HUANG BO TOYS FACTORY HB-PY43-24G BUMPER CARS User Manual

HUANG BO TOYS FACTORY BUMPER CARS Users Manual

Users Manual

Download: HUANG BO TOYS FACTORY HB-PY43-24G BUMPER CARS User Manual
Mirror Download [FCC.gov]HUANG BO TOYS FACTORY HB-PY43-24G BUMPER CARS User Manual
Document ID3572067
Application ID1sgG/1gONfUO2JIrxmbk1w==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize118.36kB (1479492 bits)
Date Submitted2017-09-20 00:00:00
Date Available2017-09-20 00:00:00
Creation Date2017-09-12 19:23:34
Producing SoftwareAdobe Acrobat 11.0 Image Conversion Plug-in
Document Lastmod2017-09-12 19:23:37
Document TitleUsers Manual
Document CreatorAdobe Acrobat 11.0

® 1:43
INSTRUCTION
1:43 SW4” R1”? O‘Rf
Thank you for choosing our toys! Please read through this instruction manual before use as it
contains all the information you need to know about how to correctly, joyfully use this product.
A PRECAUTIONS:
- Electric Product
Do not give this product to children aged 6 or below. Like other electric products, this product is also to be used in a
safe way to avoid electric shock.
- Adult ' s Supervision Required
Warning! Do not try to modify this product, which may void your right to use it.
Home
(1) The new Ni-Cd battery pack included in this set needs to be charged before use.
(2) Plug the charger to a wall outlet and join the battery's connector and the charger's connector.
(3) Please charge for at least 8 hours for the first 2 times. Then, it's enough to charge for 5—6 hours during normal
use. Do not overcharge as it will not fill the battery with more power.
(4) Please check on a regular basis the wire. plug and other electric parts on the toy. batteries and charger. If any
damage is found, please repair it before use.
.llSMITTER x. TRIMMER
staring
/ Whni
/ Fln- tuning
Indicator
Light
onion rm Nan-1|-
Bur
OWN 2x1.5v”AA"
‘ALLATION 0F BATTERIES & ANTENNA
(1) Replace the battery cover.
(2) Locate the hole on the top of the transmittertor installing the antenna Insert the antenna in and turn clockwise to fix it
(3) Correctly install the rechargeable battery pack ln the battery compartment and replace the battery cover
(4) Fasten the screw With a plus driver.
How to install battery in the car The car must charge with HOW to install battery in the car
the spectal charger, be sure , , I. I.
that the technology parameter I I I ,,3_3;;-,5,)(,,,AAA,,,,,
l5 rii fur the chargerth net i i i
help youselves to match
a charger,
lit"—
‘ .. .
-||]a
Included
.lfc OPERATIONS
(1 ) Turn on the car and set the band selectors on the transmitter and the chassis to the same position.
(2) Use the 2 control levers on the transmitter to control the car to run forward/backward or to turn left/right.
(3) If the car can't run along a straight line, please use the trimmer on the chassis for adjustment.
(4) Remember to turn off the car and the transmitter after use.
.‘ERY SAFETY
1)Adult's supervision is required for charging.
(2) To charge the rechargeable battery pack in the car, first remove it from the chassis.
(3) Timely remove exhausted batteries from the car and the transmitter.
(4) Make sure the main switch is set to OFF before installing the battery pack into the car body.
(5) Note polarity marks in the battery compartments when installing the batteries.
(6) Do not tw to charge non—rechargeable batteries.
(7) Do not short-circuit the batteries.
(8) If you plan to stop use for a long time, remove the batteries from the transmitter and the car body to avoid leakage.
(9) Never throw the batteries into fire to avoid explosion or leakage.
(10) Do not mix batteries from different producers or new and old batteries.
(11) Use only recommended batteries or equivalent ones.
(12) Check the batteries on a regular basis to avoid leakage.
(13) Keep this manual well for future reference as it contains important information about this product.
1 a. MAINTENANCE
(1) If you plan to stop use for a long time. remember to remove all the batteries.
(2) If necessary, use a wet towel to gently wipe the car body clean.
(3) Do not expose this toy to high temperature. high humidity or direct sunlight.
(4) Do not put this toy in water to avoid damaging its electronic components.
-\ cAUT IONS
‘When the car is in motion, do not touch the wheels by hand to avoid damages to the car.
Do not play by the roads or in any other
dangerous places to avoid accidents.
Do not bend the antenna or point it at other
people or articles to avoid hurts.
Do not play in a place with puddle,
mud or sand.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-— Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:09:12 19:23:34+08:00
Creator                         : Adobe Acrobat 11.0
Modify Date                     : 2017:09:12 19:23:37+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:09:12 19:23:37+08:00
Creator Tool                    : Adobe Acrobat 11.0
Format                          : application/pdf
Document ID                     : uuid:2e3f05d1-beb5-4b91-8744-3a2e7120fcc2
Instance ID                     : uuid:5aba8994-c005-41b2-9fa8-3660b2c7971e
Producer                        : Adobe Acrobat 11.0 Image Conversion Plug-in
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ZY3-HB-PY43-24G

Navigation menu