| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2648679 |
| Application ID | ZTUlBhXDNhrb+D836E00tQ== |
| Document Description | User manual part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 249.29kB (3116129 bits) |
| Date Submitted | 2015-06-16 00:00:00 |
| Date Available | 2015-06-16 00:00:00 |
| Creation Date | 2015-06-11 10:25:45 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-06-11 10:25:57 |
| Document Title | Users Manual |
| Document Author: | Administrator |
ÂŽ
Ages 14+
Read the instruction manual carefully
ITEM NO.:H109S
X4 PRO WITH FPV TRANSMITTER
THE HUBSAN X4 PRO
REAL TIME FPV
Hubsan X4 PRO
V1.0
2015.01
Read the instruction manual carefully!
IMPORTANT SAFETY NOTES
OPERATION:
Be extremely careful and responsible when use the X4 Pro. There are delicate electronic components,
which can be damaged if you crash the X4 Pro or submerge it in water. Do not attempt to fly a damaged X4
Pro. Always inspect propellers for damage and proper tightness. Do not fly with damaged propellers!
Flight:
Be responsible for your safety and the safety of others when you fly X4 Pro!
Do not fly the X4 Pro in a crowded place, it needs plenty of space to operate.
Do not fly it in bad weather.
Never try to catch the X4 Pro while it is in flight.
Only recommended for ages 14+.
Power off X4 Pro after flight, to prevent the propellers from causing injuries.
Always remove the battery after you stop flying to avoid injuries from accidentally powering on the motors.
Always use great caution to protect yourself when near the propellers. The flight system can automatically
operate after power on with the transmitter is power on/ off. The high speed rotating propellers are
very dangerous.
READING INSTRUCTION
SYMBOL EXPLANATION
No operating
Important Notice
Instruction
USAGE ADVICE
Hubsan provides you three files for X4 Pro:
1. Disclaimerâ
2. Hubsan X4 Pro Instruction Manualâ
View the instruction videos and Disclaimer first, then read the manuals.
02
Š2015 Hubsan
֝Ӱ೨á੿Çŕž ŕ°żŕŠŕ°Ś
Explanation, reference
CATALOG
02
02
16
4 PREPARATION FOR THE SMART TX
symbol explanation
usage advice
4.1 Introduction
17
4.2 The installation of TX Battery
18
4.3 Start the transmitter.
18
CATALOG
03
GENERAL INTRODUCTION
04
4.4 Method to bind the Transmitter
and x4 pro
19
1 ACCESSORIES INCLUDED
04
4.5 Introduction of the LCD
19
2 INTRODUCTION
05
4.6 Introduction of Antenna
19
PREPARATION FOR FLY
PREPAR FOR USE
1.COMPASS CALIBRATION
1 PREPARE THE LI-PO BATTERY
20
1.1 Li-Po battery in the X4 Pro
06
1.1 calibration
21
1.2 Charging
06
1.2 Check the GPS
21
1.3 Power on/ off the X4 Pro Li-Po battery
07
2 POWER ON/OFF THE X4 PRO
21
1.4 Check The Li-po Battery Power
07
3 BASIC FLIGHT
22
2 SAFETY NOTES
2.1 Important Notes
08
2.2 Li-Po battery Safety Notes
08
4 LOSE CONTROL PROTECTION FUNCTION
--RTH MODE
23
3 PREPARE THE X4 PRO
3.1 Introduction the X4 Pro
09
3.2 Prepare the Camera
09
3.3 Prepare the 3 Axis Stable Gimbal
12
3.4 Prepare the Parachute
13
3.5 Prepare the Propeller set
15
4.1 The condition which can enter into
the RTH Mode
24
4.2 Exit the RTH Mode
24
5 INTELLIGENT BATTERY ALARM FUNCTION
FAQ
24
25
03
Š2015 Hubsan
֝Ӱ೨á੿Çŕž ŕ°żŕŠŕ°Ś
CATALOG
IMPORTANT SAFETY NOTES
READING INSTRUCTION
ACCESSORIES INCLUDED
GENERAL INTRODUCTION
Hubsan X4 Pro is a high-tech aerial video and photography quadcopter. It is equipped with a highly accurate
and stable 3 axis gimbal, 1080P HD aerial photography camera, and advanced smart flight control system.
The highly-integrated Android transmitter is capable of long distance camera control, video transmission,
ground station auto flight, FPV flight, and social network sharing, etc. functions. The Hubsan X4 Pro will help
you to easily shoot stable HD videos and photos.
FPV: First Person View provides a realistic inflight cockpit view experience.
1. ACCESSORIES INCLUDED
Check all the accessories in the package before use.
S/N
Part Name
The X4 Pro
Photos
Q'ty
1PC
Remarks
Equipped with smart flight
controller,GPS and compass
Propellers
4PCS
Propeller A 2pcs, Propeller B 2pcs
1-axis stablized gimbal
1PC
1-axis stablized gimbal
Propeller removal wrench
1PC
For removing propellers
Transmitter
1PC
Smart Phone Clip
1PC
Hold the smart phone
Li-Po battery for X4 Pro
1PC
Insert in the X4 Pro
Li-Po Charger Adapter
1PC
110-240V
Li-Po Balance charger
1PC
use to recharge the Li-Po battery
10
Propeller guard
4PCS
Ensure the safety of the X4 Pro
FPV Transmitter, equipped
04
Š2015 Hubsan
֝Ӱ೨á੿Çŕž ŕ°żŕŠŕ°Ś
with 8 X AA battery(EXCLUDED)
ACCESSORIES INCLUDED
11
Micro-USB cable
1PC
To read the camera data
12
User Manuals
4PCS
Disclaimer
Hubsan X4 Pro Instruction Manual
Camera Instruction Manual
Parachute Instruction Manual
13
1080P camera
ďźPC
HD camera module
14
Transmitter Antenna
ďźPC
5.8 GHz Transmitter Antenna
15
Video glasses
ďźPC
Video glasses (Not included. Purchase
this optional accessory from Hubsan)
Stand-alone system, can help
16
Parachute
1PC
provide some safety after a loss of
control. (Not included. Purchase this
optional accessory from Hubsan)
2. INTRODUCTION
The Hubsan X4 Pro system consists of the quadcopter, camera, gimbal, parachute, propeller
guard, power system, flight control system, and radio transmission system.
Transmitter equipment: dual data transmission, map and track display, waypoints set/auto-flight,
FPV transmitter operates video and picture shooting
X4 Pro equipment: 3-axis gimbal, camera, power system(brushless motors and propellers),
parachute, propeller guard
X4 Pro working Mode: Altitude Hold Mode, Position-hold Mode, Waypoint Mode, RTH Mode,
Headless Mode
[Propeller]
[Brushless motor]
[LED light]
[1 axis gimbal]
[Battery compartment]
[1080P camera]
[Terrestrial magnetism]
[Undercarriage]
[Parachute]
[non-slip mat]
05
Š2015
Hubsan
֝Ӱ೨á੿Çŕž ŕ°żŕŠŕ°Ś
PREPAR FOR USE
FPV Transmitter, equipped
with 8 X AA battery(EXCLUDED)
PREPARATIONS FOR USE
Thanks for buying HUBSAN products!
1 PREPARE THE LI-PO BATTERY
Make sure the following equipment is fully-charged before flight.
EQUIPMENT
SUPPLIED POWER
Camera
3.7 V 650mAh rechargeable Li-Po battery
X4 Pro with gimbal
11.1V 7000mAh rechargeable Li-Po battery
Parachute
3.7 V 380mAh rechargeable Li-Po battery
1.1 LI-PO BATTERY IN THE X4 PRO
The X4 Pro is equipped with a 11.1V, 3 cells, 7000mAh rechargeable Li-Po battery. Always
charge the Li-Po battery with Hubsan provided charger.
BATTERY SPECIFICATIONS
Charging temperature: 0°C~40°C
Discharging temperature: - 20°C~50°C
Charging/ Discharging humidity:ďź 80%
1.2 CHARGING
Connect battery to balance charger and wall charger, the two LED lights will turn red when
charging and turn green when charging is finished. The charging time is about 180 min.
06
Š2015 Hubsan
֝Ӱ೨á੿Çŕž ŕ°żŕŠŕ°Ś
BATTERY
(1) Overcharge protection
Overcharging will damage the battery, charging will
stop when the battery charge to 12.8V.
(2) Over-discharge protection
Over-discharging will damage the battery. The X4 Pro
will cut off power when the battery power is 8.4V.
(3) Short circuit protection
Short circuit detection. The X4 Pro will power off to
protect the battery.
1.3 POWER ON/ OFF THE X4 PRO LI-PO BATTERY
Power on: Put the battery into the battery compartment, connect the battery plug with correct
polarity. When the X4 Pro is power on, the blue LEDs on X4 Pro will blink in a rotating pattern.
Power off: Disconnect the battery connector plug to remove power from the X4 Pro. The LEDs
will turn off.
1.4 CHECK THE LI-PO BATTERY POWER
After the X4 Pro and the Transmitter finish pairing, the battery power will display on the tablet.
BATTERY POWER
Always partially charge your lipo battery before storage.
LiPo batteries retain a charge over a long period at about a 50% or 3.85v per cel storage
charge. It is not normally necessary to recharge stored LiPo batteries unless stored for periods
longer than 3-6 months.
If your LiPo battery has been over-discharged, it will not be possible to recharge it again.
LiPo Battery Disposal & Recycling
Lithium-Polymer(LiPo) batteries must not be placed in with household trash. Please
contact your environmental or waste agency or the supplier of your model for local
regulations and the location of your nearest LiPo battery recycling center.
07
Š2015 Hubsan
֝Ӱ೨á੿Çŕž ŕ°żŕŠŕ°Ś
BATTERY
2 SAFETY NOTES
2.1 IMPORTANT NOTES
This X4 Pro is not a toy. Any improper use of this product will result in serious injury. Be aware
of your personal safety, the safety of others and your surrounding environment. We strongly
recommend that beginners learn to fly with proper instruction from more experienced pilots
before attempting to fly the X4 Pro for the first time. It is your responsibility to comply with
your country's remote controlled and Unmanned Aerial Vehicle flight regulations!
2.2 LI-PO BATTERY SAFETY NOTES
The X4 Pro is powered by a lithium-polymer(Li-Po) battery. To avoid risk of fire or damage,
never recharge your battery while it is inserted in the plane. If you do not plan to fly the plane for
a week or more, store the battery approximately 50% charged to maintain battery performance
and life.
LiPo batteries are different from conventional batteries in that their chemical contents
are encased in a relatively lightweight foil packaging. This has the advantage of
significantly reducing their weight, but does make them more susceptible to damage if
roughly or inappropriately handled. As with all batteries, there is a risk of fire or
explosion if safety practices are ignored:
Charge and store LiPo batteries in a location where a battery fire or explosion
(including smoke hazard) will not endanger life or property.
Keep LiPo batteries away from children and animals.
Never charge the LiPo battery that has ballooned or swelled .
Never charge the LiPo battery that has been punctured or damaged.
After a crash, inspect the battery pack for the sign of damage. Discard in
accordance with your country s recycling laws.
Never charge the LiPo battery in a moving vehicle.
Never overcharge the LiPo battery.
Never leave the LiPo battery unattended during recharging.
Do not charge LiPo batteries near flammable materials or liquids.
Ensure that charging leads are connected correctly. Reverse polarity charging can
lead to battery damage or a fire or explosion.
Have a suitable fire extinguisher (electrical type) OR a large bucket of dry sand near
the charging area . Do not try to extinguish electrical (LiPo) battery fires with water.
Reduce risks from fire/explosion by storing and charging LiPo batteries inside a
suitable container.
Protect your LiPo battery from accidental damage during storage and transportation.
(Do not put battery packs in pockets or bags where they can short circuit or can
come into contact with sharp or metallic objects.).
If your LiPo battery is subjected to a shock (such as a crash), place it in a metal
container and observe for signs of swelling or heating for at least 30 minutes.
Do not attempt to disassemble or modify or repair the LiPo battery.
08
Š2015 Hubsan
֝Ӱ೨á੿Çŕž ŕ°żŕŠŕ°Ś
PREPARE THE X4 PRO
3 PREPARE THE X4 PRO
3.1 INTRODUCTION THE X4 PRO
[1]
[1] Propeller
[2]
[3]
[2] Brushless motor
[4]
[3] LED light
[5]
[4] Shock resistance equipment
[6]
[7]
[5] 1-axis gimbal
[8]
[6] 1080P camera
[7] Undercarriage
[8] Terrestrial magnetism
[9]
[10]
[9] Battery compartment
[11]
[10] External interface
[11] Parachute
[12]
[12] non-slip mat
3.1.1 FLIGHT CONTROL SYSTEM INTRODUCTION
Hubsan X4 Pro is easy to operate and very stable, it supports moving forward/backward,
left/right, ascending and descending, basic flight performance, and also supports lost control
protection, power alarming and IOC functions.
Modules on flight control system
Main control Module
Function
CPU of the flight control system, connects to all the modules for
central control processes.
IMU Module
Includes inertial sensor, stabilizes flight; includes a barometer to
measure the flight altitude.
GPS & Compass Module
Position hold and Navigation.
LED indicating lights
Indicating the flight control system's condition.
3.2 PREPARE THE CAMERA
Insert battery into the camera and attach the camera onto the gimbal. Power on the
camera. You can press the buttons on the camera to record pictures and videos. You can
also use H7000 transmitter for recording and playing the videos.
09
Š2015 Hubsan
֝Ӱ೨á੿Çŕž ŕ°żŕŠŕ°Ś
CAMERA
Camera specifications
Recording resolution
1920*1080 Full HD
Battery
3.7VÇ650mAh
Recording frame rate
30FPS
Working temperature
10á¸+70Ä
Video format
MOV
Working humidity
30%á¸80%
Image Sensor
3 million pixel
Working power
1.9W
Image pixel
2048*1536 pixel
Standby power
1.33W
Lens format
1/3â
Storage temperature
- 40á¸+125Ä
Lens FOV
170 ᜎMAXᜯ
Storage humidity
30%-90%
MJPG
[ 108&3]
3.2.1 CAMERA BUTTONS INSTRUCTION
[3FDPSEJOH]
[$BNFSBDBQ]
Power on/off: Press the power button(<2sec), power on;
Hold down the power button(Â2sec ), power off.
Video shooting: Press the video button(<2sec), start recording;
Hold down the video button(Â2sec), recording stops. [*OEJDBUJOHMJHIU]
[.JDSPQIPOF]
3.2.2 MICRO-SD CARD
Insert the Micro-SD card into the camera before shooting as the
picture shows, always insert/remove the Micro-SD card after
power off.
The Micro-SD card is not included. You must source and format
a name brand Micro-SD card. The camera supports using a
4-32GB Class 4-6 Micro-SD card. You must format the
Micro-SD card before use.
Ć'RQRWLQVHUWUHPRYHWKH0LFUR6'FDUGZKHQWKHFDPHUDLV
powered on. Doing so can corrupt the SD card and files.
Ć)RUPDWWKH6'FDUGRQWKHFRPSXWHUILUVW
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Author : Administrator
Create Date : 2015:06:11 10:25:45+08:00
Modify Date : 2015:06:11 10:25:57+08:00
Has XFA : No
XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date : 2015:06:11 10:25:57+08:00
Format : application/pdf
Title : 鐠囧瓨妲戞稊?娴ｅ酣鍘ら悧鍦?09S閸忣剙寰冮弽鍥у櫙閼昏鲸鏋冮悧鍫礄1閿?5妞ょ绱
Creator : Administrator
Document ID : uuid:3c19bec8-412b-4424-9b58-56728b3aa9d8
Instance ID : uuid:2c4a7442-0480-4b2e-a3b0-dfb5d1f18063
Producer : Acrobat Distiller 9.0.0 (Windows)
Page Count : 16
EXIF Metadata provided by EXIF.tools