HUIZHOU GAOSHENGDA TECHNOLOGY WC0FR2601 WIFI Module User Manual WC0FR2601 SPC V1 4 161010

Hui Zhou Gaoshengda Technology Co.,LTD WIFI Module WC0FR2601 SPC V1 4 161010

Contents

User Manual 1

PRODUCT SPECIFICATION Version 1.4
IEEE
802.11 a/b/g/n/ac
2T/2R Dual Band
USB Module
Model Number:
WC0F2601
2.4G channel： 1-11
5G channel： 36-48 149-165
客户认可
Custom Approval Section
Custom Name
Department
Approval Date：
拟制
DESIGN
审核
CHECK
批准
APPROVAL
唐红君 陈宇科 熊运自
20161010 20161010
20161010
PRODUCTS SPECIFICATION
PAGE 2 OF 09
WC0FR2601
Version 1.4
Document revision history
Revision Date Approved by Remarks
Version 1.0 2016-07-11 Draft
Version 1.1 2016-07-12 Change 8 PIN to 10 PIN
Version 1.2 2016-08-06 Change Mechanical Dimensions
25*45mm to 47*30mm
Version 1.3 2016-09-18
1、Change function block diagram
2、Change the 5G receive
Sensitivity.
3、Change Mechanical Dimensions
4、Change SMT connector spec
5、Change antenna spec
Version 1.4 2016-10-10 1、 Change antenna spec
2、 Update BOM
PRODUCTS SPECIFICATION
PAGE 3 OF 09
WC0FR2601
Version 1.4
1. General Description
This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is
based on Realtek RTL8812AU chipset that complied with IEEE 802.11b/g/n/ac Draft 3.0 compatible
WLAN ,and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and
IEEE 802.11b/g standard from 2.4000~2.4835GHz. It can be used to provide up to 54Mbps for IEEE
802.11a and IEEE 802.11g,11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n and 866.7Mbps for
IEEE 802.11ac to connect your wireless LAN.
With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11
a/b/g/n/ac USB Module offers absolute interoperability with different vendors 802.11a/b/g/n/ac.Access
Points through the wireless LAN.
2. Features
Compatible with IEEE 802.11a standard to provide wireless 54Mbps data rate.
Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate.
Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate.
Compatible with IEEE 802.11n standard to provide wireless 300Mbps data rate.
Compatible with IEEE 802.11ac standard to provide wireless 866.7Mbps data rate.
Operation at 2.4~2.5GHz and 5.15~5.825GHz frequency band to meet worldwide regulations
Provides simple legacy and 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward
and network compatibility.
Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer
communication
Supports IEEE 802.11i (WPA and WPA2), WAPI,. enhanced security
Friendly user configuration and diagnostic utilities
Drivers support Windows XP,Vista.Win7
High speed USB 2.0 interface
ROHS compliant
PRODUCTS SPECIFICATION
PAGE 4 OF 09
WC0FR2601
Version 1.4
3. Application Diagrams
3.1
Functional Block Diagram
3.2 General Requirements
3.2.1 IEEE 802.11b Section
Feature
Detailed Description
3.2.1.1
● IEEE 802.11b
3.2.1.2
Radio and
Modulation
Schemes
● DQPSK , DBPSK , DSSS , and CCK
3.2.1.3 Operating
Frequency
● 2400 ～ 2483.5MHz ISM band
3.2.1.4 Channel Numbers
● 11 channels for United States
● 13 channels for Europe Countries
● 14 cha
nnels for Japan
3.2.1.5
Data Rate
● 11,5.5,2,and 1Mbps
3.2.1.6 Media Access
Protocol
● CSMA/CA with ACK
3.2.1.7
Transmitter Output
Power at Antenna
Connector
● Typical RF Output Power(tolerance±2dB) at each RF chain,Data
Rate and
at room Temp. 25℃
● +19 dBm at 1Mbps
● +18 dBm at 2Mbps
● +17 dBm at 5.5Mbps
●
+
1
6
dBm
at
11Mbps
PRODUCTS SPECIFICATION
PAGE 5 OF 09
WC0FR2601
Version 1.4
3.2.1.8
Receiver
Sensitivity
at Antenna
Connector
● Typical Sensitivity at Which Frame(1000
-
byte PDUs)Error
Rate=8%
● -88 dBm at 1Mbps
● -82 dBm for 11Mbps
3.2.2 IEEE 802.11g Section
Feature
Detailed Description
3.2.2.1
● IEEE 802.11g
3.2.2.2 Radio and
Modulation Type
● QPSK , BPSK , 16QAM ,64QAM with OFDM
3.2.2.3 Operating
Frequency
● 2400 ～ 2483.5MHz ISM band
3.2.2.4 Channel Numbers
● 11 channels for United States
● 13 channels for Europe Countries
● 13 channels for Japan
3.2.2.5
Data Rate
● 6,9,12,18,24,36,48,54Mbps
3.2.2.6 Media Access
Protocol
● CSMA/CA with ACK
3.2.2.7
Transmitter Output
Power at Antenna
Connector
● Typical RF Output Power(tolerance±2dB) at each RF chain,
Data Rate and at roomTemp. 25℃
● +18dBm at 6Mbps
●
+
14
dBm
at
54Mbps
3.2.2.8
Receiver
Sensitivity
at Antenna
Connector
●
Typical Sensitivity at each RF chain. Frame(1000
-
byte
PDUs)Error Rate<10% at room Temp 25℃
● -86 dBm at 6Mbps
●
-
73
dBm at 54Mbps
3.2.3 IEEE 802.11a Section
Feature
Detailed Description
3.2.3.1
Standard
● IEEE 802.11
a
3.2.3.2 Radio and
Modulation Type
● QPSK , BPSK , 16QAM ,64QAM with OFDM
3.2.3.3 Operating
Frequency
● 5.15~5.35GHz and 5.725~5.825GHz for US and Canada
● 5.15~5.35GHz and 5.47~5.725GHz for Japan
● 5.15~5.35GHz and 5.47~5.725GHz for Europe
●
5.725~5.825GHz for China
3.2.3.4 Channel Numbers
● 12 non-overlapping channels for US and Canada
● 8 non-overlapping channels for Japan
● 19 non-overlapping channels for Europe
●
4 non
-
overlapping channels for China
3.2.3.5
Data Rate
● 6,9,12,18,24,36,48,54Mbps
3.2.3.6 Media Access
Protocol
● CSMA/CA with ACK
3.2.3.7
Transmitter
Output
Power at Antenna
Connector
● Typical RF Output Power(tolerance±2dB) at each RF chain,
Data Rate and at roomTemp. 25℃
● +18 dBm at 6Mbps
●
+1
4
dBm at
3.2.3.8
Receiver
Sensitivity
at Antenna
Connector
● Typical Sensitivity at each RF chain. Frame(1000-byte
PDUs)Error Rate<10% at room Temp 25℃
● -83 dBm at 6Mbps
● -71 dBm at 54Mbps
PRODUCTS SPECIFICATION
PAGE 6 OF 09
WC0FR2601
Version 1.4
3.2.4 IEEE 802.11n Section
Feature
Detailed Description
3.2.4.1 Standard ● IEEE 802.11n
3.2.4.2 Radio and
Modulation Type
● BPSK , QPSK , 16QAM ,64QAM with OFDM
3.2.4.3 Operating
Frequency
● 2.4GHz band:2400 ~ 2483.5MHz
● 5GHz and:5150 ~ 5825MHZ
3.2.4.4 Data Rate
MCS
GI=800ns
GI=4
00ns
20MHz
40MH
20MHz
40MHz
0
6.5
13.5
7.2
15
1
13
27
14.4
30
2
19.5
40.5
21.7
45
3
26
54
28.9
60
4
39
81
43.3
90
5
52
108
57.8
120
6
58.5
121.5
65.0
135
7
65
135
72.2
150
8
13
27
14.4
30
9
26
54
28.9
60
10
39
81
43.3
90
11
52
108
57.8
120
12
78
162
86.7
180
13
104
216
115.6
240
14
117
243
130
170
15
130
270
144.4
300
3.2.4.5 Media Access
Protocol ● CSMA/CA with ACK
3.2.4.6
Transmitter Output
Power at Antenna
Connector
● Typical RF Output Power (tolerance±2dB) at each RF chain,Data Rate
and at roomTemp. 25℃
● 2.4GHz Band/HT20
● 18 dBm at MCS0
●
12 dBm at MCS7
● 2.4GHz Band/HT40
● 18 dBm at MCS0
●
12 dBm at MCS7
● 5GHz Band/HT20
● 18 dBm at MCS0
●
12 dBm at MCS7
● 5GHz Band/HT40
● 18 dBm at MCS0
●
12 dBm at MCS7
3.2.4.7
Receiver Sensitivity
at Antenna
Connector
Typical Sensitivity at each RF chain at Which Frame (1000-byte PDUs) Error
Rate=10% and at room Temp. 25℃
2.4GHz Band/HT20
● -86 dBm at MCS0
● -70 dBm at MCS7
2.4GHz Band/HT40
● -83 dBm at MCS0
● -66 dBm at MCS7
PRODUCTS SPECIFICATION
PAGE 7 OF 09
WC0FR2601
Version 1.4
5GHz Band/HT20
● -83 dBm at MCS0/8
● -68 dBm at MCS7/15
5GHz Band/HT40
● -81 dBm at MCS0/8
● -64 dBm at MCS7/15
3.2.5 IEEE 802.11ac Section
Feature
Detailed Description
3.2.5.1
Standard
● IEEE 802.11
ac
3.2.5.2 Radio and
Modulation Type
● QPSK , BPSK , 16QAM ,64QAM,256QAM with OFDM
3.2.5.3 Operating
Frequency
● 5.15~5.35GHz and 5.725~5.825GHz for US and Canada
● 5.15~5.35GHz and 5.47~5.725GHz for Japan
● 5.15~5.35GHz and 5.47~5.725GHz for Europe
●
5.725~5.825GHz for China
3.2.5.4 Channel Numbers
● 12 non-overlapping channels for US and Canada
● 8 non-overlapping channels for Japan
● 19 non-overlapping channels for Europe
●
4 non
-
overlapping channels for China
3.2.5.5
Data Rate
●
at most
866.7
Mbps
3.2.5.6 Media Access
Protocol
● CSMA/CA with ACK
3.2.5.7
Transmitter
Output
Power at Antenna
Connector
● Typical RF Output Power(tolerance±2dB) at each RF chain,
Data Rate and at roomTemp. 25℃
● HT20
● 18 dBm at MCS0
● 12 dBm at MCS7
● 11 dBm at MCS8
● HT40
● 18 dBm at MCS0
● 12 dBm at MCS8
● 11 dBm at MCS9
● HT80
● 18 dBm at MCS0
● 12 dBm at MCS8
● 11 dBm at MCS9
3.2.5.8
Receiver
Sensitivity
at Antenna
Connector
● Typical Sensitivity at each RF chain. Frame(1000-byte
PDUs)Error Rate<10% at room Temp 25℃
5GHz Band / HT20
● -63 dBm at MCS8
5GHz Band / HT40
● -57 dBm at MCS9
5GHz Band / HT80
● -56 dBm at MCS9
PRODUCTS SPECIFICATION
PAGE 8 OF 09
WC0FR2601
Version 1.4
4. Electrical and Thermal Characteristics
4.1
Temperature
Limit
Ratings
Para
m
eter
M
i
n
i
m
u
m
Ma
x
i
m
u
m
Un
its
Storage
Temperature
-40
+80
℃
Ambient
Operating
Temperature
0
60
℃
Junction
Temperature
0
125
℃
4.2
General Section
Feature
Detailed Description
4.2.1 Antenna Type ● ANT1: IPEX connector
ANT2: Metal antenna
4.2.2
Operating Voltage ● 3.3V±10%
4.2.3
Current Consumption ● ＜1100mA
4.2.4
Form Factor and Interface
● High Speed USB2.0 Interface
4.3 Software
Driver Windows XP/ WinCE/ Vista,/ Win7, Linux, MAC
Security 64/128-bits WEP, WPA, WPA2
4.4 Mechanical Requirements
Feature Detailed Description
4.4.1 Length 长度
● 47mm
4.4.2 Width 宽度 ● 30mm
4.4.3 High 高度 ● 6.2mm(PCB:1mm)
PRODUCTS SPECIFICATION
PAGE 9 OF 09
WC0FR2601
Version 1.4
5. Connector Definition
10-Pin 1.25 mm connector（Horizontal Type）
6 Mechanical Dimensions
*TOLERANCES ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED
*UNIT:mm
Pin 1 2 3 4 5 6 7 8 9 10
Definition
VCC
(3.3V)
VCC
(3.3V)
D- D+
GND
WL_Host_Wake
(Internal pull-up
10K Ohm)
Reset
(Internal pull-up
100K Ohm)
GND
NC GND
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
.

Navigation menu