HYUNDAI MOBIS ADBB0A9AN DISPLAY CAR SYSTEM User Manual

HYUNDAI MOBIS CO., LTD. DISPLAY CAR SYSTEM

User Manual

CAR MULTIMEDIA SYSTEM USER'S MANUALC6EUG01(미국/영어-English)CAR MULTIMEDIA SYSTEM  I  미국/영어-EnglishK_UMa_UVO3[USA_EU]AV_COVER.indd   2-3K_UMa_UVO3[USA_EU]AV_COVER.indd   2-3 2016-01-27   오후 4:22:372016-01-27   오후 4:22:3
Read the following safety precautions for your safetyBefore using the product, read the contents of this user's manual carefully and use this product safely.※ The design and specifi cations of this product may change without prior notifi cation for product and service improvement.The actual features in the vehicle may differ from the illustrations.For more accurate information about the vehicle, please refer to the     catalogue.※  This Audio system contains open source software, including without limitation, software distributed and/or modifi ed under the GNU General Public license, Version 2, June 1991, and the GNU lesser General Public License, Version 2.1, February 1999.  For additional information and to obtain related materials including without limitation, the previous referred to licenses and software, please contact us at MOBIS_OSSrequest@mobis.co.krNotations used within this User's Manual WARNING•  Failure to observe the instructions within this category could result in death or serious injury or damage to the vehicle. CAUTION•  Information on matters that could potentially lead to injury or vehicle damage/malfunction Information that could lead to higher user safetyi Information•  Information and tips that provide additional user convenience in using the product NOTICE•  Information on specific features that facilitate proper product use and functional understanding•  Information on terminology used within this manualK_UMa_UVO3[USA_EU]AV_PART0.indd   1K_UMa_UVO3[USA_EU]AV_PART0.indd   1 2016-01-27   오후 4:22:522016-01-27   오후 4:22:5
iPod®iPod® is a registered trademark of Apple Inc.Bluetooth® Wireless TechnologyA compatible Bluetooth® Wireless Technology-enabled cell phone is required to use Bluetooth® Wireless Technology.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth® enabled cell phone is required to use Bluetooth® Wireless Technology.A Bluetooth® Wireless Technology enabled cell phone is required to use Bluetooth® Wireless Technology. Bluetooth® Wireless Technology phone compatibility can be checked by visiting http://www.kia.com.HD Radio™ Technology HD Radio™ Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and "Arc" logos are proprietary trademarks of iBiquity Digital Corp.Pandora®Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries. Please visit http://www. pandora.com/legal for more information.Wi-Fi®The Wi-Fi CERTIFIED™ Logo is a certifi cation mark of Wi-Fi Alliance.K_UMa_UVO3[USA_EU]AV_PART0.indd   6K_UMa_UVO3[USA_EU]AV_PART0.indd   6 2016-01-27   오후 4:22:542016-01-27   오후 4:22:5
Warnings and CautionsKey Product FeaturesComponent Names and FunctionsStarting the System for the First Timepart.1 BasicK_UMa_UVO3[USA_EU]AV_PART1.indd   1-1K_UMa_UVO3[USA_EU]AV_PART1.indd   1-1 2016-01-27   오후 4:23:052016-01-27   오후 4:23:0
1-2 I Basic Safety Warnings •  Do not stare at the screen while driving. Staring at the screen for prolonged peri-ods of time could lead to traffic accidents.•  Do not disassemble, assemble, or modify the Multimedia system. Such acts could result in accidents, fire, or electric shock.•  Heed caution not to spill water or intro-duce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.•  If you use phone related functions while driving, you will find it difficult to concen-trate on operating the vehicle and the current traffic conditions, so the possibil-ity of an accident may increase. Please use phone related functions only when parked.•  Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal-function. Continued use in such con-ditions could lead to accidents (fires, electric shock) or product malfunctions.•  Do not touch the antenna during thun-der or lightening as such acts may lead to lightning induced electric shock.•  Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents.•  For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen.(The screen will only operate when the parking brake is ON for man-ual transmission vehicles and when the parking brake is ON or the gearshift is in the P (PARK) position for automatic.)•  Some functions other than the one mentioned above cannot be used while driving. These functions operate only when the vehicle is parked.  BasicK_UMa_UVO3[USA_EU]AV_PART1.indd   1-2K_UMa_UVO3[USA_EU]AV_PART1.indd   1-2 2016-01-27   오후 4:23:052016-01-27   오후 4:23:0
Warnings and Cautions I 1-301 Safety Cautions Pay attention to traffic conditions while driving. •  Operating the device while driving could lead to accidents due to a lack of atten-tion to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehi-cle is in motion. The touch screen fea-ture will be supported once the vehicle has stopped.•  Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents.•  Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impair-ment. (Adjust the volume to a suitable levels before turning off the device.)•  If you want to change the position of device installation, please inquire with your place of purchase or service main-tenance center. Technical expertise is required to install or disassemble the device.•  Turn on the car ignition before using this device. Do not operate the Multimedia system for long periods of time with the ignition turned off as such operations may lead to battery discharge.•  Upon using the Multimedia system for more than 10 minutes with the car engine turned off, the following warning will be displayed. After 10 minutes, the warning will be displayed for 5 seconds every 1 minute.•  Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.•  When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materi-als, chemical cloths, or solvents(alcohol, benzene, thinners, etc.) as such mate-rials may damage the device panel or cause color/quality deterioration. When experiencing product concerns, inquire with your place of purchase or service maintenance center.•  Prevent caustic solutions such as per-fume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration.K_UMa_UVO3[USA_EU]AV_PART1.indd   1-3K_UMa_UVO3[USA_EU]AV_PART1.indd   1-3 2016-01-27   오후 4:23:062016-01-27   오후 4:23:0
1-4 I BasicKey Product FeaturesThis device is a Multimedia system equipped with a multifunc-tional disc player that supports Radio (FM, AM), HD Radio™ Technology (if equipped), SiriusXM™, Audio CD, MP3, USB, iPod, AUX, Bluetooth Audio and My Music features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment.DisplayWide TFT-LCD Display•  Provides high quality video through a Wide TFT-LCD Display using an LED Back Light.•  Touch screen for maximum user convenience.RadioDigital Tuner Feature•  Digital Tuner using PLL method that supports memory of 40 broadcast stations.Radio broadcast station name•  Displays broadcast station names.HD Radio™(if equipped)/Satellite Radio feature•  Supports HD Radio™(if equipped) reception and Satellite Radio (SiriusXM™).MultimediaPlayerSupport for various Media Formats•  Support for various media formats, including Radio, Audio CD, MP3, USB, iPod, AUX and Bluetooth® Audio Streaming modes My Music•  Supports copying of music stored within USB devices into My Music (internal memory) modeMiscellaneousBluetooth® Wireless Technology•  Convenient use of Bluetooth® Handsfree by using buttons within the steering wheel controlDigital Screen Control Features•  Easy control of features through touch screen optionsSteering Wheel Control•  Control over audio features, voice recognition and Bluetooth® through the steering wheel control for maximum convenienceK_UMa_UVO3[USA_EU]AV_PART1.indd   1-4K_UMa_UVO3[USA_EU]AV_PART1.indd   1-4 2016-01-27   오후 4:23:062016-01-27   오후 4:23:0
Component Names and Functions I 1-501Component Names and FunctionsHead UnitName DescriptionPress to insert or eject discRADIOSelects FM/AM/SiriusXM™ mode• Each time this is pressed, the mode is changed inthe following order: FM → AM → SiriusXM™ → FM.MEDIASelects MEDIA mode.• If the media is not connected MEDIA mode willnot be activated.TRACKSEEKWhen pressed quickly (less than 0.8 seconds),• FM/AM mode: Plays the previous/next frequency.• SiriusXM™ mode: Changes the channel.• MEDIA (Disc/USB/iPod/My Music) mode:Changes the track, file or title (except for USBImage and AUX).When pressed and held down (more than 0.8 sec-onds),• FM/AM mode: Continuously changes the fre-quency until the key is released.• MEDIA (Disc/USB/iPod/My Music) mode:Rewinds or fast forwards the track or file (except for USB Image, Bluetooth Audio, and AUX). PWR/   VOL • When power is off, press to turn power on.• When power is on, press and hold (more than 0.8seconds) to turn the power off.• When power is on, press quickly (less than 0.8seconds) to turn Audio off.• Turn left/right to adjust the volume.K_UMa_UVO3[USA_EU]AV_PART1.indd   1-5K_UMa_UVO3[USA_EU]AV_PART1.indd   1-5 2016-01-27   오후 4:23:062016-01-27   오후 4:23:0Name DescriptionDISPTurns the screen on/off.APPS/Moves to the Apps/Info screen.PHONEDisplays the Bluetooth phone mode.UVODisplays the UVO modeSETUPMoves to the Setup screen. TUNE• FM/AM mode: Changes the frequency.• SiriusXM™ mode: Changes the channel.• MEDIA (Disc/USB/iPod/My Music) mode:Changes the track, file or title (except USB Image, Bluetooth Audio, and AUX).RESETResets the system settings. (Preset radio channelsand other data will not be deleted)※ The actual feature in the vehicle may differ from the illustration.
01Name DescriptionWhen pressed quickly (less than 0.8 seconds),• If Android Auto is not connected, activates themultimedia system voice recognition• If Android Auto is connected, activates or endsGoogle voice recognitionWhen pressed and held (more than 0.8 seconds),• If the multimedia system voice recognition is acti-vated, ends the multimedia system voice recognition• If Android Auto is connected, activates or endsGoogle voice recognition• If iOS device is connected through Bluetooth,activates or ends Siri Eyes FreeName DescriptionWhen pressed quickly (less than 0.8 seconds),• FM/AM mode: searches broadcast frequenciessaved to Presets• SiriusXM™ mode: searches broadcast channelssaved to Presets• MEDIA (Disc/USB/iPod/My Music) mode: changesthe track, file or title (except USB Image, AUX)When pressed and held (more than 0.8 seconds),• FM/AM mode: automatically searches broadcastfrequencies• SiriusXM™ mode: automatically searches broad-cast channels• MEDIA (Disc/USB/iPod/My Music) mode: quicklylooks up songs (excluding USB images, AUX andBluetooth audio files)Steering Wheel ControlsK_UMa_UVO3[USA_EU]AV_PART1.indd   1-7K_UMa_UVO3[USA_EU]AV_PART1.indd   1-7 2016-01-27   오후 4:23:132016-01-27   오후 4:23:1MODE• Each time this is pressed, the mode is changed inthe following order: FM → AM → SiriusXM → Disc→ USB or iPod → AUX → Bluetooth Audio → MyMusic → Android Auto → Pandora → FM• If the media is not connected, the correspondingmodes will be disabled• Press and hold (more than 0.8 seconds) to turnthe Audio system on/off• When power is off, press button to turn powerback on+,  -Controls the volumeWhen pressed quickly (less than 0.8 seconds),• When pressed in the dial screen, makes a call• When pressed in the incoming call screen,answers the call• When pressed during call waiting, switches towaiting call (Call Waiting)When pressed and held (more than 0.8 seconds),• When pressed in Bluetooth® Hands-free, redialsthe last dialed call• When pressed during a Bluetooth® Hands-freecall, switches call back to mobile phone (Private)• When pressed while calling on the mobile phone,switches call back to Bluetooth® Hands-free (operates only when Bluetooth® Hands-free is connected)• When pressed during a call, ends the phone call• When pressed in the incoming call screen, rejectsthe call※ The actual feature in the vehicle may differ from the illustration.
Starting the System for the First Time I 1-901Starting the System for the First TimeTurning the System On/OffPress the engine start button or set the ignition key to On or ACC. Each time you turn on the system, a boot logo and safety warning will appear.Pressing the power key on the head unit will display the safety guide. To change the system language between English, French, Spanish and Korean, select the Language button. NOTICE•  You cannot operate the system while it isbooting up. It may take some time for all offeatures of the system, particularly the voicerecognition system, to be ready for use.Pressing and holding the power key on the head unit will turn off the system. You can change Screen Saver Settings in Setup to display a clock on the Screen Saver.i Information •  If you turn off the system during a phone callusing the Hands-free feature, then the call willautomatically switch to your mobile phone.  NOTICE•  Check the volume when turning on thesystem. Before turning on the system, adjustthe volume to a reasonable level.System ResetThe System Reset function restores the system when it is not operating correctly. Press and hold the RESET key for a sec-ond or longer. (It is recommended that you press the RESET key using a tool, such as a pin or a clip.)K_UMa_UVO3[USA_EU]AV_PART1.indd   1-9K_UMa_UVO3[USA_EU]AV_PART1.indd   1-9 2016-01-27   오후 4:23:152016-01-27   오후 4:23:1
1-10 I BasicBattery Warning MessageAlways use the system while the car engine is running. If you turn on the sys-tem while the engine is off, a battery warn-ing message will appear. When the engine starts, the message will disappear.  NOTICE•  If you use the system for a long time withthe engine off, the battery may becomecompletely discharged.Restrictions on Features for Safety MeasuresSeveral features are limited while driving.The restriction screen will disappear when shifting gears into P or putting the parking brake on. WARNING- Blank Screen•  Refrain from use if the screen is blank orno sound can be heard as these signs mayindicate product malfunction. Continued use in such conditions could lead to accidents (fi res, electric shock). WARNING- Touching the Antenna During A   Thunder Storm •  Do not touch the antenna during thunder orlightning as such acts may lead to lightninginduced electric shock.K_UMa_UVO3[USA_EU]AV_PART1.indd   1-10K_UMa_UVO3[USA_EU]AV_PART1.indd   1-10 2016-01-27   오후 4:23:162016-01-27   오후 4:23:1
Starting the System for the First Time I 1-1101Home ScreenControls Menu Confi guration for the Home ScreenTap the   icon on any screen to display the Home Screen below.Features Description  Radio/MediaWidget• Shows brief information on the radio ormedia that is now playing.• Tap the area to move to the mode thatyou are listening to. ConnectivityWidgetShows any connected devices such as Android Auto, iPod, Pandora, and Bluetooth. All Menus Shows all of the items in the system menu. My Menu•You can add up to eight menus here.• Add your favorite menus to have quickand easy access to them. Apps/Info Moves to the Apps/Info screen. Setup Moves to the Setup screen.Information Display on the Status BarDisplays the date and time, along with the system status shown by the various icons to the right of the clock. The icons in the following table indicate the various types of sys-tem status details and events.Icon DescriptionDisplayed when the audio is muted.Displays the remaining battery of the Bluetooth phone.Displayed when connected to Bluetooth for handsfree.Displayed when connected to Bluetooth for streaming audio.Displayed when connected to Bluetooth for streaming audio and handsfree.Displayed when downloading contacts or recent calls from the Bluetooth phone.Displayed while on a call with the Bluetooth phone.Displayed when the microphone of the Bluetooth is muted.Displays the signal strength of the Bluetooth phone.Displayed when connected to Wi-Fi.Displayed when connecting to Wi-Fi.Displayed when 911 connect is available.K_UMa_UVO3[USA_EU]AV_PART1.indd   1-11K_UMa_UVO3[USA_EU]AV_PART1.indd   1-11 2016-01-27   오후 4:23:172016-01-27   오후 4:23:1
1-12 I BasicAdding Your Favorite Menu Items to My MenuFrom the Home screen, select My Menu icon, and then Edit .From the Edit My Menu screen, select menu items from the list on the right, then drag and drop them to a desired place on the left.To remove the item from My Menu, drag item from the left and drop them on the right.i Information• Up to eight items can be added to My Menu.On-Screen Touch ControlsLearn how to touch the screen to operate the system. SelectTap lightly on a menu or an item to select it.  NOTICE•  The system will not recognize your touch ifyou wear a glove or other non-conductivematerial. Touch the screen using your fi nger, an electrostatic touch-screen glove, or a stylus pen.Drag & DropSelect a menu or item you want, then drag and drop it to where you want to place it.Drag or touch the slider along the play bar in the music screens to jump to the point that you want to play from.i Information• Music screens for Disc CD and Disc MP3 do not support this function.K_UMa_UVO3[USA_EU]AV_PART1.indd   1-12K_UMa_UVO3[USA_EU]AV_PART1.indd   1-12 2016-01-27   오후 4:23:182016-01-27   오후 4:23:1
Starting the System for the First Time I 1-1301Drag the frequency bar to the left or right to move to the frequency that you want. From the Edit My Menu screen, drag and drop icons to add, delete, or move to/from My Menu.Flick (Quick Scrolling)Quickly moves up and down in the list. NOTICE•   Moving the list when there are many items will display a handler on the right of the display.You can easily move many items at a timewith the handlerYou can view the previous or next image by flicking left/right on an image on the USB Image screen.Flick left/right on the frequency bar in the radio player to look up the previous/next frequency available.K_UMa_UVO3[USA_EU]AV_PART1.indd   1-13K_UMa_UVO3[USA_EU]AV_PART1.indd   1-13 2016-01-27   오후 4:23:182016-01-27   오후 4:23:1
1-14 I BasicPress and HoldPressing the   and   buttons in the music player will fast forward/rewind the music.K_UMa_UVO3[USA_EU]AV_PART1.indd   1-14K_UMa_UVO3[USA_EU]AV_PART1.indd   1-14 2016-01-27   오후 4:23:202016-01-27   오후 4:23:2
FM/AMHD Radio™ TechnologySiriusXM™About DiscDisc CDDisc MP3USBiPodAUXBluetooth® AudioMy Musicpart.2 Radio/MediaK_UMa_UVO3[USA_EU]AV_PART2.indd   2-1K_UMa_UVO3[USA_EU]AV_PART2.indd   2-1 2016-01-27   오후 4:23:382016-01-27   오후 4:23:3
2-2 I Radio/MediaFM/AMYou can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home  screen.FM/AM Mode Display Controlsi Information•  If you press the RADIO key when power is off, the power will turn onand a radio broadcast will be tuned from the current mode.•  If you are in radio mode, select the media widget from the Home screento access the radio player.Features Description PresetFrequencies•The stored preset frequencies are displayedfor user selection.• After selecting frequency, press and holdthe preset button for more than 0.8 seconds.A beep sound will be heard and the frequencyis to be stored in the selected preset button.•Flick the preset frequencies up/down to scrollquickly through presets. Frequency Bar•Flick the frequency bar left/right to search foravailable radio channels to the left or right ofthe current channel.•Dragging: Drag the frequency bar to the left/right to find the radio channel that you want. Frequency Displays the current frequency. TagSaves the current music’s tag information to thehead unit. If connected to iPod, the tag informa-tion can be saved on the device.  Presets Shows the stored presets for user selection. SoundHoundRuns the SoundHound feature.For more details regarding this feature, refer to the SoundHound information in the Info section.  Menu• ListMoves to the frequency list.• InfoTurns the Radio text information transmittedfrom the broadcasting station on and off.• Preset ScanPlays preset frequencies for 10 seconds peritem.• Sound SettingsMoves to the Sound Settings.Radio/MediaK_UMa_UVO3[USA_EU]AV_PART2.indd   2-2K_UMa_UVO3[USA_EU]AV_PART2.indd   2-2 2016-01-27   오후 4:23:392016-01-27   오후 4:23:3
FM/AM I 2-302Features Description Scan/     Preset ScanDisplays an active mode from Scan and PresetScan modes. Band Changes to the desired band from among FM, AM, and SiriusXM.  HD Radio Used to set whether to turn HD Radio™ recep-tion On or Off.    Scan Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per item. SEEK/TRACK• When pressed quickly (less than 0.8 sec-onds): Seeks the previous/next frequency.• When pressed and held (more than 0.8 sec-onds): Moves quickly through all of the fre-quencies. The moment that you release thebutton, the system seeks the next availablefrequency. TUNETurn the  TUNE knob to manually seek avail-able frequencies.• FM: Increment/decrement by 200 kHz• AM: Increment/decrement by 10 kHzK_UMa_UVO3[USA_EU]AV_PART2.indd   2-3K_UMa_UVO3[USA_EU]AV_PART2.indd   2-3 2016-01-27   오후 4:23:402016-01-27   오후 4:23:4
2-4 I Radio/MediaIf an HD Radio™ broadcast is received, the radio mode will switch from analog broadcast to HD Radio™ broadcast.i Information•  The HD Radio™ screen is displayed onlywhen a HD Radio™ broadcast is beingreceivedProgram Service Data:   Contributes to the superior user experience of HDRadio™ Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.Adjacent traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, origi-nal music as well as deep cuts into traditional genre. Digital, CD-quality sound. HD Radio™ Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.HD Radio™ TechnologyK_UMa_UVO3[USA_EU]AV_PART2.indd   2-4K_UMa_UVO3[USA_EU]AV_PART2.indd   2-4 2016-01-27   오후 4:23:422016-01-27   오후 4:23:4
HD Radio™ Technology I 2-502Basic Mode Screen (HD Radio™ reception ON)Name Description HD Radio™ Reception & Channel buttonsDisplays main HD Radio™ channels and used to directly select the current available channels.  The HD Radio™ related icon display becomes active within regions where an HD Radio™ signal can be received. HD Channel Number Analog station and corresponding HD Radio™ channel number saved in the pre-set list. HD Broadcast InfoDisplays detailed information about the cur-rent broadcast (the details of the information shown are different depending on whether the Info button is selected) HD RadioWhen the HD Radio™ soft button is ON (the blue indicator on the HD Radio™ button is illuminated), HD Radio™ signals will be broadcast. K_UMa_UVO3[USA_EU]AV_PART2.indd   2-5K_UMa_UVO3[USA_EU]AV_PART2.indd   2-5 2016-01-27   오후 4:23:432016-01-27   오후 4:23:4
2-6 I Radio/MediaSiriusXM™You can access the radio player either by pressing the RADIO key or by selecting the Radio menu option from All Menus on the Home screen. Select the SiriusXM™ band from the radio player.SiriusXM™ Mode Display Controls i Information•  If you press the RADIO key when the power is off, the power will turnon and a radio broadcast will be tuned from the current mode.•  If you are in the SiriusXM™ mode, select the SiriusXM™ radio widgetfrom the Home screen to access the radio player.•  When the power is off, pressing the RADIO key will turn the power onand play a SiriusXM™ Radio broadcast.Features Description  Preset Frequencies•Shows the stored presets for user selection.• After selecting frequency, press and holdthe preset button for more than 0.8 seconds.A beep sound will be heard and the frequency is to be stored in the selected preset button. Channel Logo Displays the current channel logo. Channel Info Displays the current channel number and name. Content Info Displays the artist, title and other information about the current playing song. Category Info Displays the category of the currently playing song. Band Changes to the desired band from among FM,AM, and SirusXM. Direct Tune Used to search for the desired channel by entering the channel number. Scan Plays all receivable channels for 10 seconds per item. Category Lock If pressed, only the channels for the current cat-egory can be searched or scanned.  Category Selection ButtonsUsed to select the previous/next category. Play Live Switches to the live broadcast mode. Skip BackwardRepeats the previously broadcasted program.•Holding for less than 0.8 seconds: Moves tothe previous segment.•Holding for more than 0.8 seconds: Moves tothe previous 5 seconds.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-6K_UMa_UVO3[USA_EU]AV_PART2.indd   2-6 2016-01-27   오후 4:23:432016-01-27   오후 4:23:4
SiriusXM™ I 2-702Features Description Play/Pause Pauses/plays the current broadcasting program. Skip/Forward Moves to the next segment. TagSaves the current music’s tag information to the head unit. If connected to iPod, the tag informa-tion can be saved on the device. Presets Shows the stored presets for user selection. SoundHoundRuns the SoundHound feature.For more details regarding this feature, refer to the SoundHound information in the Info section. List Moves to the channel list. Menu•What is on My Presets?The program schedule saved in my preset. (For more details, see Section 2.5. Viewing Menu.)• Featured FavoritesTheme channels recommended by SiriusXM™. (For more details, see Section 2.5. Viewing Menu.)• Preset ScanPlays preset channels for 10 seconds each.• Sound SettingsMoves to the Sound Settings. SEEK/TRACK• When pressed quickly (less than 0.8 sec-onds): Plays the previous/next channel.•When pressed and held (more than 0.8 sec-onds): Continuously changes the channeluntil the key is released and plays the currentchannel. TUNE Changes the channel.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-7K_UMa_UVO3[USA_EU]AV_PART2.indd   2-7 2016-01-27   오후 4:23:442016-01-27   오후 4:23:4
2-8 I Radio/MediaSelecting through Channel/Category ListSelect the List ▶ Select the desired cat-egory and channel.Select the desired category and the chan-nel. Once selected, the previous screen will be restored and the selected channel will begin playing.If you select the Skip button, you can scan channels using the SEEK TRACK key or the  TUNE knob by skipping the channels that you chose to skip. Direct TuneEnter the number of the channel you want to receive.Viewing Menu Using the Menu button on the right, you can view the program schedule and infor-mation about the Featured Favorites pro-vided by SiriusXM™ .K_UMa_UVO3[USA_EU]AV_PART2.indd   2-8K_UMa_UVO3[USA_EU]AV_PART2.indd   2-8 2016-01-27   오후 4:23:452016-01-27   오후 4:23:4
SiriusXM™ I 2-902What is on My Presets? (Program Schedule)You can select Menu to see program information and the sched-ules of broadcast channels listed in the presets. Name Description ChangeBroadcast DateBy selecting this option, you can select a broad-casting date.Broadcast information will be provided for one week from the current date. PresetShows saved presets for user selection A total of 40 frequencies for SiriusXM™ modes can be displayed. ProgramInformationShows you the program titles to be broadcasted at the time that you have chosen.Select a program to see more details. If there is more information on the program you selected, an arrow button will be displayed on the right of the list. You can see more program information by selecting the arrow button.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-9K_UMa_UVO3[USA_EU]AV_PART2.indd   2-9 2016-01-27   오후 4:23:462016-01-27   오후 4:23:4
2-10 I Radio/MediaFeatured FavoritesFeatured Favorites feature allows SiriusXM™ to broadcast additional presets. • Example 1: "Martha's Favorites" mayrepresent Martha Stuart's favorites pre-sets on her radio. • Example 2: During holidays, "HolidayMusic" may represent all the SiriusXM™channels that are playing the holidaymusic for easy access by users. Multiple sets Featured Favorites data can be broadcast by SiriusXM™ and can change from time to time. K_UMa_UVO3[USA_EU]AV_PART2.indd   2-10K_UMa_UVO3[USA_EU]AV_PART2.indd   2-10 2016-01-27   오후 4:23:472016-01-27   오후 4:23:4
About Disc I 2-1102About Disc Precautions upon Handling Discs CAUTION•  After using a disc, put the disc back in itsoriginal case to prevent disc scratches.•  Do not use abnormally shaped discs (8cm,heart-shaped, octagon-shaped) as such discs could lead to errors.•  Do not clean discs with chemical solutions,such as record sprays, antistatic sprays,antistatic liquids, benzene, or thinners.•  Do not expose the disc to direct sunlight orhigh temperatures for prolonged periodsof time. Such exposure may lead to discdeformation.•  Upon playing a disc contaminated by dirtor other substances, the sound quality maydeteriorate and result in skipping sounds.Writing on either side of the disc could resultin damage to disc surfaces.•  Clean fingerprints and dust off the discsurface (coated side) with a soft cloth.•  Copy-protected CDs, such as S-type CDs,may not properly operate in the device. DATACDs cannot be played. (However, such discsmay still abnormally operate.)•  Do not disassemble the device. Contact adesignated service center in case of problems. (Complete after service assistance will not beprovided if the user disassembles the device.)•  Do not use water to clean the device.Exposure to water could lead to productdamage.•  Do not introduce foreign substances intothe disc insert/eject slot. Introducing foreignsubstances could damage the device interior.•  The device may not properly operate inextremely hot or cold temperatures. (Theoperating temperature range is: 14˚F ~ 150˚F)•  Steam can become condensed on thefi beroptic lens due to rain, wet conditions, orupon operating the heating system. In suchcases, discs may not be properly recognized. Remove the disc and wait until the moisturedries.•  Skipping may occur during audio play whendriving on bumpy roads for prolonged periodsof time or upon severe shock to the vehicle. In case of severe shock, audio may not properlyplay.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-11K_UMa_UVO3[USA_EU]AV_PART2.indd   2-11 2016-01-27   오후 4:23:472016-01-27   오후 4:23:4
2-12 I Radio/MediaSupported Disc FormatsThis device supports the following disc for-mats. Disc Type Disc Type Disc Format Device SupportCD3inch (8cm) 5inch (12cm) CD CD-R CD-RW Multisession-CDXOOO (Read Only) O (Read Only) O (Read Only) SACDSACD (Single, SACD layer) SACD (Hybrid) X  X (Only CD layer)Disc Format Disc Type Disc Format Device SupportCD CD-DAMP3 WMA MPEG4 AAC DTS-CD CD-ROM CD-G CD-EXTRA CD-TEXT OO O X X O XOO Disc/Content Format CompatibilityBy Format according to Disc Type Disc Type Disc Format Device SupportCD LPCMOMP3MPEG1, Layer3 MPEG2, Layer3 MPEG2.5 OOOWMA Ver9OOrdinary Disc CompatibilityThis device has been designed/manufac-tured to be compatible with software bear-ing the following logo marks.        •  CD-R/RW discs (Audio CD) created with CD recording devices or PCs may not properly operate in the device. This is a result of various causes, including disc format, recording method, and contami-nation to the disc or lens.$XGLR&'K_UMa_UVO3[USA_EU]AV_PART2.indd   2-12K_UMa_UVO3[USA_EU]AV_PART2.indd   2-12 2016-01-27   오후 4:23:472016-01-27   오후 4:23:4
About Disc I 2-1302CD-R/RW Compatibility• This device supports CD-R, CD-RW,and MP3 discs burned in Audio CD for-mats.• The recording of CD-R and CD-RWdiscs with this device is not supported.• CD-R/RW discs recorded as audio CDsthat were not finalized are not supportedby this device.PC-created Disc Compatibility • When burning a disc on a PC, the discmay not operate in this device depend-ing on the software settings. In suchcases, inquire with the software manu-facturer.• Additional information regarding com-patibility is displayed on the CD-R/RWsoftware disc box.•DVD-R/W discs are not compatible withthis device.Cautions upon Writing CDs• When a multi-session disc is beingrecorded, make sure to close the ses-sion before recording. • If MP3/WMA file extensions arechanged, such could result in errors.• In the case of MP3/WMA, write usingonly English. (Other languages are notsupported)•Unauthorized use of copy-protectedmusic files is prohibited by law.• Prolonged use of CD-R/CD-RW prod-ucts that do not satisfy related specifica-tions may result in abnormal operation.•When writing CDs, low-speed writing isrecommended.Compressed Audio Compatibility • Physical formats of CD: Model 1, Model2 XA format 1. • This device supports audio file com-pressed through MPEG-1 audio streamlayer 3 (MP3) using 8kbps ~ 320kbps.(CBR or VBR)• For stable operation, the use of filesin 95kbps~192kbps bit rate range and44.1kHz SAMPLING frequency is rec-ommended.• This device supports WMA audio filesusing 20kbps ~ 320kbps. (CBR or VBR)• Variable bit rate files may operate, butthe play time information may not beproperly displayed.•This device only supports tracks with fileextension of “.mp3” or “.wma”.• This device does not support multises-sion discs.•This device supports only 8 layer folders.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-13K_UMa_UVO3[USA_EU]AV_PART2.indd   2-13 2016-01-27   오후 4:23:482016-01-27   오후 4:23:4
2-14 I Radio/Media• This device supports MP3 ID3 tag ver-sions of Ver. 1.0, Ver. 1.1, Ver. 2.2, Ver.2.3, Ver. 2.4. When using discs withother versions, the ID3 info will not bedisplayed.• Although this device has been desig-nated to be compatible with various bitrates, playing low bit rate MP3 tracksmay result in low quality sound.Before Playing an MP3 DiscSupported MP3 File Specifi cation• Acceptable standard: MPEG1 AudioLayer 3.• Acceptable sampling frequency: 8,11.025, 12, 16, 22.05, 24, 32, 44.1,48(KHz).• Acceptable bit rate: 8 ~ 320 (Kbps).Recommended Bit Rates and Frequency  • Sampling frequency: 96 ~ 192 Kbpsfixed bit rate/44.1 kHz. NOTICE•  Supported ID3 tags: ID3v1.0, ID3v1.1,ID3v1.2, ID3v2.2, ID3v2.3, ID3v2.4. •  Supported MP3 Media: CD-ROM.•  Supported media formats: ISO9660 LEVEL1and LEVEL2.Detailed Specifi cation• Maximum directory layers: 8 layers.• Maximum folder length: 64 bytes, filename length: 64 bytes.•Supported characters for folder name/filename: 2350 characters for Alphanumericcharacter and Korean character sets,4888 characters for Simplified Chinesecharacter set.•Maximum number of folders per disc: 256folders. (including ROOT)• Maximum number of files per disc: 512files.Precautions upon Burning MP3 Files  • The use of ISO 9660 LEVEL 2 JOLIETformat is recommended.•Up to 32 characters in Korean/Chineseare supported for file names and up to20 characters in Korean/Chinese aresupported for folder names.•The use of CDs exceeding 700MB mayresult in faulty disc recognition or errorsupon play.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-14K_UMa_UVO3[USA_EU]AV_PART2.indd   2-14 2016-01-27   오후 4:23:482016-01-27   오후 4:23:4
About Disc I 2-1502MP3 File StructureRecognition occurs through the same folder structure used within the disc. Folder structure as saved in CD-ROM Folder structure as saved in the systemK_UMa_UVO3[USA_EU]AV_PART2.indd   2-15K_UMa_UVO3[USA_EU]AV_PART2.indd   2-15 2016-01-27   오후 4:23:482016-01-27   오후 4:23:4
2-16 I Radio/MediaDisc CDCD Mode Display ControlsName Description Mode Displays current operating mode Track Index Shows the current track/total tracks  Repeat/ Shuffle/Scan From Repeat/Shuffle/Scan, displays the currently operating function Play Time  Displays the current play time Play Info Displays track/artist/title/album information  Previous Tra ck• When the play time is under 3 seconds theprevious track•When the play time is over 3 seconds currentsong from the beginning Play/Pause  Plays/pauses the current track Next Track  Moves to the next track RepeatRepeats the current track Select the Repeat button to switch between repeat-ing the current track   → and turning repeat off Shuffle Plays disc tracks in random orderSelect the Shuffle button to switch between shuf-fle all   → and turning shuffle off ScanScans the beginning parts of disc tracks (approx. 10 seconds per track) Select the Scan button to switch between scan all   → and turning scan off   List  Moves to the track list screen K_UMa_UVO3[USA_EU]AV_PART2.indd   2-16K_UMa_UVO3[USA_EU]AV_PART2.indd   2-16 2016-01-27   오후 4:23:482016-01-27   오후 4:23:4
Disc CD I 2-1702Name Description SoundHoundRuns the SoundHound feature.For more details regarding this feature, refer to the SoundHound information in the Info section. Menu Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. SEEK/TRACK•If button is pressed quickly (less than 0.8 sec-onds), it moves to previous or next track• If button is pressed and held (more than 0.8seconds), it rewinds or fast-forward the track  When button pressed for 5 seconds, it will rewind or fast-forward the track at 4x speed. After that, it will rewind or fast-forward at 20x speed. Once released, the track will begin playing at normal speed. TUNETurn the   TUNE knob and search a desired track. When the track name is displayed, press the   TUNE knob to play the track.  If the   TUNE knob is not pressed within  5 seconds of searching tracks, the track info  for the current track is restored.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-17K_UMa_UVO3[USA_EU]AV_PART2.indd   2-17 2016-01-27   오후 4:23:502016-01-27   오후 4:23:5
2-18 I Radio/MediaName Description Current Track Displays current playing track name  Back Button Converts to basic mode screen MenuWhen moving to a different list screen, moves to the list page where the current file is located(Becomes disabled when the current list includes the current file) SEEK/TRACK• If button is pressed (less than 0.8 seconds):Plays previous/next track• If button is pressed (more than 0.8 seconds):Moves to play screen, and then it will rewind orfast-forward the track. It will play the track nor-mally if it is released. TUNETurn the   TUNE knob to move the focus to the next/previous track. If the desired track is selected, press the   TUNE knob to play the track.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-18K_UMa_UVO3[USA_EU]AV_PART2.indd   2-18 2016-01-27   오후 4:23:512016-01-27   오후 4:23:5
Disc MP3 I 2-1902Disc MP3MP3 Mode Display ControlsName Description Mode Displays current operating mode File Index Shows the current MP3 file/total number of MP3 files  Repeat/ Shuffle/ScanFrom Repeat/Shuffle/Scan, displays the current operating function Play Time Displays the current play time Song Info Displays folder/file/artist/title/album info for current song List Moves to the list screen Previous File•If play time is less than 3 secs, moves to previ-ous file•  If play time is more than 3 secs, play the current file from the beginning Play/Pause Plays/pauses the current track Next File Moves to the next song RepeatRepeats the current song or all songs in the folder. Select the Repeat button to switch between repeating 1 song   → repeating folder   → and turning repeat off  Repeat 1 song: Repeats the current song       Repeat Folder: Repeats songs in the folderK_UMa_UVO3[USA_EU]AV_PART2.indd   2-19K_UMa_UVO3[USA_EU]AV_PART2.indd   2-19 2016-01-27   오후 4:23:522016-01-27   오후 4:23:5
2-20 I Radio/MediaName Description ShufflePlays files in the folder or in the disc in random order. Select the Shuffle button to switch between shuffle folder   → shuffle all → and turning shuffle off  Shuffle folder: Plays songs in the folder in random order      Shuffle All: Plays songs in the disc in random order.  Scan Scans the beginning parts of MP3 files (approx. 10 seconds per file)Select the Scan button to switch between scan folder   → scan all   → and turning scan off   Scan Folder: Scans tracks in the current folder     Scan All: Scans all tracks in the disc SoundHoundRuns the SoundHound feature.For more details regarding this feature, refer to the SoundHound information in the Info section. Menu Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. SEEK/TRACK• If button is pressed (less than 0.8 seconds):Plays previous/next track•If button is pressed (more than 0.8 seconds):Moves to play screen, and then it will rewindor fast-forward the track. TUNETurn the   TUNE knob to search a desired track. If the desired track is displayed, press the  TUNE knob to play the track.  If the   TUNE knob is not pressed within  5 seconds of searching tracks, the track info  for the current track is restored.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-20K_UMa_UVO3[USA_EU]AV_PART2.indd   2-20 2016-01-27   오후 4:23:522016-01-27   오후 4:23:5
Disc MP3 I 2-2102Name Description Folder Name  Displays folder name for current file Current Song Displays currently playing file name Back Button Converts to basic mode screen Upper Folder Moves to Root Folder  MenuWhen moving to a different list screen, moves to the list page where the current file is located(Becomes disabled when the current list includes the current file) SEEK/TRACK• If button is pressed (less than 0.8 seconds):Plays previous/next track• If button is pressed (more than 0.8 seconds):Moves to play screen, and then it will rewind orfast-forward the track. TUNETurn the   TUNE knob to move the focus to the previous/next track. If the desired track is displayed, press the   TUNE knob to play the track.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-21K_UMa_UVO3[USA_EU]AV_PART2.indd   2-21 2016-01-27   오후 4:23:532016-01-27   오후 4:23:5
2-22 I Radio/MediaUSBBefore Playing a USB MP3Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.•Files that are not standard format music/image files will not beplayed.• For MP3/WMA/OGG files, only music files with compressionrates between 8Kbps ~ 320Kbps can be played.•Heed caution to static electricity when connecting/disconnectingexternal USB devices.• Encoded MP3 Players will not be recognized when connectedas an external device.•When connecting an external USB device, the device may notproperly recognize the USB is in some states.•Only products formatted with byte/sectors under 64Kbyte will berecognized.•USB devices, formatted to the FAT12, FAT16, or FAT32 file sys-tem, are recommended. File systems other than FAT12, FAT16,FAT32, exFAT, and NTFS are not supported.•Some USB devices may not be supported due to compatibilityissues.•Take caution so that the USB connector does not come in con-tact with body parts or objects.•Repeated connecting/disconnecting of USB devices within shortperiods of time may result in product malfunction.•Make sure to connect/disconnect external USB devices with theaudio power turned off.• The amount of time required to recognize the external USBdevice may differ depending on the type, size, or file formatsstored on the USB.•The use of USB devices for purposes other than playing musicand image files is prohibited. •Do not use the USB I/F to charge batteries or USB accessoriesthat generate heat. Such acts may lead to worsened perfor-mance or damage to the device.• The device may not recognize the USB device if separatelypurchased USB hubs and extension cables are being used.Connect the USB directly with the multimedia terminal of thevehicle.• When using mass storage USB devices with separate logicaldrives, only files saved to the root drive can be played.•When application programs are installed to specific USBs, filesmay not properly play.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-22K_UMa_UVO3[USA_EU]AV_PART2.indd   2-22 2016-01-27   오후 4:23:532016-01-27   오후 4:23:5
USB I 2-2302• The device may not operate normally if MP3 Players, cellu-lar phones, digital cameras, or other electronic devices (USBdevices not recognized as portable disk drives) are connectedwith the device.• Charging through the USB may not work for some mobiledevices.• The device may not support normal operation when using aUSB memory type besides Metal Cover Type USB Memory.•The device may not support normal operation when using for-mats such as HDD Type, CF, or SD Memory.• When playing iPods, please use a dedicated iPod car cable. •Normal operation cannot be guaranteed when other cables arebeing used.•The device will not support files locked by DRM. (Digital RightsManagement)• USB memory sticks used by connecting an Adaptor (SD Type orCF Type) may not be properly recognized.•Only use Plug type connector products, as shown in the figurebelow.• To play USB MP3, the USB device must be connected to theUSB port in the front multibox. The USB port in the center con-sole storage (if equipped) is for charging only.Product Name  Manufacturer XTICK LGBMK BMK TechnologySKY-DRV Sky DigitalTRANSCEND JetFlash  Transcend Sandisk Cruzer  SanDisk Micro ZyRUS  ZyRUS NEXTIK Digiworksi Information•   Problems that occur through use of USB devices not listed within theabove table are not covered by the product warranty.Plug Type ConnectorK_UMa_UVO3[USA_EU]AV_PART2.indd   2-23K_UMa_UVO3[USA_EU]AV_PART2.indd   2-23 2016-01-27   오후 4:23:542016-01-27   오후 4:23:5
2-24 I Radio/MediaSupported USB MP3 music specifi cationsName DescriptionMP3 File Specification  Specification: MPEG1 AUDIO LAYER 3Recommended Bit Rates and Sampling FrequencyAcceptable sampling frequency: 32, 44.1, 48 (kHz)Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps)96, 128, 192 Kbps fixed bit rate/44.1kHzID3 Tag  Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.4 ID3 tagsDetailed Specifications Maximum directory layers: 20 layersMaximum length of folder name/file name: 255BytesSupported characters for folder name/file name: Alphanumeric characters, Korean standard charac-ter set 2,350 characters, Simplified Chinese 4888 charactersMaximum number of folders which can be stored onto one USB: 2000 folders (including ROOT) Maximum number of files which can be stored ontoone USB: 8000i Information•  The sound quality of MP3 files that use bitrates exceeding192 Kbps cannot be guaranteed. When using fi les without fi xed bit rates,some features (FF/REW features) may not properly operate.Supported Image Specifi cationsName DescriptionImage format JPG, GIF, BMP, PNG (animated GIF, etc. are not supported)Supported image resolution5M pixels for JPG, BMP, PNG (1M pixels maximum for GIF)Supported image file size5M pixels for JPG, BMP, PNG (1M pixels maximum for GIF)K_UMa_UVO3[USA_EU]AV_PART2.indd   2-24K_UMa_UVO3[USA_EU]AV_PART2.indd   2-24 2016-01-27   오후 4:23:592016-01-27   오후 4:23:5
USB I 2-2502USB Mode Display ControlsFeatures Description Mode Displays the current operating mode File Index Shows the current file/total files within the USB  Repeat/ Shuffle/ScanFrom Repeat/Shuffle/Scan, displays the current operating function Play Time Displays the current play time/total play time Song InfoDisplays the information of the current track•When a track in the file tab on the list screenis selected: Displays folder, file, title, artist, album info•  When a track in the other tabs on the list screen is selected: Displays artist, title, album info List Moves to the list screen Back Button  Converts to basic mode screenFeatures Description Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)•If play time is less than 3 seconds, moves toprevious file•If play time is more than 3 seconds, play thecurrent file from the beginningIf button is pressed (more than 0.8 seconds) it rewinds the track Play/Pause Plays/pauses the current file Next File• If button is pressed (less than 0.8 seconds):Moves to the next file•If button is pressed (more than 0.8 seconds):It fast-forwards the track RepeatRepeats the current file• If select the song in the file tab on the listscreen: Select the Repeat button to switch between repeating one song  , repeating folder  , and turning repeat off• If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeat-ing one song   and turning repeat off  ShufflePlays files in random order• If select the song in the file tab on the listscreen: Select the Shuffle button to switch between Shuffle Folder  , Shuffle All  , and turning shuffle off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Shuffle button to switch between Shuffle Category   and turning shuffle off K_UMa_UVO3[USA_EU]AV_PART2.indd   2-25K_UMa_UVO3[USA_EU]AV_PART2.indd   2-25 2016-01-27   오후 4:23:592016-01-27   오후 4:23:5
2-26 I Radio/MediaFeatures Description ScanScans the beginning parts of USB files (approx. 10 seconds per file)• If select the song in the file tab on the listscreen: Select the Scan button to switch between Scan Folder  , Scan All  , and turning scan off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Scan button to switch between Scan category   and turning scan off Features Description Menu • Add to Playlist: Add the current track to thePlaylist: Playlist is placed on the left tab in thelist•Save to My Music: You can save the currenttrack to My Music. You can play saved trackfrom My Music without USB. Access to MyMusic in the Media mode.•Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of thesound. SoundHoundRuns the SoundHound feature.For more details regarding this feature, refer to the SoundHound information in the Info section. SEEK/TRACKIf button is pressed (less than 0.8 seconds) moves to previous/next file or play the current track from the beginning •If play time is less than 3 seconds, moves toprevious/next file•If play time is more than 3 seconds, play thecurrent file from the beginningIf button is pressed (more than 0.8 seconds) it will rewind/fast-forward the track TUNETurn the  TUNE knob to search a desired track. If the desired track is displayed, select the  TUNE knob to play the track.  If the  TUNE knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-26K_UMa_UVO3[USA_EU]AV_PART2.indd   2-26 2016-01-27   오후 4:24:002016-01-27   오후 4:24:0
USB I 2-2702Features Description  Folder/  Category Name Displays folder/category name in the list Current Song Displays the current playing file name Back Button Converts to basic mode screen   Upper Folder/     Category Moves to Upper FolderFeatures Description Menu • Add to Playlist: Adds the current track to thePlaylist: Playlist is placed on the left tab in thelist (Maximum 100 files) Select a desired trackand press “Add to Playlist” to add the track inthe playlist.•Delete from Playlist: Select a track you want todelete from the playlist and press “Delete fromPlaylist” to delete the track in the playlist•Now Playing: When moving to a different listscreen, moves to the list page where the cur-rent file is located (Becomes disabled whenthe current list includes the current file)• Save to My Music: Stores the music. Thestored music can be played in My Music. (Thisfunction is not provided in Playlist.) Search MenuSearch tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album.   If access the search menu while playing a  track, it moves to the previous search mode.  SEEK/TRACKIf button is pressed (less than 0.8 seconds): Plays previous/next track• If play time is less than 3 seconds, moves toprevious/next file• If play time is more than 3 seconds, play thecurrent file from the beginningIf button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewind or fast-forward the track. It will play the track nor-mally if button released.  TUNETurn the  TUNE knob to move the focus to the previous/next list. If the desired track is displayed, press  TUNE knob to play the track.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-27K_UMa_UVO3[USA_EU]AV_PART2.indd   2-27 2016-01-27   오후 4:24:012016-01-27   오후 4:24:0
2-28 I Radio/MediaUSB ImageFeatures Description Mode Displays the current operating mode  Folder/File  Name  Displays folder name where image is located File Index  Shows the current file/total files within the USB Slideshow  Images as slideshow in 5, 10, 20, 30 second intervals Rotate  Rotate image in clockwise direction Info Shows the file name, resolution and file type of current image  Adjust Image Size Enlarge/reduce (zoom-in/zoom-out) image size List Moves to the list screen  Previous/  Next imageSwipe image left or right to see Previous/Next imageK_UMa_UVO3[USA_EU]AV_PART2.indd   2-28K_UMa_UVO3[USA_EU]AV_PART2.indd   2-28 2016-01-27   오후 4:24:022016-01-27   오후 4:24:0
USB I 2-2902Features Description Current File Displays the current playing file name Back Button Converts to basic mode screen MenuNow Playing: When moving to a different list screen, moves to the list page where the current file is located (Becomes disabled when the cur-rent list includes the current file)   SEEK/TRACKControls background mode•  Radio mode: Changes Frequency and Channel•Media mode: Changes Track (excluding AUX) TUNEControls background mode•  Radio mode: Changes Frequency and Channel• Media mode: Changes track (excluding AUX).If a desired track is displayed, press the knobto move to the track.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-29K_UMa_UVO3[USA_EU]AV_PART2.indd   2-29 2016-01-27   오후 4:24:032016-01-27   오후 4:24:0
2-30 I Radio/MediaiPodUsing iPod Devices • iPod is a registered trademark of AppleInc.•iPod mode will not operate if the con-nected iPod cannot be recognized dueto operation of unsupported versionsthat do not support related protocols,iPod abnormalities, or iPod devicedefects. Some iPods with unsupportedcommunication protocols may not prop-erly operate with the Multimedia system.• For fifth generation iPod Nano devices,the iPod may not be recognized whenthe battery level is low. Please chargethe iPod for use. • Search/play orders shown within theiPod device may differ with the ordersshown within the Multimedia system.•If the iPod malfunctions due to an iPoddevice defect, reset the iPod and tryagain. (To learn more, refer to your iPodmanual)• If repeatedly connect and disconnectiPod/iPhone to the Multimedia systemwith USB cable in a short time, it maycause abnormal operation. •The time for recognition of iPod/iPhonemay vary depending on device type,firmware version and iOS version.• For some iPod Touch and iPhonedevices, connecting Bluetooth® while theiPod is operating may result in discon-tinued iPod sound. When such deviceswith Bluetooth® support are connected,this problem occurs as the sound sourceis changed from the Dock Connector(USB connector cable) to Bluetooth.• To prevent this symptom, BluetoothAudio function in the Multimedia systemis limited if iPod/iPhone is connectedto the system through both cable andBluetooth. To listen to the iPod sound,use either iPod menu with USB connec-tion or Bluetooth Audio with Bluetoothconnection.• To listen to the iPod sound, reconnectthe USB cable or change the audio out-put settings in iPod/iPhone to Dock.•In order to use the iPod while operatingthe keys, you must use a dedicated iPodcable. (the cable that is supplied whenpurchasing iPod/ iPhone products)※ During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/iPhone product.) will charge the iPod through the head unit.※ ※ The use of genuine iPod cables sup-The use of genuine iPod cables sup-plied by Apple is recommended. (The plied by Apple is recommended. (The use of other products may result in use of other products may result in noise or abnormal operation.)noise or abnormal operation.)※ To play iPod music through cable con-nection, the iPod/USB cable must be connected to the USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-30K_UMa_UVO3[USA_EU]AV_PART2.indd   2-30 2016-01-27   오후 4:24:032016-01-27   오후 4:24:0
 iPod I 2-3102• When connecting with the iPod cable,make sure to fully insert the jack to pre-vent communication interference. If theiPod is connected to the vehicle while itis playing, a high pitch tone may soundfor about 1~2 seconds immediately afterconnection. If possible, connect the iPodto the vehicle with the iPod stopped/paused.• Within iPhones, streaming audio andiPod control may occasionally conflict.If problems persist, remove the iPhoneand connect again.•When connecting to iPod Nano /Classic,the Kia Motor logo appears on the Appledevice. For the iPod Nano 6 genera-tion, however, the logo image does notappear since it is not supported. Also, alliPhone and iPod Touch products do notsupport this function.• In Apple’s iOS 6.0 version or later,Podcast and Audiobook media filesare designed to be played with thePodcasts and iBooks applications spe-cifically designed for Apple products. Ifthe Apple device does not provide thePodcast and Audiobook lists, the playlistmay not be displayed and played in theiPod mode.• If the Apple Podcasts and iBooks appsare not installed on the Apple device, butthe Apple device provides the Podcastand Audiobook lists, you can play files inother categories in iPod mode.• The screen of multimedia system canbe different when you run other musicplayers (e.g. iHeartRadio) on your con-nected device.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-31K_UMa_UVO3[USA_EU]AV_PART2.indd   2-31 2016-01-27   오후 4:24:032016-01-27   오후 4:24:0
2-32 I Radio/Media Caution• While using a connected iPhone/iPodTouch device, it may not operate nor-mally if the user changed some func-tions in the device.• When calling with an iPhone connec-tion, song may stop playing due to anApple device feature. If sound doesnot resume after the call is terminated,check the device status. •If lots of songs have the same informa-tion, skipping may occur when previous/next song is executed due to an Appledevice feature. Also problems mayoccur depending on device type or iOSversion.• If lots of songs have the same informa-tion, the song that plays may be differ-ent between the system and the Appledevice. Reset the device or delete thesame songs in the Apple device usingiTunes. • If you control pause, repeat, shuffle, orseek songs when the play time is lessthan 3s before the song is finished play-ing, it may occur difference of playingsong between the Multimedia systemand Apple device. Access to iPod musicfrom another mode or pause a song andthen play a song again in Apple device. •We recommend that your Apple deviceuses the latest firmware since someproblems may occur due to an outdatedfirmware or other software relatedissues. Type 1G 2G 3G 4G 5G 6G 6.5G 7GiPod Mini Not SupportediPod Shuffle Not SupportediPod Nano ○ ○ ○○○ ○Not released ○iPod Touch○(iOS 1.1 not sup-ported)○ ○○○ Not releasediPad ○ (Unable to charge, Not verified, Normal working not guaranteed)iPad Mini ○ (Unable to charge, Not verified, Normal working not guaranteed)iPod Classic  Not Supported ○(iPod with Video)○(iPod Classic)○(iPod Classic)Not releasedType 3G 3GS 4 4S 5 5C 5S 6 6+iPhoneNot verified, Normal working not guaranteed○○○○○○○○K_UMa_UVO3[USA_EU]AV_PART2.indd   2-32K_UMa_UVO3[USA_EU]AV_PART2.indd   2-32 2016-01-27   오후 4:24:032016-01-27   오후 4:24:0
 iPod I 2-3302 Caution• If the iPhone/iPod Touch supportsBluetooth, the Apple device will not beable to use the Bluetooth function if thedevice is connected through both theUSB port and via Bluetooth. Disconnectthe USB connection then use BluetoothAudio• If iPod/iPhone connected to theMultimedia system through both USBand AUX. iPod/iPhone keeps outputsound via AUX, thus it may occur soundwill not output in iPod mode.• If AUX cable connected to iPod/iPhonebut not connect to the Multimedia sys-tem, it may occur sound will not outputin iPod mode due to iPod/iPhone’s fea-ture. Especially, if you use AUX cablelike pictures, this problem may occur. •Disconnect AUX cable from iPod/iPhonefirst, then connect to the Multimediasystem via USB. Or change settings to“Dock” in iPod/iPhone.• If connect to the Multimedia systemwhile podcast or iTunes music down-loading to iPod/iPhone, it may occursome problems when you select songin the list. Reconnect iPod/iPhone to theMultimedia system when downloadingis finished or the file deleted.• If connect to the Multimedia systemwhile sync, it may occur some problems. Try to use iPod/iPhone connection aftersync complete. (To learn more, refer toyour iPod manual)• iPhone and iPod Touch devices areguaranteed to work normally on iOS 8.2or below. However, they may not worknormally on future iOS versions as theiroperations have not yet been tested.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-33K_UMa_UVO3[USA_EU]AV_PART2.indd   2-33 2016-01-27   오후 4:24:042016-01-27   오후 4:24:0
2-34 I Radio/MediaiPod Mode Display Controls Features Description Mode   Displays the current operating mode  Song Index Shows the current song/total songs Repeat/Shuffle From Repeat/Shuffle, displays the current oper-ating function  Play Time  Displays the current play time/total play time Song Info Displays the artist/song title/album info List Moves to the list screenFeatures Description Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)•If play time is less than 3 seconds, moves toprevious file•If play time is more than 3 seconds, play thecurrent file from the beginningIf button is pressed (more than 0.8 seconds) it rewinds the track. Play/Pause Plays/pauses the current file Next File• If button is pressed (less than 0.8 seconds),Moves to the next file•If button is pressed (more than 0.8 seconds),it does fast-forward the track. Repeat Repeats the current fileSelect the Repeat button to switch between repeat-ing 1 track  , and turning repeat off  ShufflePlays files in random orderWhen pressing Shuffle button, it changes to shuffle category   → deactivate shuffle then repeat • Shuffle Category: Shuffle song in the currentcategory Back Button  Move to home/previous mode screen SoundHoundRuns the SoundHound feature.For more details regarding this feature, refer to the SoundHound information in the Info section. Menu Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-34K_UMa_UVO3[USA_EU]AV_PART2.indd   2-34 2016-01-27   오후 4:24:042016-01-27   오후 4:24:0
 iPod I 2-3502Features Description SEEK/TRACKIf button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning • If play time is less than 3 seconds, moves toprevious/next file• If play time is more than 3 seconds, playsthe current file from the beginningIf button is pressed (more than 0.8 seconds) it will rewind/fast-forward the track TUNETurn the  TUNE knob to search a desired track. If the desired track is displayed, press the  TUNE knob to play the track.  If the  TUNE knob is not pressed within 5 seconds of searching tracks, the track infofor the current track is restored.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-35K_UMa_UVO3[USA_EU]AV_PART2.indd   2-35 2016-01-27   오후 4:24:052016-01-27   오후 4:24:0
2-36 I Radio/MediaFeatures Description Category Name Displays the category name  Category ListDisplays the contents of selected category   If there are many items in the list, items are  added in order and the scroll bar on the right is adjusted accordingly. Back Button Converts to basic mode screen Upper Folder Moves to Upper Folder Search MenuSearch tracks by the list type. Search songs according to Playlist, Artist, Song, Album, Genre, Composer, Podcast and Audiobook .  If access the search menu while playing a track, it moves to the previous search mode.    SEEK/TRACKIf button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning • If play time is less than 3 seconds, movesto previous/next file• If play time is more than 3 seconds, playsthe current file from the beginningIf button is pressed (more than 0.8 seconds) it will rewind/fast-forward the track. TUNETurn the  TUNE knob to search a desired track. If the desired track is displayed, press the  TUNE knob to play the track.If you do not anything with the knob for 5 seconds, the  TUNE knob search will be terminated.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-36K_UMa_UVO3[USA_EU]AV_PART2.indd   2-36 2016-01-27   오후 4:24:052016-01-27   오후 4:24:0
AUX I 2-3702AUXConnecting an External DeviceIf an external device connector is con-nected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored.• AUX mode can be used only when anexternal audio player has been con-nected.•The AUX volume can also be controlledseparately through the connecteddevice. NOTICE•If only a cable is connected to the AUXwithout an external device, the mode willbe changed to AUX, but noise may occur.When an external device is not beingused, remove the connector jack.•When the external device power isconnected to the power jack, playing theexternal device may output noise. In suchcases, disconnect the power connectionbefore use.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-37K_UMa_UVO3[USA_EU]AV_PART2.indd   2-37 2016-01-27   오후 4:24:062016-01-27   오후 4:24:0
2-38 I Radio/MediaBluetooth® AudioBluetooth Audio Mode Display Controls Features Description Mode Displays the current operating mode Phone Name  Displays name of connected phone  Artist Info Name of current artist  Title Name of current song  Previous File• If play time is less than 3 seconds, moves tothe previous file•If play time is more than 3 seconds, plays thecurrent file from the beginning  This function may differ depending on themodel of mobile phone Play/Pause Plays/Pauses Bluetooth Audio Next File Moves to the next file Menu•Connections: Moves to the Bluetooth Settingsscreen. You can pair a new device or change/delete paired device(s).•Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of thesound. SoundHoundRuns the SoundHound feature.For more details regarding this feature, refer to the SoundHound information in the Info section. SEEK/TRACK Plays the previous/next file TUNE  TUNE is not supported. i Information•  Artist info and Title may not be supported by mobile phoneK_UMa_UVO3[USA_EU]AV_PART2.indd   2-38K_UMa_UVO3[USA_EU]AV_PART2.indd   2-38 2016-01-27   오후 4:24:072016-01-27   오후 4:24:0
Bluetooth® Audio I 2-3902Bluetooth Connections SettingsSettings for pairing, connection and dis-connection of a Bluetooth device• In Bluetooth Audio play screen, selectMenu and then Connections.i Information•If the music in the mobile phone is notplayed after changing to audio streamingmode, press the play button. Thus check ifthe music is playing in the Bluetooth deviceafter changing to audio streaming mode.Audio streaming may not be supported forsome mobile phones. •Please check the Bluetooth compatibilityin below website: KIA Motors Corporationhttp://www.kia.comK_UMa_UVO3[USA_EU]AV_PART2.indd   2-39K_UMa_UVO3[USA_EU]AV_PART2.indd   2-39 2016-01-27   오후 4:24:072016-01-27   오후 4:24:0
2-40 I Radio/MediaMy MusicMy Music Mode Display ControlsFeatures Description Mode Displays the current operating mode File Index Shows the current file/total files  Repeat/ Shuffle/ScanFrom Repeat/Shuffle/Scan, displays the cur-rent operating function Play Time Displays the current play time/total play time Song InfoDisplays the information about the current track•  When a track in the file tab on the list screen is selected: Displays file, artist, title, album info• When a track in the other tab on the listscreen is selected: Displays artist, title, album infoFeatures Description List Moves to the list screen Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)•If play time is less than 3 seconds, moves toprevious file•If play time is more than 3 seconds, play thecurrent file from the beginningIf button is pressed (more than 0.8 seconds) it rewinds the track Play/Pause Plays/pauses the current file Next File •If button is pressed (less than 0.8 seconds):Moves to the next file•If button is pressed (more than 0.8 seconds)it will fast-forward the file RepeatRepeats the current file• If select the song in the file tab on the listscreen: Select the Repeat button to switch between repeating one song   and turn-ing repeat off.• If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeating one song   and turning repeat off K_UMa_UVO3[USA_EU]AV_PART2.indd   2-40K_UMa_UVO3[USA_EU]AV_PART2.indd   2-40 2016-01-27   오후 4:24:082016-01-27   오후 4:24:0
My Music I 2-4102Features Description ShufflePlays files in random order• If select the song in the file tab on the listscreen: Select the Shuffle button to switch between shuffle   and turning shuffle off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Shuffle button to switch between shuffle  and turning shuffle off Features Description Scan Scans the beginning parts of files (approx. 10 seconds per file)• If select the song in the file tab on the listscreen: Select the Scan button to switch between scan   and turning scan off • If select the song in the other tabs (Playlist,Artist, Song, Album) on the list screen: Select the Scan button to switch between scan  and turning scan off  Menu • Add to Playlist: Adds the current song to thePlaylist: Playlist is placed on the left tab in the list• Delete Current File: Deletes the current trackfrom My Music.• Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of the sound.  SoundHoundRuns the SoundHound feature.For more details regarding this feature, refer to the SoundHound information in the Info section. SEEK/TRACKIf button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning • If play time is less than 3 seconds, moves toprevious/next file•If play time is more than 3 seconds, plays thecurrent file from the beginning If button is pressed (more than 0.8 seconds) it will rewind/fast-forward the track TUNETurn the  TUNE knob to search a desired track. If the desired track is displayed, press the  TUNE knob to play the track. If the  TUNE knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-41K_UMa_UVO3[USA_EU]AV_PART2.indd   2-41 2016-01-27   오후 4:24:082016-01-27   오후 4:24:0
2-42 I Radio/MediaFeatures Description  Folder/ Category Name  Displays folder/category name in the list Current Song Displays the current playing file name Back Button Converts to basic mode screen  Upper Folder Moves to Root FolderFeatures Description Menu• Add to Playlist: Adds the current track to thePlaylist: Playlist is placed on the left tab in thelist (Maximum 100 files) Select a track andpress “Add to Playlist” to add the track in theplaylist• Delete from Playlist: Select a track from theplaylist and press “Delete from Playlist” todelete the track in the playlist•Delete Files: Deletes files from My Music If delete file from My Music, the informationrelated to song also deleted in the list.•Now Playing: When moving to a different listscreen, moves to the list page where the cur-rent file is located (Becomes disabled whenthe current list includes the current file Search MenuSearch tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album.  If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACKIf button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning •If play time is less than 3 seconds, moves toprevious/next file•If play time is more than 3 seconds, plays thecurrent file from the beginningIf button is pressed (more than 0.8 seconds) it will rewind/fast-forward the track TUNETurn the  TUNE knob to move the focus to pre-vious/next file. If the file you want to play is dis-played, press  TUNE knob to play the track. If the  TUNE knob is not pressed within 5 seconds of searching tracks, Tune search will be terminated.K_UMa_UVO3[USA_EU]AV_PART2.indd   2-42K_UMa_UVO3[USA_EU]AV_PART2.indd   2-42 2016-01-27   오후 4:24:092016-01-27   오후 4:24:0
Before Using the Bluetooth® HandsfreeBluetooth ConnectionBluetooth Phonepart.3 BluetoothK_UMa_UVO3[USA_EU]AV_PART3.indd   3-1K_UMa_UVO3[USA_EU]AV_PART3.indd   3-1 2016-01-27   오후 4:24:322016-01-27   오후 4:24:3
3-2 I BluetoothBefore Using the Bluetooth® HandsfreeWhat is Bluetooth® Wireless Technology?•  Bluetooth® Wireless Technology refersto a short-distance wireless network-ing technology which uses a 2.45GHzfrequency to connect various deviceswithin a certain distance.• Supported within PCs, external devices,Bluetooth® phones, PDAs, various elec-tronic devices, and automotive environ-ments, Bluetooth® Wireless Technologyto be transmitted at high speeds withouthaving to use a connector cable.• Bluetooth® Handsfree refers to a devicewhich allows the user to convenientlymake phone calls with Bluetooth®mobile phones through the Multimediasystem.• The Bluetooth® Handsfree feature maynot be supported in some mobile phones. For more information on mobile phonecompatibility, visit the KIA Motor website- KIA Motors Corporation: http://www.kia.com WARNING- Distracted Driving•  Focus on the road while driving. The driver'sprimary responsibility is in the safe and legaloperation of the vehicle. Drivers should notuse any hand held devices or other equipment or vehicle systems that distract the driverduring vehicle operation.•  Do not stare at the multimedia screen for long periods of time while driving. Staring at thescreen for prolonged periods of time can leadto traffi c accidents and can result in personalinjuries.Precautions for Safe Driving• Bluetooth® is a feature that enables driv-ers to make handsfree calls. Connectingthe head unit with a Bluetooth® phoneallows the user to conveniently makecalls, receive calls, and manage thephonebook. Before using Bluetooth® Wireless Technology, carefully read thecontents of this user’s manual.•Excessive use or operations while driv-ing may lead to negligent driving prac-tices and be the cause of accidents. Donot operate the device excessively whiledriving.••Viewing the screen for prolonged peri-Viewing the screen for prolonged peri-ods of time is dangerous and may leadods of time is dangerous and may leadto  accidents. When  driving, view  theto accidents. When driving, view thescreen only for short periods of time.screen only for short periods of time.BluetoothK_UMa_UVO3[USA_EU]AV_PART3.indd   3-2K_UMa_UVO3[USA_EU]AV_PART3.indd   3-2 2016-01-27   오후 4:24:332016-01-27   오후 4:24:3
Before Using the Bluetooth® Handsfree I 3-303CAUTIONS upon Connecting Bluetooth® Phone• Before connecting the head unit withthe mobile phone, check to see that themobile phone supports Bluetooth® fea-tures• Even if the phone supports Bluetooth® Wireless Technology, the phone willnot be found during device searches ifthe phone has been set to hidden stateor the Bluetooth® power is turned off.Disable the hidden state or turn on theBluetooth® power prior to searching/connecting with the head unit.• If Auto Connection is used, theBluetooth® phone is automatically con-nected when the ignition is turned on,making it unnecessary to have to con-nect the phone with the head unit everytime.•If you do not want automatic connectionwith your Bluetooth® device, turn theBluetooth® feature off of the Bluetooth®device.• Park the vehicle when connecting thehead unit with the mobile phone.•Bluetooth® connection may becomeintermittently disconnected in somemobile phones. Follow these steps to tryagain.1. Turn the Bluetooth® function within themobile phone OFF/ON and try again.2. Turn the mobile phone power OFF/ONand try again.3. Completely remove the mobile phonebattery, reboot, and then again.4. Reboot the Multimedia System andtry again.5. Delete all paired devices from both ofPhone and Head Unit sides and thentry again• The Handsfree call volume and qualitymay differ depending on the mobilephone.•Pairing Bluetooth® devices and use ofother Bluetooth® features are not sup-ported when the vehicle is in motion. Forsafety, please first park your vehicle. •If you continue having issue download-ing your contacts to your vehicle, con-tact your mobile phone provider. K_UMa_UVO3[USA_EU]AV_PART3.indd   3-3K_UMa_UVO3[USA_EU]AV_PART3.indd   3-3 2016-01-27   오후 4:24:332016-01-27   오후 4:24:3
3-4 I BluetoothBluetooth ConnectionPairing a New DeviceBefore you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car.Up to 5 Bluetooth devices can be paired.Only one Bluetooth device can be con-nected at a time.Pairing a New Device by Selecting Phone/CallPress the PHONE key or   key in the steering wheel control. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.Pairing a New Device Through thePhone SettingsPress the SETUP key. ▶ Select Phone. ▶ Select Bluetooth Connection.  ▶ Select Add New. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authoriza-tion popup. ▶ Connect Bluetooth.The default passkey is 0000.The vehicle name above is an example. Check the actual information on the product.Connecting Bluetooth DevicesConnects the Bluetooth devices that you add.Connecting Devices by Selecting Phone/CallPress the PHONE key or   key in the steering wheel control. ▶ Select the name of the device to connect. ▶ Connect Bluetooth.K_UMa_UVO3[USA_EU]AV_PART3.indd   3-4K_UMa_UVO3[USA_EU]AV_PART3.indd   3-4 2016-01-27   오후 4:24:332016-01-27   오후 4:24:3
Bluetooth Connection I 3-503Connecting Devices Through the Phone SettingsPress the SETUP key. ▶ Select Phone.  ▶ Select Bluetooth Connection.  ▶ Select the name of the device to connect. ▶ Connect Bluetooth.Disconnecting Bluetooth DevicesDisconnects Bluetooth devices that are connected.Press the SETUP key. ▶ Select Phone. ▶ Select Bluetooth Connection.  ▶ Select the name of the device to disconnect.Deleting Bluetooth DevicesDeletes the Bluetooth devices that you added. Note that deleting a Bluetooth device will delete all Call History and Contact Info downloaded along with it.Press the SETUP key. ▶ Select Phone.  ▶ Select Bluetooth Connection.  ▶ Select Delete Devices.  ▶ Select the device name to delete. ▶ Select Delete.K_UMa_UVO3[USA_EU]AV_PART3.indd   3-5K_UMa_UVO3[USA_EU]AV_PART3.indd   3-5 2016-01-27   오후 4:24:342016-01-27   오후 4:24:3
3-6 I BluetoothBluetooth PhonePhone Status Icons Shows the current phone status in the right top of the display.Icons DescriptionYou can use Bluetooth phones when a Bluetooth Hands-free connection is established.You can use Bluetooth audio features when a Bluetooth audio connection is estab-lished.You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established.Call signal strength indicatorBattery level of the Bluetooth devices connectedDownloading Call History listDownloading ContactsIn a Bluetooth phone callMicrophone mutedi Information•  The battery level icon and the call signal strength indicator may not be supported in some Bluetooth devices. •  The battery level may differ from the actual level remainingK_UMa_UVO3[USA_EU]AV_PART3.indd   3-6K_UMa_UVO3[USA_EU]AV_PART3.indd   3-6 2016-01-27   오후 4:24:352016-01-27   오후 4:24:3
Bluetooth Phone I 3-703DialDials a call after the Bluetooth devices are connected.• Press the PHONE key or  key in the steering wheel control. •You can also select All Menus icon ▶ andthen Phone  icon.Name Description  KeypadUse the keypad to enter the phone number that you want to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone   Delete Deletes the numbers that you entered. Settings Moves to a screen of Phone Settings. CallMakes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to automatically dial that number again.i Information•  Some types of mobile phones may notsupport the Speed Dial function.Accept/Reject CallIf there is an incoming call after you made a Bluetooth connection, a popup message will appear.Name Description Accept Answers the call. Reject  Ignores the call.i Information•  In some mobile phones, the caller's numbermay not be displayed, and the Reject featuremay not be supported.K_UMa_UVO3[USA_EU]AV_PART3.indd   3-7K_UMa_UVO3[USA_EU]AV_PART3.indd   3-7 2016-01-27   오후 4:24:352016-01-27   오후 4:24:3
3-8 I BluetoothUsing the Menu During a Phone CallWhen making a call, you can use the fol-lowing menu items.Name Description Use PrivateSwitches a voice call from the car Hands-free to the mobile phone. End Ends a call. Contacts  Displays the Contacts list.  Outgoing  VolumeDisplays the Mic Volume settings. You can adjust the in-call volume that the other party hears (level 1 - 5). Keypad Moves to a screen for entering ARS numbers. SwitchSwitches to a call on hold, if any. You can also switch calls by select-ing the number in the Information Display. The Switch function switches the current call to a wait-ing call in order to answer a new incoming call.i Information•  If the caller's number is listed in Contacts, thecaller's name will be displayed. Otherwise,only the number will be displayed. In somemobile phones, the phone number may notbe displayed.•  In some Bluetooth devices, the Use Privatefeature may not be supported. •  In some Bluetooth devices, the Switch feature may not be supported.•  During a phone call on a Bluetooth Hands-free, you cannot access other modes, such as Radio and Settings. •  Depending on handset types, the in-callvolume the other party hears may differ. If theother party hears your voice too low or tooloud, adjust the mic volume.K_UMa_UVO3[USA_EU]AV_PART3.indd   3-8K_UMa_UVO3[USA_EU]AV_PART3.indd   3-8 2016-01-27   오후 4:24:362016-01-27   오후 4:24:3
Bluetooth Phone I 3-903Call HistoryPress the PHONE key, and then Call History.Name Description  All Lists the all call history.  Dialed Lists the calls that you made. Received  Lists the calls that you have received. Missed  Lists the calls you missed. Call HistoryDisplays all of your call history. Select from the list to dial the number. InformationDisplays the details of your call history information. DownloadDownloads the call his-tory information from your mobile phone. CallDials the selected number in your Call History Information. Contacts InfoGoes to the Contact Information screen if the number has been stored.i Information•  In some mobile phones, call records may not be added to your Call History.•  Calls from restricted ID's are not added to your Call History Information.•  Up to 50 calls can be added in each Dialed Calls/Received Calls/Missed Calls list.•  The durations of each dialed/received call are not displayed in your car's Call History list.•  While the call history download is in progress, the status bar displays an icon ( ).•  If the call history download is turned off on the Bluetooth device, the call history download will fail.•  Some devices require a device authentication for downloading your call history. If download fails, check if the Bluetooth settings or display status are normal.•  Some devices do not support call history download. Check if your Bluetooth device supports download feature. For details regarding Bluetooth-supported devices and their functional compatibility, visit http://www. kia.comK_UMa_UVO3[USA_EU]AV_PART3.indd   3-9K_UMa_UVO3[USA_EU]AV_PART3.indd   3-9 2016-01-27   오후 4:24:372016-01-27   오후 4:24:3
3-10 I BluetoothContactsPress the PHONE key, and then Contacts.Name Description Contacts ListThe list of Contacts. Select from the list to dial the number. Information  Displays contact infor-mation. Download Downloads contacts from your mobile phone.  Search by  NameSearches Contacts for the name that you enter.  Search by NumberSearches Contacts for the number that you enter.  Add to FavoritesAdds a phone number to Favorites.i Information•Up to 5000 phone numbers can bedownloaded from a single, paired Bluetoothdevice.•You cannot edit or delete downloadedphone numbers from your car.•Contacts can be viewed only when theBluetooth device is connected.•  Even if the Bluetooth device is disconnected,the downloaded data will remain. (Note thatdeleting a paired phone will also delete alldownloaded Contacts and Call History data)•Downloaded phone numbers may be lostdepending on the condition of the headunit. Keep your important data in a safeplace.•Contacts from both the SIM card and yourmobile phone are downloaded at the sametime by default.•The status bar displays a ( ) whiledownloading contacts.•The download will not be available if thecontacts download function is turned off onyour Bluetooth device.K_UMa_UVO3[USA_EU]AV_PART3.indd   3-10K_UMa_UVO3[USA_EU]AV_PART3.indd   3-10 2016-01-27   오후 4:24:382016-01-27   오후 4:24:3
Bluetooth Phone I 3-1103•  Some devices require a device authenticationfor downloading your contacts. If downloadfails,check your phone screen and confi rm the download if necessary.•  Some devices do not support contactsdownload feature. Check if your Bluetoothdevice supports contacts download. ForBluetooth supporting devices details andcompatibility, visit http://www.kia.comFavoritesPress the PHONE key, and then Favorites.Name Description FavoritesLists the phone num-bers saved as Favorites. Select from the list to dial the number. Add New Adds a new number to Favorites. Delete ItemsDeletes numbers that you select from Favorites. Delete All Deletes all of the numbers from Favorites.K_UMa_UVO3[USA_EU]AV_PART3.indd   3-11K_UMa_UVO3[USA_EU]AV_PART3.indd   3-11 2016-01-27   오후 4:24:392016-01-27   오후 4:24:3
MEMOK_UMa_UVO3[USA_EU]AV_PART3.indd   3-12K_UMa_UVO3[USA_EU]AV_PART3.indd   3-12 2016-01-27   오후 4:24:402016-01-27   오후 4:24:4
The 911 Connect feature may not operate in the following situationsAbout UVO eServicesBefore using UVO eServices Connecting BluetoothPair a device from Bluetooth-enabled phoneConnecting to smartphone via USB911 ConnectRoadside AssistVehicle DiagnosticsMy Car ZoneParking MindereServices Guidepart.4 UVO eServicesK_UMa_UVO3[USA_EU]AV_PART4.indd   4-1K_UMa_UVO3[USA_EU]AV_PART4.indd   4-1 2016-01-27   오후 4:25:002016-01-27   오후 4:25:0
4-2 I UVO eServicesUVO eServicesThe 911 Connect feature maynot operate in the following situations When the vehicle ignition is not turned on. When the phone Bluetooth® feature is set to off. When the phone Bluetooth® cannot be connected or becomes disconnected. When there are no phones paired with the vehicle. When cellular service is unavailable. When the power turns off due to phone power (battery) issues. When a Bluetooth® device without phone feature support has been connected, such as an MP3 device. When the system is booting. When the system power supply is unstable. When the attempted call is blocked due to user operations. When the 9-1-1 call is unstable due to phone or other commu-nication network issues. When the call feature is not operating due to phone settings set by the user. When the phone cannot be controlled via Bluetooth® due to phone specifications or characteristics.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-2K_UMa_UVO3[USA_EU]AV_PART4.indd   4-2 2016-01-27   오후 4:25:012016-01-27   오후 4:25:0
Using UVO eServices and Precautions I 4-304 Using UVO eServices and Precautions Download the UVO eServices App and install it on your smartphone. The app can be downloaded from your smartphone’s app store. For using UVO eServices call features such as 911 Connect, Roadside Assist and eServices Guide, a smartphone must be connected with the vehicle via Bluetooth. Pair and connect your smartphone with the vehicle. For information on connecting your Bluetooth device, refer to the smartphone user’s manual and instructions on the Phone Help screen on your radio. Up to five Bluetooth devices can be paired to the vehicle and only one device can be connected at a time. For using data communication of Vehicle Diagnostics, Parking Minder, and My Car Zone, smartphone must be connected with the vehicle via USB cable.  ※  The use of genuine cable is recommended. (The use of other products may result in abnormal or non-proper operation.) Login and activate the UVO eServices App on your smartphone. Some UVO eServices features will only be available when your smartphone is connected with the vehicle via USB and the UVO eServices App is running. UVO eServices may not operate properly with incompatible smartphones. To view the list of compatible smartphones, please visit MyUVO.com Communication between the vehicle and smartphone app may temporarily disconnect depending on the phone state. If the feature is not operating properly, you may need to reset the UVO eServices App or the smartphone and try again according to the following steps.1. Try feature again in the Head Unit2. Restart smartphone app3. Re-connect Bluetooth and USB cable4. Reset smartphone        5. Delete Device and pair again Some services use the customer’s mobile phone data plan for data communication. Therefore, the features will function in accordance with the cellular plan. Use of the most up-to-date app version is recommended. For smartphone related inquiries, please visit MyUVO.com.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-3K_UMa_UVO3[USA_EU]AV_PART4.indd   4-3 2016-01-27   오후 4:25:022016-01-27   오후 4:25:0
4-4 I UVO eServicesAbout UVO eServicesUVO eServices provides the following features through Bluetooth and/or USB connection to your smartphone.Name Connection Description  911 Connect BTIf an airbag deploys, your vehicle automatically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator.  Roadside Assist BT & USB If a diagnostic issue exists, you can connect with a Roadside Assist.  Vehicle Diagnostics USBInforms you if there is a diagnostic issue found in your vehicle. If an issue is found, you can contact a call center through Roadside Assist or reserve an appointment with your preferred Kia dealer through Schedule Service.  My Car  Zone USBKeeps track of predefined triggered alerts such as Speed Alert and Curfew Limit Alert from the My Car Zone feature.  Parking  Minder USBSaves the location of your parked vehicle on your UVO eServices smartphone app.You can check where your vehicle is parked through the UVO eServices App on your smartphone.  eServices Guide BT Receive guidance on how to use UVO eServices.i Information•  24-hour Roadside Assistance is a service plan provided by Kia MotorsAmerica, Inc. Certain limitations apply. Coverage details are availablein the Kia Warranty and Consumer Information Manual. For accessto Enhanced Roadside Assistance, a connected mobile phone viaBluetooth within the cellular service coverage area is required.To use UVO eServices, the following conditions must be met.1. The UVO eServices smartphone app must be installed andyou must log in using your MyUVO account credentials.2. The smartphone must be connected via Bluetooth and USBcable to the vehicle.3. Once this is complete, eServices must be activated.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-4K_UMa_UVO3[USA_EU]AV_PART4.indd   4-4 2016-01-27   오후 4:25:022016-01-27   오후 4:25:0
Pair a device from Bluetooth-enabled phone I 4-504Before using UVO eServicesInstalling the UVO eServices App on your smartphone1. Download and install the UVO eSer-vices App on your smartphone.The app can be downloaded from theApple App Store or Google Play.2. Register your vehicle and account atMyUVO.comNote: MyUVO.com is accessible fromyour phone’s browser.3. Start the UVO eServices App on yoursmartphone and log in.Connecting BluetoothPress the   key on the steering wheel or press the PHONE key on the head unit.Press SETUP ▶ Phone ▶ Bluetooth Connection.Pair a device fromBluetooth-enabled phone1. Turn on the Bluetooth feature on yoursmartphone’s Bluetooth settings screen.2.  Search Bluetooth devices on yoursmartphone.3.  Select the Vehicle Name on the phonethat matches the name shown on thescreen.4.  Verify the passkey shown on the touch-screen.If the phone supports SSP, check the passkey on your Bluetooth® device and confirm the authentication.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-5K_UMa_UVO3[USA_EU]AV_PART4.indd   4-5 2016-01-27   오후 4:25:022016-01-27   오후 4:25:0
4-6 I UVO eServicesConnecting to smartphone via USB1. Connect your smartphone with the vehi-cle via USB cable. NOTICE•  For smartphone related inquiries, please visitMyUVO.com. Activating UVO eServicesPress the UVO key, then press the Vehicle Diagnostics or My Car Zone or Parking Minder button.Press the Yes button, then the UVO eServices activation process will begin. NOTICE•Before activating UVO eServices, ensureyour phone is connected to the vehicle viaUSB cable.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-6K_UMa_UVO3[USA_EU]AV_PART4.indd   4-6 2016-01-27   오후 4:25:042016-01-27   오후 4:25:0
911 Connect I 4-704911 Connect911 ConnectIf an airbag deploys, your vehicle automat-ically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator.The 911 Connect feature is available only when the mobile phone is connected via Bluetooth.By default, this feature is turned off. To turn it on, you must turn it on in the eServices Settings menu. By enabling this feature, you are agreeing to the 911 Connect terms of use.A ( ) icon is displayed at the top of the touch screen as shown below when phone is connected to UVO eServices system via Bluetooth and the 911 connect feature is turned on.Initiating a 911 CallIf an airbag deploys, the following screen is displayed and a call is automatically placed to 9-1-1 after 10 seconds.Once a call is connected with a 9-1-1 operator, it is possible to request emer-gency services to be dispatched to your location.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-7K_UMa_UVO3[USA_EU]AV_PART4.indd   4-7 2016-01-27   오후 4:25:062016-01-27   오후 4:25:0
4-8 I UVO eServicesThe 9-1-1 operator may request informa-tion on the current location of your vehicle.When the 9-1-1 operator requests your vehicle location, “Sending Location” is displayed on the screen and the vehicle location is automatically sent to the 9-1-1 operator.When the 9-1-1 operator attempts to talk to the driver again, the call time is dis-played and allows the driver to speak with the 9-1-1 operator.Roadside AssistRoadside AssistIf there is any issues in the vehicle, you can connect with a Roadside Assist agent. The Roadside Assist feature can be used only when your phone is connected via Bluetooth.Press the UVO key ▶ Roadside Assist K_UMa_UVO3[USA_EU]AV_PART4.indd   4-8K_UMa_UVO3[USA_EU]AV_PART4.indd   4-8 2016-01-27   오후 4:25:062016-01-27   오후 4:25:0
Vehicle Diagnostics I 4-904Vehicle DiagnosticsConducting Vehicle DiagnosticsVehicle Diagnostics is available only when the ignition is turned on and the vehicle is parked.It also requires that UVO eServices is activated, and the Phone is connected via USB cable before starting Vehicle Diagnostics.Press the UVO key ▶ Vehicle DiagnosticsThe Vehicle Diagnostics process will begin.When a diagnostics check is in progress, keep the vehicle in park with the ignition on. To cancel diagnostics, press the Cancel button on the touch screen or any hardkey.If diagnostic issues are found, press the Send Report button to send to your MyUVO account or press the Schedule Service but-ton to schedule an appointment with your preferred or nearby Kia dealer.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-9K_UMa_UVO3[USA_EU]AV_PART4.indd   4-9 2016-01-27   오후 4:25:072016-01-27   오후 4:25:0
4-10 I UVO eServicesSchedule ServiceWhen scheduling an appointment using the Schedule Service button, pressing the Preferred button will allow you to request an appointment with your preferred Kia dealer and send your vehicle’s diagnostics infor-mation.Pressing the Nearest button will allow you to request an appointment with the near-est Kia dealer and send your vehicle’s diagnostics information.Press the Preferred or Nearest button.Request an appointment with Preferred or Nearest Kia Dealer and send your vehi-cle’s diagnostics data.Send ReportPress the Send Report in the vehicle diag-nostics result screen. Vehicle Diagnostics Data is transmitted to your account and you can see the report on MyUVO.comK_UMa_UVO3[USA_EU]AV_PART4.indd   4-10K_UMa_UVO3[USA_EU]AV_PART4.indd   4-10 2016-01-27   오후 4:25:082016-01-27   오후 4:25:0
Vehicle Diagnostics I 4-1104Even if diagnostic issues are not found after Vehicle Diagnostics, it is recom-mended that you send the diagnostic results to your MyUVO account.Press the Send Report button to send the diagnostics results to your MyUVO account.Scheduled DiagnosticsIf you have set up Scheduled Diagnostics on your UVO eServices App, a vehicle diagnostics check will automatically start on the day you selected.On the date of the Scheduled Diagnostics, the following window will be displayed.Press the Yes button on the touch screen to proceed with diagnostics.Press the Send Report button to see the Vehicle Health Report on MyUVO.com.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-11K_UMa_UVO3[USA_EU]AV_PART4.indd   4-11 2016-01-27   오후 4:25:092016-01-27   오후 4:25:0
4-12 I UVO eServicesAutomatic DiagnosticsIf a critical diagnostics issue with your vehicle’s powertrain is detected, Automatic Diagnostics will be notified. NOTICE•  The screen messages differ based on thevehicle diagnostics severity. Ensure yourphone is connected to the system via USBcable before using Schedule Service andSend Report.My Car ZoneMy Car Zone is a feature that provides alerts and driving history for Curfew Limit Alerts and Speed Alerts set by the user.Name DescriptionCurfew Limit AlertCurfew Limit Alerts are alerts that are triggered when a driver is driving within a predefined time range.Speed AlertSpeed Alerts are alerts that are triggered when a driver exceeds the predefined maximum speed.My Car Zone features are supported only when UVO eServices has been activated.Press the UVO key ▶ My Car ZoneCurfew Limit Alerts HistorySpeed Alerts HistoryK_UMa_UVO3[USA_EU]AV_PART4.indd   4-12K_UMa_UVO3[USA_EU]AV_PART4.indd   4-12 2016-01-27   오후 4:25:102016-01-27   오후 4:25:1
My Car Zone I 4-1304Curfew Limit AlertSpeed AlertCurfew Limit AlertYou can check the Curfew Limit Alert his-tory for a list of past triggered curfew alerts.Name Description PhoneName of phone con-nected upon triggered curfew limit Alert Time Initial alert time DurationTotal duration of driving while curfew limit was triggered Driving TimeTotal driving time from turning ignition on until turning ignition offSpeed AlertYou can check the Speed Alert history for triggered speed limit alerts of the vehicle.Name Description PhoneName of phone con-nected upon triggered speed limit alert Max. SpeedMaximum vehicle speed upon triggered speed limit alert Alert TimeTime from first triggered alert until last triggered alert  DurationTotal triggered alert time from turning ignition on to turning ignition offK_UMa_UVO3[USA_EU]AV_PART4.indd   4-13K_UMa_UVO3[USA_EU]AV_PART4.indd   4-13 2016-01-27   오후 4:25:122016-01-27   오후 4:25:1
4-14 I UVO eServicesTo check My Car Zone alert history from your smartphone, you must first send the alert history to your MyUVO account.Parking MinderSending Parking LocationThe location where your vehicle is currently parked can be sent to your smartphone.Ensure that your smartphone is connected via USB and the UVO eServices App is running before using this feature.After parking the vehicle, press the UVO key ▶ Parking Minder to send the vehicle’s location to your smartphone.Once the parking location has been sent, you can view your vehicle’s location from the UVO eServices App on your smart-phone. NOTICE•  When the parking location is being sent, donot drive the vehicle. Ensure that you havelogged into the UVO eServices App, and yourphone is connected to the multimedia systemvia USB cable.•  When ignition is turned off while the phone isconnected via USB, Parking Minder can betransferred automatically if the option is set upin UVO eService SettingsK_UMa_UVO3[USA_EU]AV_PART4.indd   4-14K_UMa_UVO3[USA_EU]AV_PART4.indd   4-14 2016-01-27   오후 4:25:132016-01-27   오후 4:25:1
eServices Guide I 4-1504eServices GuideeServices GuideeServices Guide provides guidance on how to use UVO eServices.This feature is only available when the mobile phone is connected via Bluetooth.Press the UVO key ▶ eServices Guide UVO eServices SettingsRefer to SETUP ▶ UVO eServices.K_UMa_UVO3[USA_EU]AV_PART4.indd   4-15K_UMa_UVO3[USA_EU]AV_PART4.indd   4-15 2016-01-27   오후 4:25:142016-01-27   오후 4:25:1
MEMOK_UMa_UVO3[USA_EU]AV_PART4.indd   4-16K_UMa_UVO3[USA_EU]AV_PART4.indd   4-16 2016-01-27   오후 4:25:142016-01-27   오후 4:25:1
What is Voice Recognition?Precautions Required for Successful Voice RecognitionStarting/Ending and Setting Voice RecognitionVoice Recognition Screen OverviewVoice CommandsSiri Eyes Free part.5 Voice RecognitionK_UMa_UVO3[USA_EU]AV_PART5.indd   5-1K_UMa_UVO3[USA_EU]AV_PART5.indd   5-1 2016-01-27   오후 4:25:262016-01-27   오후 4:25:2
5-2 I Voice RecognitionWhat is Voice Recognition?The voice recognition feature operates the multimedia system by recognizing voice commands and enables hands-free oper-ation of the system while you are driving your car.Not all possible voice commands are rec-ognized by the system due to technological limitations. To make up for these limitations, the system displays the voice commands that are available for you to use.There are errors in communication between people. Likewise, voice recognition some-times misunderstands your voice command in some circumstances. If this happens, either check the screen for the available options and say the command again, or manually select and press the button for the corresponding command on the screen.Precautions Required for Successful Voice Recognition1.  Voice recognition supports only thecommands that are displayed on thescreen and written in the User's Guide.2.  To ensure the correct recognition andexecution of your command, say yourcommand when you hear the beep aftera voice prompt.3.  Voice recognition automatically ends if:1)  A call is incoming or outgoing2)  A media device (USB or iPod, etc.) isconnected or disconnected3)  The rear view camera is operated4)  The car engine starts or stops5)  A system key, such as RADIO keyor MEDIA key is selected4.  The microphone used for the voicerecognition system is located in theheadliner directly above the driver'shead. To make your commands betterunderstood, keep your body straightin the driver's seat when speaking thecommand.5.  Speaking naturally and clearly willensure better recognition of your voicecommands.6.  In the following cases voice recognitionwill be affected by ambient noise.1)  The sound of the wind if any windowor the sun roof is open.2)  High speed blower from the air vents.Set climate control to blow lower thanlevel 3.3)  Vibrations from passing through atunnel.4)  Vibrations from driving on an unevenroad.5)  Storms and heavy rain.Voice RecognitionK_UMa_UVO3[USA_EU]AV_PART5.indd   5-2K_UMa_UVO3[USA_EU]AV_PART5.indd   5-2 2016-01-27   오후 4:25:272016-01-27   오후 4:25:2
Starting/Ending and Setting Voice Recognition I 5-305Starting/Ending and Setting Voice RecognitionStarting Voice RecognitionPress the   key briefly (less than 0.8 seconds) on the steering wheel control to activate voice recognition.Ending Voice Recognition1. Select “Exit” to the left of the bottom toend voice recognition.2. Press and hold (more than 0.8 sec-onds) the   key on the steeringwheel control to end voice recognition.Combining Voice Recognition with On-Screen CommandsAfter pressing the   key, say a com-mand after the beep. The voice recognition system will execute the desired operation after understanding the command.Alternatively, you may touch any of the cor-responding Frequently Used Commands on the screen while the Voice Recognition system is in operation.Combining voice recognition with available on-screen commands is useful when the system is taking longer than expected or the voice command did not execute as desired.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-3K_UMa_UVO3[USA_EU]AV_PART5.indd   5-3 2016-01-27   오후 4:25:272016-01-27   오후 4:25:2
5-4 I Voice RecognitionExtending the Listening TimeWhen the system is waiting for your com-mand, after the voice prompt and beep have been heard, if you press the key (shorter than 0.8 seconds), then the beep will sound again and standby mode will restart.When activated, voice recognition waits for your command for 5 seconds. If you say nothing for 5 seconds, a voice prompt will ask for your command again.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-4K_UMa_UVO3[USA_EU]AV_PART5.indd   5-4 2016-01-27   오후 4:25:442016-01-27   오후 4:25:4
Starting/Ending and Setting Voice Recognition I 5-505Skipping Prompt Messages When you hear the prompt message, press the   key on the steering wheel control to skip the message and go directly to listening mode to say your com-mand.This results in faster operation when you feel the message is too long or you already know the command to use.i Information•  Refer to Part 8 for instructions on how tochange the Voice Recognition Settings.Adjusting Voice Recognition VolumeDuring voice recognition, rotate the vol-ume knob to adjust the message volume.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-5K_UMa_UVO3[USA_EU]AV_PART5.indd   5-5 2016-01-27   오후 4:26:092016-01-27   오후 4:26:0
5-6 I Voice RecognitionVoice Recognition Screen OverviewStart ScreenName Description  Most  frequently  used  commandsDisplays the six most fre-quently used commands. Not      available      commandDisplays commands that are not available due to a failure in meeting the conditions for using them and thus need additional settings. The conditions required for using them will be described briefly under each command.Name Description  Voice  recognition  status icons Standby Voice guidance   Voice command  processRecognized resultsDisplays the voice rec-ognition result. User's speaking volume being recognizedDisplays the voice command volume in real time. HelpDisplays all available help commands in a tree format. Exit Ends the voice recog-nition.Help DisplayName Description Command list•  Shows the availablecommands. •  Select or say a command to display additional com-mands in detail. How to use for selected itemThis section shows how to use voice recognition for the selected item.How to use in generalThis section displays how to use voice recognition in general.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-6K_UMa_UVO3[USA_EU]AV_PART5.indd   5-6 2016-01-27   오후 4:26:112016-01-27   오후 4:26:1
Voice Recognition Screen Overview I 5-705Instructions for Using Voice RecognitionName Description Detail      instructionThis section describes how to use voice recog-nition in detail.Close button Closes the screen and restarts voice recognition.i Information•  In the instructions screen, no voice isrecognized, so you must manually issuecommands. Because the instructions screendisplays a lot of content, you can not view itwhile driving for safety precautions.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-7K_UMa_UVO3[USA_EU]AV_PART5.indd   5-7 2016-01-27   오후 4:26:122016-01-27   오후 4:26:1
5-8 I Voice RecognitionVoice CommandsTypes of CommandsVoice recognition commands are classified as “Global Commands” and “Local Commands”.1. Global Commands (●): Commands that can be used immedi-ately after activating voice recognition.2. Local Commands (○): Commands that can be used when a multimedia or Bluetooth function is running, or displayed on the screen, after activating voice recognition.Call Commands* Check the following before using call commands:1.  Voice commands related to phone calls can be used after con-necting a Bluetooth device. 2.  To call a person, for example “Call <John Smith>” whose name is listed in Contacts, you must first download the Contacts list. For details on downloading contacts, see “Part 3. Using Bluetooth > Chapter 3. Bluetooth Phone > 3.10 Contacts”.3.  After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you cannot make a call by name yet. The time it takes to convert voice data may vary depending on the number of Contacts downloaded on the phone.Command Operation●Call Displays downloaded Contacts, after this you can make a call by saying the name.●Call <Name> You can directly call a person by <Name> in the downloaded Contacts.●Call <Name> on MobileYou can call a person <name> directly to the number that is saved as “Mobile” in the downloaded Contacts.e.g.) Call “John Smith” on Mobile●Call <Name> in OfficeYou can call a person <name> directly to the number that is saved as “Office” in the downloaded Contacts.e.g.) Call “John Smith” in Office●Call <Name> at HomeYou can call a person <name> directly to the number that is saved as “Home” in the downloaded Contacts.e.g.) Call “John Smith” at Home●Call <Name> on OtherYou can call a person <name> directly to the number that is saved as “Other” than “Mobile, Home, or Office” in the down-loaded Contacts.e.g.) Call “John Smith” on Other●Dial Number Displays a screen where you can say a phone number to dial.●Dial <Phone #> You can directly say the number to call.e.g.) Dial 111 555 1234●Redial Directly calls at the number that you last dialed.●Call History Displays your Call History, where you can say the list number to make a call.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-8K_UMa_UVO3[USA_EU]AV_PART5.indd   5-8 2016-01-27   오후 4:26:122016-01-27   오후 4:26:1
Voice Commands I 5-905Radio CommandsCommand Operation●Radio Plays the most recent radio channels from FM, AM, and SiriusXM™.●FM Plays FM radio.●FM <87.5~107.9>Tunes to FM <Frequency> according to what you say.e.g.) FM 87.5: FM eighty seven point five●SiriusXM Plays SiriusXM™ radio.●SiriusXM <0~999>Tunes to SiriusXM™ Channel <Channel Number> according to what you say.e.g.) SiriusXM 23: SiriusXM Twenty three●AM Plays AM radio.●AM <530~1710>Tunes to AM <Frequency> according to what you say.e.g.) AM 530: AM Five Thirty○Preset <1~40> Tunes to your preset stations (1 to 40).○Channel <0~999>In SiriusXM™ Radio mode, turns on the <Channel Number> that you say.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-9K_UMa_UVO3[USA_EU]AV_PART5.indd   5-9 2016-01-27   오후 4:26:122016-01-27   오후 4:26:1
5-10 I Voice RecognitionMedia Commands* Check the following before you use media commands.1. If no media is connected or if no playable files exist at the timewhen you use these commands, a voice message will tell youthat this is not available.2.  If you say the name of the media that is currently playing again,then that media will continue playing.e.g.) Saying “USB” while USB content is playing.Command Operation●Music Continues the last media you played.●CD CD Plays the content of the CD currently inserted.●iPodPlays the iPod currently connected. This will work the same when an iPhone is con-nected. If a USB is connected, then it will be played instead of the iPod.●USBPlays the music on the USB currently con-nected.If an iPod is connected, then the iPod will be played instead of the USB.●Bluetooth AudioPlays the music on the Bluetooth phone currently connected.This may not be supported depending on the Bluetooth connection status.●AUX Plays external devices that are currently connected.●My Music Plays My Music files stored in the system.●Pandora Radio Plays Pandora Radio that is currently con-nected.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-10K_UMa_UVO3[USA_EU]AV_PART5.indd   5-10 2016-01-27   오후 4:26:122016-01-27   오후 4:26:1
Voice Commands I 5-11051. Audio CD CommandCommand Operation○Play Plays a paused track.Maintains the current settings during playback.○PausePauses a track that is currently playing.Maintains current settings while paused during playback.○Tra ck<1~99> Plays a desired track number.○ShufflePlays tracks or files randomly.Maintains current settings during shuffled play-back.○Shuffle OffCancels Shuffle and plays tracks sequentially. Maintains current settings during sequential playback.○RepeatPlays the current track repeatedly.Maintains the current settings during repeat play-back.○Repeat OffCancels Repeat and plays multiple tracks or files.Maintains current settings during multiple track playback.2. MP3 CD/USB Music/iPod/My Music CommandCommand Operation○Play Plays a selected file.Maintains the current settings during playback.○PausePauses a file that is playing.Maintains current settings while paused during playback.○ShufflePlays tracks or files randomly.Maintains current settings during shuffled playback.○Shuffle OffCancels Shuffle and plays tracks sequentially.Maintains current settings during sequential playback.○RepeatPlays the current track or file repeatedly.Maintains the current settings during repeat playback.○Repeat OffCancels Repeat and plays multiple tracks or files.Maintains current settings during multiple track playback. K_UMa_UVO3[USA_EU]AV_PART5.indd   5-11K_UMa_UVO3[USA_EU]AV_PART5.indd   5-11 2016-01-27   오후 4:26:122016-01-27   오후 4:26:1
5-12 I Voice Recognition3. Pandora Radio CommandCommand Operation○Skip Moves to the next track.○Thumbs upIf you like the genre of the music currently playing, say “Thumbs up” so that more similar music will play.○Thumbs downIf you don’t like the music currently playing, say “Thumbs down” to minimize the num-ber of playbacks of similar genre music.○PlayPlays a selected file.Maintains the current settings during play-back.○PausePauses a file that is playing.Maintains current settings while paused during playback.○ShufflePlays tracks or files randomly.Maintains current settings during shuffled playback.4. Bluetooth audio/AUX CommandFor Bluetooth audio and external devices (AUX), local commands are unavailable, including Play, Pause, Repeat and Shuffle.UVO eServices Commands ListCommand Operation●Roadside Assist Connect with a Roadside Assist agent.●VehicleDiagnosticsInforms you if diagnostic issues are found in your vehicle●eService Guide Provides guidance on how to use UVO eServicesK_UMa_UVO3[USA_EU]AV_PART5.indd   5-12K_UMa_UVO3[USA_EU]AV_PART5.indd   5-12 2016-01-27   오후 4:26:122016-01-27   오후 4:26:1
Voice Commands I 5-1305Other Commands List(Commands used in List/Help)Command Operation●HelpMoves to the voice recognition help screen.All available commands can then be identi-fied and used.○Line 1~4 (One~Four)When you cannot select a certain name, such as in Call History, you can select it using numbers.Simple numbers can be recognized, such as “One” or “Two”.○Yes/NoWhen voice recognition is activated, this com-mand is used when an answer is requested for a confirmation question.○Previous/Next When four or more searched items are listed, you can move to the previous or next page using a voice command.○Manual InputWhen Dial entry results are displayed, this command is used to search manually, rather than to search with a voice command.Voice recognition stops after this command is used. ○Go Back Moves to the previous screen.●Exit    Ends the voice recognition.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-13K_UMa_UVO3[USA_EU]AV_PART5.indd   5-13 2016-01-27   오후 4:26:122016-01-27   오후 4:26:1
5-14 I Voice RecognitionSiri Eyes FreeHow to start SiriIf you want to use Siri, you have to con-nect your iOS device to the Multimedia system through Bluetooth. (Please check whether your iOS device supports Siri and turning Siri On)Then you can use Siri while pressing and holding   key on the steering wheel. How to use SiriWhen you access the Siri screen while pressing and holding   key on the steering wheel, you can press Speak but-ton and then you can speak what you want. Note that the Multimedia system only supports “Phone” related functions. Other functions will be performed in your iOS device. If you press voice key quickly, Siri would re-start. If you hold down voice key, Siri would be terminated and the screen would go back to the previous screen. Eyes-Free mode would be acti-vated automatically while you are driving. When shifting gears into P or putting the Parking brake on, Eyes-Free mode would be deactivated automatically. i Information•  Functions and feedbacks from voicecommands via Siri are executed in the iOSdevice. If the iOS version is changed, thefunctions and response may be differentaccording to the iOS device and the latestversion.K_UMa_UVO3[USA_EU]AV_PART5.indd   5-14K_UMa_UVO3[USA_EU]AV_PART5.indd   5-14 2016-01-27   오후 4:26:132016-01-27   오후 4:26:1
Start upPandora®SiriusXM™ DataSoundHoundAndroid Autopart.6 Apps/InfoK_UMa_UVO3[USA_EU]AV_PART6.indd   6-1K_UMa_UVO3[USA_EU]AV_PART6.indd   6-1 2016-01-27   오후 4:26:432016-01-27   오후 4:26:4
6-2 I Apps/InfoApps/InfoStart UpPress the APPS/ key on the head unit to move to the information screen. The screen is composed of: •Pandora®: To listen to Pandora® Radio by connecting a smartphone•Quick Guide: To provide information about how to controls andmajor functions•SiriusXM Data: To show weather, sports, stock, fuel prices andmovie information provided by SiriusXM™ Travel Link.•Voice Commands: To provide information about available voicecommand list to use voice recognition.• Android Auto: To conveniently use various functions of yourmobile phone while driving (For more information, visit theGoogle website http://support.google.com/androidauto).K_UMa_UVO3[USA_EU]AV_PART6.indd   6-2K_UMa_UVO3[USA_EU]AV_PART6.indd   6-2 2016-01-27   오후 4:26:442016-01-27   오후 4:26:4
Pandora® I 6-306Pandora®Press the “Pandora” icon after selecting All Menus or the APPS/ key to enter Pandora®.Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information.Pandora® Screen ControlsName Description  Mode Displays the current operating mode.  Station Name Shows the station name current playing. Artist Name Shows the artist/title information current playing.Name Description Song Title Shows the song title current playing. Album Name Shows the album name current playing.  Play Time Displays the current play time.  Thumbs DownIf you don’t like the music currently playing, press this button to move to the next song and to minimize the number of playbacks of similar genre music.  You can move to next song up to specific times  which Pandora® allows  Thumbs UpIf you like the genre of the music Thumbs Up, press this button to send a “Thumbs Up” signal to Pandora® so that more similar music will play.  This function can not be reset once setting is  chosen. Bookmark          TrackAdd the music current playing to the bookmarks list.   You can view your bookmarked songs from your Pandora® profile online. Go to pandora.com, then click on the “Your profile” button above the player. That will bring up a page with your stations, bookmarked songs.  This function can not be reset once setting is chosen.  Play/Pause Plays/pauses the current song SkipMoves to the next track You can move to next song up to specific times which Pandora® allows  Station Moves to the station list screen.   Shared Station IconIndicates that the station is already shared. Thumbs Up/Down in not available for shared      stations.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-3K_UMa_UVO3[USA_EU]AV_PART6.indd   6-3 2016-01-27   오후 4:26:442016-01-27   오후 4:26:4
6-4 I Apps/InfoName Description Menu• Sound SettingsMoves to the sound settings screen.• QuitExit current Pandora® mode and then move toprevious AV mode.  You can view your bookmarked artists andsongs from your Pandora® profile online.Go to  pandora.com, then click on the “YourProfile”  button above the player. That willbring up a  page with your stations, book-marked artists,  and bookmarked songs.  SoundHound Moves to the SoundHound searching music application. SEEK/TRACK Press briefly to play the next song. TUNERotate the  TUNE knob to search for a station. Press the  TUNE knob to play the station when you find the name that you want.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-4K_UMa_UVO3[USA_EU]AV_PART6.indd   6-4 2016-01-27   오후 4:26:462016-01-27   오후 4:26:4
Pandora® I 6-506Name Description  Current Station Shows the name of the station current displayed.  ShuffleShuffling your stations provides a more diverse mix of music by randomly playing songs from the stations in your list.  Search MenuSorts stations by the items in the menu.•A-Z: Sorts stations in alphabetical order.• By Date: Sorts stations in the order they weregenerated.  Shared Station Icon Indicates that the station is already shared.  SEEK/TRACK Press briefly to play the next song.  TUNERotate the   TUNE knob to move to the previous/next list. Press the   TUNE knob to play a selected file.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-5K_UMa_UVO3[USA_EU]AV_PART6.indd   6-5 2016-01-27   오후 4:26:482016-01-27   오후 4:26:4
6-6 I Apps/InfoSiriusXM™ DataAbout SiriusXM™ Data ServiceThe SiriusXM™ Data Service is a paid membership satellite radio service that provides users with information such as Weather, Sports, Stocks, Fuel Prices and Movies.However, weather information is not supported for vehicles pur-chased in Canada.Accessing SiriusXM™ DataSelect the “SiriusXM Data” icon after selecting All Menus icon or the APPS/ key to enter the SiriusXM™ Data mode.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-6K_UMa_UVO3[USA_EU]AV_PART6.indd   6-6 2016-01-27   오후 4:26:492016-01-27   오후 4:26:4
SiriusXM™ Data I 6-706SiriusXM™ Weather AnnouncementAt the “SiriusXM Data” screen, select the Weather icon to enter the Weather Announcement mode.Weather ForecastThis service provides current weather information and weather forecasts for the next five days in your region. To change the region, select the Other City button and select the desired region.Warnings and Advisories This service provides weather warnings and advisories, such as tornado, storm,flood, etc. K_UMa_UVO3[USA_EU]AV_PART6.indd   6-7K_UMa_UVO3[USA_EU]AV_PART6.indd   6-7 2016-01-27   오후 4:26:502016-01-27   오후 4:26:5
6-8 I Apps/InfoSiriusXM™ Sports InformationSelect the Sports icon to enter the Sports mode.This service provides real-time updated information on scores and schedules for major sports, such as NFL, NBA, NCAA football, NCAA basketball, NHL, MLB, NASCAR and more.My TeamsYou can save teams which you are inter-ested in as part of My teams to easily view related scores and schedules.Select the My Teams menu and then select the Add button to search for and register your favorite teams.Search for your favorite teams and select the   button on the right to add it to the “My Teams” list.You can always check the list of teams that you added in the “My Teams” menu. Select the   button on the right side of the team name to delete the team from “My Teams” or select the Add button to add other teams. K_UMa_UVO3[USA_EU]AV_PART6.indd   6-8K_UMa_UVO3[USA_EU]AV_PART6.indd   6-8 2016-01-27   오후 4:26:512016-01-27   오후 4:26:5
SiriusXM™ Data I 6-906Select the team name to check daily results and recent schedules for that team.SiriusXM™ Stock InformationIn the “SiriusXM Data” screen, select the Stocks icon to enter the Stocks mode. Stocks is a feature that shows the current value and change of stocks.For symbols which you are interested in, select the icon to save the symbol as a part of the “Saved” symbols which can be viewed from the “My Favorites” button on the Stocks Main screen.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-9K_UMa_UVO3[USA_EU]AV_PART6.indd   6-9 2016-01-27   오후 4:26:522016-01-27   오후 4:26:5
6-10 I Apps/InfoMy FavoritesMy Favorites shows a list of stocks added by the user. When entering the Stocks menu for the first time, a screen is dis-played for you to add your favorite stock information. Select the Add button to move to the stock search screen.Stock SearchUse the Stock Search menu to search for specific stocks.Select the   button after searching for your favorite stocks to save them in “My Favorites”.In the My Favorites screen, you can find the selected stock information that you registered.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-10K_UMa_UVO3[USA_EU]AV_PART6.indd   6-10 2016-01-27   오후 4:26:532016-01-27   오후 4:26:5
SiriusXM™ Data I 6-1106SiriusXM™ Fuel Price InformationAt the “SiriusXM Data” screen, select the Fuel Prices icon to enter the Fuel Prices Information mode.Search for Nearby Stations, and Register Key Locations as Favorite Stations.Search for nearby stations with the “Nearby Stations” menu.It shows station locations, starting from the nearest one, and select “Nearest” menu on the top right side to further sort them by price or brand name. Select the   button to the right of the list to register key locations as a Favorite Station so that you can go there again with the “Favorite Stations” menu. K_UMa_UVO3[USA_EU]AV_PART6.indd   6-11K_UMa_UVO3[USA_EU]AV_PART6.indd   6-11 2016-01-27   오후 4:26:542016-01-27   오후 4:26:5
6-12 I Apps/InfoMy Fuel Type SettingsWith the “Filters” menu, you can select fuel types and favorite brands.When searching for Nearby Stations, the results will reflect selected fuel types and brand information.SiriusXM™ Movie InformationSelect the Movies icon to enter the Movie mode.You can check recent movies and nearby theaters, and also register your favorite theater locations.Search for Nearby Theaters, and Register Any Key Locations as Favorite Theaters.In the “Nearby Theaters” menu, you can search for any nearby theaters.It shows theaters, starting from the nearest one, and selecting the “Nearest” menu at the top right side will sort them by name. K_UMa_UVO3[USA_EU]AV_PART6.indd   6-12K_UMa_UVO3[USA_EU]AV_PART6.indd   6-12 2016-01-27   오후 4:26:552016-01-27   오후 4:26:5
SiriusXM™ Data I 6-1306Select the   button to the right of the list to register your favorite theater so that you can always check it again using the “Favorite Theaters” menu and selecting the   button to view the current movie information for that theater.In the “Top Movies” menu, you can check for any movies that are currently popular. Press   button to the right of a movie title to view the plot summary and any other detailed information. K_UMa_UVO3[USA_EU]AV_PART6.indd   6-13K_UMa_UVO3[USA_EU]AV_PART6.indd   6-13 2016-01-27   오후 4:26:572016-01-27   오후 4:26:5
6-14 I Apps/InfoSoundHoundSoundHound is a music search engine. It enables users to identify music by playing or singing a song. It is also possible to search by typing the name of the artist, song, album or lyrics.The head unit should be connected to the Internet in order to use SoundHound. (ex. Wi-Fi)Accessing SoundHound 1.  From the Home screen, select All Menus then selectSoundHound   button.2.  Select SoundHound   button on Radio modes (AM, FM andSiriusXM) or Media modes (CD, Bluetooth Audio, iPod, USB,My Music, AUX and Pandora). SoundHound Main ScreenName Description Mode Displays the current operating mode.  Back button Goes back to previous mode.  What’s that  Song? Starts the song recognition process. After this pro-cess is complete, it goes to Song screen.  Search Goes to Search screen. History Goes to History screen.  Favorites Goes to Favorites screen. Charts Goes to Charts screen.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-14K_UMa_UVO3[USA_EU]AV_PART6.indd   6-14 2016-01-27   오후 4:26:582016-01-27   오후 4:26:5
SoundHound I 6-1506Recognizing MusicAfter selecting SoundHound   button, the song recognition pro-cess is activated, the system will match the currently playing song with the SoundHound music database.Music from Smartphones and MP3 players that are not connected to the head unit can also be recognized.Name Description Now   Listening…Message displayed while SoundHound is processing the music.  Retry Starts over the song recognition process.  Cancel Cancels song recognition process and Exits SoundHound.  Back button Goes back to previous screen.Searching MusicMusic can also be searched by selecting the Search option in SoundHound main screen and typing a song, artist, album or lyr-ics into the search field.Name Description Search Displays the current operating mode.  Back button Goes back to SoundHound main screen.  Search fieldDisplays search field. Once text is typed, recom-mended song, artist, album or lyrics information that might match the search criteria is displayed in the scroll menu.  Search icon Starts the searching process.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-15K_UMa_UVO3[USA_EU]AV_PART6.indd   6-15 2016-01-27   오후 4:26:592016-01-27   오후 4:26:5
6-16 I Apps/InfoSong Main ScreenName Description Back button Goes back to previous screen.  Song, Artist and Album  informationDisplays song, artist and album information of currently playing song.  Album Image If album image is selected, the detailed infor-mation of the album is displayed.  Artist Image If artist image is selected, the detailed informa-tion of the artist is displayed. FavoriteIt saves current playing song into Favorites by tapping on the star icon. Star icon will be highlighted when song has been saved into Favorites. To delete song from Favorites, select  the star icon again or go to Favorites menu screen.  Lyrics Displays current playing song’s lyrics.   Recommended  SongsDisplays a list of recommended songs by SoundHound. Similar Artists Displays list of similar artists to currently play-ing artist.  Song’s Album AppearancesDisplays list of albums on which currently play-ing song appears.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-16K_UMa_UVO3[USA_EU]AV_PART6.indd   6-16 2016-01-27   오후 4:26:592016-01-27   오후 4:26:5
Android Auto I 6-1706Android AutoWhat is Android Auto?You can securely access your smart phone while driving by using this feature. Various functions on your smart phone are displayed on the multimedia system so you can easily use any of them (find-ing the direction, making a call, listening to music, etc.).With Android phone connected, Android Auto appears on the display. Available functions and operations may differ depending on the company model.For more information, visit the Google website http://support.goo-gle.com/androidautoPrecautions•  Android Auto is a registered trademark of Google Inc.•  Android Auto is unavailable if the phone OS is not Android 5.0 (Lollipop) or higher or your phone is unable to be recognized due to a shutdown caused by a failure or defect in the device itself.•  Your phone may not be recognized if its battery is low. Charge your phone then try again.•  If your phone is shut down due to a defect in the device itself, reset your phone and try again.•  If you repeatedly connect and disconnect the USB cable on the device in a short period of time, your phone may malfunction. This can also cause a device failure.•  The device recognition time may differ depending on the device type and firmware/OS version.•  Using the micro-USB cable that came with the phone is rec-ommended. (Using a non-genuine product may cause noise or malfunction.)•  Normal operations are not guaranteed when you arbitrarily manipulate your phone while Android Auto is active.•  Carrier charges may apply when using Android Auto.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-17K_UMa_UVO3[USA_EU]AV_PART6.indd   6-17 2016-01-27   오후 4:27:002016-01-27   오후 4:27:0
6-18 I Apps/Info• Android Auto may not operate normally due to mobile phoneissues.• The following problems may occur due to issues with yourphone.-  Intermittent black screens appear when entering AndroidAuto.-  Unable to differentiate between phones that support Android Auto and those that do not.-  If services do not work properly due to problems similar to the specified above, check your phone, and if necessary, recon-nect your phone after restarting.Using Android Auto Features1.  With Android Auto, connect the micro-USB cable provided bythe mobile manufacturer.2.  On the Home or All Menus screen, select the Android Auto icon.3.  You can use Android Auto’s features, such as navigation,music, and phone.K_UMa_UVO3[USA_EU]AV_PART6.indd   6-18K_UMa_UVO3[USA_EU]AV_PART6.indd   6-18 2016-01-27   오후 4:27:002016-01-27   오후 4:27:0
Android Auto I 6-1906 NOTICE•Before connecting your mobile phone, check whether Android Autois set to ON in the Connectivity Settings menu.•After connecting the mobile phone, you must unlock your phoneand accept the Disclaimers on your phone in order for Android Autoto launch. •The screens and features displayed on the multimedia systemare the same as what Google originally provide. The screens andfeatures are subject to change according to the policy of eachindividual company. Cautions when using Android Auto•Bluetooth media features will be disabled when Android Autois activated. You cannot use Bluetooth Media features such asBluetooth Audio and Pandora. If you want to use these features,disconnect the micro-USB cable.•Android Auto mode does not support the feature that enables you tosearch for music fi les by controlling the  TUNE knob. •If Android Auto is not activated even after a successful connection,check the following:-  Phone Application status (Check if an error has occurred)-  Check if Android Auto has been closed on your phone. -  Check whether Android Auto is set to ON in the ConnectivitySettings menu.•  If Android Auto does not work normally even after a reconnectionhas been made, visit the Google website http://support.google.com/androidautoK_UMa_UVO3[USA_EU]AV_PART6.indd   6-19K_UMa_UVO3[USA_EU]AV_PART6.indd   6-19 2016-01-27   오후 4:27:012016-01-27   오후 4:27:0
MEMOK_UMa_UVO3[USA_EU]AV_PART6.indd   6-20K_UMa_UVO3[USA_EU]AV_PART6.indd   6-20 2016-01-27   오후 4:27:012016-01-27   오후 4:27:0
Climate ModeCamerapart.7 Other FeaturesK_UMa_UVO3[USA_EU]AV_PART7.indd   7-1K_UMa_UVO3[USA_EU]AV_PART7.indd   7-1 2016-01-27   오후 4:27:132016-01-27   오후 4:27:1
7-2 I Other FeaturesOther FeaturesClimate ModeOperating Climate ModePress the CLIMATE key for the climate system to see status infor-mation in the full screen display.While multimedia or navigation is in use, the climate system infor-mation will be displayed over top when you control the tempera-ture (TEMP) or turn on the air conditioner (A/C).Basic Mode ScreenName Description  Set the temperature of the driver's seat and passenger seatsDisplays the configured temperature set-tings for the driver's seat and the passenger seats. Cooling or heating will continue until the temperature matches the configured temperature settings.  The internal temperaure can be con-trolled in incrments of 1°F within a range of 63°F to 89°F.  LOW is displayed when the temperature is set to anything below 63°F, and HIGH is displayed when it is set to anything above 89°F. Air direction Displays the configured air direction settings. Air volume Displays the configured air volume settings  Cooling/heating control status (AUTO)Displayed when the AUTO key is pressed and cooling/heating operates automatically according to the configured temperature settings.  AUTO will be turned off when you try to do the following with AUTO on:- Control the air volume- Control the air direction- Turn the air conditioning (A/C) on/off -  Turn on the moisture removal function for the windshield  Air conditioning control statusDisplayed when the A/C key is pressed and the air conditioning starts cooling/heating.K_UMa_UVO3[USA_EU]AV_PART7.indd   7-2K_UMa_UVO3[USA_EU]AV_PART7.indd   7-2 2016-01-27   오후 4:27:142016-01-27   오후 4:27:1
Climate Mode I 7-307Name Description  Simultaneous tem-perature settings for the driver's seat and the passenger seats (SYNC)Displayed when the SYNC key is pressedand the temperatures of the driver's seat and the passenger seats can be config-ured at the same time.K_UMa_UVO3[USA_EU]AV_PART7.indd   7-3K_UMa_UVO3[USA_EU]AV_PART7.indd   7-3 2016-01-27   오후 4:27:162016-01-27   오후 4:27:1
7-4 I Other FeaturesCamera WARNING- Backing Up & Using Camera•  Never rely solely on the rear view camerawhen backing up. Prior to entering yourvehicle always do a visual check of the areabehind your vehicle, and before backing up be aware of your surroundings and supplementthe rear view camera by looking over yourshoulders and checking your rear view mir-rors. Due to the difficulty of ensuring that thearea behind you remains clear, always backup slowly and stop immediately if you evensuspect that a person, and especially a child,might be behind you.i Information•  A separate chipset is used for the camerascreen while booting up, so it may be different after booting up.Steering-linked camera• This device is connected to a reardetection camera to see behind the carfor safe reversing.• The Rear View Camera turns on auto-matically if you shift the gear to R whenthe power is on or the engine hasstarted.•While the device boots up, shift the gearto "R" to activate the rear detection cam-eras. Shift the gear to another positionto deactivate the rear detection camera. NOTICE•  A wide-angle lens is installed as the reardetection camera to get a wider view, sothere may be some difference betweenthe actual distance and the distance thatappears. on-screen. For safety, make sure toview the back, right, and left sides of the carfor yourself.•   The color of the parking guidelines displayedin the picture may differ from the actualscreen.•  When booted up, blinking may occur whenyou switch to a UI screen.Name Description Red Line About 0.5m from the rear bumper Yellow Line 1 About 1m from the rear bumper Yellow Line 2 About 3m from the rear bumper Yellow Line 3 Trajectory of the wheel on the driver’s side Yellow Line 4 Trajectory of the wheel on the passenger side Blue Line   Neutral steering trajec-toryAs you reverse your car and monitor the area behind your car, the steering-linked driving trajectory and the neutral driving trajectory are both displayed.K_UMa_UVO3[USA_EU]AV_PART7.indd   7-4K_UMa_UVO3[USA_EU]AV_PART7.indd   7-4 2016-01-27   오후 4:27:162016-01-27   오후 4:27:1
Camera I 7-507SVM (Surround View Monitor)With the power on, the SVM is connected to the SVM camera to see the front, rear, and back of the car when driving at low speeds (10km/h or less). It is optional.• The SVM-camera front detection modewill be activated when driving at lowspeeds (10km/h or less). When the cardrives over 10km/h, the SVM camerascreen is disabled.•When the   key is pressed andthe gear is in a position other than P orR while the engine is running, the SVMcamera automatically starts when thecar accelerates.• Shift gears to P or R and turn off the key to disable the front detec-tion camera screen.• The rear detection mode of the SVMcamera is activated with the gear ispositioned to R.Front SVMSelect the   key after starting the engine.If the gear is in a position other than P or R, it automatically switches to the front detection SVM camera mode when the car accelerates.Name Description  SVM Displays all of the images around the car. Front Displays the front image. Front left Displays the front-left image. Front right Displays the front-right image. Settings Displays the Parking Guidance Settings screen.Rear SVMIf the gear is positioned to R, the rear SVM camera is automatically switched to the operational mode.Name Description  SVM Displays all of the images around the car. Rear Displays the rear image. Rear left Displays the rear-left image. Rear right Displays the rear-right image. Settings Displays the Parking Guidance Settings screen.K_UMa_UVO3[USA_EU]AV_PART7.indd   7-5K_UMa_UVO3[USA_EU]AV_PART7.indd   7-5 2016-01-27   오후 4:27:172016-01-27   오후 4:27:1
7-6 I Other FeaturesParking Guidance SettingsName Description Display GuidelinesGuidelines are displayed in the Rear View Camera screen, as shown below. F/R Proximity WarningsProvides a warning when an object is in close proximity to the front or rear of the vehicle. Front View ModeDisplaying the front SVM, select the basic display mode of the camera screen. (SVM, Front left, Front right, and Front.) Rear View ModeDisplaying the rear SVM, select the basic display mode of the camera screen. (SVM, Rear left, Rear right, and Rear.) CAUTION•  A wide-angle lens is installed for the frontdetection camera to get a wider view, sothere may be some difference between theactual distance and the distance that appearsonscreen. For safety, make sure to check thefront, right, and left sides for yourself.K_UMa_UVO3[USA_EU]AV_PART7.indd   7-6K_UMa_UVO3[USA_EU]AV_PART7.indd   7-6 2016-01-27   오후 4:27:192016-01-27   오후 4:27:1
SetupSound SettingsDisplay SettingsPhone SettingsUVO eServices SettingsConnectivity SettingsHome Screen SettingsWi-Fi SettingsClock SettingsVoice Recognition SettingsLanguage SettingsKeyboard SettingsScreen Saver SettingsSystem Infopart.8 SetupK_UMa_UVO3[USA_EU]AV_PART8.indd   8-1K_UMa_UVO3[USA_EU]AV_PART8.indd   8-1 2016-01-27   오후 4:27:292016-01-27   오후 4:27:2
8-2 I SetupSetupSetupSetup is the screen to control Audio sys-tem settings. To enter the screen, press the SETUP key or the Setup icon in All Menus.Features Description SoundProvides the sound con-trol options for Position, Bass, Mid, Treble, Volume and Advanced settings. Display Provides the Mode/Illumination settings. PhoneProvides the Bluetooth Connection/Auto Connection Priority/Bluetooth System Information settings.  UVOeServicesProvides the 911 Connect/Parking Minder/My Car Zone/ Scheduled Diagnostics/Trip Info Sync Reminder Settings. Connectivity Provides connectivity set-tings for Android Auto. Home ScreenProvides the function to customize the three menu items at the bottom of the Home Screen.Features Description Wi-FiProvides the Wi-Fi On and Network Connection settings. Clock Provides the Time and View settings.  Voice  RecognitionProvides the Guidance and Priority settings. LanguageProvides the Change Language settings. KeyboardProvides settings to switch keyboard lay-outs.  Screen SaverProvides the Clock/None settings. System InfoProvides software and storage space informa-tion. Display OffProvides the Display Off (touch activation) function.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-2K_UMa_UVO3[USA_EU]AV_PART8.indd   8-2 2016-01-27   오후 4:27:292016-01-27   오후 4:27:2
Setup I 8-308Sound SettingsAdjusts the sound effects for the whole system.Features Description PositionSelect the Up/Down/Left/Right button to controlsound positioning.Select Center to concen-trate the sound on the center of vehicle. ToneDrag the slide bar to control bass/mid/treble settings.Select Center to initialize the settings.Features Description AdvancedSelect additional audiooptions such as “SpeedDependent VolumeControl” that automaticallycontrols Audio volumeaccording to vehiclespeed as well as “VariableEQ”. Default Resets the sound to fac-tory default settings. Beep Select to activate a beep when pressing buttons.i Information•   Advanced sound settings may differ according to selected AMP option. • The seat shape may differ according tovehicle model.Display SettingsAdjusts the level of illumination for theentire system.Features Description ModeSelect any of LCD illumi-nation change modes:Automatic (changesthe level automatically),Daylight, and Night. IlluminationSet the levels of illumina-tion for day and night.Select Default to initializethe settings. Default Resets the display to fac-tory default settings Display Off Provides the Display Off (touch activation) function.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-3K_UMa_UVO3[USA_EU]AV_PART8.indd   8-3 2016-01-27   오후 4:27:312016-01-27   오후 4:27:3
8-4 I SetupPhone SettingsChanges Bluetooth phone settings.Phone SettingsPress the SETUP key ▶  Select Phoneicon.Bluetooth Connection SettingsPress the SETUP key ▶ Select Phone ▶Select Bluetooth ConnectionFeatures Description Paired Device      ListDisplays the paired Bluetooth device list. When selecting from the list, the device is connected or discon-nected.  Bluetooth     Audio  Connection  StatusAn icon appears when you make a Bluetooth Audio connection.  Bluetooth  Hands-Free  Connection  StatusAn icon appears when you make a Bluetooth Hands-free connection. Add New Register a new Bluetooth device. Delete Devices Select and delete a paired device. Delete All Delete all paired devices. HelpSwitches to the Bluetooth Connection Help screen.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-4K_UMa_UVO3[USA_EU]AV_PART8.indd   8-4 2016-01-27   오후 4:27:322016-01-27   오후 4:27:3
Setup I 8-508i Information•Up to 5 Bluetooth devices can be paired.• Only one Bluetooth device can be connected at a time.• During a Bluetooth device connection,another device cannot be paired.• When you delete a paired device, the CallHistory and Contacts stored in the head unitare also deleted.• Bluetooth Hands-free and Bluetooth Audiofunctions are supported.• Hands-free and audio-supported devices,such as a Bluetooth smartphone or audio,will function normally.• When a Bluetooth device is connected, ifthe Bluetooth connection is unexpectedlydisconnected, due to being out ofcommunication range, the device poweringoff, or a Bluetooth communication error, theBluetooth device automatically searches forand connects to nearby Bluetooth devices.• If the system is not stable, due to a vehicle-Bluetooth device communication error,restore the Default Factory Settings.• For Default Factory Settings, the bluetoothsettings are reset to factory settings • Press the SETUP key ▶ Select Phone ▶ Select Bluetooth System Info ▶SelectDefault Factory SettingsAuto Connection PriorityPress the SETUP key ▶  Select Phone▶Select Auto Connection Priority .When the engine is running, the selected Bluetooth device is automatically con-nected. If you fail to connect the selected device, the previously-connected device is automatically connected, and if it also fails, then it tries to connect all paired devices sequentially.Depending on auto connection priority, connection to a device may take time.Bluetooth System InformationPress the SETUP key ▶Select Phone▶Select Bluetooth System Info .Features Description Vehicle     NameYou can change the Bluetooth device name of the vehicle. PasskeyYou can change the pass-key used for Bluetooth device authentication. the initial passkey is 0000.  Default  Factory  SettingsYou can delete all paired devices and restore the Default Bluetooth Settings. For Default Factory Settings, all paired devices are deleted, and the system is reset to factory settings.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-5K_UMa_UVO3[USA_EU]AV_PART8.indd   8-5 2016-01-27   오후 4:27:332016-01-27   오후 4:27:3
8-6 I Setupi Information •  The vehicle name above is an example.Check the actual information on the product.UVO eServices Settings Within the eServices Settings screen, UVO eServices related features can be set, such as activating 911 Connect, Parking Minder and setting the My Car Zone.For safety reasons, My Car Zone Settings can not be adjusted while driving. Park the vehicle before making any changes to your settings.Press the SETUP key ▶  UVO eServices911 ConnectThis feature is used to turn on or off the 911 Connect feature.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-6K_UMa_UVO3[USA_EU]AV_PART8.indd   8-6 2016-01-27   오후 4:27:332016-01-27   오후 4:27:3
Setup I 8-708When enabing this feature, you must first agree to the 911 Connect tems of use.After reading the tems of use, press the Agree button on the touch screen to accept.Parking MinderIf you want to send vehicle location to your smartphone automatically when you turn the ignition off, turn the Parking Minder feature On.My Car Zone This feature is used to set My Car Zone (Curfew Limit, Speed) alert conditions.My Car Zone Settings is unavailable when UVO eServices has not been activated.Press the SETUP key ▶  UVO eServices ▶ My Car Zone.The PIN must be entered to use My Car Zone Settings.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-7K_UMa_UVO3[USA_EU]AV_PART8.indd   8-7 2016-01-27   오후 4:27:342016-01-27   오후 4:27:3
8-8 I SetupThis screen is used to set Curfew Limit and Speed Alert features.Set the alert conditions On ▶ Settings.Curfew Limit Alert SettingsWithin Curfew Limit Alert Settings, you can set the Curfew Limit Alert Start and End Time. You can also set the Alert Interval of alerts upon Curfew Limit.Speed Alert SettingsWithin Speed Alert Settings, you can set the vehicle speed limit and Alert Interval of alerts upon overspeeding. PINThis feature is used to change the PIN to enter My Car Zone Settings. NOTICE•  Before pressing Done, ensure yoursmartphone is connected to UVO eServicessystem via USB cable.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-8K_UMa_UVO3[USA_EU]AV_PART8.indd   8-8 2016-01-27   오후 4:27:352016-01-27   오후 4:27:3
Setup I 8-908Press the Done button to transmit the new PIN to your My UVO com account.Restore Factory SettingsThis feature is used to restore all My Car Zone alert history and settings back to default state.Scheduled DiagnosticsThis feature is for setting when scheduled diagnostics alerts display.Press SETUP key ▶  UVO eServices ▶ Set the Scheduled Diagnostics On ▶ Settings NOTICE•  For months without the corresponding day, the last day of the month will automatically  be set as the scheduled diagnostics date. K_UMa_UVO3[USA_EU]AV_PART8.indd   8-9K_UMa_UVO3[USA_EU]AV_PART8.indd   8-9 2016-01-27   오후 4:27:372016-01-27   오후 4:27:3
8-10 I SetupTrip Info Sync ReminderTrip Info is a feature used to set whether system displays alert when trip info(Driv-ing Distance, Driving Speed, Driving Time, etc). reaches 90% of memory.UVO eServices must be activated to use this feature.Press SETUP key ▶  UVO eServices ▶  Set Trip Info Sync Reminder OnConnectivity SettingsYou can set Android Auto to activate when an Android device is connected.Android AutoIf Android Auto is checked, you can use the functions of your Android phone with a USB cable and Bluetooth connected. It enables the Android Auto functions. The latest version of Android must be installed on the phone (Android 5.0 and above). While Android Auto is running, you cannot use some features.i Information • This setting is disabled when a device isconnected to the vehicle USB port.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-10K_UMa_UVO3[USA_EU]AV_PART8.indd   8-10 2016-01-27   오후 4:27:392016-01-27   오후 4:27:3
Setup I 8-1108Home Screen SettingsYou can customize the three menu items at the bottom right of the Home Screen into the ones you want.On the Home Screen Settings screen, drag the menu items on the right to the area marked in blue in the screen below.i Information• You can select the Default button to resetto the factory default settings.Wi-Fi SettingsYou can share a digital-device network with the vehicle device through Wi-Fi.Features Description Wi-Fi Turn on/off Wi-Fi.  MAC  Address Displays the MAC address. Refresh Searches available net-works near the vehicle.  Network  NameDisplays available network AP (Access Point) names.  Add Wi-Fi  NetworkEnter the network ID/password to connect to a hidden network AP (Access Point).  Help Shows the Wi-Fi setup guide.How to Connect to a Network1.  In the Wi-Fi settings of a digital device,activate Internet sharing (Hotspot).2.  In the vehicle network list, select thedesired device to connect to. Enterthe password to connect, if any.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-11K_UMa_UVO3[USA_EU]AV_PART8.indd   8-11 2016-01-27   오후 4:27:402016-01-27   오후 4:27:4
8-12 I SetupClock SettingsConfigure the settings for time and date.Using the arrow buttons, you can change the values. Clock settings do not automat-ically change when crossing into different time zones. The time must be changed manually on this screen.Features Description Daylight     Saving TimeThe daylight saving time (DST) is applied.  24 Hours The time display is set in 24-hour format.  Direct entryIf you tap any value, you can directly enter the number in the fol-lowing screen.Voice Recognition SettingsConfigure how to make a call with Voice Recognition Guidance and Voice Recognition.Features Description  BeginnerFor beginners, the voicerecognition system pro-vides voice prompts.  NormalFor normal users, the voice recognition system provides simple and short voice guidances.Language SettingsYou can configure the displayed system language.When the language is changed, the sys-tem language is automatically changed.Unique data including MP3 file name is not changed and voice recognition does not support some languages.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-12K_UMa_UVO3[USA_EU]AV_PART8.indd   8-12 2016-01-27   오후 4:27:412016-01-27   오후 4:27:4
Setup I 8-1308Keyboard SettingsYou can configure the keyboard layout for each language.You can configure ABCD or QWERTY keyboards for the system.i Information• Configured keyboard layouts are appliedto all input modes.Screen Saver SettingsYou can select any of the following screen formats to be displayed when the screen or power is turned off (Press and hold the Power button).• Digital clock and date• Analog clock and date• NoneSystem InfoAt the System Info screen, software ver-sion information, updates, and storage status details are available.Features Description SW InfoSystem version informa-tion and update details are available.Select the Update button to update the system. After update is complete, the system will reboot automatically.  Storage Displays the memory space available for media storage.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-13K_UMa_UVO3[USA_EU]AV_PART8.indd   8-13 2016-01-27   오후 4:27:412016-01-27   오후 4:27:4
8-14 I SetupSystem UpdateAt the System Info screen, insert the USBmemory with the latest file downloaded, and then select the Update button to begin updating. The system will then reboot automatically.i Information • This product needs supplemented softwareupdates and additional functions, whichcollectively may take some time to complete,depending on the amount of data. CAUTION•  If the power is disconnected or the USB isremoved during an update, the data might bedamaged. Please do not turn off the vehiclewhile an update is in progress.K_UMa_UVO3[USA_EU]AV_PART8.indd   8-14K_UMa_UVO3[USA_EU]AV_PART8.indd   8-14 2016-01-27   오후 4:27:432016-01-27   오후 4:27:4
Product SpecificationTroubleshootingFAQpart.9 AppendixK_UMa_UVO3[USA_EU]AV_PART9.indd   9-1K_UMa_UVO3[USA_EU]AV_PART9.indd   9-1 2016-01-27   오후 4:27:572016-01-27   오후 4:27:5
9-2 I AppendixProduct SpecificationTFT-LCD Screen Size  7 inch(152.4 X 91.44 mm)Resolution 384000 pixels (Resolution: 800 x 480)Operating Method TFT(Thin Film Transistor) Active MatrixViewing Angle Left/Right, Top/Bottom: ALL 89° Internal Lighting LED RadioChannels  FM: 87.5 MHz ~ 107.9 MHz(Step: 200 kHz) AM: 530 kHz ~ 1710 kHz(Step: 10 kHz)Sensitivity FM: Under 10 dBu/AM: Under 35 dBuDistortion Factor Within 2 %CommonName Car TFT LCD Display Audio Unit Power Supply DC 14.4 V Operating Power DC 9 V ~ DC 16 VCurrent Consumption 2.5 A Sleep Current1 mA (Head Unit Only)Operating Temperature-20 ~ +70 °C(-4 ~ +158 °F)Storage Temperature-30 ~ +80 °C(-22 ~ +176 °F)Dimensions  178 X 139.2 X 103 (Main Box)Weight 2.3 kgAppendixK_UMa_UVO3[USA_EU]AV_PART9.indd   9-2K_UMa_UVO3[USA_EU]AV_PART9.indd   9-2 2016-01-27   오후 4:27:582016-01-27   오후 4:27:5
Appendix I 9-309Wi-Fi DetailsFrequency 2412 ~ 2462 MHz,5180 ~ 5825 MHzSpecification IEEE802.11 a/b/g/n/acOperatingTemperature-20 ~ +70 °C (-4 ~ +158 °F)SupportedBandwidth  20/40/80 MHzBluetooth® Wireless TechnologyFrequency Range 2402 ~ 2480 MHzSupported Bluetooth® Specification3.0Supported Profile Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0)Output -6~4 dBm (Power Class2, Conducted)Number of Channels  79 channels CAUTION•  The producer and installer cannot provide services related to life safetyas the concerned radio equipment is liable to radio interference.K_UMa_UVO3[USA_EU]AV_PART9.indd   9-3K_UMa_UVO3[USA_EU]AV_PART9.indd   9-3 2016-01-27   오후 4:27:582016-01-27   오후 4:27:5
9-4 I AppendixTroubleshooting1.  Errors which occur during the operation or installation of thedevice may be mistaken as a malfunction of the actual device.2. If you are having problems with the device, try the suggestionslisted below.3. If the problems persist, contact your Kia dealer.Problem Possible CauseThere are small red, blue, or green dots on the screen• Because the LCD is manufactured withtechnology requiring high point density,a pixel or lighting deficiency may occurwithin 0.01% of total pixelsThe sound or image is not working• Has the Switch for the vehicle beenturned to [ACC] or [ON]?• Has the SYSTEM been turned OFF?The screen is being displayed but sound is not working• Has the volume been set to a low level?• Has the volume been muted?When the power is turned on, the corners of the screen are dark• The display appearing somewhat darkafter prolonged periods of use is normal with LCD panels. It is not a malfunction• If the screen is very dark, contact yournearest Kia dealer for assistanceSound is working from only one speaker• Are the positions of Fader or Balancesound controls adjusted to only oneside?Problem Possible CauseSound does not work in AUX mode• Are the audio connector jacks fullyinserted into the AUX terminal?The external device is not working• Is the external device connected with astandard connector cable?Upon turning power on, the most recent mode screen is not displayedWithin modes that play files by reading external sources, such as discs, USB, iPod, or Bluetooth® streaming mode, the most recently played mode screen prior to turning off power may not properly load• If there is no disc or the correspondingdevice is not connected, the mode oper-ated prior to the most recent mode willoperate• If the previous mode still cannot beproperly played, the mode operatedprior to that will operateK_UMa_UVO3[USA_EU]AV_PART9.indd   9-4K_UMa_UVO3[USA_EU]AV_PART9.indd   9-4 2016-01-27   오후 4:27:582016-01-27   오후 4:27:5
Appendix I 9-509Problem Possible Cause  Countermeasure The power does not turnonThe fuse is disconnected•  Replace with a suitable fuse•  If the fuse is disconnected again, please contact your point of purchase or KiadealerDevice is not properlyconnected• Check to see that thedevice has been properlyconnectedThe system does not playThe disc has not been inserted or has been inserted upside down•  Insert the disc properly so that the sides are facingthe correct directThe disc has been contaminated• Wipe away dirt and otherforeign substances fromthe discThe vehicle battery is low• Charge the battery If theproblem persists, contactyour point of purchase orKia dealerA disc not supported by the device has been inserted•  Insert a disc which is sup-ported by the deviceProblem Possible Cause  Countermeasure The image color/tone quality is low• The brightness,saturation, hue, and contrast levels are not set properly• Properly adjust the bright-ness, saturation, hue, andcontrast levels throughDisplay SetupSound doesnot work• The volume levelis set to the lowestlevel• The connection isnot proper•  The device is currently fast-for-warding, rewinding, scanning, or play-ing in slow mode• Adjust the volume level• Check to see that thedevice has been properly connected• The sound will not workwhen the device is fast-for-warding, rewinding, scan-ning, or playing in slowmodeThe sound or image quality is low• Vibration is occur-ring from wherethe conversionswitch has beeninstalled• Image color/tonequality is low• The sound may beshort-circuited and theimage distorted if thedevice vibrates• The device will return tonormal once vibrations stopK_UMa_UVO3[USA_EU]AV_PART9.indd   9-5K_UMa_UVO3[USA_EU]AV_PART9.indd   9-5 2016-01-27   오후 4:27:582016-01-27   오후 4:27:5
9-6 I AppendixProblem Possible Cause  Countermeasure The USB does notwork• USB memory isdamaged• USB memory hasbeen contaminated• A separately pur-chased USB HUBis being used• A USB extensioncable is beingused• A USB which isnot a Metal CoverType USB Memory is being used•  An HDD type, CF, SD Memory is being used• There are nomusic files whichcan be played• Please use the USB afterformatting it.• Remove any foreign sub-stances on the contactsurface of the USB memory and multimedia terminal• Directly connect the USBmemory with the multime-dia terminal on the vehicle• Directly connect the USBmemory with the multime-dia terminal on the vehicle• Use standard USBMemory• Use standard USBMemory• Only MP3, WMA fileformats are supported. Please use only the sup-ported music file formatsThe iPod is not recog-nized even though it has been connected• There are no titleswhich can beplayed• The iPod firmwareversion has notbeen properlyupdated• The iPod devicedoes not recog-nize downloads• Use iTunes to downloadand save MP3 files into the iPod• Use iTunes to updatethe firmware version andreconnect the iPod with the device•  Reset the iPod and recon-nect with the deviceProblem Possible Cause  Countermeasure Bluetoothdoes notwork or itslimitedfunctions areavailable• Bluetooth on yourmobile phone isset to OFF• The Bluetoothconnection is notmade• Android Auto isactive• Set it to ON• Make the connectionactive• Deactivate the modeAndroid Auto does not work with properconnection• Android Autoblocking is madein your phone• The status of theapplication has anerror• Android OS ver-sion not supported• Android Auto Appnot installed•  Non acceptance of request of approval• Release the blocking.• Clear the error.• End the application pro-cess and try again• The latest version ofAndroid must have beeninstalled• Install Android Auto Appthrough Google Play• Accept request of approvalAndroid Auto is connectedfirst timei Information  • While operating the device, if an abnormality occurs that cannot becorrected with the above described measures, press the RESET key toreset the system. • Press and hold the RESET key (over 1 second). The device power willturn off and the system will reset.K_UMa_UVO3[USA_EU]AV_PART9.indd   9-6K_UMa_UVO3[USA_EU]AV_PART9.indd   9-6 2016-01-27   오후 4:27:582016-01-27   오후 4:27:5
Appendix I 9-709FAQAbout Pairing Mobile PhonesQ I cannot pair my mobile phone. What is the cause? A Check to see that the mobile phone supports Bluetooth® func-tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set it to ON. If the cell phone still can’t be registered, try again after turning Bluetooth off and on, or delete the device registration on the multimedia system and cell phone and then register the cell phone again.Q What is the difference between pairing a mobile phone and con-necting a mobile phone? A Pairing occurs through authenticating the head unit and mobile phone. Mobile phones paired to the head unit can be connected and disconnected until the paired mobile phone is deleted from the system. Bluetooth® Handsfree features, such as making/answering calls or managing contacts, are supported only in mobile phones connected with the head unit. Q What is a Passkey? A A passkey is the password used to authenticate the connection between the head unit and mobile phone. The passkey only needs to be entered once when pairing the mobile phone for the first time. The initial passkey is 0000. You can change it with SETUP ▶ Phone ▶ Bluetooth System Info ▶ Passkey menu options. K_UMa_UVO3[USA_EU]AV_PART9.indd   9-7K_UMa_UVO3[USA_EU]AV_PART9.indd   9-7 2016-01-27   오후 4:27:582016-01-27   오후 4:27:5
9-8 I AppendixAbout Making/Answering Phone CallsQ How can I answer a call?A When there is an incoming call, a notification pop-up will become displayed. To answer the incoming call, select the Accept button on the screen or the  key on the steering wheel control.  To reject the call, select the Reject button on the screen or press the  key on the steering wheel control. Q What should I do if I am talking on the Handsfree but want to switch the call to the mobile phone?A While on a call, press and hold (more than 0.8 seconds) the  key on the steering wheel control or select the Use Private button at the bottom of the Phone screen to switch the call to your mobile phone.About Bluetooth® Wireless Technology/Head Unit Use EnvironmentQ What is the range of my wireless connection?A The wireless connection can be used within 15 yards.Q How many mobile phones can be paired?A It is possible to pair up to five mobile phones.Q Why is call quality sometimes poor?A Check the reception sensitivity of the mobile phone when call quality becomes worsened. The call quality may deteriorate when the signal strength is low. Call quality may also worsen if metal objects, such as beverage cans, are placed near the mobile phone. Check to see if there are metal objects in the vicinity of the mobile phone. The call sound and quality may differ depending on the type of mobile phone. K_UMa_UVO3[USA_EU]AV_PART9.indd   9-8K_UMa_UVO3[USA_EU]AV_PART9.indd   9-8 2016-01-27   오후 4:27:592016-01-27   오후 4:27:5
09Important InformationBefore using your Multimedia system, read and follow all instructions and safety information provided in this end user manual ("User's Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences.Keep User's Guide in VehicleWhen kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions and safety information carefully.WarningOperating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may to distract your attention away from the road and remove your hands from the wheel.K_UMa_UVO3[USA_EU]AV_PART9.indd   9-13K_UMa_UVO3[USA_EU]AV_PART9.indd   9-13 2016-01-27   오후 4:27:592016-01-27   오후 4:27:5
General OperationVoice Command ControlFunctions within the Multimedia system may be accomplished using only voice commands. Using voice commands while driving allows you to operate the system without removing your hands from the wheel.Prolonged Views of ScreenDo not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time.Volume SettingDo not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident.Use of Speech Recognition FunctionsSpeech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any speech recognition functions included in the system and address any errors.K_UMa_UVO3[USA_EU]AV_PART9.indd   9-14K_UMa_UVO3[USA_EU]AV_PART9.indd   9-14 2016-01-27   오후 4:27:592016-01-27   오후 4:27:5
09FCC WarningThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• IIncrease the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for helpCaution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum 20 cm between the radiator and your body.This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC.K_UMa_UVO3[USA_EU]AV_PART9.indd   9-15K_UMa_UVO3[USA_EU]AV_PART9.indd   9-15 2016-01-27   오후 4:27:592016-01-27   오후 4:27:5

Navigation menu