HUNG WAI 1859ATMB Android player Main board with wireless module User Manual 20150721

Download:
Mirror Download [FCC.gov]
Document ID	2696347
Application ID	0E80SQsum78ZjTOdWKR6Wg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.1kB (63732 bits)
Date Submitted	2015-07-29 00:00:00
Date Available	2015-07-30 00:00:00
Creation Date	2015-07-29 22:38:49
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-07-29 22:38:49
Document Title	User Manual-20150721.pdf
Document Creator	Microsoft® Office Word 2007
Document Author:	Windows 用户

User Manual
For
Android player Main board
with
wireless module
This user manual pertains to Android player Main board with Wireless module. The Main board can be assembled in the
Android based Advertising Media Player and Android based Advertising Set-Top-Box listes as below;
0RGHO
0RGHO'HVFULSWLRQ
'7$6
$QGURLGQRQWRXFK/&'0HGLD3OD\HU
'7$&
$QGURLGWRXFK/&'0HGLD3OD\HU
'7$6
$QGURLGQRQWRXFK/&'0HGLD3OD\HU
'7$&
$QGURLGWRXFK/&'0HGLD3OD\HU
'7$6
$QGURLGQRQWRXFK/&'0HGLD3OD\HU
'7$&
$QGURLGWRXFK/&'0HGLD3OD\HU
'7$6
$QGURLGQRQWRXFK/&'0HGLD3OD\HU
'7$& $QGURLGWRXFK/&'0HGLD3OD\HU
'7$6
$QGURLGQRQWRXFK/&'0HGLD3OD\HU
'7$&
$QGURLGWRXFK/&'0HGLD3OD\HU
'7$6
$QGURLGQRQWRXFK/&'0HGLD3OD\HU
'7$& $QGURLGWRXFK/&'0HGLD3OD\HU
,Q9LVLRQ$
,QYLVLRQ$QGURLG$GYHUWLVLQJ6HW7RS%R[
1. Specifications:
PCBA dimension: 87.5 X 143mm
Assemble method: the module will be screwed on the housing and used as a Main board for Android based
Advertising Media Player and Android based Advertising Set-Top-Box
Input port:
1pc 5.5mm female barrel jack - for +12V power input
1pc DTCN-A-15F – 15-pin female connector for additional control PCBA connection
1pc SD Card Slot - for SD
1pcs I2C interface for resistive/ capacitive touch screen
Output port:
1group of connector for LCD Screen of the Media Player, 1200 x 800 resolution or greater
2pcs Antenna connector for 2.4G + 5G WiFi network seperately
1pc 3.5mm headphone jack - for 85mW audio
2pcs DTCN-A-2F - 2-pin female connector for SP1-SP2
Other ports:
1pc DTCN-A-4F - 4-pin female connector for UART connection
1pc RJ45 jack - for hardwired network compatibility
1pc mini USB receptacle
2pcs USB-A standard USB receptacle
Antennas:
External
omni direction
antenna
polarity
，non standard
port）
with
2.5dBi gain.
Removable
antennas
with reversed
2.5dBi gain.
Provided
by Lianantenna
Chuang
Xin
(Shenzhen)
Ltd,Provided
Co. P/N:
by
Lian Chuang Xin (Shenzhen) Ltd, Co. P/N:ANT-1569SMA20-00-A
ANT-1569SMA20-00-A
Operation
+50ć
Operation temperature:-20ćto
temperature:-10ć
ć-60ć
Voltage(AC /60Hz):102-138V/ AC
Frequency Stability: +/-3.2 ppm
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in
any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with
FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed
and operated with a minimum distance of 20 cm between the radiator and user body.
The device is indoor use only.
If the FCC identification number is not visible when the module is installed inside another device, then the
outside of the device into which the module is installed must also display a label referring to the enclosed
module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID:
2AB6Z-1859ATMB Or Contains FCC ID: 2AB6Z-1859ATMBā
when the module is installed inside another device, the user manual of this device must contain below
warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. The device is indoor use only
The devices must be installed and used in strict accordance with the manufacturer's instructions as described
in the user documentation that comes with the product
Any
company
of of
thethe
host
performthe
thetest
testofofradiated
radiatedemission
emission
Any
company
hostdevice
devicewhich
whichinstall
installthis
thismodular
modularwith
withlimit
limitmodular
modular approval
approval should
should perform
and
spurious
emission
according
to
FCC
part
15C
and
15E:
15.247
and
15.407
and
15.209
requirement，
Only
if
the
test
result
and spurious emission according to FCC part 15C 15.247 and 15.209 requirement， Only if the test result comply with FCC partcomply
15C with
FCC part 15C and 15E: 15.247 and 15.407 and 15.209 requirement，then the host can be sold legally.
15.247 and 15.209 requirement，then the host can be sold legally.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Windows 用户
Create Date                     : 2015:07:29 22:38:49+08:00
Modify Date                     : 2015:07:29 22:38:49+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Windows 用户
Title                           : User Manual-20150721.pdf
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2015:07:29 22:35:40+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:4f18dc63-acf0-47d4-a7de-ecc32050e38c
Instance ID                     : uuid:02a292a8-7aaf-4372-9f0b-251641871c6e
Page Count                      : 4

EXIF Metadata provided by EXIF.tools