HYUNDAI MOBIS AN240DKAN CAR AVN User Manual 1 of 2

HYUNDAI MOBIS CO., LTD. CAR AVN Users Manual 1 of 2

Contents

Users Manual - 1 of 2

Download: HYUNDAI MOBIS AN240DKAN CAR AVN User Manual   1 of 2
Mirror Download [FCC.gov]HYUNDAI MOBIS AN240DKAN CAR AVN User Manual   1 of 2
Document ID1523733
Application ID14k9PEJ2sBEBiaqzBeUHtA==
Document DescriptionUsers Manual - 1 of 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize412.63kB (5157891 bits)
Date Submitted2011-08-16 00:00:00
Date Available2011-09-30 00:00:00
Creation Date2011-07-05 15:23:28
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2011-08-16 10:02:32
Document TitleUsers Manual - 1 of 2
Document CreatorAdobe InDesign CS4 (6.0.6)

DIGITAL NAVIGATION SYSTEM
User's Manual
Preface
Thank you for purchasing this Audio
Navigation System.
This user's manual explains how to use
the Hyundai Motor Audio Navigation
System.
Before using the product, read the
contents of this user's manual carefully
and use this product safely.
● T he screens shown in this manual
may differ with the actual screens of
the product.
● The design and specification of this
product may change without prior
notification for product improvement.
● W hen transferring the vehicle to
another individual, include this user's
manual so that the next driver can
continue its use.
iPod®
iPod® is a registered trademark of Apple
Inc.
Bluetooth®
The Bluetooth® word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Hyundai is under license.
●A
 reas
that can be checked – 9 areas,
such as Pairing, Connection, Handsfree
Calling, Streaming, etc.
HD Radio™ Technology (if equipped)
HD Radio Technology manufactured
under license from iBiquity Digital
Corporation. U.S. and Foreign Patents.
HD Radio™ and the HD, HD Radio, and
“Arc” logos are proprietary trademarks
of iBiquity Digital Corp.
A Bluetooth® enabled cell phone is required to use Bluetooth® wireless technology.
Bluetooth® phone compatibility can be
checked by visiting www.hyundaiusa.com
a n d u n d e r t h e S E R V I C E & PA R T S –
BLUETOOTH COMPATIBILITY menu.
All Map Database cannot be copied without permission.
This is protected by U.S. copyright laws. All rights not expressly granted are reserved.
You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent.
Introduction… ……………………… 1-2
Sorting items from list… …………… 1-11
Important information about this manual…1-2
Conditions for voice recognition
Precaution for safe usage… ………………1-2
PRE-OVERVIEW
PART 1
PRE-OVERVIEW
system………………………………… 1-11
How to operate menu by voice
Controller and functions … ……… 1-3
command… …………………………… 1-11
Control panel… ……………………………1-3
Steering wheel remote controller…………1-5
Sound setting…………………………… 1-12
 iving voice command… …………… 1-12
HVAC System… ……………………………1-6
FAD/BAL… …………………………… 1-12
Room Mirror… ……………………………1-7
BASS/MID/TREB… …………………… 1-13
Auto volume control ON/OFF… …… 1-13
Basic operation and setting … …… 1-9
Touch screen beep ON/OFF… ……… 1-13
System Power ON… ……………………1-9
Operating Variable EQ… …………… 1-13
Turning the Power ON… …………………1-9
Variable EQ Setup (Optional)…………… 1-13
Turning the Power OFF… …………………1-9
Display mode ………………………… 1-14
Turning the Audio ON/OFF… ……………1-9
Brightness… ………………………… 1-14
Adjusting audio volume………………… 1-10
Display OFF … ……………………… 1-14
How to operate the screen menu… …… 1-10
Display ON …………………………… 1-14
Operating typical screen menu……… 1-10
Display setting… ……………………… 1-14
Inputting letter by using screen
Viewing Current Time…………………… 1-14
keyboard……………………………… 1-10
Display Photo Frame… ……………… 1-15
Displaying the list… ………………… 1-10
Setting the Clock… …………………… 1-15
Selecting an item in a list… ………… 1-11
Setting Display OFF… ………………… 1-15
PRE-OVERVIEW
1-1
PART 1 PRE-OVERVIEW
Introduction
Important information about this
manual
Precaution for safe usage
WARNING !
●Driving
while distracted can result in a loss of
lead to battery discharge.
●Be
cautious not to spill water or introduce
foreign objects into the device.
●D o
not cause severe shock to the device.
This user manual contains instructions related
vehicle control, that may lead to an accident,
Direct pressure onto the front side of the
to safety. Closely observe and comply with all
severe personal injury, and death. The driver’s
monitor may cause damage to the LCD or
of the safety instructions found within this
primary responsibility is in the safe and legal
manual.
operation of a vehicle, and use of any handheld
touch panel.
●In
case of product malfunction, please con-
devices, other equipment, or vehicle systems
tact your place of purchase or service center.
which take the driver’s eyes, attention and
●When cleaning the touch screen, make sure to
Disobeying the warnings listed within this
focus away from the safe operation of a vehicle
turn off the device and use a dry and smooth
user's manual may cause fatal or serious inju-
or which are not permissible by law should
cloth. Never use tough materials, chemical
never be used during operation of the vehicle.
cloths, or solvents (alcohol, ammonia, ben-
WARNING !
ries. Warnings indicate matters which may
directly lead to accidents.
CAUTION!
Disobeying the cautions listed within this user
manual may lead to accidents or cause injury.
Cautions indicate matters which may lead to
vehicle damage or malfunction.
INFORMATION
●Do
while driving.
●Do
not disassemble, assemble, or modify the
Audio Navigation system.
●Do
not watch the screen for prolonged peri-
ods of time while driving.
●S et
the volume to a level which allows the
CAUTION!
●Do
not operate the Audio Navigation system
for prolonged periods of time with the vehi-
1-2
PRE-OVERVIEW
zene, thinners, etc.) as such materials may
damage the device panel or cause color and
quality deterioration.
Reference Page
This indicates the title and page that you
should refer to.
driver to be aware of external conditions.
Information which the user must be aware or
allows for more convenient use of the device.
not operate the Audio Navigation system
cle ignition in ACC. Such operations may
This indicates a key on the control panel.
Voice Command
This indicates an operation by voice command.
Controller and functions
4 SEEK/TRACK Up/Down
• FM/AM Mode : automatically searches for
the previous or next broadcast frequency
and starts playing.
• XM Mode : receives the previous or next
channel.
• CD Mode : plays the previous or next track.
• M P3, USB Mode : Plays the previous or
next file.
• iPod Mode : plays the previous or next song.
● LONG KEY(over 0.8 second)
• FM/AM Mode : quickly moves through the
frequencies while the button is pressed.
Once released, automatically searches for
broadcasts which can be received.
• XM Mode : quickly moves to the previous
or next channel.
• C D Mode : REW/FF the current playing
1 Power / Volume control knob
● P ush
knob (over 0.8 second) : turns the
power off.
● Push
2 FM/AM
Each press will change the bands in the following order: FM1 → FM2 → AM → FM1 ...
knob (under 0.8 second) : each time the
knob is pressed, the Audio is turned on and off.
●T
 une knob : the range of volume adjustment
is between 0 ~ 35.
3 XM
Each press will change the bands in the following order: XM1 → XM2 → XM3 → XM1 ...
track.
5 MEDIA
Each press will change the bands in the following order: DISC(CD, MP3) → (USB or iPod)
→ (AUX) → (Phone Music) → DISC(CD, MP3)...
PRE-OVERVIEW
1-3
PRE-OVERVIEW
● SHORT KEY(less than 0.8 second)
Control panel
PART 1 PRE-OVERVIEW
• MP3, USB Mode : REW/FF the current playing file.
• iPod Mode : REW/FF the current playing
song.
● XM
Displays the Bluetooth® handsfree screen.
INFORMATION
desired channel. After a brief moment, the
If pressing the power off knob for over 0.8 sec-
selected channel will be displayed.
ond and the system does not shut down, and
Mode : push the key to search for the
carefully use and insert a straightened paper
desired track. Press the key to play the
clip at the access hole shown next to the right
selected track.
DISC indicator LED to reset the software.
● CD
6 PHONE
Mode : push the key to search for the
● MP3,
USB Mode : push the key to search
The system power will shut-off and restart.
for the desired file. Press the key to play
the selected file.
7 INFO
Display the Blue Link® screen.
● iPod
Mode : push the key to search for the
desired song. Press the key to play the
8 MAPVOICE
selected song.
● Short Key (under 0.8 second)
• When the screen is turned on : displays
the current time in the center of the
screen.
Displays the map screen for the current position.
15 Clock
12 SETUP
Displays the Setup menu screen.
9 ROUTE
• When the screen is turned off : turns the
full clock screen on and off.
● Long Key (over 0.8 second)
Displays the Route menu screen.
13 ENTER
• Displays the clock setting screen.
Completes the command.
10 DEST
16 DISC eject
Displays the displays setting screen.
14 RESET
Ejects the inserted disc.
Resets the system - if software locks-up.
11 TUNE
● FM/AM
17 DISC insert indicator LED
Mode : push the key to search for
the desired frequency. Press the key to
receive the selected frequency.
1-4
PRE-OVERVIEW
Displays whether a DISC has been inserted.
Steering wheel remote controller
• FM/AM : receives the previous or next preset frequency.
Each time the Mode key is pressed, the mode
changes in the following order: FM1 → FM2
• XM Mode : receives the previous or next
→ AM → XM1 → XM2 → XM3 → (DISC) →
(USB or iPod) → (AUX) → (Phone Music) →
• C D Mode : plays the previous or next
FM1 ...
• M P3, USB Mode : plays the previous or
If an unsupported DISC is inserted, if there is
no disc, or if an external device (e.g. iPod, USB
memory stick, etc.) has not been connected,
the mode will not be recognized and automatically switch to the next mode.
● Press this key for over 0.8 second to turn the
Audio ON and OFF.
● Press
this key when the Power is turned off
to turn the power on.
preset channel.
5 CALL
Press this key to receive an incoming call. If
pressed while in Audio/Navigation mode, the
Bluetooth® handsfree screen will be displayed.
track.
next file.
• i Pod Mode : plays the previous or next
song.
6 END
Press this key to reject an incoming call.
If pressed while on a call, then the call will be
terminated.
● LONG KEY(Over 0.8 second)
• FM/AM Mode : quickly moves through the
frequencies while the key is pressed.
Once released, automatically searches for
broadcasts which can be received.
• XM Mode : quickly moves to the previous
or next channel.
2 Volume Up/Down
Increases or decreases the volume within a
range between 0 ~ 35. Volume for navigation
and voice guidance can be adjusted in the
setup mode.
3 Seek Up/Down
● SHORT KEY(less than 0.8 second)
• CD Mode : REW/FF the current playing track.
• MP3, USB Mode : REW/FF the current playing file.
• iPod Mode : REW/FF the current playing
song.
4 Voice Recognition
Starts Voice Recognition.
PRE-OVERVIEW
1-5
PRE-OVERVIEW
1 MODE
PART 1 PRE-OVERVIEW
Room Mirror
Upon selecting the key, you will be connected
Selecting the room mirror key allows you to
to the Blue Link Center Emergency Rescue
make ser vice related inquiries, POI info
Center. Re-pressing the key will end the call.
searches, and manual rescues by connecting
If you are on a Bluetooth phone call, the call
will end and you will be connected to the Blue
to the Blue Link Center. Such features can be
used only after subscribing to the Blue Link
service.
1 Blue Link Center
Link Emergency Rescue Center.
The incoming POI information can be checked
Makes requests for Blue Link service related
at INFO>Downloaded POI.
inquiries and consultations.
This feature does not operate when you are on a
Upon selecting this key, you will be connected
Bluetooth phone call or when in the camera
to the Blue Link Center service operator.
screen.
Re-pressing the key will end the call.
This feature does not operate when you are
INFORMATION
on a Bluetooth phone call or when in the camera screen.
You cannot talk on the Bluetooth phone and
Blue Link phone simultaneously. When talking
on either the Bluetooth® or Blue Link phone
2 Blue Link for POI
and you place or receive a call on the other
Makes requests for desired POI (point of inter-
phone, the following screen is displayed.
est) information, such as Gas Stations,
Restaurants, etc.
3 Blue Link for SOS
Upon selecting this key, you will be connected
Places request to Blue Link center for assis-
to IVR-POI. Re-pressing the key will end the
tance in cases of vehicle abnormality or when
call.
requiring manual rescue.
1-6
PRE-OVERVIEW
When receiving a Bluetooth call while on
a Blue Link call
PRE-OVERVIEW
When connecting a Blue Link call while
on a Bluetooth call
When connecting a Bluetooth call while
on a Blue Link call
PRE-OVERVIEW
1-7
PART 1 PRE-OVERVIEW
Basic operation and setting
Turning the Power ON
System Power ON
INFORMATION
Turning the Power OFF
If the POWER knob is pressed for over 0.8
second, a beep will sound and the system
power will be turned off.
1. T urn the ignition key onto ACC or ON. If the
As system booting starts from the point the
system power had been on when the igni-
door lock is unlocked, the device may com-
tion was turned off, the system will turn
plete booting before the ACC is turned on or
back on automatically.
the POWER knob is pressed.
Press the POWER knob for under 0.8 second
Consequently, the booting screen may not be
with the system power on to turn the Audio
displayed upon initially turning on the system
on and off.
2. I f the system power had been off when the
ignition was turned off, the system will
power.
remain off. In this case, press the POWER
knob to turn on the system power.
Turning the Audio ON/OFF
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
2. A
 fter the beep sound, say a command.
"Audio On"
"Audio Off"
INFORMATION
Conducting the following operations while
3. O
 nce system booting is complete, the most
recent operated mode will be displayed. For
Audio system.
example, turning on the system will display
● Pressing
FM1 radio mode if the last operated mode
prior to turning off the system had been
FM1 radio mode.
1-8
PRE-OVERVIEW
the AUDIO is off will automatically turn on the
XM
the Audio related keys ( FM/AM ,
, MEDIA ).
● Inserting
device.
a DISC or connecting an external
Adjusting audio volume
● B uttons
which cannot be operated under
the current conditions will be displayed in
to increase the volume and counter-clockwise
disabled state. Pressing a disabled button
to decrease the volume.
will not perform any operation.
INFORMATION
● The range of volume adjustment is between
: Deletes the previously inputted letter.
Pressing for over 0.8 second will delete
all content.
Done
: The input is completed.
: R estores to previous screen. The
Inputting letter by using screen
keyboard
inputted text will not be saved.
Displaying the list
0 ~ 35.
● Adjustments to the volume cannot be made
while the AUDIO is turned off.
How to operate the screen menu
 perating typical screen menu
● If
a menu button on the screen is pressed,
the corresponding function will begin oper-
ABC
ation.
● The
time the button is pressed (under 0.8 seconds or over 0.8 second). For more informa-
●
: Displays the French alphabet keypad.
same menu button may perform differ-
ent functions depending on the length of
: Displays the English alphabet keypad.
(if available)
0-9
: Displays the number and symbol keypad.
List
: Even if input is not complete, the current matching items from the database will be displayed.
INFORMATION
tion, refer to the specific function within this
T he number at the upper-right side of the
user manual.
screen displays the number of current matches.
The current operated button will be highlighted upon display.
PRE-OVERVIEW
1-9
PRE-OVERVIEW
Turn the POWER knob in clockwise direction
Delete
PART 1 PRE-OVERVIEW
Selecting an item in a list
Sorting items from list
How to operate menu by voice
command
Conditions for voice recognition system
Most of the functions within the Audio and
Navigation system can be operated by voice.
Please follow the instructions below for optimal voice recognition performance.
▲
▼
: Moves to the next page or previous
▶
◀
: T he
▶
button will be displayed if
the text is too long to be displayed in
one button.
Press the
▶
Select the desired sorting method to reorganize the list in accordance to the selected
page.
all windows and the sunroof. The
voice recognition can be improved when in
a quiet environment.
● Press
the voice recognition button and say
the desired voice command after the sound
button to move the cursor to
the end of the text. Press the
method.
●C
 lose
◀
button to
move the cursor to the front of the text.
of the beep.
● T he
microphone is positioned above the
driver so that voice commands can be said
while maintaining a proper posture.
● Pronounce
the voice commands naturally
and clearly as if in normal conversation.
1-10 PRE-OVERVIEW
key on the steering wheel
key shortly to input the desired
Sound
Press the
button on the main screen of
voice command. The system voice instruction
each Audio mode (FM/AM, XM, CD, MP3, USB,
comment will immediately terminate. When
iPod) to display the Sound setting screen.
remote controller.
the
A voice command window will be displayed
beep sound, it is possible to input voice com-
on the lower side of the screen followed by
mands.
icon changes into the
icon with a
a "Command please" system voice comment.
2. O
 nce the
icon changes into the
icon
on the pop-up screen with a beep sound,
say the desired voice command.
[Voice command list], page 5-6.
FAD/BAL
[Searching a destination by voice com-
The position of the sound can be adjusted by
mand], page 5-19.
using the up-down and left-right (
▶
◀
▲
▼
) buttons on the left side of the
screen.
Press the
Center
button to position the
sound in the center of the vehicle.
PRE-OVERVIEW 1-11
PRE-OVERVIEW
Press the
1. P
 ress the
Sound setting
INFORMATION
 iving voice command
PART 1 PRE-OVERVIEW
Variable EQ Setup (Optional)
BASS/MID/TREB
The BASS/MID/TREB can be adjusted by using
the left/right buttons (
◀
▶
) of each con-
trol.
the
Sound
Variable EQ
button at the top of
screen.
turned on or off.
INFORMATION
The Auto Volume Control is a function which
automatically adjusts the volume level in
accordance to changes in vehicle speed.
2. W
 ithin the  screen, three
t y p e s o f E Q s e t u p s s u c h a s N o r m a l,
Touch screen beep ON/OFF
Each time the
Dynamic, Concert can be selected.
button is
pressed, the beeping sound that follows each
press on the screen will turn on or off.
1-12 PRE-OVERVIEW
INFORMATION
The Variable EQ feature may not be supported
in some vehicle models and tuner mode.
button is
pressed, the Auto volume control function is
Touch screen beep
button to view specific
Operating Variable EQ
Auto volume control ON/OFF
Auto volume control
Detail
information on the three EQ settings.
1. P
 ress the
Each time the
3. P
 ress the
Display setting
Display mode
Display ON
Press the button for the desired display mode
from
Automatic
Day
, and
Night
Press anywhere on the black screen. The screen
prior to display setting will be displayed.
modes. The current selected mode is highlighted.
Viewing Current Time
● Automatic
The display is automatically converted
Press the
between Daylight and Night modes in
(under 0.8 second) to display the current time
on the front panel shortly
accordance to the on/off state of the vehi-
at the center of the screen.
cle taillights.
●
Press
Display
Setup screen.
button to display the Display
Day
The bright screen is always maintained
regardless of the on/off state of the vehicle
taillights.
● Night
The dark screen is always maintained
regardless of the on/off state of the vehicle
taillights.
Brightness
Use the left/right buttons (
◀
▶
) for con-
trol to make adjustments.
Display OFF
Press the
Display Off
button.
PRE-OVERVIEW 1-13
PRE-OVERVIEW
Press the SETUP key on the control panel to
display the Setup menu screen.
PART 1 PRE-OVERVIEW
INFORMATION
● Time Format
Setting Display OFF
If the screen is turned off, selecting the
When the clock type is digital, this button is
will display the current time on the entire
used to convert the time between 12 hour/ 24
Display Photo Frame
screen.
hour systems.
1. Pre s s t h e
● Daylight Saving Time
Setting the Clock
Press and hold the
Turns the Daylight Saving Time function on or
on the front panel
(over 0.8 second) to display the Clock setting
screen.
off.
Power Off Set
b u t to n i n t h e
DISPLAY setup screen.
2. Pre s s t h e
Photo Frame
b u t to n i n t h e
 setup screen.
INFORMATION
C lock
setting mode can be displayed while
the clock is displayed on the screen even
when the system is turned off.
3. The registered image will be displayed once
power is turned off.
INFORMATION
● GPS Time
The time received from the GPS will be dis-
For
Photo Frame setup, the frame must be set
played automatically.
in USB Image mode. (For details on setting the
● Clock Type
Photo Frame, refer to the USB IMAGE page.)
Selects the clock type shown as the entire
screen when the system power is turned off.
4. T o delete an image registered as a frame,
press the
1-14 PRE-OVERVIEW
Delete Image
button.
PRE-OVERVIEW
PRE-OVERVIEW 1-15
PART 2
1 AUDIO
PRE-OVERVIEW
SYSTEM
PART 2
Audio SYSTEM
Operating the radio ………………… 2-2
Operating the CD Player…………… 2-13
MP3 screen and functions…………… 2-21
Listening to the FM/AM radio… ………2-2
Precautions upon handling discs …… 2-13
Selecting to MP3 music……………… 2-22
FM/AM screen and functions……………2-2
For safe and efficient operation……… 2-13
FM/AM Radio… ……………………………2-2
About CD Player………………………… 2-13
Selecting FM/AM broadcast frequency…2-3
Supported disc formats……………… 2-14
MP3 file… …………………………… 2-23
Storing FM/AM preset… ………………2-4
Disc/Content format compatibility … 2-15
Setting Repeat function for
Scanning FM/AM broadcast frequency…2-5
Inserting a Disc … …………………… 2-16
MP3 file… …………………………… 2-23
HD Radio Technology(if equipped) … ……2-6
Ejecting a Disc … …………………… 2-16
Setting Random function for
Starting HD Radio Mode… ……………2-6
Inserting/Ejecting Disc… …………… 2-16
MP3 file… …………………………… 2-23
CD… …………………………………… 2-17
Scanning MP3 file… ………………… 2-24
HD Radio Mode Screens and
Functions… ……………………………2-6
Listening to CD music… …………… 2-17
Operating HD Radio Mode………………2-6
CD screen and functions… ………… 2-17
HD Radio digital Broadcast On/Off … …2-7
Selecting the CD track… …………… 2-17
XM radio……………………………………2-9
REW/FF CD track……………………… 2-18
Listening to the XM radio… ……………2-9
Setting Repeat function for
XM screen and functions… ……………2-9
S witching the XM mode (Channel /
CD music……………………………… 2-18
Setting Random function for
Category)… ………………………… 2-10
CD music……………………………… 2-18
Selecting XM broadcast channel… … 2-10
Scanning CD track… ………………… 2-19
Storing XM preset… ………………… 2-12
MP3 disc related information and
Scanning XM broadcast channel… … 2-12
precaution …………………………… 2-20
Listening to MP3 music… …………… 2-21
1-16 PRE-OVERVIEW
REW/FF MP3 file……………………… 2-23
Viewing detail information for
PART 2
Audio SYSTEM
AUX screen…………………………… 2-34
Connecting iPod devices… ………… 2-25
AUX……………………………………… 2-34
PRE-OVERVIEW
Operating external devices … …… 2-25
iPod®… ……………………………… 2-25
Listening to iPod music… …………… 2-26
iPod screen and functions…………… 2-26
Selecting an iPod song… …………… 2-27
REW/FF iPod song… ………………… 2-28
Setting Repeat function for
iPod song… ………………………… 2-28
S etting Random function for
iPod song… …………………………… 2-28
 SB MP3 related information and
precaution …………………………… 2-29
Precautions upon handling USB… … 2-29
Connecting the USB… ……………… 2-31
Listening to USB music… …………… 2-31
S tarting USB IMAGE Mode…………… 2-32
USB IMAGE mode menu screen
configuration… ……………………… 2-32
 perating USB IMAGE Mode………… 2-33
Connecting AUX……………………… 2-33
Playing AUX… ……………………… 2-33
PRE-OVERVIEW
2-1
PART 2 AUDIO SYSTEM
Operating the radio
FM/AM Radio
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
Listening to the FM/AM radio
FM/AM screen and functions
" Radio"
"(Radio) AM"
"(Radio) FM"
"(Radio) FM <1 or 2>"
"AM Frequency <530 to 1710>"
"FM Frequency <87.5 to 107.9>"
"AM Preset <1 to 6>"
"FM <1 or 2> Preset <1 to 6>"
1. Press the FM/AM key on the control panel.
The FM/AM radio band of the most recent
listened station will be displayed.
2. P re s s t h e FM/AM k e y t o c h a n g e t h e
desired radio band. Each press will change
the bands in the following order: FM1 →
FM2 → AM → FM1 ...
3. Select the desired broadcast frequency.
[Selecting FM/AM broadcast frequency],
page 2-3.
Mode display : displays the FM1/FM2/ AM
modes.
SEEK/SCAN/PRESET SCAN/AUTO PRESET
indicator : if SEEK/SCAN/PRESET SCAN /
AUTO PRESET is operating, the switch is
displayed.
2-2
3
R-Text
Selecting FM/AM broadcast frequency
gram service name if data is being broad-
If the
is on OFF state, text will not be
There are 3 ways to select the broadcast fre-
cast.
displayed even if there is text being transmit-
quency - (a) selecting through preset, (b)
Frequency : displays the current playing
ted from the broadcast station.
selecting through SEEK, (c) selecting through
R-Text
manual search.
frequency.
If the
Program type name : displays the program
bar will not be displayed. Even if the
type name if data is being broadcast.
in on ON state, text may not be displayed if
Press the preset button of the desired broad-
Radio Text : displays the radio text infor-
text is not being received from the broadcast
cast frequency.
mation if data is being broadcast.
station.
is on ON state, the frequency
R-Text
(a) Selecting a frequency through preset
INFORMATION
Frequency Bar : displays the position of
the current frequency within the total fre-
INFORMATION
c  Auto Store
button : searches the 6 fre-
● Press
the
∧
or
∨
key on the steering
quency range.
quencies with the most superior reception
wheel remote controller shortly. The preset
Current time : displays the current time
and automatically stores as preset buttons
frequencies of the current band will be select-
manually automatically according to the
in corresponding order.
GPS time.
[Storing FM/AM preset], page 2-4.
d  Scan
a  Preset
buttons : the desired frequency
can be preset and selected.
[Storing FM/AM preset], page 2-4.
b  R-Text
ON/OFF button : turns the Radio
Text information on and off.
button : scans all frequencies or
just the preset frequencies for 5 seconds
each.
[Scanning FM/AM broadcast
frequency], page 2-5.
e  Sound
button : adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Sound setting], page 1-12.
ed in order.
● There are 6 preset frequencies each for FM1,
FM2, and AM modes.
[Storing FM/AM preset], page 2-4.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Preset <1 to 6>"
"Preset Up"
"Preset Down"
PRE-OVERVIEW
2-3
PRE-OVERVIEW
Program Service name : displays the pro-
PART 2 AUDIO SYSTEM
(b) S
 electing a Broadcast frequency
through SEEK
Press the
Voice Command
1. Press the
key on the control panel
for less than 0.8 second.
key on the steering wheel
remote controller.
"Seek Up"
indicator blinking), the next or previous
"Seek Down"
broadcast frequency with superior reception
INFORMATION
● Press the
key on the control panel
second. The frequency will become stored
along with a beep sound.
2. A
 fter the beep sound, say a command.
Once the SEEK function is operating (SEEK
will be searched automatically.
2. Press the preset button to store for over 0.8
INFORMATION
Six preset frequencies each for FM1/ FM2/AM
modes can be stored using the above instruc-
(c) Selecting a broadcast frequency through
tions.
manual search
Press the ∨TUNE∧ key to search for desired
(b) Auto store
frequency.
After selecting the desired band, press the
or steering wheel remote controller for
Each click on the ∨TUNE∧ key will increase
more than 0.8 second to quickly move to
or decrease the frequency by 1 step (FM: 0.2
most superior reception will be stored as pre-
the nearest desired frequency. Once the
MHz, AM: 10 kHz).
set buttons in corresponding order.
Auto store
button. The 6 frequencies with the
button is released, the next frequency with
superior reception will be searched auto-
Storing FM/AM preset
matically.
There are 2 ways to store preset frequencies -
I f the
(a) storing manually and (b) auto store.
while operating Auto Store, then the Auto
● I f
the SEEK function is operating, pressing
the
Auto store
button is pressed again
Store operation will be terminated and the
key on the control panel
again will terminate SEEK operation and
(a) Storing manually
select the current frequency.
1. Select the desired frequency.
[ Selecting FM/AM broadcast frequency],
page 2-3.
2-4
INFORMATION
previously played frequency will be restored.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Preset Scan"
Scanning FM/AM broadcast frequency
Scan
button.
(less than 0.8 second) : scans all fre-
quencies and plays only frequencies with
superior reception for 5 seconds each.
Voice Command
1. Press the
key on the steering wheel
PRE-OVERVIEW
"Auto preset"
●S
 CAN
1. P
 ress the
remote controller.
2. A
 fter the beep sound, say a command.
1. Press the
Voice Command
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
2. P
 ress the
Scan
button again to continue
listening to a frequency. The scan will be terminated and the current frequency will continue to be played.
INFORMATION
When scanning has completed an entire revolution, the scan function will terminate automatically and the previous played frequency
will be restored.
"Scan"
●P
 RESET
SCAN (over 0.8 second): scans the
6 frequencies stored as delete this part in
the current band for 5 seconds each.
PRE-OVERVIEW
2-5
PART 2 AUDIO SYSTEM
HD Radio™ Technology(if equipped)
Starting HD Radio Mode
HD Radio Mode Screens and Functions
1. Press the FM/AM key to turn on FM/AM
mode. If an HD Radio broadcast is received
radio mode will switch from analog broad-
cast to HD Radio broadcast.
Contributes to the superior
2. P ress the FM/AM key will conver t the
mode in the order of FM1 → FM2 → AM
user experience of HD Radio Technology.
and convert to HD Radio broadcast once an
cies are saved for convenient frequency
Presents song name, artist, station IDs,
HD Radio broadcast becomes received.
selection. Saves up to HD1~HD8 according
Program Service Data:
HD2/HD3 Channel Guide, and other relevant data streams.
Preset Button: desired HD Radio frequen-
to sub broadcasts.
HD Radio Broadcasting reception display:
Adjacent to traditional main
displays HD Radio main Channel, broad-
stations are ex tra local FM
cast receiving from sub broadcast 1 ~ 8.
channels. These HD2/HD3 Channels pro-
The yellow indicates the currently playing
vide new, original music as well as deep
sub broadcast.
Digital, CD-quality sound. HD
Radio Technology enables local
 roadcast station name
 enre Display : displays the current genre.
Detail On: displays detailed information
H D Radio sub broadcast move button :
cuts into traditional genre.
radio stations to broadcast a clean digital
signal. AM sounds like today’s FM and FM
sounds like a CD.
for current broadcast.
moves from HD Radio main 1 broadcast to
sub 8 broadcast.
2-6
INFORMATION
HD Radio broadcasts simultaneously receive
Operating HD Radio Mode
● Selecting frequency through Preset
● Selecting a Frequency
up to 8 different sub broadcasts for each
PRE-OVERVIEW
channel, allowing users to listen to various
broadcasts. Main 1 broadcast is an HD Radio
broadcast for the same broadcast contents as
analog, while sub 2 ~ 8 are broadcasts of different contents.
This allows you to select previously saved HD
As HD Radio reception is included within
Radio frequencies for broadcast.
Radio mode, the methods of moving between
channels, saving presets, searching, or meth-
1. Press the buttons with HD1~HD8 displayed
ods of searching frequencies are identical.
above the preset button to listen to the cor-
However, while the HD Radio reception is
responding HD Radio channel broadcast.
turned on, the HD Radio related icon display
will become active when within regions
● Selecting frequency through TUNE
where an HD Radio signal can be received.
1. Select a channel receiving HD Radio broadcast automatically or manually and press the
00 button to move to the corresponding HD
Radio channel sub broadcast.
PRE-OVERVIEW
2-7
PART 2 AUDIO SYSTEM
INFORMATION
HD Radio Digital Broadcast On/Off
For HD Radio broadcast channels without sub
HD Radio Broadcasts can be turned on and off
channels, the sub channels of sub numbers
for HD Radio FM and AM mode.
will be skipped to move only to channels
In Setup > Main setup screen, press the On/
which can be received.
Off setting for the desired HD Radio mode.
● Storing a frequency to a preset button
● Storing Manually
This function allows you to manually save the
desired sub broadcast frequency within the
currently playing HD Radio broadcast channel.
Method of saving is identical with the method
of saving radio presets. After saving is complete, the HD Radio sub broadcast number
will be displayed on above the frequency.
2-8
XM radio
Voice Command
1. P
 ress the
Listening to the XM radio
remote controller.
"XM"
key on the control panel.
The XM radio band screen of the most
"XM <1 or 2 or 3>"
recent listened station will be displayed.
"XM Channel <0 to 255>"
egory mode in orange.
"XM <1 or 2 or 3> Preset <1 to 6>"
2. P
 ress the
XM
10
[Selecting XM broadcast channel], page
NAME : displays the artist and other related information.
XM screen and functions
XM3 → XM1 ...
3. Select the desired broadcast channel.
C hannel name : displays the channel
name.
key to change the desired
radio band. Each press will change the
bands in the following order: XM1 → XM2 →
Category mode indicator : displays the cat-
name.
10
2-10.
T itle name : displays the title name.
 ategory name : displays the category
Current time : displays the current time
manually automatically according to the
GPS time.
a  Preset
buttons : the desired channel can
be preset and selected.
[Storing XM
preset], page 2-10.
M ode display : displays the XM1/XM2/
XM3 modes.
SCAN/PRESET SCAN indicator : if SCAN/
b  Mode
buttons : switches between
channel mode and category mode.
[Switching the XM mode], page 2-10.
PRESET SCAN is operating, the switch is
displayed.
PRE-OVERVIEW
2-9
PRE-OVERVIEW
1. Press the
C hannel mode indicator : displays the
channel mode in orange.
2. A
 fter the beep sound, say a command.
XM
C hannel number : displays the current
playing channel.
key on the steering wheel
PART 2 AUDIO SYSTEM
c 
List
button : displays the channel or
category list.
[Selecting XM broadcast
d  Search
button : selects the channel by
directly inputting the channel number.
[Selecting XM broadcast channel], page
2-10.
e  Scan
There are 5 ways to select a broadcast channel
- (a) selecting through preset, (b) selecting
channel], page 2-10.
Voice Command
Selecting XM broadcast channel
with channel Up/Down, (c) Selecting a chan-
1. Press the
key on the steering wheel
remote controller.
2. A
 fter the beep sound, say a command.
nel through manual search, (d) selecting
"Preset <1 to 6>"
through channel/ category list, (e) selecting
"Preset Up"
by directly inputting the channel number.
"Preset Down"
button : scans all frequencies or
just the preset channels for 5 seconds
(a) Selecting a channel through preset
(b) Selecting with Channel Up/Down
each.
Press the preset button of the desired chan-
Press the
nel.
for less than 0.8 second.
[Scanning XM broadcast channel], page
2-10.
f  Sound
button : adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Sound setting], page 1-12.
The previous or next channel will be selected.
INFORMATION
● Press
the
∧
or
∨
wheel remote controller for less than 0.8
band will be selected in order.
Each time the
Mode
button is pressed, the
● There
INFORMATION
key on the steering
second. The preset channels of the current
Switching the XM mode (Channel /
Category)
key on the control panel
are 6 preset channels each for XM1,
XM2, and XM3.
[Storing XM preset], page 2-12.
● If
in Channel mode, the channel is selected
from all channels. If in Category mode, the
first channel of each category is selected.
● Press the
key on the control panel
or steering wheel remote controller for
more than 0.8 second to quickly move to
mode will switch between channel mode and
the nearest desired channel. Once the but-
category mode.
ton is released, the current channel will be
Use the tune knob to change categories and
selected.
press the tune knob change to selected category.
2-10
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
category list
1. Press the
● I f
List
button.
in category mode, the all category list
"Channel Up"
screen will be displayed.
"Channel Down"
Select the desired category button to display the channel list screen for the corre-
(c) S electing a channel through manual
sponding category.
search		
Press the ∨TUNE∧ key to display the previ-
2. Select the desired channel button. The previous screen will be restored and the selected channel will begin playing.
ous or next channel information. After a brief
(e) Selecting channel by directly inputting
moment, the selected channel will be displayed.
the channel number
INFORMATION
1. P ress the
If in channel mode, the channel is selected
Search
button. The channel
input screen will be displayed.
from all channels. If in category mode, the first
channel of each category is selected.
(Category search)
● I f
in channel mode, the all channels list
screen will be displayed.
2. I nput desired channel number, and press
the
OK
button. 			
PRE-OVERVIEW 2-11
PRE-OVERVIEW
2. After the beep sound, say a command.
(d) S electing channel through channel/
PART 2 AUDIO SYSTEM
The previous screen will be restored and the
selected channel will begin playing.
INFORMATION
S ix preset frequencies each for XM1/ XM2/
XM3 modes can be stored using the above
INFORMATION
instructions.
Scanning  XM broadcast channel
inputted are set to disabled state.
1. Press the
● SCAN
key on the steering wheel
Scan
2. A
 fter the beep sound, say a command.
"Channel<0 to 255>"
Storing XM preset
broadcast channel], page 2-7.
Scan
button again to continue
for 5 seconds each if in channel mode. If in
nated and the current channel will continue
category mode, scans all channels within
to be played.
Voice Command
key on the steering wheel
remote controller.
[Selecting XM
1. P
 ress the
playing the channel. The scan will be termi-
1. Press the
1. Select the desired channel.
button.
(under 0.8 second): scans all channels
the current category for 5 seconds each.
remote controller.
key on the steering wheel
remote controller.
"Preset Scan"
the channel range, numbers which cannot be
1. Press the
1. Press the
2. After the beep sound, say a command.
To prevent inputting a channel which exceeds
Voice Command
Voice Command
2. After the beep sound, say a command.
"Scan"
INFORMATION
● W hen
scanning has completed an entire
revolution, the scan function is automatically terminated and the previous played channel will be restored.
● Channel 0 is the radio ID and contains infor-
mation required for XM Activation.
2. Press the preset button for over 0.8 second.
● PRESET
SCAN (over 0.8 second): scans the 6
The frequency will be saved along with
preset channels within the current band for
beep sound.
5 seconds each.
2-12
Operating the CD Player
About CD Player
● Never
place paper on either side of the disc
cautious not to introduce foreign sub-
or write on disc surfaces. Sharp writing
stances into the disc insert slot.
utensils and inks used in felt-tip pens may
Foreign substances may cause damage to
● C lean
fingerprints and dust off the signal
the interior of the device.
● The
device may fail to operate properly in
surface (coated side) of the disc with a soft
extremely hot or cold temperatures.
cloth.
Discontinue the use of the device unless
to prevent it from becoming scratched,
Only soft cloths should be used as there are
normal temperature is maintained.
which may cause the CD to make popping
no grooves for dust to get in as is the case
(T he operational temperature range is:
sounds.
with LPs.
● After using a disc, keep it in the original case
● D o
not use heart-shaped discs, octagon-
shaped discs, or any other abnormally
shaped disc. Such discs may be the cause of
malfunctions.
● Do
not clean discs with chemical solutions
● C opy-protected
-10℃ ~ 65℃).
CDs such as S-type CDs
may not function in the device.
● DATA
CDs are not supported by the device.
(However, such discs may operate abnormally.)
can be condensed on the fiberoptic
lens due to rain, wet conditions, or upon
operating the heating system.
● Skipping may occur to the audio when driv-
ing on bumpy roads for prolonged periods
of time or upon severe shock to the vehicle.
such as record sprays, antistatic sprays, antistatic liquids, benzene, or thinners. Such
For safe and efficient operation
materials may cause the surface of DISC to
● Do
be unrecoverable.
● Steam
not disassemble the CD Player for repair
● D o
not use chemical solvent to clean the
device. Such solvents may cause damage to
purposes. Contact your place of purchase in
the surfaces of the device.
● Do not expose the disc to direct sunlight for
the case of malfunction. (Complete service
Always use a clean and dry cloth.
prolonged periods of time. Such exposure
assistance will not be provided if the user
may lead to disc deformation.
● D ust,
scratch, and other substances may
disassembles the device.)
● Do not use water to clean the device.
cause popping sound while playing as well
Exposure to water may cause damage to
as sound deterioration.
the device.
PRE-OVERVIEW 2-13
PRE-OVERVIEW
cause damage to disc surfaces
Precautions upon handling discs
● B e
PART 2 AUDIO SYSTEM
WARNING !
Disc Type
Always pay full attention to driving.
Avoid operating your system in such a way
that you are distracted from driving your vehicle.
Disc Media
DIsc Format
CD
CD-DA
CD-R
MP3
CD-RW
WMA
Multisession-CD
DTS-CD
CD-ROM
CD
CD-G
Supported disc formats
CD-EXTRA
● The
CD-TEXT
disc types supported by this device are
as shown below.
Disc Size
Disc format
Audio format
3-inch (7.6 cm)
CD
LPCM
5-inch (12.7cm)
MP3
MPEG1, Layer3
●
ognized by the device.
MPEG2, Layer3
MPEG2.5
WMA
2-14
Ver9
CD-R or CD-RW DISC burned with a bulk CD
without quality guarantees may not be rec-
●
I nserting an abnormal disc may result in
faulty operation or recognition.
Disc/Content format compatibility
However, other contents may cause abnor-
●
● Ordinary disc compatibility
mal disc operation such as noise.
This device plays audio files compressed by
• This device has been designed/ manufac-
• The writing of CD-R and CD-RW discs with
this device is not supported.
• Although CD-R/RW discs burned as audio
ing the following logo marks.
MPEG-1 audio stream layer 3(MP3) using 32,
44.1 and 48kHz fixed bit rates. Incompatible
files are not supported.
CDs which have not been finalized are not
• Variable bit rate files may operate, but the
supported by the device, some information
play time information may not be properly
such as play time may be displayed.
displayed.
• PC-created DISC compatibility.
• When recording a disc with a personal com-
• Physical formats of CD : Model 1, Model 2
•C
 D-R/RW discs (Audio CD and MP3 CD) cre-
puter, even discs recorded in a "format com-
• This device only supports tracks with file
ated with CD-writing devices or personal
patible" with the formats described above
computers may not properly function in the
may not operate on the device caused by
device. This may be caused by damaged
software settings of the recording applica-
recording method, contamination by dirt
tion. In such cases, contact the software
and other foreign substance on the disc sur-
developer.
Audio-CD
CD-R
CD-RW
faces or play lens, and various other reasons.
●
Special formats or special features regarding software
• CD-R/RW Compatibility.
• This device operates as a CD-ROM including
CD-R and CD-RW DISC written in CD Audio
•A
 dditional information regarding compati-
XA format 1.
extension of ".MP3" or ".WMA".
• This device does not support multi-session
discs.
• T his device supports a maximum of 256
folders and maximum 512 files.
Folders and files which exceed this limit will
bility can be found on the CD-R/ RW soft-
not be supported.
ware disc box.
• T here are various bit rates which can be
DVD-R/RW are not supported by the device.
encoded onto a MP3 file.
This device has been designed to be compatible with various bit rates.
Audio which has been encoded at 128kbps
will sound similar to CD audio sound quality.
or MP3 CD Format.
PRE-OVERVIEW 2-15
PRE-OVERVIEW
tured to be compatible with software bear-
Compressed audio compatibility
PART 2 AUDIO SYSTEM
Although this device supports low bit rate
Inserting/Ejecting Disc
MP3 tracks, such tracks may only provide
INFORMATION
● I f
the operation mode had been in Audio
Inserting a Disc
mode before ejecting the disc, the device
Insert the disc into the slot.
will be converted back to Audio mode.
95k bps ~ 192kbps bit rate range and
The disc will begin playing automatically after
If the operation mode had been in
44.1kHz SAMPLING frequency is recom-
it has been inserted.
Navigation mode, then Navigation mode
low quality sound.
• For stable operation, the use of files in
mended.
INFORMATION
the disc is straddled on the slot without
If the operation mode had been Audio mode
removing for approximately 10 seconds, the
before inserting the disc, the device will con-
disc will be re-inserted automatically into
vert to the DISC mode screen and begin play-
the disc player.
ing.
In such a case, the disc will not begin play-
If the operation mode had been Navigation
ing automatically.
mode, then Navigation mode screen will
remain and the disc play status will be displayed through the Audio bar.
Ejecting a Disc
Press the
key.
The disc will immediately be stopped and
ejected.
2-16
screen will remain.
● If
CD
CD screen and functions
b  Random button : plays the tracks on the
disc in random order. 			
Listening to CD music
[Setting R andom func tion for CD
c  Scan
control panel if the CD is already inserted.
2. S elect the desired track.
[Selecting the
[Scanning CD track], page 2-19.
d  Sound
CD track], page 2-15.
Voice Command
1. Press the
key on the steering wheel
button : scans all tracks on the
disc for 10 seconds each.
button : adjusts the FAD/BAL,
BAS, MID, TRE controls.
[Sound setting], page 1-12.
M ode display : displays that the current
mode is CD mode.
remote controller.
R EPEAT/RANDOM/SCAN indicator : if
Selecting the CD track
"DISC"
REPEAT/RANDOM/SCAN is operating, the
There are 2 ways to select a CD Track - (a)
"CD"
switch is displayed.
selecting through Track Up/Down, (b) select-
T rack number : displays the track number.
 lay Time : displays the play time.
Current time : displays the current time
ing through searching Track.
manually automatically according to the
Press the
GPS time.
or steering wheel remote controller for less
2. After the beep sound, say a command.
"CD Track <1 to 665>"
(a) Selecting through Track Up / Down
key on the control panel
than 0.8 second. The next or previous track
a  Repeat buttons : repeat the current play-
will begin playing.
ing track.
[Setting Repeat function for CD music],
page 2-18.
PRE-OVERVIEW 2-17
PRE-OVERVIEW
1. Insert the CD or press the MEDIA key on the
music], page 2-18.
PART 2 AUDIO SYSTEM
INFORMATION
I f the
key on the control panel or
2. Press the ENTER
key at the desired track.
The searched track will begin playing.
steering wheel remote controller is pressed
REW/FF CD track
than 3 seconds, the start of the current track
Press and hold the
will begin playing. If the track has been play-
trol panel or steering wheel remote controller
ing for less than 2 seconds, the start of the
for over 0.8 second.
previous track will begin playing.
The track will play 20 times faster while hold-
1. P
 ress the
key on the con-
ing the button and return to normal play
when the button is released.
2. After the beep sound, say a command.
"Next Track"
"Previous Track"
Setting Repeat function for CD music
Press the
Repeat
button. Each press will
change the function in the following order:
REPEAT → REPEAT OFF → REPEAT
● REPEAT : repeats the current playing track.
(b) Selecting track through search
1. Pre s s the ∨TUNE∧ key to search for
desired to display track. Each click on the
∨TUNE∧ key will display the information
of the next or previous track. The current
playing track will continue to be played.
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Repeat Track"
Say "Normal Play" in order to terminate the
set Repeat.
2-18
Random
button. Each press will
● RANDOM
: plays all tracks in the disc in ran-
dom order.
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
key on the steering wheel
remote controller.
Press the
change the function in the following order:
RANDOM → RANDOM OFF → RANDOM...
shortly while the track has played for more
Voice Command
Setting Random function for CD music
"Random"
Say "Normal Play" in order to terminate the
set Random function.
Scanning CD track
1. Press the
Scan
INFORMATION
button. Each press will
When scanning has completed an entire revo-
change the function in the following order:
SCAN → SCAN OFF → SCAN...
lution, the scan function is automatically ter-
: scans all tracks in the disc for 10 sec-
minated and the previous played track will be
PRE-OVERVIEW
● SCAN
restored.
onds each.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Scan"
Say "Normal Play" in order to terminate the
set Scan function.
2. Press the
Scan
button again to continue
listening to the track. The scan will be terminated and the current track will continue to
be played.
PRE-OVERVIEW 2-19
PART 2 AUDIO SYSTEM
MP3
MP3 disc related information and
precaution  
● Information
• The MP3 file standards supported by the
device are as follows.
• Acceptable standard: MPEG1 AUDIO LAYER 3
• Acceptable sampling frequency: 32, 44.1, 48
(KHz)
• Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96,
112, 128, 160, 192, 224, 256, 320 (Kbps)
• R ecommended bit rate & reference sampling frequency: 96,128, 192 Kbps fixed bit
rate /44.1KHz
• ID3 tag
• Supported media formats
as the scroll function does not operate when
LEVEL2. Detailed specification is as below.
displaying folder names.
• Maximum directory layers: 8 layers
• Maximum folder length: 64 Bytes, file name
length: 64 Bytes
• Supported characters for folder name/ file
name: Alphanumeric characters, Korean
standard character set 2350 characters,
Simplified Chinese 4888 characters
• Maximum number of folders which can be
stored onto one disc: 256 folders (including
ROOT directory)
• M aximum number of files which can be
stored onto one disc: 512 files
• Precautions upon burning MP3 files
• The use of ISO 9660 LEVEL 2 JOLIET format
This device supports ID3v1.0, ID3v1.1,
is recommended when burning MP3 files.
ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.
Burning in other formats may abnormally
• Supported media
The MP3 media supported by the device are
CD-ROM and USB.
display the file names.
• It is possible to display up to 32 characters for
file and folder names in case of UNICODE, and
up to 64 characters in case of ASCII. Although
the full length of the file name can be displayed by using the scroll function, the full
2-20
length of folder names may not be displayed
This device supports ISO9660 LEVEL1 and
● Precaution
Please use a MP3 bit rate which is less than
128 kbps. The sound quality cannot be guaranteed for MP3s exceeding 128kbps.
Listening to MP3 music
MP3 screen and functions
 Info On/Off button : displays or hides the
detailed file information for the current
on the control panel if the MP3 disc is
already inserted.
2. S elect the desired file.
[Viewing detail information for MP3
file], page 2-23.
[Selecting the MP3
Voice Command
M ode display : displays that the current
mode is MP3 disc mode. (MP3 files on DVD
discs are not supported.)
remote controller.
R EPEAT/RANDOM/SCAN indicator : if
"DISC"
REPEAT/RANDOM/SCAN is operating, the
"CD"
switch is displayed.
"MP3"
button : displays the MP3 folders
and file lists for the disc.
c  Repeat button : repeats the current play-
ing folder or file.
key on the steering wheel
2. After the beep sound, say a command.
b  List
[Selecting the MP3 file], page 2-21.
file], page 2-19.
1. Press the
playing file.
 lay Time : displays the play time.
F older name : displays the folder name.
F ile name : displays the file name.
Current time : displays the current time
[Setting repeat function for MP3 file],
page 2-23.
d  Random button : plays all files on the disc
or folder in random order.
[Setting random function for MP3 file],
page 2-23.
f  Scan
button : scans all files on the disc
or folder for 10 seconds each.
manually automatically according to the
GPS time.
PRE-OVERVIEW 2-21
PRE-OVERVIEW
1. I nsert the MP3 disc or press the MEDIA key
PART 2 AUDIO SYSTEM
Selecting to MP3 music
2. After the beep sound, say a command.
(c) Selecting through MP3 List
1. Press the
List
There are 3 ways to select an MP3 file - (a)
"Next File"
selecting through file up/down, (b) selecting
"Previous File"
folder for the current playing file will be dis-
button. The file list of the
through searching files, (c) selecting through
"Next Folder"
played.
MP3 list.
"Previous Folder"
INFORMATION
(a) Selecting through File Up / Down
(b) Selecting through search
If many songs and folders are recorded onto a
Press the
key on the control panel
1. P
 ress the ∨TUNE∧ k e y to s e a rc h fo r
DISC, file loading time may be longer and
or steering wheel remote controller for less
desired to display file. Each click on the
cause the play list to be improperly displayed
than 0.8second. The next or previous file will
∨TUNE∧ key will display the information
or song search through TUNE operation to
of the next or previous file. The current play-
operate improperly. In such cases, wait until file
ing file will continue to be played.
loading is complete and try again.
begin playing.
INFORMATION
If the
key on the control panel or
INFORMATION
steering wheel remote controller is pressed
If the operation of the Tune knob is too rapid,
shortly while the song has played for more
there may be a delay in displaying the file
than 3 seconds, the start of the current song
information.
will begin playing. If the song has been playing for less than 2 seconds, the start of the
previous song will begin playing.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2-22
2. Press the ENTER
key at the desired file.
The searched file will begin playing.
2. P ress the desired menu to return to the
main screen and play the selected file.
CAUTION!
REW/FF MP3 file
Press and hold the
key on the con-
trol panel or steering wheel remote controller
the ID3 TAG info is not included in the
MP3 file, the artist/song title/genre information may not be displayed.
The file will play 20 times faster while holding
● ID3 TAG : Standard format being used to add
the button and return to normal play when
various information to the MP3 file, such as
the button is released.
song title, copyrighter, music channel, etc.
Random
Press the
button.
Each press changes the setting as follows :
Random → Folder Random → Random Off →
Random ...
● Folder
Random : plays the files in the cur-
rent folder in random order.
● Random : plays all files in the disc in random
Viewing detail information for MP3 file
1. Press the
Info On
button. The detailed
information (Title, Artist, Album, Genre) for
the current playing MP3 will be displayed.
Setting Repeat function for MP3 file
Press the
Repeat
button.
Each press will change the function in the following order: Repeat → Folder Repeat →
Repeat Off → Repeat ...
● Repeat : repeats the current playing file.
● Folder
Repeat : repeats the files in the cur-
rent folder.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Random"
"Random Folder"
Voice Command
1. Press the
order.
Say "Normal Play" in order to terminate the
set Random function.
key on the steering wheel
remote controller.
2. P ress the
Info Off
button. The detailed
information will be turned off.
2. After the beep sound, say a command.
"Repeat File"
"Repeat Folder"
Say "Normal Play" in order to terminate the
set Repeat function.
PRE-OVERVIEW 2-23
PRE-OVERVIEW
for over 0.8 second.
● I f
Setting Random function for MP3 file
PART 2 AUDIO SYSTEM
INFORMATION
Scanning MP3 file
1. Press the
Scan
button.
When scanning has completed an entire revo-
Each press will change the function in the following order : Scan → Folder Scan → Scan Off
lution, the scan function is automatically ter-
→ Scan ...
restored.
● Folder
Scan : plays all files in the current
folder for 10 seconds each.
● S can:
scans all files in the disc for 10 sec-
onds each.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. A
 fter the beep sound, say a command.
"Scan"
"Folder Scan"
Say "Normal Play" in order to terminate the
set Scan function.
2. Press the
Scan
button again to continue
listening to the file. The scan will be terminated and the current file will continue to be
played.
2-24
minated and the previously played file will be
INFORMATION
Operating external devices
iPod®
the following before connecting your iPod or
iPhone device with the Hyundai iPod Cable.
I f the battery has been completed dis-
approximately 1-2 seconds. 			
Please turn the iPod device to pause/stop
minutes before connecting.
Connect the iPod device as shown in the pic-
●
Turn on the device before connecting.
ture.
●
If the device is set to lock, release the lock
The Hyundai iPod Power cable is needed in
order to operate iPod with the audio buttons
on the audio system. The USB cable provided
by Apple may cause malfunction and should
system, a high-pitched tone may occur for
charged, charge the device for at least 10
●
Connecting iPod devices
If a playing iPod is connected to the audio
●
prior to connecting it to the vehicle.
There are two types of iPod exclusive cables,
●
the detachable USB/AUX type and the All-
For iPhones, audio will not play if the audio
in-one type.
※U pon connecting or disconnecting the
system and BT are paired. Disconnect the
detachable iPod cable, you must connect or
before connecting.
●
not be used for Hyundai vehicles.
When there are no songs in the iPod or
pairing before connecting.
disconnect both the USB/AUX terminals.
※The iPod exclusive cable must be connect-
The Hyundai iPod Power cable maybe pur-
iPhone or if there is no response from the
ed to both the USB/AUX terminals for iPod
chased through your Hyundai dealership.
device after connecting with the Hyundai
charging and operations to be supported.
U nsupported iPod devices : iPod genera-
Cable, a “No Media Connected” pop-up mes-
tions before iPod 3G, iPod Shuffle, and iPad.
sage will be displayed for 5 seconds and the
●
CAUTION!
previous mode will automatically be restored.
In such cases, disconnect the iPod or iPhone
Some functions may not operate properly
and try connecting again.
depending on the firmware version in some
If the message continues even after recon-
iPod or iPhone devices.
necting the iPod, check to see if there are any
problems with the iPod device.
PRE-OVERVIEW 2-25
PRE-OVERVIEW
iPod® is a registered trademark of Apple Inc.
CAUTION!
In order to prevent such malfunction, check
PART 2 AUDIO SYSTEM
Voice Command
Listening to iPod music
1. Press the
1. Connect the iPod or press the MEDIA key
the playing file.
key on the steering wheel
the playing file.
remote controller.
on the control panel if the iPod is already
2. A
 fter the beep sound, say a command.
connected.
"iPod"
manually automatically according to the
iPod screen and functions
a  Menu
Even if the iPod is connected, message may
case, reconnect the iPod.
[Selecting an iPod song], page 2-27.
button : converts to the search
menu screen.
[Selecting an iPod song], page 2-27.
2. Select the desired song.
7 C
 urrent time : displays the current time
GPS time.
INFORMATION
be displayed if an error has occurred. In such a
6 A
 lbum name : displays the album name of
b  Repeat
buttons : repeats the current
playing song.
[Setting repeat function for iPod song],
page 2-28.
c  Random button : plays all songs in the
current playing list in random order or ran1 M
 ode display : displays that the current
mode is iPod mode.
2 R
 EPEAT/RANDOM indicator : if REPEAT/
RANDOM is operating, the switch is displayed.
3 T
 itle name : displays the title name of the
playing file.
4 P
 lay Time : displays the play time.
5 A
 rtist name : displays the artist name of
2-26
domly in album unit.
[Setting random function for iPod
song], page 2-28.
d  Sound
button : adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Sound setting], page 1-12.
Selecting an iPod song
"Previous Song"
There are 3 ways to select songs from the iPod
(b) Selecting song through search
(b) selecting song through sequential search,
1. P
 ress the ∨TUNE∧ key to search for desired
(c) selecting song through menu.
to display file. Operate the ∨TUNE∧ key
dial to display the previous or next channel
(a) Selecting song through Up / Down
information. After a brief moment, the select-
Press the
ed channel will be displayed.
key on the for less than 0.8
second. The next or previous song will begin
playing.
INFORMATION
I f the
key on the control panel or
INFORMATION
I f the operation of the ∨TUNE∧ key is too
method.
INFORMATION
rapid, there may be a delay in displaying the
If the search mode is accessed while playing a
song information.
song, the most recent searched step will be
displayed. The search steps upon initial con-
steering wheel remote controller is pressed
shortly while the track has played for more
(c) Selecting song through Menu
than 3 seconds, the start of the current song
1. Press the
will begin playing. If the track has been
2. Press the button for the desired search
Menu
nection are listed below.
button. The iPod menu
screen will be displayed.
playing for less than 2 seconds, the start of the
previous song will begin playing.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. A
 fter the beep sound, say a command.
"Next Song"
3. Press the desired song button to return to
the main screen and play the selected song.
PRE-OVERVIEW 2-27
PRE-OVERVIEW
device - (a) selecting song through Up/Down,
PART 2 AUDIO SYSTEM
1 Step
2 Step
3 Step
4 Step
Playlist
Song
Genre
Genre
Artist
Artist
Artist
Album
Song
Composer
composer
Album
Song
Album
Album
Album
Song
Song
Podcasts
Program
key on the con-
trol panel or steering wheel remote controller
for over 0.8 second. The song will be play fast-
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Repeat Song"
mal play when the button is released.
Say "Normal Play" in order to terminate the
Setting Repeat function for iPod song
button. Each press will
change the function in the following order :
Repeat → Repeat Off → Repeat ...
● Repeat : repeats the current playing song.
: plays all files in the current play
nated iPod Playlists) randomly regardless of
album.
e.g.) Music1→Music9→Music5→Music13 ...
Voice Command
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Random"
Setting Random function for iPod song
Press the
Random
button. Each press will
change the function in the following order :
Random → Album Random → Random Off →
Random ...
2-28
... → Music10) → Album5(Music → Music2)
→Album4(Music1→Music2→Music3) ...
1. Press the
set Repeat function.
Repeat
be played sequentially.
e.g.) A lbum1(Music1 → Music2 → Music3 →
list (All Songs, certain albums, or user desig-
er while holding the button and return to nor-
Press the
However, songs within the same album will
● R andom
Episode
Voice Command
REW/FF iPod song
Press and hold the
Song
Song
Songs
Random : plays the songs in the cur-
rent play list randomly in album units.
Playlist
Audiobooks
● Album
"Random Album"
Say "Normal Play" in order to terminate the
set Random.
USB MP3
USB MP3 related information and
precaution
• The MP3 file standards supported by the
device are as follows.
• Acceptable standard: MPEG1 AUDIO LAYER 3
• Acceptable sampling frequency: 32, 44.1, 48
(kHz)
• Acceptable bit rate : 32, 40, 48, 56, 64, 80,
96, 112, 128, 160, 192, 224, 256, 320 (kbps)
• R ecommended bit rate & reference sampling frequency: 96,128, 192 kbps fixed bit
rate /44.1kHz
• ID3 tag
This device supports ID3v1.0, ID3v1.1,
ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.
• Supported media
The MP3 media supported by the device are
CD-ROM and USB.
● Precaution
This device supports ISO9660 LEVEL1 and
Please use an MP3 bit rate which is less than
LEVEL2. Detailed specification is as below.
192Kbps and a fixed bit rate.
• Maximum directory layers: 20 layers
• Maximum length of folder name/file name:
250Bytes
• Supported characters for folder name/ file
name: Alphanumeric characters, Korean
The sound quality cannot be guaranteed for
MP3s exceeding 192Kbps and operation of
specific functions (limited to FF/REW functions) may be abnormal with variable bit
rates.
standard character set 2350 characters,
Simplified Chinese 4888 characters
• Maximum number of folders which can be
Precautions upon handling USB
● When
using the external USB device, make
stored onto one USB: 2000 folders (includ-
sure to keep the device disconnected.
ing ROOT directory)
Connect the device only after turning on
• M aximum number of files which can be
stored onto one USB: 6000 files
• Precautions upon formatting USB & downloading MP3 files
• The device only supports FAT type USB file
system. The device will not play USB media
content if the USB is NTFS type.
the vehicle ignition. The USB device may be
damaged if the USB device already connected when the ignition is turned on. (USB
device is not an electronic automotive component)
● The
external USB device may not operate if
the USB device already connected when
vehicle ignition is turned on or off.
● The
device will not operate when playing a
format which is not MP3 or WMA file formats.
PRE-OVERVIEW 2-29
PRE-OVERVIEW
● Information
• Supported media formats
PART 2 AUDIO SYSTEM
1. O nly MP3 files with compression rates
between 8Kbps~320Kbps are supported.
2. O nly WMA files with compression rates
between 8Kbps~320Kbps are supported.
● Be
cautious of static electricity when con-
necting/disconnecting the external USB
device.
the external USB device may differ depend-
Byte/Sector selection other than 512Byte or
ing on the type, size, or file formats stored
2048Byte.
on the USB. Such differences in the required
● The
device will only recognize USB devices
formatted in FAT 12/16/32.
● Some
USB devices may not operate proper-
ly because of compatibility issues. Verify
● Encoded MP3 Players will not be recognized
when connected as the external device.
● Charging
the device may not be properly recognize a
through the USB may not be sup-
ported in some mobile devices.		
※An iPod car cable (Provided or sold separately) is required to use the iPod.
that the external device is supported by the
device before starting use.
● Avoid
contact between the USB connector
with bodily parts and foreign substances.
● Repeatedly
connecting/disconnecting the
USB in a short period of time may cause
damage to the device.
• Detachable USB/AUX
• All-in-one USB/AUX
● When
disconnecting the USB, an abnormal
sound may occur occasionally.
● A bruptly
disconnecting the external USB
device while the USB is operating may
time are not indications of malfunction.
Please wait the period of time required to
recognize the device.
● The
device supports only USB devices used
to play music files.
● Do
not use the USB I/F to charge batteries
or USB accessories which generate heat.
Such acts may lead to deteriorated performance or damage to the device.
● T he
device may not recognize the USB
device if separately purchased USB hubs
and extension cables are being used.
Connect the USB directly to the multimedia
terminal of the vehicle.
● I n
the case of high capacity USB devices,
cause the device to be damaged or function
there are instances where the logical drives
abnormally.
are partitioned for user convenience. In this
Make sure to disconnect the USB device
case, only the USB music in the top-level
connecting an external USB device,
only after the audio power is turned off or
logical drive will be possible to play.
the device may not be properly recognize
when the audio is operating in a different
When using partitioned drives, save the
the USB when the USB is in some states.
mode.
songs desired to play on the device only in
● When
● When
2-30
formatting the external USB device,
● The
amount of time required to recognize
the top-level logical drive.
In addition, certain USB devices are configured with a separate drive used to install
phone accessories as they could cause damage to the USB jack.
Please make certain only to use plug type
drives may not be possible to play for the
connector products as shown below.
reasons as described above.
device may not support normal opera-
drives) are connected to the device.
The USB screen and operation method is the
same with MP3 mode. Please refer to the MP3
device may not support normal opera-
mode section for more information.
tion when using a USB memor y t ype
device may not support normal opera-
[Selecting the MP3
INFORMATION
devices not recognized as portable disk
besides the Metal Cover Type USB Memory.
2. Select the desired file.
file], page 2-19.
cameras, or other electronic devices (USB
● The
the control panel if the USB is already connected.
Plug Type Connector
tion if MP3 Players, cellular phones, digital
● The
1. Connect a USB or press the MEDIA key on
Connecting the USB
Connect the USB as shown in the picture.
tion when using formats such as HDD Type,
CF, or SD Memory.
● The
device will not support files locked by
DRM (Digital Rights Management).
● The device many not support normal opera-
tion if the proper connection with the USB
memory fails due to vibrations caused by
the vehicle. (i-stick type, etc.)
● Please
avoid using USB memory products
which can be used as key chains or cellular
PRE-OVERVIEW 2-31
PRE-OVERVIEW
application programs and songs from such
● The
Listening to USB music
PART 2 AUDIO SYSTEM
USB IMAGE Mode
USB IMAGE mode menu screen
configuration
d U
 SB music (MP3) Mode Music button :
converts to  mode.
Starting USB IMAGE Mode
1. The USB mode will automatically start when
mode, repeatedly press the MEDIA key to
List
button : displays the 
screen.
the USB is inserted. When in a different
convert to USB mode. (Each press will
change in order of AUX→DISC→USB)
 Timer button : allows changes to slide
show interval.
 Save button : upon turning off power,
saves the current image as the frame
screen image.
2. The image will be displayed on the screen.
INFORMATION
Press the
Music
button on the bottom left
1 M
 ode display : display that the current
mode is  mode.
2 F
 older name : displays the name of the
folder where photo files are located.
side to enter either mode. (Supported only
when compatible files exist within the USB)
3 F
 ile name : displays the file name of the
current photo.
4 F
 ile index : displays the number of Image
files within the USB (current file / all files)
5 S
 lide Show Interval : displays intervals of 5,
10, and 20 seconds.
 ◀ button : displays the previous photo.
S lide Show View : displays photos in intervals of 5, 10, and 20 seconds.
2-32
 ▶ button : displays the next photo.
 Hide button : hides the button display.
INFORMATION
 perating USB IMAGE Mode
For details on setting up the frame, refer to
the frame setup page within Screen setup.
1. Press the screen.
Restrictions while driving – Image Play related
PRE-OVERVIEW
(a) Moving to next IMAGE
buttons cannot be used while the vehicle is in
2. Within the Image screen, press the
▶
◀
or
button to flip through each file.
motion.
There are five buttons such as <
Play Icon
Save
Hide
▶
◀
(b) Displaying USB IMAGE Slideshow
Interval
1. R
 epeatedly press the
Timer
button at the
bottom to change the slideshow interval
(converts in time intervals of 5 seconds →
10 seconds → 20 seconds → 5 seconds).
(c) Registering Frame
1. P
 ress the
Save
button at the bottom of
the  screen. The currently displayed
image will be registered as the frame.
PRE-OVERVIEW 2-33
PART 2 AUDIO SYSTEM
AUX
Playing AUX
AUX screen
Connecting AUX
Connect an AUX or press the MEDIA key on
Connect the external Audio player as shown
the control panel if the AUX is already con-
in the picture.
nected.
External Device
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Line In"
INFORMATION
Connect only by using AUX terminals.
2-34
Audio AUX screen
MEMO
PRE-OVERVIEW
PRE-OVERVIEW 2-35
PART 3 NAVIGATION SYSTEM
PART 3
NAVIGATION SYSTEM
Limitations of the navigation
system… ……………………………… 3-2
Setting a destination … ……………… 3-12
Route guidance………………………… 3-30
Destination menu screen and
Route menu screen and functions……… 3-30
GPS signal reception state…………………3-2
functions………………………………… 3-12
Finishing route guidance
Vehicle position display……………………3-3
Searching a Destination………………… 3-13
(Delete Destination)… ………………… 3-30
Route Guidance… …………………………3-4
Searching an Address………………… 3-13
Route overview (View Entire Route)… … 3-31
Route Re-calculation… ……………………3-4
Searching a Previous Destination……… 3-17
Changing Route option………………… 3-32
Starting navigation system… ……………3-5
Searching an Intersection ……………… 3-17
Editing waypoints… …………………… 3-32
Searching a POI ………………………… 3-20
Deleting waypoints… ………………… 3-34
Map Functions ………………………… 3-5
Searching from Address book… ……… 3-24
Re-ordering waypoints… ……………… 3-34
Current position map screen
Searching for Emergency facilities… … 3-25
Setting detour distance………………… 3-35
(without route)… …………………………3-5
Searching your Home… ……………… 3-25
Setting avoid streets on route… ……… 3-35
Switching map mode
Searching favorite places… …………… 3-26
(North Up / Heading Up)… ………………3-6
Searching from MAP …………………… 3-26
Setup and Information … …………… 3-36
Viewing GPS signal state… ………………3-7
Searching POI by local POI list… ……… 3-26
Setup menu screen and functions……… 3-36
Changing the map scale… ………………3-8
Operating after searching a destination… 3-27
Main setting… ………………………… 3-37
Displaying / Hiding POI icons on the map…3-9
Changing destination position ………… 3-27
Displaying/Hiding Q.POI icons… ……… 3-9
Displaying / Hiding icons other than
Setting as Destination / waypoint……… 3-27
Setting keyboard for inputting letter … 3-37
S etting voice command feedback
Adding to address book … …………… 3-27
ON/OFF… ……………………………… 3-37
Making a call to POI… ………………… 3-10
Operating after setting a destination…… 3-28
Setting Language… …………………… 3-37
Initializing system… …………………… 3-37
Scrolling map…………………………… 3-11
Route guidance screen… ……………… 3-28
Navigation setting… …………………… 3-38
Selecting other route…………………… 3-29
Setting units (mile/ km)………………… 3-38
Q.POI icons……………………………… 3-9

PART 3
NAVIGATION SYSTEM
Traffic Setup… ………………………… 3-52
display…………………………………… 3-38
Traffic Information… …………………… 3-52
Registering avoid area… ……………… 3-38
E diting avoid area… …………………… 3-40
Help……………………………………… 3-54
NAVIGATION SYSTEM
Setting arrival time and distance
Deleting avoid area… ………………… 3-41
Deleting all avoid areas………………… 3-41
Setting Q.POI icons……………………… 3-42
Setting estimate travel time… ………… 3-42
My places setting… …………………… 3-43
Registering new address in
address book���������� 3-43
Editing an address of address book… … 3-45
Deleting an address of address book…
3-46
Deleting an address book… …………… 3-47
Registering home address……………… 3-48
Deleting home address………………… 3-48
Registering favorite place… …………… 3-49
Deleting favorite place… ……………… 3-50
System information and update… …… 3-51
Voice guidance volume setting………… 3-51
Voice guidance volume control………… 3-51
Adaptive volume control ON/OFF……… 3-52
NAVIGATION SYSTEM
3-1
PART 3 NAVIGATION SYSTEM
Limitations of the navigation
system
GPS signal reception state
● As
the GPS satellite frequency is received /
• Underneath an overpass
transmitted in straight lines, reception may
not work if devices are placed on or near
the GPS antenna or when traveling through
the following locations.
• Roads within forested areas
• Tunnels
• Areas near high rise buildings
• Basement parking structures
3-2
NAVIGATION SYSTEM
• Roads within canyons
Vehicle position display
● If
multipass errors occur due to reflections
• When driving on a spiral-shaped road.
• W hen driving in mountain regions with
sharp turns or sudden brakes.
• W hen using a tire with an incorrect size
specification.
• When the tire pressure for the 4 tires are dif-
from buildings or related causes, the current
• When entering a road after having been in
position mark on the navigation may differ
an underground parking structure, building
• W hen the replacement tire is a worn or
from the actual position of the vehicle.
parking structure, or turntable with many
used tire (Especially studless tires having
position of the vehicle on the naviga-
• When the tires have recently been replaced
tion may be different from the actual posi-
(Especially upon use of spare or studless
● The
tion if the vehicle is under the following
tires)
for a short period of time will automatically
• If the battery terminal is removed.
• W hen driving in city streets, the current
correct the position of the vehicle through
position may be displayed on the opposite
conditions. If such differences occur, driving
map matching or GPS information (several
minutes may be necessary in certain cases).
passed a 2nd seasons, etc.)
• When driving near high-rise buildings
• If a roof carrier has been installed
• When driving under high speeds or having
calculated a long-distance route.
side or on an off-road position.
• W hen changing the zoom level from the
maximum zoom in level to a different zoom
•W
 hen driving on a Y-shaped road with a
narrow angle, the current position may be
displayed in the opposite direction.
• If the vehicle is loaded onto a ferry or a car
transport vehicle, the current position mark
may be stalled on the last position prior to
loading.
level, the current position mark may be displayed on a different road.
• When driving in heavy traffic with frequent
go·stops in traffic or intersections.
• W hen driving under slippery conditions,
such as heavy sand, snow, etc.
• When driving with the tire chain in place.
NAVIGATION SYSTEM
3-3
NAVIGATION SYSTEM
rotations.
ferent.
PART 3 NAVIGATION SYSTEM
Route Guidance
Route Re-calculation
route guidance may not occur
• Faulty voice guidance may be given if the
caused by search conditions or the driving
vehicle breaks from the designated route
position.
(ex: if a turn is made at an intersection while
•G
 uidance may be given to a position differ-
the navigation provided guidance to go
ing from the current position when turning
● S uitable
• Guidance to go straight may be given while
driving on a straight road.
• Guidance may not be given even when having turned at an intersection.
• T here are certain intersections in which
guidance may not occur.
• A route guidance signaling for a U-Turn in a
No U-Turn location may occur.
• A route guidance signaling entrance into a
no enter zone may occur (No enter zone,
road under construction, etc.).
• G uidance may be given to a position
removed from the actual destination if
roads to reach the actual destination do not
exist or are too narrow.
straight).
• Map Data may be missing or incorrect causing route guidance to not be given.
● The
following phenomena may occur after
conducting route recalculation.
at an intersection.
•R
 oute Recalculation may take a longer period of time when driving under high speeds.
•A
 route guidance signaling for a U-Turn in a
No U-Turn location may occur.
•A
 route guidance signaling entrance into a no
enter zone may occur (No enter zone, road
under construction, etc).
•G
 uidance may be given to a position
removed from the actual destination if
roads to reach the actual destination do not
exist or are too narrow.
• F aulty voice guidance may be given if the
vehicle breaks from the designated route
(ex: if a turn is made at an intersection while
the navigation provided guidance to go
straight)
3-4
NAVIGATION SYSTEM
Starting navigation system
Map Functions
Current position map screen
(without route)
Press the
MAP
VOICE
state of GPS signal reception.
[Viewing GPS signal state], page 3-7.
[Changing the map scale], page 3-8.
Landmark icons : landmark icons are displayed on the map when the map scale
level is set to under 300 ft (100m depending on map data)
DEST , ROUTE , SETUP ). The Caution screen
[Appendix : landmark icons], page 10-7.
will always be displayed when first entering
POI icons : POI icons are displayed on the
into Navigation mode. Read the contents of
map when the map scale level is set to
the caution screen carefully and press the
under 0.5 mi (800m).
Agree
button.
[Appendix : POI icons], page 10-5.
Current vehicle position icon : displays the
current position of the vehicle.
NAVIGATION SYSTEM
3-5
NAVIGATION SYSTEM
neighboring area.
MAP
VOICE
Map scale level indicator : displays the current map scale.
key on the control panel to
display the map of current position and the
Press the Navigation mode key (
G PS signal state indicator : displays the
PART 3 NAVIGATION SYSTEM
North Up / Heading Up switch : displays
the current map mode and the map mode
Switching map mode (North Up /
Heading Up)
The vehicle icon is displayed in the center
position of the map.
can be switched between North Up and
Heading Up.
[Switching map mode], page 3-6.
POI : displays or hides the POI icon on the
Each time the compass button is pressed, the
screen will switch in the order shown below.
Heading Up → North Up → Heading Up ...
map.
[Displaying/Hiding POI icons on the
INFORMATION
map], page 3-9.
All map screens (map screen after setting des-
Map scale : increases or decreases the map
tination & whole route display screen) except
scale.
the current position screen will always be dis-
[Changing the map scale], page 3-8.
played in North Up mode.
●H
 eading
Up : displays the map always fac-
ing the direction which the vehicle is traveling. The vehicle icon is displayed in the
lower center position of the map.
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"North Up"
● North
Up : displays the map always facing
the North direction regardless of the direction which the vehicle is traveling.
3-6
NAVIGATION SYSTEM
"Heading Up"
Viewing GPS signal state
● GPS
information may not operate under
The state of GPS signal reception is displayed
thefollowing conditions.
as shown below.
• When buildings, tunnels, or other obstructions block satellite signals.
(active) :
●
GPS reception is satisfactory.
GPS reception is unsatisfactory.
[System information and update], page
3-51.
antenna and block satellite signals.
• When the satellite does not transmit sig-
NAVIGATION SYSTEM
(inactive) :
●
• When materials are placed above the GPS
nals (signal transmission is controlled by
the satellite control center in the United
States and may not transmit when under
repair, modification, etc).
INFORMATION
● GPS
(Global Position System) : GPS is a sys-
tem developed and operated by the United
• When a digital cellular phone (1.5GHz) is
placed near the GPS antenna.
● This
system uses GPS information, various
States which determines the current loca-
sensors, road map data, and other related
tion of the user (longitude, latitude, etc.) by
information to display the current position.
generally using 4 or more satellites. This
Errors may occur if the satellite is transmit-
system is used with related GPS informa-
ting inaccurate signals or only two or less
tion, various sensors, road map data, and
satellite signals can be received.
other navigation related information.
Errors which occur in such conditions cannot be corrected.
NAVIGATION SYSTEM
3-7
PART 3 NAVIGATION SYSTEM
Changing the map scale
Press the
or
button. The map scale
will be increased or decreased by one level.
INFORMATION
or
button is pressed,

Each time the
the scale bar will be displayed.
The scale can be changed by directly pressing
the scale level on the scale bar.
The green color on the scale bar indicates the
current scale level while the orange color indicates the selected scale level.
● Press the
or
button for over 0.8
second. The scale will continuously change.
button will be disabled.
● The map scale range is between 1 and 14:
10,240,000 ~ 1 : 5,000.
3-8
NAVIGATION SYSTEM
or

● If the scale range limit is reached, the
Level
10
11
12
13
14
Actual distance
mi / ft
150 ft
300 ft
700 ft
0.25 mi
0.5 mi
1 mi
2 mi
4 mi
8 mi
16 mi
32 mi
64 mi
130 mi
250 mi
km / m
50 m
100 m
200 m
400 m
800 m
1.6 km
3.2 km
6.4 km
12 km
25 km
50 km
100 km
200 km
400 km
Voice Command
1. Press the
key on the steering wheel
Displaying / Hiding POI icons on
the map
"Zoom In"
Displaying/Hiding Q.POI icons
 ress the
1. P
POI ▼
button. 			
Related menu buttons will be displayed at
"Zoom Maximum"
the bottom of the screen.
" (ex. Zoom 700ft)"
there are no POI icons being displayed,
the ALL OFF button will be disabled.
● POI
"Zoom Minimum"
"Zoom "
are shown as normal buttons.
● If
icons are displayed when the scale is
under 0.5 mi (800m).
INFORMATION
The Q.POI icons are set to
- Parking,
- Bank,
- Hotel,
- Gas Station,
- Golf Course,
- Fast Food (6 icons) by default.
This setting can be changed in SETUP.
[Setting Q.POI icons], page 3-42.
Displaying / Hiding icons other than
Q.POI icons
1. Press the POI ▼ button.
Related menu buttons will be displayed at
the bottom of the screen.
2. Press the Others
button.
INFORMATION
Q.POI stands for Quick POI and refers to the
function which turns POI icon display on or off
on the map.
 ress the icon buttons to display or hide.
2. P
To turn off all POI icons displayed on the
map, press the ALL OFF button.
NAVIGATION SYSTEM
3-9
NAVIGATION SYSTEM
"Zoom Out"
"Zoom level <1 to 14>"
current displayed POI icons are high-
lighted while the icons not being displayed
remote controller.
2. After the beep sound, say a command.
INFORMATION
● The
PART 3 NAVIGATION SYSTEM
(a) by category list
5. I f the Show Icon(s) button is pressed, the
Making a call to POI
selected menus will be displayed or hidden
on the map screen.
Voice Command
1. Press the
information can be used to make a call to the
POI facility.
key on the steering wheel
remote controller.
3. Press the desired main category button.
After searching a POI, the POI phone number
 se the various search methods, such as the
1. U
2. After the beep sound, say a command.
map scroll function, Q.POI search function,
"Show " (ex. Show ATM)
and destination search function to search
"Hide " (ex. Hide ATM)
for a POI.
"Hide All"
4. S elect the desired sub category menu to
display or hide (Multiple selections are possible).
Press the selected menu again to cancel the
selection.
3-10 NAVIGATION SYSTEM
2. Press the
button.
INFORMATION
● M aking
Press the map area on the map screen.
no mobile phone connected through
The selected point will be centered on the
Bluetooth.
screen and the scroll mark will be displayed.
more information of mobile phone
Information about the marked point and
authentication through Bluetooth or
straight line distance from the current posi-
detailed information on conducting search,
tion will be displayed at the top of the screen.
refer to
[ Pa i r i n g a n d c o n n e c t i n g
a Bluetooth phone], page 5-4.
 nce the call is ended, the map is restored
4. O
to the current vehicle location.
INFORMATION
I f a map area on the map screen is pressed,
the map will continuously scroll in the corresponding direction until the pressing is
released.
NAVIGATION SYSTEM 3-11
NAVIGATION SYSTEM
facility.
a call is not possible if there is no
telephone information for a POI or if there is
● F or
 luetooth is used to make a call to the POI
3. B
Scrolling map
PART 3 NAVIGATION SYSTEM
Setting a destination
Destination menu screen and
functions
emergency facilities search.
page 3-25 .
[Searching for Emergency facilities],
A ddress : sets the destination through
[Searching an Address], page 3-13.
P revious Dest : sets the destination
through the previous destination list.
[Searching a Previous Destination],
Press the DEST key on the control panel to
page 3-17 .
Intersection : sets the destination through
intersection search.
[Searching an Intersection], page 3-17.
POI Search : sets the destination through
POI Category search.
[Searching a POI], page 3-20 .
A ddress Book : sets the destination
through address book search.
[Searching from Address book], page
3-24 .
3-12 NAVIGATION SYSTEM
address search.
display the destination menu screen.
Emergency : sets the destination through
HOME : sets the stored HOME as the destination.
[Searching your Home], page 3-25 .
Favorite place 1 ~ 5 : sets the destination with one of the stored favorite places.
[Searching favorite places], page 3-26 .
Searching a Destination
5. S elect the desired state from the list to
change the state.
Searching an Address
(a) by street
There are 2 ways to set the destination
through address search-(a) by street, (b) by
city.
4. Input the State name and press the
List
button.
2. Press the Address button.
If the number of matches with the input is
less than 4 results, then the state list screen
will be displayed automatically.
If the number of matches is only one result,
6. Press the Street button.
then the state will automatically be
changed without having to manually select
the state.
3. P ress the
State
button to change the
state.
NAVIGATION SYSTEM 3-13
NAVIGATION SYSTEM
1. Press the DEST key.
PART 3 NAVIGATION SYSTEM
7. I nput the House number and Press the
Done
button to complete.
If the House number is not recognized, press
the
Skip
button.
In this case, the range of house numbers
will be displayed during the last step.
9. I f the desired street from the list is selected,
10. Input the city name and press the
List
the corresponding position will be dis-
button to complete. If the number of
played on the map.
matches with the input is less than 4
results, then the list screen will be dis-
INFORMATION
played automatically.
If more than 30 cities exist with the selected
street, then the city input screen will be dis8. I nput the Street name and press the
List
button.
played. If less than 30 cities exist, then the city
selection screen will be displayed.
If the number of matches with the input is
less than 4 results, then the street list screen
will be displayed automatically.
11.Select the desired city from the list.
3-14 NAVIGATION SYSTEM
Input the House number and press the
Done
button to complete.
6. I nput the city name and press and press the
List
button.
The corresponding position will be dis-
If the number of matches with the input is
played on the map.
less than 4 results, then the city list screen
will be displayed automatically.
NAVIGATION SYSTEM
(b) by city
12. T his screen will be displayed if the House
number had not been inputted during
step 6 and more than 2 house numbers
ranges exist.
Select the desired House number range.
7. Select the desired city from the list.
5. Press the
City
button.
13. T his screen will be displayed if the House
number had not been inputted and only
one house numbers range exists.
NAVIGATION SYSTEM 3-15
PART 3 NAVIGATION SYSTEM
8. I nput the house number and press the
Done
button to complete.
If the House number is not recognized,
press the
Skip
button.
In this case, the range of house numbers
will be displayed during the last step.
10. S elect the desired street from the list and
12. This screen will be displayed if the House
the corresponding position will be dis-
number had not been inputted during
played on the map.
step H and only one House number
range exists.
Select the house number range and Press
the Done button to complete.
The corresponding position will be dis-
9. I nput the Street name and press the
List
played on the map.
button to complete.
Voice Command
If the number of matches with the input is
less than 4 results, then the street list screen
will be displayed automatically.
1. P
 ress the
11. T his screen will be displayed if the House
number had not been inputted during
step 8 and more than 2 House number
ranges exist.
Select the desired House number range.
3-16 NAVIGATION SYSTEM
key on the steering wheel
remote controller.
2. A
 fter the beep sound, say a command.
"Find address"
[Find address], page 5-19.
Searching a Previous Destination
1. Press the DEST key.
2. Press the
Previous Dest
Searching an Intersection
4. I nput the state name and press the
List
There are two ways to set the destination
button. If the number of matches with the
through intersection search-(a) by street, (b)
input is less than 4 results, then the state
by city.
list screen will be displayed automatically.
If the number of matches is only one result,
button.
1. Press the DEST key.
then the state will automatically be
the state.
3. S elect the desired previous destination. The
corresponding position will be displayed on
the map.
Voice Command
1. Press the
3. P ress the
state.
State
button to change the
5. S elect the desired state from the list to
change the state.
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Previous destination"
[Previous destination], page 5-24.
"Previous start point"
[Previous start point], page 5-25.
NAVIGATION SYSTEM 3-17
NAVIGATION SYSTEM
changed without having to manually select
2. Press the Intersection button.
PART 3 NAVIGATION SYSTEM
(a) by street
8. Select the desired 1st street from the list.
10. Select the desired 2nd street menu from
the list. The corresponding position will be
6. Press the Street button.
displayed on the map.
9. Input the name of the 2nd street and press
the
7. Input the name of the 1st street and press
the
List
button.
If the number of matches with the input is
List
button.
If the number of matches with the input is
11. I f the selected 2nd street is within more
less than 4 results, then the street list screen
than 2 cities, then the city list screen will
will be displayed automatically.
be displayed.
less than 4 results, then the street list screen
Select the desired city menu from the list.
will be displayed automatically.
The corresponding position will be displayed on the map.
3-18 NAVIGATION SYSTEM
(b) by city
10. S elect the desired 1st street menu from
the list.
6. Press the
City
button.
9. I nput the name of the 1st street and press
the
7. Input the city name and press the
List
List
button.
11. Input the name of the 2nd street and press
List
If the number of matches with the input is
the
button.
less than 4 results, then the street list screen
If the number of matches with the input is
If the number of matches with the input is
will be displayed automatically.
less than 4 results, then the street list
less than 4 results, then the city list screen
button.
screen will be displayed automatically.
will be displayed automatically.
NAVIGATION SYSTEM 3-19
NAVIGATION SYSTEM
8. Select the desired city name.
PART 3 NAVIGATION SYSTEM
Searching a POI
There are 3 ways to set the destination
through POI search - (a) by category, (b) by
name, (c) by phone number.
1. Press the DEST key.
12. Select the desired 2nd street menu from
the list.
4. I nput the state name and press the
2. Press the
POI Search
button.
List
button. If the number of matches with the
The corresponding position will be dis-
input is less than 4 results, then the state list
played on the map.
screen will be displayed automatically.
If there is only one matching result, then
the state will automatically be changed
without having to manually select the state.
3. Press the State button.
13. I f the selected 2nd street is within more
than 2 cities, then the city list screen will
be displayed. Select the desired city menu
from the list. The corresponding position
will be displayed on the map.
5. S elect the desired state from the list to
change the state.
3-20 NAVIGATION SYSTEM
(a) By category
(a-1) Near current position
Searches for facilities nearby the current posi-
Searches for facilities within a 50 mi (80Km)
tion or from the city center.
radius of the current position.
6. Press the Category button.
8. Press the desired main category menu.
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
2. A
 fter the beep sound, say a command.
"Find nearest POI"
10. Select the desired menu button.
The corresponding position will be displayed on the map.
[Find nearest POI], page 5-20.
7. P ress the Near current position button to
search for facilities nearby the current position, or press the Near city center
button
to search for facilities in the near city center.
NAVIGATION SYSTEM 3-21
NAVIGATION SYSTEM
9. Press the desired sub category menu.
PART 3 NAVIGATION SYSTEM
(a-2) Near city center
Searches for facilities from the city center.
10. Press the desired main category.
12. Select the desired menu button.
The corresponding position will be displayed on the map.
8. Input the city name and press the
List
INFORMATION
button.
If the number of matches with the input is
The distance on each POI item button refers
less than 4 results, then the city list screen
to the distance from the city center.
will be displayed automatically.
11. Press the desired sub category.
9. Press the desired city menu.
3-22 NAVIGATION SYSTEM
(b) By name
● Changing City
1. Press the
City
button.
2. Input the city name and press the
List
button.
3. Select the desired city name.
6. Press the Name button.
● Changing Category
1. Press the Category button.
The corresponding position will be dis-
2. Select the desired main category menu.
played on the map.
3. Select the desired sub category menu.
INFORMATION
(c) By phone number
When necessary, the search conditions for the
city and category can be changed by pressing
the Advanced button.
7. I nput the name of the POI and press the
List
button.
If the number of matches with the input is
6. Press the
Phone #
button.
less than 4 results, then the facilities list
screen will be displayed automatically.
NAVIGATION SYSTEM 3-23
NAVIGATION SYSTEM
8. Select the desired POI menu.
PART 3 NAVIGATION SYSTEM
Searching from Address book
1. Press the DEST key.
2. Press the Address book button.
7. I nput the phone number and Press the
Done
4. Select the desired address name from the
list.
button to complete.
The corresponding position will be dis-
The corresponding position will be
played on the map.
displayed on the map.
[Registering new address in address
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
book], page 3-43.
3. S elect the desired address book (user)
menu.
2. A
 fter the beep sound, say a command.
"Destination POI by Phone Number"
[Destination POI by phone number],
page 5-22.
Voice Command
1. Press the
INFORMATION
This system provides 5 address books. Each
addresses book can hold up to 200 entries.
key on the steering wheel
remote controller.
2.After the beep sound, say a command.
"Destination by address book"
[Destination by address book], page
5-24.
3-24 NAVIGATION SYSTEM
Searching for Emergency facilities
Voice Command
1. P
 ress the
1. Press the DEST key.
Searching your Home
key on the steering wheel
remote controller.
1. Press the DEST key.
2. After the beep sound, say a command.
2. Press the
Emergency
button.
"Find emergency "
[Find emergency ], page
The Home position will be displayed on
the map.
INFORMATION
If the Home address is not registered, then the
HOME
button will not be displayed.
[Registering home address], page 3-48.
3. Select the desired facility category.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Go home"
 [Go home], page 5-25.
4. Select the desired facility.
The corresponding position will be displayed on the map.
NAVIGATION SYSTEM 3-25
NAVIGATION SYSTEM
5-23.
2. Press the HOME button.
PART 3 NAVIGATION SYSTEM
Searching favorite places
Searching from MAP
Position the scroll mark at the destination by
1. Press the DEST key.
scrolling the map on the map screen.
2. Select the desired button from 1 ~ 5 .
Searching POI by local POI list
The corresponding position will be displayed on the map.
1. P ress the POI ▼
button on the map
screen.
INFORMATION
If the address of the Favorite place is not regis-
The corresponding position will be dis2. Press the Others button.
tered, then the 1 ~ 5 buttons without
[Registering favorite place], page 3-49.
1. Press the
2. After the beep sound, say a command.
"Find nearest "
key on the steering wheel
remote controller.
[Find nearest ], page 5-21.
2. After the beep sound, say a command.
page 5-25.
3-26 NAVIGATION SYSTEM
key on the steering wheel
remote controller.
Voice Command
"Destination by memory point <1 to 5>"
[Destination by memory point <1 to 5>],
played on the map.
Voice Command
registered addresses will be disabled.
1. P
 ress the
4. Select the desired POI menu.
3. Press the Local POI lists button.
Operating after searching a
destination
Voice Command
1. P
 ress the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Start guidance"
(Sets the position of the scroll mark as the
Saves the position in the address book.
[Registering new address in address book],
page 3-43.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Store Marked Location to "
Changing destination position :
Changes the position of the destination by
scrolling the map.
[Scrolling map], page 3-11.
Setting as Destination / waypoint :
Sets the position as the destination or waypoint.
NAVIGATION SYSTEM 3-27
NAVIGATION SYSTEM
destination and begins route guidance.)
Adding to address book :
PART 3 NAVIGATION SYSTEM
Operating after setting a
destination
Voice Command
1. Press

the
Route guidance screen
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Time to destination"
"Distance to destination"
● Symbol
guidance mode : if the
button
is pressed, then the following route guid-
Starting Route Guidance
ance screen will be displayed.
Press the Start Guidance button. Route Guidance will start.
● Route simulation
• If the
Start Guidance
button is pressed and
held for over 0.8 second, then the route
simulation will start.
• I f the
MAP
VOICE
key on the control panel is
●
T urn-List mode : if the
button is
pressed during route simulation, then route
pressed, then the following route guidance
simulation will be terminated.
screen will be displayed.
3-28 NAVIGATION SYSTEM
Selecting other route
mode : if the
button is
● H ighway
junction mode : this route guid-
pressed, then the following route guidance
ance screen is automatically displayed dur-
screen will be displayed.
ing guidance at highway junctions.
1. Press the Altrenative Route button.
Once guidance at a highway junction is
complete, this screen will automatically disappear and the previous guidance screen
will be restored.
● Intersection zoom mode : this route guidance
screen is automatically displayed during
2. O ther routes can be selected by pressing
the ◀ or ▶ buttons.
guidance at an intersection.
Once guidance at the intersection is complete, the screen will automatically disappear
and the previous guidance screen will be
restored.
NAVIGATION SYSTEM 3-29
NAVIGATION SYSTEM
● H ighway
PART 3 NAVIGATION SYSTEM
Route guidance
Cancel Route: deletes destination, waypoints and terminates route guidance.
Route menu screen and functions
 inishing route guidance (Delete
Destination)
[Finishing route guidance], page 3-30 .
Route Overview: displays the entire route
1. Press the ROUTE key.
and route detailed.
[Route overview], page 3-31 .
2. Press the
Cancel Route
button.
R oute Option: the route option can be
changed.
[Changing Route option], page 3-32 .
Edit Waypoint: waypoints can be added/
deleted and the order can be changed.
[Editing waypoints], page 3-32 .
Press the ROUTE key on the control panel.
e
The ROUTE menu screen will be displayed.
Detour : searches detour routes.
[Setting detour distance], page 3-35 .
Avoid Streets: searches routes which avoid
the selected streets.
[Setting avoid streets on route], page
3-30 NAVIGATION SYSTEM
3-35.
3. Press the Yes button.
The destination and waypoints are deleted
and the route guidance is terminated.
[Finishing route guidance], page 3-30 .
Voice Command
1. Press the
Route overview (View Entire Route)
key on the steering wheel
remote controller.
1. Press the ROUTE key.
2. After the beep sound, say a command.
"Cancel route"
2. Press the Route Overview button.
(Terminates route guidance and deletes the
4. T he detailed route information can be
viewed
3. Press the Turn by Turn button.
INFORMATION
If the Return to guidance button is pressed,
route guidance screen is displayed.
NAVIGATION SYSTEM 3-31
NAVIGATION SYSTEM
set destination and waypoints.)
PART 3 NAVIGATION SYSTEM
Changing Route option
Voice Command
1. Press the
1. Press the ROUTE key.
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
2. Press the
Route Option
button.
Editing waypoints
Adding waypoints
There are 2 ways to add waypoints - (a)
"Replan recommended route"
searching for POI nearest to the route, (b)
"Replan shortest route"
using advanced search.
1. Press the ROUTE key.
2. Press the Edit Waypoint button.
3. Press the button for the desired route guidance method.
Guidance will be restarted after recalculating the route with the selected guidance
method.
3. Press the Press to add new waypoint button.
3-32 NAVIGATION SYSTEM
(a) Searching POI lists near route
8. Press the Add as Waypoint button.
7. Select the desired POI from the list.
 ress the Done button to complete.
9. P
4. Press the Near POI Lists on Route button.
5. Select the desired category.
The corresponding position will be dis-
Guidance will restart after recalculating the
played on the map.
route.
NAVIGATION SYSTEM 3-33
NAVIGATION SYSTEM
6. Select the desired sub category from list.
PART 3 NAVIGATION SYSTEM
Re-ordering waypoints
(b) Using advanced Search
The method for searching waypoints through
1. Press the ROUTE key.
the Advanced(more) button is the same
method as searching destination.
2. Press the Edit waypoint button.
[Searching a Destination], page 3-13.
Deleting waypoints
4. Press the Yes button.
1. Press the ROUTE key.
2. Press the Edit waypoint button.
3. S elect the desired waypoint and use the
Move ▲
, Move ▼ buttons to change the
order.
5. After deleting, press the Done button to
complete.
Guidance will be restart after recalculating
the route.
3. Select the waypoint and press the Delete
button.
3-34 NAVIGATION SYSTEM
4. O nce re-ordering is complete, press the
Done
button to complete.
Guidance will restart after recalculating the
route.
Setting detour distance
Setting avoid streets on route
1. Press the ROUTE key.
1. Press the ROUTE key.
2. Press the Detour
2. Press the Avoid streets button.
button.
NAVIGATION SYSTEM
3. Select the desired detour range.
Guidance will restart after recalculating the
detour route.
allow) and press the Done
button to
complete.
Voice Command
1. Press the
3. Select the desired streets to avoid( avoid,
Guidance will restarted after recalculating
the route to avoid the selected streets.
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Detour <1 or 2 or 5 or 10> miles"
"Detour <1 or 2 or 5 or 10> kilometers"
NAVIGATION SYSTEM 3-35
PART 3 NAVIGATION SYSTEM
Setup and Information
Setup menu screen and functions
Help button : the help contents can be
viewed.				
[Help], page 3-54 .
Traffic Setup : sets to display traffic information on map, or to provide upcoming traffic
information voice guidance, and or to dis-
play the detour route popup showing
upcoming traffic information.
M ain button : changes to the input keyboard type, voice command feedback ON/
OFF settings and system initialization can
be made. 				
[Main setting], page 3-36 .
Press the SETUP key on the control panel to
display the setup menu screen.
Voice Setup button : adjusts the Navigation
guidance volume. 			
[Voice guidance volume setting], page
3-51.
Navigation button : navigation related settings can be set. 				
[Navigation setting], page 3-38 .
Clock Setup button
My Places button : the Address book, Home
address, Favorite places, Previous destination can be edited.			
[My places setting], page 3-43 .
3-36 NAVIGATION SYSTEM
Main setting
Setting voice command feedback ON/
OFF
Initializing system
1. Press the SETUP key.
Press the desired setting button.
1. Press the Factory Default button.
2. Press the Main button.
Setting Language
button.
2. Press the menu desired for initialization.
3. S elect the desired changes and press the
Done
button to complete.
2. Press the desired language.
Setting keyboard for inputting letter
Press the desired keyboard type button. The
selection will be highlighted.
3. Press the Yes butto
3. Press the Done button to complete.
NAVIGATION SYSTEM 3-37
NAVIGATION SYSTEM
1. Press the Change
PART 3 NAVIGATION SYSTEM
Navigation setting
1. Press the SETUP key.
Registering avoid area
1. Press the Avoid Area button.
2. Press the Navigation button.
4. S et the end position of the avoid area and
press the Next button.
2. Press the Add new avoid area button.
3. S elect the desired changes and press the
Done
button to complete.
Setting units (mile/ km)
5. Press the Done button to complete.
Select the desired distance unit.
3. Set the start position of the avoid area and
Setting arrival time and distance display
Select the desired setting button.
3-38 NAVIGATION SYSTEM
press the Next button.
press the
Rename
button.
NAVIGATION SYSTEM
6. I f the Avoid area needs to be renamed,
8. Each time the Avoid button is pressed, the
function will switch between avoid ( )or
allow( ).
9. Press the Done button to complete the setting.
7. Rename the Avoid area and Press the Done
button to complete.
NAVIGATION SYSTEM 3-39
PART 3 NAVIGATION SYSTEM
Editing avoid area
1. Press the Avoid area button.
4. I f the Avoid area needs to be renamed,
press the
Rename
button.
6. Each time the Avoid button is pressed, the
function will switch between avoid( )or
allow( ).
2. Press the Edit avoid area button.
7. P ress the Done button once editing is
complete.
5. R ename the Avoid area and press the
Done
3. Select the Avoid area button to edit.
3-40 NAVIGATION SYSTEM
button to complete.
Deleting avoid area
Deleting all avoid areas
1. Press the Avoid area button.
1. Press the Avoid area button.
2. Press the Edit avoid area button.
2 . Press the Delete all avoid area button.
5. Press the Yes button.
3. Select the Avoid area button to delete.
3. Press the Yes button.
NAVIGATION SYSTEM 3-41
NAVIGATION SYSTEM
4. Press the Delete button.
PART 3 NAVIGATION SYSTEM
Setting Q.POI icons
Setting estimate travel time
1. Press the Edit Q.POI button.
1. Press the Travel Time button.
4. Select the desired sub category.
2. Select the desired menu.
2. P r e s s t h e ◀
or ▶
button on the
Residential, Main street, and Freeway controls to adjust the speed.
Pre s s t h e
Default
b u t to n to s e t t h e
speeds to the default settings.
5. Press the Done button to complete.
3. Press the Done button to complete the set-
INFORMATION
Q.POI stands for Quick POI and refers to the
3. Select the desired category.
function which turns POI icon display on or off
on the map.
3-42 NAVIGATION SYSTEM
ting.
My places setting
3. Press the Add to Address Book button.
Registering new address in address book
(b) by registering in the address book
1. Press the SETUP key.
There are 3 ways to register a new address in
2. Press the My Places button.
the address book - (a) by DEST menu, (b) by
registering address in address book, (c) from
NAVIGATION SYSTEM
map scroll.
(a) by DEST menu
 ress the desired address book (user) but4. P
1. Press the DEST key.
ton.
2. Search through the desired method.
The search process is the same as the meth-
3. Press the
Address Book
button.
od for destination search.
[Searching a destination], page 3-13.
5. Input the name and telephone information
and press the Done button to complete.
[Editing an address of address book],
page 3-45.
4. Press the desired address book (user) button.
NAVIGATION SYSTEM 3-43
PART 3 NAVIGATION SYSTEM
7. Input the name and telephone information
and press the Done button to complete.
[Editing an address of address book],
page 3-45.
(c) from map scroll
5. Press the New Address button.
1. I n the map screen, scroll the map to the
desired position.
3. Press the desired address book (user) button.
4. Input the name and telephone information
and press the Done button to complete.
[Editing an address of address book],
page 3-45.
 ress the Address button to search the
6. P
address.
[Searching an address], page 3-13.
INFORMATION
Press the Store current position button to input
the address of the current position.
3-44 NAVIGATION SYSTEM
2. Press the Add to Address Book button.
Editing an address of address book
1. Press the SETUP key.
2. Press the My Places button.
7. I nput the address name and press the
Done
3. Press the
Address Book
button to complete.
button.
6. P ress the
Name
address name.
button to input the
8. Press the Address button to search the
address. The process is the same as the
method for searching an address.
[Searching an Address] , page 3-13.
INFORMATION
4. S elect the desired address book (user) button .
Press the Store current position button to input
the address of the current position.
NAVIGATION SYSTEM 3-45
NAVIGATION SYSTEM
5. Select the desired address to edit.
PART 3 NAVIGATION SYSTEM
9. P ress the Phone button to input the
Deleting an address of address book
phone number.
1. Press the SETUP key.
2. Press the My Places button.
5. S elect the desired address button to
delete.
10. I nput the phone number and press the
Done
button to complete.
3. Press the
Address Book
button.
6. Press the Delete
11. Press the Done button to complete.
4. Select the desired address book (user) button.
3-46 NAVIGATION SYSTEM
button.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2011:08:16 10:02:32-07:00
Create Date                     : 2011:07:05 15:23:28+09:00
Metadata Date                   : 2011:08:16 10:02:32-07:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Format                          : application/pdf
Document ID                     : uuid:5fb83ccd-b6a4-4e30-b446-b9ea206a3d5b
Instance ID                     : uuid:dfd56b6d-1f32-40b5-80cc-645426325837
Producer                        : Adobe PDF Library 9.0
Has XFA                         : No
Page Count                      : 100
Creator                         : Adobe InDesign CS4 (6.0.6)
Trapped                         : False
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TQ8-AN240DKAN

Navigation menu