HYUNDAI MOBIS ACB90G5AN DIGITAL CAR AUDIO SYSTEM User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2816971
Application ID	GG/0z7lT1dblDZd1ouUzMA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	133.58kB (1669795 bits)
Date Submitted	2015-11-19 00:00:00
Date Available	2016-05-15 00:00:00
Creation Date	2012-03-19 16:40:22
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2015-11-18 16:17:25
Document Title	Users Manual
Document Author:	Jon

Read the following safety cautions for your safety.
Please read the following safety matters for your safety. This User's Manual describes circumstances that may
inflict injury onto drivers and others with the following notations (Warning, Caution, Notice, Information).
Notations used within this User's Manual
Safety Warnings
Failure to observe the safety instructions within this category could result in serious injury or death.
Safety Cautions
Failure to observe the safety instructions within this category could result in accident related injuries or damage to the vehicle.
WARNING
• Possible Serious Injury or
Death
• Failure to observe safety
instructions in the 'Warning"
category could result in
serious injury or death.
CAUTION
• Possible Moderate or Minor
Injury
• Failure to observe safety
instructions in the "Caution"
category can result in
moderate or minor injury.
Information
• Additional information tips
and instructions are indicated
by this symbol (international
symbol for information).
NOTICE
• Possible vehicle damage
Failure to observe instructions
in the "Notice" category
could result in damage
to the vehicle.
Before Use
Thank you for purchasing this Audio System.
iPod®
This user's manual explains how to use the Audio System.
Before using the product, read the contents of this user's
manual carefully and use this product safely.
iPod is a registered trademark of Apple Inc.
The screens shown in this manual may differ with the actual
screens of the product.
The design and specification of this product may change
without prior notification for product improvement.
When transferring the vehicle to another individual, include
this user's manual so that the next driver can continue its use.
If the temperature inside the vehicle is too high, open the
vehicle windows for ventilation before using your audio system.
When listening to music by connecting an external device
(USB/iPod, AUX), the device may become disconnected when
driving on unpaved roads if the connection state worsens due to
severe vibrations.
Some USB/iPod devices may not operate depending on the
manufacturer, method of manufacturer or recording method. In
such cases, continued use may lead to malfunctions.
When using the Bluetooth® feature, supported options may
differ depending on the manufacturer and the mobile phone
model. (For more information on Bluetooth® compatibility, refer
to the Hyundai Motor or Kia Motors website.)
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth® SIG, Inc. and any use of such marks by
Hyundai/Kia is under license.
A Bluetooth® enabled cell phone is required to use Bluetooth®
wireless technology.
®
Bluetooth®
시작하기 전에
Thank you for purchasing this Audio System.
iPod®
Basic
This user's manual explains how to use the Audio System.
Before using the product, read the contents of this user's
manual carefully and use this product safely.
iPod is a registered trademark of Apple Inc.
The screens shown in this manual may differ with the actual
screens of the product.
The design and specification of this product may change
without prior notification for product improvement.
When transferring the vehicle to another individual, include
this user's manual so that the next driver can continue its use.
차내 온도가 높을 경우, 창을 열어 환기를 시킨 후 오디오를 동
작시켜 주십시오.
외부기기(USB/iPod, AUX)를 연결하여 음악을 들으며 비포장
도로를 운행할 때 차체 내에 심한 충격이 가해지면 연결상태(접
촉불량)가 나빠져서 연결이 해제되는 현상이 발생할 수 있습니다.
USB/iPod을 사용하실 경우에는 각 매체의 제조회사 및 제조방
법과 사용자의 녹음 방식에 따라 재생이 안될 수도 있습니다. 이
경우, 계속하여 사용하면 고장의 원인이 될 수 있습니다.
블루투스 기능을 사용하실 경우, 각 제조회사의 휴대폰 모델에
따라 지원되는 내용이 상이할 수 있습니다. (블루투스폰 호환성
관련 사항은 현대자동차 또는 기아자동차 홈페이지를 참조하십
시오.)
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth® SIG, Inc. and any use of such marks by
Hyundai/Kia is under license.
A Bluetooth® enabled cell phone is required to use Bluetooth®
wireless technology.
®
 Warnings and Cautions
Bluetooth®
 Component Names and Functions
HD RadioTM
HD Radio Technology manufactured under license from iBiquity
Digital Corporation. U.S. and Foreign Patents. HD Radio™ and
the HD, HD Radio, and “Arc” logos are proprietary trademarks
of iBiquity Digital Corp.
1 Basic
Warnings and Cautions
Safety Warnings
Do not s tare a t the s creen while d riving. Staring a t the screen for
prolonged periods of time could lead to traffic accidents.
Do not disassemble, assemble, or modify the audio system. Such acts
could result in accidents, fire, or electric shock.
Using the phone while driving may lead to a lack of attention of traffic
conditions and increase the likelihood of accidents. Use the phone
feature after parking the vehicle.
Heed caution not t o spill water or intr oduce f oreign objects int o t he
device. Such acts could lead to smoke, fire, or product malfunction.
Please refra in fro m use if the screen is blank or no sound can be
heard as these signs may indicate product malfunction. Continued use
in such con ditions cou ld lead to ac cidents(fires, e lectric shock) or
product malfunctions.
Do not touch the antenna during thunder or lightening as
such acts may lead to lightning induced electric shock.
Do not stop or park in parking-restricted areas to operate
the product. Such acts could lead to traffic accidents.
Safety Cautions
Operating the device while driving could lead to accidents due to a
lack of attention to external surroundings. First park the vehicle before
operating the device.
Adjust the volume to levels that allow the driver to hear sounds from
outside of the vehicle. Driving in a state where external sounds cannot
be heard may lead to accidents.
Pay attention to the volume setting when turning the device on. A
sudden output of extreme volume upon turning the device on could
lead to hearing impairment. (Adjust the volume to a suitable levels
before turning off the device.)
If you want to change the position of device installation, please inquire
with your place of purchase or service maintenance center. Technical
expertise is required to install or disassemble the device.
Turn on the car ignition before using this device. Do not operate the
audio system for long periods of time with the ignition turned off as
such operations may lead to battery discharge.
Do not subject the device to severe shock or impact. Direct pressure
onto the front side of the monitor may cause damage to the LCD or
touch screen.
When cleaning the device, make sure to turn off the device and use a
dry and smooth cloth. Never use tough materials, chemical cloths, or
solvents (alcohol, benzene, thinners, etc.) as such materials may
damage the device panel or cause color/quality deterioration
Do not place beverages close to the audio system. Spilling beverages
may lead to system malfunction.
In case of product malfunction, please contact your place of purchase
or After Service center.
1 Basic
Steering Remote Controller
No.
Name
Description
• Each time this key is pressed, the mode is changed in order of FM1→ FM2→
FMA→ AM→ AMA→ USB or iPod→ AUX My Music →BT Audio
[MODE
[Vol]
• If the media is not connected or a disc is not inserted,
corresponding modes will be disabled.
Used to control volume
When, V, Λ keys are pressed shortly (under 0.8 seconds)
• In FM/AM mode, searches broadcast frequencies saved to
presets.
• In CD/USB/iPod/My Music/BT Audio modes, changes the
track, file or chapter
HG 이미지로 교체 필요
V, Λ
When, V, Λ keys are pressed shortly (over 0.8 seconds)
• In FM/AM mode, automatically searches broadcast frequencies and channels
• In CD/USB/iPod/My Music/BT Audio modes, rewinds or fast
forwards the track or file
* BT Audio mode may not be supported in some mobile phones.
When pressed shortly (under 0.8 seconds)
• Starts voice recognition
• When selecting during a voice prompt, stops the prompt and converts to voice
command waiting state
When pressed and held (over 0.8 seconds)
• Ends voice recognition
When pressed shortly (under 0.8 seconds)
• When pressed in the phone screen, displays call history screen
• When pressed in the dial screen, makes a call
• When pressed in the incoming call screen, answers the call
• When pressed during call waiting, switches to waiting call (Call Waiting)
When pressed and held (over 0.8 seconds)
• When pressed in the Bluetooth® Handsfree wait mode,
redials the last call
• When pressed during a Bluetooth® Handsfree call,
switches call back to mobile phone (Private)
• When pressed while calling on the mobile phone, switches
call back to Bluetooth® Handsfree
• (Operates only when Bluetooth® Handsfree is connected)
Ends phone call
Mute
Mutes audio volume
2
Audio
 Switching between
Radio/Media Mode
 Radio Mode
 USB Mode
 iPod Mode
 AUX Mode
 My Music Mode
 Bluetooth® Audio Mode
2 Audio
Switching between Radio/Media Mode
Switching to Radio Mode
Pressing the [RADIO] key will change the
operating mode in order of FM1 → FM2 →
FMA → AM → AMA.
If [Pop-up Mode] is turned on within [Setup] ▶
[Display], then pressing the [RADIO] key will
display the Radio Pop-up Mode screen.
Turn the [TUNE/FILE] knob to move the focus.
Press the [OK] key to select.
Switching to Media Mode
Pressing the [MEDIA] key will change the
operating mode in order of CD  USB(iPod)
 AUX  My Music  BT Audio.
If [Pop-up Mode] is turned on within [Setup] ▶
[Display], then pressing the [MEDIA] key will
display the Media Pop-up Mode screen.
Turn the [TUNE/FILE] knob to move the focus.
Press the [OK] key to select.
2 Audio
Radio Mode
Basic Mode Screen
No.
RDS_01
Name
Description
Mode Display Displays currently operating mode
Frequency
current frequency
Preset
Displays current preset number [1] ~ [6]
Preset
Display
Displays saved presets
Autostore
RDS Menu
Displays the RDS Menu
RDS Info
Displays RDS broadcast information
12:05
FM1
PS Name
PTY Name
87.90
Preset
AST
RDS Menu
Automatically saves frequencies with superior
reception to Preset buttons
2 Audio
Searching Radio Frequencies
Using Seek
Press the [SEEK(<)],[TRACK(>)] keys to
play the previous/next frequency.
Using Radio Mode
Selecting /Saving Presets
Press the [1]~[6] buttons to play the
desired preset.
Auto Store
Press the [Autostore] button to
automatically save receivable frequencies
to Preset buttons.
RDS_01
EU_Radio_AS
Using TUNE
Turn the [TUNE/FILE] knob to select the
desired frequency.
FM : Increases/decreased by 50kHz
AM : Increases/decreased by 9kHz
Press the [Preset] button to display the
broadcast information for the frequency
saved to each button.
Information
RDS_02
While listening to a frequency you want to
save as a preset, press and hold one of
the [1] ~ [6] preset buttons (over 0.8
seconds) to save the current frequency to
the selected preset.
• While Auto Store is operating, pressing
the [Cancel] button again will cancel Auto
Store and restore the previous frequency.
10
2 Audio
RDS Menu
Scan
Press the [RDS Menu] button to set the
AF (Alternative Frequency), Region and
News features.
Press and hold the [TA/SCAN] key (over
0.8 seconds) to preview frequencies with
superior reception for 5 seconds each.
Information

RDS_03
• Once scan is complete, the previous
frequency will be restored.
• While Scan is operating, pressing and
holding the [TA/SCAN] key (over 0.8
seconds) will cancel the scan operation.
Information
• The RDS Menu is not supported within
AM or AMA mode.
11
2 Audio
Program Type
TA (Traffic Announcement)(Icon)
Press the [PTY/FOLDER] key to search
for the desired Program type.
Press the [TA/SCAN] key to turn the TA
(Traffic Announcement) feature On/Off.
RDS_05
RDS_04
Turn the [TUNE/FILE] knob left/right to
search for the desired program type. Once
you find the desired program type, press
the [TUNE/FILE] knob.
After selecting the desired Program Type
and while the Program Type is blinking
(approximately 5 seconds), pressing the
[(∨)SEEK], [TRACK(∧)] key will allow
you to select a different Program Type
broadcast.
2 Audio
MP3 File Information
• Supported Audio Formats
File
System
Audio
Compress
ion
ISO 9660 Level 1
ISO 9660 Level 2
Romeo / Juliet (128 characters)
MPEG1 Audio Layer3
MPEG2 Audio Layer3
MPEG2.5 Audio Layer3
Windows Media Audio Ver 7.X & 8.X
※ File formats that do not comply with the
above formats may not be properly recognized
or play without properly displaying file names
or other information.
• Support for Compressed Files
1. Supported Bitrates (Kbps)
2. Sampling Frequencies (Hz)
MPEG1
MPEG2
MPEG2.5
WMA
44100
22050
11025
32000
48000
24000
12000
44100
3000
16000
8000
48000
- For MP3/WMA compression files, differences
in sound quality will occur depending on the
bitrate.
(Higher sound quality can be experienced
with higher bitrates.)
- This device only recognizes files with
MP3/WMA extensions. Other file extensions
may not be properly recognized.
3. Maximum number of recognized folders and
files
- Folder : 255 folders for CD, 2,000 folders for
USB
- File : 999 files for CD, 6,000 files for USB
- There are no limitations to the number of
recognized folder levels
• Language Support (Unicode Support)
1. Korean: 2,604 characters
2. English: 94 characters
3. Special characters and Symbols : 986
characters
※ Languages other than Korean and English
(including Chinese) are not included.
4. Text Display (Based on Unicode)
- File name: Maximum 64 English characters
(64 Korean characters)
- Folder name: Max 32 English characters (32
Korean characters)
※ Using the scroll feature allows you to see the
entire name of files with names that are too long
to be displayed at once.
2 Audio
USB Mode
Before playing a USB MP3
• Connect the USB device after turning on
the engine. The USB device may become
damaged if it is already connected when
the ignition is turned on.
• The USB device may not operate
properly if the car ignition is turned on or
off with the USB device connected.
• Heed caution to static electricity when
connecting/disconnecting USB devices.
• Encoded MP3 Players will not be
recognized when connected as an
external device.
• When connecting an external USB
device, the device may not properly
recognize the USB is in some states.
• Only products formatted with
byte/sectors under 64Kbyte will be
recognized.
• This device recognizes USB devices
formatted in FAT 12/16/32 file formats.
This device does not recognize files in
NTFS file format.
• Some USB devices may not be
supported due to compatibility issues.
• Avoid contact between the USB
connector with bodily parts or foreign
objects.
• Repeated connecting/disconnecting of
USB devices within short periods of time
may result in product malfunction.
• A strange noise may occur when
disconnecting the USB.
• Make sure to connect/disconnect
external USB devices with the audio
power turned off.
• The amount of time required to
recognize the USB device may differ
depending on the type, size or file formats
stored in the USB. Such differences in
time are not indications of malfunctions.
• The device only supports USB devices
used to play music files.
• USB images and videos are not
supported.
• Do not use the USB I/F to charge
batteries or USB accessories that
generate heat. Such acts may lead to
worsened performance or damage to the
device.
• The device may not recognize the USB
device if separately purchased USB hubs
and extension cables are being used.
Connect the USB directly with the
multimedia terminal of the vehicle.
• When using mass storage USB devices
with separate logical drives, only files
saved to the root drive can be played.
• Files may not properly operate if
application programs are installed to the
USBs.
• The device may not operate normally if
MP3 Players, cellular phones, digital
cameras, or other electronic devices (USB
devices not recognized as portable disk
drives) are connected with the device.
• Charging through the USB may not work
for some mobile devices.
• The device may not support normal
operation when using a USB memory type
besides (Metal Cover Type) USB Memory.
2 Audio
• The device may not support normal
operation when using formats such as
HDD Type, CF, or SD Memory.
• The device will not support files locked
by DRM (Digital Rights Management.)
• USB memory sticks used by connecting
an Adaptor (SD Type or CF Type) may
not be properly recognized.
• The device may not operate properly
when using USB HDDs or USBs subject
to connection failures caused by vehicle
vibrations. (e.g. i-stick type)
• Avoid use of USB memory products that
can also be used as key chains or mobile
phone accessories. Use of such products
may cause damage to the USB jack.
Plug type connector
• Connecting an MP3 device or phone
through various channels, such as
AUX/BT or Audio/USB mode may result
in pop noises or abnormal operation.
2 Audio
Basic Mode Screen
No.
Name
Mode
Displays currently operating mode
Operation
Status
From Repeat/Shuffle/Scan, displays the currently
operating function.
File Index
Displays the current file number
File Info
Displays information about the current file
Play State
Displays the play/pause state
Play Time
Displays the current play time
Info
Displays additional information for the current file
Shuffle
Turns the Shuffle feature on/off
(Shuffle Folder, Shuffle All)
Repeat
Turns the Repeat feature on/off
(Repeat, Repeat Folder)
10
Copy
Copies the current file into My Music
11
List
Moves to the list screen
EU_USB_01
Description
10
11
2 Audio
Using USB Mode
Rewinding / Fast-forwarding Files
Changing Files
Playing/Pausing USB Files
Once a USB is connected, the mode will
automatically start and begin playing a
USB file.
EU_USB_05
Press the [(∨)SEEK], [TRACK(∧)] keys to
move to the previous or next file.
Information
• Pressing the [(∨)SEEK] key after the file
has been playing for 3 seconds will start
the current file from the beginning.
• Pressing the [SEEK(<)] key before the
file has been playing for 3 seconds will
start the previous file.
key to pause
Turn the [TUNE/FILE] knob left/right to
search for the desired file.
Press and hold the [TA/SCAN] key (over
0.8 seconds) to play the first 10 seconds
of each file.
Press the [PTY/FOLDER] key to select
and search folders.
USB
Information
• Loading may require additional time if
there are many files and folders within
the USB and result in faulty list display
or file searching. Normal operations will
resume once loading is complete.
• The device may not support normal
operation when using a USB memory
type besides (Metal Cover Type) USB
Memory.
Scan
Searching Folders
Selecting from the List
While playing, press the
and press
key to play.
While playing, press and hold the
[(∨)SEEK], [TRACK(∧)] keys (over 0.8
seconds) to rewind or fast-forward the
current file.
EU_USB_02
12:05
 최상위 폴더
 폴더 1
▶
USB_03
▲
폴더 2
 폴더 3
▼

Once you find the desired file, press the
[TUNE/FILE] knob to start playing.
Once the desired folder is displayed,
press the [TUNE/FILE] knob to select. The
first file within the selected folder will
begin playing.
2 Audio
USB Mode Menu
Within this mode, you will have access to
the Info, Shuffle, Repeat, Copy and List
features.
EU_USB_01
Information
• When the ‘Folder File’ option is set as
the default display within Display setup,
the album/artist/file information are
displayed as detailed file information.
• When the ‘Album Artist Song’ option is
set as the default display, the folder
name/file name are displayed as detailed
file information.
Cautions
• The title, artist and album info are
displayed only when such information
are recorded within the MP3 file ID3 tag.
Repeat
Press the [Repeat] button to repeat the
current file or folder.
Each time the button is pressed, the feature
changes in order of Repeat → Repeat Folder
→ Off.
Repeat (Icon) : Repeats the current file.
Repeat Folder (Icon) : Repeats all
files within the current folder.
Info
Shuffle
Press the [Info] button to display details
about the current file.
EU_USB_04
Press the [Shuffle] button to play files in
random order.
Each time the button is pressed, the
feature changes in order of Shuffle
Folder → Shuffle All → Off.
Copying Files
Press the [Copy] button to copy the
current file into My Music.
Information
Shuffle Folder : Plays the files in the
current folder in random order.
Shuffle All : Plays all files in random
order.
• Selecting another feature during copying
will display a pop-up asking whether you
wish to cancel copying. To cancel,
select 'Yes’.
2 Audio
List
Press the [List] button to display the file
list screen.
EU_USB_02
Turn the [TUNE/FILE] knob left/right to
search for files. Once the desired file is
displayed, press the knob to select and
play.
2 Audio
iPod Mode
Using iPod Devices
(iPod is a registered trademark of Apple Inc.)
• In order to use the iPod while operating the
keys, you must use a dedicated iPod cable.
(the cable that is supplied when purchasing
iPod/iPhone products)
• During ACC ON state, connecting the iPod
through the iPod cable (the cable that is
supplied when purchasing iPod/iPhone
products), will charge the iPod through the
head unit.
•When connecting with the iPod cable, make
sure to fully insert the jack to prevent
communication interference.
• When the EQ features of an external device,
such as the iPod, and the audio system are
both active, EQ effects could overlap and
cause sound deterioration and distortion.
Whenever possible, turn off the EQ feature
within the external device upon use by
connecting with the audio system.
•Noise may occur when an iPod or AUX
device is connected. When such devices are
not being used, disconnect the device for
storage.
• When the iPod or AUX device power is
connected to the power jack, playing the
external device may result in noise. In such
cases, disconnect the power connection
before use.
• Skipping or improper operation may occur
depending on the characteristics of your
iPod/Phone device.
•If your iPhone is connected to both the
Bluetooth® and USB, the sound may not be
properly played. In your iPhone, select the
Dock connector or Bluetooth® to change the
sound output (source).
• iPod mode cannot be operated when the
iPod cannot be recognized due to the playing
of versions that do not support communication
protocols, cases of iPod abnormalities and
defects.
• For fifth generation iPod Nano devices,
the iPod may not be recognized when the
battery level is low. Please charge the iPod for
use.
• Search/play orders shown within the iPod
device may differ with the orders shown within
the audio system.
• If the iPod malfunctions due to an iPod
device defect, reset the iPod and try again. (To
learn more, refer to your iPod manual)
• In order to play the iPod by operating the
keys, you must use the dedicated iPod cable
(the cable that is supplied when purchasing
iPod/iPhone products).
※ During ACC ON state, connecting the iPod
through the iPod cable (the cable that is
supplied when purchasing iPod/iPhone
products), the iPod will be charged through the
head unit.
• When connecting with the iPod cable, make
sure to fully insert the jack to prevent
communication interference. If the iPod is
connected to the vehicle while it is playing, a
high pitch sound could occur for approximately
1-2 seconds immediately after connecting. If
possible, connect the iPod to the vehicle with
the iPod stopped/paused.
• Within the iPhone, the streaming audio
feature and iPod control features may conflict.
If problems persist, remove the iPhone and
connect again.
• Some iPods may not sync with the System
depending on its version. If the Media is
removed before the Media is recognized, then
the system may not properly restore the
previously operated mode. (iPad charging is
not supported.)
2 Audio
Basic Mode Screen
No.
iPod
12:05
1/10000
 Album Name
 Artist Name
Description
Mode
Displays currently operating mode
Operation
State
From Repeat/Shuffle, displays the currently
operating function
Song Index
Displays the current song/total number of songs
Song Info
Displays information about the current song
Play State
Displays the play/pause state
Play Time
Displays the current play time
Shuffle
Turns the Shuffle feature on/off
(Shuffle Album, Shuffle All)
Repeat
Turns the Repeat feature on/off
(Repeat)
List
Moves to the list screen
 Song Title 01
00:01
랜덤
Name
반복
목록
2 Audio
Using iPod Mode
Changing Songs
Playing/Pausing iPod Songs
Once an iPod is connected, the mode will
automatically start and begin playing an
iPod song.
Press the [(∨)SEEK], [TRACK(∧)] keys to
move to the previous or next song.
Searching Categories
Turn the [TUNE/FILE] knob left/right to
search for the desired category.
12:05
iPod
iPod
12:05
1/10000
 Album Name
 Artist Name
 Song Title 01
랜덤
반복
While playing, press the
and press
key to play.
00:01
목록
key to pause
Information
• Pressing the [(∨)SEEK] key after the
song has been playing for 3 seconds will
start the current song from the beginning.
• Pressing the [SEEK(<)] key before the
song has been playing for 3 seconds will
start the previous song.
• Slight time differences may exist
depending your iPod product.
 최상위 폴더
1/3
 재생목록
▲
 아티스트
▼
 앨범

최상위 폴더

Once you find the desired category, press
the [TUNE/FILE] knob to select and play.
Information
Information
• Some iPods with unsupported
communication protocols may not properly
operate in the audio system.
• There are eight categories that can be
searched, including Playlists, Artists,
Albums, Songs, Genres, Composers,
Audiobooks and Podcasts.
2 Audio
iPod Mode Menu
Category Menu
Within this mode, you will have access to
the Shuffle, Repeat and List features.
Within the iPod Category menu, you will
have access to the [], [Home], and []
features.
iPod
12:05
12:05
iPod
 최상위 폴더
 Album Name
 Artist Name
 Song Title 01
▲
 아티스트

랜덤
최상위 폴더
반복
목록
List

Shuffle
Name
Description
1. 
Displays the play screen
2. 최상위 폴더
Moves to the iPod root
category screen
3. 
Moves to the previous
category
Information
• If the search mode is accessed while
playing a song, the most recently
searched category is displayed.
• Search steps upon initial connection
may differ depending on the type of iPod
device.
Repeat : Repeats the current song
00:01
▼
 앨범
Press the [Repeat] button to repeat the
current song. Press the button again to turn
the repeat feature off.
1/10000
1/3
 재생목록
Repeat
Press the [Shuffle] button to play songs in
random order.
Each time the button is pressed, the
feature changes in order of Shuffle
Album  Shuffle All  Off.
Shuffle Album : Plays songs within the
current category in random order.
Shuffle All : Plays all songs in random
order
Press the [List] button to display the
Category Menu.
2 Audio
AUX Mode
Using AUX Mode
Press the [MEDIA] key ▶ Select [AUX]
EU_AUX_01
An external device can be connected to
play music.
Information
• If an external device connector is
connected with the AUX terminal, then
AUX mode will automatically operate.
Once the connector is disconnected, the
previous mode will be restored.
• AUX mode can be used only when an
external audio player (camcorder, car
VCR, etc.) has been connected.
• The AUX volume can be controlled
separately from other audio modes.
Caution
Connecting an External Device
• Connecting a connector jack to the
AUX terminal without an external
device will convert the system to AUX
mode, but only output noise. When an
external device is not being used, also
remove the connector jack.
• When the external device power is
connected to the power jack, playing
the external device may output noise.
In such cases, disconnect the power
connection before use.
• Fully insert the AUX cable to the AUX
jack upon use.
External audio players
(Camcorders, car VCR, etc.) can be
played through a dedicated cable.
2 Audio
My Music Mode
Basic Mode Screen
No.
Name
Mode
Displays currently operating mode
Operation
State
From Repeat/Shuffle/Scan, displays the currently
operating function.
File Index
Displays the current file/total number of files
File Info
Displays information about the current file
Play State
Displays the play/pause state
Play Time
Displays the current play time
Info
Displays additional information for the current file
Shuffle
Turns the Shuffle feature on/off
Repeat
Turns the Repeat feature on/off
10
Delete
Deletes the current file
11
List
Moves to the list screen
EU_My_01
Description
10
11
2 Audio
Using My Music Mode
Playing/Pausing My Music Files
Changing Files
Rewinding / Fast-forwarding Files
Press the [(∨)SEEK], [TRACK(∧)] keys to
move to the previous or next file.
EU_My_05
Information
• Pressing the [(∨)SEEK] key after the file
has been playing for 3 seconds will start
the current file from the beginning.
• Pressing the [SEEK(<)] key before the
file has been playing for 3 seconds will
start the previous file.
While playing, press the
and press
key to play.
key to pause
Information
• If there are no files saved within My
Music, the [My Music] button will be
disabled.
Selecting from the List
Turn the [TUNE/FILE] knob left/right to
search for the desired file.
EU_My_02
Once you find the desired file, press the
[TUNE/FILE] knob to start playing.
While playing, press and hold the
[(∨)SEEK], [TRACK(∧)] keys (over 0.8
seconds) to rewind or fast-forward the
current file.
Scan
Press and hold the [TA/SCAN] key (over
0.8 seconds) to play the first 10 seconds
of each file.
2 Audio
My Music Mode Menu
Within this mode, you will have access to
the Info, Shuffle, Repeat, Delete and List
features.
EU_My_01
Shuffle
List
Press the [Shuffle] button to play files in
random order. Press the button again to
turn the shuffle feature off.
Press the [List] button to display the file
list screen.
Shuffle : Plays all files in random
order.
My_02
Repeat
Press the [Repeat] button to repeat the
current song. Press the button again to
turn the repeat feature off.
Info
Press the [Info] button to display details
about the current file.
Repeat : Repeats the current file.
Deleting Files
EU_My_03
Caution
• The title, artist and album info are
displayed only when such information is
recorded within the MP3 file ID3 tag.
Press the [Delete] button to delete the
current file.
Turn the [TUNE/FILE] knob left/right to
search for files. Once the desired file is
displayed, press the knob to select and
play.
2 Audio
List Menu
From the List screen, it is possible to
delete files you previously saved into My
Music.
After selecting the files you want to delete,
press the [Delete] button to delete the
selected files.
Information
My_04
Press the [Mark All] button or individually
select the files you want to delete. Once
files are selected, the [Unmark All] and
[Delete] buttons will be enabled.
Name
Description
1. 
Moves to the previous screen
2. Mark All
Selects all files
3. Unmark All
Deselects all selected files
4. Delete
Deletes selected files
•If there is memory available, up to
6,000 files can be saved.
• Identical files cannot be copied more
than 1,000 times.
• To check memory information, go to
[SETUP] ▶ [System] ▶ Memory
Information.
2 Audio
Bluetooth® Audio Mode
About Using Bluetooth® Audio
Bluetooth® Audio Mode can be used only when a Bluetooth®
phone has been connected.
(However, A2DP must be connected).
While Bluetooth® Audio is playing, if the Bluetooth® phone is
connected, then the music will also stop.
Bluetooth® streaming audio may not be supported in some
mobile phones.
Moving the Track up/down while playing Bluetooth® audio
mode may result in pop noises in some mobile phones.
Bluetooth® streaming audio may not be supported in some
mobile phones. For more information on compatible devices,
visit the Blu Members website (http://bl.hyundai.com).
When returning to Bluetooth® Audio mode after ending a call,
the mode may not automatically restart in some mobile phones.
2 Audio
Using Bluetooth® Audio Mode
Playing/Pausing Bluetooth® Audio
Once a Bluetooth® device is connected,
the mode will automatically start.
12:05
BT Audio
BT_Audio
If a Bluetooth® device has not been
connected, press the [SETUP] key
▶[Phone] button to display the
Bluetooth®
connection screen.
Setup
While playing, press the [▶ll] key ot
pause and press [▶ll] key to play.
Information
The play/pause feature may operate
differently depending on the mobile
phone.
Changing Files
Press the [(∨)SEEK], [TRACK(∧)] keys
to move to the previous or next file.
12:05
폰
1/3
등록 폰 목록(1/5)
▶
▶
전화번호부 다운로드
▶
신규 폰 등록
▶ll
Information
Setting Connection

It is possible to use the pair phone,
connect/disconnect and delete features
from your Bluetooth® phone.
▲
▼
• If the Bluetooth® audio is not operating
properly, check whether the feature is
turned off at [SETUP] ▶ [Phone] ▶
[Audio streaming]. If the feature is off, turn
back on and try again.
• If music is not yet playing from your
mobile device after converting to
Bluetooth® Audio mode, pressing the play
button once may start playing the mode.
Check to see that music is playing from
the Bluetooth® device after converting to
Bluetooth® Audio Mode.
3
Bluetooth®
 About Using Bluetooth®
 Pairing a Bluetooth® Device
 Connecting Bluetooth®
 Using Bluetooth®
3 Bluetooth®
About Using Bluetooth®
Using Bluetooth® Handsfree
What is Bluetooth®?
Bluetooth® refers to a short-distance wireless networking
technology which uses a 2.45GHz frequency to connect
various devices within a certain distance.
Supported within PCs, external devices, Bluetooth®
phones, PDAs, various electronic devices, and automotive
environments, Bluetooth® allows data to be transmitted at
high speeds without having to use a connector cable.
Bluetooth® Handsfree refers to a device which allows the
user to conveniently make phone calls with Bluetooth®
mobile phones through the audio system.
※Some features may not be supported in some mobile
phone. To check out lists of compatible mobile phones,
visit the Blu Members website blu.hyundai.com.
Precautions for Safe Driving
Bluetooth® Handsfree is a feature that enables drivers
to practice safe driving. Connecting the head unit with a
Bluetooth® phone allows the user to conveniently make
calls, receive calls, and manage the phone book. Before
using the Bluetooth®, carefully read the contents of this
user’s manual.
Excessive use or operations while driving may lead
to negligent driving practices and be the cause of
accidents.
Do not operate the device excessively while
driving.
Viewing the screen for prolonged periods of time is
dangerous and may lead to accidents. When driving, view
the screen only for short periods of time.
3 Bluetooth®
Cautions upon Connecting Bluetooth®
Phones
Before
connecting the head unit with the mobile phone, check
to see that the mobile phone supports Bluetooth® features.
Even if the phone supports Bluetooth®, the phone will not be
found during device searches if the phone has been set to
hidden state or the Bluetooth® power is turned off. Disable the
hidden state or turn on the Bluetooth® power prior to
searching/connecting with the Head unit.
If you do not want to automatically connect your Bluetooth®
phone, try the following.
1. Turn off the Bluetooth® feature in your mobile phone
- For more information on Bluetooth® features within your
mobile, refer to your mobile phone user’s manual.
2. Turn off the Bluetooth® feature in your car audio system
- To turn off the Bluetooth® feature in your car audio system,
go to [SETUP] > Phone and turn off the Bluetooth® feature.
Park the vehicle when connecting the car audio system with
your mobile phone.
Bluetooth® connection may become intermittently disconnected
in some mobile phones. Follow these steps to try again.
1. Turn the Bluetooth® function within the mobile phone off/on
and try again.
2. Turn the mobile phone power Off/On and try again.
3 Completely remove the mobile phone battery, reboot, and
then again.
4. Reboot the audio system and try again.
5. Delete all paired devices, pair and try again.
The Handsfree call volume and quality may differ depending on
the mobile phone.
• Bluetooth® features supported within the vehicle are as
follows. Some features may not be supported depending
on your Bluetooth® device.
- Answering and placing Bluetooth® Handsfree calls
- Menu operation during call (Switch to Private, Switch to call
waiting, Outgoing volume)
- Download Call History
- Download Mobile Contacts
- Contacts/ Call History Auto Download
- Bluetooth® device auto connection
- Bluetooth® Audio
• It is possible to pair up to five Bluetooth® devices to the car
system.
• Only one Bluetooth® device can be connected at a time.
• Other devices cannot be paired while a Bluetooth® device is
already connected.
• When a Bluetooth® device is being connected, the connection
process cannot be canceled.
• Only Bluetooth® Handsfree and Bluetooth® audio related
features will operate within this system.
• Normal operation is possible only for devices that support
Handsfree or audio features, such as a Bluetooth® mobile
phone or a Bluetooth® audio device.
• Only one function can be used at a time between the Bluetooth®
Handsfree and Bluetooth® audio. (While playing Bluetooth® audio,
streaming will end upon entering the
Bluetooth® phone screen.)
• If a connected Bluetooth® device becomes disconnected for various
reasons, such as being out of range, turning the device OFF, or a
Bluetooth® communication error, Bluetooth® devices are
automatically searched and connected.
3 Bluetooth®
Pairing a Bluetooth® Device
Pairing [PHONE] Key / [] Key on
Name
the Steering Remote Controller
1. Device
Name of device as shown
when searching from your
Bluetooth® device
2. Passkey
Passkey used to pair the
device
When No Devices have been Paired
What is Bluetooth® Pairing?
Pairing refers to the process of
synchronizing your Bluetooth® phone or
device with the car audio system for
connection. Pairing is necessary to
connect and use the Bluetooth® feature.
Customarily, pairing Bluetooth® devices
can be done by either searching and
pairing from the car audio system or
searching and pairing from the Bluetooth®
phone.
1. Press the [PHONE]] key or the [] key
on the steering remote controller. The
following screen is displayed.
2. Press the [OK] button to enter the Pair
Phone screen.
12:05
Setup
트랙 01
블루투스 폰에서 기기이름을
검색 후 등록하여 주십시오.
The car audio system can be searched
and paired from your Bluetooth® device.
Description
3. From your Bluetooth® device (i.e. Mobile
Phone), search and select your car audio
system.
4. After a few moments, a screen is
displayed where the passkey is entered.
Here, enter the passkey “0000” to pair your
Bluetooth® device with the car audio
system.
5. Once pairing is complete, the following
screen is displayed.
OK
12:05
Setup
12:05
Setup
Phone>Pair Phone
트랙 01
Device : Santa Fe
Passkey : 0000
Cancel
폰>폰 등록
트랙 01
Phone name
등록되었습니다.
확인
3 Bluetooth®
Information
Pairing through [PHONE] Setup
• If Bluetooth® devices are paired but
none are currently connected, pressing
the [PHONE] key or the [] key on the
steering remote controller displays the
following screen. Press the [Pair] button to
pair a new device or press the [Connect]
to connect a previously pair device.
Press the [SETUP] key ▶ Select [Phone]
▶ Select [Pair Phone] ▶ Select [OK]
Title
12:05
To use Bluetooth® calling.
You need to pair or connect a phone
Connect
폰
12:05
1/3
등록 폰 목록(1/5)
▶
▶
전화번호부 다운로드
▶
신규폰 등록
▲
▼

Pair
Setup
Cancel
1. The following steps are the same as the
steps described in the “When No Devices
have been Paired” section.
Information
• The waiting period during phone pairing
will last for one minute. The pairing
process will fail if the device is not paired
within the given time. If the pairing
process fails, you must start the process
from the beginning.
• Generally, most Bluetooth® devices will
automatically connect once pairing is
complete. However, some devices may
require a separate verification process to
connect. Check to see whether
Bluetooth® has been properly connected
within your mobile phone.
• List of paired Bluetooth® devices can
be viewed at [SETUP] ▶ [Phone] ▶
[Paired Phone List].
3 Bluetooth®
Connecting Bluetooth®
12:05
Connecting a Device
Press the [SETUP] key ▶ Select [Phone]
▶Select [Paired Phone List]
Setup
12:05
폰
트랙 01
Phone name
연결되었습니다.
Press the [SETUP] key ▶ Select [Phone]
▶ Select [Paired Phone List]
Setup
12:05
폰>등록 폰 목록
▶
▶
Phone name 1
Phone name 2
1/3
등록 폰 목록(1/5)
▶
▶
전화번호부 다운로드
▶
신규폰 등록
▲

Changing Priority

What is Priority?
Setup
12:05
폰>등록 폰 목록
Phone name 1
Phone name 2
▶
▶
▲
▼

폰 연결
Name
삭제
연결 순서 변경
Description
1. Device
Device that is paired but
not connected
2. Connected
Phone
Device that is currently
connected
From the paired phone list, select the
device you want to connect and press
the [Connect] button.
▼
확인
▼
It is possible to pair up to five Bluetooth®
devices with the car audio system. As a
result, the “Change Priority’ feature is
used to set the connection priority of
paired phones.
However, the most recently connected
phone will always be set as the highest
priority.
▲
폰 연결
삭제
연결 순서
변경
From the paired phone list, select the
phone you want to change to the highest
priority, then press the [Change Priority]
button from the Menu. The selected
device will be changed to the highest
priority.
12:05
트랙 01
연결순서가 변경되었습니다.
확인
Information
• When a device is currently connected,
even if you change the priority to a
different device, the currently connected
phone will always be set as the highest
priority.
3 Bluetooth®
Disconnecting a Device
Deleting a Device
Press the [SETUP] key ▶ Select [Phone]
▶Select [Paired Phone List]
Press the [SETUP] key ▶ Select [Phone]
▶Select [Paired Phone List]
Setup
12:05
Information
Setup
12:05
폰>등록 폰 목록
폰>등록 폰 목록
▶
▶
Phone name 1
Phone name 2
▲
▶
▶
Phone name 1
Phone name 2
▼
▼

폰 연결 해제
삭제
연결 순서 변경
From the paired phone list, select the
currently connected device and press the
[Disconnect] button.

폰 연결
삭제
연결 순서 변경
From the paired phone list, select the
device you want to delete and press the
[Delete] button.
12:05
트랙 01
▲
12:05
트랙 01
Phone name 연결 해제되었습니다.
Phone 삭제되었습니다.
확인
확인
• When deleting the currently connected
device, the device will automatically be
disconnected to proceed with the deleting
process.
• If a paired Bluetooth® device is deleted,
the device’s call history and contacts data
will also be deleted.
• To re-use a deleted device, you must
pair the device again.
3 Bluetooth®
Information
Using Bluetooth®
Phone Menu Screen
Phone Menus
With a Bluetooth® device connected,
press the [PHONE] to display the Phone
menu screen.
12:05
Phone
번호로
전화걸기
최근통화목록
전화번호부
• If you press the [Call History] button but
there is no call history data, a prompt is
displayed which asks whether to
download call history data.
• If you press the [Contacts] button but
there is no contacts data, a prompt is
displayed which asks whether to
download contacts data. .
• This feature may not be supported in
some mobile phones. For more
information on download support, refer to
your mobile phone user’s manual.
Calling by Dialing a Number
Press the [PHONE] key ▶ Select [Dial
Number]
01234567890
Name
1. Dial
Number
닫기
Description
Displays the dial screen
where numbers can be
dialed to make calls
2. Call
History
Displays the call history
screen
3. Contacts
Displays the contacts list
screen
4. Setup
Displays Phone related
settings
Name
폰 설정
12:05
Phone
Description
1. Dial Pad
Used to enter phone number
2. 
• If a number has been entered,
calls the number.
•If no number has been
entered, switches to call
history screen.
3. 
Deletes the entered phone
number
4. Delete
Deletes entered numbers one
digit at a time.
3 Bluetooth®
Answering Calls
Answering a Call
Information
Answering a call with a Bluetooth® device
connected will display the following
screen.
• When the incoming call pop-up is
displayed, most AV and SETUP mode
features will not operate. Only the call
volume can be operated..
• The telephone number may not be
properly displayed in some mobile
phones..
• When a call is answered with the mobile
phone, the call mode will automatically
convert to Private mode.
12:05
Setup

전화가 왔습니다.
Name
1. Caller
Angelina Jolie
01012345678
통화
수신거부
Description
Displays the other part’s
name when the incoming
caller is saved within your
contacts
During a Handsfree Call
12:05
Phone
1  Scarlet Johanson
2  01234567890

3  00:59:59
Name
1. Caller
Description
Displays the other party’s name
if the incoming caller is saved
within your contacts
2. Incoming
Number
Displays the incoming number
3. Call time
Displays the call time
2. Incoming
Number
Displays the incoming
number
4. 
Ends call
3. Accept
Accept the incoming call
5. Private
Converts to Private mode
4. Reject
Reject the incoming call
6. Out Vol.
Sets cal volume as heard by the
other party
7. 
Turns Mic Mute On/Off
Information
• If the mic is muted, the other party will
not be able to hear your voice.
3 Bluetooth®
Information
Call History
Press the [PHONE] key ▶ Select [Call
History]
12:05
Phone
최근통화목록
 01234567890
▲
 Scarlet Johanson
▼
? Angelina Jolie

다운로드
A list of incoming, outgoing and missed
calls is displayed.
Press the [Download] button to download
the call history.
• The call history list will display up to 30
outgoing, incoming, and missed calls.
• Upon downloading call histories,
previously saved histories are deleted.
• Incoming calls with hidden caller IDs will
not be saved in the call history list.
• Previously saved contacts are stored
even if a device is disconnected and reconnected.
• The download feature may not be
supported in some mobile phones. Check
to see that the Bluetooth® device
supports the download feature.
Contacts
Press the [PHONE] key ▶ Select [Contacts]
12:05
Phone
Name 1
Description
1. Call History
Displays recent calls (call
history)
Connects call upon
selection
2. Download
Download Recent Call
History
▲
Name 2
▼
Name 3

다운로드 2
The list of saved contacts is displayed.
Press the [Download] button to download
the call history.
Name
Name
1/3
전화번호부
Description
1. Contact
List
Displays downloaded
contacts
Connects call upon
selection
2. Download
Download Contacts
3 Bluetooth®
Information
• Up to 1,000 contacts can be copied
into car contacts.
• Upon downloading contacts, previously
saved contacts will be deleted.
• Downloading is not possible if the
contacts download feature is turned off
within the Bluetooth® device. Also, some
devices may require device authorization
upon attempting to download. If
downloading cannot be normally
conducted, check the Bluetooth® device
setting or the screen state.
• Caller ID information will not be
displayed for unsaved contacts.
• The download feature may not be
supported in some mobile phones.
Check to see that the Bluetooth® device
supports the download feature.
• To learn more about supported devices
and compatibility, go to the Blu Members
website (blu.hyundai.com).
4
Voice
Recognition
 Before Using Voice Recognition
 Using Voice Recognition
 Command List
4 Voice Recognition
Before Using Voice Recognition
When using the voice recognition feature, only commands
listed within the user's manual are supported.
Phone related voice commands can be used only when a
Bluetooth® device is connected.
Be aware that during the operation of the voice recognition
system, pressing any key other than the [VR] key or
touching the screen will terminate voice recognition mode.
When making calls by stating a name, the corresponding
contact must be downloaded and stored within the audio
system.
For superior voice recognition performance, position the
microphone used for voice recognition above the head of
the driver’s seat and maintain a proper position when
saying commands.
After downloading the Bluetooth® contacts, it takes some
times to convert the contacts into voice information. During
this time, voice recognition may not properly operate.
Within the following situations, voice recognition may not
function properly due to external sound.
• When the windows and sunroof are open
• When the wind of the cooling / heating device is strong
• When entering and passing through tunnels
• When driving on rugged and uneven roads
• During severe rain (heavy rains, windstorms)
Pronounce the voice commands naturally and clearly as if
in a normal conversation.
4 Voice Recognition
Using Voice Recognition
Starting Voice Recognition
Starting Voice Recognition
Shortly press the [VR] key on the steering
remote controller ▶Say a command
Information
• If voice recognition is in [Expert Mode],
then the system will only say a “Beep~”
• To change the Normal Mode/Expert
Mode setting, go to [SETUP] ▶ [System]
▶ [Prompt Feedback].
Caution
• For proper recognition, say the
command after the voice instruction and
beep tone.
이미지
Skipping Prompt Messages
While prompt message is being stated▶
Shortly press the [VR] key on the steering
remote controller (under 0.8 seconds)
The prompt message is immediately
ended and the beep tone will sound. After
the “beep”, say the voice command.
이미지
If voice recognition is in [Normal Mode],
then the system will say “Please say a
command. Beep~”
Re-starting Voice Recognition
While system waits for a command ▶
Shortly press the [VR] key on the steering
remote controller (under 0.8 seconds)
The command wait state is immediately
ended and the beep ton will sound. After
the “beep”, say the voice command.
4 Voice Recognition
Ending Voice Recognition
While Voice Recognition is operating ▶
Press and hold the [VR] key on the
steering remote controller (over 0.8
seconds)
Information
• While using voice command, pressing a
steering wheel remote control or a
different key will end voice command.
▪ In a state where the system is waiting for a
voice command, say “cancel” or “end” to end
voice command.
▪ In a state where the system is waiting for
a voice command, press and hold the
[VR] key on the steering remote controller
to end voice command.
Illustration on Using Voice Recognition
Starting Voice Recognition
Ending Voice Recognition
Please say a command
Please say a command
DING~
DING~
Phonebook
More Help
You can say Radio, FM, AM, Media, CD,
USB, Aux, My Music, iPod, Bluetooth®
Audio, Phone, Call History or Phone book.
Please say a command.
Phone book.
Please say the name of the phone book
you want to call.
DING~
Cancel
Di-Ding~ (Cancel Sound)
Skipping Prompts
Please.....
DING~
More Help
You can say Radio, FM, AM, Media, CD, USB,
Aux, My Music, iPod, Bluetooth® Audio,
Phone, Call History or Phone book. Please
say a command.
4 Voice Recognition
Voice Command List
•Common Commands: These are commands that can be used in all situation. (However, some commands may not be supported
in special circumstances.)
Command
Function
More Help
Provides guidance on commands that can
be used anywhere in the system.
Help
Provides guidance on commands that can
be used within the current mode.
Call
Calls  saved in phone book
Ex) Call “John”
Phone
Provides guidance on Phone related
commands. After saying this command, say
“Call History”, “Phone book”, “Dial Number”
to execute corresponding functions.
Call History
Displays the Call History screen.
Phone book
Displays the phone book screen. After
saying this command, say the name of a
phone book saved in the phone book to
automatically connect the call
Dial Number
Displays the Dial number screen. After
saying this command, you can say the
number what you want to call.
Redial
Connects the most recently called number.
Radio
•When listening to the radio, displays the
next radio screen. (FM1→FM2→ FMA→
AM →AMA)
•When listening to a different mode,
displays the most recently played radio
screen.
Command
Function
FM
∙ When currently listening to the FM radio,
maintains the current state.
∙ When listening to a different mode,
displays the most recently played FM
screen
FM1(FM One)
Displays the FM1 screen.
FM2(FM Two)
Displays the FM2 screen.
FMA
Displays the FMA screen.
AM
Displays the AM screen.
AMA
Displays the AMA screen.
FM Preset 1~6
Play the most recently played broadcast
saved in FM Preset 1~6.
AM Preset 1~6
Plays the broadcast saved in AM Preset
1~6.
FM 87.5~107.9
Plays the FM broadcast of the
corresponding frequency.
AM 530~1710
Plays the AM broadcast of the
corresponding frequency.
TA on
Enable Traffic Announcement
TA off
Disable Traffic Announcement
News on
Enable RDS News feature
News off
Disable RDS News feature
55
4 Voice Recognition
Command
Function
Media
Moves to the most recently played media
screen.
Play Track 1~30
If a music CD has been inserted, plays the
corresponding track.
CD
Plays the music saved in the CD.
Search CD
Moves to the CD track or file selection screen.
∙ For audio CDs, move to the screen and say
the track number to play the corresponding
track.
∙ Moves to MP3 CD file selection screen. After
manually operate the device to select and play
music.
USB
Plays USB music.
Search USB
Moves to USB file selection screen. After
manually operate the device to select and play
music
iPod
Plays iPod music.
Search iPod
Moves to the iPod file selection screen. After
manually operate the device to select and play
music.
My Music
Plays the music saved in My Music.
Search My Music
Moves to My Music file selection screen. After
manually operate the device to select and play
music.
Command
Function
AUX (Auxiliary)
Plays the connected external device
Bluetooth®
Audio
Plays the music saved in connected Bluetooth®
Wireless Technology device.
Mute
Mutes the radio or music volume.
Pardon?
Repeats the most recent comment.
Cancel (Exit)
Ends voice command.
56
4 Voice Recognition
· FM/AM radio commands: Commands that can be used
· Audio CD commands: Commands that can be used
while listening to FM, AM radio.
whiled listening to Audio CD.
Command
Function
Command
Function
Preset 1~6
Plays the broadcast saved in Preset 1~6.
Region off
Disable Region feature
Auto Store
Automatically selects radio broadcast
frequencies with superior reception and saves
in Presets 1~6
Program Type
Save Preset 1~6
Saves the current broadcast frequency to
Preset 1~6
Moves to the RDS Program type selection screen.
After, manually operate the device o select a
desired program type.
Random
Randomly plays the tracks within the CD.
Seek up
Plays the next receivable broadcast.
Random Off
Seek down
Plays the previous receivable broadcast
Cancels random play to play tracks in sequential
order.
Next Preset
Selects the preset number next to the most
recently selected preset. (Example : When
currently listening to preset no.3, then preset
no.4 will be selected.)
Repeat
Repeats the current track.
Repeat Off
Cancels repeat play to play tracks in sequential
order
Previous Preset
Selects the preset number previous to the
most recently selected preset.
(Example :When currently listening to preset
no.3, then preset no.2 will be selected.)
Next Track
Plays the next track
Previous Track
Plays the previous track.
Scan
Scans the tracks from the next track for 10
seconds each.
Track 1~30
Plays the desired track number.
Scan
Scans receivable frequencies from the current
broadcast and plays for 10 seconds each.
Preset Scan
Moves to the next preset from the current
preset and plays for 10 seconds each.
Search Tracks
Moves to the track selection screen. After, say the
track name to play the corresponding track
AF on
Enable alternative Frequency feature
Information
AF off
Disable Alternative Frequency feature
Displays the information screen of the current
tracks..
Region
Enable Region feature.
Play
Plays the currently paused song.
Pause
Pauses the current song.
57
4 Voice Recognition
·MP3 CD / USB commands : Commands that can be
iPod Commands: Commands that can be use while
used while listening to music files saved in CD and USB
playing iPod
Command
Function
Random
Randomly plays the files within the current
folder.
All Random
Randomly plays all saved files.
Random Off
Cancels random play to play files in sequential
order.
Repeat
Repeats the current file.
Folder Repeat
Repeats all files in the current folder.
Repeat Off
Cancels repeat play to play files in sequential
order
Next file
Plays the next file.
Previous File
Plays the previous file.
Scan
Scans the files from the next files for
10 seconds each.
Search Files
Moves to the file selection screen .
Search Folders
Moves to the folder selection screen.
Information
Displays the information screen of the current
file.
Copy
Copies the current file in My Music.
Play
Plays the currently paused song.
Pause
Pauses the current song.
Command
Function
All Random
Randomly plays all saved songs.
Random
Randomly plays the songs within the current
category.
Random off
Cancels random play to play songs in
sequential order.
Repeat
Repeats the current song
Repeat Off
Cancels repeat play to play songs in sequential
order.
Next Song
Plays the next song.
Previous Song
Plays the previous song.
Search song
Moves to the song selection screen.
Play
Plays the currently paused song.
Pause
Pauses the current song.
58
4 Voice Recognition
·My Music Commands: Commands that can be used
·Bluetooth® Wireless Technology Audio Commands:
while playing My Music
Commands that can be used while playing Phone Music.
Command
Function
Command
Function
Random
Randomly plays all saved files.
Play
Plays the currently paused song.
Random Off
Cancels random play to play files in sequential
order.
Pause
Pauses the current song.
Repeat
Repeats the current file.
Repeat Off
Cancels repeat play to play files in sequential
order.
Next File
Plays the next file.
Previous File
Plays the previous file.
Scan
Scans the files from the next files for 10
seconds each.
Search Files
Moves to the file selection screen.
Information
Displays the information screen of the current
file.
Delete
Deletes the current file. You will bypass an
additional confirmation process.
Delete All
Deletes all files saved in My Music. You will
bypass and additional confirmation process.
5
Setup
 Setup
 Using Setup
5 Setup
Setup
Basic Mode Screen
No.
Name
Description
Display
Sets display related settings
Sound
Sets sound related settings
Clock
/Day
Sets clock/date related settings
Phone
Sets phone related settings
System
Sets system related settings
EU_Setup
5 Setup
Using Setup
Starting Mode
Press the [SETUP] key to display the
Setup screen.
Display Settings
Pop-up Mode
Adjusting the Brightness
Press the [SETUP] key ▶ Select [Display]
▶ Select [Pop-up Mode]
Press the [SETUP] key ▶ Select [Display]
▶ Select [Brightness]
EU_Setup_0
EU_Setup
You can select and control options related
to [Display], [Sound], [Clock/Day], [Phone]
and [System].
Use the [◀], [▶] buttons to adjust the
screen brightness or set the Brightness on
Automatic, Day, or Night mode.
Information
Press the [Default] button to reset.
• Once settings have been changed, press
the [] key to return to the previous menu.
Name
Description
1. Automatic
Adjusts the brightness
automatically
2. Day
Always maintains the
brightness on max
3. Night
Always maintains the
brightness on min
EU_Setup_0
This feature is used to display the Pop-up
Mode screen when entering radio and
media modes.
When this feature is turned on, pressing
the [RADIO] or [MEDIA] key will display
the Pop-up Mode screen.
Information
• The media Pop-up Mode screen can be
displayed only when two or more media
modes have been connected.
5 Setup
Text Scroll
MP3 Information Display
Press the [SETUP] key ▶ Select [Display]
▶ Select [Scroll text]
Press the [SETUP] key ▶ Select [Display]
▶ Select [Song Info]
EU_Setup_0
This feature is used to scroll text
displayed on the screen when it is too
long to be displayed at once.
When turned on, the text is repeatedly
scrolled. When turned off, the text is
scrolled just once.
EU_Setup_0
This feature is used to change the
information displayed within USB and
MP3 CD modes.
Name
Description
1. Folder File
Displays file name and
folder name
2. Album
Artist
Song
Displays album
name/artist name/song
5 Setup
Sound Settings
SDVC (Speed Dependent Volume Control)
Virtual Sound
Press the [SETUP] key ▶ Select [Sound]
▶ Select [Virtual Sound]
Sound Settings
Press the [SETUP] key ▶ Select [Sound]
▶ Select [Sound Setting]
EU_Setup_0
Press the [SETUP] key ▶ Select [Sound]
▶ Select [Speed Dependent Vol]
EU_Setup_0
EU_Setup_0
EU_Setup_0
This feature is used to set the Power
Treble and Surround sound options.
The volume level is controlled
automatically according to the vehicle
speed.
Variable EQ
SDVC can be set by selecting from
Off/Low/Mid/High.
12:05
Setup
Sound>Variable EQ
Natural sound optimized
for front seats
Use the [▲],[▼],[◀],[▶] buttons to adjust the
Fader/Balance settings.
Use the [◀],[▶] buttons to adjust the
Bass/Middle/Treble settings.
Press the [Default] button to reset.
Normal
Dynamic
Concert

This is a premium sound feature in which
the acoustical mode can be selected
according to musical preferences.
❈ May differ depending on the selected
audio.
5 Setup
Clock/Date Setting
Voice Recognition Setting
Press the [SETUP] key ▶ Select [Sound]
▶ Select [Volume Dialog]
EU_Setup_1
Clock Setting
Calendar Setting
Press the [SETUP] key ▶ Select
[Clock/Day] ▶ Select [Clock Settings]
Press the [SETUP] key ▶ Select [Clock/Day]
▶ Select [Calendar Settings]
EU_Setup_1
Use the [-],[+] buttons to adjust the
Volume Dialog volume.
Use the [▲],[▼] buttons to set the Hour,
Minutes and AM/PM setting.
Touch Screen Beep
EU_Setup_1
Use the [▲],[▼] buttons to set the Month,
Day, and Year setting.
Information
Press the [SETUP] key ▶ Select [Sound]
▶ Select [Touch Screen Beep]
EU_Setup_1
This feature is used to turn the touch
screen beep on/off.
• Press and hold the [CLOCK[ key (over
0.8 seconds) to display the Clock/Day
screen.
5 Setup
Clock/Date Setting
Time Format
Clock Display
Press the [SETUP] key ▶ Select
[Clock/Day] ▶Select [Time Format]
EU_Setup_Clock_0
This feature is used to change the clock
format between 12hr or 24hr.
Automatic RDS Time
Press the [SETUP] key ▶ Select
[Clock/Day] ▶ Select [Clock Display
(Power off)]
EU_Setup_Clock_0
This feature is used to display a clock on
the screen when the audio system is
turned off.
Press the [SETUP] key ▶ Select
[Clock/Day] ▶ Select [Automatic RDS
Time]
EU_Setup_Clock_0
This feature is used to set time
automatically by synchronizing with RDS.
5 Setup
Bluetooth® Setting
Viewing Paired Phone List
Downloading Contacts
Before Downloading Contacts
Pairing a New Device
Press the [SETUP] key ▶ Select [Phone]
▶ Select [Paired Phone List]
Press the [SETUP] key ▶ Select [Phone]
▶ Select [Pair Phone]
Setup
폰>등록 폰 목록
Phone name 1
12:05
Setup
12:05
▲
Phone name 2
▼
트랙 01
블루투스 폰에서 기기이름을
검색 후 등록하여 주십시오.
확인
Bluetooth® devices can be paired with the
audio system.
For more information, refer to the “Pairing
through Phone Setup” section within Part
3 Bluetooth®.

폰 연결
삭제
연결 순서 변경
This feature is used to view mobile
phones that have been paired with the
audio system. Upon selecting a paired
phone, the setup menu is displayed.
For more information, refer to the “Setting
Bluetooth® Connection” section within
Part 3 Bluetooth®.
• Only contacts within connected phones can
be downloaded. Also check to see that your
mobile phone supports the download feature.
• To learn more about whether your mobile
phone supports contacts downloads, refer to
your mobile phone user’s manual.
• Contacts for only the connected phone can
be downloaded. Before downloading, check to
see whether your phone supports the
download feature.
Press the [SETUP] key ▶ Select [Phone]
▶Select [Contacts Download]
12:05
Setup
폰>다운로드
트랙 01
다운로드중
전화번호부
(최대 : 1000개)
중지
Name
Description
1. 
Moves to the previous
screen
2. Connect
Connect/disconnects
currently selected phone
3. Delete
Deletes the currently
selected phone
4. Change
Priority
Sets currently selected
phone to highest connection
priority
Contacts are downloaded from the mobile
phone and the download progress is
displayed.
Information
• Up to 1,000 contacts can be copied into car
contacts.
* Up to 1,000 contacts can be saved for each
paired device.
* Upon downloading contacts, previously saved
contacts will be deleted. However, contacts
saved to other paired phones are not deleted.
5 Setup
Setup
Auto Download (Contacts)
Audio Streaming
Press the [SETUP] key ▶ Select [Phone]
▶ Select [Auto Download]
Press the [SETUP] key ▶ Select [Phone]
▶ Select [Audio Streaming]
Setup
폰
전화번호부 자동 다운로드
블루투스 오디오 스트리밍
마이크 음량 설정
12:05
2/3


▶
▲
▼

This feature is used to automatically
download mobile phone contacts once a
Bluetooth® phone is connected.
Setup
폰
12:05
전화번호부 자동 다운로드


블루투스 오디오 스트리밍
마이크 음량 설정
2/3
▶
▲
▼
12:05
[SETUP] 키를 누른 후 ▶ [화면] 선택 ▶
폰>마이크 음량 설정
[밝기조정] 선택
ㅣ ㅣ ㅣ ㅣ ㅣ

Use the [-],[+] buttons to adjust the
outgoing volume level

When Audio Streaming is turned on, you
can play music files saved in your
Bluetooth® device from the car.
Turning Bluetooth® System Off
Press the [SETUP] key ▶ Select [Phone]
▶ Select [Bluetooth® System Off]
12:05
Information
• The Auto Download feature will
download mobile phone contacts every
time the phone is connected. The
download time may differ depending on
the number of saved contacts and the
communication state.
Caution
• Bluetooth® audio streaming may not be
supported in some Bluetooth® phones.
트랙 01
블루투스 기능 사용을 해제하시겠습니까?
Yes
No
Outgoing Volume
Press the [SETUP] key ▶ Select [Phone]
▶ Select [Outgoing Volume]
Once Bluetooth® is turned off, Bluetooth®
related features will not be supported
within the audio system.
Information
• To turn Bluetooth® back on, go to
[SETUP] ▶ [Phone] and press “Yes”.
5 Setup
System Setting
Memory Information
[Press the [SETUP] key ▶ Select
[System] ▶ Select [Memory Information]
Voice Recognition Mode Setting
Language
Press the [SETUP] key ▶ Select [System]
▶ Select [Voice Recognition System]
Press the [SETUP] key ▶ Select [System]
▶ Select [Language]
Setup_15
EU_Setup_1
This feature displays information related
to system memory.
Name
1. Using
2. Capacity
Description
Displays capacity currently in
use
Displays total capacity
EU_Setup_Lang
This feature is used to select the desired
prompt feedback option from Normal and
Expert.
Name
Description
1. Normal
When using voice recognition,
provides detailed guidance
prompts
2. Expert
When using voice recognition,
omits some guidance prompts
This feature is used to change the system
and voice recognition language.
If the language is changed, the system will
restart and apply the selected language.
FCC Information to Users
FCC Part 15.19 Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
RF Exposure Statement (MPE)
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is
maintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other
antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Jon
Create Date                     : 2012:03:19 16:40:22+09:00
Modify Date                     : 2015:11:18 16:17:25+09:00
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PowerPoint용 Acrobat PDFMaker 9.1
Metadata Date                   : 2015:11:18 16:17:25+09:00
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Format                          : application/pdf
Creator                         : Jon
Title                           : 슬라이드 1
Document ID                     : uuid:5f1b773b-8790-423b-8c86-6560ab6ec6b5
Instance ID                     : uuid:1905cbe3-a274-4436-9cff-c0268c05546c
Page Layout                     : SinglePage
Page Count                      : 61

EXIF Metadata provided by EXIF.tools