HUIZHOU GAOSHENGDA TECHNOLOGY BT02B150 Bluetooth Module User Manual 4 BT02B150 Usermanual

Download:
Mirror Download [FCC.gov]
Document ID	2363153
Application ID	oQV9Xjc9ExsSOvPTqkUPvQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.88kB (73528 bits)
Date Submitted	2014-08-19 00:00:00
Date Available	2014-08-19 00:00:00
Creation Date	2014-08-05 17:53:02
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-08-05 17:53:02
Document Title	Microsoft Word - 4.BT02B150 Usermanual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

PRODUCTS USERMANUAL
BT02B150
Bluetooth 4.0 Module
Model Number: BT02B150
Product Description
GSD BT02B150 is to specify the product requirements for Bluetooth 4.0 Module.
This Card is based on Broadcom BCM20705 chipset that can support
BT2.1+EDR/BT3.0+HS and BT4.0+EDR.
Product Features
◆ Bluetooth 4.0+EDR compliant
◆Programmable output power control meets Class1,Class2,or Class3
requirements.
◆Use supply voltages up to 5.5V.
◆Supports Broadcom SmartAudioTM,wide-band speech,SBC codec,and packet
lose concealments.
◆Ultra-low power consumption.
◆ARMTDMI-STM-based microprocessor with integrated ROM and RAM
◆Supports mobile and PC applications without external memory.
PAGE 1 OF
Version 1.0
PRODUCTS USERMANUAL
BT02B150
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interferencereceived, including interference that
may cause undesired operation.
Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void
FCC Important Notes:
(1)
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
The devices must be installed and used in strict accordance with the manufacturer’s
instructions as described in the user documentation that comes with the product.
Modular could be only used in mobile or fix device, and could not be used in any
portable device.
PAGE 2 OF
Version 1.0
PRODUCTS USERMANUAL
BT02B150
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user authority to operate the equipment.
(2)
Co-location Warning:
This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
(3)
OEM integration instructions:
This device is intended only for OEM integrators under the following conditions:
The thetransmitter module may not be co-located with any other transmitter or
antenna. The module shall be only used with the intergral antenna(s) that has been
originally tested and certified with this module.
As long as 3 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirementsrequired with this module installed (for example,
digital device emissions, PC peripheral requirements, etc.).
(4)
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization
for this module in combination with the host equipment is no longer considered valid
and the FCC ID of the module cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate FCC authorization.
(5)
End product labeling:
The final end product must be labeled in a visible area with the following:
“Contains Transmitter Module FCC ID: 2ACVA-BT02B150”.
(6)
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user's manual of the end
product which integrates this module. The end user manual shall include all
required regulatory information/warning as show in this manual.
PAGE 3 OF
Version 1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:08:05 17:53:02+08:00
Create Date                     : 2014:08:05 17:53:02+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 4.BT02B150 Usermanual.doc
Creator                         : Administrator
Document ID                     : uuid:2495d4f2-d2b6-458a-859f-97f397a7c8fd
Instance ID                     : uuid:b37de407-8e05-4170-9577-0343e3c42dd5
Page Count                      : 3
Author                          : Administrator

EXIF Metadata provided by EXIF.tools