HUNG WAI BZT-T102 Buzztime 7 inch Tablet-T102 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3455908
Application ID	cBK/Zq73mzLRR3lXIsxgEA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.19kB (214884 bits)
Date Submitted	2017-07-08 00:00:00
Date Available	2017-07-08 00:00:00
Creation Date	2016-06-04 16:07:19
Document Lastmod	2017-07-08 07:59:05
Document Title	Users Manual
Document Creator	WPS Office
Document Author:	Wesley

Manual
Turning the Tablet on and off
To turn the tablet on:
Press and hold the Power button until the LCD screen turn on and you see startup logo, then wait
until you see the unlock screen.
To turn the tablet off:
1. Press and hold the Power button until the “turn tablet off” message appears.
2. Touch to Power off to turn off the tablet.
Turn the screen on and off(Standby)
When the tablet is on, you can turn off the screen to conserve battery power. Simply press the
power button once to turn the screen off, press the power button again to turn the screen back
on.
Tips: To conserve battery power, the screen can be set to turn off automatic when the tablet is
not use(between 15 seconds and 30 minutes). This sleep option can be found in the Display
menu.
Unlock the screen
When the screen turn off, you will have to unlock the screen when you turn it back on.
To unlock the screen, touch and drag the lock icon to the edge of the circle that appears.
If a password has been set, enter the password to unlock the screen, the screen unlock password
can be set in security menu.
Warning: Please write down your password lock pattern/Pin/Password, Misplacing or forgetting
this method will lock the user out.Recovering the unit will reset the device back to factory
defaults.
All YOUR DATA & PROGRAMS WILL BE LOST.
Your Tablet Home Screen
The home screen is the starting point for all of the features of your tablet.
1. Home icon
Touch to back to the central home screen.
2. Back icon
Touch to go back to the previous screen.
3. Recent Apps
Touch to display the list of thumbnails of apps you have worked recently. Touch a thumbnails to
open it
4. Applications Tab
Open the Application Launcher to view the list of all applications and widgets installed on the
tablet. Touch the application tab to open the launcher.
5. Icons
Touch a icon to open an application or application folder.
6. Notification bar
Show notification icons and time, battery level, plus the network signal strength; touch the bar to
open the full notification panel. Touch a notification icon to display more
details.
Default applications
To open an applications, touch the application icon on the home screen or in the application
menu.
(The screenshot shown above is for demonstration purposes only)
Applications will be sorted by name, the default apps are:
ApkInstaller: Install and manage the applications
Browser: Default internal browser
Calculator: Default science calculator
Calendar:Setup reminds on dates
Camera: Access front camera to take pictures
Clock:Would clock, Timer, and alarm setup.
Contacts:Manage contacts and friends
Downloads:Manage downloaded materials from internal.
Email: Setup your email account to access email.
Explorer: Manage files and folders on your tablet
Gallery: Browse saved pictures
Music: Play music stored in your tablet
Search: Search file
Setting: Manage your tablet settings
Sound recorder: Record microphone input
Video:Play video stored in your tablet
Connecting to the internet
This tablet can utilize WIFI data networks to connect to the internet.
Wireless Wi-Fi technology can provide internet access at distance of over 30m; however, this
distance can be affected by your surrounding environment and WIFI router.
In general, being closer to Wi-Fi router improve performance.
Connect to a Wi-Fi network
1. Turn on the Wi-Fi radio if it is not already on, To turn on Wi-Fi:
a.Go to the Home screen:
Touch the Home icon.
b.Open the launcher screen:
Touch the launcher tab,then touch settings
c.Open the wireless&networks menu:
Touch WIRELESS&NETWORKS.
d.Touch the Wi-Fi settins menu:
Touch Wifi
e.Make sure that the Wi-Fi option box is setted to ON: Touch and slide the block right to enable
the Wi-Fi connection.
When Wi-Fi is on, the tablet will look for and display a list of a list of available Wi-Fi networks.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet appareil est
conforme aux limitesd'exposition de rayonnement RF I SEDC établiespour un environnement non contrôlé.
Cetémetteur ne doit pas être co-implanté oufonctionner en conjonction avec toute aut reantenne ou transmetteur
FCC WARNING:
To assure continued operation, follow the attached installation instructions and
use only shield cables when connecting to other devices. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Wesley
Create Date                     : 2016:06:04 16:07:19+08:00
Modify Date                     : 2017:07:08 07:59:05-07:00
Subject                         : 
Trapped                         : false
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : WPS Office
Metadata Date                   : 2017:07:08 07:59:05-07:00
Format                          : application/pdf
Description                     : 
Creator                         : Wesley
Title                           : 
Keywords                        : 
Producer                        : 
Company                         : 
Comments                        : 
Source Modified                 : D:20160604160719+08'07'
Document ID                     : uuid:ae613fd6-504c-4157-b669-c588d1725ec2
Instance ID                     : uuid:452a21b9-f5e6-4298-bec1-b3b0e8a4d806
Page Count                      : 4

EXIF Metadata provided by EXIF.tools