HYUNDAI MOBIS ADBA0J5AN Car Audio System User Manual

HYUNDAI MOBIS CO., LTD. Car Audio System Users Manual

Users Manual

Download: HYUNDAI MOBIS ADBA0J5AN Car Audio System User Manual
Mirror Download [FCC.gov]HYUNDAI MOBIS ADBA0J5AN Car Audio System User Manual
Document ID3244311
Application ID8FnWOpROvVvwkHW7LlpMQQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize116.72kB (1458991 bits)
Date Submitted2016-12-30 00:00:00
Date Available2017-06-25 00:00:00
Creation Date2016-11-18 15:36:07
Producing SoftwareAcrobat Distiller 10.1.1 (Windows)
Document Lastmod2016-12-29 16:20:12
Document TitleUsers Manual
Document CreatorPScript5.dll Version 5.2.2
Document Author: FEEL-6

CAR MULTIMEDIA SYSTEM
USER'S MANUAL
2016-11-18 오후 3:27:4
Read the following safety precautions
for your safety
Before using the product, read the contents of this user's manual
carefully and use this product safely.
Notations used within this User's Manual
WARNING
• Failure to observe the instructions within this category could result in death
or serious injury or damage to the vehicle.
CAUTION
※ The design and specifications of this product may change without prior
• Information on matters that could potentially lead to injury or vehicle
damage/malfunction Information that could lead to higher user safety
notification for product and service improvement.
The actual features in the vehicle may differ from the illustrations.
For more accurate information about the vehicle, please refer to the
catalogue.
i Information
• Information and tips that provide additional user convenience in using the
product
※ This Audio system contains open source software, including without
limitation, software distributed and/or modified under the GNU General
Public license, Version 2, June 1991, and the GNU lesser General
Public License, Version 2.1, February 1999.
For additional information and to obtain related materials including
without limitation, the previous referred to licenses and software, please
NOTICE
• Information on specific features that facilitate proper product use and
functional understanding
• Information on terminology used within this manual
contact us at MOBIS_OSSrequest@mobis.co.kr
K_SC 17_DAUD2[MEX_EG]AV_PART0.indd 1
2016-11-18 오후 3:28:1
iPod
®
iPod® is a registered trademark of Apple Inc.
®
Bluetooth Wireless Technology
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Kia is under license.
Other trademarks and trade names are those of their respective owners.
A Bluetooth® Wireless Technology enabled cell phone is required to use
Bluetooth® Wireless Technology.
K_SC 17_DAUD2[MEX_EG]AV_PART0.indd 4
2016-11-18 오후 3:28:1
part.1
Basic
Warnings and Cautions
Key Product Features
Component Names and Functions
Starting the System for the First Time
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-1
2016-11-18 오후 3:28:2
Basic
Safety Warnings
• Please refrain from use if the screen
• Some functions other than the one
is blank or no sound can be heard as
mentioned above cannot be used while
• Do not stare at the screen while driving.
these signs may indicate product mal-
driving. These functions operate only
Staring at the screen for prolonged peri-
function. Continued use in such con-
when the vehicle is parked.
ods of time could lead to traffic accidents.
ditions could lead to accidents (fires,
• Do not disassemble, assemble, or modify
the Multimedia system. Such acts could
result in accidents, fire, or electric shock.
• Heed caution not to spill water or intro-
electric shock) or product malfunctions.
• Do not touch the antenna during thunder or lightening as such acts may lead
to lightning induced electric shock.
duce foreign objects into the device.
• Do not stop or park in parking-restricted
Such acts could lead to smoke, fire, or
areas to operate the product. Such acts
product malfunction.
could lead to traffic accidents.
• If you use phone related functions while
• For most Audio and multimedia modes,
driving, you will find it difficult to concen-
the display will not operate when the
trate on operating the vehicle and the
vehicle is in motion. For your safety, first
current traffic conditions, so the possibility
park the vehicle to watch or view the
of an accident may increase. Please
screen. (The screen will only operate
use phone related functions only when
when the parking brake is ON for man-
parked.
ual transmission vehicles and when the
parking brake is ON or the gearshift is in
the P (PARK) position for automatic.)
1-2 I Basic
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-2
2016-11-18 오후 3:28:2
Safety Cautions
• Pay attention to the volume setting when
• Do not subject the device to severe
turning the device on. A sudden output
shock or impact. Direct pressure onto
Pay attention to traffic conditions while
of extreme volume upon turning the
the front side of the monitor may cause
driving.
device on could lead to hearing impair-
damage to the LCD or touch screen.
• Operating the device while driving could
ment. (Adjust the volume to a suitable
• When cleaning the device, make sure
lead to accidents due to a lack of atten-
levels before turning off the device.)
to turn off the device and use a dry and
tion to external surroundings. First park
• If you want to change the position of
smooth cloth. Never use tough materi-
the vehicle before operating the device.
device installation, please inquire with
als, chemical cloths, or solvents(alcohol,
In addition, the touch screen may not
your place of purchase or service main-
benzene, thinners, etc.) as such mate-
work for some functions when the vehi-
tenance center. Technical expertise is
rials may damage the device panel or
cle is in motion. The touch screen fea-
required to install or disassemble the
cause color/quality deterioration. When
ture will be supported once the vehicle
device.
experiencing product concerns, inquire
has stopped.
• Turn on the car ignition before using this
with your place of purchase or service
• Adjust the volume to levels that allow
device. Do not operate the Multimedia
the driver to hear sounds from outside
system for long periods of time with the
• Prevent caustic solutions such as per-
of the vehicle. Driving in a state where
ignition turned off as such operations
fume and cosmetic oil from contacting
external sounds cannot be heard may
may lead to battery discharge.
the dashboard because they may cause
lead to accidents.
• Upon using the Multimedia system
maintenance center.
damage or discoloration.
for more than 10 minutes with the car
engine turned off, the following warning
01
will be displayed. After 10 minutes, the
warning will be displayed for 5 seconds
every 1 minute.
Warnings and Cautions I 1-3
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-3
2016-11-18 오후 3:28:2
Key Product Features
This device is a Multimedia system equipped with a multifunctional player that supports Radio (FM, AM), USB, iPod, AUX and
Bluetooth Audio features. The WIDE VGA LCD provides a high
quality resolution while the powerful and rich sound system adds
to the driving enjoyment.
Display
Wide TFT-LCD Display
• Provides high quality video through a Wide TFTLCD Display using an LED Back Light.
• Touch screen for maximum user convenience.
Radio
Digital Tuner Feature
• Digital Tuner using PLL method that supports
memory of 40 broadcast stations.
Radio broadcast station name
• Displays broadcast station names.
Multimedia
Player
Support for various Media Formats
• Support for various media formats, including
®
Radio, USB, iPod, AUX and Bluetooth Audio
Streaming modes.
Miscellaneous
Bluetooth® Wireless Technology
• Convenient use of Bluetooth® Handsfree by
using buttons within the steering wheel control
Digital Screen Control Features
• Easy control of features through touch screen
options
Steering Wheel Control
®
• Control over audio features, Bluetooth through
the steering wheel control for maximum convenience.
1-4 I Basic
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-4
2016-11-18 오후 3:28:2
Component Names and Functions
Name
Name
RADIO
HOME
Displays the HOME screen.
PHONE
Displays the Bluetooth phone mode.
Description
Converts to FM/AM mode
• Each time the key is pressed, the mode is
changed in the following order: FM1 → FM2 →
AM → FM1.
MEDIA
Moves to MEDIA mode.
• If the media is not connected MEDIA mode will
not be activated.
SEEK
TRACK
When the key is pressed shortly (for less than 0.8
seconds),
• FM/AM mode: Plays the previous/next frequency.
• MEDIA (USB/iPod) mode: Changes the track,
file or title (except for AUX).
When the key is pressed and held down (for over
0.8 seconds),
• FM/AM mode: Continuously changes the frequency until the key is released.
• MEDIA (USB/iPod) mode: Rewinds or fast
forwards the track or file (except for Bluetooth
Audio, and AUX).
POWER/
VOL
• When power is off, press to turn power on.
• When power is on, press and hold for over 0.8
seconds to turn the power off.
• When power is on, press shortly for less than 0.8
seconds to turn Audio off.
• Turn left/right to adjust the volume.
Displays the function set by the user.
SETUP
TUNE
RESET
Moves to the Setup screen.
• FM/AM mode: Changes the frequency.
• MEDIA (USB/iPod) mode: Changes the track,
file or title (except for Bluetooth Audio, and
AUX).
Resets the system settings. (Preset radio channels
and other data will not be deleted)
※ The actual feature in the vehicle may differ from the illustration.
01
Head Unit
Description
Component Names and Functions I 1-5
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-5
2016-11-18 오후 3:28:2
Steering Wheel Control
Name
Name
Description
For more details, refer to Phone Projection guide.
MODE
VOL +
VOL -
• Each time this key is pressed, mode is changed
in the following order: FM1 → FM2 → AM → USB
or iPod → AUX → Bluetooth Audio → FM1
• If the media is not connected, the corresponding
modes will be disabled
• Press and hold the key (more than 0.8 seconds)
to turn the Audio system on/off
• When power is off, press the key to turn power
back on
Controls the volume
When pressed quickly. (less than 0.8 seconds)
• When pressed in the dial screen, makes a call
• When pressed in the incoming call screen,
answers the call
• When pressed during call waiting, switches to
waiting call (Call Waiting)
When pressed and held. (more than 0.8 seconds)
• When pressed in Bluetooth® Hands-free, redials
the last dialed call
• When pressed during a Bluetooth® Hands-free
call, switches call back to mobile phone (Private)
• When pressed while calling on the mobile phone,
switches call back to Bluetooth ® Hands-free
(operates only when Bluetooth® Hands-free is
connected)
• When pressed during a call, ends the phone call
• When pressed in the incoming call screen, rejects
the call
※ The actual feature in the vehicle may differ from the illustration.
01
When keys are pressed quickly. (less than 0.8 seconds)
• FM/AM mode: searches broadcast frequencies
saved to Presets
• Media (USB/iPod) mode: changes the track, file
or title (except for AUX)
When keys are pressed and held. (more than 0.8
seconds)
• FM/AM mode: automatically searches broadcast
frequencies
• Media (USB/iPod) mode: quickly looks up songs
(excluding AUX and Bluetooth audio files)
Description
Component Names and Functions I 1-7
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-7
2016-11-18 오후 3:28:4
Starting the System for
the First Time
Turning the System On/Off
NOTICE
• Cannot operate the system while it is
booting up. It may take some time for all of
features of the system.
Press the engine start button or set the
Pressing and holding the power key on the
ignition key to On or ACC. Each time you
head unit will turn off the system.
turn on the system, a boot logo and safety
You can change Screen Saver Settings
warning will appear.
in Setup to display a clock on the Screen
System Reset
The System Reset function restores the
system when it is not operating correctly.
Press and hold the RESET key for a second or longer. (It is recommended that you
press the RESET key using a tool, such as
a pin or a clip.)
Saver.
i Information
• If you turn off the system during a phone
call using the Hands-free feature, then the
call will automatically switch to your mobile
phone.
Pressing the power key on the head unit
will display the safety guide. To change the
system language select the Language
01
button.
NOTICE
• Check the volume when turning on the
system. Before turning on the system, adjust
the volume to a reasonable level.
Starting the System for the First Time I 1-9
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-9
2016-11-18 오후 3:29:4
Battery Warning Message
Always use the system while the car
Restrictions on Features for
Safety Measures
engine is running. If you turn on the sys-
Several features are limited while driving.
tem while the engine is off, a battery warn-
The restriction screen will disappear when
ing message will appear. When the engine
shifting gears into P or putting the parking
starts, the message will disappear.
brake on.
NOTICE
• If you use the system for a long time with
the engine off, the battery may become
completely discharged.
1-10 I Basic
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-10
2016-11-18 오후 3:29:4
Home Screen
Information Display on the Status Bar
Controls Menu Configuration for the Home Screen
Displays the date and time, along with the system status shown by
Tap the
the various icons to the right of the clock.
icon on any screen to display the Home Screen below.
The icons in the following table indicate the various types of system status details and events.
Icon
Description
Displayed when the audio is muted.
Displays the remaining battery of the Bluetooth phone.
Displayed when connected to Bluetooth for handsfree.
Displayed when connected to Bluetooth for streaming audio.
Displayed when connected to Bluetooth for streaming audio and handsfree.
Displayed when downloading contacts or recent calls from the Bluetooth phone.
Description
• Shows brief information on the radio or media
that is now playing.
Radio/
• Tap the area to move to the mode that you are
Media Widget
listening to.
• Shows call-related information during a phone
call.
Connectivity
Widget
Shows any connected devices such as iPod and
Bluetooth.
All Menus
Shows all of the items in the system menu.
My Menu
Add your favorite menus to have quick and easy
access to them.
Apps/Info
Moves to the Apps/Info screen.
Setup
Moves to the Setup screen.
Displayed while on a call with the Bluetooth phone.
Displayed when the microphone of the Bluetooth phone is muted.
Displays the signal strength of the Bluetooth phone.
01
Features
Starting the System for the First Time I 1-11
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-11
2016-11-18 오후 3:29:4
Adding a Feature to My Menu
Select
My Menu
on the Home Screen to
add the most frequently used menus,
On-Screen Touch Controls
Drag & Drop
Learn how to touch the screen to operate
Select a menu or item you want, then drag
the system.
and drop it to where you want to place it.
change the menu order, or delete menus.
Select
Tap lightly on a menu or an item to select it.
NOTICE
i Information
• Up to 24 menus can be added to My Menu.
• The system will not recognize your touch if
you wear a glove or other non-conductive
material. Touch the screen using your
finger, an electrostatic touch-screen glove,
or a stylus pen.
Drag or touch the slider along the play bar
in the music screens to jump to the point
that you want to play from.
1-12 I Basic
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-12
2016-11-18 오후 3:29:5
Flick (Quick Scrolling)
Press and Hold
Pressing the
and
buttons
in the music player will fast forward/rewind
the music.
Quickly moves up and down in the list.
NOTICE
01
• Moving the list when there are many items
will display a handler on the right of the
display. You can easily move many items at
a time with the handler.
Starting the System for the First Time I 1-13
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-13
2016-11-18 오후 3:29:5
Warning Statement
FCC Part 15.19 Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
RF Exposure Statement (MPE)
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is
maintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other antenna
or transmitter.
K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-14
2016-11-18 오후 3:29:5
part.2
Radio/Media
FM/AM
USB
iPod
AUX
Bluetooth® Audio
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-1
2016-11-18 오후 3:30:1
Radio/Media
FM/AM
You can access the radio player either by pressing the
Features
Displays the current operating mode.
Preset
Frequencies
• The stored preset frequencies are displayed
for user selection.
• After selecting frequency, press and hold
the preset button for over 0.8 seconds.
A beep sound will be heard and the frequency
is to be stored in the selected preset button.
• Flick the preset frequencies up/down to
scroll quickly through presets.
Frequency
Displays the current frequency.
Menu
• Sound Settings
Moves to the Sound Settings.
Back Button
Converts to basic mode screen.
Scan/
Preset Scan
Displays an active mode from Scan and
Preset Scan modes.
Scan
Shortly plays the broadcasts for the frequencies
with superior reception for 5 seconds per item.
Autostore
Saves frequencies with good reception to
Preset buttons.
While Autostore is operating, pressing the
Autostore button again will cancel the function and play the previous frequency.
RADIO
key or by selecting the Radio menu from All Menus on the Home
screen.
FM/AM Mode Display Controls
i Information
• If you press the RADIO key when the power is off, the power will turn
on and a radio broadcast will be tuned from the current mode.
Description
Mode Display
2-2 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-2
2016-11-18 오후 3:30:1
Features
Description
TUNE
TUNE knob to manually seek availTurn the
able frequencies.
• FM: Increment/decrement by 200 kHz
• AM: Increment/decrement by 10 kHz
02
SEEK/TRACK
• Pressing this button briefly (less than 0.8 seconds): Seeks the previous/next frequency.
• Pressing and holding this button (for more
than 0.8 seconds): Moves quickly through
all of the frequencies. The moment that you
release the button, the system seeks the next
available frequency.
FM/AM I 2-3
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-3
2016-11-18 오후 3:30:2
USB
• Some USB devices may not be supported due to compatibility
issues.
Before Playing a USB MP3
• Take caution so that the USB connector does not come in contact with body parts or objects.
Connect the USB device after turning on the engine. The USB
device may become damaged if it is already connected when the
• Repeated connecting/disconnecting of USB devices within short
periods of time may result in product malfunction.
ignition is turned on.
• Make sure to connect/disconnect external USB devices with the
• Files that are not standard format music/image files will not be
• The amount of time required to recognize the external USB
audio power turned off.
played.
• For MP3/WMA/OGG files, only music files with compression
rates between 8Kbps ~ 320Kbps can be played.
• Heed caution to static electricity when connecting/disconnecting
external USB devices.
• Encoded MP3 Players will not be recognized when connected
as an external device.
• When connecting an external USB device, the device may not
properly recognize the USB is in some states.
• Only products formatted with byte/sectors under 64Kbyte will be
recognized.
• USB devices, formatted to the FAT12, FAT16, or FAT32 file system, are recommended. File systems other than FAT12, FAT16,
FAT32, exFAT, and NTFS are not supported.
device may differ depending on the type, size, or file formats
stored on the USB.
• The use of USB devices for purposes other than playing music
and image files is prohibited.
• Do not use the USB I/F to charge batteries or USB accessories
that generate heat. Such acts may lead to worsened performance or damage to the device.
• The device may not recognize the USB device if separately
purchased USB hubs and extension cables are being used.
Connect the USB directly with the multimedia terminal of the
vehicle.
• When using mass storage USB devices with separate logical
drives, only files saved to the root drive can be played.
• When application programs are installed to specific USBs, files
may not properly play.
2-4 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-4
2016-11-18 오후 3:30:2
• The device may not operate normally if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB
devices not recognized as portable disk drives) are connected
Plug Type Connector
with the device.
• Charging through the USB may not work for some mobile
Product Name
devices.
• The device may not support normal operation when using a
USB memory type besides Metal Cover Type USB Memory.
• The device may not support normal operation when using formats such as HDD Type, CF, or SD Memory.
Manufacturer
XTICK
LG
BMK
BMK Technology
SKY-DRV
Sky Digital
TRANSCEND JetFlash
Transcend
• Upon playing iPods, please use a dedicated iPod car cable.
Sandisk Cruzer
SanDisk
• Normal operations cannot be guaranteed when other cables are
Micro ZyRUS
ZyRUS
NEXTIK
Digiworks
being used.
• The device will not support files locked by DRM. (Digital Rights
Management)
• USB memory sticks used by connecting an Adaptor (SD Type or
CF Type) may not be properly recognized.
i Information
• Problems that occur through use of USB devices not listed within the
above table are not covered by the product warranty.
• Only use Plug type connector products, as shown in the figure
below.
• To play USB MP3, the USB device must be connected to the
02
USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.
USB I 2-5
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-5
2016-11-18 오후 3:30:2
Supported USB MP3 music specifications
Name
MP3 File
Specification
Recommended
Bit Rates and
Sampling
Frequency
Description
Specification: MPEG1 AUDIO LAYER 3
Acceptable sampling frequency: 32, 44.1, 48 (kHz)
Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112,
128, 160, 192, 224, 256, 320 (Kbps)
96, 128, 192 Kbps fixed bit rate/44.1kHz
ID3 Tag
Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3,
ID3v2.4 ID3 tags
Detailed
Specifications
Maximum directory layers: 20 layers
Maximum length of folder name/file name: 255Bytes
Supported characters for folder name/file name:
Alphanumeric characters, Korean standard character set 2,350 characters, Simplified Chinese 4888
characters
Maximum number of folders which can be stored
onto one USB: 2000 folders (including ROOT)
Maximum number of files which can be stored onto
one USB: 8000
i Information
• The sound quality of MP3 files that use bitrates exceeding 192 Kbps
cannot be guaranteed. When using files without fixed bit rates, some
features (FF/REW features) may not properly operate.
2-6 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-6
2016-11-18 오후 3:30:3
Features
Features
Previous File
Play/Pause
Plays/pauses the current file
Next File
• If button is pressed (less than 0.8 seconds):
Moves to the next file
• If button is pressed (more than 0.8 seconds): It
fast-forwards the track
Repeat
Repeats the current file
• If select the song in the file tab on the list
screen: Select the Repeat button to switch
between repeating one song, repeating folder,
and turning repeat off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Repeat button to switch between repeating
one song and turning repeat off
Shuffle
Plays files in random order
• If select the song in the file tab on the list
screen: Select the Shuffle button to switch
between Shuffle Folder, Shuffle All, and turning
shuffle off
• If select the song in the other tabs (Playlist,
Artist, Song, Album) on the list screen: Select
the Shuffle button to switch between Shuffle
Category and turning shuffle off
Description
Mode
Displays current operating mode
File Index
Shows the current file/total files within the USB
Repeat/Shuffle
From Repeat/Shuffle, displays the current operating function
Play Time
Displays the current play time/total play time
Song Info
Displays the information of the current track
• When a track in the file tab on the list screen
is selected: Displays artist, title, album info
• When a track in the other tabs on the list
screen is selected: Displays artist, title, album
info
List
Moves to the list screen
Back Button
Converts to basic mode screen
Description
If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file
from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
previous file
• If play time is more than 3 seconds, play the
current file from the beginning
If button is pressed (more than 0.8 seconds): It
rewinds the track
02
USB Music Mode Display Controls
USB I 2-7
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-7
2016-11-18 오후 3:30:3
Features
Description
Menu
• Delete Current File: A selected file can be
deleted. Deleted file can be found in the to_
Delete folder.
This function is only suppored when USB format is compatable with FAT16 or FAT32.
• Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the
sound.
TUNE
TUNE knob to search a desired track.
Turn the
If the desired track is displayed, press the TUNE
knob to play the track.
TUNE knob
If you do not anything with the
for 5 seconds of searching tracks, the track
info for the current track is restored.
2-8 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-8
2016-11-18 오후 3:30:4
Features
Description
Displays folder/category name in the list
Current Song
Displays current playing file name
Back Button
Converts to basic mode screen
Upper Folder/
Category
Moves to Upper Folder
Menu
Now Playing: When moving to a different list
screen, moves to the list page where the current file is located (Becomes disabled when the
current list includes the current file)
Search Menu
Search tracks by the list type. Search songs
according to File, Artist, Song, Album and
Recently Added.
If access the search menu while playing a
track, it moves to the previous search mode.
SEEK/TRACK
• If button is pressed (less than 0.8 seconds):
Plays previous/next track.
• If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind
or fast-forward the track.
TUNE
Turn the
TUNE knob to move the focus to
the previous/next list. If the desired track is displayed, press TUNE knob to play the track.
02
Folder/ Category
Name
USB I 2-9
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-9
2016-11-18 오후 3:30:5
iPod
Using iPod Devices
• iPod is a registered trademark of Apple
Inc.
• iPod mode will not operate if the connected iPod cannot be recognized due
• If repeatedly connect and disconnect
• To listen to the iPod sound, reconnect
iPod/iPhone to the Multimedia system
the USB cable or change the audio out-
with USB cable in short time, it may
put settings in iPod/iPhone to Dock.
cause abnormal operation.
• In order to use the iPod while operating
• The time for recognition of iPod/iPhone
the keys, you must use a dedicated iPod
may vary depending on device type,
cable. (the cable that is supplied when
firmware version and iOS version.
purchasing iPod/ iPhone products)
to operation of unsupported versions
• For some iPod Touch and iPhone
※ During ACC ON state, connecting the
that do not support related protocols,
devices, connecting Bluetooth® while the
iPod through the iPod cable (The cable
iPod abnormalities, or iPod device
iPod is operating may result in discon-
that is supplied when purchasing iPod/
defects. Some iPods with unsupported
tinued iPod sound. When such devices
iPhone product.) will charge the iPod
®
communication protocols may not prop-
with Bluetooth support are connected,
erly operate with the Multimedia system.
this problem occurs as the sound source
through the head unit.
※ The use of genuine iPod cables sup-
• For fifth generation iPod Nano devices,
is changed from the Dock Connector
plied by Apple is recommended. (The
(USB connector cable) to Bluetooth.
use of other products may result in
the iPod may not be recognized when
Audio function in the Multimedia system
noise or abnormal operation.)
※ To play iPod music through cable con-
• Search/play orders shown within the
is limited if iPod/iPhone is connected
nection, the iPod/USB cable must be
iPod device may differ with the orders
to the system through both cable and
connected to the USB port in the front
the battery level is low. Please charge
the iPod for use.
• To prevent this symptom, Bluetooth
shown within the Multimedia system.
Bluetooth. To listen to the iPod sound,
multibox. The USB port in the center
• If the iPod malfunctions due to an iPod
use either iPod menu with USB connec-
console storage (if equipped) is for
device defect, reset the iPod and try
tion or Bluetooth Audio with Bluetooth
charging only.
again. (To learn more, refer to your iPod
connection.
manual)
2-10 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-10
2016-11-18 오후 3:30:5
• When connecting with the iPod cable,
• In Apple’s iOS 6.0 version or later,
make sure to fully insert the jack to pre-
Podcast and Audiobook media files are
vent communication interference. If the
designed to be played with the Podcasts
iPod is connected to the vehicle while it
and iBooks applications specifically
is playing, a high pitch tone may sound
designed for Apple products. If the Apple
for about 1~2 seconds immediately after
device does not provide the Podcast and
connection. If possible, connect the iPod
Audiobook lists, the playlist may not be
to the vehicle with the iPod stopped/
paused.
displayed and played in the iPod mode.
• If the Apple Podcasts and iBooks apps
• Within iPhones, streaming audio and
are not installed on the Apple device, but
iPod control may occasionally conflict.
the Apple device provides the Podcast
If problems persist, remove the iPhone
and Audiobook lists, you can play files in
and connect again.
other categories in iPod mode.
• When connecting to iPod Nano/Classic,
• The screen of multimedia system can
the Kia Motor logo appears on the Apple
be different when you run other music
device. For the iPod Nano 6 genera-
players (e.g. iHeartRadio) on your con-
tion, however, the logo image does not
nected device.
appear since it is not supported. Also, all
iPhone and iPod Touch products do not
02
support this function.
iPod I 2-11
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-11
2016-11-18 오후 3:30:5
Caution
• If you control pause, repeat, shuffle, or
• We recommend that your Apple device
seek songs when the play time is when
uses the latest firmware since some
• While using a connected iPhone/iPod
the play time is less than 3s before fin-
problems may occur due to an outdated
Touch device, it may not operate nor-
ished playing, it may occur difference of
firmware or other software related issues.
mally if the user changed some func-
playing song between the Multimedia
tions in the device.
system and Apple device. Access to
• When calling with an iPhone connec-
iPod music from another mode or pause
tion, song may stop playing due to an
a song and then play a song again in
Apple device feature. If sound does
Apple device.
not resume after the call is terminated,
check the device status.
• If lots of songs have the same information, skipping may occur when previous/
next song is executed due to an Apple
device feature. Also problems may occur
depending on device type or iOS version.
• If lots of songs have the same information, it may occur difference of playing
Type
1G
2G
3G
4G
5G
iPod Mini
Not Supported
iPod Shuffle
Not Supported
iPod Nano
○
iPod Touch
(iOS 1.1 not
supported)
○
○
○
○
○
○
○
○
○
7G
○
Not
released
○
Not released
○ (Unable to charge, Not verified, Normal working not guaranteed)
iPad Mini
○ (Unable to charge, Not verified, Normal working not guaranteed)
iPod Classic
Not Supported
delete the same songs in the Apple
device using iTunes.
6.5G
iPad
songs between the Multimedia system
and Apple device. Reset the device or
6G
○
○
○
(iPod with
Video)
(iPod
Classic)
(iPod
Classic)
Not
released
Type
3G
3GS
4S
5C
5S
6+
iPhone
Not verified,
Normal
working not
guaranteed
○
○
○
○
○
○
○
○
2-12 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-12
2016-11-18 오후 3:30:5
Caution
• If connect to the Multimedia system
while podcast or iTunes music down-
• If the iPhone/iPod Touch supports
loading to iPod/iPhone, it may occur
Bluetooth, it is unable to use Bluetooth
some problems when you select song
Audio if the Apple device that is con-
in the list. Reconnect iPod/iPhone to the
nected to the Multimedia system
Multimedia system when downloading
through both USB connection and
is finished or the file deleted.
Bluetooth. Disconnect the USB connection then use Bluetooth Audio.
• If connect to the Multimedia system
while sync, it may occur some problems.
• If iPod/iPhone connected to the
Try to use iPod/iPhone connection after
Multimedia system through both USB
sync complete. (To learn more, refer to
and AUX. iPod/iPhone keeps output
sound via AUX, thus it may occur sound
will not output in iPod mode.
your iPod manual)
• iPhone and iPod Touch devices are
guaranteed to work normally on iOS
• If AUX cable connected to iPod/iPhone
9.3.2 or below. However, they may not
but not connect to the Multimedia sys-
work normally on future iOS versions
tem, it may occur sound will not output
as their operations have not yet been
in iPod mode due to iPod/iPhone’s fea-
tested.
ture. Especially, if you use AUX cable
like pictures, this problem may occur.
02
• Disconnect AUX cable from iPod/iPhone
first, then connect to the Multimedia
system via USB. Or change settings to
“Dock” in iPod/iPhone.
iPod I 2-13
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-13
2016-11-18 오후 3:30:5
iPod Mode Display Controls
Features
Features
Description
Previous File
If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file
from the beginning (Depends on the play time)
• If play time is less than 3 seconds, moves to
previous file
• If play time is more than 3 seconds, play the
current file from the beginning
If button is pressed (more than 0.8 seconds): It
rewinds the track
Play/Pause
Plays/pauses the current file
Next File
• If button is pressed (less than 0.8 seconds):
Moves to the next file
• If button is pressed (more than 0.8 seconds):
It fast-forwards the track
Repeat
Repeats the current file
Select the Repeat button to switch between
repeating 1 track, and turning repeat off
Shuffle
Plays files in random order
When selecting Shuffle button, it changes to
shuffle category → deactivate shuffle then
repeat
• Shuffle Category: Shuffle song in the current
category
Back Button
Move to home/previous mode screen
Menu
Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the sound.
Description
Mode
Displays current operating mode
Song Index
Shows the current song/total songs
Repeat/Shuffle
From Repeat/Shuffle, displays the current
operating function
Play Time
Displays the current play time/total play time
Song Info
Displays the artist/song title/album info
List
Moves to the list screen
2-14 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-14
2016-11-18 오후 3:30:5
Features
02
TUNE
Description
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, press the
TUNE knob to play the track.
TUNE knob
If you do not anything with the
for 5 seconds of searching tracks, the track
info for the current track is restored.
iPod I 2-15
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-15
2016-11-18 오후 3:31:0
Features
Description
Category Name
Displays the category name
Category List
Displays the contents of selected category
If there are many items in the list, items are
added in order and the scroll bar on the right
is adjusted accordingly.
Back Button
Converts to basic mode screen
Upper Category
Moves to Upper Category
Search Menu
Search tracks by the list type. Search songs
according to Playlist, Artist, Song, Album,
Genre, Composer, Podcast and Audiobook.
If access the search menu while playing a
track, it moves to the previous search mode.
SEEK/TRACK
• If button is pressed (less than 0.8 seconds):
Plays previous/next track.
• If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind
or fast-forward the track.
TUNE
TUNE knob to search a desired
Turn the
track. If the desired track is displayed, press the
TUNE knob to play the track.
If you do not anything with the knob for 5 seconds,
the TUNE knob search will be terminated.
2-16 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-16
2016-11-18 오후 3:31:0
AUX
Connecting an External Device
If an external device connector is connected with the AUX terminal, then AUX
mode will automatically operate. Once the
connector is disconnected, the previous
mode will be restored.
NOTICE
• If only a cable is connected to the AUX
without an external device, the mode will be
changed to AUX, but noise may occur. When
an external device is not being used, remove
the connector jack.
• When the external device power is connected
to the power jack, playing the external device
may output noise. In such cases, disconnect
the power connection before use.
• AUX mode can be used only when an
external audio player has been connected.
• The AUX volume can also be controlled
separately through the connected
device.
02
※ The actual feature in the vehicle may
differ from the illustration.
AUX I 2-17
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-17
2016-11-18 오후 3:31:0
Bluetooth® Audio
Features
Bluetooth Audio Mode Display Controls
Features
Name of current artist
Title
Name of current song
Previous File
• If play time is less than 3 seconds, moves to
the previous file
• If play time is over than 3 seconds, plays the
current file from the beginning
This function may differ depending on the
model of mobile phone
Play/Pause
Plays/Pauses Bluetooth Audio
Next File
Moves to the next file
Repeat
Repeats the current file.
This function may differ depending on the
model of mobile phone.
Shuffle
Plays files in random order.
This function may differ depending on the
model of mobile phone.
Menu
• Connections: Moves to the Bluetooth Settings
screen. You can pair a new device or change/
delete paired device(s).
• Sound Settings: Moves to the Sound Settings
screen. You can change the settings of the
sound.
SEEK/TRACK
Plays the previous/next file
Description
Mode
Displays the current operating mode
Phone Name
Displays name of connected phone
Description
Artist Info
TUNE
TUNE is not supported.
i Information
• Artist info and Title may not be supported by mobile phone.
2-18 I Radio/Media
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-18
2016-11-18 오후 3:31:1
Bluetooth Connection Settings
Settings for pairing, connection and disconnection of a Bluetooth device.
• In Bluetooth Audio play screen, select
Menu and then Connections .
i Information
02
• If the music in the mobile phone is not
played after changing to audio streaming
mode, press the play button. Thus check if
the music is playing in the Bluetooth device
after changing to audio streaming mode.
Audio streaming may not be supported for
some mobile phones.
Bluetooth® Audio I 2-19
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-19
2016-11-18 오후 3:31:1
MEMO
K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-20
2016-11-18 오후 3:31:1
part.3
Bluetooth
®
Before Using the Bluetooth Handsfree
Bluetooth Connection
Bluetooth Phone
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-1
2016-11-18 오후 3:31:5
Bluetooth
Before Using the
Bluetooth® Handsfree
®
• The Bluetooth Handsfree feature
may not be supported in some mobile
phones.
®
What is Bluetooth
Wireless Technology?
®
• Bluetooth is a feature that enables drivers to practice safe driving. Connecting
®
the head unit with a Bluetooth phone
®
• Bluetooth Wireless Technology refers
to a short-distance wireless networking
technology which uses a 2.45GHz frequency to connect various devices within
a certain distance.
• Supported within PCs, external devices,
®
Bluetooth phones, PDAs, various electronic devices, and automotive environ®
ments, Bluetooth Wireless Technology
to be transmitted at high speeds without
WARNING
allows the user to conveniently make
- Distracted Driving
calls, receive calls, and manage the
• Focus on the road while driving. The driver's
primary responsibility is in the safe and legal
operation of the vehicle. Drivers should not
use any hand held devices or other equipment
or vehicle systems that distract the driver
during vehicle operation.
• Do not stare at the multimedia screen for long
periods of time while driving. Staring at the
screen for prolonged periods of time can lead
to traffic accidents and can result in personal
injuries.
phonebook. Before using Bluetooth
®
Wireless Technology, carefully read the
contents of this user’s manual.
• Excessive use or operations while driving may lead to negligent driving practices and be the cause of accidents. Do
not operate the device excessively while
driving.
• Viewing the screen for prolonged periods of time is dangerous and may lead
having to use a connector cable.
®
• Bluetooth Handsfree refers to a device
which allows the user to conveniently
make phone calls with Bluetooth
Precautions for Safe Driving
to accidents. When driving, view the
screen only for short periods of time.
®
mobile phones through the Multimedia
system.
3-2 I Bluetooth
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-2
2016-11-18 오후 3:31:5
CAUTIONS upon Connecting
Bluetooth® Phone
• If you do not want automatic connection
• Before connecting the head unit with
Bluetooth feature off of the Bluetooth
®
with your Bluetooth device, turn the
the mobile phone, check to see that the
®
mobile phone supports Bluetooth features.
®
®
• The Handsfree call volume and quality
may differ depending on the mobile phone.
®
• Pairing Bluetooth devices and use of
®
device.
other Bluetooth features are not sup-
• Park the vehicle when connecting the
head unit with the mobile phone.
safety, please first park your vehicle.
®
• Bluetooth connection may become inter-
• If you continue having issues with
Wireless Technology, the phone will
mittently disconnected in some mobile
downloading contacts, please check the
not be found during device searches if
phones. Follow these steps to try again.
mobile phone status or inquire of the
• Even if the phone supports Bluetooth
the phone has been set to hidden state
®
or the Bluetooth power is turned off.
Disable the hidden state or turn on the
®
Bluetooth power prior to searching/
connecting with the head unit.
®
1. Turn the Bluetooth function within the
mobile phone manufacturer.
mobile phone OFF/ON and try again.
2. Turn the mobile phone power OFF/
ON and try again.
3. Completely remove the mobile phone
®
• If Auto Connection is used, the Bluetooth
phone is automatically connected when
the ignition is turned on, making it unnecessary to have to connect the phone with
the head unit every time.
®
ported when the vehicle is in motion. For
battery, reboot, and then again.
4. Reboot the Multimedia System and
try again.
5. Delete all paired devices from both of
Phone and Head Unit sides and then
03
try again.
Before Using the Bluetooth® Handsfree I 3-3
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-3
2016-11-18 오후 3:31:5
Bluetooth Connection
Pairing a New Device
Before you can use the Bluetooth feature,
you must first pair/connect your mobile
phone to your car.
Up to 5 Bluetooth devices can be paired.
Only one Bluetooth device can be con-
Pairing a New Device Through the
Phone Settings
Press the
▶ Select
key. ▶ Select Bluetooth .
Bluetooth Connection . ▶ Select
SETUP
Connecting Bluetooth Devices
Connects the Bluetooth devices that you
add.
. ▶ Pair your car after your mobile
phone detects the Bluetooth device. ▶
Connecting Devices by Selecting
Phone/Call
Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.
Press the
Add New
nected at a time.
PHONE
key or
key in
the steering wheel control. ▶ Select the
name of the device to connect. ▶ Connect
Bluetooth.
Pairing a New Device by Selecting
Phone/Call
Press the
PHONE
key or
key in
the steering wheel control. ▶ Pair your car
after your mobile phone detects the
Bluetooth device. ▶ Enter the passkey or
accept the authorization popup. ▶
The default passkey is 0000.
Connect Bluetooth.
The vehicle name above is an example.
Check the actual information on the product.
3-4 I Bluetooth
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-4
2016-11-18 오후 3:31:5
Connecting Devices Through the
Phone Settings
Press the
▶ Select
key. ▶ Select Bluetooth .
Bluetooth Connection . ▶ Select the
SETUP
Disconnecting
Bluetooth Devices
Deletes the Bluetooth devices that you
Disconnects Bluetooth devices that are
added. Note that deleting a Bluetooth
connected.
device will delete all Call History and
name of the device to connect. ▶ Connect
Bluetooth.
Deleting Bluetooth Devices
Contact Info downloaded along with it.
Press the
▶ Select
SETUP
key. ▶ Select Bluetooth .
. ▶ Select the
Bluetooth Connection
name of the device to disconnect.
key. ▶ Select
Press the
SETUP
▶ Select
Bluetooth Connection
Delete Devices
Bluetooth
. ▶ Select
. ▶ Select the device name
Delete
03
to delete. ▶ Select
Bluetooth Connection I 3-5
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-5
2016-11-18 오후 3:32:0
Bluetooth Phone
Phone Status Icons
Shows the current phone status in the
right top of the display.
Icons
Description
You can use Bluetooth phones
when a Bluetooth Hands-free
connection is established.
You can use Bluetooth audio
features when a Bluetooth
audio connection is established.
i Information
• The battery level icon and the call signal
strength indicator may not be supported in
some Bluetooth devices.
• The battery level may differ from the actual
level remaining.
You can use Bluetooth phones
and audio features when both
Bluetooth Hands-free and audio
connections are established.
Call signal strength indicator
Battery level of the Bluetooth
devices connected
Downloading Call History list
Downloading Contacts
In a Bluetooth phone call
Microphone muted
3-6 I Bluetooth
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-6
2016-11-18 오후 3:32:0
Dial
Name
Description
Keypad
Use the keypad to enter
the phone number that
you want to call. Press
and hold the last number
of a speed dial to dial a
number that you added
to the Speed Dial list in
the phone
Call
Makes a call after you
dial a number and select
CALL. If the number is
listed in Dialed Calls, you
can select the number
and press CALL to automatically dial that number again.
Dials a call after the Bluetooth devices
are connected.
• Press the
PHONE
key or
the steering wheel control.
• You can also select All Menus ▶
key in
Phone
Settings
Delete
Moves to a screen of
Phone Settings.
Deletes the numbers that
you entered.
i Information
If there is an incoming call after you
made a Bluetooth connection, a popup
message will appear.
Name
Description
Accept
Answers the call.
Reject
Ignores the call.
i Information
• In some mobile phones, the caller’s number
may not be displayed, and the Reject feature
may not be supported.
03
• Some types of mobile phones may not
support the Speed Dial function.
Accept/Reject Call
Bluetooth Phone I 3-7
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-7
2016-11-18 오후 3:32:0
Using the Menu During
a Phone Call
Name
Description
Use Private
Switches a voice call
from the car Hands-free
to the mobile phone.
End
Ends a call.
Contacts
Displays the Contacts
list.
Outgoing
Volume
Displays the Mic Volume
settings. You can adjust
the in-call volume that
the other party hears
(level 1 - 5).
Keypad
Moves to a screen for
entering numbers.
Switch
Switches to a call on
hold, if any. You can also
switch calls by selecting the number in the
Information Display. The
Switch function switches
the current call to a waiting call in order to answer
a new incoming call.
i Information
• If the caller’s number is listed in Contacts, the
caller’s name will be displayed. Otherwise,
only the number will be displayed. In some
mobile phones, the phone number may not
be displayed.
• In some Bluetooth devices, the Use Private
feature may not be supported.
• In some Bluetooth devices, the Switch feature
may not be supported.
• During a phone call on a Bluetooth Handsfree, you cannot access other modes, such as
Radio and Setup.
• Depending on handset types, the in-call
volume the other party hears may differ. If the
other party hears your voice too low or too
loud, adjust the mic volume.
When making a call, you can use the following menu items.
3-8 I Bluetooth
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-8
2016-11-18 오후 3:32:1
i Information
Press the
PHONE
Name
key, and then
Call History
Description
All
Lists the all call history.
Dialed
Lists the calls that you
made.
Received
Lists the calls that you
have received.
Missed
Lists the calls you
missed.
Call History
Displays all of your
call history. Select
from the list to dial the
number.
Download
Downloads the call history information from
your mobile phone.
• In some mobile phones, call records may not
be added to your Call History.
• Calls from restricted ID’s are not added to
your Call History Information.
• Up to 50 calls can be added in each Dialed
Calls/Received Calls/Missed Calls list.
• The durations of each dialed/received call are
not displayed in your car’s Call History list.
• While the call history download is in progress,
the status bar displays an icon ( ).
• If the call history download is turned off on the
Bluetooth device, the call history download
will fail.
• Some devices require a device authentication
for downloading your call history. If download
fails, check if the Bluetooth settings or display
status are normal.
• Some devices do not support call history
download. Check if your Bluetooth device
supports download feature.
03
Call History
Bluetooth Phone I 3-9
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-9
2016-11-18 오후 3:32:1
i Information
Contacts
Press the
PHONE
Name
key, and then
Contacts
Description
Contacts List
The list of Contacts.
Select from the list to
dial the number.
Download
Downloads contacts
from your mobile phone.
Search
Searches Contacts.
• U p t o 5 0 0 0 p h o n e nu m b e r s c a n b e
downloaded from a single, paired Bluetooth
device.
• You cannot edit or delete downloaded phone
numbers from your car.
• Contacts can be viewed only when the
Bluetooth device is connected.
• Even if the Bluetooth device is disconnected,
the downloaded data will remain. (Note that
deleting a paired phone will also delete all
downloaded Contacts and Call History data)
• Downloaded phone numbers may be lost
depending on the condition of the head unit.
Keep your important data in a safe place.
• Contacts from both the SIM card and your
mobile phone are downloaded at the same
time by default.
• The status bar displays a ( ) while
downloading contacts.
• The download will not be available if the
contacts download function is turned off on
your Bluetooth device.
• Some devices require a device authentication
for downloading your contacts. If download
fails, check your phone screen and confirm
the download if necessary.
• Some devices do not support contacts
download feature. Check if your Bluetooth
device supports contacts download.
3-10 I Bluetooth
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-10
2016-11-18 오후 3:32:2
Favorites
Press the
PHONE
key, and then
Favorites
Description
Favorites
Lists the phone numbers saved as Favorites.
Select from the list to
dial the number.
Add New
Adds a new number to
Favorites.
Delete
Deletes numbers
that you select from
Favorites.
03
Name
Bluetooth Phone I 3-11
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-11
2016-11-18 오후 3:32:2
MEMO
K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-12
2016-11-18 오후 3:32:3
part.4
Other Features
Camera
K_SC 17_DAUD2[MEX_EG]AV_PART4.indd 4-1
2016-11-18 오후 3:32:4
Other Features
Camera
Steering-linked camera
• This device is connected to a rear
WARNING
- Backing Up & Using Camera
• Never rely solely on the rear view camera
when backing up. Prior to entering your
vehicle always do a visual check of the area
behind your vehicle, and before backing up be
aware of your surroundings and supplement
the rear view camera by looking over your
shoulders and checking your rear view mirrors. Due to the difficulty of ensuring that the
area behind you remains clear, always back
up slowly and stop immediately if you even
suspect that a person, and especially a child,
might be behind you.
i Information
• A separate chipset is used for the camera
screen while booting up, so it may be different
after booting up.
detection camera to see behind the car
for safe reversing.
• The Rear View Camera turns on automatically if you shift the gear to R when
the power is on or the engine has
started.
• While the device boots up, shift the gear
to “R” to activate the rear detection cam-
Name
Description
Red Line
About 0.5 m from the
rear bumper
Yellow Line 1
About 1 m from the rear
bumper
Yellow Line 2
About 3 m from the rear
bumper
Yellow Line 3
Trajectory of the wheel
on the driver’s side
Yellow Line 4
Trajectory of the wheel
on the passenger side
Blue Line
Neutral steering trajectory
eras. Shift the gear to another position
to deactivate the rear detection camera.
NOTICE
• A wide-angle lens is installed as the rear
detection camera to get a wider view, so
there may be some difference between the
actual distance and the distance that appears.
on-screen. For safety, make sure to view
the back, right, and left sides of the car for
yourself.
• The color of the parking guidelines displayed
in the picture may differ from the actual
screen.
• When booted up, blinking may occur when
you switch to a UI screen.
As you reverse your car and monitor the
area behind your car, the steering-linked
driving trajectory and the neutral driving
trajectory are both displayed.
4-2 I Other Features
K_SC 17_DAUD2[MEX_EG]AV_PART4.indd 4-2
2016-11-18 오후 3:32:4
part.5
Setup
Setup
Sound Settings
Display Settings
Bluetooth Settings
Custom Button Settings
Home Screen Settings
Date/Time Settings
Language Settings
Keyboard Settings
Screen Saver Settings
Advanced Settings
System Info
K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-1
2016-11-18 오후 3:33:0
Setup
Setup
Setup is the screen to control Audio system settings.
To enter the screen, press the
key or the
Setup
SETUP
icon in All Menus.
Features
Description
Sound
Provides the sound control options for Position,
Bass, Mid, Treble,
Volume, Priority and
Advanced settings.
Display
Provides the Mode/
Illumination settings.
Bluetooth
Provides the Bluetooth
Connection/Auto
Connection Priority/
Bluetooth System Info
settings.
Phone
Projection
Custom
Button
For more details, refer to
Phone Projection guide.
Provides settings that
configure the feature to
be accessed when the
key is pressed.
Features
Description
Home
Screen
Provides the function
to customize the three
menu items at the bottom
of the Home Screen.
Date/Time
Provides the Date and
Time settings.
Language
Provides the Change
Language settings.
Keyboard
Provides settings to
switch keyboard layouts.
Screen
Saver
Provides the Clock/None
settings.
Advanced
Provides settings that
configure notifications
per feature, etc.
System Info
Provides software and
default information.
Display Off
Provides the Display Off
(touch activation) function.
5-2 I Setup
K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-2
2016-11-18 오후 3:33:0
Adjusts the sound effects for the whole
Features
Priority
Advanced
Select additional audio
options such as “Speed
Dependent Volume
Control” that automatically
controls Audio volume
according to vehicle speed.
Default
Resets the sound to factory default settings.
Beep
Select to activate a beep
when pressing buttons.
system.
Features
Description
Position
Select the Up/Down/Left/
Right button to control
sound positioning.
to concenSelect
trate the sound on the
center of vehicle.
Tone
Drag the slide bar to control Bass/Middle/Treble
settings.
Select Center to initialize
the settings.
Description
Sets the volume priority
for Back-up warning and
resets Start-up volume.
i Information
• Advanced sound settings may differ according
to selected AMP option.
• The seat shape may differ according to
vehicle model.
Display Settings
Adjusts the level of illumination for the
entire system.
Features
Description
Mode
Select any of LCD illumination change modes:
Automatic (changes
the level automatically),
Daylight, and Night.
Illumination
Set the levels of illumination for day and night.
Select Default to initialize
the settings.
Default
Resets the display to factory default settings
Display Off
Provides the Display Off
(touch activation) function.
05
Sound Settings
Setup I 5-3
K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-3
2016-11-18 오후 3:33:2
Bluetooth Settings
Bluetooth Connection
Press the
▶ Select
Changes Bluetooth phone settings.
SETUP
key ▶ Select
Bluetooth Connection .
Features
Paired Device
List
Bluetooth
Audio
Connection
Status
An icon appears
when you make a
Bluetooth Audio connection.
Bluetooth
Hands-Free
Connection
Status
An icon appears
when you make a
Bluetooth Hands-free
connection.
Add New
Register a new
Bluetooth device.
Delete
Devices
Select and delete a
paired device.
Help
Switches to the
Bluetooth Connection
Help screen.
Bluetooth
Bluetooth Settings
Press the
SETUP
key ▶ Select
Bluetooth
Description
Displays the paired
Bluetooth device list.
When selecting from
the list, the device is
connected or disconnected.
5-4 I Setup
K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-4
2016-11-18 오후 3:33:3
Auto Connection Priority
Press the
▶ Select
SETUP
key ▶ Select
Auto Connection Priority
Bluetooth
When the engine is running, the selected
Bluetooth device is automatically connected. If you fail to connect the selected
Bluetooth System Info
Press the
▶ Select
SETUP
Bluetooth
Features
Description
Vehicle
Name
You can change the
Bluetooth device name of
the vehicle.
Passkey
You can change the passkey used for Bluetooth
device authentication. the
initial passkey is 0000.
device, the previously-connected device is
automatically connected, and if it also fails,
then it tries to connect all paired devices
key ▶ Select
Bluetooth System Info
sequentially.
Depending on auto connection priority,
connection to a device may take time.
i Information
• The vehicle name above is an example.
Check the actual information on the product.
05
i Information
• Up to 5 Bluetooth devices can be paired.
• Only one Bluetooth device can be connected
at a time.
• During a Bluetooth device connection, another
device cannot be paired.
• When you delete a paired device, the Call
History and Contacts stored in the head unit
are also deleted.
• Bluetooth Hands-free and Bluetooth Audio
functions are supported.
• Hands-free and audio-supported devices,
such as a Bluetooth smartphone or audio, will
function normally.
• When a Bluetooth device is connected, if
the Bluetooth connection is unexpectedly
disconnected, due to being out of
communication range, the device powering
off, or a Bluetooth communication error, the
Bluetooth device automatically searches for
and connects to nearby Bluetooth devices.
• If the system is not stable, due to a vehicleBluetooth device communication error, restore
the Default Factory Settings.
• For Default Factory Settings, the bluetooth
settings are reset to factory settings.
• Press the SETUP key ▶ Select Bluetooth
▶ Select Default Factory Settings .
Setup I 5-5
K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-5
2016-11-18 오후 3:33:5
Custom Button Settings
Home Screen Settings
Date/Time Settings
You can configure the feature to be
accessed when the
key is pressed.
You can customize the three menu items
Configure the settings for time and date.
at the bottom right of the Home Screen
Using the arrow buttons, you can change
into the ones you want.
the values. Date/Time settings do not
automatically change when crossing into
On the Home Screen Settings screen,
different time zones. The time must be
drag the menu items on the right to the
changed manually on this screen.
area marked in red in the screen below.
Setting it to a feature that you frequently
use will allow you to access the feature
quickly and conveniently anytime.
For example, setting it to My Menu will
enable you to access the My Menu screen
key.
by pressing the
Features
i Information
• You can select the Default button to reset
to the factory default settings.
Description
Daylight
Saving Time
The daylight saving time
(DST) is applied.
24 Hours
The time display is set in
24-hour format.
Direct entry
If you tap any value, you
can directly enter the
number in the following
screen.
5-6 I Setup
K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-6
2016-11-18 오후 3:33:5
Language Settings
Keyboard Settings
Screen Saver Settings
You can configure the displayed system
You can configure the keyboard layout for
You can select any of the following screen
language.
each language.
formats to be displayed when the screen
or power is turned off (Press and hold the
Power button).
• Digital clock and date
• Analog clock and date
• None
When the language is changed, the system language is automatically changed.
Unique data including MP3 file name is
i Information
• Configured keyboard layouts are applied
to all input modes.
05
not changed.
Setup I 5-7
K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-7
2016-11-18 오후 3:34:0
Advanced Settings
System Info
You can configure notifications per feature,
System version information and update
memory with the latest file downloaded,
etc.
details are available.
and then select the
System Update
At the System Info screen, insert the USB
Update
button to begin
updating. The system will then reboot
automatically.
i Information
• This product needs supplemented software
updates and additional functions, which
collectively may take some time to complete,
depending on the amount of data.
Features
Description
Media
Change
Notifications
Sets whether to display
media information at the
top of the screen as the
next item is played when
not on the media screen.
Steering
Wheel Mode
Button
You can configure the
media to be accessed
when the steering
wheel’s MODE button
is pressed.
Select the
system.
Update
button to update the
CAUTION
• If the power is disconnected or the USB is
removed during an update, the data might be
damaged. Please do not turn off the vehicle
while an update is in progress.
5-8 I Setup
K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-8
2016-11-18 오후 3:34:0
part.6
Appendix
Product Specification
Troubleshooting
FAQ
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-1
2016-11-18 오후 3:34:2
Appendix
Product Specification
TFT-LCD
Common
Name
Car TFT LCD Display Audio Unit
Power Supply
DC 14.4 V
Operating
Power
DC 9 V ~ DC 16 V
Current
Consumption
2.5 A
Sleep
Current
1 mA
(Head Unit Only)
Storage
Temperature
-30 ~ +80 °C
(-22 ~ +176 °F)
Screen Size
7 inch(152.4 X 91.44 mm)
Resolution
384000 pixels (Resolution: 800 x 480)
Operating
Method
TFT(Thin Film Transistor) Active Matrix
Viewing Angle
Left/Right, Top/Bottom: ALL 89°
Operating
Temperature
-20 ~ +70 °C
(-4 ~ +158 °F)
Internal Lighting
LED
Dimensions
178 X 140.2 X 60 mm (Main BOX)
Weight
1.7 kg
Radio
Channels
FM: 87.5 MHz ~ 107.9 MHz(Step: 200 kHz)
AM: 530 kHz ~ 1710 kHz(Step: 10 kHz)
Sensitivity
FM: Under 10 dBu/AM: Under 35 dBu
Distortion Factor
Within 2 %
6-2 I Appendix
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-2
2016-11-18 오후 3:34:2
Bluetooth ® Wireless Technology
Supported
Bluetooth®
Specification
Frequency
Range
2402 ~ 2480 MHz
Supported
Profile
Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0)
Output
-6~4 dBm (Power Class2, Conducted)
Number of
Channels
79 channels
3.0
CAUTION
06
• The producer and installer cannot provide services related to
life safety as the concerned radio equipment is liable to radio
interference.
Appendix I 6-3
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-3
2016-11-18 오후 3:34:2
Troubleshooting
1. Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual device.
Problem
Possible Cause
Sound does not work in
AUX mode
• Are the audio connector jacks fully
inserted into the AUX terminal?
The external device is
not working
• Is the external device connected with a
standard connector cable?
Upon turning power on,
the most recent mode
screen is not displayed
Within modes that play files by reading
external sources, such as USB, iPod, or
®
Bluetooth streaming mode, the most
recently played mode screen prior to turning off power may not properly load
• If the corresponding device is not connected, the mode operated prior to the
most recent mode will operate
• If the previous mode still cannot be
properly played, the mode operated
prior to that will operate
2. If you are having problems with the device, try the suggestions
listed below.
3. If the problems persist, contact your Kia dealer.
Problem
Possible Cause
There are small red,
blue, or green dots on
the screen
• Because the LCD is manufactured with
technology requiring high point density,
a pixel or lighting deficiency may occur
within 0.01% of total pixels
The sound or image is
not working
• Has the Switch for the vehicle been
turned to [ACC] or [ON]?
• Has the SYSTEM been turned OFF?
The screen is being
displayed but sound is
not working
• Has the volume been set to a low level?
• Has the volume been muted?
When the power is
turned on, the corners
of the screen are dark
• The display appearing somewhat dark
after prolonged periods of use is normal
with LCD panels. It is not a malfunction
• If the screen is very dark, contact your
nearest Kia dealer for assistance
Sound is working from
only one speaker
• Are the positions of Fader or Balance
sound controls adjusted to only one
side?
6-4 I Appendix
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-4
2016-11-18 오후 3:34:2
Problem
The power
does not
turn on
The system
does not
play
Possible Cause
The fuse is
disconnected
Countermeasure
Problem
Possible Cause
Countermeasure
• Replace with a suitable
fuse
• If the fuse is disconnected
again, please contact your
point of purchase or Kia
dealer
The image
color/tone
quality is
low
• The brightness,
saturation, hue,
and contrast levels
are not set properly
• Properly adjust the brightness, saturation, hue, and
contrast levels through
Display Setup
• The volume level
is set to the lowest
level
• The connection is
not proper
• Adjust the volume level
Device is not properly connected
• Check to see that the
device has been properly
connected
The vehicle battery
is low
• Charge the battery If the
problem persists, contact
your point of purchase or
Kia dealer
Sound does
not work
• Vibration is occurring from where
the conversion
switch has been
installed
• Image color/tone
quality is low
• The sound may be
short-circuited and the
image distorted if the
device vibrates
• The device will return to
normal once vibrations
stop
06
The sound
or image
quality is
low
• The device is
currently fast-forwarding, rewinding,
scanning, or playing in slow mode
• Check to see that the
device has been properly
connected
• The sound will not work
when the device is fast-forwarding, rewinding, scanning, or playing in slow
mode
Appendix I 6-5
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-5
2016-11-18 오후 3:34:2
Problem
The USB
does not
work
Possible Cause
Countermeasure
• USB memory is
damaged
• Please use the USB after
formatting it.
• USB memory has
been contaminated
• Remove any foreign substances on the contact surface of the USB memory
and multimedia terminal
• A separately purchased USB HUB
is being used
• Directly connect the USB
memory with the multimedia terminal on the vehicle
• A USB extension
cable is being
used
• Directly connect the USB
memory with the multimedia terminal on the vehicle
• A USB which is
not a Metal Cover
Type USB Memory
is being used
• Use standard USB Memory
• An HDD type, CF,
SD Memory is
being used
• Use standard USB Memory
• There are no
music files which
can be played
• Only MP3, WMA file
formats are supported.
Please use only the supported music file formats
Problem
The iPod is
not recognized even
though it
has been
connected
Bluetooth
does not
work or its
limited
functions
are
available
Possible Cause
Countermeasure
• There are no titles
which can be
played
• Use iTunes to download
and save MP3 files into the
iPod
• The iPod firmware
version has not
been properly
updated
• Use iTunes to update
the firmware version and
reconnect the iPod with the
device
• The iPod device
does not recognize downloads
• Reset the iPod and reconnect with the device
• Bluetooth on your
mobile phone is
set to OFF
• Set it to ON
• The Bluetooth
connection is not
made
• Make the connection
active
i Information
• While operating the device, if an abnormality occurs that cannot be
corrected with the above described measures, press the RESET key to
reset the system.
• Press and hold the RESET key (over 1 second). The device power will
turn off and the system will reset.
6-6 I Appendix
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-6
2016-11-18 오후 3:34:2
FAQ
About Pairing Mobile Phones
Q What is a Passkey?
Q I cannot pair my mobile phone. What is the cause?
®
A Check to see that the mobile phone supports Bluetooth func-
A A passkey is the password used to authenticate the connection
tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set
between the head unit and mobile phone. The passkey only
it to ON. If the cell phone still can’t be registered, try again after
needs to be entered once when pairing the mobile phone for
turning Bluetooth off and on, or delete the device registration on
the first time.
the multimedia system and cell phone and then register the cell
The initial passkey is 0000. You can change it with SETUP
Bluetooth ▶ Bluetooth System Info ▶ Passkey menu options.
phone again.
▶
Q What is the difference between pairing a mobile phone and connecting a mobile phone?
A Pairing occurs through authenticating the head unit and mobile
phone. Mobile phones paired to the head unit can be connected
and disconnected until the paired mobile phone is deleted from
®
the system. Bluetooth Handsfree features, such as making/
answering calls or managing contacts, are supported only in
06
mobile phones connected with the head unit.
Appendix I 6-7
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-7
2016-11-18 오후 3:34:2
About Bluetooth ® Wireless Technology/
Head Unit Use Environment
About Making/Answering Phone Calls
Q How can I answer a call?
A When there is an incoming call, a notification pop-up will
become displayed. To answer the incoming call, select the
Accept
button on the screen or press the
To reject the call, select the
A The wireless connection can be used within 15 yards.
key on the
steering wheel control.
press the
Q What is the range of my wireless connection?
Q How many mobile phones can be paired?
Reject
button on the screen or
A It is possible to pair up to five mobile phones.
key on the steering wheel control.
Q Why is call quality sometimes poor?
Q What should I do if I am talking on the Handsfree but want to
switch the call to the mobile phone?
A Check the reception sensitivity of the mobile phone when call
quality becomes worsened. The call quality may deteriorate when
A While on a call, press and hold (over 0.8 seconds) the
the signal strength is low. Call quality may also worsen if metal
but-
objects, such as beverage cans, are placed near the mobile
ton at the bottom of the Phone screen to switch the call to your
phone. Check to see if there are metal objects in the vicinity of
mobile phone.
the mobile phone. The call sound and quality may differ depend-
key on the steering wheel control or select the
Use Private
ing on the type of mobile phone.
6-8 I Appendix
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-8
2016-11-18 오후 3:34:2
Important Safety Information
Before using your Multimedia system, read and follow all instructions and safety information provided in this end user manual (“User’s
Guide”). Not following precautions found in this User’s Guide can lead to an accident or other serious consequences.
Keep User’s Guide in Vehicle
When kept in the vehicle, the User’s Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please
make certain that before using the system for the first time, all persons have access to the User’s Guide and read its instructions and
safety information carefully.
Warning
Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other
serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a
safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may
06
to distract your attention away from the road and remove your hands from the wheel.
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-9
2016-11-18 오후 3:34:2
Prolonged Views of Screen
Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before
attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous
if your attention has been diverted away from your driving task at a critical time.
Volume Setting
Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while
driving. Driving while unable to hear these sounds could cause an accident.
K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-10
2016-11-18 오후 3:34:2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : FEEL-6
Create Date                     : 2016:11:18 15:36:07+09:00
Modify Date                     : 2016:12:29 16:20:12+09:00
Title                           : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:12:29 16:20:12+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Creator                         : FEEL-6
Document ID                     : uuid:1fa5712e-c0b0-4130-9f5c-54b2c3a06ac7
Instance ID                     : uuid:6146843e-989c-4fcc-8ec5-e11aa636f109
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Page Count                      : 67
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TQ8-ADBA0J5AN

Navigation menu