HUIZHOU GAOSHENGDA TECHNOLOGY WCT1B Module User Manual

Hui Zhou Gaoshengda Technology Co.,LTD Module Users Manual

user manual

Download: HUIZHOU GAOSHENGDA TECHNOLOGY WCT1B Module User Manual
Mirror Download [FCC.gov]HUIZHOU GAOSHENGDA TECHNOLOGY WCT1B Module User Manual
Document ID4121899
Application IDoy7YJNkvD8uBUwHIdcbSBg==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize13.56kB (169542 bits)
Date Submitted2018-12-28 00:00:00
Date Available2018-12-28 00:00:00
Creation Date2018-12-28 16:10:41
Document Lastmod2018-12-28 16:10:41
Document TitleUsers Manual
Document CreatorWPS Office 专业版
Document Author: zy

Hui Zhou Gaoshengda Technology Co., LTD
WCT1BR2201D/WCT1BR2701T
WIFI+BT Module
IEEE 802.11 a/b/g/n/ac 2T/2R
Model Number: WCT1BR2201D/WCT1BR2701T
Product Descrition
The WCT1BR2201D/WCT1BR2701T is a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 MIMO module. This module
provides a high level of integration with a dual-stream IEEE 802.11ac MAC/ base band /radio and Bluetooth
4.2+HS.The WLAN operation supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It fully
complies with IEEE 802.11 a/b/g/n/ac feature rich wireless connectivity at high standards,delivers
reliable,cost-effective, throughput from an extended distance.
Product Features
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n/ac 5GHz Wireless LAN.
Bluetooth v4.2+HS
Two transmit and Two receive path(2T2R)
Works with all existing network nfrastructure.
Capable of up to 128-Bit WEP Encryption.
Freedom to roam while staying connected.
UP to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation.
Operating Systems:Linux,Win7, Win8, Win10,XP
Low power consumption.
Easy to install and configure.
High speed USB 2.0 interface
Product Specification
Model
WIF+BT Module
Product Name
WCT1BR2201D/WCT1BR2701T
Standard
802.11 a /b/g/n/ac
Interface
USB
Data
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 866.7Mbps
Transfer Rate
Modulation Method
Frequency Band
GFSK,π/4-DQPSK,8DPSK(bluetooth)
DQPSK,DBPSK,CCK(802.11b)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11a)
QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac)
BLUETOOTH
2402~2480 MHz
Operation Mode
WIFI
2.4G: 2412~2462 MHz
5G: 5150~5250MHz,5725~5850MHz
Infrastructure
Security
WEP, TKIP, AES, WPA, WPA2
Operating Voltage
3.3V±10%
Current Consumption
<1000mA
Antenna Type
PIFA
Operating Temperature
0 ~ 60°C ambient temperature
Storage Temperature
-40 ~ 80°C ambient temperature
Humidity
5 to 95 % maximum (non-condensing)
PAGE
1 OF
Version 1.0
Hui Zhou Gaoshengda Technology Co., LTD
WCT1BR2201D/WCT1BR2701T
NOTICE:
◆please keep this product and accessories attached to the places which children can't touch;
◆do not splash water or other liquid onto this product, otherwise it may cause damage;
◆do not put this product near the heat source or direct sunlight, otherwise it may cause
deformation
◆or malfunction;
◆please keep this product away from flammable or naked flame;
◆please do not repair this product by yourself. Only qualified personnel can be repaired.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Please notice that if the FCC identification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains FCC ID:2AC23-WCT1B” any similar wording
that expresses the same meaning may be used.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
PAGE
2 OF
Version 1.0
Hui Zhou Gaoshengda Technology Co., LTD
WCT1BR2201D/WCT1BR2701T
The module is limited to OEM installation ONLY.
The OEM integrator is responsible for ensuring that the end-user has no manual instruction
to remove or install module.
The module is limited to installation in mobile application.
A separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and difference antenna configurations.
There is requirement that the grantee provide guidance to the host manufacturer for
compliance with Part 15B requirements.
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
Please notice that if the ISED certification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains IC:12290A-CT1B” any similar wording that
expresses the same meaning may be used.
l'appareil hôte doit porter une étiquette donnant le numéro de certification du module
d'Industrie Canada, précédé des mots « Contient un module d'émission », du mot «
IC:12290A-CT1B » ou d'une formulation similaire exprimant le même sens, comme suit
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
limits as appropriate;
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux;
pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour
les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite
de la p.i.r.e. spécifiée, selon le cas;
PAGE
3 OF
Version 1.0

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 3
Create Date                     : 2018:12:28 16:10:41+00:00
Modify Date                     : 2018:12:28 16:10:41+00:00
Title                           : 产品规格书
Author                          : zy
Creator                         : WPS Office 专业版
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AC23-WCT1B

Navigation menu