HYUNDAI MOBIS AVN-200TFU AVN System User Manual AVN 200TFU IC ATT C E G H I
HYUNDAI MOBIS CO., LTD. AVN System AVN 200TFU IC ATT C E G H I
Contents
user manual 1 of 7
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1264553 |
| Application ID | nEQCmEjPK8TIUJvGiTtbug== |
| Document Description | user manual 1 of 7 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 204.11kB (2551346 bits) |
| Date Submitted | 2010-04-09 00:00:00 |
| Date Available | 2010-05-24 00:00:00 |
| Creation Date | 2010-04-09 14:41:21 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2010-04-09 14:41:40 |
| Document Title | Microsoft Word - AVN-200TFU_IC_ATT.C,E,G,H,I.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | C1F6B8EDC8AD |
FCC ID: TQ8-AVN-200TFU/ IC: 5074A-AVN200TFCA ATTACHMENT E. - User Manual - HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCTR1004FR11 1/1 Preface Thank you for purchasing this Audio Navigation System. This user manual explains how to use the KIA Motor Audio Navigation System. Before using the product, read the contents of this user's manual carefully and use the product safely. iPod iPod is a registered trademark of Apple, Inc. Bluetooth Bluetooth is a trademark owned by Bluetooth SIG, Inc. The screens shown in this manual may differ with the actual screens of the product. The design and specification of this product may change without prior notification for product improvement. When transferring the vehicle to another individual, include this user's manual so that the next driver can continue its use. Copyright(c) 2009 by NAVTEQ. All Map Database cannot be copied without permission. This is protected by U.S. copyright laws. All rights not expressly granted are reserved. You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent. Tables of contents PART 1 PRE-OVERVIEW Introduction PART 2 AUDIO SYSTEM 1-2 Important information about this manual 1-2 Precaution for safe usage 1-2 PART 3 NAVIGATION SYSTEM Operating the radio 2-2 FM/AM Radio 2-2 SIRIUS Radio 2-6 Operating the CDP 2-11 Controller and functions 1-3 About CDP 2-11 Control panel 1-3 Inserting/Ejecting Disc 2-14 Steering wheel remote controller 1-6 CD 2-15 MP3 2-18 Basic operation and setting 1-7 Turning the power ON 1-7 Operating the external devices Turning the power OFF 1-7 iPod 2-23 Turning the audio ON/OFF 1-7 USB 2-28 Adjusting audio volume 1-7 AUX 2-31 How to operate the screen menu 1-8 How to operate menu by voice command 1-10 Audio sound setting Display setting 1-11 1-12 2-23 Limitations of the navigation system 3-2 GPS signal reception state Vehicle position display Route guidance Route Re-calculation 3-2 3-3 3-4 3-4 Starting navigation system 3-5 Map Functions 3-5 Current position map screen (without route) 3-5 Switching map mode (North up/Heading up) Viewing GPS signal state Changing the map scale 3-6 3-7 3-8 Displaying / Hiding POI icons on the map Displaying / Hiding Q.POI icons 3-9 3-9 Displaying /Hiding icons other than 3-9 Q.POI icons 3-10 Making a call to POI 3-11 Scrolling map Tables of contents Setting a Destination Destination menu screen and functions Searching a Destination Searching an Address Searching a Previous Destination Searching an Intersection Searching a POI Searching from Address book Searching for Emergency facilities Searching your Home Searching favorite places Searching from MAP Searching POI by local POI list Operating after searching a destination Changing destination position Setting as Destination/waypoint Adding to address book Operating after setting a destination Starting Route Guidance Route guidance screen Selecting other route 3-12 3-12 3-13 3-13 3-17 3-17 3-20 3-24 3-25 3-25 3-26 3-26 3-26 Route guidance 3-30 Finishing route guidance (Delete Destination) Route overview(View Entire Route) Changing Route option Editing waypoints Adding waypoints Deleting waypoints Re-ordering waypoints Setting detour distance Setting avoid streets on route 3-30 3-31 3-32 3-32 3-32 3-34 3-34 3-35 3-35 Setup and Information 3-27 3-27 3-27 3-27 3-28 3-28 3-28 3-29 3-30 Route menu screen and functions Setup menu screen and functions Main setting 3-36 3-36 3-36 Setting keyboard for inputting letter 3-36 Setting voice command feedback ON/OFF Setting Language Initializing system Navigation setting Setting units (mile/km) 3-37 3-37 3-37 3-38 3-38 Setting arrival time and distance display 3-38 Registering avoid area Editing avoid area Deleting avoid area Deleting all avoid areas Setting Q.POI icons Setting estimate travel time My places setting 3-38 3-40 3-41 3-41 3-42 3-42 3-43 Registering new address in address book 3-43 Editing an address of address book 3-45 Deleting an address of address book Deleting an address book Registering home address Deleting home address Registering favorite place Deleting favorite place System information and update Voice guidance volume setting Voice guidance volume control Adaptive volume control ON/OFF Traffic Setup Traffic Information Help 3-46 3-47 3-48 3-48 3-49 3-50 3-51 3-51 3-51 3-52 3-52 3-52 3-54 Operating voice command 4-2 Condition for voice command system 4-2 PART 5 BLUETOOTH HANDSFREE Before using the Bluetooth Handsfree What is Bluetooth? Basic operation for voice command control 4-2 Voice command help 4-3 Functions supported by Bluetooth Handsfree 5-2 5-2 5-2 Converting Bluetooth Handsfree mode Setting voice Prompt ON/OFF 4-4 Speaker adaptation 4-4 Converting from AV/Navigation mode to Bluetooth Handsfree mode 5-2 Voice command list 4-6 Converting from Bluetooth Handsfree mode to AV/Navigation mode 5-3 Command list of Help 4-6 Command list of Audio system 4-7 Command list of Navigation system 4-13 4-19 5-9 Bluetooth Handsfree screen and functions 5-9 When there is no mobile phone connected When a mobile phone is connected Setting up the voice command system 4-4 Searching a destination by voice command Bluetooth Handsfree screen layout 5-9 5-9 When receiving an incoming call 5-10 When already on a call 5-10 When there is a call waiting 5-10 5-2 Making a call 5-11 Making a call by dialing a phone number 5-11 Making a call from Speed Dial 5-11 Making a call by redialing 5-12 Pairing and connecting a Bluetooth phone 5-4 Answering a call Pairing a mobile phone 5-4 Answering an incoming call 5-13 Deleting a paired phone 5-6 Rejecting an incoming call 5-13 Connecting a mobile phone 5-7 Disconnecting a mobile phone 5-8 5-13 Operating menus during a call 5-14 Switching call to the mobile phone 5-14 Activating Call waiting 5-14 Ending a call 5-15 PRE-OVERVIEW PART 4 VOICE COMMAND SYSTEM Tables of contents Phone Book 5-16 Changing passkey 5-28 DVD 6-15 AUX (auxiliary device input) 6-19 Making a call from the Phone book 5-16 Deleting all paired phones 5-28 Searching the Phone Book 5-17 Initializing Bluetooth handsfree 5-29 Searching by name 5-17 Searching by number 5-18 Important information About pairing mobile phones Call History List 5-19 Making a call from Call history 5-19 Sorting call history 5-19 5-30 5-30 About making/answering phone calls 5-31 About Bluetooth device environment 5-31 Phone Music 5-21 Before playing Phone Music 5-21 Starting Phone Music 5-21 Phone Music screen layout 5-22 Selecting Phone Music files 5-23 Bluetooth settings 5-24 Pairing and connecting a mobile phone 5-24 Setting mobile phone auto connect priority 5-24 Setting Handsfree volume 5-25 Setting Audio streaming Advanced settings Searching and modifying my device properties PART 6 REAR SEAT ENTERTAINMENT SYSTEM (RSE) REAR SEAT ENTERTAINMENT SYSTEM (RSE) (IF EQUIPPED) 6-2 Important Safety Information 6-2 Product Characteristics 6-3 Name and function of system parts 6-4 Operating the Rear (RSE) System 6-7 5-26 DVDP/AUX 6-9 5-26 CD 5-27 PART 7 APPENDIX 6-9 MP3 6-11 VCD 6-13 Troubleshooting guide 7-2 Before thinking the product has malfunctioned Troubleshooting 7-2 7-3 DVD region code and language 7-6 code Region code Language code 7-6 7-7 Map legend 7-8 Road color POI icons Landmark icons 7-8 7-9 7-11 INDEX 7-12 RSE Connector Pin Layoutout 7-17 PART 1 PRE-OVERVIEW Introduction 1-2 Important information about this manual Precaution for safe usage How to operate a menu by voice command 1-10 1-2 1-2 Controller and functions 1-3 Control panel Steering wheel remote controller 1-3 1-6 Basic operation and setting 1-7 Turning the power ON Turning the power OFF Turning the audio ON/OFF Adjusting audio volume How to operate the screen menu Operating typical screen menu 1-7 1-7 1-7 1-8 1-8 1-8 Condition for voice recognition system Giving voice command Audio sound setting FAD/BAL BASS/MID/TREB Auto volume control ON/OFF Touch screen beep ON/OFF Display setting Display mode Brightness Display OFF Display ON 1-10 1-10 1-11 1-11 1-11 1-11 1-11 1-12 1-12 1-12 1-12 1-12 Inputting letters by using screen keyboard Displaying the list Selecting an item in a list Sorting items from the list 1-8 1-9 1-9 1-9 PRE-OVERVIEW 1-1 PRE-OVERVIEW PART 1 PRE-OVERVIEW PART 1 PRE-OVERVIEW Introduction Precaution for safe usage In case of product malfunction, please contact your place of purchase or service cen- Important information about this manual WARNING ! ter. Do not operate the Audio/Video Navigation When cleaning the touch screen, make sure to This user manual contains instructions relat- system while driving. turn off the device and use a dry and smooth ed to safety. Closely observe and comply Do not disassemble, assemble, or modify the cloth. Never use tough materials, chemical with all of the safety instructions found Audio/Video Navigation system. cloths, or solvents (alcohol, ammonia, ben- within this manual. Do not watch the screen for prolonged peri- zene, thinners, etc.) as such materials may ods of time while driving. damage the device panel or cause color and Set the volume to a level which allows the quality deterioration. WARNING ! Disobeying the warnings listed within this driver to be aware of external conditions. Reference Page user's manual may cause fatal or serious injuries. Warnings indicate matters which may directly lead to accidents. CAUTION! Do not operate the Audio/Video Navigation This indicates the title and page that you should refer to. system for prolonged periods of time with CAUTION! the vehicle ignition in ACC. Such operations Disobeying the cautions listed within this user may lead to battery discharge. manual may lead to accidents or cause injury. Be cautious not to spill water or introduce Cautions indicate matters which may lead to foreign objects into the device. vehicle damage or malfunction. Do not cause severe shock to the device. This indicates an operation by voice com- Direct pressure onto the front side of the mand. INFORMATION Information which the user must be aware or allows for more convenient use of the device. 1-2 PRE-OVERVIEW monitor may cause damage to the LCD or touch panel. This indicates a button on the control panel. Voice Command Controller and functions 1 Power / Volume control knob power off. Push knob (under 0.8 second) : Each time the knob is pressed, the Audio is turned 12 13 on and off. Tune knob : The range of volume adjustment is between 0 ~ 35. 2 FM/AM button Each press will change the bands in the following order: FM1 → FM2 → AM → FM1 3 SAT button Each press will change the bands in the following order : SIRIUS1 → SIRIUS2 → SIRIUS3 → SIRIUS1 4 CD/AUX button Each press will change the bands in the 10 14 following order : DISC(CD, MP3) → (USB or iPod) → (AUX) → DISC(CD, MP3) 11 PRE-OVERVIEW 1-3 PRE-OVERVIEW Push knob (over 0.8 second) : Turns the Control panel PART 1 PRE-OVERVIEW SEEK/TRACK Up/Down button SHORT KEY(less than 0.8 second) - iPod Mode : REW/FF the current playing song. DEST button Displays the Destination menu screen. - FM/AM Mode : Automatically searches for the previous or next broadcast frequency and starts playing. - SAT Mode : Receives the previous or next channel. - CD Mode : Plays the previous or next track. - MP3, USB Mode : Plays the previous or next file. - iPod Mode : Plays the previous or next song. LONG KEY(over 0.8 second) - FM/AM Mode : Quickly moves through the frequencies while the button is TUNE knob - FM/AM Mode : Turn the knob to search for the desired frequency. Press the knob to receive the selected frequency. - SAT Mode : Turn the knob to search for receive the selected channel. - CD Mode : Turn the knob to search for the desired track. Press the knob to play the selected track. - MP3, USB Mode : Turn the knob to search for the desired file. Press the knob to play the selected file. - iPod Mode : Turn the knob to search for searches for broadcasts which can be the desired song. Press the knob to play received. the selected song. - SAT Mode : Quickly moves to the - CD Mode : REW/FF the current playing track. - MP3, USB Mode : REW/FF the current playing file. 1-4 PRE-OVERVIEW SETUP button Displays the Setup menu screen. the desired channel. Press the knob to pressed. Once released, automatically previous or next channel. ROUTE button Displays the Route menu screen. MAP button Displays the map screen for the current position. DISC Eject button Eject the inserted disc. DISC insert indicator LED PRE-OVERVIEW Displays that a DISC has been inserted. RESET button Resets the system - if software locks-up. PHONE button Displays the Bluetooth handsfree screen. INFORMATION If pressing the power off knob for over 0.8 second and the system does not shut down, carefully use a straightened paper clip at the access hole shown next to the right DISC indicator LED to reset the software. The system power will shut-off and restart. PRE-OVERVIEW 1-5 PART 1 PRE-OVERVIEW Steering wheel remote controller and automatically switch to the next mode. Press this button for over 0.8 second to turn the Audio ON and OFF. Press this button when the Power is turned off to turn the power on. - CD Mode : REW/FF the current playing track. - MP3, USB Mode : REW/FF the current playing file. - iPod Mode : REW/FF the current playing song. Seek Up/ Down SHORT KEY(less than 0.8 second) - FM/AM : Receives the previous or next preset frequency. Volume Up/Down Increases or decreases the speaker volume within a range between 0 ~ 35. - SIRIUS Mode : Receives the previous or next preset channel. - CD Mode : Plays the previous or next track. Voice Recognition button Starts Voice Recognition. - MP3, USB Mode : Plays the previous or next file. - iPod Mode : Plays the previous or next song. Mode mode will convert in the following order: LONG KEY(Over 0.8 second) FM1 - FM/AM Mode : Quickly moves through the SIRIUS3 AM (DISC) (Phone Music) SIRIUS1 (USB or iPod) SIRIUS2 (AUX) (FM1). If a not supported DISC has been inserted or if the corresponding unit has not been connected, the mode will not be recognized 1-6 PRE-OVERVIEW pressed while in AV/Navigation mode, the Bluetooth handsfree screen will be displayed. Each time the mode button is pressed, the FM2 CALL Press this key to receive an incoming call. If END frequencies while the button is pressed. Press this key to reject an incoming call. Once released, it automatically searches If pressed while on a call, then the call will be for broadcasts which can be received. ended. - SIRIUS Mode : Quickly moves to the previous or next channel. Basic operation and setting Turning the power OFF Turning the power ON second, a beep will sound and the system power will be turned off. Turn the ignition key onto ACC or ON. If the Turning the audio ON/OFF system power had been on when the Press the PWR/VOL knob for under 0.8 ignition was turned off, the system will turn back on automatically. second with the system power on to turn the INFORMATION If the system power had been off when the As system booting starts from the point the ignition was turned off, the system will door lock is unlocked, the device may remain off. In this case, press the PWR/VOL knob to complete booting before the ACC is turned on or the PWR/VOL knob is pressed. Audio on and off. Voice Command 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. turn on the system power. Once system booting is complete, the most recent operated mode will be displayed. "Audio On" "Audio Off" For example, turning on the system will display FM1 radio mode if the last operated mode prior to turning off the system had been FM1 radio mode. PRE-OVERVIEW 1-7 PRE-OVERVIEW If the PWR/VOL knob is pressed for over 0.8 PART 1 PRE-OVERVIEW INFORMATION How to operate the screen menu Conducting the following operations while the AUDIO is off will automatically turn on the Inputting letters by using screen keyboard Operating typical screen menu Audio system. Pressing the audio related buttons ( FM/AM , SAT , CD/AUX ). If a menu button on the screen is pressed, Inserting a DISC or connecting an external different functions depending on the length device. of time the button is pressed (under 0.8 the corresponding function will be operated. The same menu button may perform seconds or over 0.8 second). Adjusting audio volume For more information, refer to the specific Turn the PWR/VOL knob in clockwise direction function within this user manual. to increase the volume and counter-clockwise The current operated button will be to decrease the volume. highlighted upon display. Buttons which cannot be operated under INFORMATION disabled state. Pressing a disabled button between 0 ~ 35. will not perform any operation. made while the AUDIO is turned off. : Displays the French alphabet keypad. (if available) : Displays the number and symbol 0-9 the current conditions will be displayed in The range of volume adjustment is Adjustments to the volume cannot be : Displays the English alphabet keypad. ABC Delete keypad. : Deletes the previous inputted letter. Pressing for over 0.8 second will delete all content. : The input is completed. : Restores to previous screen. List The inputted text will not be saved. 1-8 PRE-OVERVIEW Displaying the list Selecting an item in a list Sorting items from the list PRE-OVERVIEW List : Even if input is not completed, the current matching items from the database will be displayed. : Moves to the next page or previous Select the desired sorting method to page. : The reorganize the list in accordance to the button will be displayed if selected method. the text is too long to be displayed INFORMATION The number at the upper-right side of the screen displays the number of current matches. in one button. Press the button to move the cursor to the end of the text. Press the button to move the cursor to the front of the text. PRE-OVERVIEW 1-9 PART 1 PRE-OVERVIEW How to operate menu by voice command Giving voice command INFORMATION Press the shortly to input the desired voice command. The system voice instruction Condition for voice recognition system comment will immediately terminate. When the icon changes into the icon Most of the functions within the AV and with a beep sound, it is possible to input voice Navigation system can be operated by commands. voice. Please follow the instructions below for optimal voice recognition performance. Press the button on the steering Close all windows and sunroof. wheel remote controller. The performance of the voice recognition A voice command window will be can be improved in quiet environment. displayed on the lower side of the screen Press the voice recognition button and followed by a "Command please" voice comment. say the desired voice command after the sound of the beep. The microphone is positioned above the driver so that voice commands can be Once the icon changes into the icon on the pop-up screen with a said while maintaining a proper posture. beep sound, say the desired voice Pronounce the voice commands command. naturally and clearly as if in normal [Voice command list], page 4-6. conversation. [Searching a destination by voice command], page 4-20. 1-10 PRE-OVERVIEW Audio sound setting Auto volume control ON/OFF button on the main screen Each time the Auto volume control button is of each AV mode (FM/AM, SIRIUS, CD, MP3, pressed, the Auto volume control function is USB, iPod, and AUX) to display the Audio turned on or off. PRE-OVERVIEW Press the Sound sound setup screen. INFORMATION The Auto volume control is a function which automatically adjusts the volume level in accordance to changes in vehicle speed. Touch screen Beep ON/OFF Each time the Touch screen beep button is pressed, the beeping sound that follows each press on the screen will turn on or off. FAD/BAL The position of the sound can be adjusted by using the up-down and left-right ( ) buttons on the left side of the screen. Press the Default button to position the sound in the center of the vehicle. BASS/MID/TREB The BASS/MID/TREB can be adjusted by using the left/right buttons ( ) of each control. PRE-OVERVIEW 1-11 PART 1 PRE-OVERVIEW Display setting Press the SETUP button on the control panel to display the Setup menu screen. Display mode Display OFF Press the button for the desired display mode from Automatic , Daylight , and Night modes. The current selected mode is highlighted. Press the Display off button. Display ON Press anywhere on the black screen. The screen prior to display setting will be Automatic displayed. The display is automatically converted between Daylight and Night modes in accordance to the on/off state of the vehicle taillights. Press Display button to display the Display Setup screen. Daylight The bright screen is always maintained regardless of the on/off state of the vehicle taillights. Night The dark screen is always maintained regardless of the on/off state of the vehicle taillights. Brightness Use the left/right buttons ( control to make adjustments. 1-12 PRE-OVERVIEW ) for MEMO PRE-OVERVIEW PART 2 AUDIO SYSTEM PART 2 AUDIO SYSTEM Operating the radio 2-2 Operating the CDP FM/AM Radio Listening to the FM/AM radio FM/AM screen and functions 2-2 2-2 2-2 Selecting FM/AM broadcast frequency Storing FM/AM presets 2-4 2-5 Scanning FM/AM broadcast frequency SIRIUS Radio Listening to the SIRIUS radio SIRIUS screen and functions 2-5 2-6 2-6 2-6 About CDP Precautions upon handling discs For safe and efficient operation Supported disc formats Disc/Content format compatibility Inserting/Ejecting disc CD Listening to CD music CD screen and functions Selecting the CD track REW/FF CD track 2-11 2-11 2-11 2-12 2-13 2-14 2-15 2-15 2-15 2-16 2-16 Switching the SIRIUS modes (Channel/Category) 2-7 Setting Random function for CD music 2-16 Selecting SIRIUS broadcast 2-7 channel 2-9 Storing SIRIUS presets Scanning SIRIUS broadcast channel 2-10 Browsing detailed information about the SIRIUS channel 2-10 Setting Repeat function for CD music Scanning CD track MP3 MP3 disc related information and precaution Listening to MP3 music MP3 screen and functions Selecting the MP3 file 2-11 2-17 2-17 2-18 2-18 2-19 2-19 2-20 REW/FF MP3 file 2-21 Browsing detailed information about the MP3 file 2-21 Setting Random function for MP3 file 2-21 Setting Repeat function for MP3 file Scanning MP3 file 2-22 2-22 PART 2 AUDIO SYSTEM 2-23 iPod Connecting iPod devices Listening to music from iPod iPod screen and functions Selecting music from iPod REW/FF iPod music 2-23 2-23 2-23 2-24 2-25 2-26 Setting Random function for iPod music 2-26 Setting Repeat function for iPod music 2-27 Browsing detailed information about the iPod music 2-27 USB USB MP3 related information and precaution Precautions upon handling USB Connecting the USB devices Listening to USB music AUX Connecting AUX Playing AUX AUX screen AUDIO SYSTEM Operating the external devices 2-31 2-31 2-31 2-32 2-28 2-28 2-28 2-30 2-30 AUDIO SYSTEM 2-1 PART 2 AUDIO SYSTEM Operating the radio Voice Command 1. Press the FM/AM Radio FM/AM screen and functions button on the steering wheel remote controller. 2. After the beep sound, say a command. Listening to the FM/AM radio " Radio" "(Radio) AM" "(Radio) FM" "FM <1 or 2>" "AM Frequency <530 to 1710>" "FM Frequency <87.5 to 107.9>" "AM Preset <1 to 6>" "FM <1 or 2> Preset <1 to 6>" Press the FM/AM button on the control panel. The FM/AM radio band of the most recent listened station will be displayed. Press the FM/AM button to change the desired radio band. Each press will Mode display : Displays the FM1/FM2/ change the bands in the following order: AM modes. FM1 SEEK/SCAN/PRESET SCAN : If SEEK/SCAN FM2 AM FM1 Select the desired broadcast frequency. [Selecting FM/AM broadcast frequency], /PRESET SCAN is operating, the switch is page 2-5. Frequency : Displays the current playing displayed. frequency. 2-2 AUDIO SYSTEM STEREO indicator : If the current LONG KEY(over 0.8 second) frequency is a stereo broadcast, the - The frequency is rapidly increased or INFORMATION If the R.Text is on OFF state, text will not be decreased by 1-step increments (FM : displayed even if there is text being Program Service name: Displays the 0.2MHz, AM : 10kHz) and stops operation program service name if data is being upon KEY RELEASE. transmitted from the broadcast station. If the R.Text is on ON state, the frequency bar will not be displayed. Even if the broadcasted. SEEK Up/Down button Program Type name: Displays the R.Text is on ON state, text may not be displayed if program type name if data is being SHORT KEY(less than 0.8 second) text is not being received from the broadcast broadcasted. - Automatically searches for the previous station. Frequency bar : Displays the position of the current frequency within the total or next broadcast frequency and starts Scan playing. button : Scans all frequencies or frequency range. LONG KEY(over 0.8 second) just the preset frequencies for 5 seconds Radio Text: Displays the radio text - Quickly moves through the frequencies information if data is being broadcasted. while the button is pressed. Once each. [Scanning FM/AM broadcast frequency], released, it automatically searches for page 2-5. button : Changes the desired BAND broadcasts which can be received. radio band. Each press will change the Preset buttons : The desired frequency bands in the following order: FM1 can be preset and selected. [Storing FM/AM presets], page 2-5. FM2 FM1 R.Text TUNE Up/Down button Sound button : Adjusts the FAD/BAL, BASS/MID/TREB controls. [Audio sound setting], page 1-11. button : Turns the Radio Text information on and off. SHORT KEY(less than 0.8 second) - The frequency is increased or decreased by 1-step increments (FM : 0.2MHz, AM : 10kHz). AUDIO SYSTEM 2-3 Operating the radio indicator is displayed PART 2 AUDIO SYSTEM Selecting FM/AM broadcast frequency There are 3 ways to select the broadcast frequency - (a) selecting through presets, Voice Command 1. Press the than 0.8 second to quickly move to the button on the steering wheel nearest desired frequency. Once the button is released, the next frequency with superior remote controller. 2. After the beep sound, say a command. reception will be searched automatically. (b) selecting through SEEK, (c) selecting "Preset <1 to 6>" through manual search. "Preset Up" While the SEEK function is operating, pressing the SEEK or TRACK buttons on the "Preset Down" control panel again will terminate SEEK operation and select the current frequency. (a) Selecting a frequency through presets Press the preset button of the desired (b) Selecting a Broadcast frequency broadcast frequency. through SEEK Press the SEEK or TRACK INFORMATION Press the SEEK or SEEK the control panel or the Voice Command buttons on or 1. Press the button on the steering wheel remote controller. buttons for a buttons on FM1, FM2, and AM mode short time on the steering wheel remote screens for less than 0.8 second. Once the "Seek Up" controller. SEEK function is operating (SEEK indicator "Seek Down" The preset frequencies of the current band blinking), the next or previous broadcast will be selected in order. frequency with superior reception will be (c) Selecting a broadcast frequency through There are 6 different preset frequencies searched automatically. manual search Press the or each for FM1, FM2, and AM modes. [Storing FM/AM preset], page 2-5. INFORMATION Press the SEEK or TRACK the control panel or the SEEK 2-4 AUDIO SYSTEM 2. After the beep sound, say a command. TUNE buttons on or SEEK buttons or turn the knob on the control panel in clockwise or counter-clockwise direction. Each click on the tune knob or the or buttons will increase or decrease the buttons on the steering wheel remote controller or the or buttons on frequency by 1 step (FM: 0.2 MHz, AM: 10 FM1, FM2, and AM mode screens for more kHz). Storing FM/AM presets Voice Command 1. Press the button on the steering wheel page 2-4. 2. After the beep sound, say a command. INFORMATION When scanning has completed an entire revolution, the scan function will be terminated remote controller. Press the preset button to store for over "Scan" 0.8 second. The frequency will become PRESET SCAN (over 0.8 second): Scans the stored along with a beep sound. 6 frequencies stored as preset frequencies automatically and the previous played frequency will be restored. in the current band for 5 seconds each. INFORMATION Six preset frequencies each for FM1/FM2/AM modes can be stored using the above instructions. Voice Command 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. "Preset Scan" Scanning FM/AM broadcast frequency Press the Scan button. Press the Scan button again to continue listening to a frequency. SCAN (less than 0.8 second) : Scans all The scan will be terminated and the frequencies and plays only frequencies current frequency will continue to be with superior reception for 5 seconds each. played. AUDIO SYSTEM 2-5 Operating the radio Select the desired frequency. [Selecting FM/AM broadcast frequency], PART 2 AUDIO SYSTEM SIRIUS radio Voice Command 1. Press the Listening to the SIRIUS radio SIRIUS screen and functions button on the steering wheel remote controller. 2. After the beep sound, say a command. "SIRIUS" "SIRIUS <1 or 2 or 3>" "SIRIUS Channel <0 to 223>" "SIRIUS <1 or 2 or 3> Preset <1 to 6>" Mode display: Displays the SIRIUS1/ SIRIUS2/SIRIUS 3 modes. Press the SAT button on the control Channel number: Displays the current panel. The Sirius radio band screen of the playing channel. most recent listened station will be SCAN/PRESET SCAN indicator: If SCAN/ displayed. Press the SAT PRESET SCAN is operating, the switch is button to change the displayed. desired radio band. Each press will Category name: Displays the category change the bands in the following order: name. SIRIUS1 Channel name: Displays the channel SIRIUS2 SIRIUS3 SIRIUS1 Select the desired broadcast channel. [Selecting SIRIUS broadcast channel], name. page 2-7. program title. Song/Program title: Display the song or Artist name: Displays the artist or other related information. 2-6 AUDIO SYSTEM i INFORMATION Selecting SIRIUS broadcast channel category list. [Selecting SIRIUS broadcast channel], There are 5 ways to select a broadcast page 2-7. Scan button: Scans all frequencies or selecting with channel Up/Down, (c) button : Switches between just the preset frequencies for 5 seconds (d) selecting through channel/category list, channel mode and category mode. [Switching the SIRIUS modes], page 2-7. each. [Scanning SIRIUS broadcast channel], (e) selecting by directly inputting the The Song title display may be delayed in accordance to the reception quality of the Sirius broadcast. CAT : Moves to the next or previous category, and automatically plays the first channel within the selected category. : Moves to the next or previous page 2-10. Sound button : Adjusts the FAD/BAL, BASS/MID/TREB controls. [Audio sound setting], page 1-11. Selecting a channel through manual search, channel number. (a) Selecting a channel through presets Press the preset button of the desired channel. channel. Preset channel - (a) selecting through presets, (b) buttons : The desired channel can be preset and selected. [Storing SIRIUS presets], page 2-9. Info. button : Displays the Title, Switching the SIRIUS modes (Channel / Category) Each time the CAT button is pressed, INFORMATION Press the SEEK or SEEK buttons on the steering wheel remote controller for less than 0.8 second. the mode will switch between channel The preset channels of the current band will Artist, Composer, and other information mode and category mode. be selected in order. for the current received channel if the Category mode will begin operating when There are 6 preset channels each for information exists. Search button: Selects the channel by the orange light is turned ON. SIRIUS1, SIRIUS2, and SIRIUS3. [Storing SIRIUS presets], page 2-9. directly inputting the channel number. [Selecting SIRIUS broadcast channel], page 2-7. AUDIO SYSTEM 2-7 Operating the radio button: Displays the channel or List PART 2 AUDIO SYSTEM Voice Command 1. Press the button on the steering wheel remote controller. than 0.8 second to quickly move to the Press the TUNE knob at the desired nearest desired channel. Once the button is channel. The selected channel will begin released, the current channel will be selected. playing. 2. After the beep sound, say a command. Voice Command "Preset <1 to 6>" 1. Press the "Preset Up" "Preset Down" button on the steering wheel remote controller. 2. After the beep sound, say a command. (b) Selecting with Channel Up/Down Press the SEEK or TRACK buttons on the control panel or the or "Channel Up" category list List Press the button. If in channel mode, the Channel list screen will be displayed. "Channel Down" buttons on SIRIUS1, SIRIUS2, or SIRIUS3 mode screens (c) Selecting a channel through manual search Turn the TUNE knob on the control for less than 0.8 second. The previous or next channel will be selected. (d) Selecting channel through channel/ panel in clockwise or counterclockwise direction. Each click on the TUNE knob INFORMATION If in Channel mode, the channel is selected will display the channel information of from all channels. If in Category mode, the the previous or next channel. The previous or next channel of each category is current playing channel will continue to screen will be displayed. selected. Press the SEEK be played. Select the desired category button to or TRACK the control panel or the SEEK buttons on or SEEK display the channel list screen for the INFORMATION buttons on the steering wheel remote controller or the or buttons on SIRIUS1, If in Channel mode, the channel is selected SIRIUS2, and SIRIUS3 mode screens for more first channel of each category is selected. 2-8 AUDIO SYSTEM If in category mode, the Category list from all channels. If in Category mode, the corresponding category. Storing SIRIUS presets Input desired channel number, and press the Done button. Select the desired channel. [Selecting SIRIUS broadcast channel], the selected channel will begin playing. page 2-7. INFORMATION Press the preset button for over 0.8 To prevent inputting a channel which exceeds second. Select the desired channel button. the channel range, numbers which cannot be The frequency will be saved along with The previous screen will be restored and inputted are set to disabled state. beep sound. the selected channel will begin playing. Voice Command (e) Selecting channel by directly inputting the channel number Press the Search button. The Channel search screen will be 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. INFORMATION Six preset frequencies each for SIRIUS1/ SIRIUS2/ SIRIUS3 modes can be stored using the above instructions. "Channel<0 to 223>" displayed. AUDIO SYSTEM 2-9 Operating the radio The previous screen will be restored and PART 2 AUDIO SYSTEM Press the Scanning SIRIUS broadcast channel Press the Scan button. Scan button again to continue playing the channel. Browsing detailed information about the SIRIUS channel SCAN (under 0.8 second): Scans all The scan will be terminated and the Press the channels for 5 seconds each if in channel current channel will continue to play. The detailed information (Title, Artist and mode. If in category mode, scans all Info. button. Composer) for the current channel will be channels within the current category for 5 seconds each. Within the Channel list screen, if the INFORMATION displayed. button next to each channel name is Voice Command 1. Press the button on the steering wheel pressed, the selected channel will be excluded from SCAN operation. remote controller. 2. After the beep sound, say a command. "Scan" PRESET SCAN (over 0.8 second): Scans the Press the 6 preset channels within the current band The detailed information will be turned for 5 seconds each. off. Voice Command 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. "Preset Scan" When scanning has completed an entire revolution, the scan function is automatically terminated and the previous played channel will be restored. Channel 0 is the radio ID and contains information required for SIRIUS activation. 2-10 AUDIO SYSTEM OK button. Operating the CDP Be cautious not to introduce foreign disc or write on disc surfaces. Sharp substances into the disc insert slot. writing utensils and inks used in felt-tip Foreign substances may cause damage pens may cause damage to disc surfaces to the interior of the device. Clean fingerprints and dust off the signal The device may fail to operate properly in surface (coated side) of the disc with a extremely hot or cold temperatures. After using a disc, keep it in the original soft cloth. Discontinue the use of the device unless case to prevent it from becoming Only soft cloths should be used as there normal temperature is maintained. scratched, which may cause the CD to are no grooves for dust to get in as is the (The operational temperature range is: make popping sounds. case with LPs. -10 Do not use heart-shaped discs, octagon- Copy-protected CDs such as S-type CDs Steam can be condensed on the fiberoptic shaped discs, or any other abnormally may not function in the device. lens due to rain, wet conditions, or upon shaped disc. Such discs may be the cause DATA CDs are not supported by the operating the heating system. of malfunctions. device. (However, such discs may operate Skipping may occur to the audio when Do not clean discs with chemical solutions abnormally.) driving on bumpy roads for prolonged About CDP Precautions upon handling discs periods of time or upon severe shock to such as record sprays, antistatic sprays, antistatic liquids, benzene, or thinners. ~ 65 ). For safe and efficient operation the vehicle. Such materials may cause the surface of Do not disassemble the CDP for repair Do not use chemical solvent to clean the DISC to be unrecoverable. purposes. Contact your place of purchase device. Such solvents may cause damage Do not expose the disc to direct sunlight in the case of malfunction. (Complete to the surfaces of the device. for prolonged periods of time. Such service assistance will not be provided if Always use a clean and dry cloth. exposure may lead to disc deformation. the user disassembles the device.) Dust, scratch, and other substances may Do not use water to clean the device. cause popping sound while playing as Exposure to water may cause damage to well as sound deterioration. the device. AUDIO SYSTEM 2-11 Operating the CDP Never place paper on either side of the PART 2 AUDIO SYSTEM WARNING ! Disc format Disc media Disc format CD CD-DA CD-R MP3 CD-RW WMA Multisession-CD DTS-CD Always give your full attention to driving. Avoid operating your system in such a way that you can be distracted driving vehicle operation. CD CD-ROM CD-G Supported disc formats CD-EXTRA The disc types supported by this device CD-TEXT are as shown below. SACD SACD SACD(Hybrid) Disc Size 3-inch (7.6 cm) 5-inch (12.7cm) Disc format Audio format CD-R or CD-RW DISC burned with a bulk CD LPCM CD without quality guarantees may not MP3 MPEG1, Layer3 MPEG2, Layer3 MPEG2.5 WMA 2-12 AUDIO SYSTEM Ver9 be recognized by the device. Inserting an abnormal disc may result in faulty operation or recognition. Disc/Content format compatibility Ordinary disc compatibility This device has This device plays audio files compressed by MPEG-1 audio stream layer 3(MP3) using 32, this device is not supported. 44.1 and 48kHz fixed bit rates. Incompatible software bearing the following logo marks. Although CD-R/RW discs burned as audio files are not supported. CD-RW CDs which have not been finalized are not Variable bit rate files may operate, but the supported by the device, some information play time information may not be such as play time may be displayed. properly displayed. PC-created DISC compatibility. Physical formats of CD : Model 1, Model 2 When recording a disc with a personal XA format 1. CD-R/RW discs (Audio CD and MP3 CD) computer, even discs recorded in a This device only supports tracks with file created with CD-writing devices or "format compatible" with the formats extension of ".MP3" or ".WMA". personal computers may not properly described above may not operate on the This device does not support multi- function in the device. This may be device caused by software settings of the session discs. caused by damaged recording method, recording application. This device supports a maximum of 256 contamination by dirt and other foreign In such cases, contact the software folders and maximum 512 files. substance on the disc surfaces or play developer. lens, and various other reasons. Additional Folders and files which exceed this limit information regarding will not be supported. compatibility can be found on the CD-R/ There are various bit rates which can be Special formats or special features RW software disc box. encoded onto a MP3 file. regarding software DVD-R/RW are not supported by the This device has been designed to be CD-R/RW Compatibility. device. compatible with various bit rates. This device operates as a CD-ROM Audio which has been encoded at including CD-R and CD-RW DISC written in 128kbps will sound similar to CD audio CD Audio or MP3 CD Format. sound quality. AUDIO SYSTEM 2-13 Operating the CDP The writing of CD-R and CD-RW discs with CD-R designed/ Compressed audio compatibility abnormal disc operation such noise. manufactured to be compatible with Audio-CD been However, other contents may cause PART 2 AUDIO SYSTEM Although this device supports low bit rate Inserting/Ejecting Disc MP3 tracks, such tracks may only provide INFORMATION If the operation mode had been in Audio Inserting a Disc low quality sound. For stable operation, the use of files in mode before ejecting the disc, the device Insert the disc into the slot. will be converted back to Audio mode. 95kbps ~ 192kbps bit rate range and The disc will begin playing automatically If the operation mode had been in 44.1kHz SAMPLING recommended. after it has been inserted. Navigation mode, then Navigation mode frequency is screen will remain. INFORMATION If the operation mode had been Audio mode removing for approximately 10 seconds, the before inserting the disc, the device will disc will be re-inserted automatically into convert to the DISC mode screen and begin the disc player. playing. In such a case, the disc will not begin If the operation mode had been Navigation playing automatically. mode, then Navigation mode screen will remain and the disc play status will be displayed through the Audio bar. Ejecting a Disc Press the button. The disc will immediately be stopped and ejected. 2-14 AUDIO SYSTEM If the disc is straddled on the slot without CD CD screen and functions [REW/FF CD track], page 2-17. Random Listening to CD music button : Plays the tracks on the disc in random order. [Setting Random function for CD playing track. [Setting Repeat function for CD music], page 2-18. Scan button : Scans all tracks on the Mode display : Displays that the current Insert the CD or press the CD/AUX button on the control panel if the CD is already inserted. mode is CD mode. RANDOM/REPEAT/SCAN indicator : If RANDOM/REPEAT/SCAN is operating, the switch is displayed. Select the desired track. [Selecting the CD track], page 2-16. disc for 10 seconds each. [Scanning CD track], page 2-18. Sound button : Adjusts the FAD/BAL, BASS/MID/TREB controls. [Audio sound setting], page 1-11. Play time : Displays the play time. Track number : Displays the current playing track number. Voice Command 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. "DISC" button : Plays or pauses the current track. button : REW or FF [Selecting the CD track], page 2-17. button : Previous or next "CD" "CD Track <1 to 665>" track. AUDIO SYSTEM 2-15 Operating the CDP music] , page 2-17. Repeat button : Repeats the current PART 2 AUDIO SYSTEM Voice Command Selecting the CD track There are 2 ways to select a CD Track - (a) selecting through Track Up/Down, (b) selecting through searching Track. (a) Selecting through Track Up / Down Press the SEEK or TRACK buttons on the control panel or the SEEK 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. Press and hold the SEEK or TRACK buttons on the control panel or steering wheel remote controller or the or "Next Track" buttons for over 0.8 second. "Previous Track" The track will play 20 times faster while holding the button and return to normal or SEEK buttons on the steering wheel remote controller or the or buttons on REW/FF CD track play when the button is released. (b) Selecting track through search Turn the TUNE knob on the control Setting Random function for CD music the screen for less than 0.8 second. panel in clockwise or counter-clockwise The next or previous track will begin direction. Each click on the TUNE knob will display Press the Random button. the information of the next or previous Each press will change the function in the track. The current playing track will following order: RANDOM playing. INFORMATION If the TRACK button on the control panel or the SEEK button on the steering wheel remote controller or the button on the continue to be played. * RANDOM : plays all tracks in the disc in Press the TUNE knob at the desired screen is pressed shortly while the track has track. played for more than 3 seconds, the start of The searched track will begin playing. the current track will begin playing. If the track has been playing for less than 2 seconds, the start of the previous track will begin playing. 2-16 AUDIO SYSTEM RANDOM OFF RANDOM random order. Voice Command 1. Press the Scanning CD track button on the steering wheel Press the remote controller. Scan button. Each press will change the function in the following 2. After the beep sound, say a command. "Random" order: SCAN SCAN OFF SCAN. Operating the CDP * SCAN : Scans all tracks in the disc for 10 Say "Random" or "Random Folder" again or seconds each. say "Normal Play" in order to terminate the Voice Command set Random function. 1. Press the button on the steering wheel remote controller. Setting Repeat function for CD music 2. After the beep sound, say a command. "Scan" Press the Repeat button. Each press will Say "Normal Play" in order to terminate the change the function in the following order: set Scan function. REPEAT REPEAT OFF REPEAT Press the * REPEAT : repeats the current playing track. Scan button again to continue listening to the track. Voice Command 1. Press the button on the steering wheel The scan will be terminated and the current track will continue to be played. remote controller. 2. After the beep sound, say a command. INFORMATION "Repeat Track" When scanning has completed an entire Say "Repeat File" or "Repeat Folder" again revolution, the scan function is automatically or say "Normal Play" in order to terminate terminated and the previous played track will the set Repeat. be restored. AUDIO SYSTEM 2-17 PART 2 AUDIO SYSTEM MP3 MP3 disc related information and precaution Supported media formats Although the full length of the file name can This device supports ISO9660 LEVEL1 and be displayed by using the scroll function, the LEVEL2. Detailed specification is as below. full length of folder names may not be Maximum directory layers: 8 layers displayed as the scroll function does not Maximum folder length: 64 Bytes, file operate when displaying folder names. Information name length: 64 Bytes The MP3 file standards supported by the Supported characters for folder name/ file device are as follows. name: Alphanumeric characters, Korean Please use an MP3 bit rate which is less than Acceptable standard: MPEG1 AUDIO standard character set 2350 characters, 128 kbps. LAYER 3 Simplified Chinese 4888 characters The sound quality cannot be guaranteed for Acceptable sampling frequency: 32, 44.1, Maximum number of folders which can MP3s exceeding 128kbps. 48 (KHz) be stored onto one disc: 256 folders Acceptable bit rate: 32, 40, 48, 56, 64, 80, (including ROOT directory) 96, 112, 128, 160, 192, 224, 256, 320 Maximum number of files which can be (kbps) stored onto one disc: 512 files Recommended bit rate & reference Precautions upon burning MP3 files sampling frequency: 96,128, 192 kbps The use of ISO 9660 LEVEL 2 JULIET fixed bit rate /44.1KHz format is recommended when burning ID3 tag MP3 files. Burning in other formats may This device supports ID3v1.0, ID3v1.1, abnormally display the file names. ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags. It is possible to display up to 32 characters Supported media for file and folder names in case of The MP3 media supported by the device UNICODE, and up to 64 characters in case of are CD-ROM and USB. ASCII. 2-18 AUDIO SYSTEM Precaution Listening to MP3 music MP3 screen and functions button : REW or FF. [REW/FF MP3 file], page 2-22. button : Previous or next Random button : Plays all files on the disc or folder in random order. [Setting Random function for MP3 file] , page 2-22. Repeat button : Repeats the current Insert the MP3 disc or press the CD/AUX Mode display: Displays that the current button on the control panel if the MP3 mode is MP3 disc mode. (MP3 files on disc is already inserted. DVDs are not supported.) REPEAT/RANDOM/SCAN indicator: If Select the desired file. [Selecting the MP3 file], page 2-21. REPEAT/RANDOM/SCAN is operating, the switch is displayed. Play file position : Current playing file / Voice Command 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. total files Play time: Displays the play time. Folder name: Displays the folder name. File name: Displays the file name. "DISC" "CD" "MP3" button: Plays or pauses the current file. playing folder or file. [Setting Repeat function for MP3 file], page 2-23. Scan button : Scans all files on the disc or folder for 10 seconds each. [Scanning MP3 file], page 2-23. List button : Displays the MP3 folders and file lists for the disc. [Selecting the MP3 file], page 2-21. Info. button : Displays or hides the detailed file information for the current playing file. [Browsing detailed information about the MP3 file], page 2-22. AUDIO SYSTEM 2-19 Operating the CDP track. [Selecting the MP3 file], page 2-21. PART 2 AUDIO SYSTEM Sound button : Adjusts the FAD/BAL, BASS/MID/TREB controls. [Audio sound setting], page 1-11. the current file will begin playing. INFORMATION If the file has been playing for less than 2 If the operation of the TUNE knob is too seconds, the start of the previous file will rapid, there may be a delay in displaying the begin playing. file information. Selecting the MP3 file There are 3 ways to select an MP3 file - (a) selecting through file up/down, (b) selecting through searching files, (c) selecting through MP3 list. Voice Command 1. Press the Press the TUNE knob at the desired file. button on the steering wheel The searched file will begin playing. remote controller. 2. After the beep sound, say a command. "Next File" (c) Selecting through MP3 List List Press the button. (a) Selecting through File Up / Down Press the SEEK or TRACK buttons on "Previous File" The file list of the folder for the current "Next Folder" playing file will be displayed. the control panel or the SEEK "Previous Folder" SEEK or buttons on the steering wheel remote controller or the or INFORMATION (b) Selecting through search Turn the TUNE knob on the control If many songs and folders are recorded onto second. panel in clockwise or counter-clockwise cause the play list to be improperly displayed The next or previous file will begin playing. direction. Each click on the TUNE knob will display or song search through TUNE operation to the information of the next or previous In such cases, wait until file loading is file. The current playing file will continue complete and try again. Within the MP3 list screen, if the Now playing buttons on the screen for less than 0.8 INFORMATION If the TRACK button on the control panel or the SEEK button on the steering wheel remote controller the to be played. a DISC, file loading time may be longer and operate improperly. button on the button is pressed while searching for files screen is pressed shortly while the file has within a folder or a page, the current playing played for more than 3 seconds, the start of file list will become displayed. 2-20 AUDIO SYSTEM Browsing detailed information about the MP3 file Press the Info. button. The detailed information (Title, Album, displayed. Press the Random button. * RANDOM (less than 0.8 second) : Plays all files in the disc in random order * FOLDER RANDOM (over 0.8 second) : Plays the files in the current folder in Press the desired menu to return to the random order. main screen and play the selected file. Voice Command 1. Press the REW/FF MP3 file Press and hold the SEEK or TRACK 2. After the beep sound, say a command. buttons on the control panel or the SEEK or SEEK buttons on the steering wheel remote controller or the or button on the steering wheel remote controller. "Random" Press the OK button. "Random Folder" buttons for over 0.8 second. The detailed information will be turned Say "Random" or "Random Folder" again or The file will play 20 times faster while off. say "Normal Play" in order to terminate the holding the button and return to normal set Random function. play when the button is released. Press the Random button again to continue listening to the current file. The random selection will be terminated and the current file will continue to play. AUDIO SYSTEM 2-21 Operating the CDP Artist) for the current playing MP3 will be Setting Random function for MP3 file PART 2 AUDIO SYSTEM Setting Repeat function for MP3 file Scanning MP3 file Press the Press the Repeat button. * REPEAT (less than 0.8 second) : Repeats the current playing file * FOLDER REPEAT (over 0.8 second) : Repeats the files in the current folder Scan button. revolution, the scan function is automatically in the disc and plays for 10 seconds each. terminated and the previous played file will * FOLDER SCAN (over 0.8 second) : Scans all files in the current folder for 10 seconds each. button on the steering wheel remote controller. 2. After the beep sound, say a command. "Repeat File" Voice Command 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. "Repeat Folder" "Scan" Say "Repeat File" or "Repeat Folder" again "Folder Scan" or say "Normal Play" in order to terminate Say "Normal Play" in order to terminate the the set Repeat function. set Scan function. Press the Repeat button again to stop Press the repeating the current file. continue listening to the file. The repeat selection will be terminated The scan selection will be terminated and and the current file will continue to play the current file will continue to play. once until the next file starts to play. 2-22 AUDIO SYSTEM When scanning has completed an entire * SCAN (less than 0.8 second) : Scans all files Voice Command 1. Press the INFORMATION Scan button again to be restored. Operating the external devices Listening to music from iPod and may not properly operate or display all of the display information. iPod iPod is a registered trademark of Apple Inc. Supported iPod devices : iPod 3G, iPod 5G, 5.5G, iPod Mini, iPod Nano 1G, 2G. If iPod mode cannot be entered due to identification error, no track, incompatible protocol version, or other reasons, a pop-up Connect the iPod device as shown in the message "No Media Connected" will be picture. displayed for 5 seconds and return automatically to the previous mode. CD/AUX If the message continues even after Connect the iPod or press the reconnecting the iPod, check to see if there button on the control panel if the iPod is are any problems with the iPod device. already connected. CAUTION INFORMATION If a playing iPod is connected to the audio Even if the iPod is connected, the 'No Media system, a high-pitched tone may occur for Connected' message may be displayed if an The identification of the iPod device, battery approximately 1-2 seconds. error has occurred. In such a case, reconnect recharge, and other functions provided by Please turn the iPod device to pause/stop the iPod. the iPod device can be normally supported prior to connecting it to the vehicle. only by using a separated sold iPod connector cable. Select the desired song. [Selecting music from iPod], page 2-26. If the USB cable provided upon purchasing the iPod for charging is used as the connector cable, the device will be recognized as a USB AUDIO SYSTEM 2-23 Operating the external devices Connecting iPod devices PART 2 AUDIO SYSTEM INFORMATION iPod screen and functions An iPod cable assembly can be purchased at button : REW or FF. [REW/FF iPod music], page2-27. button : Previous or next your local KIA dealer. track. [Selcting music from iPod], page 2-26. Voice Command 1. Press the button on the steering wheel Random randomly in album unit. [Setting Random function for iPod 2. After the beep sound, say a command. "iPod" Mode display: Displays that the current mode is iPod mode. RANDOM/REPEAT indicator: If RANDOM/ REPEAT is operating, the switch is displayed. Play file position: Current playing file / total files Play time: Displays the play time. music], page 2-27. Repeat button: Repeats the current playing music. [Setting Repeat function for iPod music], page 2-28. Menu button : Converts to the category menu screen. [Selecting music from iPod], page 2-26. Info. button : Displays or hides the Category name: Displays the category detailed file information for the current name of the playing file. playing file. [Browsing detailed information about Title name: Displays the title name of the playing file. button : Plays or pauses the current file. 2-24 AUDIO SYSTEM button : Plays all music in the current playing list in random order or remote controller. the iPod music], page 2-28. Sound button : Adjusts the FAD/BAL, BASS/MID/TREB controls. [Audio sound setting], page 1-10. Voice Command Selecting music from iPod There are 3 ways to select songs from the iPod device - (a) selecting song through Up/Down, (b) selecting song through 1. Press the button on the steering wheel remote controller. "Next Song" through menu. "Previous Song" (b) Selecting song through search Turn the TUNE knob on the control or SEEK panel in clockwise or counter-clockwise direction. Each click on the TUNE knob buttons on the steering wheel remote controller or the or buttons on will display the information of the next or Press the button for the desired search the screen for less than 0.8 second. The next previous song. The current playing song method. or previous song will begin playing. will continue to be played. INFORMATION INFORMATION INFORMATION If the search mode is accessed while playing a If the TRACK button on the control panel If the operation of the TUNE knob is too song, the most recent searched step will be or the SEEK button on the steering wheel rapid, there may be a delay in displaying the displayed. song information. The search steps upon initial connection are remote controller or the button on the listed below. screen is pressed shortly while the song is playing for more than 3 seconds, the start of Press the TUNE knob at the desired song. the current song will begin playing. If the The searched song will begin playing. song has been playing for less than 2 seconds, the start of the previous song will begin playing. AUDIO SYSTEM 2-25 Operating the external devices the control panel or the SEEK The iPod menu screen will be displayed. 2. After the beep sound, say a command. sequential search, (c) selecting song (a) Selecting song through Up / Down Press the SEEK or TRACK buttons on (c) Selecting song through Menu Press the Menu button. PART 2 AUDIO SYSTEM 1 Step 2 Step 3 Step Setting Random function for iPod music 4 Step Playlist Playlist Song Genre Genre Artist Album Artist Artist Album Song Song Composer Composer Album Song Song Press the Random button. Song * RANDOM (less than 0.8 second) : Plays all files in the current playing list in random order. * ALBUM RANDOM (over 0.8 second) : Plays Song Album Album Song Audiobooks Song Song Songs Song Song Podcasts Program Episode the songs in the current playing list randomly in Album units. Voice Command Episode 1. Press the button on the steering wheel remote controller. REW/FF iPod music Press and hold the SEEK 2. After the beep sound, say a command. or TRACK "Random" "Random Album" buttons on the control panel or the SEEK or SEEK buttons on the steering Say "Random" or "Random Album" again or wheel remote controller or the say "Normal Play" in order to terminate the or buttons for over 0.8 second. set Random. The song will play 20 times faster while Press the desired song button to return holding the button and return to normal Press the Random button again to to the main screen and play the selected play when the button is released. continue listening to the current song. song. The random selection will be terminated and the current song will continue to play. 2-26 AUDIO SYSTEM Setting Repeat function for iPod music Press the Repeat button. Browsing detailed information about the iPod music Press the Info. button. Each press will change the function in the following order: REPEAT REPEAT OFF The detailed information (Title, Album REPEAT displayed. and Artist) for the current channel will be Operating the external devices * REPEAT : Repeats the current playing song. Voice Command 1. Press the button on the steering wheel remote controller. 2. After the beep sound, say a command. "Repeat Song" Say "Normal Play" in order to terminate the Press the set Repeat function. The detailed information will be turned off. OK button. AUDIO SYSTEM 2-27 PART 2 AUDIO SYSTEM USB USB MP3 related information and precaution Supported media formats MP3s exceeding 192Kbps and operation of This device supports ISO9660 LEVEL1 and specific functions (limited to FF/REW LEVEL2. Detailed specification is as below. functions) may be abnormal with variable Maximum directory layers: 20 layers bit rates. Maximum length of folder name/file Information name: 250Bytes The MP3 file standards supported by the Supported characters for folder name/ file device are as follows. name: Alphanumeric characters, Korean When using the external USB device, make Acceptable standard: MPEG1 AUDIO standard character set 2350 characters, sure to keep the device disconnected and LAYER 3 Simplified Chinese 4888 characters connect only some time after turning on Acceptable sampling frequency: 32, 44.1, Maximum number of folders which can the vehicle ignition. The USB device may be 48 (kHz) be stored onto one USB: 2000 folders damaged if the USB device already Acceptable bit rate : 32, 40, 48, 56, 64, 80, (including ROOT directory) connected when the ignition is turned on. 96, 112, 128, 160, 192, 224, 256, 320 Maximum number of files which can be (USB device is not an electronic automotive (kbps) stored onto one USB: 6000 files component) Recommended bit rate & reference Precautions upon formatting USB & The external USB device may not operate sampling frequency: 96,128, 192 kbps downloading MP3 files if the USB device already connected when fixed bit rate /44.1kHz The device only supports FAT type USB vehicle ignition is turned on or off. ID3 tag file system. The device will not play USB The device will not operate when playing media content if the USB is NTFS type. a format which is not MP3 or WMA file This device supports ID3v1.0, ID3v1.1, formats. ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags. Supported media Precautions upon handling USB Precaution The MP3 media supported by the device Please use an MP3 bit rate which is less than Only MP3 files with compression rates are CD-ROM and USB. 192kbps and a fixed bit rate. between 8kbps~320kbps are supported. The sound quality cannot be guaranteed for 2-28 AUDIO SYSTEM Repeatedly connecting/disconnecting the Do not use the USB I/F to charge batteries between 8kbps~320kbps are supported. USB in a short period of time may cause or USB accessories which generate heat. damage to the device. Such acts may lead to deteriorated Be cautious of static electricity when When disconnecting the USB, an abnormal performance or damage to the device. connecting/disconnecting the external sound may occur occasionally. The device may not recognize the USB USB device. Abruptly disconnecting the external USB device if separately purchased USB hubs Encoded MP3 Players will not be device while the USB is operating may and extension cables are being used. recognized when connected as the cause the device to be damaged or Connect the USB directly to the multimedia external device. function abnormally. terminal of the vehicle. When connecting an external USB device, Make sure to disconnect the USB device In the case of high capacity USB devices, the device may not properly recognize only after the audio power is turned off or there are instances where the logical drives the USB when the USB is in some states. when the audio is operating in a different are partitioned for user convenience. When formatting the external USB device, mode. In this case, only the USB music in the top- the device may not properly be properly The amount of time required to recognize level logical drive will be possible to play. recognize a Byte/Sector selection other the external USB device may differ When using partitioned drives, save the than 512Byte or 2048Byte. depending on the type, size, or file desired songs to play on the device only The device will only recognize USB formats stored on the USB. in the top-level logical drive. devices formatted in FAT 12/16/32. Such differences in the required time are In addition, certain USB devices are Some USB devices may not operate not indications of malfunction. configured with a separate drive used to properly because of compatibility issues. Please wait for the required period of install application programs and songs Verify that the external device is supported time to recognize the device. from such drives may not be possible to by the device before starting use. The device supports only USB devices play for the reasons as described above. Avoid contact between the USB connector used to play music files. with bodily parts and foreign substances. AUDIO SYSTEM 2-29 Operating the external devices Only WMA files with compression rates
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Modify Date : 2010:04:09 14:41:40-07:00 Create Date : 2010:04:09 14:41:21-07:00 Metadata Date : 2010:04:09 14:41:40-07:00 Creator Tool : PScript5.dll Version 5.2 Format : application/pdf Title : Microsoft Word - AVN-200TFU_IC_ATT.C,E,G,H,I.doc Creator :EXIF Metadata provided by EXIF.toolsDocument ID : uuid:26f6b435-8228-4192-ac25-6fc3cc6da882 Instance ID : uuid:e0325c56-c707-4df2-9fa9-e61313ab93f8 Producer : Acrobat Distiller 7.0 (Windows) Has XFA : No Page Count : 50 Author :