HYUNDAI MOBIS AM110D9GG DIGITAL CAR AUDIO SYSTEM User Manual
HYUNDAI MOBIS CO., LTD. DIGITAL CAR AUDIO SYSTEM
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2612616 |
| Application ID | OrAXYaUUhCqkbwkOTqT2UA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 268.24kB (3352942 bits) |
| Date Submitted | 2015-05-13 00:00:00 |
| Date Available | 2015-11-09 00:00:00 |
| Creation Date | 2015-04-06 09:00:35 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2015-05-12 21:56:34 |
| Document Title | K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd.qxd |
| Document Creator | Adobe Illustrator CS2 |
| Document Author: | Administrator |
K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 6 Audio system Using a cellular phone or a twoway radio When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment. JBM005 • Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal. • Multi-Path Cancellation - Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed. CAUTION When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted. When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehicle's electrical system and adversely affect safe operation of the vehicle. WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone. Caring for disc • If the temperature inside the car is too high, open the car windows to ventilate before using the system. • It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means. • Do not apply volatile agents, such as benzene and thinner, normal cleaners and magnetic sprays made for analogue disc onto CDs. • To prevent the disc surface from getting damaged, hold CDs by the edges or the center hole only. • Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge). • Do not damage the disc surface or attach pieces of sticky tape or paper. • Make certain only CDs are inserted into the CD player (Do not insert more than one CD at a time). • Keep CDs in their cases after use to protect them from scratches or dirt. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 7 Audio system • Depending on the type of CDR/CD-RW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording methods. In such circumstances, continued use may cause malfunctions to your audio system. ✽ NOTICE - Playing an NOTE: Order of playing files (folders) : 1. Song playing order : to sequentially. 2. Folder playing order : ❋ If no song file is contained in the folder, that folder is not displayed. Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with international audio CD standards (Red Book), may not play on your car audio. Please note that inabilities to properly play a copy protected CD may indicate that the CD is defective, not the CD player. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 8 Audio system WARNING • Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents. • Do not disassemble, assemble, or modify the audio system. Such acts could result in accidents, fire, or electric shock. • Using the phone while driving may lead to a lack of attention of traffic conditions and increase the likelihood of accidents. Use the phone feature after parking the vehicle. (Continued) (Continued) • Heed caution not to spill water or introduce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction. • Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunction. Continued use in such conditions could lead to accidents (fires, electric shock) or product malfunctions. • Do not touch the antenna during thunder or lightening as such acts may lead to lightning induced electric shock. (Continued) (Continued) • Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents. • Use the system with the vehicle ignition turned on. Prolonged use with the ignition turned off could result in battery discharge. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 9 Audio system CAUTION • Operating the device while driving could lead to accidents due to a lack of attention to external surroundings. First park the vehicle before operating the device. • Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents. • Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impairment. (Adjust the volume to a suitable levels before turning off the device.) (Continued) (Continued) • If you want to change the position of device installation, please inquire with your place of purchase or service maintenance center. Technical expertise is required to install or disassemble the device. • Turn on the car ignition before using this device. Do not operate the audio system for long periods of time with the ignition turned off as such operations may lead to battery discharge. • Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen. (Continued) (Continued) • When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents (alcohol, benzene, thinners, etc.) as such materials may damage the device panel or cause color/quality deterioration • Do not place beverages close to the audio system. Spilling beverages may lead to system malfunction. • In case of product malfunction, please contact your place of purchase or After Service center. • Placing the audio system within an electromagnetic environment may result in noise interference. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 10 Audio system ✽ NOTICE - USING THE USB DEVICE • To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. • If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.) • If the engine is started up or turned off while the external USB device is connected, the external USB device may not work. • The System may not play inauthentic MP3 or WMA files. 1) It can only play MP3 files with the compression rate between 8Kbps ~ 320Kbps. 2) It can only play WMA music files with the compression rate between 8Kbps ~ 320Kbps. • Take precautions for static electricity when connecting or disconnecting the external USB device. • An encrypted MP3 PLAYER is not recognizable. (Continued) 10 (Continued) • Depending on the condition of the external USB device, the connected external USB device can be unrecognizable. • When the formatted byte/sector setting of External USB device is not either 512BYTE or 2048BYTE, then the device will not be recognized. • Use only a USB device formatted to FAT 12/16/32. • USB devices without USB I/F authentication may not be recognizable. • Make sure the USB connection terminal does not come in contact with the human body or other objects. • If you repeatedly connect or disconnect the USB device in a short period of time, it may break the device. • You may hear a strange noise when connecting or disconnecting a USB device. (Continued) (Continued) • If you disconnect the external USB device during playback in USB mode, the external USB device can be damaged or may malfunction. Therefore, disconnect the external USB device when the audio is turned off or in another mode. (e.g, Radio, CD) • Depending on the type and capacity of the external USB device or the type of the files stored in the device, there is a difference in the time taken for recognition of the device. • Do not use the USB device for purposes other than playing music files. • Playing videos through the USB is not supported. • Use of USB accessories such as rechargers or heaters using USB I/F may lower performance or cause trouble. (Continued) K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 11 Audio system (Continued) • If you use devices such as a USB hub purchased separately, the vehicle’s audio system may not recognize the USB device. In that case, connect the USB device directly to the multimedia terminal of the vehicle. • If the USB device is divided by logical drives, only the music files on the highest-priority drive are recognized by car audio. • Devices such as MP3 Player/ Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable. • Charging through the USB may not be supported in some mobile devices. • USB HDD or USB types liable to connection failures due to vehicle vibrations are not supported. (istick type) • Some non-standard USB devices (METAL COVER TYPE USB) can be unrecognizable. (Continued) (Continued) • Some USB flash memory readers (such as CF, SD, micro SD, etc.) or external-HDD type devices can be unrecognizable. • Music files protected by DRM (DIGITAL RIGHTS MANAGEMENT) are not recognizable. • The data in the USB memory may be lost while using this audio. Always back up important data on a personal storage device. • Please avoid using USB memory products which can be used as key chains or cellular phone accessories as they could cause damage to the USB jack. Please make certain only to use plug type connector products. 11 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 12 Audio system ✽ NOTICE - USING THE iPod® DEVICE • Some iPod models may not support communication protocol and files may not properly play. Supported iPod models: - iPhone 3GS/4 - iPod touch 1st~4th generation - iPod nano 1st~6th generation - iPod classic • The order of search or playback of songs in the iPod can be different from the order searched in the audio system. • If the iPod disabled due to its own malfunction, reset the iPod. (Reset: Refer to iPod manual) • An iPod may not operate normally on low battery. (Continued) 12 (Continued) • Some iPod devices, such as the iPhone, can be connected through the Bluetooth® Wireless Technology interface. The device must have audio Bluetooth® Wireless Technology capability (such as for stereo headphone Bluetooth® Wireless Technology ). The device can play, but it will not be controlled by the audio system. • To use iPod features within the audio, use the cable provided upon purchasing an iPod device. • Skipping or improper operation may occur depending on the characteristics of your iPod/Phone device. • If your iPhone is connected to both the Bluetooth® Wireless Technology and USB, the sound may not be properly played. In your iPhone, select the Dock connector or Bluetooth® Wireless Technology to change the sound output (source). (Continued) (Continued) • When connecting iPod with the iPod Power Cable, insert the connector to the multimedia socket completely. If not inserted completely, communications between iPod and audio may be interrupted. • When adjusting the sound effects of the iPod and the audio system, the sound effects of both devices will overlap and might reduce or distort the quality of the sound. • Deactivate (turn off) the equalizer function of an iPod when adjusting the audio system’s volume, and turn off the equalizer of the audio system when using the equalizer of an iPod. • When not using iPod with car audio, detach the iPod cable from iPod. Otherwise, iPod may remain in accessory mode, and may not work properly. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 13 Audio system ■ CD Player ■ Type A-1 ■ Type A-2 (equipped with Bluetooth® Wireless Technology) 13 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 14 Audio system SYSTEM CONTROLLERS AND FUNCTIONS ❈Display and settings may differ depending on the selected audio. Audio Head Unit ■ Type A-1 (for DAB model) FM1 ➟ FM2 ➟ FMA ➟ DAB1 ➟ DAB2 ➟ AM. (3) MEDIA Changes to CD, USB(iPod®), AUX, My Music, BT Audio mode. Each time the key is pressed, the mode is changed in order of CD, USB(iPod®), AUX, My Music, BT Audio. (for Bluetooth® Wireless Technology equipped model) Operates Phone Screen ❈When a phone is not connected, the connection screen is displayed. (4) (1) (EJECT) Ejects the disc. (2) RADIO Changes to FM/AM mode. Each time the key is pressed,the mode is changed in order of FM1 ➟ FM2 ➟ FMA ➟ AM ➟ AMA. 14 PHONE (5) PWR/VOL kob Power Knob: Turns power On/Off by pressing the knob Volume Knob: Sets volume by turning the knob left/right TRACK (6) SEEK , Radio Mode : Automatically searches for broadcast frequencies. CD, USB, iPod®, My Music modes - Shortly press the key (under 0.8 seconds): Moves to next or previous song (file) - Press and hold the key (over 0.8 seconds): Rewinds or fast-forwards the current song. (7) 1 ~ 6 (Preset) Radio Mode: Saves frequencies (channels) or receives saved frequencies (channels) CD, USB, iPod®, My Music mode - 1 RPT : Repeat - 2 RDM : Random In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 15 Audio system (8) • Each time the button is shortly pressed (under 0.8 seconds), sets screen Off ➟ Screen On ➟ Screen Off ❈ Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. (9) TA/SCAN • Radio Mode - Shortly press the key (under 0.8 seconds): TA On/Off - Press and hold the key (over 0.8 seconds): Previews each broadcast for 5 seconds each. • Media mode - Press and hold the key (over 0.8 seconds): Previews each song (file) for 10 seconds each. ❈ Press and holding the key again to continue listening to the current song (file). SETUP (10) CLOCK • Shortly press the key (under 0.8 seconds) : Moves to the Display, Sound, Clock, Phone, System setting modes • Press and hold the key (over 0.8 seconds) : Move to the Time setting screen (11) MEMU Displays menus for the current m ode. ❈ iPod® List : Move to parent category (12) TUNE knob Radio mode : Changes frequency by turning the knob left/right CD, USB, iPod®, My Music mode: Searches .songs (files) by turning the knob left/right. ❈When the desired song is displayed, press the knob to play the song. Moves focus in all selection menus and selects menus FOLDER (13) FOLDER , MP3 CD / USB mode : Folder Search 15 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd Audio system Audio Head Unit (for Type A-2) ■ Type A-2 (14) FM • Changes to FM mode. • Each time the key is pressed, the mode changed in order of FM1 ➟ ➟ FM2 ➟ FMA. (15) AM • Changes to AM ➟ AMA mode. 16 4/6/2015 9:01 AM Page 16 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 17 Audio system ■ CD Player ■ Type A-3 ■ Type A-4 (equipped with Bluetooth® Wireless Technology) 17 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 18 Audio system SYSTEM CONTROLLERS AND FUNCTIONS ❈Display and settings may differ depending on the selected audio. Audio Head Unit ■ Type A-3 (3) MEDIA Changes to CD, USB(iPod®), AUX, My Music, BT Audio mode. Each time the key is pressed, the mode is changed in order of CD, USB(iPod®), AUX, My Music, BT Audio. PHONE (for Bluetooth® Wireless Technology equipped model) Operates Phone Screen ❈When a phone is not connected, the connection screen is displayed. (4) (1) (EJECT) Ejects the disc. (2) RADIO Changes to FM/AM mode. Each time the key is pressed,the mode is changed in order of FM1 ➟ FM2 ➟ AM 18 (5) PWR/VOL kob Power Knob: Turns power On/Off by pressing the knob Volume Knob: Sets volume by turning the knob left/right TRACK (6) SEEK , Radio Mode : Automatically searches for broadcast frequencies. CD, USB, iPod®, My Music modes - Shortly press the key (under 0.8 seconds): Moves to next or previous song (file) - Press and hold the key (over 0.8 seconds): Rewinds or fast-forwards the current song. (7) 1 ~ 6 (Preset) Radio Mode: Saves frequencies (channels) or receives saved frequencies (channels) CD, USB, iPod®, My Music mode - 1 RPT : Repeat - 2 RDM : Random In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 19 Audio system (9) SCAN • Radio Mode - Press the key (under 0.8 seconds): Previews each broadcast for 5 seconds each • CD, USB, My Music mode - Press the key (under 0.8 seconds): Previews each song (file) for 10 seconds each ❈ Press the key again to continue listening to the current song (file). (8) • Each time the button is shortly pressed (under 0.8 seconds), sets screen Off ➟ Screen On ➟ Screen Off ❈ Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. SETUP (10) CLOCK • Shortly press the key (under 0.8 seconds) : Moves to the Display, Sound, Clock, Phone, System setting modes • Press and hold the key (over 0.8 seconds) : Move to the Time setting screen (11) MEMU Displays menus for the current m ode. ❈ iPod® List : Move to parent category (12) TUNE knob Radio mode : Changes frequency by turning the knob left/right CD, USB, iPod®, My Music mode: Searches .songs (files) by turning the knob left/right. ❈When the desired song is displayed, press the knob to play the song. Moves focus in all selection menus and selects menus FOLDER (13) FOLDER , MP3 CD / USB mode : Folder Search 19 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd Audio system Audio Head Unit (for Type A-4) ■ Type A-4 (14) FM • Changes to FM mode. • Each time the key is pressed, the mode changed in order of FM1 ➟ FM2. (15) AM • Changes to AM mode. 20 4/6/2015 9:01 AM Page 20 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 21 Audio system ■ CD Player ■ Type A-5 ■ Type A-6 (equipped with Bluetooth® Wireless Technology) 21 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 22 Audio system SYSTEM CONTROLLERS AND FUNCTIONS ❈Display and settings may differ depending on the selected audio. Audio Head Unit ■ Type A-5 (3) MEDIA Changes to CD, USB(iPod®), AUX, My Music, BT Audio mode. Each time the key is pressed, the mode is changed in order of CD, USB(iPod®), AUX, My Music, BT Audio. PHONE (for Bluetooth® Wireless Technology equipped model) Operates Phone Screen ❈When a phone is not connected, the connection screen is displayed. (4) (1) (EJECT) Ejects the disc. (2) RADIO Changes to FM/AM mode. Each time the key is pressed,the mode is changed in order of FM1 ➟ FM2 ➟ AM 22 (5) PWR/VOL kob Power Knob: Turns power On/Off by pressing the knob Volume Knob: Sets volume by turning the knob left/right TRACK (6) SEEK , Radio Mode : Automatically searches for broadcast frequencies. CD, USB, iPod®, My Music modes - Shortly press the key (under 0.8 seconds): Moves to next or previous song (file) - Press and hold the key (over 0.8 seconds): Rewinds or fast-forwards the current song. (7) 1 ~ 6 (Preset) Radio Mode: Saves frequencies (channels) or receives saved frequencies (channels) CD, USB, iPod®, My Music mode - 1 RPT : Repeat - 2 RDM : Random In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 23 Audio system (9) SCAN • Radio Mode - Press the key (under 0.8 seconds): Previews each broadcast for 5 seconds each • CD, USB, My Music mode - Press the key (under 0.8 seconds): Previews each song (file) for 10 seconds each ❈ Press the key again to continue listening to the current song (file). (8) DISP Each time the button is shortly pressed (under 0.8 seconds), sets screen Off ➟ Screen On ➟ Screen Off ❈ Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. SETUP (10) CLOCK • Shortly press the key (under 0.8 seconds) : Moves to the Display, Sound, Clock, Phone, System setting modes • Press and hold the key (over 0.8 seconds) : Move to the Time setting screen (11) MEMU Displays menus for the current m ode. ❈ iPod® List : Move to parent category (12) TUNE knob Radio mode : Changes frequency by turning the knob left/right CD, USB, iPod®, My Music mode: Searches .songs (files) by turning the knob left/right. ❈When the desired song is displayed, press the knob to play the song. Moves focus in all selection menus and selects menus FOLDER (13) FOLDER , MP3 CD / USB mode : Folder Search 23 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd Audio system Audio Head Unit (for Type A-6) ■ Type A-6 (14) FM • Changes to FM mode. • Each time the key is pressed, the mode changed in order of FM1 ➟ ➟ FM2. (15) AM • Changes to AM mode. 24 4/6/2015 9:02 AM Page 24 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 25 Audio system SETUP Mode Pop up Sound Settings Type A-1, Type A-2, Type A-3, Type A-4 ON . [Mode Pop up] Changes selection mode • During On state, press the RADIO or MEDIA key to display the mode change pop up screen. Press the CLOCK key Select [Sound] through TUNE knob or 2 RDM key Select menu through TUNE knob Display Settings SETUP Press the CLOCK key Select [Display] through TUNE knob or 1 RPT key Select menu through TUNE knob SETUP Scroll text [Scroll text] Set ON / OFF • ON : Maintains scroll • OFF : Scrolls only one (1) time. Song Info When playing an MP3 file, select the desired display info from ‘Folder/File’ or ‘Album/Artist/Song’. 25 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 Audio system Audio Settings This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader and Balance. Select [Audio Settings] Select menu through TUNE knob Turn TUNE knob left/right to set • Bass, Middle, Treble : Selects the sound tone. • Fader, Balance : Moves the sound fader and balance. • Default : Restores default settings. ❈ Return : While adjusting values, re-pressing the TUNE knob will restore the parent menu. 26 Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set [Off/On] of TUNE knob Volume Dialogue Adjusts voice recognition volume. Select [Volume Dialogue] Set volume of TUNE knob 9:02 AM Page 26 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 27 Audio system CLOCK SETTINGS SETUP Press the CLOCK key Select [Clock] through TUNE knob or 3 key Select menu through TUNE knob Clock Settings Day Settings This menu is used to set the time. Select [Clock Settings] Set through TUNE knob Press TUNE knob This menu is used to set the date (DD/MM/YYYY). Select [Day Settings] Set through TUNE knob Press TUNE knob ❈ Adjust the number currently in focus to set the [hour] and press the tune knob to set the [minute]. ❈ Adjust the number currently in focus to make the settings and press the tune knob to move to the next setting. (Set in order of Day/Month/Year) 27 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 28 Audio system Time Format This function is used to set the 12/24 hour time format of the audio system. Select [Time Format] Set 12Hr / 24Hr through TUNE knob Clock Display when Power is OFF Select [Clock Disp.(Pwr Off) Set On / Off through TUNE knob • On : Displays time/date on screen • Off : Turn off. 28 Automatic RDS Time ✽ NOTICE This option is used to automatically set the time by synchronizing with RDS. Select [Automatic RDS Time] Set On / Off through TUNE knob • On : Turn on Automatic Time • Off : Turn off. Because some local radio stations do not support an automatic RDS time function, some RDS Transmitters may not provide correct time. If incorrect time is displayed, set it manually following the Step "Clock Setting" in previous page. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 29 Audio system Phone Setup (Bluetooth® Wireless Technology equipped model) Press the SETUP CLOCK key Select [Phone] Pair Phone Select [Pair Phone] Set through TUNE knob CAUTION To pair a Bluetooth® Wireless Technology enabled mobile phone, authentication and connection processes are first required. As a result, you cannot pair your mobile phone while driving the vehicle. First park your vehicle before use. ➀ Search for device names as displayed on your mobile phone and connect. [Non SSP supported device] (SSP: Secure Simple Pairing) ➁ After a few moments, a screen is displayed where the passkey is entered. Hear, enter the passkey “0000” to pair your Bluetooth® Wireless Technology device with the car audio system. [SSP supported device] ➁ After a few moments, a screen is displayed 6 digits passkey. Hear, check the passkey on your Bluetooth® Wireless Technology device and confirm. ❈ The device name and passkey will be displayed on the screen for up to 3 minutes. If pairing is not completed within the 3 minutes, the mobile phone pairing process will automatically be canceled. ➂ Pairing completion is displayed. ❈ In some mobile phones, pairing will automatically be followed by connection. ❈ It is possible to pair up to five Bluetooth® Wireless Technology enabled mobile phones. 29 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 30 Audio system 30 Phone List • Connecting a phone • Disconnecting a connected phone The names of up to 5 paired phones will be displayed. Select [Phone List] Select mobile phone through TUNE knob Select [Connect Phone] Select [Phone List] Select mobile phone through TUNE knob Select [Disconnect Phone] A [ ] is displayed in front of the currently connected phone. Select the desired name to setup the selected phone. ➀ Select a mobile phone that is not currently connected. ➁ Connect the selected mobile phone. ➂ Connection completion is displayed. ❈ If a phone is already connected, disconnect the currently connected phone and select a new phone to connect. ➀ Select the currently connected mobile phone. ➁ Disconnect the selected mobile phone. ➂ Disconnection completion is displayed. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 31 Audio system • Changing connection sequence (Priority) This is used to change the order (priority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority] through TUNE knob Select No. 1 Priority mobile phone ➀ Select [Priority]. ➁ From the paired phones, select the phone desired for No.1 priority. ➂ The changed priority sequence is displayed. ❈ Once the connection sequence (priority) is changed, the new no. 1 priority mobile phone will be connected. - When the no. 1 priority cannot be connected: Automatically attempts to connect the most recently connected phone. - Cases when the most recently connected phone cannot be connected: Attempts to connect in the order in which paired phones are listed. - The connected phone will automatically be changed to No. 1 priority. • Delete Select [Phone List] Select mobile phone through TUNE knob Select [Delete] ➀ Select the desired mobile phone. ➁ Delete the selected mobile phone. ➂ Deletion completion is displayed. ❈ When attempting to delete a currently connected phone, the phone is first disconnected. Phone book Download This feature is used to download phone book and call histories into the audio system. Select [Phone book Download] Select through TUNE knob CAUTION • The download feature may not be supported in some mobile phones. • When downloading new phone book, delete all previously saved phone book before starting download. CAUTION • When you delete a mobile phone, the mobile phone phone book will also be erased. • For stable Bluetooth® Wireless Technology communication, delete the mobile phone from the audio and also delete the audio from your mobile phone. 31 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 32 Audio system 32 Auto Download Outgoing Volume When connecting a mobile phone, it is possible to automatically download new phone book and Call Histories. Select [Auto Download] Set ON / OFF through TUNE knob This is used to set the volume of your voice as heard by the other party while on a Bluetooth® Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set volume through TUNE knob ❈ Even while on a call, the volume can be changed by using the TRACK key. SEEK , Bluetooth® Wireless Technology System Off This feature is used when you do not wish to use the Bluetooth® Wireless Technology system. Select [Bluetooth System Off] Set through TUNE knob ❈ If a phone is already connected, disconnect the currently connected phone and turn the Bluetooth® Wireless Technology system off. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 33 Audio system Using the Bluetooth® Wireless Technology System To use Bluetooth® Wireless Technology when the system is currently off, follow these next steps. • Turning On Bluetooth® Wireless Technology through the PHONE Key Press the PHONE key Screen Guidance ❈Moves to the screen where Bluetooth® Wireless Technology functions can be used and displays guidance. • Turning On Bluetooth® Wireless Technology through the SETUP CLOCK Key SETUP Press the CLOCK key Select [Phone] knob ➀ A screen asking whether to turn on Bluetooth® Wireless Technology will be displayed. ➁ On the screen, select YES to turn on Bluetooth® Wireless Technology and display guidance. ❈ If the Bluetooth® Wireless Technology system is turned on, the system will automatically try to connect the most recently connected Bluetooth® Wireless Technology mobile phone. CAUTION • Bluetooth® Wireless Technology connection may become intermittently disconnected in some mobile phones. Follow these next steps to try again. 1)Turn the Bluetooth® Wireless Technology function within the mobile phone ON/OFF and try to connect again. 2)Turn the mobile phone power ON/OFF and try to connect again. 3)Completely remove the mobile phone battery, reboot, and then try to connect again. 4)Reboot the audio system and try to connect again 5)Delete all paired devices in your mobile phone and the audio system and pair again for use. 33 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 34 Audio system System Settings Press the SETUP CLOCK key Select [System] Memory Information (if equipped) Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is displayed on the left side while the total system memory is displayed on the right side. ❈ May differ depending on the selected audio. 34 VRS Mode (if equipped) This feature is used to change voice command feedback between Normal and Expert modes. Select [VRS Mode] Set through TUNE knob • Normal : This mode is for beginner users and provides detailed instructions during voice command operation. • Expert : This mode is for expert users and omits some information during voice command operation. (When using Expert mode, guidance instructions can be heard through the [Help] or [Menu] commands. ❈ May differ depending on the selected audio. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 35 Audio system Language SETUP Mode Pop up This menu is used to set the display and voice recognition language. Select [Language] Set through TUNE knob Type A-5, Type A-6 (for Colombia model) [Mode Pop up] Changes On / Off selection mode • During On state, press the RADIO or MEDIA key to display the mode change pop up screen. Display Settings SETUP Press the CLOCK key Select [Display] through TUNE knob or 1 RPT key Select menu through TUNE knob Media Display When playing an MP3 file, select the desired display info from ‘Folder/File’ or ‘Album/Artist/Song’. ❈ The system will reboot after the language is changed. ❈ Language support by region 35 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 36 Audio system SOUND SETTINGS SETUP Press the CLOCK key Select [Sound] through TUNE knob or 2 RDM key Select menu through TUNE knob 36 Sound Settings This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader and Balance. Select [Sound Settings] Select TUNE knob Turn menu through TUNE knob left/right to set • Bass, Middle, Treble : Selects the sound tone. • Fader, Balance : Moves the sound fader and balance. • Default : Restores default settings. ❈Back : While adjusting values, pressing the TUNE knob will restore the parent menu. Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set TUNE knob [Off/On] of K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 37 Audio system CLOCK SETTINGS SETUP Press the CLOCK key Select [Clock] through TUNE knob or 3 key Select menu through TUNE knob Sound Settings This menu is used to set the time. Select [Clock Settings] Set through TUNE knob Press TUNE knob ❈ Adjust the number currently in focus to make the settings and press the tune knob to move to the next setting. (Set in order of Day/Month/Year) Time Format This function is used to set the 12/24 hour time format of the audio system. Select [Time Format] Set 12Hr / 24Hr through TUNE knob. ❈Adjust the number currently in focus to set the [hour] and press the tune knob to set the [minute] and [AM/PM]. Clock Display when Power is OFF Select [Clock Disp.(Pwr Off)] Set On / Off through TUNE knob Calendar Settings This menu is used to set the date (MM/DD/YYYY). Select [Calendar Settings] Set through TUNE knob Press TUNE knob On Off : Displays time/date on screen : Turn off. 37 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 38 Audio system Phone Setup (Bluetooth® Wireless Technology equipped model) Press the SETUP CLOCK key Select [Phone] Pair Phone Select [Pair Phone] Set through TUNE knob CAUTION To pair a Bluetooth® Wireless Technology enabled mobile phone, authentication and connection processes are first required. As a result, you cannot pair your mobile phone while driving the vehicle. First park your vehicle before use. ➀ Search for device names as displayed on your mobile phone and connect. [Non SSP supported device] (SSP: Secure Simple Pairing) ➁ After a few moments, a screen is displayed where the passkey is entered. 38 Hear, enter the passkey “0000” to pair your Bluetooth® Wireless Technology device with the car audio system. [SSP supported device] ➁ After a few moments, a screen is displayed 6 digits passkey. Hear, check the passkey on your Bluetooth® Wireless Technology device and confirm. ❈ The device name and passkey will be displayed on the screen for up to 3 minutes. If pairing is not completed within the 3 minutes, the mobile phone pairing process will automatically be canceled. ➂ Pairing completion is displayed. ❈ In some mobile phones, pairing will automatically be followed by connection. ❈ It is possible to pair up to five Bluetooth® Wireless Technology enabled mobile phones. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 39 Audio system Phone List The names of up to 5 paired phones will be displayed. A [ ] is displayed in front of the currently connected phone. Select the desired name to setup the selected phone. • Connecting a phone Select [Phone List] Select mobile phone through TUNE knob Select [Connect Phone] • Disconnecting a connected phone Select [Phone List] Select mobile phone through TUNE knob Select [Disconnect Phone] ➀ Select a mobile phone that is not currently connected. ➁ Connect the selected mobile phone. ➂ Connection completion is displayed. ❈ If a phone is already connected, disconnect the currently connected phone and select a new phone to connect. ➀ Select the currently connected mobile phone. ➁ Disconnect the selected mobile phone. ➂ Disconnection completion is displayed. 39 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 40 Audio system • Changing connection sequence (Priority) This is used to change the order (priority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority] through TUNE knob Select No. 1 Priority mobile phone ➀ Select [Priority]. ➁ From the paired phones, select the phone desired for No.1 priority. ➂ The changed priority sequence is displayed. ❈ Once the connection sequence (priority) is changed, the new no. 1 priority mobile phone will be connected. - When the no. 1 priority cannot be connected: Automatically attempts to connect the most recently connected phone. - Cases when the most recently connected phone cannot be connected: Attempts to connect in the order in which paired phones are listed. - The connected phone will automatically be changed to No. 1 priority. 40 • Delete Select [Phone List] Select mobile phone through TUNE knob Select [Delete] ➀ Select the desired mobile phone. ➁ Delete the selected mobile phone. ➂ Deletion completion is displayed. ❈ When attempting to delete a currently connected phone, the phone is first disconnected. CAUTION • When you delete a mobile phone, the mobile phone contacts will also be erased. • For stable Bluetooth® Wireless Technology communication, delete the mobile phone from the audio and also delete the audio from your mobile phone. Contacts Download This feature is used to download contacts and call histories into the audio system. Select [Contacts Download] Select through TUNE knob CAUTION • The download feature may not be supported in some mobile phones. • When downloading new Contacts, delete all previously saved Contacts before starting download. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 41 Audio system Auto Download Outgoing Volume When connecting a mobile phone, it is possible to automatically download new Contacts and Call Histories. Select [Auto Download] Set ON / OFF through TUNE knob This is used to set the volume of your voice as heard by the other party while on a Bluetooth® Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set volume through TUNE knob ❈ While on a call, the volume can be changed by using the SEEK , TRACK key. Audio Streaming Songs (files) saved in your Bluetooth® Wireless Technology enabled mobile phone can be played through the audio system. Select [Audio Streaming] Set ON / OFF through TUNE knob CAUTION The Bluetooth® Wireless Technology audio streaming feature may not be supported in some mobile phones. 41 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 42 Audio system Bluetooth® Wireless Technology System Off This feature is used when you do not wish to use the Bluetooth® Wireless Technology system. Select [Bluetooth System Off] Set through TUNE knob ❈ If a phone is already connected, disconnect the currently connected phone and turn the Bluetooth® Wireless Technology system off. Using the Bluetooth® Wireless Technology System To use Bluetooth® Wireless Technology when the system is currently off, follow these next steps. • Turning On Bluetooth® Wireless Technology through the PHONE Key Press the PHONE key Screen Guidance ❈ Moves to the screen where Bluetooth® Wireless Technology functions can be used and displays guidance. 42 • Turning On Bluetooth® Wireless Technology through the SETUP CLOCK Key Press the SETUP CLOCK key Select [Phone] ➀ A screen asking whether to turn on Bluetooth® Wireless Technology will be displayed. ➁ On the screen, select YES to turn on Bluetooth® Wireless Technology and display guidance. ❈ If the Bluetooth® Wireless Technology system is turned on, the system will automatically try to connect the most recently conBluetooth® Wireless nected Technology mobile phone. CAUTION • Bluetooth® Wireless Technology connection may become intermittently disconnected in some mobile phones. Follow these next steps to try again. 1)Turn the Bluetooth® Wireless Technology function within the mobile phone ON/OFF and try to connect again. 2)Turn the mobile phone power ON/OFF and try to connect again. 3)Completely remove the mobile phone battery, reboot, and then try to connect again. 4)Reboot the audio system and try to connect again 5)Delete all paired devices in your mobile phone and the audio system and pair again for use. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 43 Audio system SYSTEM SETTINGS SETUP Press the CLOCK key Select [System] Select menu through TUNE knob Memory Information Language Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is displayed on the left side while the total system memory is displayed on the right side. This menu is used to set the display and voice recognition language. Select [Language] Set through TUNE knob ❈ The system will reboot after the language is changed. ❈ Language support by region - English, Français, Español 43 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 Audio system SETUP Mode Pop up Type A-5, Type A-6 ON . [Mode Pop up] Changes selection mode • During On state, press the RADIO or MEDIA key to display the mode change pop up screen. Display Settings SETUP Press the key Select CLOCK [Display] through TUNE knob or 1 RPT key Select menu through TUNE knob Text Scroll [Text Scroll] Set ON / OFF • ON : Maintains scroll • OFF : Scrolls only one (1) time. Media Display When playing an MP3 file, select the desired display info from ‘Folder/File’ or ‘Album/Artist/Song’. 44 9:03 AM Page 44 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 45 Audio system SOUND SETTINGS SETUP Press the key Select CLOCK [Sound] through TUNE knob or 2 RDM key Select menu through TUNE knob Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set [Off/On] of TUNE knob Sound Settings This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader and Balance. Select [Sound Settings] Select menu through TUNE knob Turn TUNE knob left/right to set • Bass, Middle, Treble : Selects the sound tone. • Fader, Balance : Moves the sound fader and balance. • Default : Restores default settings. ❈ Return : While adjusting values, re-pressing the TUNE knob will restore the parent menu. 45 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 46 Audio system CLOCK SETTINGS Clock Settings This menu is used to set the time. SETUP Press the CLOCK key Select [Clock] through TUNE knob or 3 key Select menu through TUNE knob Select [Clock Settings] Set through TUNE knob Press TUNE knob ❈ Adjust the number currently in focus to make the settings and press the tune knob to move to the next setting. (Set in order of Year/Month/Day) Clock Display when Power is OFF Select [Clock Disp.(Pwr Off) Set On / Off through TUNE knob ❈ Adjust the number currently in focus to set the [hour] and press the tune knob to set the [minute]. Calendar Settings This menu is used to set the date (YYYY/MM/DD). Select [Calendar Settings] Set through TUNE knob Press TUNE knob 46 • • On Off : Displays time/date on screen : Turn off. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 47 Audio system Phone Setup (Bluetooth® Wireless Technology equipped model) Press the SETUP CLOCK key Select [Phone] Pair Phone Select [Pair Phone] Set through TUNE knob CAUTION To pair a Bluetooth® Wireless Technology enabled mobile phone, authentication and connection processes are first required. As a result, you cannot pair your mobile phone while driving the vehicle. First park your vehicle before use. ➂ Pairing completion is displayed. ❈ In some mobile phones, pairing will automatically be followed by connection. ❈ It is possible to pair up to five Bluetooth® Wireless Technology enabled mobile phones. ➀ Search for device names as displayed on your mobile phone and connect. ➁ Input the passkey displayed on the screen. (Passkey : 0000) ❈ The device name and passkey will be displayed on the screen for up to 3 minutes. If pairing is not completed within the 3 minutes, the mobile phone pairing process will automatically be canceled. 47 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 48 Audio system Phone List The names of up to 5 paired phones will be displayed. A [ ] is displayed in front of the currently connected phone. Select the desired name to setup the selected phone. 48 • Connecting a phone Select [Phone List] Select mobile phone through TUNE knob Select [Connect Phone] ➀ Select a mobile phone that is not currently connected. ➁ Connect the selected mobile phone. ➂ Connection completion is displayed. ❈ If a phone is already connected, disconnect the currently connected phone and select a new phone to connect. • Disconnecting a connected phone Select [Phone List] Select mobile phone through TUNE knob Select [Disconnect Phone] ➀ Select the currently connected mobile phone. ➁ Disconnect the selected mobile phone. ➂ Disconnection completion is displayed. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 49 Audio system • Changing connection sequence (Priority) This is used to change the order (priority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority] through TUNE knob Select No. 1 Priority mobile phone ➀ Select [Priority]. ➁ From the paired phones, select the phone desired for No.1 priority. ➂ The changed priority sequence is displayed. ❈ Once the connection sequence (priority) is changed, the new no. 1 priority mobile phone will be connected. - When the no. 1 priority cannot be connected: Automatically attempts to connect the most recently connected phone. - Cases when the most recently connected phone cannot be connected: Attempts to connect in the order in which paired phones are listed. - The connected phone will automatically be changed to No. 1 priority. • Delete Select [Phone List] Select mobile phone through TUNE knob Select [Delete] ➀ Select the desired mobile phone. ➁ Delete the selected mobile phone. ➂ Deletion completion is displayed. ❈ When attempting to delete a currently connected phone, the phone is first disconnected. CAUTION • When you delete a mobile phone, the mobile phone contacts will also be erased. • For stable Bluetooth® Wireless Technology communication, delete the mobile phone from the audio and also delete the audio from your mobile phone. Contacts Download This feature is used to download contacts and call histories into the audio system. Select [Contacts Download] Select through TUNE knob CAUTION • The download feature may not be supported in some mobile phones. • When downloading new Contacts, delete all previously saved Contacts before starting download. 49 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 Audio system Auto Download Outgoing Volume When connecting a mobile phone, it is possible to automatically download new Contacts and Call Histories. Select [Auto Download] Set ON / OFF through TUNE knob This is used to set the volume of your voice as heard by the other party while on a Bluetooth® Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set volume through TUNE knob ❈ While on a call, the volume can be changed by using the SEEK , TRACK key. Audio Streaming Songs (files) saved in your Bluetooth® Wireless Technology enabled mobile phone can be played through the audio system. Select [Audio Streaming] Set ON / OFF through TUNE knob CAUTION The Bluetooth® Wireless Technology audio streaming feature may not be supported in some mobile phones. 50 9:03 AM Page 50 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 51 Audio system Bluetooth® Wireless Technology System Off This feature is used when you do not wish to use the Bluetooth® Wireless Technology system. Select [Bluetooth System Off] Set through TUNE knob ❈ If a phone is already connected, disconnect the currently connected phone and turn the Bluetooth® Wireless Technology system off. Using the Bluetooth® Wireless Technology System To use Bluetooth® Wireless Technology when the system is currently off, follow these next steps. • Turning On Bluetooth® Wireless Technology through the PHONE Key Press the PHONE key Screen Guidance ❈ Moves to the screen where Bluetooth® Wireless Technology functions can be used and displays guidance. • Turning On Bluetooth® Wireless Technology through the SETUP CLOCK Key Press the SETUP CLOCK key Select [Phone] ➀ A screen asking whether to turn on Bluetooth® Wireless Technology will be displayed. ➁ On the screen, select YES to turn on Bluetooth® Wireless Technology and display guidance. ❈ If the Bluetooth® Wireless Technology system is turned on, the system will automatically try to connect the most recently conBluetooth® Wireless nected Technology mobile phone. CAUTION • Bluetooth® Wireless Technology connection may become intermittently disconnected in some mobile phones. Follow these next steps to try again. 1)Turn the Bluetooth® Wireless Technology function within the mobile phone ON/OFF and try to connect again. 2)Turn the mobile phone power ON/OFF and try to connect again. 3)Completely remove the mobile phone battery, reboot, and then try to connect again. 4)Reboot the audio system and try to connect again 5)Delete all paired devices in your mobile phone and the audio system and pair again for use. 51 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 52 Audio system SYSTEM SETTINGS Press the SETUP CLOCK key Select [System] RADIO (for RDS model) ❈ RADIO may differ depending on the selected audio. Changing RADIO mode • Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from 1 ~ 6 will save the currently playing broadcast to the selected key and sound a BEEP. SCAN Memory Information Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is displayed on the left side while the total system memory is displayed on the right side. SEEK TRACK Press the SEEK , key • Shortly pressing the key (under 0.8 seconds): Changes the frequency. • Pressing and holding the key (over 0.8 seconds): Automatically searches for the next frequency. Preset SEEK Press the 1 ~ 6 key • Shortly pressing the key (under 0.8 seconds): Plays the frequency saved in the corresponding key. 52 Press the TA/SCAN key • Pressing and holding the key (over 0.8 seconds): The broadcast frequency increases and previews each broadcast for 5 seconds each. After scanning all frequencies, returns and plays the current broadcast frequency. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 53 Audio system Selecting through manual search Turn the TUNE knob left/right to adjust the frequency. AST (Auto Store) Region Press the MENU key Set [ AST] through TUNE knob or 1 RPT key. Press the MENU key Set [ Region] through TUNE knob or 3 key. The Region option can be turned On/Off. Traffic Announcement (TA) Shortly pressing the TA/SCAN key (under 0.8 seconds): Set ON / OFF TA Traffic Announcement) mode. MENU Within MENU key are the A.Store (Auto Store) and Info functions. News Select AST (Auto Store) to save frequencies with superior reception to presets 1 ~ 6 . If no frequencies are received, then the most recently received frequency will be broadcast. ❈ Saves only to the Preset memory of FMA or AMA mode. AF (Alternative Frequency) Press the MENU key Set [ AF] through TUNE knob or 2 RDM key. The Alternative Frequency option can be turned On/Off. Press the MENU key Set [ News] through TUNE knob or 4 key. The News option can be turned On/Off. Info Volume Info Volume refers to the sound volume upon receiving News or Traffic information. The info volume can be controlled by turning the VOL knob left/right while a news or traffic broadcast is playing. ❈ AF, Region, and News are RDS Radio menus. 53 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 54 Audio system DAB RADIO (for DAB model) Ensemble Press the FOLDER Preset SEEK FOLDER key Press the key ❈ RADIO may differ depending on the selected audio. Changing RADIO mode • Search the Ensemble. Use the Tune knob to select the desired Ensemble and select stations within the Ensemble. Press the RADIO Key to change the mode in order of FM1 ➟ FM2 ➟ FMA ➟ DAB1 ➟ DAB2 ➟ AM. SEEK TRACK Press the SEEK , key • Shortly pressing the key (under 0.8 seconds): Changes the station. • Press and hold the key (over 0.8 seconds): Change the Ensemble. 54 • Shortly pressing the key (under 0.8 seconds): Plays the station saved in the corresponding key. • Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from ~ 6 will save the currently playing station to the selected key and sound a BEEP. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 55 Audio system SCAN MENU L-Band Press the TA/SCAN key • Shortly pressing the key (under 0.8 seconds): TA On/Off • Pressing and holding the key(over 0.8 seconds): The broadcast station increases and previews each broadcasts for 5 seconds each. After scanning all stations, returns and plays the current broadcast station. Within MENU key are the Service.F (Service Following) And L-Band functions. Press the MENU key Set [ LBand] through TUNE knob or 2 RDM key. DAB Broadcasts include BAND III and L-BAND according to the Range. BAND III is always set as the default while the L-BAND feature can be turned on to search for L-BAND broadcasts when in regions where LBAND broadcasts are available. Selecting through manual search Service Following Press the MENU key Set [ Service.F] through TUNE knob or 1 RPT key. When the DAB signal is weak, the Service Following feature will automatically convert to the identical FM broadcast when such a broadcast is available. Turn the TUNE knob left/right to select the station. 55 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 56 Audio system RADIO Preset SEEK SCAN ❈ RADIO may differ depending on the selected audio. Press the 1 ~ 6 key • Shortly pressing the key (under 0.8 seconds): Plays the frequency saved in the corresponding key. • Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from 1 ~ 6 will save the currently playing broadcast to the selected key and sound a BEEP. Press the SCAN key • Shortly pressing the key (under 0.8 seconds): The broadcast frequency increases and previews each broadcast for 5 seconds each. After scanning all frequencies, returns and plays the current broadcast frequency. • Pressing and holding the key (over 0.8 seconds): Previews the broadcasts saved in Preset 1 ~ 6 for 5 seconds each. Changing RADIO mode Changing RADIO mode SEEK TRACK Press the SEEK , key • Shortly pressing the key (under 0.8 seconds): Changes the frequency. • Pressing and holding the key (over 0.8 seconds): Automatically searches for the next frequency. 56 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 57 Audio system Selecting through manual search Turn the TUNE knob left/right to adjust the frequency. MENU AST (Auto Store) Within MENU key are the AST (Auto Store) and Info functions. Press the MENU key Set [ AST] through TUNE knob or 1 RPT key. Select AST(Auto Store) to save frequencies with superior reception to presets 1 ~ 6 . If no frequencies are received, then the most recently received frequency will be broadcast. 57 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 58 Audio system BASIC METHOD OF USE : Audio CD / MP3 CD / USB / iPod® / My Music Press the MEDIA key to change the mode in order of CD ➟ USB(iPod®) ➟ AUX ➟ My Music ➟ BT Audio. The folder/file name is displayed on the screen. Repeat
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2015:04:06 09:00:35+09:00 Modify Date : 2015:05:12 21:56:34+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : Adobe Illustrator CS2 Metadata Date : 2015:05:12 21:56:34+09:00 Thumbnail Width : 256 Thumbnail Height : 24 Thumbnail Format : JPEG Thumbnail Image : (Binary data 3193 bytes, use -b option to extract) Document ID : uuid:D7DF1D666AE4DE118419BEDD5609730B Instance ID : uuid:1fd1c6dc-6210-4fda-a1dd-fee23248be56 Derived From Instance ID : uuid:64D22FEF69E4DE11A584B60365F7353A Derived From Document ID : uuid:63D22FEF69E4DE11A584B60365F7353A Format : application/pdf Title : K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd.qxd Creator : Administrator Page Count : 77EXIF Metadata provided by EXIF.tools