HUIZHOU GAOSHENGDA TECHNOLOGY WC0FR2601 WIFI Module User Manual WC0FR2601 SPC V1 4 161010

Hui Zhou Gaoshengda Technology Co.,LTD WIFI Module WC0FR2601 SPC V1 4 161010

Contents

User Manual 1

PRODUCT SPECIFICATION Version 1.4 IEEE 802.11 a/b/g/n/ac 2T/2R Dual Band USB Module Model Number: WC0F2601 2.4G channel： 1-11 5G channel： 36-48 149-165 客户认可 Custom Approval Section Custom Name Department Approval Date： 拟制 DESIGN 审核 CHECK 批准 APPROVAL 唐红君 陈宇科 熊运自 20161010 20161010 20161010
PRODUCTS SPECIFICATION PAGE 2 OF 09WC0FR2601 Version 1.4 Document revision history Revision Date Approved by Remarks Version 1.0 2016-07-11 Draft Version 1.1 2016-07-12 Change 8 PIN to 10 PIN Version 1.2 2016-08-06 Change Mechanical Dimensions 25*45mm to 47*30mm Version 1.3 2016-09-18 1、Change function block diagram 2、Change the 5G receive Sensitivity. 3、Change Mechanical Dimensions 4、Change SMT connector spec 5、Change antenna spec Version 1.4 2016-10-10 1、 Change antenna spec 2、 Update BOM
PRODUCTS SPECIFICATION PAGE 3 OF 09WC0FR2601 Version 1.4 1. General Description This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is based on Realtek RTL8812AU chipset that complied with IEEE 802.11b/g/n/ac Draft 3.0 compatible WLAN ,and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4000~2.4835GHz. It can be used to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g,11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n and 866.7Mbps for IEEE 802.11ac to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11 a/b/g/n/ac USB Module offers absolute interoperability with different vendors 802.11a/b/g/n/ac.Access Points through the wireless LAN. 2. Features  Compatible with IEEE 802.11a standard to provide wireless 54Mbps data rate.  Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate.  Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate.  Compatible with IEEE 802.11n standard to provide wireless 300Mbps data rate.  Compatible with IEEE 802.11ac standard to provide wireless 866.7Mbps data rate.  Operation at 2.4~2.5GHz and 5.15~5.825GHz frequency band to meet worldwide regulations  Provides simple legacy and 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility.  Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication  Supports IEEE 802.11i (WPA and WPA2), WAPI,. enhanced security  Friendly user configuration and diagnostic utilities  Drivers support Windows XP,Vista.Win7  High speed USB 2.0 interface  ROHS compliant
PRODUCTS SPECIFICATION PAGE 4 OF 09WC0FR2601 Version 1.4 3. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 IEEE 802.11b Section Feature Detailed Description 3.2.1.1 Standard ● IEEE 802.11b 3.2.1.2 Radio and Modulation Schemes ● DQPSK , DBPSK , DSSS , and CCK 3.2.1.3 Operating Frequency ● 2400 ～ 2483.5MHz ISM band 3.2.1.4 Channel Numbers ● 11 channels for United States ● 13 channels for Europe Countries ● 14 channels for Japan 3.2.1.5 Data Rate ● 11,5.5,2,and 1Mbps 3.2.1.6 Media Access Protocol ● CSMA/CA with ACK 3.2.1.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain,Data Rate and at room Temp. 25℃ ● +19 dBm at 1Mbps ● +18 dBm at 2Mbps ● +17 dBm at 5.5Mbps ● +16 dBm at 11Mbps
PRODUCTS SPECIFICATION PAGE 5 OF 09WC0FR2601 Version 1.4 3.2.1.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8% ● -88 dBm at 1Mbps ● -82 dBm for 11Mbps 3.2.2 IEEE 802.11g Section Feature Detailed Description 3.2.2.1 Standard ● IEEE 802.11g 3.2.2.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM with OFDM 3.2.2.3 Operating Frequency ● 2400 ～ 2483.5MHz ISM band 3.2.2.4 Channel Numbers ● 11 channels for United States ● 13 channels for Europe Countries ● 13 channels for Japan 3.2.2.5 Data Rate ● 6,9,12,18,24,36,48,54Mbps 3.2.2.6 Media Access Protocol ● CSMA/CA with ACK 3.2.2.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ ● +18dBm at 6Mbps ● +14dBm at 54Mbps 3.2.2.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25℃ ● -86 dBm at 6Mbps ● -73 dBm at 54Mbps 3.2.3 IEEE 802.11a Section Feature Detailed Description 3.2.3.1 Standard ● IEEE 802.11a 3.2.3.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM with OFDM 3.2.3.3 Operating Frequency ● 5.15~5.35GHz and 5.725~5.825GHz for US and Canada ● 5.15~5.35GHz and 5.47~5.725GHz for Japan ● 5.15~5.35GHz and 5.47~5.725GHz for Europe ● 5.725~5.825GHz for China 3.2.3.4 Channel Numbers ● 12 non-overlapping channels for US and Canada ● 8 non-overlapping channels for Japan ● 19 non-overlapping channels for Europe ● 4 non-overlapping channels for China 3.2.3.5 Data Rate ● 6,9,12,18,24,36,48,54Mbps 3.2.3.6 Media Access Protocol ● CSMA/CA with ACK 3.2.3.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ ● +18 dBm at 6Mbps ● +14 dBm at 54Mbps 3.2.3.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25℃ ● -83 dBm at 6Mbps ● -71 dBm at 54Mbps
PRODUCTS SPECIFICATION PAGE 6 OF 09WC0FR2601 Version 1.4 3.2.4 IEEE 802.11n Section Feature Detailed Description 3.2.4.1 Standard ● IEEE 802.11n 3.2.4.2 Radio and Modulation Type ● BPSK , QPSK , 16QAM ,64QAM with OFDM 3.2.4.3 Operating Frequency ● 2.4GHz band:2400 ~ 2483.5MHz ● 5GHz and:5150 ~ 5825MHZ 3.2.4.4 Data Rate MCS GI=800ns GI=400ns 20MHz 40MH 20MHz 40MHz 0 6.5 13.5 7.2 15 1 13 27 14.4 30 2 19.5 40.5 21.7 45 3 26 54 28.9 60 4 39 81 43.3 90 5 52 108 57.8 120 6 58.5 121.5 65.0 135 7 65 135 72.2 150 8 13 27 14.4 30 9 26 54 28.9 60 10 39 81 43.3 90 11 52 108 57.8 120 12 78 162 86.7 180 13 104 216 115.6 240 14 117 243 130 170 15 130 270 144.4 300 3.2.4.5 Media Access Protocol ● CSMA/CA with ACK 3.2.4.6 Transmitter Output Power at Antenna Connector ● Typical RF Output Power (tolerance±2dB) at each RF chain,Data Rate and at roomTemp. 25℃ ● 2.4GHz Band/HT20 ● 18 dBm at MCS0 ● 12 dBm at MCS7 ● 2.4GHz Band/HT40 ● 18 dBm at MCS0 ● 12 dBm at MCS7 ● 5GHz Band/HT20 ● 18 dBm at MCS0 ● 12 dBm at MCS7 ● 5GHz Band/HT40 ● 18 dBm at MCS0 ● 12 dBm at MCS7 3.2.4.7 Receiver Sensitivity at Antenna Connector Typical Sensitivity at each RF chain at Which Frame (1000-byte PDUs) Error Rate=10% and at room Temp. 25℃ 2.4GHz Band/HT20 ● -86 dBm at MCS0 ● -70 dBm at MCS7 2.4GHz Band/HT40 ● -83 dBm at MCS0 ● -66 dBm at MCS7
PRODUCTS SPECIFICATION PAGE 7 OF 09WC0FR2601 Version 1.4 5GHz Band/HT20 ● -83 dBm at MCS0/8 ● -68 dBm at MCS7/15 5GHz Band/HT40 ● -81 dBm at MCS0/8 ● -64 dBm at MCS7/15 3.2.5 IEEE 802.11ac Section Feature Detailed Description 3.2.5.1 Standard ● IEEE 802.11ac 3.2.5.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM,256QAM with OFDM 3.2.5.3 Operating Frequency ● 5.15~5.35GHz and 5.725~5.825GHz for US and Canada ● 5.15~5.35GHz and 5.47~5.725GHz for Japan ● 5.15~5.35GHz and 5.47~5.725GHz for Europe ● 5.725~5.825GHz for China 3.2.5.4 Channel Numbers ● 12 non-overlapping channels for US and Canada ● 8 non-overlapping channels for Japan ● 19 non-overlapping channels for Europe ● 4 non-overlapping channels for China 3.2.5.5 Data Rate ● at most 866.7 Mbps 3.2.5.6 Media Access Protocol ● CSMA/CA with ACK 3.2.5.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ ● HT20 ● 18 dBm at MCS0 ● 12 dBm at MCS7 ● 11 dBm at MCS8 ● HT40 ● 18 dBm at MCS0 ● 12 dBm at MCS8 ● 11 dBm at MCS9 ● HT80 ● 18 dBm at MCS0 ● 12 dBm at MCS8 ● 11 dBm at MCS9 3.2.5.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25℃ 5GHz Band / HT20 ● -63 dBm at MCS8 5GHz Band / HT40 ● -57 dBm at MCS9 5GHz Band / HT80 ● -56 dBm at MCS9
PRODUCTS SPECIFICATION PAGE 8 OF 09WC0FR2601 Version 1.4 4. Electrical and Thermal Characteristics 4.1 Temperature Limit Ratings Parameter Minimum Maximum Units Storage Temperature -40 +80 ℃ Ambient Operating Temperature 0 60 ℃ Junction Temperature 0 125 ℃ 4.2 General Section Feature Detailed Description 4.2.1 Antenna Type ● ANT1: IPEX connector ANT2: Metal antenna 4.2.2 Operating Voltage ● 3.3V±10% 4.2.3 Current Consumption ● ＜1100mA 4.2.4 Form Factor and Interface ● High Speed USB2.0 Interface 4.3 Software Driver Windows XP/ WinCE/ Vista,/ Win7, Linux, MAC Security 64/128-bits WEP, WPA, WPA2 4.4 Mechanical Requirements Feature Detailed Description 4.4.1 Length 长度 ● 47mm 4.4.2 Width 宽度 ● 30mm 4.4.3 High 高度 ● 6.2mm(PCB:1mm)
PRODUCTS SPECIFICATION PAGE 9 OF 09WC0FR2601 Version 1.4 5. Connector Definition 10-Pin 1.25 mm connector（Horizontal Type） 6 Mechanical Dimensions *TOLERANCES ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED *UNIT:mm Pin 1 2 3 4 5 6 7 8 9 10 Definition VCC (3.3V) VCC (3.3V) D- D+ GND WL_Host_Wake (Internal pull-up 10K Ohm) Reset (Internal pull-up 100K Ohm) GND NC GND
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth foruncontrolled enviroment. This equipment should be installed and operated withminimum distance 20cm between the radiator and your body. .

Navigation menu