HUBSAN INTELLIGENT 501SRX FPV X4 brushless User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2863487
Application ID	9eppNItEvNSneaH56YFfyA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	369.81kB (4622658 bits)
Date Submitted	2016-01-05 00:00:00
Date Available	2016-01-08 00:00:00
Creation Date	2015-11-04 18:11:35
Producing Software	Adobe PDF library 10.01
Document Lastmod	2015-12-24 11:47:23
Document Title	User Manual
Document Creator	Adobe Illustrator CS6 (Windows)

Ages 14+
UBSAN READ THE \NSTRUCT‘ON MANUAL CAREFULLY
THE HUBSAN X4 FPV
BRUSHLESS
ITEM NO H5013
FOLLW ME FUNCTION AND RTH FUNCTION SEE PAGE 17-19
Hubsan FPV X4 Brushless
m ZlJl‘riil
Please read the instruction manual Carefully!
IMPORTANT SAFETY NOTES
OPERATION
Be extremely carelul and responsible when uslrlg the FPV x4 . Small electronic components
can be damaged by crashan or try dropplng the x4 in water. To avoid turther damage to the
unit. people. or property. damaged spare pans should be replaced in time.
Flight
ITake responslollty tor your satety and the salely oi others when you fly the x4 l
. Do not fly the x4 in crowded places lt needs plenty oi space to operate
. Do not fly in oad weather
I Never try to catch the X4 whlle ll l5 In fllght
.Thrs model is intended for experlenced pilots age 14+
- Power oli the x4 alter light, to prevent the propellers lrorn causlng Inlurles
-Always remove the battery afler you stop liying to avold Injurles lrom accldenlally powerlng
on the motors.
.Always use great caution to protect yoursellwhen near the propellers The llight system
wtll start after
. power on regardless otthe transmitter slgnal. The hlgh speed propellers are very dangerous.
Power otlthe x4 after every flight or the propellers may still rotate and cause lnlury.
SYMBOL EXPLANATION
® No operatlhg A lmponaht Notice
_ lnstructlon a Explanallon. relerehoe
USAGE ADVICE
Hubsan provides you with two llles
t ”Disclaimef‘
2 “ User Manual‘
Please view the instruction videos and Disclaimer first. then read the manuals
LIPO BATTERY SAFETY NOTES
llthe x4 doesn'l in use for a week or more please store the battery approxima|ely 50%
charged to maintain battery perlormance and battery lite
if SAFETY ADVISORY NOTICE
Lithium-Polymer (LiPo) Battelles
LiPo batteries are diherent lrom conventional batteries in that their chemical contents
are encased in a relatively lightweight toil packaging. This has the advantage at
signlflcantly reducing theirweight, but does make them more susceptible to damage it
roughly or inappropriately handled As With all batteries, there is a risk attire or
explosion it safety practices are ignored
Charge and store LlPo batteries in a location where a battery tire or exploslon
(including smoke hazard) Will not endanger tile or property.
Keep LlPo batteries away trorri children and animals.
Never charge the LlPo battery that has ballooned or swelled.
Never charge the LlPo battery that has been punctured or damaged
NEWS]
Atter a crash, lrlspecl the battery pack tor signs or damage Discard in accordance
With your country‘s recycling laws
Never charge the LlPO battery in a moving vehicle
Never overcharge the UPC battery
Never leave the LiPo battery unattended durlng recharging.
Do not charge LiPo batteries near llammable materials or liquids
SEEK
Ensure that charging leads are connected correctly Reverse polarity charging can
lead to battery damage, fire, or exploslon.
Have a suitable fire extinguisher (electrical type) OR a large bucket otdry sand near
the charging area Do not try to extinguish (LlPo) battery tires With water.
lzl Reduce risks trom tire/explosion by storing and charging LlPo batteries inside a LlFo
charge sack.
lzl Protect your LlPo battery trom accidental damage during storage and transportation.
(Do not put battery packs in pockets or bags where they can short circuit or can
come into contact With sharp or metallic ob)ects )
llyour LIPO battery is sub)ected to a shock (such as a crash), place it in a metal
container and observe (or signs of swelling or heating for at least 30 minutes
lzl Do not attempt to disassemble, modily, or repair the LIFO battery
it ems
INDEX
\MPORTANT SAFETY NOTES
SYMBOL EXPLANAT‘DN
USAGE ADVICE
LIPO BATTERY SAFETY NOTES
\NDEX
\NTRODUCT‘ON
1 ITEMS INCLUDED IN THE BOX
2 QUAD COPTER
21 thm Camml System Intraductmn
2 2 Quad Comer Mular Led IndIcaloT
3 QUAD COPTER BATTERY
31 IntroducIIon
3 2 InstaII Ihe Banery
3 3 Chargmg
4 PROPELLER
4.1 Introductmh
4.2 Assemny
4.3 DIsassembly
5Trar15mmer
5 1 Input key IuncIIon
5 2 InstaII the Tx battery
5 3 Transmlflercahbratmn
5 4 Frequency selectame 5 Benz
02
02
02
03
05
05
DS
06
06
07
07
07
07
06
08
03
06
09
10
1 1
1 1
12
6 START To FLY
61The FIIght Enwmhment
6 2 Check Before FIymg
6 3 The Lmk 01 The TransmItteT
And The Quad Comer
5 4 Compass Calmramn
7 START/ STOP THE MOTORS
3 BASIC FLIGHT
9 ADVANCED PERFORMANCE SETUP
9.1 Revevsmg channeI semp
s 2 SensIIIwa set up
9 3 Set manuaI setup
9 4 Head‘ess Mode
9 5 FoHow Me Mode
9 8 RTH MODE
9 7 FATLSAFE MODE
1o OPTIONAL TRANSMITTER
H5015 TROUBLESHOOTING
FCC \nlormalion
12
13
13
13
13
14
14
16
1e
16
16
17
17
18
13
19
20
21
31-1; tfifin e
INTRODUCTION
Thank you for buylng the HUBSAN quad copter. The x4 quadoopter is deslgned as
an easyrmruse‘ fuIHeatured RC model, CapabIe of hovering. fast forward and
aeroballc "Igm maneuvers Please read the manual carelully and follow all the
lnslrucllons Be sure to retain Ihe manuaI for fulure reference routine maimenance
and tuning.
EH FPV: First Person VIeW Funetlon enabIes you to experlence every live moment ol the IIlghI
from the quad‘s vlew.
1. ITEMS INCLUDED IN THE BOX
Check all the items ln the box before use.
SIN Part Name Phulos Q'Iy Remarks
1pc Equlpped wiIh smart llignt
canIroIler,GPS and compass
1 Quad oopler
PropellerAApcs, Propeller
apcs B 4m
2 Propellers
FPV Transmitler, equlpped
“’9 wml A x AA battery (Not lncluded)
4 Transmltler
5 7.4VLiPooattery _ 1pc Forquadcopter
1pc Use to recharge the UFO battery
1 PC 1 10-240V
Inserted into the quad comer
5 4G TF card 1P0
3 Assistant wrench 1P0 For removing propsIlers
DISCIalmer
Hubsan X4 Instructlon Manua‘
5 User ManuaI ZPCS
2. QUAD COPTER
[1]
[2]
[3]
[A]
[ilpropellera [ZlepeIIerA [3]Molur [41MoiorLEDinoieaior [5]UpperbudysheII
[leowerbodysnell [7]1080PHDCamera [B]Ballerycomparlmenl [slTFcardplug
2.1 FLIGHT CONTROL SYSTEM INTRODUCTION
The quad coolers llignl conirol syslern wiln a builtrln GPS and compass lnal is used to
conlrol lne quad Copter‘s funcllorls sucn as ascend and descend, oilcn and roll.
Modules on flight control 5mm Function
Main Conirol Module CPU onne nignl conlrol sysiern, connecis lo all lrie
modules lor ceniral control processes
‘MU Modu‘e lncluoes inenial sensor, sIabilizes lliglii, includes a bammeier
to measure the I'IlghI alliiude
cps & Compass Mudule Pusilion huld and Navlgation
LED Indicator lnoicaling lne lligni conlrol sysiern's candltlon
2.2 QUAD COPTER MOTOR LED INDICATOR
lnoicalor Slalus
1. Power on 4 LED indicalors blink in while slmultaneously
2. Compass callbiaiion: 4 LED indioaiors blink in yellow cycllng
3 FllghI 4 LED lndlcalors blink simulianeously, 2 Iront LED lndicators keep blink in while and
me 2 back LED lndlcators blink Colors are as lollowmg:
i) Sianoaro: blink in yellow
2) GPS blink in green
3) HOME: blink in blue
4) Baliery in low capaclty: blink in red
3. QUAD COPTER BATTERY
3.1 INTRODUCTION
The quad cobter battery ls a rechargeable lrpc battery with 2700mAh capacity and 7 4v voltage.
The battery should only be charged with the HUBSAN charger.
3.2 INSTALL THE BATTERY
Push the battery into the battery compartment correctly and connect the battery plugs ln
correct bolanty. Close the battery compartment cover.
3.3 CHARGING
Connect the battery to the balance charger and wall charger The balance charger
inctrcator ls in solid red when charglng and Iums solld green when the battery ls fully charged
It takes around 150 minutes to lrnish the complete charge.
I]
A Pls lolly charge the battenes to avoid loss of control due to low voltage
t« mm:
4. PROPELLER
4.1 INTRODUCTION
The quad copter uses the 7 3-inch propellers which are marked by A and a Damaged
propellers should be replaced in time to malntaine the good perlormance
propellerlt propeller o
Diagram
lhstallalron Ppsilrpn
LOCK: In this dlreclloh‘ tighten the propeller onto the motor shaII
UNLOCK In this direction, remove the propeller from the motor shaft
«9.
Symbol explanation A}
\T
4.2 ASSEMBLY
Assemble the propellers on the motor threads that marked the same letler and lock them
according to lhe lnsIrucIlnn way
4.3 DISASSEMBLY
Deadlock Ihe mumr with lhe U wrench
Remove the propeller by rotating it counter—clockwise
to unlock
A o The propellers are deslgned to tighten automatically. Do not overllghIen the screws and do
not use any lype of screw glue
. Make sure that the A and B propellers are ihslalled correctly The x4 will noI lly If
propellers are improperly ihslalled
. Wear gloves when install the propellers lo avoid scralches lrom lhe Ihlnr sharp propellers
5 TRANSMITTER
LCD
12 GPS SW 13 RTH SW
8 Photo
4 Elevator Trrm
(2) Erevator/Rudder Stick
9 Vldeo
a Throme Trim
(1)anome/A11eron SUCK
7 Power SW
3 AHeron Tnm
5 Rudder Trim
1o Vldeo grasses socket 11 T; can: plug
No lunctlcn 14 use Plug
LCD
12 GPS sw 13 RTH sw
8 Photo 5 W”
6 Throme Trim
1 Thrume (Rudder Stick
4 E‘evator Trim
2 E‘evamr/Arlemn Suck
7 Power SW
3 Afleron Tnm
5 Rudder Trim
(MODE 2)
5.1 INPUT KEY FUNCTION
SIN Model Control Function
Push the stick ionruard or backward and the ouadcopter WM
(1) MOD“ d d dP hthtklltr ht dth d tr
Mame/Mm" SW ascen or even r us e s to e o no an e qua cop e
will lly leh or right.
MODE 1 Push the stick ionruard or backward and the ouadcopter wrll lly
(2) ElevamRudde, SM torward or backwardzPush the stick lelt or nght and the quadcopter
will rotate in counter clockwise or ln clockwise
MODE 2 Push the stick tonruard or backward and the ouadcopter WM
1 WWW Rudder SW ascend or‘decendl Push the stick lelt or nght and the duadcopter
will rotate in counter clockwrse or ln clockwise
MODE 2 Push the stick lorward or backward and the quadcopterwrll fly
2 Elevator New" suck toward or oaekwardPush the stick leh or rlghl and the ouadcopter
will lly lelt or nght
3 Arleroh Trim Arleroh tnnr adlusls lor lett and right drrlt
4 Elevator Trrrn Elevatertnm adlusts for tonruard and backward drrrt
5 RudderTrirn Rudderlnrn adlusts tor drill ol left and rlghl rolatlon or yaw
5 Tmme anrr Throttle mm normally lelt at neutral. The lowertnm turns LEDs
on and off
7 Power Swltch Push to ON to turn on the transmitter Push to OFF to turn oil
3 Photo Press the photo button to shoot a photo,
9 Vldeo Press vrdee button and start the record and press agaln to step
10 Weo was“: socket Connect Hubsan vldeo glasses which not lncluded and need
purchase
The TF card can be inserted into the card plug on them or the
11 TF card plug quad comer
(Recommend on the quad copter)
Push the switch up, the oulrt—in GPS will calculate the quad
12 GPS sw copters position and helghl and help to lack the quad copter in a
stable houer (ONLY FOR our DOOR)
Push the switch up, the quad copter will return to the takeotl
13 RTH SW pornt automatically ( ONLY FOR OUT POOR)
14 usa plug Only for engineerto upgrade the soltware, please do not use it to
connect computer
a'm‘rti‘ram
10
5.2 INSTALL THE TX BATTERY
InsIaII 4 x AA paneries RepIace cover
according 10 me current polamies
Remove the cover
. Do ncI mix oId and new baltenes - Do not mrx dwerenl types oI baItenes
. Do no! charge non-rechargeable baflery
5.3 TRANSMITTER CALIBRATION
Mode 2: Push Dom stlcks to the upper Iefl posmon and power on me Iransmllter slmu‘alenousn
\y,rotate both sucks twrce Hum down any mm unm Ihe LED on Ihe transmlltsr bhnks m red,
mdicating a successfm Cahbranon
M01191: Push the Mt suck to me upper Iefl pusmon and ”gm suck to me upper nghl posmon
and power on me transmllter swmu‘alenous‘y, rolale bolh sIIcks Mice Hold down any Irlm unIII
Ihe LED on Ihe transmllter bhnks m red, Indicating a successfm cahbranon
A You (an (hangeme mode as you like by foIIowmg me above memod
1 1 I mm em
5.4 FREQUENCY SELECTABLE 5.BGHZ
The transmilter win aulumalicauy find Ihe best Vrequency to ensure a qualily live video
Iransmxssion In case any imerfsrsncs.please rs-se‘sctths frequency horn 5730MHZ Io
5345MHZ to get a better video transmission
Pul‘ (he Ihrume slick In Me \owes1 position and long press Ihe E‘evator slick to enter into Ihe
MAIN MENU inlerface Push Ihe E‘svator slick up/duwn Ia se‘ect ~5 as Frequency”, push the
stick n'ghl Io snlsr inlo me ' 5 as frequency" inlsrfacs. selecl a matched frequency
49 M2
—
Sex Emmi: h
set sensmvuy >
Sun Mmm b
Enl b
When assembly is finished, p‘sass auow yoursemo get some pracuces or traimngs bsbre (he
firsmgm. Flight simulators are highly recommended P‘ease fly your x4 in a sale and open
place.
12 \ mm mm
6.1 THE FLIGHT ENVIRONMENT
(1) The tlying area should be open and without tall buildings or other obstacles; the steel
structure within bulldlng would interlere With the compass.
(2) DO NOT lly in bad weather such as strong wind. heavy snow. rain or loggy day.
(3) Keep away tram barriers. people. power cables. trees. and other obstructions.
(4) Do not tly near radio towers orairpons
(5) The x4 control system wil not work properly at the South or North Pole
(6) DO NOT fly in restricted areas and please tollow your country's laws and regulations.
6.2 CHECK BEFORE FLYING
(1) Make sure the batteries or the transmitter and the x4 are tully charged.
(2) Make sure the propellers are lrlstalled correctly and tightly
(3) Make sure the memory card is installed and has sul‘flclent room remaining tor recording.
(4) Make sure all motors work property
6.3 THE LINK OF THE TRANSMITTER AND THE QUAD COPTER
The transmitter and the quad copter are linked berore delivery. Should you change the transmitter
or the quad copter. reallnkage is required
Procedures
1 Press the photo lunction button and turn on the transmitter simultaneously. waiting for the
initialization. “ System initialize" letters display on the LCD
2 Release the photo Iunctlon button. “Blnd to Plane" letters dlsplay on the LCD.
3 Power on the quad copter. place it close to the transmitter, the linkage matched indicating by a
beep" sound
4 Should the linkage not match. please repeat the above steps.
6.3 COMPASS CALIBRATION
Compass calioration is requlred belore the first time fllgtlt otherwlse the system may not work
properly The compass is very sensitive to elemromagnetic interference which can cause
abnormal compass data and lead to poor llight pertorrnance or even tlight tailure. Regular
calibration enatiles the compass in optimum perlormance
e - Do not callbrate the compass in a strong magnetic lield
- Do not carry ferromagnetlc materials With you while calibrating the compass.
such as keys. cell phones
6.4 CALIBRATION PROCEDURES
Please carry outthe calibrating procedures betore the tirst night
1 )Hold the Throttle Stlck fully down, fllp the GPS switch qulckly until the transmltler displays “
Calib compass l“
2 ) Rotate the x4 horizontally until the LCD screen displays 'l Callb compass 2"
3 ) Rotate the x4 vertically until the " Calib compass 2" disappears
4 ) Calibration done
sot WM:
Holddmmmmlem WNMWMJILGD
Q We mwunmtr
,_
a: e
E / l /®\‘
‘“ / K;/
see
mmmmmhml
WulbmW-Z'dw
4. [
Calibrallonmme bi
xi
7. START] STOP THE MOTORS
Start the motors
Method Pull the two sticks as the plcture shows Release
them after the motors em
Stop the motors
Method : Pull the sticks agaln, as seen tn the plcture‘ and
release them after the motors stop.
Q Do not stop the motors durlrtg the night to avold ehy crash.
Push the sllcks es sltghtly as you can. Release the stlcks atter the motors start or slop.
8. BASIC FLIGHT
The operatlon mode forms llahsmlfler ls Mode 1 or Mode 2 The manual wlil use Made 2 as an
Exampie to lliuslrale the Iransmltlel’s operatlon
.The s|ick relum to the center The hammer: suck is ll" lhe cenler
.Slick‘s rudder offset: The aflsetofthe transmltter slicks (mm the center.
Transmitter (Model 2) x4 Control Ways
U P The throttle stlck controls the ascent aha
descent
Push up the Sth am the x4 wlli ascend.
Pull down the stlnk and the x4 wlll descend
When the 51le h center‘ the x4 le hovel and
hold lts alllllude automatreally
15
RTgh‘ retahah
Le“ ro‘atTon
The Rudder suck cemmls me lacmg dTTeehoh
Push The such Ian and The x4 wTT heme
eduhmeTechwse
Push The sfick rTgN ahd The x4 wiTT mvaxe
cTockwTsa
Wheh me suck Ts .h cemenhe x4 when
ahgTe Ts zem and doesn“ name
A harder pus ' eTTher dheehdh WTTI cause The
x4 (0 Totem Tamer Th «he cunespdhdmg
dTremeh
Forward
Backward
The ETevamr s1Tck moves the x4 lorwald and
backward
Push The s1Tck up The ehd We x4 wTH nyTeTward
PuIT The sunk down and ma x4 and badmard.
When The suck Ts Th oemen The swan wTTT her
Tls posiriun
The degree a: suck mavememcmresponds (a
The degree own and TIyThg speed
RTgM
The ATTemh suck mmst Ieh ehd ngmmgm
Push The s1Tck Ieh and the XA wTT ny Tefl
Push The 51Tck nghtand the XA wTT Try hghT
The x4 shequ be hethmal ahd uhmwmg at
cemev slick
The nigm speed and uh ahgTe aTe Imked In The
de‘anca Dressed eh me ahehs
pusTITun1 (upward)
pesmeh 2 (downward)
RTH smeh
VTdeo Bunoh
Tmpenam Note The GPS ahd Heme Tuhcn'ehs aTe ehTyTuroumaer
Please make sure the Wm swhch keep downward when Th deer
The GPS SWTTeh IS DusT‘Tonrhuld Tuhcueh
swhch
Th pdsTudh T Tup), me GPS cuhehdhs are acme
Th poem 2 (down) the GPs Tuhniehs aTe
deadwa‘sd.
The RTH Swneh Ts me RTH Tuneueh swmch
up 1PcsThoh 1T acuvams Ihe RTH Tuhchoh
Dawn (Posman 2) deem/mes me RTH
TuhmTah
Fer me pheue ahd me man flmCITOHS‘ please
aways poweromhe quaflmpler and Ihe
hahsmmerwheh ihsehihg or remuvmg the TF
ram
mmm‘ m‘rura
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connect-
ed.
- Consult the local dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void
the users authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Electrical and electronic equipment that are supplied with batteries
(including internal batteries)
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should
be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or
returned to the supplier for disposal.
Internal / Supplied Batteries.
This symbol on the battery indicates that the battery is to be collected separately.
This battery is designed for separate collection at an appropriate collection point.
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2015:11:04 18:11:35+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2015:12:24 11:47:23+08:00
Metadata Date                   : 2015:12:24 11:47:23+08:00
Producer                        : Adobe PDF library 10.01
Format                          : application/pdf
Title                           : 说明书-H501S标准英文说明书（1-15页）-PP1400185
Document ID                     : uuid:a1e6a027-1ffc-4995-a787-dc7f512b5c50
Instance ID                     : uuid:45b89b20-286e-45b0-9b0a-6d36fd37f1aa
Page Count                      : 16
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools