED KITTING OPTIONS
The ioiiowing accessories are auihorized by Ihe FCC Io be used wiih Ihe
Commeniai sax Pro Signoi Booster.
Omdom Antenna 8i Cable Ki! Opfions
xii numbers: ‘HDMDO xii niiniheis "1750300 xii niininm 773mm
Wide Band Direciinnai An‘ennd win nsnei An‘enna win 59 am) N maie FaneiAmeMa win an NW N Mai:
inn in N maie Kil niininm Indium) xii niininm Human
xii .iiiinnm- “-754nn Panei An‘enna win :0 no N nine Paneilm‘emia wiin inn aun N Nixie
wins Baud niienionai Antenna win Kil niininm Brwnwu xii niininsis nssno
75 ADD N nine Wide asnn DivechanaiAnlenna win psnsi/inienna win 75 snu N maie
xii numbzvs: 11750400 100‘400 N noie xii niininsii 775nm»
Wide Band Diimionzi Anmmra win xii niinineis ”sum PaneiAMeMa wiin Si 300 N mm:
on‘ 400 N niaie Wide Band oiecinnsixnienna win xii niinihm 773mm)
x. ninnnns. ”730400 75‘ inn N msis PanniAMcmia win 3E1 300 N mail:
Wide Band Direcliuna‘Amenna win xii numbevSB-Sfllflfl xiiniininus s-Imnn
an 400 N Ma‘s Wide Eand DivsciiuneiANenfla win 0mm nimnionzi Amnmra win
xii .iiimom “Juliana Si in N mm: me am: N ma‘e
Wde Band nireaionaiAnienna win Kil numbev§§'30.flfl xiiniininsi; sqswn
1nfl‘ 3m N maic Wide Band DimctmnaiAnlnnnz wiin unini Direcliunai Anienns win
KiK numb-vs: mama an inn N niais 75400 N inoie
Wide Band Dircdianz‘ Antenna win xii niinineis 57100300 xii minibus 575mm
15 non N nine Wide Band nieciinnaixnienna win omni nieciionoi Anienna win
xii numblvs. “7503011 inn 300 N maie SEI'AOD N Main
Wide aann Dire-:liunaiAmenna win xii niinineissqsann xiiniininus s-Jnum
5n eon N moie wine Band nieoiinnaixniennawin umni Dimcliana‘Amann: win
xii numbus‘ “730300 75‘ znn N mail: SU'AOH N main
Wide Band DirectionaiAmennd win Kil numbevSB-Sfllflfl iniininsis srwnxnn
3n sun N nisis wns Band DivsciianaiANanna wiin Dmm niienionzi Anienno win
xii .iiiinnm-irinnninn on 300 N Mai: 100‘300 N nioie
psneiixnionna wiin inn inn N man, Kil niininm srznznn xii numbers 57753011
xii numbus'mdsflm Wide asnn oiieoiinnamnrenno wiin oinni Direciinnai Anienna win
ponemnienns win 15‘ mo N maie so am N moie 75- 300 N maie
xii numb!r§“flrSMflfl xii numbers HOME!) xii "imam 575mm:
PaneiAnlemia wiin 5n non N moie Fanei An‘enna win ion mi) N md‘E uniii Direclioiiai Antenna win
xii .iiimominmnn xii niinineis mm su' 30m N main
Panei innni Anienna win an 400 N maie FaneiAmenna win 79‘ mo N niais i niininm s-annn
xii numb:vs“0400300 xii niinineis union 0mm Dircdianai Anmmra win
PaneiAnlenna win 100‘300 N mine FaneiAmenna win 50‘ mo N niaie 3a' 30a N mine
xii numbnsJDJSZOD
woneixnienna win 75 son N Ma‘s
Indoor Antenna & cable Kn Options
xii numburml-malfln-Sfl xii minions 13-154nn-5n xii "imam aa-Iamnn-sn
PaneiAnlemia witMDD‘ 400 N maie Panei Amenna Wilh75' 400 N non Dome Antenna wininn 400 N Ma‘s
s. a 5n anni zrway snhflzr an SD onni May sniiisi is a an (inn arway sniiiei
14/19
xix numbumnzflswflrsn
roneionixnno wmfls‘ ooo N mm:
s a so om may Sumter
xix numb:vs.‘03400w0750
Pane‘Anlenna Wiimoovaoo N moo
z. a so Chm JrWay Sleev
xxx numbus‘madilnursn
pexemxxem wim75‘ mo N maie
a. a so Ohm :rww Sphnnr
xix numbumnl-Smnn-Sn
FanmAMnnna Wiinso‘ ooo N mic
ax a so om may Svhfler
xix nomboxmounonoso
Fonemnienno wimo Aim N moie
o a so onm sway soiixxex
xxx numbers‘WLWOflDUrSO
PaxeiAxxenna wi‘MOfl' 40o N mo
1. a so am Axwzy Sphnnr
xxx numbux"M7SOnn-Sn
oanoimiom Wims‘ ooo N mo
a. a so om away Sphfler
xxx numbnmmsnwmsn
ronemnim Wiinso‘ Ana N mm:
o a so om ArWay Sphller
xix numbnsJuaulnflrsn
Pane‘Anlenna Wimo‘ aoo N moie
z. a so om 47w.” Sleav
xxx numbus'WZ-mflzflfl-Sfl
paiisioiuem Wiwoo- 30D N maie
s a so Ohm 27w” Sphner
xix numbnmflz’lflnflrsn
FanmAMnnnz wim75‘ zoo N mic
ax a so om may SDh‘ler
xix numbevsJflirWoZooéo
Pane‘Anlenn-a wimmfi' soo N moie
o a so om srwxay Sphxler
xxx .xomomiozosaooso
PaxeiAxxemia wi‘h75‘ soc N maie
s a so am waay Sphnnr
xxx numbung-Sfllnn-Sn
oanoioniom Wiinso‘ soo N moo
s a so om sway SDMler
xix numbzvmmwfliflflrsfl
ronemnixnno wiwou' son N main
is a so om ArWdy Sumter
xix numbev Juflaflarsfl
Poneionxenna wi‘h75‘ ooo N no
1. a so am Axway Sphflar
xxx .xximom-m.sozoo.so
paiiaioiuem Wiixso suo N mic
is a so Ohm 4-way smmxx
xix numbuxfllmwuin
raneionixnno Wiimou-aoo N mm:
s a so Ohm 27w” svhuer
xix numbevler‘lSMDrso
Ponemmenno wi|h75‘ 4m) N moie
z. a so ohm May soiiixex
xxx numbus‘flrmmnflrsn
PaxeiAxxeuna Niwoo'ooo N maie
a. a so am :rww Sphnnr
xii numhzvi Ramona»
oanomnimo Niinso «on N mix
5 a so om may svhuer
xii numhevs urzoooorso
Panemniemxo Nimso 400 N moie
s a so Ohm sway SDhuev
xix numbevs urmmnnrm
omi Amerine Nixmoo‘ 4oo N msie
o a so am“ ow“ somox
xii nomoxxx 7A-75wn-5n
omi An‘cnna wws‘ 40o N mam
a. a so am may svhuer
xii numhevi ursoworso
oanemmemxo Niinso ooo N moie
a. a so Ohm 47an SDhuer
xix numbevs Maoaoorso
Panei Ameuna wilhlfl‘ ooo N mo
5. 2 so Ohm Huey sowing
xii Humbug momma—so
Farm Amenna Niimoo‘ Jun N mo
.1. a so am zrway Soiiuox
xii numhevi zzrzssoorso
Panemn‘enna wms zoo N moi:
s a so Ohm may svhuer
xii nombexs Yarlanannrsn
Panei An‘enna wilhmo‘ soo N moie
s a so am 37w“ Sphuev
xix numhus 73-753Im-SI)
osnoi Amerina wows soo N maie
o a so om axway Sphnev
xii nomoxxx zarsozoorso
ommmm Niinso mo N mam
a. a so am may svhuer
xii numhevs varsosooso
Panemniemxo Niioao son N moie
s a so am smay Sphflev
xix numbms urinnmorso
Panei Amenna Nimioo‘ zoo N me
a. a so am“ Huey Sphncv
xii Humbug Nassau-5n
omi Mom Nims‘ 10o N maio
a. a so am orway Svhuev
xii numhevi urinznnrsn
Pane‘lm‘emva Niinso zoo N moie
s a so Ohm ArWay Svhuer
xii numbers maozoorso
Pane‘ An‘enna mom son N me
o a so am woay Sphuev
xix noxious 3-InMnn-Sn
Dame Amsuna Wixmoo 400 N mais
xix Rumbas somoso
Dome Avvlenna mm 75‘ we N maie
xix numbevs arsaworsa
Dome Amenna With so‘ ooo N maie
xix numbevs zuootoorso
Dome Amenna Nimioo‘ 400 N meie
a. 2 so Ohm May sowing
xii Humbug Homo—so
Dams Amanna Wims‘ Aim N mo
.1. a so am zrway Soiiuox
15/19
xii numhzvs zusoooso
Dome Amemva wws- Mm N mi:
3. a so mm arWsy SDhller
Kll numbevs zarsadnosn
DnmeAn‘enna withsa' ooo N mo
1. a so Ohm sway 59mm
xix numbus azraunumsu
Dome Amerma Nixoso' 40o N maie
s a so am May soiiixox
xix numhzvx zunnum-sn
Damn Amemva Niimuo ooo N mic
a. a so om ArWay SDhAler
xii numhlvs susoooso
Dome An‘enna wiws' ooo N moi:
a. a so om «way sooner
xix numbevs zosvooso
Dome Amenna Wimso' 40o N maie
x a so am «may Sphucv
xxx .xomoxxx ouoaooso
oomo Ameniva Niiosu- Aim N mix:
as a so am away Sumter
KM numhzvs srwnxnnrsn
Dome Amemva Wiimoo‘ soo N mm:
xii numhzvs zasznursn
Dome Anienna won 75‘ zoo N mm:
xix numhzvs zzrinnsnnrsn
Damn Amemva Niimuo zoo N mic
a. a so om may SDhller
xii numhevs snssooso
DnmeAn‘enna wiws' soo N moi:
a. a so om ZVWay sooner
xix numbys yzrsozouso
Dome Amevma mom son N maie
s s so am 27w“ Sphncv
xxx .xomoxxx “domino
oomo Ameniva mmu‘ zoo N mix
a. a so Ohm zrwav Sphller
xii numhzvs sarinusuursu
Dome Amemva Wiimoo‘ soo N mm:
a. a so om sway sooner
Kll numbevs saasamso
Dame An‘enna was soo N mo
3 a so Ohm May 59mm
xxx numhux 31-Su3un-Su
Dams Amerma Nimsu- sou N mo
5 a so am away swim
Kil numhzvs zsrsosmrso
Dom: Amen": Niinso- aim N mam
a. a so 0m May SDhller
xii .xomoxxs suooaonrso
DnmeAn‘enna Wiimoo‘ soo N moie
a a so om ArWay Sphuer
xix numbus ausaooso
Dome Amerma wows soo N maie
s s so am «may Sphnm
xix nomoxxx zuoaooso
Damn Amemva Niioso- 3am N mam
a. a so om ArWay sphller
xii numhzvs usosooso
Dome An‘enna mom son N mi:
3. a so om «way sooner
11330051
FCC RF EXPOSURE STATEMENT
This equipment complies With FCC radiation exposure limits set iorth ioi an
uncontrolled environment, End users must iollowthe specilic operating
instruction lorsatislying RF exposure compliance, This transmitter must not
be Coclocmed oroperating in coniunction with any other antenna or
transmitter.
IC RF EXPOSURE STATEM ENT
The device is compliance with RF exposure limits. The minimum distance irom
body to use the device is 20 CM.
Le present appareil est coniarme aux coniaimite ou aux limites d‘intensllé de
champ RF. La distance minimale du corps a utiliser le dispositii est de 20 CM.
WARNING AND STATEMENT
This is u CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE WlIh your wlieless piovldei and have
your providers consent. Most Wireless providers consent to the use oi signal
boosters Some providers may not consent to the use oi this device on their
network it you are unsure, contact your provider
In Canada BEFORE USE cu must meet all requirements sel out In lSED CPCch1cUS.
You Must operate this device with approved antennas and cables as specilied by
the manuiacturer. Antennas MUST be installed least 2n cm (3 inches) irom ie.
MUST NOT be installed within 20 cm oi any person.
Vou must cease operating this device immediately ii reauested bythe FCC(or lSED
in Canada) or a licensed wireless service provider.
WARNING E9ll location inloimation may not be provided or may be inaccurate lor
calls served by using this device.
Thi device may be operated ONLY in a lixed location ie, may operate in a iixed
location only let ih-building use.
Note; This equipment has been tested and iound to comply with the limits tor a
Class B digital device, pursuant to Poll i5 oi the FCC Rules. These limits are
designed to provide reasonable protection against harmiul inteiierence in a
residential installation. This equipment generates, uses and can radiate radio
lrequency energy and, il not installed and used in accordance with the
16/19
instructions, may cause harmlul interference to radio communications However,
there is no guarantee that interielence will not occur in a particular installation.
it this equipment does Cause harmful interierence to radio or television
reception, which can be determined by turning the equipment on and an, the
user is encouraged to try to correct the interierence by one or more oi the
tollowing measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit ditlerent irom that to which
the receiver is Connected.
- Consult the dealer or an experienced radio/TV technician ior help.
Changes or modilications not expressly approved by Huaptec could void the
user‘s authority to operate the equipment
Note: For a complete list at antennas and cables approved lor use with these
boosters see Authorized Kitting Options page 14,
FCC 27.sc(d)(4)5taternent: Fixed, mabile, and portable (handheld) stations
operating in the 17mins MHz band are limited to i watt EIRP, Fixed stations
operating in the 1710-1755 MHz band are limited to a maximum antenna height
ot i 0 meters above ground.
FURTHER INFORMATION ON SIGNAL BOOSTER END-USE REGISTRATION
The tollowing is currently active contact ot us wireless provider lor booster
register.
hItps://Www,u$ce||u|urtcom/usce||u|ar/support/lccbooster-registrationtisp
https://www.sprint.com/Iegai/lcc_boosters.htmi
https://www,verizonwireiess.com/soiutions-und-services/accessories/register-
signuirbooster/
https://suppoll,t-mobiie.com/docs/DOC-9827
https://securec45.securewebsess‘ion.com/attsignaIboaster.com/
lc Statement
This device complies with Innovation, Science and Economic Development
Canada ICES-003 Compliance Laoel: CAN ICES-3 (B)/ NMB-BtB).
Le present appareii est conlorme Innovation, science or developpement economique
Canada lCEseoos Etiquette de contormite: CAN ICESJ (B) / NMBes (E).
Link to CPCVZ 705
http://www.ic,gcca/eic/site/smtegst,nst/eng/sioavnhtmi
17/19
flfismasr
SPECIFICATION
RF Pammela Uplink DDwnlInk
700 MHZ Band 11/17 696—716 MHZ 728—7“ MHZ
700 MHZ Eand1§ 776—787 MHZ 746—757 MHZ
Fvequency Range sou MHz Band 2324—3»; MHZ 869—894 MHZ
PCSWDO 1850—1915MHZ 1730—1715 MHZ
AWSZIDD 1710—1755 MHZ 1110—1155 MHZ
700 MHZ Band 12/I7 18MHZ
700 MHZ Band 13 1| MHZ
Band width (:91le 15 MHZ
PCS'I 900 65 MHZ
AWSZ1DG 45 MHZ
Max Gain 70 (18
Max. output power 17—14 dBm 15 dBm
MGC (Step Allenumion) — 25 dB/1 dB step
Power SUpp‘y Inpul AC Ian—240 v, 50—60 Hz, Ouxpm DC 12 v / 3 A
1npUl & Ompul Impedance 50 ohm
1 /0 km NrFemzfle
Dimensions 11‘7V3‘Z.1imhl130‘|35’55 mm
WewghI & I1 lbs/5 kg
18/19
PRODUCT WARRANTY
SUrDay MoneysBack: All HiBoost products are protected by a ”day money
back guarantee. it lar any reason the performance oi any product is not
acceptable, the product may be returned to the reseller with a dated prool ol
purchase,
Hear Warranty HiBoost Signal Boosters and kits are warranted tor 3 years.
Customers can choose to return the Signui Boosters and kits directly to the
manulacturer at the purchaser's expense with a dated prool or purchase and a
Returned Material Authorization (RMA) number supplied by HiBoost.
HiBoost wiil supply two options: repair or replace. HiBoost will cover the cost at
delivery lor the consumers located within the continental us.
This warranty does not apply to any Signal Boosters or kits determined by
HiBoos! to have been subjected to misuse, abuse, negleci, or mishandling that
alters or damages physical or electronic properties. Failure to use a surge
protected AC Power Strip with at least a 1000 Joule rating will void your
wananly. Damage caused by lightning is not covered by this warranty.
All HiBoost products that are packaged with other HiBoosl accessory products
are intended lar resale and used as a single integrated system. Such product
kits are required to be sold to the end users or subsequent reseller as packaged.
EMA numbers may be obtained by contacting Technical Support (1197278707
5666.
HiBousl USA
we N Belmne Rx Ste H“, \rw ,Tx 75%:
Wane/Fax. (972) 87075566
> 7fo®hwbuustusa om
chalu www.mboos usa um

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 窦杰
Create Date                     : 2017:06:20 09:24:31+08:00
Modify Date                     : 2017:06:25 16:15:27-07:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : 窦杰
Title                           : Commercial 30K说明书-128克彩色双铜 - 认证.cdr
Creator Tool                    : CorelDRAW
Metadata Date                   : 2017:06:25 16:15:27-07:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:810115a9-a933-419e-8fd0-ffe6581af6e9
Instance ID                     : uuid:41dd10b3-1a83-4846-b251-47db2aed5bac
Page Count                      : 20

EXIF Metadata provided by EXIF.tools