HYUNDAI MOBIS AVC40F6AN DIGITAL CAR AVN SYSTEM User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	3630812
Application ID	phqmGQal2Zrom+xtBjX/ng==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	262.4kB (3279981 bits)
Date Submitted	2017-11-07 00:00:00
Date Available	2018-05-06 00:00:00
Creation Date	2016-11-16 21:33:51
Producing Software	3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document Lastmod	2017-10-12 17:06:52
Document Title	Users manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	FEEL-6

Name
Traffic Pop-up
Description
Pop-up Icon
Symbol of traffic event
Road Name/Road Number
Distance from current location.
Estimated delay time.
Search detour route.
View the detailed information
regarding traffic event.
If there is “red traffic flow” on the route, a
traffic information pop-up is displayed.
On the traffic information pop-up window,
brief information is displayed and Details
Press
Detour
to change the route.
Press
Details
for further information.
Close the pop-up message.
Set not to display pop-up on the
current route. (Maintained until
the destination is reset)
and Detour can be selected.
If you do not wish to see this pop-up displayed again during the current route,
select
Ignore All Events on This Route
button
on the display.
On the traffic information pop-up, select
detour or details to perform action.
6-12 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-12
2016-11-04 오후 3:03:1
Save
Press the
Turn List
button on the bottom left of
the screen ▶ Select the
Save
Press the
button on the bottom left of
the screen ▶ Select the
Name
Turn List
Description
Change the name.
Enter the phone number.
To store the location on the current map to
the address book.
Select the ON , OFF button to
set the sound notification.
Possible to register Symbol.
P r e s s Icon&Name , Icon o r
None to display on the map
screen.
Turn on or off the Turn List.
06
Designate to the Favorite item.
When the favorite is designated,
press the button on the bottom
of the Destination menu and
request the route guide immediately.
Save the setting.
Menu I 6-13
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-13
2016-11-04 오후 3:03:2
Destination Search
Enter the POI Name, Address and Coordinates of the location you want in the input
Places
window above, and press the
Done
button.
You can enter POI Name, Address or
Coordinates that you wish to search by.
Press the
the
Navi
Menu
MAP
VOICE
head unit key. ▶ Select
in the bottom of right of the
screen. ▶ Select the
Select the
Destination
If you press the
tab. ▶
Filter by Category
button from
the search result screen, it will bring you to
the POI Categories screen where you can
Search Bar.
filter the search results by POI Categories.
If you select a location from the search
result list, it will bring you to the point.
Once the destination has been identified
either by POI name, address, or coordiIf you press the
Filter by City
button on the
nates, the map screen will be displayed.
search result screen, it will bring you to the
From this screen you can set the desti-
City search screen where you can filter the
nation or add a waypoint, or add the dis-
search results by city names.
played destination to your address book.
6-14 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-14
2016-11-04 오후 3:03:3
Address
How to Search Address
Set destination by address search.
Press the
the
Navi
Menu
MAP
VOICE
head unit key. ▶ Select
in the bottom of right of the
screen. ▶ Select the
Select the
Address
Destination
tab. ▶
icon.
Enter the address to check the location
Search criteria can be entered in any
order. Example:
then
Street
Name
then
State
then
House No.
information on the map.
City
Description
Select state to search.
Enter house number. If you don’t
know the house number, press
Skip button.
Name
Description
Set as
Destination
Set the location as a
destination.
Add
Waypoint
Set the location as a
waypoint.
Save
POI
Save the location.
Search nearby POIs.
Enter a street name. If same
street names exist in other cities,
the list of cities will be displayed.
06
Select a city before entering
the street name. Addresses are
searched only from the selected
city.
Destination Search I 6-15
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-15
2016-11-04 오후 3:03:3
Previous Destinations
Select from previously inputted addresses
and POIs.
Press the
the
Navi
Menu
MAP
VOICE
head unit key. ▶ Select
in the bottom of right of the
screen. ▶ Select the
Select the
Destination
Previous Destinations
icon.
tab. ▶
Arrange by all, latest destinations, latest
searched places and latest departing
Press the
places. Arrange in order of date and time.
information.
Name
Description
All
Display all destinations,
departing places, and
searched places.
Destinations
Display previous destination places for route
guidance.
Start Points
Display previous departing places for route
guidance.
Searches
D i s p l ay p r ev i o u s l y
searched places for
route guidance.
But, not displayed
when the searched
places are set as
destination.
Delete
Name
Mark All
Unmark All
Delete
button to delete the
Description
Select all.
Deselect all.
Delete the selected
item(s).
6-16 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-16
2016-11-04 오후 3:03:4
Local Search
Press the
the
MAP
VOICE
head unit key. ▶ Select
Navi
Menu
in the bottom of right of the
screen. ▶ Select the Destination tab. ▶
Select the
Local Search
icon.
Searching is in progress.
Press the
Set as Destination
button to start
guidance.
Runs Google Local Search.
If one or more results are found, the
search results are displayed. Select one of
06
the search result.
Enter the desired keywords and press the
Done
button.
Destination Search I 6-17
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-17
2016-11-04 오후 3:03:5
POI Categories
Press the
the
MAP
VOICE
Gas Stations
head unit key. ▶ Select
Search for gas stations.
Navi
Menu
in the bottom of right of the
screen. ▶ Select the Destination tab. ▶
Press the
Select the
the
POI Categories
icon.
MAP
VOICE
head unit key. ▶ Select
Navi
Menu
in the bottom of right of the
screen. ▶ Select the Destination tab. ▶
Select the
Gas Stations
icon.
Select the desired item in the sub-categories.
Name
Description
Select the desired destination
among the searched items and
add it as a way point.
Select the desired item.
Arrange in order of Distance and
Name.
Arrange in order of Near Current
Position, Near Destination, Along
Route, Near Scroll Mark and Near
City Center.
Select the desired destinations among the
search items.
6-18 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-18
2016-11-04 오후 3:03:5
Restaurants
Emergency
Search restaurants.
Press the
the
MAP
VOICE
Search emergency facilities.
head unit key. ▶ Select
Navi
Menu
Press the
the
MAP
VOICE
head unit key. ▶ Select
Navi
Menu
in the bottom of right of the
screen. ▶ Select the Destination tab. ▶
in the bottom of right of the
screen. ▶ Select the Destination tab. ▶
Select the
Select the
Restaurants
icon.
Emergency
icon.
Select the desired destination among the
06
searched items.
Select the desired destination among the
Check the current location information and
searched items.
select the desired item in the sub menu (ex.
Police Stations)
Destination Search I 6-19
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-19
2016-11-04 오후 3:03:5
Address Book
If you save address in the Favorites tab, you
Phone Number
Search the destination with the address
can set destinations easily by pressing the
Press the
book.
icons such as
the
Go Home
and
Office
at the
bottom of the Destination menu.
Press the
the
MAP
VOICE
head unit key. ▶ Select
in the bottom of right of the
screen. ▶ Select the Destination tab. ▶
Address Book
head unit key. ▶ Select
in the bottom of right of the
screen. ▶ Flick the screen in up direction to
scroll to the bottom row of icons in the
Destination tab. ▶ Select the Phone Number to
Navi
Menu
Select the
Navi
Menu
MAP
VOICE
search POI by phone.
icon.
Name
Description
Select the desired destination
from the searched items.
Search destination by phone number.
Edit the item.
Register a new Address.
Delete the desired item.
Select the desired group.
6-20 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-20
2016-11-04 오후 3:04:0
Type phone number to search. To search for
Freeway Exit/Entrance
a list of numbers based on a partial phone
Press the
number entry, enter a few numbers and
the
press
Done
to narrow the search results.
Navi
Menu
MAP
VOICE
head unit key. ▶ Select
in the bottom of right of the
screen. ▶ Select the
Freeway Exit/Entrance
to
search by freeway exit/entrance.
Press the
Set as Destination
button to start
guidance.
Select the desired destination among the
searched items.
Press the
Set as Destination
06
Type freeway name and exit/entrance.
button to start
guidance.
Destination Search I 6-21
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-21
2016-11-04 오후 3:04:0
Intersection
Press the
the
MAP
VOICE
Coordinates
head unit key. ▶ Select
Press the
Navi
Menu
the
MAP
VOICE
head unit key. ▶ Select
Navi
Menu
in the bottom of right of the
screen. ▶ Select the Intersection to
in the bottom of right of the
screen. ▶ Select the Coordinates to
search by intersection.
search by coordinates.
Press the
Set as Destination
button to start
guidance.
Type 1st Street name, the State, 2nd
There are two ways to search by coordi-
Street name.
nates (D.M.S or Decimal Degrees). After
typing coordinates, press the
Done
but-
ton to search.
6-22 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-22
2016-11-04 오후 3:04:1
Favorite Places
Set the route using your favorite places.
MAP
head unit key. ▶ Select
Press the VOICE
the
Navi
Menu
in the bottom of right of the
screen. ▶ Select the Destination tab. ▶
Select from favorite places.
Press the
Set as Destination
Press the
button to start
guidance.
Yes
Go Home
button then press the
button to set the Favorite ‘Go Home’.
On the button where locations are not registered, the
icon is displayed. When a
location is registered, the
button disap-
pears and the buttons 1 to 3 are displayed
06
as your favorite places.
Destination Search I 6-23
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-23
2016-11-04 오후 3:04:1
Route Setting
Destination Setting
The route can be set after searching for a
destination.
Office, Special 1, Special 2, and Special 3
can also be set as a Favorite using the same
steps.
After searching the destination, press the
Set as Destination
While the destination is set, the buttons
Set as Destination and Add Waypoint appear.
button to set the location
as a destination.
Press the desired button to change a destination or add a waypoint.
Pressing any of the Favorite Place buttons
will start the route guidance to the saved
Favorite address.
6-24 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-24
2016-11-04 오후 3:04:1
All Routes
Name
Description
Display total distance,
travel time. Select the
desired route.
Start Guidance
Star t the guidance
with the route.
Route Options
Change the route
option.
Route Info.
You can check route
information.
Edit Route
When the alternative routes option is
options are displayed based on faster time
Total
Freeway
D i s p l ay l e n g t h o f
freeway on the route.
Toll Road
Display length of toll
road on the route.
Ferry
Display length of Ferry
route on the route.
and shorter distance.
• Faster Time: Select time-optimized
route, being the fastest roads.
• Shorter Distance: Select short distance,
option “Faster Time” by default.
Edit the route.
Display total distance
of the route.
enabled in navigation setting, two routing
The route will be calculated using the
Alternative routes can be suggested if
necessary, SETUP key ▶ Navigation Icon
▶ Route ▶ Alternative: ON
irrespective of how fast or slow progress
06
will be calculated.
Destination Search I 6-25
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-25
2016-11-04 오후 3:04:1
Adding Waypoint
Registering Location
Name
Press the
Add Waypoint
button to set the
Description
Display the selected
point on the map screen.
position as a waypoint and search the
Press
Save
at the desired location to
register the location.
Move the selected item
up.
route.
Move the selected item
down.
Delete the selected
item.
Done
Press the button to finish editing.
Add Waypoint
Press the button to add
waypoint.
Enter the detailed information of the location to save.
6-26 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-26
2016-11-04 오후 3:04:2
Route Guidance
Displays the lane information at the current
location. Display the
recommended direction in white, travelable
direction in white, and
the non-travelable
direction in grey.
Show route guidance detailed information.
Route Guidance Screen
Displays the distance
to the destination and
the estimated time of
arrival. Press the button
to check the detailed
information. If no waypoint is set, you will see
the remaining distance
or estimated time of
arrival in turn each time
you click the button.
Arrival Time: Display the estimated time of
arrival.
Remaining Time: Display the time remaining until destination.
Description
Displays the distance
and direction to the
first turn point.
Cancel the route.
Navi
Menu
Enter the navigation
menu screen.
Destination Info
Displays the destination information.
Turn List
Turn on or off the Turn
List.
06
Name
Cancel
Route
Displays the distance
and direction to the
second turn point.
Destination Search I 6-27
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-27
2016-11-04 오후 3:04:3
Split Screen during Route Guidance
Detailed information for POIs around freeway exit is listed by pressing POI symbols.
Details
additional info can be displayed
on Freeway.
Approaching the turning point, the detailed
road and travel information is automatically
displayed on the right side of the screen.
Name
Description
• Turn Point: Displays
direction and shape
to turn shortly.
• Distance to tur n:
Displays distance to
next turn point.
Road name to maneuver: Info of the road.
Additional info of Freeway exit or Rest
area can be displayed by pressing the button Details .
Detail Distance Bar:
Displays distance to next
turn point.
6-28 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-28
2016-11-04 오후 3:04:4
Route Search
Display Route Information
MAP
VOICE
Press the
Canceling Route
Cancel the route.
MAP
Press the VOICE
head unit key. ▶ Select
Navi
in the bottom of right of the
the Menu
screen. ▶ Press the Route tab. ▶ Select
Cancel Route .
the
head unit key. ▶ Select
Navi
Menu
in the bottom of right of the
screen. ▶ Press the Route tab. ▶ Select
Route Info.
Check the information on the map. Select
the desired item to see the map information.
Avoiding a road
Click the
Press the
Cancel Route
icon.
button to avoid the
street or road.
icon.
06
Press the
Route Info.
Avoid Street
Check the desired item and press the
Done
Press the
Yes
button to finish.
button to cancel the route.
Route Search I 6-29
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-29
2016-11-04 오후 3:04:4
Route Overview
Route Preview
Check the information on route including
Check the detailed turn-by-turn list.
MAP
head unit key. ▶ Select
Press the VOICE
the distance, estimated time, toll fees, etc.
MAP
Press the VOICE
head unit key. ▶ Select
the
the
in the bottom of right of the
screen. ▶ Press the Route tab. ▶ Select
Name
Description
Route Options
Change the search
option.
Route Info.
You can check route
information.
Edit Route
Edit the current route.
Press the
Press the
in the bottom of right of the
Route
tab. ▶ Select
screen. ▶ Press the
Route Preview .
Navi
Menu
Route Overview
Navi
Menu
Route Overview
Route Preview
icon.
icon.
6-30 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-30
2016-11-04 오후 3:04:4
Editing Route
Edit the current route.
MAP
head unit key. ▶ Select
Press the VOICE
the
Navi
Menu
in the bottom of right of the
Route
tab. ▶ Select
screen. ▶ Press the
Edit Route
Name
Description
Departure
Place
Move to the departure
location.
Previous
Move to the previous
maneuver.
Forward
M o ve t o t h e n ex t
maneuver.
Destination
Move to the destination location.
Section
Displaying Bar
Touch bar to move to
the specific position.
Description
Display the selected
point on the map
screen.
Move the selected
item up.
Press the
Edit Route
Move the selected
item down.
icon.
Delete the selected
item.
Done
Press the button to
finish editing.
Add Waypoint
Press the button to
add an waypoint.
06
Close the route preview.
Name
Route Search I 6-31
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-31
2016-11-04 오후 3:04:5
Route Options
MAP
VOICE
Press the
the
Avoid Street
head unit key. ▶ Select
Navi
Menu
in the bottom of right of the
screen. ▶ Press the Route tab. ▶ Select
Route Options
Search new route by avoiding the selected
street(s).
Press the
the
MAP
VOICE
head unit key. ▶ Select
Navi
Menu
in the bottom of right of the
screen. ▶ Press the Route tab. ▶ Select
Avoid Street
Add the waypoint through various searching methods.
Press the
Route Options
icon.
Press the
Avoid Street
icon.
Determine the route options to guide the
route.
Press the
Done
to plan new route after
selecting the street(s) that you want to avoid.
6-32 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-32
2016-11-04 오후 3:05:0
Navigation Settings
Display
Change the display map settings.
General
Change general settings.
Press the
GPS Information
to display the
detail GPS satellites information.
Receiving
Name
Description
Description
Active when current position is being calculated.
Unit
Change the unit of
mile , km .
Speed
Display current speed of
the vehicle.
Location
Show Previous
Destinations
after Navigation
Start-Up
Press the ON , OFF
button to change
the previous destination view setting
when starting the
navigation.
Display current position of
the vehicle.
Elevation
Display current elevation
of the vehicle.
Time
Display time.
Date
Display date.
GPS Information
Check the GPS
information.
Change the map colors and the route
guidance line colors.
Change the vehicle symbol.
06
Name
Press the
Restore factory
settings
Restore factory
settings
button to initialize.
Navigation Settings I 6-33
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-33
2016-11-04 오후 3:05:0
Guidance
Route
Change the guidance setting.
Name
Number of
Guidance
Prompts
Description
Traffic
Change the route setting.
Change the traffic information setting.
Press the
Press the
ON
or
OFF
button to change
ON
the Alternative Routes setting.
the settings.
or
OFF
button to change
Set the frequency of
guidance.
• Alternative on: Alternative routes will
• Show Traffic Information On/Off: Select
Fewer
Route guidance is given
less frequently.
be suggested (depending on the route
whether to display traffic information or
More
Guidance will be provided frequently.
“Shorter Distance”).
Curve Alert
Change whether to turn
curve aler t ON and
OFF .
Speed Limit
Change whether to show
speed limit by pressing
ON and OFF .
preference between “Faster time” and
NOTICE
• Alternative routes can be shown only while
the vehicle is not moving.
not.
• Traffic Event Pop-up Freeway On/Off:
Select whether to display Pop-up message for traffic information on freeway.
• Traffic Event Pop-up Surface Road On/
Off: Select whether to display Pop-up
• Alternative off: No alternative routes will
be suggested. Guidance will start right
message for traffic information on surface road.
after calculating with the route preference (Faster time or Shorter distance).
6-34 I Navigation
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-34
2016-11-04 오후 3:05:1
Troubleshooting
Correct route guidance may not occur due to search conditions or
driving position.
The current position as shown on the navigation may differ from
The following occurrences are not malfunctions :
the actual position under the following conditions.
• Guidance to go straight may be • Route guidance signaling
given while driving on a straight
entrance into a No-entry zone
road
may occur (No-entry zone, road
• Guidance may not be given even
under construction, etc.)
when having turned at an inter- • Guidance may be given to a posisection
tion that is not the actual destina• There are certain intersections in
tion if roads to reach the actual
which guidance may not occur
destination do not exist or are too
• A route guidance signaling for
narrow
a u-turn may occur in some No • Faulty voice guidance may be
u-turn intersections
given if the vehicle breaks away
from the designated route. (e.g. if
a turn is made at an intersection
while the navigation provided
guidance to go straight.)
• When driving under slippery conditions, such as heavy sand, snow, etc.
• When driving on spiral-shaped roads
• When the tires have recently been
replaced (Especially upon use of
spare or studless tires).
• When using tires of improper size
• When the tire pressure for the 4 tires
are different
• When the replacement tire is worn or
used (Especially studless tires having passed a second season).
• When driving near high-rise buildings
• When a roof carrier has been
installed
• When a long distance route is calculated while driving on an expressway
In such cases, continued driving will
automatically enable the system
to conduct map matching or use
updated GPS information to provide the current position (In such
cases, up to several minutes may be
required)
These situations may occur after conducting route calculation.
The following occurrences are not malfunctions :
• Guidance may be given to a
position differing from the current
position when turning at an intersection
• When driving in high speeds,
route recalculation may take a
longer period of time
• Route guidance signaling for a
u-turn may occur in some No
u-turn intersections
• Route guidance signaling entrance
into No-entry zone may occur.
(No-entry zone, road under construction, etc.)
• Guidance may be given to a position
removed from the actual destination
if roads to reach the actual destination do not exist or are too narrow
• Faulty voice guidance may be given
if the vehicle breaks away from the
designated route (e.g. If a turn is
made at an intersection while the
navigation provided guidance to go
straight.)
06
The following occurrences are not malfunctions :
• When driving on Y-shaped roads
with narrow angles the current
position may be displayed in the
opposite direction
• Within city streets, the current position may be displayed on the opposite side or on an off-road position
• When changing the zoom level
from maximum to a different level,
the current position may become
displayed on a different road
• If the vehicle is loaded onto a ferry
or a car transport vehicle, the current position may become stalled
on the last position prior to loading
• When driving on a spiral-shaped
road
• When driving in mountain regions
with sharp turns or sudden brakes
• When entering a road after passing
an underground parking structure,
building parking structure, or roads
with many rotations
• When driving in heavy traffic with
frequent starts and stops
Troubleshooting I 6-35
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-35
2016-11-04 오후 3:05:2
END USER LICENSE AGREEMENT
PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY BEFORE USING THE NAVIGATION SYSTEM.
This is a license agreement between you and Hyundai MnSoft, INC. including its affiliates (“COMPANY”) regarding a copy of the
COMPANY navigable map database together with associated software, media and explanatory printed documentation published by
COMPANY(jointly the “Product”). The Product is provided for your personal, internal use only and not for resale. It is protected by copyright
and is subject to the following terms which are agreed to by you, on the one hand, and COMPANY and its licensors (and their licensors
and suppliers) (collectively, “Licensors”) on the other hand.
By using the Product, you accept and agree to all terms and conditions in this End User License Agreement (“EULA”). IF YOU DO NOT
AGREE TO THE TERMS OF THIS EULA, YOU MUST PROMPTLY EXIT THE PRODUCT OPERATION PROGRAM AND DO NOT USE
OR ACCESS TO THE PRODUCT. YOU AGREE THAT YOUR RIGHTS UNDER THIS EULA MAY BE TERMINATED AUTOMATICALLY
WITHOUT NOTICE IF YOU FAIL TO COMPLY WITH ANY TERM(S) OF THIS EULA.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-36
2016-11-04 오후 3:05:2
Terms and Conditions
Personal Use Only. You agree to use this Product together with COMPANY’s authorized application for the solely personal, non-commercial purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes. Accordingly, but subject to
the restrictions set forth in the following paragraphs, you agree not to otherwise reproduce, copy, modify, decompile, disassemble, create
any derivative works of, or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose,
except to the extent permitted by mandatory laws. You may not assign this EULA or any of the rights or licenses granted under this EULA,
except when installed in the system for which it was created.
Restrictions. Except where you have been specifically licensed to do so by COMPANY, and without limiting the preceding paragraph, you
may not use the Product (i) with any products, systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management or similar applications; or (ii) with or
in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs.
COPYING OR USE OF THE PRODUCT EXCEPT AS PERMITTED BY THIS EULA IS UNAUTHORIZED AND IS COPYRIGHT
INFRINGEMENT UNDER THE LAWS OF YOUR COUNTRY. IF YOU COPY OR USE THE PRODUCT WITHOUT COMPANY’S
PERMISSION, EXCEPT AS PERMITTED BY THIS EULA, YOU ARE VIOLATING THE LAW AND LIABLE TO COMPANY AND ITS
LICENSORS FOR DAMAGES, AND YOU MAY BE SUBJECT TO CRIMINAL PENALTIES.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-37
2016-11-04 오후 3:05:2
THE PRODUCT MAY INCLUDE ENFORCEMENT TECHNOLOGY DESIGNED TO PREVENT (i) UNAUTHORIZED COPYING OF
THE PRODUCT ONTO PHYSICAL STORAGE MEDIA OR VIA TRANSFER OVER THE INTERNET OR OTHER ELECTRONIC
COMMUNICATION MEANS AND/OR (ii) ILLEGAL USAGE OF THE PRODUCT OTHER THAN BY A SPECIFICALLY AHTORIZED
DEVICE. YOU AGREE THAT COMPANY MAY USE THESE MEASURES TO PROTECT COMPANY AND THE LICENSORS AGAINST
COPYRIGHT INFRINGEMENT.
Uploads. The Product may provide functionality through which you are able to upload certain information about your use of the Product
(collectively, “Uploads”) to COMPANY’s servers or receive other services from COMPANY (collectively, the “Services”). If you use such
functionality, you authorize COMPANY to retain your Uploads on its servers. COMPANY will have no obligation to provide any Services,
may change the form and nature of any Services at any time with or without notice to you, will have no liability whatsoever to you for any
failure of the Product or Services to transmit your Uploads to or from COMPANY’s servers, may cease providing any Services at any time
with or without notice to you, and will have no obligation to retain your Uploads (or any other materials you may provide to COMPANY) on
its servers or return your Uploads (or any other materials you may provide to COMPANY) to you before deleting them from its servers.
Storage. The Product may provide functionality through which you are able to store information (such as images) on the device on which
you are using the Product. COMPANY will have no liability whatsoever to you or any third party for any failure of the Product to store any
such information on such device.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-38
2016-11-04 오후 3:05:2
Personal Information. By using the Product, you agree to the collection, retention and processing of your personal data (including the location of your mobile device) by COMPANY and to the storage and processing of such personal information on computers located outside
of the country in which you reside. Even though COMPANY has taken steps intended to protect your personal information from being
intercepted, accessed, used, or disclosed by unauthorized persons, COMPANY cannot fully eliminate security risks associated with your
personal information and cannot guarantee that its systems will not be breached. See [*] for additional information regarding COMPANY’s
use of your personal information.
WARNING. THE PRODUCT REFLECTS REALITY AS EXISTING BEFORE YOU RECEIVED THE PRODUCT AND IT COMPRISES
DATA AND INFORMATION FROM GOVERNMENT OTHER SOURCES. ACCORDINGLY, THE PRODUCT MAY CONTAIN INACCURATE
OR INCOMPLETE INFORMATION DUE TO THE PASSAGE OF TIME, CHANGING CIRCUMSTANCES, SOURCES USED AND
THE NATURE OF COLLECTING COMPREHENSIVE GEOGRAPHIC PRODUCT, ANY OF WHICH MAY LEAD TO INCORRECT
RESULTS. THE PRODUCT AND SERVICES MAY NOT TO BE USED FOR SAFETY OF LIFE APPLICATIONS, OR FOR ANY OTHER
APPLICATION IN WHICH THE ACCURACY OR RELIABILITY OF THE PRODUCT OR SERVICES COULD CREATE A SITUATION
WHERE PERSONAL INJURY OR DEATH MAY OCCUR. DO NOT ATTEMPT TO CONFIGURE THE PRODUCT OR INPUT
INFORMATION WHILE DRIVING. FAILURE TO PAY FULL ATTENTION TO THE OPERATION OF YOUR VEHICLE COULD RESULT IN
DEATH, SERIOUS INJURY, OR PROPERTY DAMAGE. BY USING THE PRODUCT, YOU ASSUME ALL RESPONSIBILITY AND RISK.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-39
2016-11-04 오후 3:05:2
Disclaimer of Warranty. The Product is provided to you “as is,” and you agree to use it at your own risk. SUBJECT TO THE APPLICABLE
LAWS, COMPANY AND THE LICENSORS MAKE NO GUARANTEES, REPRESENTATIONS OR WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO, CONTENT, QUALITY, ACCURACY,
COMPLETENESS, EFFECTIVENESS, RELIABILITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, NON-INFRINGEMENT, USEFULNESS, USE OR RESULTS TO BE OBTAINED FROM THE PRODUCT, OR THAT
THE PRODUCT OR SERVER WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT ERRORS IN THE PRODUCT OR
NONCONFORMITY TO ITS DOCUMENTATION CAN OR WILL BE CORRECTED. YOU ACKNOWLEDGE THAT THE PROVISIONS OF
THIS SECTION ARE A MATERIAL INDUCEMENT AND CONSIDERATION TO COMPANY AND THE LICENSORS TO GRANT THE
LICENSE CONTAINED IN THIS EULA AND TO PROVIDE YOU WITH ACCESS TO THE SERVICES.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED UNDER THE APPLICABLE LAWS, COMPANY AND THE LICENSORS
SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE
CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, INCURRED
BY YOU OR ANY THIRD PARTY WHICH MAY ARISE IN CONNECTION WITH OR RESULT FROM THE USE OR POSSESSION OF
THE PRODUCT; OR FOR ANY LOSS OF DATA, PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR OTHER DIRECT, INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THE PRODUCT,
ANY DEFECT IN THE PRODUCT, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT
OR TORT OR BASED ON A WARRANTY, EVEN IF COMPANY OR THE LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES AND NOTWITHSTANDING THE FAILURE OF ANY LIMITED REMEDY PROVIDED HEREIN.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-40
2016-11-04 오후 3:05:2
Exclusions. Some jurisdictions do not allow certain warranty exclusions or the limitation or exclusion of liability, so to that extent the above
exclusion may not apply to you. To the extent that COMPANY may not, as a matter of applicable law, disclaim any implied warranty or limit
its liabilities, the scope and duration of such warranty and the extent of COMPANY’s liability shall be the minimum permitted under such
applicable law. The disclaimer of warranty and limitation of liability set forth in this EULA does not affect or prejudice your statutory rights
where you have acquired the Product otherwise than in the course of business.
Third-Party Copyright Notices. The third-party sourced data has been incorporated into or made a part of the Product and is being sublicensed to you subject to the terms and conditions of this EULA. In this regard, you shall not remove or tamper with any intellectual property rights notice attached or used in relation to data supplied by the Licensors.
Entire Agreement. This EULA is the entire agreement between COMPANY (and the Licensors) and you pertaining to the subject matter
hereof, and supersedes in their entirety any and all previous written or oral communications or documents (including, if you are obtaining
an update, any agreement that may have been included with an earlier version of the Product) with respect to such subject matter.
Governing Law. This EULA shall be governed by the laws of the jurisdiction in which you reside at the date of acquisition of the Product.
Should you at that moment reside outside the European Union or Switzerland, the law of the jurisdiction within the European Union or
Switzerland where you acquired the Product shall apply. In all other cases, or if the jurisdiction where you acquired the Product cannot
be defined, the laws of the Republic of Korea shall apply. This EULA will not be governed by the U.N. Convention on Contracts for the
International Sale of Goods. The courts competent at your place of residence at the time you acquired the Product shall have jurisdiction
over any dispute arising out of, or relating to this EULA, without prejudice to COMPANY’s right to bring claims at your then current place of
residence.
Export Control. You agree not to export or re-export from anywhere any part of the Product in any form except in compliance with applicable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign
Assets Control of the U.S. Department of Commerce and the Bureau of Industry and Security of the U.S. Department of Commerce.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-41
2016-11-04 오후 3:05:2
Miscellaneous. If any provision of this EULA is found to be invalid or unenforceable, it will be enforced to the extent permissible and the
remainder of this EULA will remain in full force and effect. Failure by COMPANY to prosecute any right with respect to a default hereunder will not constitute a waiver by COMPANY of the right to enforce rights with respect to the same or any other breach. No refunds or
replacements will be permitted on damaged Product.
U.S. Government End Users. If the Product is being acquired by or on behalf of the United States Government or any other entity seeking or applying rights similar to those customarily claimed by the United States Government, this Product and related documentation are
“Commercial Items” as that term is defined at 48 C.F.R. (“FAR”) 2.101. This Product and related documentation are licensed to the United
States Government end users (a) only as “Commercial Items” and (b) with only those rights as are granted to all other end users in accordance with this EULA, and each copy of Product delivered or otherwise furnished shall be marked and embedded as appropriate with the
following “Notice of Use,” and shall be treated in accordance with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: Hyundai MnSoft, Inc.
CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 74 Wonhyo-ro, Yongsan-gu,
Seoul 140-711, Republic of Korea
This Product and related documentation are commercial items as defined in FAR 2.101 and is
subject to this EULA under which this Product is provided.
© 2013 Hyundai MnSoft. All rights reserved.
If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify COMPANY prior to seeking additional or alternative rights in the Product.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-42
2016-11-04 오후 3:05:2
End-User Terms Required by HERE. The Product utilizes map data that COMPANY licenses from HERE and the following copyright
notices apply to such map data (the “HERE Data”): © 2013 HERE. All rights reserved.
The HERE Data for areas of Canada includes information taken with permission from Canadian authorities, including: © Her Majesty the
Queen in Right of Canada, © Queen’s Printer for Ontario, © Canada Post Corporation, GeoBase ®, © Department of Natural Resources
Canada. All rights reserved.
HERE holds a non-exclusive license from the United States Postal Service® to publish and sell ZIP+4® information.
©United States Postal Service® 2010. Prices are not established, controlled or approved by the United States Postal Service®. The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4.
The HERE Data for Mexico includes certain data from Instituto Nacional de Estadística y Geografía.
Austria: © Bundesamt für Eich- und Vermessungswesen
Croatia, Cyprus, Estonia, Latvia, Lithuania, Moldova, Poland, Slovenia and/or Ukraine: © EuroGeographics
France: source: © IGN 2009 – BD TOPO ®
Germany: Die Grundlagendaten wurden mit Genehmigung der zustaendigen Behoerden entnommen
Great Britain: Contains Ordinance Survey data © Crown copyright and database right 2010, and Royal Mail data © Royal Mail copyright
and database right 2010.
Greece: Copyright Geomatics Ltd.
Italy: La Banca Dati Italiana è stata prodotta usando quale riferimento anche cartografia numerica ed al tratto prodotta e fornita dalla
Regione Toscana.
Norway: Copyright © 2000; Norwegian Mapping Authority
Portugal : Source: IgeoE – Portugal
Spain: Información geográfica propiedad del CNIG
Sweden: Based upon electronic data Ó National Land Survey Sweden
Switzerland: Topografische Grundlage: Ó Bundesamt für Landestopographie
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-43
2016-11-04 오후 3:05:2
United Kingdom: Contains public sector information licensed under the Open Government Licence v1.0 (see for the license http://www.
nationalarchives.gov.uk/doc/open-government-licence/) and is adapted from data from the office for National Statistics licensed under the
Open Government Licence v.1.0.
Israel: © Survey of Israel data source
Jordan: © Royal Jordanian Geographic Centre. The foregoing notice requirement for Jordan Data is a material term of the Agreement. If
Client or any of its permitted sublicensees (if any) fail to meet such requirement, HERE shall have the right to terminate Client’s license
with respect to the Jordan Data.
Mozambique: Certain Data for Mozambique provided by Cenacarta © 20XX by Cenacarta
Réunion: source: © IGN 2009 - BD TOPO ®
End-User Terms Required by ZENRIN. The Product utilizes map data that COMPANY licenses from ZENRIN and the following copyright
notices apply to such map data (the “ZENRIN Data”):
Europe: Junction View Data provided by ZENRIN CO., LTD. Copyright © 20XX, All Rights Reserved.
Europe: Junction View Data and Exit View Data provided by ZENRIN CO., LTD. Copyright © 20XX, All Rights Reserved.
North America: Junction View Data provided by ZENRIN USA, INC. Copyright © 20XX, All Rights Reserved; Junction View Data fourni par
ZENRIN USA, INC. Copyright © 20XX. Tous droits réservés; Las imágenes de las rutas alternas son proveídas por ZENRIN USA, INC.
Copyright © 20XX. Todos los derechos reservados.
© 2013 Hyundai MnSoft. All rights reserved.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-44
2016-11-04 오후 3:05:2
Copyright for Brand Icon
The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of
such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
Copyright for Junction View
Junction View Data provided by ZENRIN USA, INC. Copyright(C) 20XX, All rights Reserved.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-45
2016-11-04 오후 3:05:2
About Map Updates
• You can contact your KIA dealer or call at 1-888-757-0010.
Information
• This product requires regular updates for software corrections, new functions and map updates. Updating may require up to 1 hour
depending on the data size.
• Turning off the power or ejecting the SD card during the update process may result in data loss. Make sure to keep the ignition on and
wait until updating is complete.
CAUTION
• Please use only the SD card that was included with the vehicle purchase.
• The use of a separately purchased SD card may result in damage due to heat related deformation.
• Product malfunctions caused by the use of separately purchased SD cards shall not be covered within the product warranty.
• Repeatedly connecting/disconnecting the SD card in a short period of time may cause damage to the device.
K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-46
2016-11-04 오후 3:05:2
part.6
Voice Recognition
What is Voice Recognition?
Precautions Required for Successful Voice Recognition
Starting/Ending and Setting Voice Recognition
Voice Recognition Screen Overview
Voice Commands
Siri Eyes Free
Voice Recognition
What is Voice Recognition?
The voice recognition feature operates the
Precautions Required
for Successful Voice
Recognition
4. The microphone used for the voice
recognition system is located in the
headliner directly above the driver's
multimedia system by recognizing voice
head. To make your commands better
commands and enables hands-free oper-
1. Voice recognition supports only the
understood, keep your body straight
ation of the system while you are driving
commands that are displayed on the
in the driver's seat when speaking the
your car.
screen and written in the User's Guide.
command.
Not all possible voice commands are rec-
2. To ensure the correct recognition and
5. Speaking naturally and clearly will
ognized by the system due to technological
execution of your command, say your
ensure better recognition of your voice
limitations. To make up for these limitations,
command when you hear the beep after
commands.
the system displays the voice commands
that are available for you to use.
a voice prompt.
6. In the following cases voice recognition
3. Voice recognition automatically ends if:
There are errors in communication between
1) A call is incoming or outgoing
people. Likewise, voice recognition some-
2) A media device (USB or iPod, etc.) is
times misunderstands your voice command
3) The rear view camera is operated
either check the screen for the available
4) The car engine starts or stops
5) A system key, such as RADIO
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
1) The sound of the wind if any window
connected or disconnected
in some circumstances. If this happens,
or
MEDIA
key is selected
will be affected by ambient noise.
or the sun roof is open.
2) High speed blower from the air vents.
Set climate control to blow lower than
level 3.
key
3) Vibrations from passing through a
tunnel.
4) Vibrations from driving on an uneven
road.
5) Storms and heavy rain.
5-2 I Voice Recognition
Starting/Ending
and Setting Voice
Recognition
Starting Voice Recognition
Press the
key briefly (less than 0.8
Ending Voice Recognition
1. Select “Exit” to the left of the bottom to
After pressing the
end voice recognition.
2. Press and hold (more than 0.8 seckey on the steering
onds) the
wheel control to end voice recognition.
Combining Voice Recognition
with On-Screen Commands
key, say a com-
mand after the beep. The voice recognition
system will execute the desired operation
after understanding the command.
seconds) on the steering wheel control to
Alternatively, you may touch any of the
activate voice recognition.
corresponding Commands on the screen
while the Voice Recognition system is in
operation.
Combining voice recognition with available
on-screen commands is useful when the
system is taking longer than expected or
the voice command did not execute as
05
desired.
Starting/Ending and Setting Voice Recognition I 5-3
Extending the Listening Time
When the system is waiting for your command, after the voice prompt and beep
have been heard, if you press the
key (less than 0.8 seconds), then the beep
will sound again and standby mode will
restart.
When activated, voice recognition waits for
your command for 5 seconds. If you say
nothing for 5 seconds, a voice prompt will
ask for your command again.
5-4 I Voice Recognition
Skipping Prompt Messages
Adjusting Voice
Recognition Volume
When you hear the prompt message,
key on the steering
press the
During voice recognition, rotate the vol-
wheel control to skip the message and go
ume knob to adjust the message volume.
directly to listening mode to say your command.
This results in faster operation when
you feel the message is too long or you
already know the command to use.
i Information
05
• Refer to Part 8 for instructions on how to
change the Voice Recognition Settings.
Starting/Ending and Setting Voice Recognition I 5-5
Voice Recognition
Screen Overview
Start Screen
Name
Description
Representative Displays the represenCommands
tative commands.
Not available
command
Displays commands
that are not available
due to a failure in
meeting the conditions
for using them and
thus need additional
settings. The conditions
required for using them
will be described briefly
under each command.
5-6 I Voice Recognition
Name
Description
Help Display
Standby
Voice
recognition
status icons
Voice guidance
Voice command
process
Recognized
results
Displays the voice recognition result.
User's
speaking
volume being
recognized
Displays the voice
command volume in
real time.
Help
Displays all available
help commands in a
tree format.
Exit
Ends the voice recognition.
Name
Description
Command
list
• Shows the available
commands.
• Select or say a command
to display additional commands in detail.
How to
use for
selected
item
This section shows how to
use voice recognition for
the selected item.
How to use
in general
This section displays how
to use voice recognition in
general.
Instructions for Using
Voice Recognition
Description
Detail
instruction
This section describes
how to use voice recognition in detail.
Close
button
Closes the screen and
restarts voice recognition.
05
Name
i Information
• In the instructions screen, no voice is
recognized, so you must manually issue
commands. Because the instructions screen
displays a lot of content, you cannot view it
while driving for safety precautions.
Voice Recognition Screen Overview I 5-7
Voice Commands
Types of Commands
Voice recognition commands are classified as “Global Commands”
and “Local Commands”.
1. Global Commands (●): Commands that can be used immedi-
Command
●
Call
Displays downloaded Contacts, after this
you can make a call by saying the name.
●
Call 
You can directly call a person by  in
the downloaded Contacts.
●
Call 
on Mobile
You can call a person  directly to
the number that is saved as “Mobile” in the
downloaded Contacts.
e.g.) Call “John Smith” on Mobile
●
Call 
at Work
You can call a person  directly to the
number that is saved as “Work” in the downloaded Contacts.
e.g.) Call “John Smith” at Work
●
Call 
at Home
You can call a person  directly to
the number that is saved as “Home” in the
downloaded Contacts.
e.g.) Call “John Smith” at Home
●
Call 
on Other
You can call a person  directly to the
number that is saved as “Other” than “Mobile,
Home, or Work” in the downloaded Contacts.
e.g.) Call “John Smith” on Other
●
Dial Number
Displays a screen where you can say a
phone number to dial.
●
Dial 
You can directly say the number to call.
e.g.) Dial 111 555 1234
●
Redial
Directly calls at the number that you last
dialed.
●
Call History
Displays your Call History, where you can
say the list number to make a call.
ately after activating voice recognition.
2. Local Commands (○): Commands that can be used when a
multimedia or Bluetooth function is running, or displayed on the
screen, after activating voice recognition.
Call Commands
* Check the following before using call commands:
1. Voice commands related to phone calls can be used after connecting a Bluetooth device.
2. To call a person, for example “Call ” whose name
is listed in Contacts, you must first download the Contacts list.
For details on downloading contacts, see “Part 3. Bluetooth >
Chapter 3. Bluetooth Phone > 3.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time
to convert the Contacts into voice data during which time you
cannot make a call by name yet. The time it takes to convert
voice data may vary depending on the number of Contacts
downloaded on the phone.
5-8 I Voice Recognition
Operation
Radio Commands
Operation
●
Radio
Plays the most recent radio channels
from FM, AM, and SiriusXM™.
●
FM
Plays FM radio.
●
FM
<87.5~107.9>
Tunes to FM  according to
what you say.
e.g.) FM 87.5: FM eighty seven point five
●
SiriusXM
Plays SiriusXM™ radio.
●
SiriusXM
<0~999>
Tunes to SiriusXM™ Channel  according to what you say.
e.g.) SiriusXM 23: SiriusXM Twenty three
●
AM
Plays AM radio.
●
AM <530~1710>
Tunes to AM  according to
what you say.
e.g.) AM 530: AM Five thirty
○
Preset <1~40>
Tunes to your preset stations (1 to 40).
○
Channel
<0~999>
In SiriusXM™ Radio mode, turns on the
 that you say.
05
Command
Voice Commands I 5-9
Media Commands
* Check the following before you use media commands.
Command
●
Music
Continues the last media you played.
iPod
Plays the iPod currently connected. This
will work the same when an iPhone is connected. If a USB is connected, then it will
be played instead of the iPod.
●
USB
Plays the music on the USB currently connected.
If an iPod is connected, then the iPod will
be played instead of the USB.
●
Bluetooth Audio
Plays the music on the Bluetooth phone
currently connected.
This may not be supported depending on
the Bluetooth connection status.
●
AUX
Plays external devices that are currently
connected.
●
My Music
Plays My Music files stored in the system.
1. If no media is connected or if no playable files exist at the time
when you use these commands, a voice message will tell you
●
that this is not available.
2. If you say the name of the media that is currently playing again,
then that media will continue playing.
e.g.) Saying “USB” while USB content is playing.
5-10 I Voice Recognition
Operation
Command
Operation
○
Play
Plays a selected file.
Maintains the current settings during playback.
○
Pause
Pauses a file that is playing.
Maintains current settings while paused during
playback.
○
Shuffle
Plays tracks or files randomly.
Maintains current settings during shuffled
playback.
○
Shuffle Off
Cancels Shuffle and plays tracks sequentially.
Maintains current settings during sequential
playback.
○
Repeat
Plays the current track or file repeatedly.
Maintains the current settings during repeat playback.
○
Repeat Off
Cancels Repeat and plays multiple tracks or files.
Maintains current settings during multiple track
playback.
2. Bluetooth audio/AUX Command
For Bluetooth audio and external devices (AUX), local commands
are unavailable, including Play, Pause, Repeat and Shuffle.
05
1. USB Music/iPod/My Music Command
Voice Commands I 5-11
UVO eServices Commands List
Command
Operation
●
Roadside Assist
Connect with a Roadside Assist agent.
●
Vehicle
Diagnostics
Informs you if diagnostic issues are found
in your vehicle
eService Guide
Provides guidance on how to use UVO
eServices
●
5-12 I Voice Recognition
Other Commands List
(Commands used in List/Help)
Command
Operation
Help
Moves to the voice recognition help screen.
All available commands can then be identified and used.
○
Line 1~4
(One~Four)
When you cannot select a certain name,
such as in Call History, you can select it
using numbers.
Simple numbers can be recognized, such
as “One” or “Two”.
○
Yes/No
When voice recognition is activated, this
command is used when an answer is
requested for a confirmation question.
○
Previous/Next
When four or more searched items are
listed, you can move to the previous or
next page using a voice command.
○
Manual Input
When Dial entry results are displayed,
this command is used to search manually,
rather than to search with a voice command.
Voice recognition stops after this command
is used.
○
Go Back
Moves to the previous screen.
●
Exit
Ends the voice recognition.
●
How to start Siri
How to use Siri
When you access the Siri screen while
key on the
pressing and holding
If you want to use Siri, you have to con-
steering wheel, you select the
nect your iOS device to the Multimedia
ton and then you can speak what you
system through Bluetooth.
want. Note that the Multimedia system
(Please check whether your iOS device
only supports “Phone” related functions.
supports Siri and turning Siri On)
Other functions will be performed in your
Then you can use Siri while pressing and
key on the steering wheel.
holding
iOS device. If you press voice key quickly,
Speak
but-
Siri would re-start. If you hold down voice
key, Siri would be terminated and the
screen would go back to the previous
screen. Eyes-Free mode would be activated automatically while you are driving.
i Information
• Functions and feedbacks from voice
commands via Siri are executed in the iOS
device. If the iOS version is changed, the
functions and response may be different
according to the iOS device and the latest
version.
When shifting gears into P or putting the
Parking brake on, Eyes-Free mode would
be deactivated automatically.
05
Siri Eyes Free
Siri Eyes Free I 5-13
MEMO
part.7
Apps/Info
SiriusXM™ Data
Apps/Info
SiriusXM™ Data
Accessing SiriusXM™ Data
Select the
About SiriusXM™ Data Service
The SiriusXM™ Data Service is a paid membership satellite radio
service that provides users with information such as Weather,
Sports, Stocks, Fuel Prices and Movies.
However, weather information is not supported for vehicles purchased in Canada.
6-2 I Apps/Info
APPS/
SiriusXM Data
icon after selecting All Menus or the
key to enter the SiriusXM™ Data mode.
SiriusXM™ Weather
Announcement
Weather Forecast
Warnings and Advisories
This service provides current weather
This service provides weather warnings
At the “SiriusXM Data” screen, select
information and weather forecasts for the
and advisories, such as tornado, storm,
icon to enter the Weather
next five days in your region. To change
flood, etc.
Weather
Announcement mode.
the region, select the
Other City
button and
select the desired region.
06
the
SiriusXM™ Data I 6-3
SiriusXM™ Sports Information
My Teams
You can always check the list of teams
You can save teams which you are inter-
that you added in the “My Teams” menu.
Sports mode.
ested in as part of My teams to easily view
Select the
This service provides real-time updated
related scores and schedules.
the team name to delete the team from
information on scores and schedules for
Select the My Teams menu and then
“My Teams” or select the
major sports, such as NFL, NBA, NCAA
select the
football, NCAA basketball, NHL, MLB,
register your favorite teams.
NASCAR and more.
Search for your favorite teams and select
Select the
Sports
icon to enter the
the
Add
button on the right to add it to the
“My Teams” list.
6-4 I Apps/Info
button to search for and
button on the right side of
add other teams.
Add
button to
Select the team name to check daily
SiriusXM™ Stock Information
results and recent schedules for that team.
In the “SiriusXM Data” screen, select the
Stocks
icon to enter the Stocks mode.
Stocks is a feature that shows the current
value and change of stocks.
For symbols which you are interested in,
select the icon to save the symbol as a
part of the “Saved” symbols which can be
viewed from the “My Favorites” button on
06
the Stocks Main screen.
SiriusXM™ Data I 6-5
My Favorites
Stock Search
In the My Favorites screen, you can find
My Favorites shows a list of stocks added
Use the Stock Search menu to search for
the selected stock information that you
by the user. When entering the Stocks
specific stocks.
registered.
menu for the first time, a screen is dis-
Select the
played for you to add your favorite stock
your favorite stocks to save them in “My
information. Select the
Add
button to
move to the stock search screen.
6-6 I Apps/Info
Favorites”.
button after searching for
At the “SiriusXM Data” screen, select the
Fuel Prices
icon to enter the Fuel Prices
Information mode.
Search for Nearby Stations, and
Register Key Locations as Favorite
Stations.
Select the
Search for nearby stations with the “Nearby
the “Favorite Stations” menu.
button to the right of the list
to register key locations as a Favorite
Station so that you can go there again with
Stations” menu.
It shows station locations, starting from the
nearest one, and select “Nearest” menu
on the top right side to further sort them
by price or brand name.
06
SiriusXM™ Fuel Price
Information
SiriusXM™ Data I 6-7
My Fuel Type Settings
SiriusXM™ Movie Information
icon to enter the
types and favorite brands.
Movie mode.
Search for Nearby Theaters, and
Register Any Key Locations as Favorite
Theaters.
When searching for Nearby Stations, the
You can check recent movies and nearby
In the “Nearby Theaters” menu, you can
results will reflect selected fuel types and
theaters, and also register your favorite
search for any nearby theaters.
brand information.
theater locations.
It shows theaters, starting from the nearest
With the “Filters” menu, you can select fuel
Select the
Movies
one, and selecting the “Nearest” menu at
the top right side will sort them by name.
6-8 I Apps/Info
button to the right of the list
In the “Top Movies” menu, you can check
to register your favorite theater so that you
Select the
for any movies that are currently popular.
button to the right of a
Select the
can always check it again using the
“Favorite Theaters” menu and selecting
button to view the current movie
the
movie title to view the plot summary and
any other detailed information.
06
information for that theater.
SiriusXM™ Data I 6-9
MEMO
part.8
Other Features
Climate Mode
Camera
Other Features
Climate Mode
Name
Set the temperature
of the driver's seat
and passenger
seats
Displays the configured temperature settings for the driver's seat and the passenger
seats. Cooling or heating will continue until
the temperature matches the configured
temperature settings.
The internal temperaure can be controlled in incrments of 1°F within a range
of 63°F to 89°F.
LOW is displayed when the temperature
is set to anything below 63°F, and HIGH
is displayed when it is set to anything
above 89°F.
Air direction
Displays the configured air direction settings.
Air volume
Displays the configured air volume settings
Cooling/heating
control status
(AUTO)
Displayed when the AUTO key is pressed
and cooling/heating operates automatically
according to the configured temperature
settings.
AUTO will be turned off when you try to
do the following with AUTO on:
- Control the air volume
- Control the air direction
- Turn the air conditioning (A/C) on/off
- Turn on the moisture removal function
for the windshield
Air conditioning
control status
Displayed when the A/C key is pressed
and the air conditioning starts cooling/heating.
Operating Climate Mode
Press the
CLIMATE
key for the climate system to see status infor-
mation in the full screen display.
While multimedia or navigation is in use, the climate system information will be displayed over top when you control the temperature (TEMP) or turn on the air conditioner (A/C).
Basic Mode Screen
7-2 I Other Features
Description
Simultaneous temperature settings for
the driver's seat and
the passenger seats
(SYNC)
Description
Displayed when the SYNC key is pressed
and the temperatures of the driver's seat
and the passenger seats can be configured at the same time.
07
Name
Climate Mode I 7-3
Camera
Steering-linked camera
• This device is connected to a rear
WARNING
- Backing Up & Using Camera
• Never rely solely on the rear view camera
when backing up. Prior to entering your
vehicle always do a visual check of the area
behind your vehicle, and before backing up be
aware of your surroundings and supplement
the rear view camera by looking over your
shoulders and checking your rear view mirrors. Due to the difficulty of ensuring that the
area behind you remains clear, always back
up slowly and stop immediately if you even
suspect that a person, and especially a child,
might be behind you.
i Information
• A separate chipset is used for the camera
screen while booting up, so it may be different
after booting up.
7-4 I Other Features
detection camera to see behind the car
for safe reversing.
• The Rear View Camera turns on automatically if you shift the gear to R when
the power is on or the engine has
started.
• While the device boots up, shift the gear to
"R" to activate the rear detection cameras.
Name
Red Line
About 0.5 m from the
rear bumper
Yellow Line 1
About 1 m from the
rear bumper
Yellow Line 2
About 3 m from the
rear bumper
Yellow Line 3
Trajectory of the wheel
on the driver’s side
Yellow Line 4
Trajectory of the wheel
on the passenger side
Blue Line
Neutral steering trajectory
Shift the gear to another position to deactivate the rear detection camera.
NOTICE
• A wide-angle lens is installed as the rear
detection camera to get a wider view, so
there may be some difference between the
actual distance and the distance that appears.
on-screen. For safety, make sure to view
the back, right, and left sides of the car for
yourself.
• The color of the parking guidelines displayed
in the picture may differ from the actual
screen.
• When booted up, blinking may occur when
you switch to a UI screen.
Description
As you reverse your car and monitor the
area behind your car, the steering-linked
driving trajectory and the neutral driving
trajectory are both displayed.
part.9
Setup
Setup
Sound Settings
Display Settings
Bluetooth Settings
UVO eServices Settings
Home Screen Settings
Clock Settings
Voice Recognition Settings
Language Settings
Keyboard Settings Screen
Saver Settings System Info
Setup
Setup
Setup is the screen to control Audio system settings.
To enter the screen, press the
key or the
Setup
SETUP
icon in All Menus.
Features
8-2 I Setup
Description
Sound
Provides the sound control options for Position,
Bass, Mid, Treble, Volume
and Advanced settings.
Display
Provides the Mode/
Illumination settings.
Bluetooth
Provides the Bluetooth
Connection/Auto
Connection Priority/
Bluetooth System
Information settings.
UVO
eServices
Provides the 911
Connect/Parking Minder/
My Car Zone/Scheduled
Diagnostics/Trip Info
Sync Reminder Settings.
Phone
projection
For more details, refer to
Phone projection guide.
Home
Screen
Provides the function
to customize the three
menu items at the bottom
of the Home Screen.
Features
Description
Clock
Provides the Time and
View settings.
Voice
Recognition
Provides the Guidance
and Priority settings.
Language
Provides the Change
Language settings.
Keyboard
Provides settings to
switch keyboard layouts.
Screen
Saver
Provides the Clock/
None settings.
System Info
Provides software and
storage space information.
Display Off
Provides the Display Off
(touch activation) function.
Sound Settings
Features
Advanced
Select additional audio
options such as “Speed
Dependent Volume
Control” that automatically
controls Audio volume
according to vehicle speed
as well as “Variable EQ”.
Default
Resets the sound to factory default settings.
Beep
Select to activate a beep
when pressing buttons.
Adjusts the sound effects for the whole
system.
Description
Display Settings
Adjusts the level of illumination for the
entire system.
i Information
Description
Position
Select the Up/Down/Left/
Right button to control
sound positioning.
Select Center to concentrate the sound on the
center of vehicle.
Tone
Drag the slide bar to
control bass/mid/treble
settings.
Select Center to initialize
the settings.
Features
Description
Mode
Select any of LCD illumination change modes:
Automatic (changes
the level automatically),
Daylight, and Night.
Illumination
Set the levels of illumination for day and night.
Select Default to initialize
the settings.
Default
Resets the display to factory default settings
Display Off
Provides the Display Off
(touch activation) function.
Setup I 8-3
08
Features
• Advanced sound settings may differ according
to selected AMP option.
• The seat shape may differ according to
vehicle model.
Bluetooth Settings
Bluetooth Connection Settings
Press the
Changes Bluetooth phone settings.
▶ Select
SETUP
key ▶ Select
Bluetooth Connection .
Features
Paired Device
List
Displays the paired
Bluetooth device list.
When selecting from
the list, the device is
connected or disconnected.
Bluetooth
Audio
Connection
Status
An icon appears when
you make a Bluetooth
Audio connection.
Bluetooth
Hands-Free
Connection
Status
An icon appears when
you make a Bluetooth
Hands-free connection.
Add New
Register a new
Bluetooth device.
Delete Devices
Select and delete a
paired device.
Help
Switches to the
Bluetooth Connection
Help screen.
Bluetooth
Bluetooth Settings
Press the
icon.
8-4 I Setup
SETUP
key ▶ Select
Bluetooth
Description
Auto Connection Priority
Press the
▶ Select
SETUP
key ▶ Select
Auto Connection Priority
Bluetooth
When the engine is running, the selected
Bluetooth device is automatically connected. If you fail to connect the selected
Bluetooth System Information
Press the
▶ Select
SETUP
Bluetooth
Features
Description
Vehicle
Name
You can change the
Bluetooth device name of
the vehicle.
Passkey
You can change the passkey used for Bluetooth
device authentication. the
initial passkey is 0000.
device, the previously-connected device is
automatically connected, and if it also fails,
then it tries to connect all paired devices
key ▶ Select
Bluetooth System Info
sequentially.
Depending on auto connection priority,
connection to a device may take time.
i Information
• The vehicle name above is an example.
Check the actual information on the product.
Setup I 8-5
08
i Information
• Up to 5 Bluetooth devices can be paired.
• Only one Bluetooth device can be connected
at a time.
• During a Bluetooth device connection, another
device cannot be paired.
• When you delete a paired device, the Call
History and Contacts stored in the head unit
are also deleted.
• Bluetooth Hands-free and Bluetooth Audio
functions are supported.
• Hands-free and audio-supported devices,
such as a Bluetooth smartphone or audio, will
function normally.
• When a Bluetooth device is connected, if
the Bluetooth connection is unexpectedly
disconnected, due to being out of
communication range, the device powering
off, or a Bluetooth communication error, the
Bluetooth device automatically searches for
and connects to nearby Bluetooth devices.
• If the system is not stable, due to a vehicleBluetooth device communication error, restore
the Default Factory Settings.
• For Default Factory Settings, the bluetooth
settings are reset to factory settings.
• Press the SETUP key ▶ Select Bluetooth
▶ Select Default Factory Settings .
Default Factory Settings
UVO eServices Settings
You can delete all paired devices and
This feature is used to turn on or off the
restore the Default Bluetooth Settings. For
Within the eServices Settings screen,
Default Factory Settings, all paired devices
UVO eServices related features can be set,
are deleted, and the system is reset to
such as activating 911 Connect, Parking
factory settings.
Minder and setting the My Car Zone.
For safety reasons, My Car Zone Settings
cannot be adjusted while driving. Park
the vehicle before making any changes to
your settings.
Press the
8-6 I Setup
911 Connect
SETUP
key ▶
UVO eServices
911 Connect feature.
When enabing this feature, you must first
Parking Minder
My Car Zone
agree to the 911 Connect tems of use.
If you want to send vehicle location to your
This feature is used to set My Car Zone
After reading the tems of use, press the
Agree
button on the touch screen to
smartphone automatically when you turn
(Curfew Limit, Speed) alert conditions.
accept.
feature On.
the ignition off, turn the Parking Minder
My Car Zone Settings is unavailable when
UVO eServices has not been activated.
Press the
My Car Zone
SETUP
key ▶
UVO eServices
▶
The PIN must be entered to use My Car
08
Zone Settings.
Setup I 8-7
This screen is used to set Curfew Limit
Curfew Limit Alert Settings
PIN
and Speed Alert features.
Within Curfew Limit Alert Settings, you can
This feature is used to change the PIN to
set the Curfew Limit Alert Start and End
enter My Car Zone Settings.
Set the alert conditions On ▶
Settings
Time. You can also set the Alert Interval of
alerts upon Curfew Limit.
NOTICE
Speed Alert Settings
Within Speed Alert Settings, you can set
the vehicle speed limit and Alert Interval of
alerts upon overspeeding.
8-8 I Setup
• B e fo r e p r e s s i n g Done , e n s u r e yo u r
smartphone is connected to UVO eServices
system via USB cable.
Done
button to transmit the new
PIN to your My UVO com account.
Restore Factory Settings
Scheduled Diagnostics
This feature is used to restore all My Car
This feature is for setting when scheduled
Zone alert history and settings back to
diagnostics alerts display.
default state.
Press
SETUP
key ▶
UVO eServices
the Scheduled Diagnostics On ▶
▶ Set
Settings
NOTICE
• For months without the corresponding day,
the last day of the month will automatically be
set as the scheduled diagnostics date.
08
Press the
Setup I 8-9
Home Screen Settings
Trip Info Sync Reminder
Trip Info is a feature used to set whether
system displays alert when trip info(Driv-
You can customize the three menu items
ing Distance, Driving Speed, Driving Time,
at the bottom right of the Home Screen
etc). reaches 90% of memory.
into the ones you want.
UVO eServices must be activated to use
On the Home Screen Settings screen,
this feature.
drag the menu items on the right to the
area marked in red in the screen below.
Press
SETUP
key ▶
UVO eServices
▶
Set Trip Info Sync Reminder On
i Information
• You can select the Default button to reset
to the factory default settings.
8-10 I Setup
Clock Settings
Voice Recognition
Settings
Configure the settings for time and date.
Using the arrow buttons, you can change
Configure how to make a call with
the values. Clock settings do not automat-
Voice Recognition Guidance and Voice
ically change when crossing into different
Recognition.
time zones. The time must be changed
manually on this screen.
Features
Beginner
Normal
For normal users, the
voice recognition system
provides simple and short
voice guidances.
Description
Daylight
Saving Time
The daylight saving
time (DST) is applied.
24 Hours
The time display is set
in 24-hour format.
Direct entry
If you tap any value,
you can directly enter
the number in the following screen.
08
Features
Description
For beginners, the voice
recognition system provides voice prompts.
Setup I 8-11
Language Settings
Keyboard Settings
Screen Saver Settings
You can configure the displayed system
You can configure the keyboard layout for
You can select any of the following screen
language.
each language.
formats to be displayed when the screen
or power is turned off (Press and hold the
Power button).
• Digital clock and date
• Analog clock and date
• None
When the language is changed, the sys-
You can configure ABCD or QWERTY
tem language is automatically changed.
keyboards for the system.
Unique data including MP3 file name is
not changed and voice recognition does
not support some languages.
8-12 I Setup
i Information
• Configured keyboard layouts are applied
to all input modes.
System Info
System Update
At the System Info screen, insert the USB
At the System Info screen, software ver-
memory with the latest file downloaded,
sion information, updates, and storage
and then select the
status details are available.
updating. The system will then reboot
Update
button to begin
automatically.
i Information
• This product needs supplemented software
updates and additional functions, which
collectively may take some time to complete,
depending on the amount of data.
Description
SW Info
System version information and update details
are available.
Select the Update button
to update the system.
After update is complete,
the system will reboot
automatically.
Storage
Displays the memory
space available for media
storage.
CAUTION
• If the power is disconnected or the USB is
removed during an update, the data might be
damaged. Please do not turn off the vehicle
while an update is in progress.
08
Features
Setup I 8-13
MEMO
part.10
Appendix
Product Specification
Troubleshooting
FAQ
Appendix
Product Specification
Common
Name
Car TFT LCD Display Audio Unit
Power Supply
DC 14.4 V
Operating
Power
DC 9 V ~ DC 16 V
TFT-LCD
Screen Size
7 inch(152.4 X 91.44 mm)
Resolution
384000 pixels (Resolution: 800 x 480)
Operating
Method
Current
Consumption
2.5 A
TFT(Thin Film Transistor) Active Matrix
Sleep
Current
1 mA
(Head Unit Only)
Viewing Angle
Left/Right, Top/Bottom: ALL 89°
Operating
Temperature
-20 ~ +70 °C
(-4 ~ +158 °F)
Storage
Temperature
-30 ~ +80 °C
(-22 ~ +176 °F)
Internal Lighting
LED
Dimensions
178 X 140.2 X 60 mm (Main BOX)
Weight
1.940 kg
Radio
Channels
FM: 87.5 MHz ~ 107.9 MHz(Step: 200 kHz)
AM: 530 kHz ~ 1710 kHz(Step: 10 kHz)
Sensitivity
FM: Under 10 dBu/AM: Under 35 dBu
Distortion Factor
Within 2 %
9-2 I Appendix
Bluetooth® Wireless Technology
Supported
Bluetooth®
Specification
Frequency
Range
2402 ~ 2480 MHz
Supported
Profile
Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0)
Output
-3~0 dBm (Power Class2, Conducted)
Number of
Channels
79 channels
4.1
CAUTION
09
• The producer and installer cannot provide services related to life safety
as the concerned radio equipment is liable to radio interference.
Appendix I 9-3
Troubleshooting
1. Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual device.
Problem
Possible Cause
Sound does not work in
AUX mode
• Are the audio connector jacks fully
inserted into the AUX terminal?
The external device is
not working
• Is the external device connected with a
standard connector cable?
Upon turning power on,
the most recent mode
screen is not displayed
Within modes that play files by reading
external sources, such as USB, iPod, or
®
Bluetooth streaming mode, the most
recently played mode screen prior to turning off power may not properly load
• If the corresponding device is not connected, the mode operated prior to the
most recent mode will operate
• If the previous mode still cannot be
properly played, the mode operated
prior to that will operate
2. If you are having problems with the device, try the suggestions
listed below.
3. If the problems persist, contact your Kia dealer.
Problem
Possible Cause
There are small red,
blue, or green dots on
the screen
• Because the LCD is manufactured with
technology requiring high point density,
a pixel or lighting deficiency may occur
within 0.01% of total pixels
The sound or image is
not working
• Has the Switch for the vehicle been
turned to [ACC] or [ON]?
• Has the SYSTEM been turned OFF?
The screen is being
displayed but sound is
not working
• Has the volume been set to a low level?
• Has the volume been muted?
When the power is
turned on, the corners
of the screen are dark
• The display appearing somewhat dark
after prolonged periods of use is normal
with LCD panels. It is not a malfunction
• If the screen is very dark, contact your
nearest Kia dealer for assistance
Sound is working from
only one speaker
• Are the positions of Fader or Balance
sound controls adjusted to only one
side?
9-4 I Appendix
The power
does not
turn on
The system
does not
play
Possible Cause
Countermeasure
Problem
Possible Cause
Countermeasure
The fuse is disconnected
• Replace with a suitable fuse
• If the fuse is disconnected
again, please contact your
point of purchase or Kia
dealer
The image
color/tone
quality is
low
• The brightness,
saturation, hue,
and contrast levels
are not set properly
• Properly adjust the brightness, saturation, hue, and
contrast levels through
Display Setup
Device is not properly
connected
The vehicle battery is
low
• Charge the battery If the
problem persists, contact
your point of purchase or
Kia dealer
• The volume level
is set to the lowest
level
• The connection is
not proper
• Adjust the volume level
• Check to see that the
device has been properly
connected
Sound does
not work
The sound
or image
quality is
low
• The device is
currently fast-forwarding, rewinding,
scanning, or playing in slow mode
• Vibration is occurring from where
the conversion
switch has been
installed
• Image color/tone
quality is low
• Check to see that the
device has been properly
connected
• The sound will not work
when the device is fast-forwarding, rewinding, scanning, or playing in slow
mode
• The sound may be
short-circuited and the
image distorted if the
device vibrates
• The device will return to
normal once vibrations stop
09
Problem
Appendix I 9-5
Problem
The USB
does not
work
9-6 I Appendix
Possible Cause
Countermeasure
• USB memory is
damaged
• Please use the USB after
formatting it.
• USB memory has
been contaminated
• Remove any foreign substances on the contact
surface of the USB memory
and multimedia terminal
• A separately purchased USB HUB
is being used
• Directly connect the USB
memory with the multimedia terminal on the vehicle
• A USB extension
cable is being
used
• Directly connect the USB
memory with the multimedia terminal on the vehicle
• A USB which is
not a Metal Cover
Type USB Memory
is being used
• Use standard USB
Memory
• An HDD type, CF,
SD Memory is
being used
• Use standard USB
Memory
• There are no
music files which
can be played
• Only MP3, WMA file
formats are supported.
Please use only the supported music file formats
Problem
The iPod is
not recognized even
though it
has been
connected
Bluetooth
does not
work or
its limited
functions are
available
Possible Cause
Countermeasure
• There are no titles
which can be
played
• Use iTunes to download
and save MP3 files into the
iPod
• The iPod firmware
version has not
been properly
updated
• Use iTunes to update
the firmware version and
reconnect the iPod with the
device
• The iPod device
does not recognize downloads
• Reset the iPod and reconnect with the device
• Bluetooth on your
mobile phone is
set to OFF
• Set it to ON
• The Bluetooth
connection is not
made
• Make the connection
active
i Information
• While operating the device, if an abnormality occurs that cannot be
corrected with the above described measures, press the RESET key to
reset the system.
• Press and hold the RESET key (more than 1 second). The device power
will turn off and the system will reset.
FAQ
About Pairing Mobile Phones
Q What is a Passkey?
Q I cannot pair my mobile phone. What is the cause?
®
A Check to see that the mobile phone supports Bluetooth func-
A A passkey is the password used to authenticate the connection
tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set
between the head unit and mobile phone. The passkey only
it to ON. If the cell phone still can’t be registered, try again after
needs to be entered once when pairing the mobile phone for
turning Bluetooth off and on, or delete the device registration on
the first time.
the multimedia system and cell phone and then register the cell
The initial passkey is 0000. You can change it with SETUP
Bluetooth ▶ Bluetooth System Info ▶ Passkey menu options.
phone again.
▶
Q What is the difference between pairing a mobile phone and connecting a mobile phone?
A Pairing occurs through authenticating the head unit and mobile
phone. Mobile phones paired to the head unit can be connected
and disconnected until the paired mobile phone is deleted from
®
the system. Bluetooth Handsfree features, such as making/
answering calls or managing contacts, are supported only in
09
mobile phones connected with the head unit.
Appendix I 9-7
About Making/Answering Phone Calls
About Bluetooth ® Wireless Technology/
Head Unit Use Environment
Q How can I answer a call?
A When there is an incoming call, a notification pop-up will
become displayed. To answer the incoming call, select the
Accept
button on the screen or the
A The wireless connection can be used within 15 yards.
key on the steer-
ing wheel control.
Q How many mobile phones can be paired?
To reject the call, select the
press the
Q What is the range of my wireless connection?
Reject
button on the screen or
A It is possible to pair up to five mobile phones.
key on the steering wheel control.
Q Why is call quality sometimes poor?
Q What should I do if I am talking on the Handsfree but want to
switch the call to the mobile phone?
A While on a call, press and hold (more than 0.8 seconds)
the
Use Private
A Check the reception sensitivity of the mobile phone when call
quality becomes worsened. The call quality may deteriorate when
the signal strength is low. Call quality may also worsen if metal
key on the steering wheel control or select the
objects, such as beverage cans, are placed near the mobile
button at the bottom of the Phone screen to switch
phone. Check to see if there are metal objects in the vicinity of
the call to your mobile phone.
the mobile phone. The call sound and quality may differ depending on the type of mobile phone.
9-8 I Appendix
Important Information
Before using your Multimedia system, read and follow all instructions and safety information provided in this end user manual ("User's
Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences.
Keep User's Guide in Vehicle
When kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please
make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions and
safety information carefully.
Warning
Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other
serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a
safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may
09
to distract your attention away from the road and remove your hands from the wheel.
General Operation
Voice Command Control
Functions within the Multimedia system may be accomplished using only voice commands. Using voice commands while driving allows
you to operate the system without removing your hands from the wheel.
Prolonged Views of Screen
Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before
attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous
if your attention has been diverted away from your driving task at a critical time.
Volume Setting
Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while
driving. Driving while unable to hear these sounds could cause an accident.
Use of Speech Recognition Functions
Speech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any
speech recognition functions included in the system and address any errors.
FCC Warning
This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum 20 cm between the radiator and your body.
This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the
FCC.
09
may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : FEEL-6
Create Date                     : 2016:11:16 21:33:51+09:00
Modify Date                     : 2017:10:12 17:06:52+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : FEEL-6
Title                           : 
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:10:12 17:06:52+09:00
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document ID                     : uuid:11f7ba3d-41bb-4dc0-8a00-1b83eeae6646
Instance ID                     : uuid:50274d1c-a888-4676-842d-9ef1f369ab8f
Page Count                      : 88

EXIF Metadata provided by EXIF.tools