HUIZHOU GAOSHENGDA TECHNOLOGY W2FM2510 WIFI module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4108045
Application ID	ym0TYjR88Gf9Mn8VyABYSA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.05kB (375566 bits)
Date Submitted	2018-12-17 00:00:00
Date Available	2018-12-17 00:00:00
Creation Date	2018-11-30 16:59:03
Producing Software	Microsoft® Word 2016
Document Lastmod	2018-12-13 11:48:06
Document Title	Users Manual
Document Creator	Microsoft® Word 2016
Document Author:	zy

Hui Zhou Gaoshengda Technology Co., LTD
W2FM2510
WIFI Module
IEEE 802.11 b/g/n 2T/2R
Model Number: W2FM2510
Product Description
The W2FM2510 is a 2.4GHz WIFI 2×2 MIMO module. The WLAN operation supports 20MHz,40MHz channels for
data rates up to 300Mbps. It fully complies with IEEE 802.11 b/g/n feature rich wireless connectivity at high
standards,delivers reliable,cost-effective, throughput from an extended distance.
Product Features
◆ Complies with IEEE 802.11b/g/n for 2.4GHz Wireless LAN.
◆Two transmit and Two receive path(2T2R)
◆ Works with all existing network nfrastructure.
◆Capable of up to 128-Bit WEP Encryption.
◆Freedom to roam while staying connected.
◆ UP to 300Mbps High-Speed Transfer Rate in 802.11n mode of operation.
◆ Operating Systems：Android,Linux,Win7,XP
◆ Low power consumption.
◆ Easy to install and configure.
◆ High speed USB 2.0 interface
◆ ROHS compliant
Product Specification
Product Name
WIFI Module
Model
W2FM2510
Standard
802.11 b/g/n
Interface
USB
Data Transfer Rate
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90 and maximum of 300Mbps
Modulation Method
DQPSK,DBPSK,CCK(802.11b)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)
Frequency Band
2412~2462 MHz
Operation Mode
Infrastructure
Security
WEP, TKIP, AES, WPA, WPA2
Operating Voltage
5V±10%
Current Consumption
＜1000mA
Antenna Type
PIFA
Operating
Temperature
0 ~ 60°C ambient temperature
Storage Temperature
-40 ~ 80°C ambient temperature
Humidity
5 to 95 % maximum (non-condensing)
PAGE
OF
Version 1.0
Hui Zhou Gaoshengda Technology Co., LTD
W2FM2510
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
If power exceeds the limit and the distance（Over 20cm distance in actual use between the device and user） is
compliant with the requirement
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part
of your body.
Notice to OEM integrator
The end user manual shall include all required regulatory information/warning/statement as show in this manual.
The OEM integrator is responsible for testing their end-product for any additional compliance
requirements required with this module installed.
If the FCC ID is not visible when the module is installed inside another device, then the outside of the
device into which the module is installed must also display a label referring to the enclosed module.
The end product shall haves the words “Contains Transmitter Module FCC ID: 2AC23-W2FM2510”.
PAGE
OF
Version 1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Producer                        : Microsoft® Word 2016
Format                          : application/pdf
Title                           : 产品规格书
Creator                         : zy
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2018:11:30 16:59:03+08:00
Modify Date                     : 2018:12:13 11:48:06+08:00
Metadata Date                   : 2018:12:13 11:48:06+08:00
Document ID                     : uuid:98FC05B8-0077-45F3-896A-517124ED5EFD
Instance ID                     : uuid:c514d706-cc03-4822-9daf-c7d09cbe72e9
Author                          : zy

EXIF Metadata provided by EXIF.tools