HYUNDAI MOBIS AVN-700YFPL CAR AVN User Manual

HYUNDAI MOBIS CO., LTD. CAR AVN

user manual

  FCC ID: TQ8-AVN-700YFPL/ IC: 5074A-AVN700YFPCA                                                                                   HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517    FAX:+82 31 639 8525    www.hct.co.kr Report No. : HCTR1005FR15                                                       1/1    ATTACHMENT E.   - User Manual -
DIGITAL NAVIGATION SYSTEMUser's ManualDIGITAL NAVIGATION SYSTEMUser's ManualThank you for purchasing this Audio Navigation System. This user's manual explains how to use the Hyundai Motor Audio Navigation System. Before using the product, read the contents of this user's manual carefully and use this product safely. ● The screens shown in this manual may differ with the actual screens of the product.● #The design and specification of this product may change without prior notification for product improvement.  ● When transferring the vehicle to another individual, include this user's manual so that the next driver can continue its use. iPod®iPod® is a registered trademark of Apple Inc.Bluetooth®Bluetooth® is a trademark owned by Bluetooth SIG, Inc.Preface Copyright(c) 2009 by NAVTEQ. All Map Database cannot be copied without permission.This is protected by U.S. copyright laws. All rights not expressly granted are reserved. You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent.
PART 1PRE-OVERVIEWIntroduction ……………………… 1-2Controller and functions  ………… 1-3Basic operation and setting  ……… 1-6PART 2AUDIO SYSTEM Operating the radio  ……………… 2-2Operating the CDP  ……………… 2-10Operating external devices  ……… 2-22PART 3NAVIGATION SYSTEM Limitations of the navigation system …………………………… 3-2Map Functions   …………………… 3-5Setting a destination   …………… 3-12Operating after setting  a destination  ……………………… 3-28Route guidance …………………… 3-30Setup and Information  …………… 3-36PART 4XM DATAEntering XM Data mode   …………  4-2PART 5VOICE COMMAND SYSTEM Operating voice command   ……… 5-2Setting up the voice command system …………………………… 5-4Voice command list   ……………… 5-6Table of contentsPART 6BLUETOOTH HANDS FREE Before using the Bluetooth Handsfree ………………………… 6-2Converting Bluetooth Handsfree mode ……………………………… 6-2Pairing and connecting a Bluetooth phone ……………………………… 6-4Bluetooth Handsfree screen  layout ……………………………… 6-9Making a call  ……………………… 6-11Answering a call  ………………… 6-13Operating menus during a call  …… 6-14Phone Book  ……………………… 6-16Call History List  …………………… 6-19Phone Music  ……………………… 6-21Bluetooth settings ………………… 6-24Important information  …………… 6-30PART 7PGS (Parking Guide System)About PGS (Parking Guide System) … 7-2PART 8APPENDIXTroubleshooting guide …………… 8-2Map legend   ……………………… 8-5INDEX ……………………………… 8-8Table of contents
PRE-OVERVIEW   1-1PRE-OVERVIEWPART 1PRE-OVERVIEWIntroduction ……………………… 1-2Important information about this manual …………………………………1-2Precaution for safe usage  ………………1-2Controller and functions  ………… 1-3Control panel ……………………………1-3Steering wheel remote controller ………1-5Basic operation and setting  ……… 1-6Turning the Power ON  …………………1-6System Power ON  …………………… 1-6Turning the Power OFF  …………………1-6Turning the Audio ON/OFF  ……………1-6Adjusting audio volume …………………1-7How to operate the screen menu ………1-7Operating typical screen menu ……… 1-7 Inputting letter by using screen keyboard ……………………………… 1-7 Displaying the list  …………………… 1-7 Selecting an item in a list  …………… 1-8 Sorting items from list  ……………… 1-8How to operate menu by voice command ………………………………1-8 Conditions for voice recognition system ………………………………… 1-8Giving voice command ……………… 1-9Sound setting ……………………………1-9FAD/BAL ……………………………… 1-9BASS/MID/TREB ……………………… 1-10Auto volume control ON/OFF ……… 1-10Touch screen beep ON/OFF  ………… 1-10Variable EQ Setup (Optional) ………… 1-10Operating Variable EQ  ……………… 1-10Display setting  ……………………… 1-11Display mode  ………………………… 1-11Brightness …………………………… 1-11Display OFF   ………………………… 1-11Display ON  …………………………… 1-11Viewing Current Time ………………… 1-12Setting the Clock  …………………… 1-12Setting Display OFF  ………………… 1-13Display Photo Frame  ………………… 1-131-2 PRE-OVERVIEWPART 1   PRE-OVERVIEWIntroductionImportant information about this manualThis user manual contains instructions related to safety. Closely observe and comply with all of the safety instructions found within this manual. WARNING !Disobeying the warnings listed within this user's manual may cause fatal or serious inju-ries. Warnings indicate matters which may directly lead to accidents.CAUTION!Disobeying the cautions listed within this user manual may lead to accidents or cause injury. Cautions indicate matters which may lead to vehicle damage or malfunction. INFORMATIONInformation which the user must be aware or allows for more convenient use of the device.Precaution for safe usageWARNING !● Do not operate the Audio Navigation system while driving. ● Do not disassemble, assemble, or modify the Audio Navigation system.● Do not watch the screen for prolonged peri-ods of time while driving. ●Set the volume to a level which allows the driver to be aware of external conditions.   CAUTION!● Do not operate the Audio Navigation sys-tem for prolonged periods of time with the vehicle ignition in ACC. Such operations may lead to battery discharge.● Be cautious not to spill water or introduce foreign objects into the device.● Do not cause severe shock to the device. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch panel. ●  In case of product malfunction, please con-tact your place of purchase or service cen-ter.● When cleaning the touch screen, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents (alcohol, ammo-nia, benzene, thinners, etc.) as such materials may damage the device panel or cause color and quality deterioration. Reference PageThis indicates the title and page that you should refer to. This indicates a key on the control panel.Voice CommandThis indicates an operation by voice com-mand.
PRE-OVERVIEW 1-3PRE-OVERVIEWSEEK/TRACK Up/Down ●SHORT KEY(less than 0.8 second)• FM/AM Mode : automatically searches for the previous or next broadcast frequency and starts playing. •  XM Mode : receives the previous or next channel. •   CD Mode : plays the previous or next track.•  MP3, USB Mode : Plays the previous or next file. •   iPod Mode : plays the previous or next song. ● LONG KEY(over 0.8 second)•   FM/AM Mode : quickly moves through the frequencies while the button is pressed.  Once released, automatically searches for broadcasts which can be received.•  XM Mode : quickly moves to the previous or next channel. •  CD Mode : REW/FF the current playing track. MEDIAEach press will change the bands in the fol-lowing order: DISC(CD, MP3) ĺ (USB or iPod) ĺ (AUX) ĺ (Phone Music)ĺ DISC(CD, MP3)...FM/AMEach press will change the bands in the fol-lowing order: FM1 ĺ FM2 ĺ AM ĺ FM1 ...XM Each press will change the bands in the fol-lowing order: XM1 ĺ XM2 ĺ XM3 ĺ XM1 ...Power / Volume control knob ● Push knob (over 0.8 second) : turns the power off. ● Push knob (under 0.8 second) : each time the knob is pressed, the Audio is turned on and off.● Tune knob : the range of volume adjustment is between 0 ~ 35. Controller and functions Control panel    1-4 PRE-OVERVIEWPART 1   PRE-OVERVIEW•  MP3, USB Mode : REW/FF the current play-ing file. •  iPod Mode : REW/FF the current playing song.PHONE  Displays the Bluetooth handsfree screen. DISP  DISP displays the displays setting screen. MAPVOICEDisplays the map screen for the current posi-tion. ROUTE Displays the Route menu screen. DEST Displays the displays setting screen. TUNE ● FM/AM Mode : push the key to search for the desired frequency. Press the key to receive the selected frequency. ● XM Mode : push the key to search for the desired channel. After a brief moment, the selected channel will be displayed.● CD Mode : push the key to search for the desired track. Press the key to play the selected track.●  MP3, USB Mode : push the key to search for the desired file. Press the key to play the selected file.●  iPod Mode : push the key to search for the desired song. Press the key to play the selected song. SETUP Displays the Setup menu screen. ENTERCompletes the command. RESETResets the system - if software locks-up.INFORMATIONIf pressing the power off knob for over 0.8 sec-ond and the system does not shut down, care-fully use a straightened paper clip at the access hole shown next to the right DISC indi-cator LED to reset the software.The system power will shut-off and restart. Clock●Short Key (under 0.8 second)• When the screen is turned on : displays the current time in the center of the screen.•  When the screen is turned off : turns the full clock screen on and off. ●Long Key (over 0.8 second)•   Displays the clock setting screen. DISC ejectEjects the inserted disc.  DISC insert indicator LEDDisplays whether a DISC has been inserted.
PRE-OVERVIEW 1-5PRE-OVERVIEWSteering wheel remote controllerMODE Each time the Mode key is pressed, the mode changes in the following order: FM1 ĺ FM2 ĺ AM ĺ XM1 ĺ XM2 ĺ XM3 ĺ (DISC) ĺ (USB or iPod) ĺ (AUX) ĺ (Phone Music) ĺ FM1 ...If an unsupported DISC is inserted, if there is no disc, or if an external device (e.g. iPod, USB memory stick, etc.) has not been connected, the mode will not be recognized and auto-matically switch to the next mode.  ● Press this key for over 0.8 second to turn the Audio ON and OFF. ● Press this key when the Power is turned off to turn the power on.Volume Up/Down Increases or decreases the volume within a range between 0 ~ 35. Volume for navigation and voice guidance can be adjusted in the setup mode.Seek Up/Down ●SHORT KEY(less than 0.8 second)•   FM/AM : receives the previous or next pre-set frequency. •  XM Mode : receives the previous or next preset channel. •  CD Mode : plays the previous or next track. •  MP3, USB Mode : plays the previous or next file. •  iPod Mode : plays the previous or next song. ● LONG KEY(Over 0.8 second)•  FM/AM Mode : quickly moves through the frequencies while the key is pressed.  Once released, automatically searches for broadcasts which can be received. •  XM Mode : quickly moves to the previous or next channel. •   CD Mode : REW/FF the current playing track. •   MP3, USB Mode : REW/FF the current play-ing file. •  iPod Mode : REW/FF the current playing song.Voice Recognition Starts Voice Recognition. CALL Press this key to receive an incoming call. If pressed while in AV/Navigation mode, the bluetooth handsfree screen will be displayed.END Press this key to reject an incoming call. If pressed while on a call, then the call will be ended.1-6 PRE-OVERVIEWPART 1   PRE-OVERVIEWBasic operation and setting Turning the Power ON1.    Turn the ignition key onto ACC or ON. If the system power had been on when the igni-tion was turned off, the system will turn back on automatically. 2.    If the system power had been off when the ignition was turned off, the system will remain off. In this case, press the 3:592/ knob to turn on the system power.  System Power ONINFORMATION As system booting starts from the point the door lock is unlocked, the device may com-plete booting before the ACC is turned on or the 3:592/ knob is pressed.Consequently, the booting screen may not be displayed upon initially turning on the system power. 3.    Once system booting is complete, the most recent operated mode will be displayed. For example, turning on the system will display FM1 radio mode if the last operated mode prior to turning off the system had been FM1 radio mode.  Turning the Power OFFIf the 3:592/ knob is pressed for over 0.8 second, a beep will sound and the system power will be turned off. Turning the Audio ON/OFFPress the 3:592/ knob for under 0.8 sec-ond with the system power on to turn the Audio on and off. Voice Command1.  Press the   key on the steering wheel remote controller.2.  After the beep sound, say a command."AV On""AV Off "INFORMATIONConducting the following operations while the AUDIO is off will automatically turn on the Audio system. ●Pressing the AV related keys ()0$0, ;0, 0(',$). ●Inserting a DISC or connecting an external device. 
PRE-OVERVIEW 1-7PRE-OVERVIEWAdjusting audio volumeTurn the 3:592/ knob in clockwise direc-tion to increase the volume and counter-clockwise to decrease the volume. INFORMATION●The range of volume adjustment is between 0 ~ 35. ● Adjustments to the volume cannot be made while the AUDIO is turned off. How to operate the screen menu Operating typical screen menu● If a menu button on the screen is pressed, the corresponding function will begin oper-ation.  ● The same menu button may perform differ-ent functions depending on the length of time the button is pressed (under 0.8 sec-onds or over 0.8 second). For more informa-tion, refer to the specific function within this user manual.●  The current operated button will be high-lighted upon display. ● Buttons which cannot be operated under the current conditions will be displayed in disabled state. Pressing a disabled button will not perform any operation.  Inputting letter by using screen keyboard$%&:  Displays the English alphabet keypad.: Displays the French alphabet keypad. (if available):  Displays the number and symbol key-pad.'HOHWH:  Deletes the previously inputted letter. Pressing for over 0.8 second will delete all content. 'RQH:  The input is completed.: Restores to previous screen. The inputted text will not be saved.  Displaying the list/LVW:  Even if input is not complete, the cur-rent matching items from the data-base will be displayed. INFORMATION The number at the upper-right side of the screen displays the number of current matches. 1-8 PRE-OVERVIEWPART 1   PRE-OVERVIEW Selecting an item in a list▲ ▼:  Moves to the next page or previous page. Ԣ Ԧ: The Ԣ button will be displayed if the text is too long to be displayed in one button.Press the Ԧ button to move the cursor to the end of the text. Press the Ԧ button to move the cursor to the front of the text.  Sorting items from listSelect the desired sorting method to reorga-nize the list in accordance to the selected method. How to operate menu by voice command Conditions for voice recognition systemMost of the functions within the AV and Navigation system can be operated by voice. Please follow the  instructions below for opti-mal voice recognition performance.● Close all windows and  the sunroof. The voice recognition can be improved when in a quiet environment. ● Press the voice recognition button and say the desired voice command after the sound of the beep. ●  The microphone is positioned above the driver so that voice commands can be said while maintaining a proper posture. ●  Pronounce the voice commands naturally and clearly as if in normal conversation.
PRE-OVERVIEW 1-9PRE-OVERVIEW Giving voice command1.    Press the   key on the steering wheel remote controller. A voice command window will be displayed on the lower side of the screen followed by a "Command please" system voice com-ment. 2.    Once the   icon changes into the   icon on the pop-up screen with a beep sound, say the desired voice command. [Voice command list], page 5-6.[ Searching a destination by voice com-mand], page 5-19.   INFORMATIONPress the   key shortly to input the desired voice command. The system voice instruction comment will immediately terminate. When the   icon changes into the   icon with a beep sound, it is possible to input voice com-mands. Sound settingPress the 6RXQG button on the main screen of each AV mode (FM/AM, XM, CD, MP3, USB, iPod) to display the Sound setting screen. FAD/BALThe position of the sound can be adjusted by using the up-down and left-right (▲, ▼, ▶, ◀) buttons on the left side of the screen. Press the &HQWHU button to position the sound in the center of the vehicle.1-10 PRE-OVERVIEWPART 1   PRE-OVERVIEWBASS/MID/TREBThe BASS/MID/TREB can be adjusted by using the left/right buttons (◀, ▶) of each con-trol. Auto volume control ON/OFFEach time the $XWRYROXPHFRQWURO button is pressed, the Auto volume control function is turned on or off.INFORMATIONThe Auto Volume Control is a function which automatically adjusts the volume level in accordance to changes in vehicle speed. Touch screen beep ON/OFFEach time the 7RXFKVFUHHQEHHS button is pressed, the beeping sound that follows each press on the screen will turn on or off. Variable EQ Setup (Optional)Operating Variable EQ1.    Press the 9DULDEOH(4 button at the top of the 6RXQG screen.2.    Within the <Variable EQ> screen, three types of EQ setups such as Normal, Dynamic, Concert can be selected. 3.    Press the 'HWDLO button to view specific information on the three EQ settings.INFORMATIONThe Variable EQ feature may not be supported in some vehicle models and tuner mode.
PRE-OVERVIEW 1-11PRE-OVERVIEWDisplay settingPress the ',63 key on the control panel to display the Setup menu screen. Display mode Press the button for the desired display mode from $XWRPDWLF, 'D\OLJKW, and 1LJKW modes. The current selected mode is high-lighted. ●$XWRPDWLFThe display is automatically converted between Daylight and Night modes in accordance to the on/off state of the vehi-cle taillights. ●'D\OLJKW The bright screen is always maintained regardless of the on/off state of the vehicle taillights. ●1LJKWThe dark screen is always maintained regardless of the on/off state of the vehicle taillights.BrightnessUse the left/right buttons (◀, ▶) for con-trol to make adjustments. Display OFF Press the 'LVSOD\2II button. Display ON Press anywhere on the black screen.The screen prior to display setting will be dis-played. 1-12 PRE-OVERVIEWPART 1   PRE-OVERVIEWViewing Current TimePress the   on the front panel shortly (under 0.8 second) to display the current time at the center of the screen.INFORMATIONIf the screen is turned off, selecting the   will display the current time on the entire screen.Setting the ClockPress and hold the   on the front panel shortly (over 0.8 second) to display the Clock setting screen.●GPS TimeThe time received from the GPS will be dis-played automatically.●Clock TypeSelects the clock type shown as the entire screen when the system power is turned off.●Time FormatWhen the clock type is digital, this button is used to convert the time between 12 hour/ 24 hour systems.●Daylight Saving TimeTurns the Daylight Saving Time function on or off. INFORMATION Clock setting mode can be displayed while the clock is displayed on the screen even when the system is turned off.
PRE-OVERVIEW 1-13PRE-OVERVIEWSetting Display OFFDisplay Photo Frame1.   Press  the 3KRWR)UDPHVHWXS button in the DISPLAY setup screen.2.   Press  the3KRWR)UDPH button in the <Setting Display Off> setup screen.3.   The registered image will be displayed once power is turned off.INFORMATION For Photo Frame setup, the frame must be set in USB Image mode. (For details on setting the Photo Frame, refer to the USB IMAGE page.)4.    To delete an image registered as a frame, press the 'HOHWH3KRWR  button.PART 2   AUDIO SYSTEMPART 2   AUDIO SYSTEMPART 2AUDIO SYSTEM Operating the radio  ………………… 2-2FM/AM Radio  …………………………… 2-2Listening to the FM/AM radio  ………2-2FM/AM screen and functions …………2-2Selecting FM/AM broadcast frequency ……………………………2-3Storing FM/AM preset  ………………2-4Scanning FM/AM broadcast frequency ……………………………2-5XM radio ………………………………… 2-6Listening to the XM radio  ……………2-6XM screen and functions  ……………2-6Switching the XM mode (Channel / Category)  …………………2-7Selecting XM broadcast channel  ……2-7Storing XM preset  ……………………2-9Scanning  XM broadcast channel  ……2-9Operating the CDP  ………………… 2-10About CDP  ……………………………… 2-10Precautions upon handling discs  … 2-10For safe and efficient operation …… 2-10Supported disc formats …………… 2-11Disc/Content format compatibility  … 2-12Inserting/Ejecting Disc  ………………… 2-13Inserting a Disc   …………………… 2-13Ejecting a Disc   …………………… 2-13CD ……………………………………… 2-14Listening to CD music  …………… 2-14CD screen and functions  ………… 2-14Selecting the CD track  …………… 2-14REW/FF CD track …………………… 2-15Setting Repeat function for  CD music …………………………… 2-15Setting Random function for  CD music …………………………… 2-15Scanning CD track  ………………… 2-16 MP3  …………………………………… 2-17 MP3 disc related information and precaution   ………………………… 2-17Listening to MP3 music …………… 2-18MP3 screen and functions ………… 2-18Selecting to MP3 music …………… 2-19REW/FF MP3 file …………………… 2-20 Viewing detail information for MP3 file  …………………………… 2-20Setting Repeat function for MP3 file  …………………………2-20Setting Random function for MP3 file  …………………………… 2-20Scanning MP3 file  ………………… 2-21
AUDIO SYSTEM 2-1AUDIO SYSTEMPART 2AUDIO SYSTEM Operating external devices   ……… 2-22iPod® …………………………………… 2-22 Connecting iPod device …………… 2-22Listening to iPod music  ……… 2-22iPod screen and functions ………… 2-23Selecting an iPod song  …………… 2-23REW/FF iPod song  ………………… 2-24Setting Repeat function for  iPod song  ………………………… 2-25 Setting Random function for iPod song  ……………………… 2-25USB MP3 ………………………………… 2-26 USB MP3 related information and precaution  ………………………… 2-26Precautions upon handling USB  … 2-26Connecting the USB  ……………… 2-28Listening to USB music  …………… 2-28USB IMAGE Mode  ……………………… 2-29 Starting USB IMAGE Mode ………… 2-29 USB IMAGE mode menu screen configuration ……………………… 2-29 Operating USB IMAGE Mode ……… 2-30AUX ……………………………………… 2-31Connecting AUX …………………… 2-31Playing AUX  ……………………… 2-31AUX screen ………………………… 2-312-2 AUDIO SYSTEM PART 2   AUDIO SYSTEMOperating the radio FM/AM RadioListening to the FM/AM radio1.  Press the )0$0 key on the control panel. The FM/AM radio band of the most recent listened station will be displayed. 2.  Press  the )0$0 key to change the desired radio band. Each press will change the bands in the following order: FM1ĺFM2ĺAMĺFM1 ...3.  Select the desired broadcast frequency. [Selecting FM/AM broadcast frequency], page 2-3.Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command.     " Radio""(Radio) AM""(Radio) FM""(Radio) FM <1 or 2>""AM Frequency <530 to 1710>""FM Frequency <87.5 to 107.9>""AM Preset <1 to 6>""FM <1 or 2> Preset <1 to 6>"FM/AM screen and functions  Mode display : displays the FM1/FM2/ AM modes.  SEEK/SCAN/PRESET SCAN/AUTO PRESET indicator : if SEEK/SCAN/PRESET SCAN /AUTO PRESET is operating, the switch is displayed.  EFFGGHHDD
AUDIO SYSTEM 2-3AUDIO SYSTEM STEREO indicator : if the current frequency is a stereo broadcast, the indicator is dis-played. Program Service name : displays the pro-gram service name if data is being broad-cast. Frequency : displays the current playing frequency.  Program type name : displays the program type name if data is being broadcast. Radio Text : displays the radio text infor-mation if data is being broadcast. Frequency Bar : displays the position of the current frequency within the total fre-quency range. Current time : displays the current time manually automatically according to the GPS time.D 3UHVHW buttons : the desired frequency can be preset and selected. [Storing FM/AM preset], page 2-4.E  57H[W ON/OFF button : turns the Radio Text information on and off. INFORMATIONIf the 57H[W is on OFF state, text will not be displayed even if there is text being transmit-ted from the broadcast station.If the 57H[W is on ON state, the frequency bar will not be displayed. Even if the 57H[W in on ON state, text may not be displayed if text is not being received from the broadcast station.F  $XWR6WRUH button : searches the 6 fre-quencies with the most superior reception and automatically stores as preset buttons in corresponding order.[Storing FM/AM preset], page 2-4.G 6FDQ button : scans all frequencies or just the preset frequencies for 5 seconds each.  [Scanning FM/AM broadcast frequency], page 2-5.H   6RXQG button : adjusts the FAD/BAL, BASS/MID/TREB controls.[Sound setting], page 1-10.Selecting FM/AM broadcast frequencyThere are 3 ways to select the broadcast fre-quency - (a) selecting through preset, (b) selecting through SEEK, (c) selecting through manual search.(a) Selecting a frequency through presetPress the preset button of the desired broad-cast frequency. INFORMATION  ● Press the ѧ6((. or 75$&.Ѧ keys on the steering wheel remote controller shortly. The preset frequencies of the current band will be selected in order.● There are 6 preset frequencies each for FM1, FM2, and AM modes. [Storing FM/AM preset], page 2-4.Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command."Preset <1 to 6>""Preset Up""Preset Down" 2-4 AUDIO SYSTEM PART 2   AUDIO SYSTEM(b) Selecting a Broadcast frequency through SEEKPress the ѧ6((. or 75$&.Ѧ keys on the control panel for less than 0.8 second. Once the SEEK function is operating (SEEK indicator blinking), the next or previous broadcast frequency with superior reception will be searched automatically.INFORMATION● Press the ѧ6((. or 75$&.Ѧ keys on the control panel or steering wheel remote con-troller for more than 0.8 second to quickly move to the nearest desired frequency. Once the button is released, the next fre-quency with superior reception will be searched automatically.● If the SEEK function is operating, pressing the ѧ6((. or 75$&.Ѧ keys on the con-trol panel again will terminate SEEK opera-tion and select the current frequency. Voice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.     "Seek Up""Seek Down"(c)  Selecting a broadcast frequency through manual search Turn the ѧ781(Ѧ key on the control panel in clockwise or counter-clockwise direction.Each click on the ѧ781(Ѧ key will increase or decrease the frequency by 1 step (FM: 0.2 MHz, AM: 10 kHz). Storing FM/AM presetThere are 2 ways to store preset frequencies - (a) storing manually and (b) auto store. (a) Storing manually1.  Select the desired frequency. [Selecting FM/AM broadcast frequency], page 2-3.2.  Press the preset button to store for over 0.8 second. The frequency will become stored along with a beep sound. INFORMATIONSix preset frequencies each for FM1/ FM2/AM modes can be stored using the above instruc-tions.(b) Auto storeAfter selecting the desired band, press the $XWRVWRUH button. The 6 frequencies with the most superior reception will be stored as pre-set buttons in corresponding order.  INFORMATION If  the $XWRVWRUH button is pressed again while operating Auto Store, then the Auto Store operation will be terminated and the previously played frequency will be restored.
AUDIO SYSTEM 2-5AUDIO SYSTEMVoice Command1.  Press  the  key on the steering wheel remote controller.2.  After the beep sound, say a command.     "Auto preset"Scanning FM/AM broadcast frequency1.  Press the 6FDQ button. ● SCAN (less than 0.8 second) : scans all fre-quencies and plays only frequencies with superior reception for 5 seconds each. Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command.     "Scan" ● PRESET SCAN (over 0.8 second):  scans the 6 frequencies stored as preset frequencies in the current band for 5 seconds each.Voice Command1.  Press the   key on the steering wheel remote controller.2.  After the beep sound, say a command."Preset Scan" 2.   Press the 6FDQ button again to continue listening to a frequency. The scan will be ter-minated and the current frequency will con-tinue to be played.INFORMATIONWhen scanning has completed an entire revo-lution, the scan function will terminate auto-matically and the previous played frequency will be restored.2-6 AUDIO SYSTEM PART 2   AUDIO SYSTEMXM radioListening to the XM radio1.  Press the ;0 key on the control panel. The XM radio band screen of the most recent listened station will be displayed. 2.   Press the ;0 key to change the desired radio band. Each press will change the bands in the following order: XM1 ĺ XM2 ĺ XM3 ĺ XM1 ...3.  Select the desired broadcast channel. [Selecting XM broadcast channel], page 2-7.Voice Command1.  Press the   key on the steering wheel remote controller.2.  After the beep sound, say a command.     "XM""XM <1 or 2 or 3>""XM Channel <0 to 255>""XM <1 or 2 or 3> Preset <1 to 6>"XM screen and functions Mode display : displays the XM1/XM2/ XM3 modes.  SCAN/PRESET SCAN indicator : if SCAN/PRESET SCAN is operating, the switch is displayed.  Channel number : displays the current playing channel. Channel mode indicator : displays the channel mode in orange.  Category mode indicator : displays the cat-egory mode in orange.  Channel name : displays the channel name. NAME : displays the artist and other relat-ed information. Title name : displays the title name. Category name : displays the category name.  Current time : displays the current time manually automatically according to the GPS time.D 3UHVHW buttons : the desired channel can be preset and selected.  [Storing XM preset], page 2-9.E 0RGH buttons : switches between channel mode and category mode.[Switching the XM mode], page 2-7.E F G H ID
AUDIO SYSTEM 2-7AUDIO SYSTEMF /LVW button : displays the channel or category list.  [Selecting XM broadcast channel], page 2-7.G 6HDUFK button : selects the channel by directly inputting the channel number.[Selecting XM broadcast channel], page 2-7.H 6FDQ button : scans all frequencies or just the preset channels for 5 seconds each. [Scanning XM broadcast channel], page 2-9.I 6RXQG button : adjusts the FAD/BAL, BASS/MID/TREB controls. [Sound setting], page 1-10. Switching the XM mode (Channel / Category)Each time the 0RGH button is pressed, the mode will switch between channel mode and category mode. Use the tune knob to change categories and press the tune knob change to selected cate-gory.Selecting XM broadcast channelThere are 5 ways to select a broadcast channel - (a) selecting through preset, (b) selecting with channel Up/Down, (c) Selecting a chan-nel through manual search, (d) selecting through channel/ category list, (e) selecting by directly inputting the channel number.(a) Selecting a channel through presetPress the preset button of the desired chan-nel.INFORMATION● Press the ѧ6((. or 75$&.Ѧ keys on the steering wheel remote controller for less than 0.8 second. The preset channels of the current band will be selected in order. ●There are 6 preset channels each for XM1, XM2, and XM3.[Storing XM preset], page 2-9.Voice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.     "Preset <1 to 6>""Preset Up""Preset Down"(b) Selecting with Channel Up/DownPress the ѧ6((. or 75$&.Ѧ keys on the control panel for less than 0.8 second.The previous or next channel will be selected. INFORMATION●If in Channel mode, the channel is selected from all channels. If in Category mode, the first channel of each category is selected. ●Press the ѧ6((. or 75$&.Ѧ keys on the control panel or steering wheel remote con-troller for more than 0.8 second to quickly move to the nearest desired channel. Once the button is released, the current channel will be selected.2-8 AUDIO SYSTEM PART 2   AUDIO SYSTEMVoice Command1.  Press the  key on the steering wheel remote controller.2. After the beep sound, say a command.     "Channel Up""Channel Down"(c)  Selecting a channel through manual search         Turn  the ѧ781(Ѧ key in clockwise or coun-ter-clockwise direction to display the previous or next channel information. After a brief moment, the selected channel will be dis-played.INFORMATIONIf in channel mode, the channel is selected from all channels. If in category mode, the first channel of each category is selected.(Category search)(d)  Selecting channel through channel/category list 1.  Press the /LVW button.●  If in category mode, the all category list screen will be displayed. Select the desired category button to dis-play the channel list screen for the corre-sponding category. ● If in channel mode, the all channels list screen will be displayed.2.  Select the desired channel button. The pre-vious screen will be restored and the select-ed channel will begin playing.(e)  Selecting channel by directly inputting the channel number 1.  Press  the 6HDUFK button. The channel input screen will be displayed.2.  Input desired channel number, and press the 2. button.
AUDIO SYSTEM 2-9AUDIO SYSTEMThe previous screen will be restored and the selected channel will begin playing.INFORMATION To prevent inputting a channel which exceeds the channel range, numbers which cannot be inputted are set to disabled state.Voice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.     "Channel<0 to 255>"Storing XM preset1.  Select the desired channel.  [Selecting XM broadcast channel], page 2-7.2.  Press the preset button for over 0.8 second. The frequency will be saved along with beep sound. INFORMATION Six preset frequencies each for XM1/ XM2/ XM3 modes can be stored using the above instructions. Scanning  XM broadcast channel1. Press the 6FDQ button. ● SCAN (under 0.8 second): scans all channels for 5 seconds each if in channel mode. If in category mode, scans all channels within the current category for 5 seconds each. Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command.     "Scan"● PRESET SCAN (over 0.8 second): scans the 6 preset channels within the current band for 5 seconds each. Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command.     "Preset Scan"1.   Press the 6FDQ button again to continue playing the channel. The scan will be termi-nated and the current channel will continue to be played. INFORMATION● When scanning has completed an entire revolution, the scan function is automatical-ly terminated and the previous played chan-nel will be restored. ● Channel 0 is the radio ID and contains infor-mation required for XM Activation. 2-10 AUDIO SYSTEM PART 2   AUDIO SYSTEMOperating the CDPAbout CDPPrecautions upon handling discs ● After using a disc, keep it in the original case to prevent it from becoming scratched, which may cause the CD to make popping sounds. ● Do not use heart-shaped discs, octagon-shaped discs, or any other abnormally shaped disc. Such discs may be the cause of malfunctions. ● Do not clean discs with chemical solutions such as record sprays, antistatic sprays, anti-static liquids, benzene, or thinners. Such materials may cause the surface of DISC to be unrecoverable.● Do not expose the disc to direct sunlight for prolonged periods of time. Such exposure may lead to disc deformation.● Dust, scratch, and other substances may cause popping sound while playing as well as sound deterioration. ● Never place paper on either side of the disc or write on disc surfaces. Sharp writing utensils and inks used in felt-tip pens may cause damage to disc surfaces● Clean fingerprints and dust off the signal surface (coated side) of the disc with a soft cloth. Only soft cloths should be used as there are no grooves for dust to get in as is the case with LPs. ● Copy-protected CDs such as S-type CDs may not function in the device.● DATA CDs are not supported by the device. (However, such discs may operate abnor-mally.)For safe and efficient operation● Do not disassemble the CDP for repair pur-poses. Contact your place of purchase in the case of malfunction. (Complete service  assistance will not be provided if the user disassembles the device.)● Do not use water to clean the device. Exposure to water may cause damage to the device.● Be cautious not to introduce foreign sub-stances into the disc insert slot. Foreign substances may cause damage  to the interior of the device. ● The device may fail to operate properly in extremely hot or cold temperatures. Discontinue the use of the device unless normal temperature is maintained. ( The  operational  temperature  range  is:       -10℃ ~ 65℃).● Steam can be condensed on the fiberoptic lens due to rain, wet conditions, or upon operating the heating system.● Skipping may occur to the audio when driv-ing on bumpy roads for prolonged periods of time or upon severe shock to the vehicle.● Do not use chemical solvent to clean the device. Such solvents may cause damage to the surfaces of the device.Always use a clean and dry cloth.
AUDIO SYSTEM 2-11AUDIO SYSTEMWARNING !Always pay full attention to driving.  Avoid operating your system in such a way that you are distracted from driving your vehicle.Supported disc formats● The disc types supported by this device are as shown below. ●  CD-R or CD-RW DISC burned with a bulk CD without quality guarantees may not be rec-ognized by the device. ●  Inserting an abnormal disc may result in faulty operation or recognition.Disc Size3-inch (7.6 cm)5-inch (12.7cm)Disc format Audio formatCD LPCMMP3 MPEG1, Layer3MPEG2, Layer3MPEG2.5WMA Ver9Formato del disco Medios del disco Formato del discoCD CD-DACD-R MP3CD-RW WMAMultisession-CD DTS-CDCD CD-ROMCD-GCD-EXTRACD-TEXTSACD SACDSACD(Hybrid)2-12 AUDIO SYSTEM PART 2   AUDIO SYSTEMDisc/Content format compatibility ● Ordinary disc compatibility • This device has been designed/ manufac-tured to be compatible with software bear-ing the following logo marks. • CD-R/RW discs (Audio CD and MP3 CD) cre-ated with CD-writing devices or personal computers may not properly function in the device. This may be caused by damaged recording method, contamination by dirt and other foreign substance on the disc sur-faces or play lens, and various other rea-sons. ●  Special formats or special features regard-ing software•CD-R/RW Compatibility.• This device operates as a CD-ROM including CD-R and CD-RW DISC written in CD Audio or MP3 CD Format.However, other contents may cause abnor-mal disc operation such noise. • The writing of CD-R and CD-RW discs with this device is not supported. • Although CD-R/RW discs burned as audio CDs which have not been finalized are not supported by the device, some information such as play time may be displayed. •PC-created DISC compatibility.• When recording a disc with a personal com-puter, even discs recorded in a "format com-patible" with the formats described above may not operate on the device caused by software settings of the recording applica-tion. In such cases, contact the software developer.• Additional information regarding compati-bility can be found on the CD-R/ RW soft-ware disc box.  DVD-R/RW are not supported by the device. ● Compressed audio compatibility This device plays audio files compressed by MPEG-1 audio stream layer 3(MP3) using 32, 44.1 and 48kHz fixed bit rates. Incompatible files are not supported. • Variable bit rate files may operate, but the play time information may not be properly displayed.•  Physical formats of CD : Model 1, Model 2 XA format 1.•  This device only supports tracks with file extension of ".MP3" or ".WMA".• This device does not support multi-session discs.•  This device supports a maximum of 256 folders and maximum 512 files. Folders and files which exceed this limit will not be supported. • There are various bit rates which can be encoded onto a MP3 file. This device has been designed to be com-patible with various bit rates. Audio which has been encoded at 128kbps will sound similar to CD audio sound quality. Audio-CD CD-R CD-RW
AUDIO SYSTEM 2-13AUDIO SYSTEMAlthough this device supports low bit rate MP3 tracks, such tracks may only provide low quality sound. •  For stable operation, the use of files in 95kbps ~ 192kbps bit rate range and 44.1kHz SAMPLING frequency is recom-mended.Inserting/Ejecting Disc Inserting a Disc Insert the disc into the slot. The disc will begin playing automatically after it has been inserted. INFORMATION If the operation mode had been Audio mode before inserting the disc, the device will con-vert to the DISC mode screen and begin play-ing. If the operation mode had been Navigation mode, then Navigation mode screen will remain and the disc play status will be dis-played through the Audio bar. Ejecting a Disc Press the   key. The disc will immediately be stopped and ejected. INFORMATION● If the operation mode had been in Audio mode before ejecting the disc, the device will be converted back to Audio mode. If the operation mode had been in Navigation mode, then Navigation mode screen will remain. ● If the disc is straddled on the slot without removing for approximately 10 seconds, the disc will be re-inserted automatically into the disc player. In such a case, the disc will not begin play-ing automatically. 2-14 AUDIO SYSTEM PART 2   AUDIO SYSTEMCDListening to CD music1.   Insert the CD or press the 0(',$ key on the control panel if the CD is already inserted.2.  Select the desired track.  [Selecting the CD track], page 2-15.Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command."DISC""CD""CD Track <1 to 665>"CD screen and functions Mode display : displays that the current mode is CD mode. REPEAT/RANDOM/SCAN indicator : if REPEAT/RANDOM/SCAN is operating, the switch is displayed.  Track number : displays the track number. Play Time : displays the play time. Current time : displays the current time manually automatically according to the GPS time.D 5HSHDW buttons : repeat the current play-ing track. [Setting Repeat function for CD music], page 2-15.E 5DQGRP button : plays the tracks on the disc in random order. [Setting Random function for CD music], page 2-16.F 6FDQ button : scans all tracks on the disc for 10 seconds each. [Scanning CD track], page 2-16.G 6RXQG button : adjusts the FAD/BAL, BAS, MID, TRE controls. [Sound setting], page 1-10.Selecting the CD trackThere are 2 ways to select a CD Track - (a) selecting through Track Up/Down, (b) select-ing through searching Track.(a) Selecting through Track Up / DownPress the ѧ6((. or 75$&.Ѧ keys on the control panel or steering wheel remote con-troller for less than 0.8 second. The next or previous track will begin playing. D FE G
AUDIO SYSTEM 2-15AUDIO SYSTEMINFORMATION If  the ѧ6((. key on the control panel or steering wheel remote controller is pressed shortly while the track has played for more than 3 seconds, the start of the current track will begin playing. If the track has been play-ing for less than 2 seconds, the start of the previous track will begin playing. Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command."Next Track""Previous Track"(b) Selecting track through search 1.   Turn  the ѧ781(Ѧ key on the control panel in clockwise or counter-clockwise direction. Each click on the ѧ781(Ѧ key will display the information of the next or previous track. The current playing track will continue to be played. 2.  Press the ѧ781(Ѧ key at the desired track. The searched track will begin playing. REW/FF CD trackPress and hold the ѧ6((. or 75$&.Ѧ  keys on the control panel or steering wheel remote controller for over 0.8 second. The track will play 20 times faster while hold-ing the button and return to normal play when the button is released. Setting Repeat function for CD musicPress the 5HSHDW button. Each press will change the function in the following order: REPEAT ĺ REPEAT OFFĺ REPEAT● REPEAT : repeats the current playing track. Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command."Repeat Track"Say "Normal Play" in order to terminate the set Repeat.Setting Random function for CD musicPress the 5DQGRP button. Each press will change the function in the following order: RANDOM ĺ RANDOM OFF ĺ RANDOM...● RANDOM : plays all tracks in the disc in ran-dom order.Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command.     "Random"Say "Normal Play" in order to terminate the set Random function.2-16 AUDIO SYSTEM PART 2   AUDIO SYSTEMScanning CD track1.  Press the 6FDQ button. Each press will change the function in the following order: SCAN ĺ SCAN OFF ĺ SCAN...● SCAN : scans all tracks in the disc for 10 sec-onds each. Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command. "Scan"Say "Normal Play" in order to terminate the set Scan function.2.  Press the 6FDQ button again to continue listening to the track. The scan will be termi-nated and the current track will continue to be played.INFORMATIONWhen scanning has completed an entire revo-lution, the scan function is automatically ter-minated and the previous played track will be restored.
AUDIO SYSTEM 2-17AUDIO SYSTEMMP3   MP3 disc related information and precaution  ● Information• The MP3 file standards supported by the device are as follows. • Acceptable standard: MPEG1 AUDIO LAYER 3• Acceptable sampling frequency: 32, 44.1, 48 (KHz)• Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps)• Recommended bit rate & reference sam-pling frequency: 96,128, 192 Kbps fixed bit rate /44.1KHz• ID3  tag This device supports ID3v1.0, ID3v1.1, ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.• Supported  media The MP3 media supported by the device are CD-ROM and USB.•Supported media formats This device supports ISO9660 LEVEL1 and LEVEL2. Detailed specification is as below.• Maximum directory layers: 8 layers• Maximum folder length: 64 Bytes, file name length: 64 Bytes• Supported characters for folder name/ file name: Alphanumeric characters, Korean standard character set 2350 characters, Simplified Chinese 4888 characters• Maximum number of folders which can be stored onto one disc: 256 folders (including ROOT directory)• Maximum number of files which can be stored onto one disc: 512 files • Precautions upon burning MP3 files • The use of ISO 9660 LEVEL 2 JOLIET format is recommended when burning MP3 files. Burning in other formats may abnormally display the file names.  • It is possible to display up to 32 characters for file and folder names in case of UNICODE, and up to 64 characters in case of ASCII. Although the full length of the file name can be dis-played by using the scroll function, the full length of folder names may not be displayed as the scroll function does not operate when displaying folder names. ●PrecautionPlease use a MP3 bit rate which is less than 128 kbps. The sound quality cannot be guar-anteed for MP3s exceeding 128kbps.2-18 AUDIO SYSTEM PART 2   AUDIO SYSTEMListening to MP3 music1.   Insert the MP3 disc or press the 0(',$ key on the control panel if the MP3 disc is already inserted.2.   Select the desired file.  [Selecting the MP3 file], page 2-19.Voice Command1.  Press  the  key on the steering wheel remote controller.2. After the beep sound, say a command."DISC""CD""MP3"MP3 screen and functions Mode display : displays that the current mode is MP3 disc mode. (MP3 files on DVD discs are not supported.) REPEAT/RANDOM/SCAN indicator : if REPEAT/RANDOM/SCAN is operating, the switch is displayed. Play Time :  displays the play time. Folder name : displays the folder name. File name : displays the file name.  Current time : displays the current time manually automatically according to the GPS time.D ,QIR2Q2II button : displays or hides the detailed file information for the current playing file. [Viewing detail information for MP3 file], page 2-20.E  /LVW button : displays the MP3 folders and file lists for the disc.  [Selecting the MP3 file], page 2-19.F  5HSHDW button : repeats the current play-ing folder or file. [Setting repeat function for MP3 file], page 2-20.G  5DQGRP button : plays all files on the disc or folder in random order. [Setting random function for MP3 file], page 2-20.I  6FDQ button : scans all files on the disc or folder for 10 seconds each.  DEFGHI
AUDIO SYSTEM 2-19AUDIO SYSTEMSelecting to MP3 musicThere are 3 ways to select an MP3 file - (a) selecting through file up/down, (b) selecting through searching files, (c) selecting through MP3 list.(a) Selecting through File Up / DownPress the ѧ6((. or 75$&.Ѧ keys on the control panel or steering wheel remote con-troller for less than 0.8second. The next or pre-vious file will begin playing.INFORMATIONIf the ѧ6((. key on the control panel or steering wheel remote controller is pressed shortly while the song has played for more than 3 seconds, the start of the current song will begin playing. If the song has been play-ing for less than 2 seconds, the start of the previous song will begin playing. Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command.     "Next File""Previous File""Next Folder""Previous Folder"(b) Selecting through search 1.   Turn the ѧ781(Ѧ key on the control panel in clockwise or counter-clockwise direction. Each click on the ѧ781(Ѧ key will display the information of the next or previous file. The current playing file will continue to be played. INFORMATION If the operation of the Tune knob is too rapid, there may be a delay in displaying the file information.2.    Press  the ѧ781(Ѧ key at the desired file. The searched file will begin playing. (c) Selecting through MP3 List 1.     Press  the /LVW button. The file list of the folder for the current playing file will be dis-played. INFORMATIONIf many songs and folders are recorded onto a DISC, file loading time may be longer and cause the play list to be improperly displayed or song search through TUNE operation to operate improperly. In such cases, wait until file loading is complete and try again.2.  Press the desired menu to return to the main screen and play the selected file. 2-20 AUDIO SYSTEM PART 2   AUDIO SYSTEMREW/FF MP3 filePress and hold the ѧ6((. or 75$&.Ѧ keys on the control panel or steering wheel remote controller for over 0.8 second. The file will play 20 times faster while holding the button and return to normal play when the button is released. Viewing detail information for MP3 file1.    Press  the ,QIR2Q button. The detailed information (Title, Artist, Album, Genre) for the current playing MP3 will be displayed. 2.  Press  the ,QIR2II button. The detailed information will be turned off.Setting Repeat function for MP3 filePress the 5HSHDW button. Each press will change the function in the fol-lowing order: Repeat ĺ Folder Repeat ĺ Repeat Off ĺ Repeat ...● Repeat : repeats the current playing file. ● Folder Repeat : repeats the files in the cur-rent folder.Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command.    "Repeat File""Repeat Folder"Say "Normal Play" in order to terminate the set Repeat function.Setting Random function for MP3 filePress the 5DQGRP button. Each press changes the setting as follows : Random ĺ Folder Random ĺ Random Off ĺ Random ...● Folder Random : plays the files in the cur-rent folder in random order. ● Random : plays all files in the disc in random order.Voice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.    "Random""Random Folder"Say "Normal Play" in order to terminate the set Random function.PART 2   AUDIO SYSTEM
AUDIO SYSTEM 2-21AUDIO SYSTEMAUDIO SYSTEMScanning MP3 file1.  Press the 6FDQ button. Each press will change the function in the fol-lowing order : Scan ĺ Folder Scan ĺ Scan Off ĺ Scan ...● Folder Scan : plays all files in the current folder for 10 seconds each. ● Scan: scans all files in the disc for 10 sec-onds each.Voice Command1.  Press  the  key on the steering wheel remote controller.2.  After the beep sound, say a command.    "Scan""Folder Scan"Say "Normal Play" in order to terminate the set Scan function.2.  Press the 6FDQ button again to continue listening to the file. The scan will be termi-nated and the current file will continue to be played.INFORMATIONWhen scanning has completed an entire revo-lution, the scan function is automatically ter-minated and the previously played file will be restored. 2-22 AUDIO SYSTEM PART 2   AUDIO SYSTEMOperating external devices iPod®iPod® is a registered trademark of Apple Inc. Connecting iPod deviceConnect the iPod device as shown in the pic-ture. The identification of the iPod device, battery recharge, and other functions provided by the iPod device can be normally supported only by using a separately sold iPod connector cable. If the USB cable provided upon purchasing the iPod for charging is used as the connec-tor cable, the device will be recognized as a USB and may not properly operate or display all  of the display information. ● Supported iPod devices : Classic 4th/5th/6th, Mini 1st/2nd, NANO 1st/2nd/3rd/4th and Touch 1st/2nd Generations.If iPod mode cannot be entered due to identification error, no track, incompatible protocol version, or other reasons, a pop-up message will be displayed for 5 seconds and return automatically to the previous mode. If the message continues even after reconnecting the iPod, check to see if there are any problems with the iPod device. CAUTION!If a playing iPod is connected to the audio sys-tem, a high-pitched tone may occur for approximately 1-2 seconds. Please turn the iPod device to pause/stop prior to connecting it to the vehicle. INFORMATIONAn iPod cable assembly can be purchased at your local Hyundai dealer.Listening to iPod music1.  Connect the iPod or press the 0(',$ key on the control panel if the iPod is already connected.INFORMATIONEven if the iPod is connected, message may be displayed if an error has occurred. In such a case, reconnect the iPod. 2.  Select the desired song. [Selecting an iPod song], page 2-23.PART 2   AUDIO SYSTEM
AUDIO SYSTEM 2-23AUDIO SYSTEMVoice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.    "iPod"iPod screen and functions Mode display : displays that the current mode is iPod mode. REPEAT/RANDOM indicator : if REPEAT/ RANDOM is operating, the switch is dis-played. Title name : displays the title name of the playing file.  Play Time :  displays the play time.  Artist name : displays the artist name of the playing file.  Album name : displays the album name of the playing file. Current time : displays the current time manually automatically according to the GPS time.D 0HQX button : converts to the search menu screen. [Selecting an iPod song], page 2-23.E 5HSHDW buttons : repeats the current playing song. [Setting repeat function for iPod song], page 2-25.F 5DQGRP button : plays all songs in the current playing list in random order or ran-domly in album unit. [Setting random function for iPod song], page 2-25.G 6RXQG button : adjusts the FAD/BAL, BASS/MID/TREB controls.[Sound setting], page 1-10.Selecting an iPod songThere are 3 ways to select songs from the iPod device - (a) selecting song through Up/Down, (b) selecting song through sequential search, (c) selecting song through menu.(a) Selecting song through Up / DownPress the ѧ6((. or 75$&.Ѧ keys on the for less than 0.8 second. The next or previous song will begin playing. INFORMATION If  the ѧ6((. key on the control panel or steering wheel remote controller is pressed shortly while the track has played for more than 3 seconds, the start of the current song will begin playing. If the track has been play-ing for less than 2 seconds, the start of the previous song will begin playing. DEFG2-24 AUDIO SYSTEM PART 2   AUDIO SYSTEMVoice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.    "Next Song""Previous Song"(b) Selecting song through search 1.   Turn the ѧ781(Ѧ key on the control panel in clockwise or counter-clockwise direction. Operate the ѧ781(Ѧ key dial to display the previous or next channel information. After a brief moment, the selected channel will be displayed. INFORMATION If the operation of the ѧ781(Ѧ key is too rapid, there may be a delay in displaying the song information.(c) Selecting song through Menu1.  Press the 0HQX button. The iPod menu screen will be displayed. 2.   Press the button for the desired search method. INFORMATIONIf the search mode is accessed while playing a song, the most recent searched step will be displayed. The search steps upon initial con-nection are listed below. 3.   Press the desired song button to return to the main screen and play the selected song. REW/FF iPod songPress and hold the ѧ6((. or 75$&.Ѧ keys on the control panel or steering wheel remote controller for over 0.8 second. The song will be play faster while holding the button and return to normal play when the button is released.
AUDIO SYSTEM 2-25AUDIO SYSTEMSetting Repeat function for iPod songPress the 5HSHDW button. Each press will change the function in the following order : Repeatĺ Repeat Off ĺ Repeat ...● Repeat : repeats the current playing song. Voice Command1.  Press  the  key on the steering wheel remote controller.2. After the beep sound, say a command.    "Repeat Song"Say "Normal Play" in order to terminate the set Repeat function. Setting Random function for iPod songPress the 5DQGRP button. Each press will change the function in the following order :Random ĺ Album Random ĺ Random Off ĺ Random ...● Album Random : plays the songs in the cur-rent play list randomly in album units. However, songs within the same album are played in sequential order. e.g.)  Album1(Music1ĺMusic2ĺMusic3ĺ...ĺMusic10)ĺAlbum5(MusicĺMusic2) ĺAlbum4(Music1ĺMusic2ĺMusic3) ... ● Random : plays all files in the current play list (All Songs, certain albums, or user desig-nated iPod Playlists) randomly regardless of album. e.g.)     Music1ĺMusic9ĺMusic5ĺMusic13 ...Voice Command1.  Press  the  key on the steering wheel remote controller.2. After the beep sound, say a command.    "Random""Random Album"Say "Normal Play" in order to terminate the set Random.1 Step 2 Step 3 Step 4 StepPlaylist Playlist SongGenre Genre Artist  Album  SongArtist Artist Album SongComposer composer Album SongAlbum Album SongAudiobooks SongSongs SongPodcasts Program Episode2-26 AUDIO SYSTEM PART 2   AUDIO SYSTEMUSB MP3 USB MP3 related information and precaution ●Information• The MP3 file standards supported by the device are as follows. • Acceptable standard: MPEG1 AUDIO LAYER 3• Acceptable sampling frequency: 32, 44.1, 48 (kHz)• Acceptable bit rate : 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps)• Recommended bit rate & reference sam-pling frequency: 96,128, 192 kbps fixed bit rate /44.1kHz• ID3  tagThis device supports ID3v1.0, ID3v1.1, ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.• Supported  mediaThe MP3 media supported by the device are CD-ROM and USB.•Supported media formats This device supports ISO9660 LEVEL1 and LEVEL2. Detailed specification is as below.•Maximum directory layers: 20 layers• Maximum length of folder name/file name: 250Bytes• Supported characters for folder name/ file name: Alphanumeric characters, Korean standard character set 2350 characters, Simplified Chinese 4888 characters• Maximum number of folders which can be stored onto one USB: 2000 folders (includ-ing ROOT directory)• Maximum number of files which can be stored onto one USB: 6000 files • Precautions upon formatting USB & down-loading MP3 files • The device only supports FAT type USB file system. The device will not play USB media content if the USB is NTFS type. ●PrecautionPlease use an MP3 bit rate which is less than 192Kbps and a fixed bit rate. The sound quality cannot be guaranteed for MP3s exceeding 192Kbps and operation of specific functions (limited to FF/REW func-tions) may be abnormal with variable bit rates.    Precautions upon handling USB● When using the external USB device, make sure to keep the device disconnected and connect only some time after turning on the vehicle ignition. The USB device may be damaged if the USB device already connect-ed when the ignition is turned on.  (USB device is not an electronic automotive com-ponent)● The external USB device may not operate if the USB device already connected when vehicle ignition is turned on or off. ● The device will not operate when playing a format which is not MP3 or WMA file for-mats.
AUDIO SYSTEM 2-27AUDIO SYSTEM1.  Only MP3 files with compression rates between 8Kbps~320Kbps are supported.  2.  Only WMA files with compression rates between 8Kbps~320Kbps are supported. ● Be cautious of static electricity when con-necting/disconnecting the external USB device. ● Encoded MP3 Players will not be recognized when connected as the external device. ● When connecting an external USB device, the device may not be properly recognize the USB when the USB is in some states.  ● When formatting the external USB device, the device may not be properly recognize a Byte/Sector selection other than 512Byte or 2048Byte. ● The device will only recognize USB devices formatted in FAT 12/16/32.● Some USB devices may not operate proper-ly because of compatibility issues. Verify that the external device is supported by the device before starting use.● Avoid contact between the USB connector with bodily parts and foreign substances. ● Repeatedly connecting/disconnecting the USB in a short period of time may cause damage to the device. ● When disconnecting the USB, an abnormal sound may occur occasionally.● Abruptly disconnecting the external USB device while the USB is operating may cause the device to be damaged or function abnormally. Make sure to disconnect the USB device only after the audio power is turned off or when the audio is operating in a different mode. ● The amount of time required to recognize the external USB device may differ depend-ing on the type, size, or file formats stored on the USB. Such differences in the required time are not indications of malfunction. Please wait the period of time required to recognize the device.● The device supports only USB devices used to play music files. ● Do not use the USB I/F to charge batteries or USB accessories which generate heat. Such acts may lead to deteriorated perfor-mance or damage to the device. ● The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly to the multimedia terminal of the vehicle.  ● In the case of high capacity USB devices, there are instances where the logical drives are partitioned for user convenience. In this case, only the USB music in the top-level logical drive will be possible to play. When using partitioned drives, save the songs desired to play on the device only in the top-level logical drive. In addition, certain USB devices are config-ured with a separate drive used to install application programs and songs from such drives may not be possible to play for the reasons as described above.  2-28 AUDIO SYSTEM PART 2   AUDIO SYSTEM● The device may not support normal opera-tion if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected to the device. ● The device may not support normal opera-tion when using a USB memory type besides the Metal Cover Type USB Memory. ● The device may not support normal opera-tion when using formats such as HDD Type, CF, or SD Memory. ● The device will not support files locked by DRM (Digital Rights Management).● The device many not support normal opera-tion if the proper connection with the USB memory fails due to vibrations caused by the vehicle. (i-stick type, etc.)● Please avoid using USB memory products which can be used as key chains or cellular phone accessories as they could cause dam-age to the USB jack. Please make certain only to use plug type connector products as shown below.Connecting the USBConnect the USB as shown in the picture. Listening to USB music1.  Connect a USB or press the 0(',$ key on the control panel if the USB is already con-nected.2.  Select the desired file.  [Selecting the MP3 file], page 2-19.Voice Command1.  Press  the  key on the steering wheel remote controller.2. After the beep sound, say a command.    "USB"INFORMATIONThe USB screen and operation method is the same with MP3 mode. Please refer to the MP3 mode section for more information. Plug Type Connector
AUDIO SYSTEM 2-29AUDIO SYSTEMUSB IMAGE Mode Starting USB IMAGE Mode1.  The USB mode will automatically start when the USB is inserted. When in a different mode, repeatedly press the 0(',$ key to convert to USB mode. (Each press will change in order of AUXĺDISCĺUSB) 2.  The image will become displayed on the screen.INFORMATIONPress the 0XVLF or 9HGLR button on the bottom left side to enter either mode. (Supported only when compatible files exist within the USB) USB IMAGE mode menu screen configuration Mode display : display that the current mode is <USB Image> mode. Folder name : displays the name of the folder where photo files are located. File name : displays the file name of the current photo. File index : displays the number of Image files within the USB (current file / all files) Slide Show Interval : displays intervals of 5, 10, and 20 seconds.  Ԧ button : displays the previous photo. Slide Show View : displays photos in inter-vals of 5, 10, and 20 seconds.  Ԣ button : displays the next photo. USB music (MP3) Mode 0XVLF button : converts to <USB Music> mode.  /LVW button : displays the <Image List> screen.  7LPHU button : allows changes to slide show interval.  6DYH button : upon turning off power, saves the current image as the frame screen image.  +LGH button : hides the button display. 2-30 AUDIO SYSTEM PART 2   AUDIO SYSTEM Operating USB IMAGE Mode(a) Moving to next IMAGE1.  Press the screen.2.  Within the Image screen, press the Ԧ or Ԣ button to flip through each file.(b)  Displaying USB IMAGE Slideshow Interval1.   Repeatedly press the 7LPHU button at the bottom to change the slideshow interval (converts in time intervals of 5 seconds ĺ 10 seconds ĺ 20 seconds ĺ 5 seconds). (c) Registering Frame1.   Press the 6DYH button at the bottom of the <Image> screen. The currently displayed image will be registered as the frame.INFORMATIONFor details on setting up the frame, refer to the frame setup page within Screen setup.Restrictions while driving – Image Play related buttons cannot be used while the vehicle is in motion. There are five buttons such as <Ԣ / Ԧ / 3OD\,FRQ / 6DYH / +LGH .
AUDIO SYSTEM 2-31AUDIO SYSTEMAUXConnecting AUXConnect the external Audio player as shown in the picture.INFORMATIONConnect only by using AUX terminals. Playing AUXConnect an AUX or press the 0(',$ key on the control panel if the AUX is already con-nected. Voice Command1.  Press the  key on the steering wheel remote controller.2.  After the beep sound, say a command.    "Line In"AUX screen Audio AUX screenExternal DevicePART 3   NAVIGATION SYSTEMPART 3NAVIGATION SYSTEM Limitations of the navigation system ……………………………… 3-2GPS signal reception state ………………3-2Vehicle position display …………………3-3Route Guidance …………………………3-4Route Re-calculation  ……………………3-4Starting navigation system  ……………3-5Map Functions  ……………………… 3-5Current position map screen (without route)  …………………………3-5Switching map mode (North Up / Heading Up)  ………………3-6Viewing GPS signal state  ………………3-7Changing the map scale  ………………3-8Displaying / Hiding POI icons on the map 3-9Displaying/Hiding Q.POI icons  ……… 3-9 Displaying / Hiding icons other than Q.POI icons …………………………… 3-9Making a call to POI  ………………… 3-10Scrolling map ………………………… 3-11Setting a destination   ……………… 3-12Destination menu screen and functions ……………………………… 3-12Searching a Destination ……………… 3-13Searching an Address………………… 3-13Searching a Previous Destination …… 3-17Searching an Intersection  …………… 3-17Searching a POI  ……………………… 3-20Searching from Address book  ……… 3-24Searching for Emergency facilities  … 3-25Searching your Home  ……………… 3-25Searching favorite places  …………… 3-26Searching from MAP  ………………… 3-26Searching POI by local POI list  ……… 3-26Operating after searching a destination  3-27Changing destination position  ……… 3-27Setting as Destination / waypoint …… 3-27Adding to address book   …………… 3-27Operating after setting a destination … 3-28Route guidance screen  ……………… 3-28Selecting other route ………………… 3-29Route guidance ……………………… 3-30Route menu screen and functions …… 3-30 Finishing route guidance (Delete Destination)  ………………… 3-30Route overview (View Entire Route) … 3-31Changing Route option ……………… 3-32Editing waypoints  …………………… 3-32Deleting waypoints  ………………… 3-34Re-ordering waypoints  ……………… 3-34Setting detour distance ……………… 3-35Setting avoid streets on route  ……… 3-35Setup and Information   …………… 3-36Setup menu screen and functions …… 3-36Main setting  ………………………… 3-37Setting keyboard for inputting letter   3-37 Setting voice command feedback ON/OFF ……………………………… 3-37Setting Language  …………………… 3-37 Initializing system  …………………… 3-37Navigation setting …………………… 3-38Setting units (mile/ km) ……………… 3-38
NAVIGATION SYSTEM 3-1NAVIGATION SYSTEMPART 3NAVIGATION SYSTEM Setting arrival time and distance display ………………………………… 3-38Registering avoid area  ……………… 3-38 Editing avoid area  …………………… 3-40Deleting avoid area  ………………… 3-41Deleting all avoid areas ……………… 3-41Setting Q.POI icons …………………… 3-42Setting estimate travel time  ………… 3-42My places setting  …………………… 3-43 Registering new address in address book  ………………………… 3-43Editing an address of address book  … 3-45Deleting an address of address book  3-46Deleting an address book …………… 3-47Registering home address …………… 3-48Deleting home address ……………… 3-48Registering favorite place  …………… 3-49Deleting favorite place  ……………… 3-50System information and update  …… 3-51Voice guidance volume setting ……… 3-51Voice guidance volume control ……… 3-51Adaptive volume control ON/OFF …… 3-52Traffic Setup  ………………………… 3-52Traffic Information …………………… 3-52Help …………………………………… 3-543-2 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMLimitations of the navigation systemGPS signal reception state●  As the GPS satellite frequency is received /transmitted in straight lines, reception may not work if hiding devices are placed on or near the GPS antenna or when traveling through the following locations. •Tunnels •Basement parking structures •Underneath an overpass •Roads within forested areas•Areas near high rise buildings •Roads within canyons
NAVIGATION SYSTEM 3-3NAVIGATION SYSTEMVehicle position display● If multipass errors occur due to reflections from buildings or related causes, the current position mark on the navigation may differ from the actual position of the vehicle. ● The position of the vehicle on the naviga-tion may be different from the actual posi-tion if the vehicle is under the  following conditions. If such differences occur, driving for a short period of time will automatically correct the position of the vehicle through map matching or GPS information (several minutes may be necessary in certain cases).• When driving on a Y-shaped road with a narrow angle, the current position may be displayed in the opposite direction.• If the vehicle is loaded onto a ferry or a car transport vehicle, the current position mark may be stalled on the last position prior to loading. •When driving on a spiral-shaped road. • When driving in mountain regions with sharp turns or sudden brakes. • When entering a road after having been in an underground parking structure, building parking structure, or turntable with many rotations. • When the tires have recently been replaced (Especially upon use of spare or studless tires)• If the battery terminal is removed. • When driving in city streets, the current position may be displayed on the opposite side or on an off-road position.• When changing the zoom level from the maximum zoom in level to a different zoom level, the current position mark may be dis-played on a different road. • When driving in heavy traffic with frequent go・stops in traffic or intersections.• When driving under slippery conditions, such as heavy sand, snow, etc. • When driving with the tire chain in place.• When using a tire with an incorrect size specification. • When the tire pressure for the 4 tires are dif-ferent.  • When the replacement tire is a worn or used tire (Especially studless tires having passed a 2nd seasons, etc.) • When driving near high-rise buildings• If a roof carrier has been installed  • When driving under high speeds or having calculated a long-distance route.3-4 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMRoute Guidance● Suitable route guidance may not occur caused by search conditions or the driving position. • Guidance to go straight may be given while driving on a straight road. • Guidance may not be given even when hav-ing turned at an intersection.• There are certain intersections in which guidance may not occur. • A route guidance signaling for a U-Turn in a No U-Turn location may occur. • A route guidance signaling entrance into a no enter zone may occur (No enter zone, road under construction, etc.). • Guidance may be given to a position removed from the actual destination if roads to reach the actual destination do not exist or are too narrow.  • Faulty voice guidance may be given if the vehicle breaks from the designated route (ex: if a turn is made at an intersection while the navigation provided guidance to go straight). • Map Data may be missing or incorrect caus-ing route guidance to not be given.Route Re-calculation● The following phenomena may occur after conducting route recalculation.• Guidance may be given to a position differ-ing from the current position when turning at an intersection.  • Route Recalculation may take a longer peri-od of time when driving under high speeds. • A route guidance signaling for a U-Turn in a No U-Turn location may occur. • A route guidance signaling entrance into a no enter zone may occur (No enter zone, road under construction, etc). • Guidance may be given to a position removed from the actual destination if roads to reach the actual destination do not exist or are too narrow.  • Faulty voice guidance may be given if the vehicle breaks from the designated route (ex: if a turn is made at an intersection while the navigation provided guidance to go straight)
NAVIGATION SYSTEM 3-5NAVIGATION SYSTEMStarting navigation system Press the Navigation mode key (0$392,&(, '(67, 5287(, 6(783). The Caution screen will always be displayed when first entering into Navigation mode. Read the contents of the caution screen carefully and press the $JUHH button.Map Functions Current position map screen (without route)Press the 0$392,&( key on the control panel to display the map of current position and the neighboring area. GPS signal state indicator : displays the state of GPS signal reception.[Viewing GPS signal state], page 3-7.  Map scale level indicator : displays the cur-rent map scale.[Changing the map scale], page 3-8.  Landmark icons : landmark icons are dis-played on the map when the map scale level is set to under 300 ft (100m depend-ing on map data)[Appendix : landmark icons], page 7-7.  POI icons : POI icons are displayed on the map when the map scale level is set to under 0.5 mi (800m).[Appendix : POI icons], page 7-5. Current vehicle position icon : displays the current position of the vehicle.DEF3-6 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMD North Up / Heading Up switch : displays the current map mode and the map mode can be switched between North Up and Heading Up. [Switching map mode], page 3-6.E POI : displays or hides the POI icon on the map.[Displaying/Hiding POI icons on the map], page 3-9.F Map scale : increases or decreases the map scale. [Changing the map scale], page 3-8.Switching map mode (North Up / Heading Up)Each time the compass button is pressed, the screen will switch in the order shown below. Heading Upĺ North Upĺ Heading Up ...INFORMATION All map screens (map screen after setting des-tination & whole route display screen) except the current position screen will always be dis-played in North Up mode. ● North Up : displays the map always facing the North direction regardless of the direc-tion which the vehicle is traveling. The vehicle icon is displayed in the center position of the map. ● Heading Up : displays the map always fac-ing the direction which the vehicle is travel-ing. The vehicle icon is displayed in the lower center position of the map.Voice Command1.  Press the   key on the steering wheel remote controller.2.  After the beep sound, say a command."North Up""Heading Up"
NAVIGATION SYSTEM 3-7NAVIGATION SYSTEMViewing GPS signal stateThe state of GPS signal reception is displayed as shown below.●   (active) : GPS reception is satisfactory.●   (inactive) : GPS reception is unsatisfactory.  [System information and update], page 3-51.INFORMATION● GPS (Global Position System) : GPS is a sys-tem developed and operated by the United States which determines the current loca-tion of the user (longitude, latitu de, etc.) by generally using 4 or more satellites.  This system is used with related GPS informa-tion, various sensors, road map data, and other navigation related information.●GPS information may not operate under thefollowing conditions. •  When buildings, tunnels, or other obstruc-tions block satellite signals.•  When materials are placed above the GPS antenna and block satellite signals.•  When the satellite does not transmit sig-nals (signal transmission is controlled by the satellite control center in the United States and may not transmit when under repair, modification, etc). •  When a digital cellular phone (1.5GHz) is placed near the GPS antenna.● This system uses GPS information, various sensors, road map data, and other related information to display the current position. Errors may occur if the satellite is transmit-ting inaccurate signals or if which can only two or less satellite signals can be received. Errors which occur in such conditions can-not be corrected.   3-8 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM Changing the map scalePress the   or   button. The map scale will be increased or decreased by one level. INFORMATION  Each  time  the   or   button is pressed, the scale bar will be displayed. The scale can be changed by directly pressing the scale level on the scale bar. The green color on the scale bar indicates the current scale level while the orange color indi-cates the selected scale level.  ƔPress the   or  button for over 0.8  second. The scale will continuously change.   ƔIf the scale range limit is reached, the   or  button will be disabled.   Ɣ The map scale range is between 1 and 14: 10,240,000 ~ 1 : 5,000. 󰦄󰦃Actual distanceLevelmi / ft km / m1 150 ft 50 m2 300 ft 100 m3 700 ft 200 m4 0.25 mi 400 m5 0.5 mi 800 m6 1 mi 1.6 km7 2 mi 3.2 km8 4 mi 6.4 km9 8 mi 12 km10 16 mi 25 km11 32 mi 50 km12 64 mi 100 km13 130 mi 200 km14 250 mi 400 km
NAVIGATION SYSTEM 3-9NAVIGATION SYSTEMVoice Command1.  Press  the  key on the steering wheel remote controller.2.  After the beep sound, say a command."Zoom In""Zoom Out""Zoom Maximum""Zoom Minimum""Zoom level <1 to 14>""Zoom <actual distance>"" (ex. Zoom 700ft)"Displaying / Hiding POI icons on the mapDisplaying/Hiding Q.POI icons1. Press the 32,Ԥ button.      Related menu buttons will be displayed at the bottom of the screen. INFORMATION The Q.POI icons are set to  - Gas Station, - Parking,  - Hotel,  - Golf Course, - Bank,  - Fast Food (6 icons) by default. This setting can be changed in SETUP. [Setting Q.POI icons], page 3-42. 2. Press the icon buttons to display or hide. To turn off all POI icons displayed on the map, press the $//2)) button. INFORMATION ●The current displayed POI icons are high-lighted while the icons not being displayed are shown as normal buttons.●If there are no POI icons being displayed, the $//2)) button will be disabled. ●POI icons are displayed when the scale is under 0.5 mi (800m).  Displaying / Hiding icons other than Q.POI icons1. Press  the 32,▼ button. Related menu buttons will be displayed at the bottom of the screen. 2.Press the 2WKHUV button. INFORMATIONQ.POI stands for Quick POI and refers to the function which turns POI icon display on or off on the map. 3-10 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM(a) by category list3.Press the desired main category button. 4. Select the desired sub category menu to display or hide (Multiple selections are pos-sible). Press the selected menu again to cancel the selection. 5. If  the 6KRZ,FRQV button is pressed, the selected menus will be displayed or hidden on the map screen. Voice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.   "Show <POI name>"  (ex. Show ATM)"Hide <POI name>"  (ex. Hide ATM)"Hide All"Making a call to POI  After searching a POI, the POI phone number information can be used to make a call to the POI facility. 1. Use the various search methods, such as the map scroll function, Q.POI search function, and destination search function to search for a POI.2.Press the   button.
NAVIGATION SYSTEM 3-11NAVIGATION SYSTEM3. Bluetooth is used to make a call to the POI facility.4. Once the call is ended, the map is restored to the current vehicle location. INFORMATION● Making a call is not possible if there is no telephone information for a POI or if there is no mobile phone connected through Bluetooth.● For more information of mobile phone authentication through Bluetooth or detailed information on conducting search, refer to  [Pairing and connecting a  Bluetooth phone], page 5-4.Scrolling map  Press the map area on the map screen. The selected point will be centered on the screen and the scroll mark will be displayed. Information about the marked point and straight line distance from the current posi-tion will be displayed at the top of the screen. INFORMATION If a map area on the map screen is pressed, the map will continuously scroll in the corre-sponding direction until the pressing is released. 3-12 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMSetting a destination Destination menu screen and functionsPress the '(67 key on the control panel to display the destination menu screen. D Address : sets the destination through address search. [Searching an Address], page 3-13.E Previous Dest : sets the destination through the previous destination list. [Searching a Previous Destination], page 3-17 .F Intersection : sets the destination through intersection search. [Searching an Intersection], page 3-17.G POI Search : sets the destination through POI Category search. [Searching a POI], page 3-20 .H Address Book : sets the destination through address book search. [Searching from Address book], page 3-24 .I Emergency : sets the destination through emergency facilities search. [Searching for Emergency facilities], page 3-25 .J HOME : sets the stored HOME as the desti-nation. [Searching your Home], page 3-25 .K Favorite  place  ~  : sets the destina-tion with one of the stored favorite places. [Searching favorite places], page 3-26 .DGJKEHFI
NAVIGATION SYSTEM 3-13NAVIGATION SYSTEMSearching a DestinationSearching an AddressThere are 2 ways to set the destination through address search-(a) by street, (b) by city. 1.Press the '(67 key.2.Press the $GGUHVV button.3. Press the 6WDWH button to change the state. 4. Input the State name and press the /LVW button. If the number of matches with the input is less than 4 results, then the state list screen will be displayed automatically. If the number of matches is only one result, then the state will automatically be changed without having to manually select the state. 5. Select the desired state from the list to change the state.(a) by street6.Press the 6WUHHW button.3-14 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM7. Input the House number and Press the 'RQH button to complete. If the House number is not recognized, press the 6NLS button. In this case, the range of house numbers will be displayed during the last step.8. Input the Street name and press the /LVW button. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 9. If the desired street from the list is selected, the corresponding position will be dis-played on the map. INFORMATIONIf more than 30 cities exist with the selected street, then the city input screen will be dis-played. If less than 30 cities exist, then the city selection screen will be displayed.10. Input the city name and press the /LVW button to complete. If the number of matches with the input is less than 4 results, then the list screen will be dis-played automatically. 11.Select the desired city from the list.
NAVIGATION SYSTEM 3-15NAVIGATION SYSTEM12. This screen will be displayed if the House number had not been inputted during step 6 and more than 2 house numbers ranges exist. Select the desired House number range. 13. This screen will be displayed if the House number had not been inputted during step 6 and only one house numbers range exists.Input the House number and press the 'RQH button to complete. The corresponding position will be dis-played on the map. (b) by city5.Press the &LW\ button.6. Input the city name and press and press the /LVW button.  If the number of matches with the input is less than 4 results, then the city list screen will be displayed automatically. 7.Select the desired city from the list. 3-16 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM8. Input the house number and press the 'RQH button to complete. If the House number is not recognized, press the 6NLS button. In this case, the range of house numbers will be displayed during the last step.9. Input the Street name and press the /LVW button to complete. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically.10. Select the desired street from the list and the corresponding position will be dis-played on the map. 11. This screen will be displayed if the House number had not been inputted during step 8 and more than 2 House number ranges exist. Select the desired House number range.11. This screen will be displayed if the House number had not been inputted during step  H and only one House number range exists. Select the house number range and Press the 'RQH button to complete. The corresponding position will be dis-played on the map.Voice Command1.  Press the  key on the steering wheel remote controller.2.  After the beep sound, say a command.   "Find address" [Find address], page 5-19.
NAVIGATION SYSTEM 3-17NAVIGATION SYSTEMSearching a Previous Destination1.Press the '(67 key.2.Press the 3UHYLRXV'HVW button.3. Select the desired previous destination. The corresponding position will be displayed on the map.  Voice Command1.  Press  the  key on the steering wheel remote controller.2.  After the beep sound, say a command."Previous destination"[Previous  destination],  page  5-24.     "Previous start point"[Previous start point], page 5-25. Searching an Intersection There are two ways to set the destination through intersection search-(a) by street, (b) by city. 1.Press the '(67 key. 2.Press the ,QWHUVHFWLRQ button. 3. Press the 6WDWH button to change the state. 4. Input the state name and press the /LVW button. If the number of matches with the input is less than 4  results, then the state list screen will be displayed automatically. If the number of matches is only one result, then the state will automatically be changed without having to manually select the state.5. Select the desired state from the list to change the state. 3-18 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM(a) by street6.Press the 6WUHHW button.7. Input the name of the 1st street and press the /LVW button. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 8.Select the desired 1st street from the list. 9. Input the name of the 2nd street and press the /LVW button. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 10. Select the desired 2nd street menu from the list. The corresponding position will be displayed on the map. 11. If the selected 2nd street is within more than 2 cities, then the city list screen will be displayed. Select the desired city menu from the list. The corresponding position will be dis-played on the map.
NAVIGATION SYSTEM 3-19NAVIGATION SYSTEM(b) by city6.Press the &LW\ button.7. Input the city name and press the /LVW button. If the number of matches with the input is less than 4 results, then the city list screen will be displayed automatically. 8.Select the desired city name.9. Input the name of the 1st street and press the /LVW button. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 10. Select the desired 1st street menu from the list. 11. Input the name of the 2nd street and press the /LVW button. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 3-20 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM12. Select the desired 2nd street menu from the list. The corresponding position will be dis-played on the map. 13. If the selected 2nd street is within more than 2 cities, then the city list screen will be displayed. Select the desired city menu from the list. The corresponding position will be displayed on the map.Searching a POI There are 3 ways to set the destination through POI search - (a) by category, (b) by name, (c) by phone number. 1.Press the '(67 key.2.Press the 32,6HDUFK  button.3.Press the 6WDWH button.4. Input the state name and press the /LVW button. If the number of matches with the input is less than 4 results, then the state list screen will be displayed automatically.If there is only one matching result, then the state will automatically be changed without having to manually select the state.5. Select the desired state from the list to change the state.
NAVIGATION SYSTEM 3-21NAVIGATION SYSTEM(a) By category Searches for facilities nearby the current posi-tion or from the city center.6.Press the &DWHJRU\ button.7. Press the 1HDUFXUUHQWSRVLWLRQ button to search for facilities nearby the current posi-tion, or press the 1HDUFLW\FHQWHU button to search for facilities in the near city center. (a-1) Near current position Searches for facilities within a 30 mi (45km) radius of the current position. 8.Press the desired main category menu. Voice Command1.  Press the  key on the steering wheel remote controller.2.  After the beep sound, say a command.  "Find nearest POI"[Find nearest POI], page 5-20.9. Press the desired sub category menu. 10.Select the desired menu button. The corresponding position will be dis-played on the map. 3-22 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM(a-2) Near city center Searches for facilities from the city center. 8. Input the city name and press the /LVW button. If the number of matches with the input is less than 4 results, then the city list screen will be displayed automatically. 9.Press the desired city menu. 10.Press the desired main category. 11.Press the desired sub category.12. Select the desired menu button. The corresponding position will be dis-played on the map. INFORMATIONThe distance on each POI item button refers to the distance from the city center.
NAVIGATION SYSTEM 3-23NAVIGATION SYSTEM(b) By name6.Press the 1DPH button.7. Input the name of the POI and press the /LVW button. If the number of matches with the input is less than 4 results, then the facilities list screen will be displayed automatically. 8. Select the desired POI menu. The corresponding position will be dis-played on the map. INFORMATION When necessary,  the search conditions for the city and category can be changed by pressing the $GYDQFHG button. ●Changing City 1.Press the &LW\ button.2. Input the city name and press the /LVW button.3.Select the desired city name.●Changing Category1.Press the &DWHJRU\ button.2.Select the desired main category menu. 3.Select the desired sub category menu. (c) By phone number6.Press the 3KRQH button.3-24 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM7. Input the phone number and Press the 'RQH button to complete. The corresponding position will be dis-played on the map. Voice Command1.  Press the  key on the steering wheel remote controller.2.  After the beep sound, say a command."Destination POI by Phone Number"[Destination POI by phone number], page 5-22.Searching from Address book1.Press the '(67 key.2.Press the $GGUHVVERRN button.3. Select the desired address book (user) menu. INFORMATIONThis system provides 5 address books. Each addresses book can hold up to 200 entries. 4. Select the desired address name from the list. The corresponding position will be displayed on the map. [Registering new address in address book], page 3-43.Voice Command1.  Press  the  key on the steering wheel remote controller.2.   After the beep sound, say a command.  "Destination by address book"[Destination by address book], page 5-24.
NAVIGATION SYSTEM 3-25NAVIGATION SYSTEMSearching for Emergency facilities1.Press the '(67 key.2.Press the (PHUJHQF\ button.3.Select the desired facility category. 4.Select the desired facility. The corresponding position will be dis-played on the map. Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command.  "Find emergency <Category>" [Find emergency <Category>], page 5-23. Searching your Home1.Press the '(67 key.2.Press the +20( button. The Home position will be displayed on the map. INFORMATION If the Home address is not registered, then the +20( button will be displayed. [Registering home address], page 3-48.Voice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command."Go home" [Go home], page 5-25. 3-26 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMSearching favorite places1.Press the '(67 key.2.  Select the desired button from  ~  .The corresponding position will be dis-played on the map. INFORMATIONIf the address of the Favorite place is not regis-tered, then the  ~  buttons  without registered addresses will be disabled.[Registering favorite place], page 3-49.Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command.  "Destination by memory point <1 to 5>"[Destination by memory point <1 to 5>], page 5-25.Searching from MAP Position the scroll mark at the destination by scrolling the map on the map screen. Searching POI by local POI list1. Press the 32,▼ button on the map screen. 2.Press the 2WKHUV button.3.Press the /RFDO32,OLVWV button.4.Select the desired POI menu. The corresponding position will be dis-played on the map. Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command.  "Find nearest <POI name>"[Find nearest <POI name>], page 5-21.
NAVIGATION SYSTEM 3-27NAVIGATION SYSTEMOperating after searching a destinationChanging destination position : Changes the position of the destination by scrolling the map. [Scrolling map], page 3-11.Setting as Destination / waypoint :Sets the position as the destination or way-point. Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command.  "Start guidance" (Sets the position of the scroll mark as the destination and begins route guidance.)Adding to address book : Saves the position in the address book. [Registering new address in address book], page 3-43. Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command.  "Store Marked Location to <text tag>"3-28 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMOperating after setting a destination Starting Route Guidance Press the 6WDUW*XLGDQFH button. Route Guid-ance will start. ●Route simulation• If  the 6WDUW*XLGDQFH button is pressed and held for over 0.8  second, then the route simulation will start. • If  the 0$3 key on the control panel is pressed during route simulation, then route simulation will be terminated. Voice Command1.  Press the   key on the steering wheel remote controller.2. After the beep sound, say a command.  "Time to destination" "Distance to destination"Route guidance screen● Symbol guidance mode : if the   button is pressed, then the following route guid-ance screen will be displayed. ●  Turn-List mode : if the   button is pressed, then the following route guidance screen will be displayed.
NAVIGATION SYSTEM 3-29NAVIGATION SYSTEM● Highway mode : if the   button is pressed, then the following route guidance screen will be displayed.● Intersection zoom mode : this route guidance screen is automatically displayed during guidance at an intersection. Once guidance at the intersection is com-plete, the screen will automatically disappear and the previous guidance screen will be restored. ● Highway junction mode : this route guid-ance screen is automatically displayed dur-ing guidance at highway junctions. Once guidance at a highway junction is complete, this screen will automatically dis-appear and the previous guidance screen will be restored. Selecting other route1.Press the $OWUHQDWLYH5RXWH button. 2. Other routes can be selected by pressing the ◀ or ▶ buttons. 3-30 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMRoute guidance Route menu screen and functionsPress the 5287( key on the control panel. The ROUTE menu screen will be displayed. D Cancel Route: deletes destination, way-points and terminates route guidance. [Finishing route guidance], page 3-30 .E Route Overview: displays the entire route and route detailed.[Route overview], page 3-31 .F Route Option: the route option can be changed. [Changing Route option], page 3-32 .G Edit Waypoint: waypoints can be added/deleted and the order can be changed. [Editing waypoints], page 3-32 . H Detour : searches detour routes. [Setting detour distance], page 3-35 .I Avoid Streets: searches routes which avoid the selected streets. [Setting avoid streets on route], page 3-35. Finishing route guidance (Delete Destination)1. Press  the 5287( key.2. Press  the &DQFHO5RXWH button. 3.Press the <HV button. The destination and waypoints are deleted and the route guidance is terminated.[Finishing route guidance], page 3-30 .DGEHFI
NAVIGATION SYSTEM 3-31NAVIGATION SYSTEMVoice Command1.  Press  the   key on the steering wheel remote controller.2. After the beep sound, say a command.  "Cancel route"(Terminates route guidance and deletes the set destination and waypoints.)Route overview (View Entire Route)1.Press the 5287( key.2.Press the 5RXWH2YHUYLHZ button.3.Press the 7XUQE\7XUQ button.INFORMATIONIf the 5HWXUQWRJXLGDQFH button is pressed, route guidance screen is displayed.4. The detailed route information can be viewed3-32 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMChanging Route option1.Press the 5287( key.2.Press the 5RXWH2SWLRQ button.3. Press the button for the desired route guid-ance method. Guidance will be restarted after recalculat-ing the route with the selected guidance method. Voice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.  "Replan recommended route""Replan shortest route"Editing waypoints Adding  waypointsThere are 2 ways to add waypoints - (a) searching for POI nearest to the route, (b) using advanced search.1.Press the 5287( key.2.Press the (GLW:D\SRLQW button.3. Press the 3UHVVWRDGGQHZZD\SRLQW but-ton.
NAVIGATION SYSTEM 3-33NAVIGATION SYSTEM(a) Searching POI lists near route 4.Press the 1HDU32,/LVWVRQ5RXWH button.  5.Select the desired category.  6.Select the desired sub category from list.  7. Select the desired POI from the list. The corresponding position will be dis-played on the map.  8.Press the $GGDV:D\SRLQW button.  9. Press the 'RQH button to complete. Guidance will restart after recalculating the route.3-34 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM(b) Using advanced Search The method for searching waypoints through the $GYDQFHGPRUH button is the same method as searching destination.[Searching a Destination], page 3-13.Deleting waypoints1. Press  the 5287( key.2.Press the (GLWZD\SRLQW button. 3. Select the waypoint and press the 'HOHWH button. 4.Press the <HV button.5. After deleting, press the 'RQH button to complete. Guidance will be  restart after recalculating the route. Re-ordering waypoints1.Press the 5287( key.2.Press the (GLWZD\SRLQW button. 3. Select the desired waypoint and use the 0RYH▲, 0RYH▼ buttons to change the order. 4. Once re-ordering is complete, press the 'RQH button to complete. Guidance will restart after recalculating the route.
NAVIGATION SYSTEM 3-35NAVIGATION SYSTEMSetting detour distance1.Press the 5287( key.2.Press the 'HWRXU button. 3. Select the desired detour range.Guidance will restart after recalculating the detour route. Voice Command1.  Press  the   key on the steering wheel remote controller.2.  After the beep sound, say a command.  "Detour <1 or 2 or 5 or 10> miles""Detour <1 or 2 or 5 or 10> kilometers"Setting avoid streets on route1.Press the 5287( key.2.Press the $YRLGVWUHHWV button. 3. Select the desired streets to avoid(  avoid, allow) and press the 'RQH  button to complete. Guidance will  restarted after recalculating the route to avoid the selected streets. 3-36 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMSetup and Information Setup menu screen and functionsPress the 6(783 key on the control panel to display the setup menu screen.D Main button : changes to the input key-board type, voice command feedback ON/OFF settings and system initialization can be made. [Main setting], page 3-36 .E Voice Setup button : adjusts the Navigation guidance volume. [Voice guidance volume setting], page 3-51.F Navigation button : navigation related set-tings can be set. [Navigation setting], page 3-38 .G Clock Setup buttonH My Places button : the Address book, Home address, Favorite places, Previous destination can be edited.[My places setting], page 3-43 .I  Help button : the help contents can be viewed.  [Help], page 3-54 .J Traffic Setup : sets whether to display traf-fic information on map, whether to pro-vide upcoming traffic information voice guidance, and whether to display the detour route popup showing upcoming traffic information. DEFGHIJ
NAVIGATION SYSTEM 3-37NAVIGATION SYSTEMMain setting1.Press the 6(783 key.2.Press the 0DLQ button.3. Select the desired changes and press the 'RQH button to complete. Setting keyboard for inputting letter Press the desired keyboard type button. The selection will be highlighted.  Setting voice command feedback ON/OFFPress the desired setting button.Setting Language1.Press the &KDQJH  button.2. Press the desired language. 3.Press the 'RQH button to complete.  Initializing system1.Press the )DFWRU\'HIDXOW  button.2.Press the menu desired for initialization. 3.Press the <HV butto3-38 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMNavigation setting1. Press  the 6(783 key.2.Press the 1DYLJDWLRQ button.3. Select the desired changes and press the 'RQH button to complete.Setting units (mile/ km)Select the desired distance unit.  Setting arrival time and distance displaySelect the desired setting button. Registering avoid area1.Press the $YRLG$UHD button.2.Press the $GGQHZDYRLGDUHD button.3. Set the start position of the avoid area and press the 1H[W button. 4. Set the end position of the avoid area and press the 1H[W button.5.Press the 'RQH button to complete.
NAVIGATION SYSTEM 3-39NAVIGATION SYSTEM6. If the Avoid area needs to be renamed, press the 5HQDPH button. 7. Rename the Avoid area and Press the 'RQH button to complete. 8. Each time the $YRLG button is pressed, the function will switch between avoid (   )or allow(   ). 9. Press the 'RQH button to complete the set-ting. 3-40 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM Editing avoid area1. Press  the $YRLGDUHD button.2.Press the (GLWDYRLGDUHD button.3.Select the Avoid area button to edit.4. If the Avoid area needs to be renamed, press the 5HQDPH button.5. Rename the Avoid area and press the 'RQH button to complete.6. Each time the $YRLG button is pressed, the function will switch between avoid(   )or allow(   ). 7. Press the 'RQH button once editing is complete.
NAVIGATION SYSTEM 3-41NAVIGATION SYSTEMDeleting avoid area1.Press the $YRLGDUHD button.2.Press the (GLWDYRLGDUHD button.3.Select the $YRLGDUHD button to delete. 4.Press the 'HOHWH button. 5.Press the <HV button.Deleting all avoid areas1.Press the $YRLGDUHD button.2.Press the 'HOHWHDOODYRLGDUHD button.3.Press the <HV button.3-42 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMSetting Q.POI icons1.Press the (GLW432, button.2.Select the desired menu. 3.Select the desired category. 4.Select the desired sub category. 5.Press the  'RQH button to complete.INFORMATIONQ.POI stands for Quick POI and refers to the function which turns POI icon display on or off on the map. Setting estimate travel time1.Press the 7UDYHO7LPH button.      2. Press  the ◀ or ▶ button on the Residential, Main street, and Freeway con-trols to adjust the speed. Press the 'HIDXOW button to set the speeds to the default settings.  3. Press the 'RQH button to complete the set-ting.
NAVIGATION SYSTEM 3-43NAVIGATION SYSTEMMy places setting Registering new address in address bookThere are 3 ways to register a new address in the address book - (a) by DEST menu, (b) by registering address in address book, (c) from map scroll. (a) by DEST menu1.Press the '(67 key.2.Search through the desired method. The search process is the same as the meth-od for destination search.[Searching a destination], page 3-13.3.Press the $GGWR$GGUHVV%RRN button.4. Press the desired address book (user) but-ton. 5. Input the name and telephone information and press the 'RQH button to complete.[Editing an address of address book], page 3-45.(b) by registering in the address book 1.Press the 6(783 key.2.Press the 0\3ODFHV button.3.Press the $GGUHVV%RRN button.4. Press the desired address book (user) but-ton.3-44 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM5.Press the 1HZ$GGUHVV button.6. Press the $GGUHVV button to search the address. [Searching an address], page 3-13.INFORMATION Press  the 6WRUHFXUUHQWSRVLWLRQ button to input the address of the current position. 7. Input the name and telephone information and press the 'RQH button to complete.[Editing an address of address book], page 3-45. (c) from map scroll1. In the map screen, scroll the map to the desired position. 2.Press the $GGWR$GGUHVV%RRN button.3. Press the desired address book (user) but-ton. 4. Input the name and telephone information and press the 'RQH button to complete.[Editing an address of address book], page 3-45.
NAVIGATION SYSTEM 3-45NAVIGATION SYSTEMEditing an address of address book1.Press the 6(783 key.2. Press  the 0\3ODFHV button.3.Press the $GGUHVV%RRN button.4. Select the desired address book (user)  but-ton .5.Select the desired address to edit. 6. Press the 1DPH button to input the address name.7. Input the address name and press the 'RQH button to complete.8. Press the $GGUHVV button to search the address. The process is the same as the method for searching an address.[Searching an Address] , page 3-13.INFORMATIONPress the 6WRUHFXUUHQWSRVLWLRQ button to input the address of the current position.3-46 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM9. Press the 3KRQH button to input the phone number.10. Input the phone number and press the 'RQH button to complete.11.Press the 'RQH button to complete.Deleting an address of address book1.Press the 6(783 key.2.Press the 0\3ODFHV button.3. Press  the $GGUHVV%RRN button.4. Select the desired address book (user) but-ton.5. Select the desired address button to delete. 6.Press the 'HOHWH button.
NAVIGATION SYSTEM 3-47NAVIGATION SYSTEM7.Press the <HV button.Deleting an address book1.Press the 6(783 key.2.Press the 0\3ODFHV button.3. Press  the $GGUHVV%RRN button.4. Press the desired address book (user) but-ton.4.Press the 'HOHWHDOO button. 5.Press the <HV button.3-48 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMRegistering home address1.Press the 6(783 key.2.Press the 0\3ODFHV button.3.Press the +RPH$GGUHVV button.4.Press the 6HDUFK button.INFORMATIONPress the 6WRUHFXUUHQWSRVLWLRQ button to reg-ister the current position as Home.  5.Search the address. The process is the same method as search-ing an address. [Searching an Address], page 3-13.6.Press the 'RQH button to complete.Deleting home address1.Press the 6(783 key.2.Press the 0\3ODFHV button.3. Press  the +RPH$GGUHVV button.4.Press the 'HOHWH button.
NAVIGATION SYSTEM 3-49NAVIGATION SYSTEM5.Press the <HV button.Registering favorite place1. Press  the 6(783 key.2.Press the 0\3ODFHV button.3.Press the )DYRULWH3ODFHV button.4. Press the number of the Favorite Place to register. 5. Press  the 6HDUFK button.INFORMATIONPress the 6WRUHFXUUHQWSRVLWLRQ button to reg-ister the current position as a Favorite place. 6.Search the address. The process is the same as the method for searching an address.[Searching an Address], page 3-13.3-50 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEM7.Press the 'RQH button to complete.Deleting favorite place1. Press  the 6(783 key.2.Press the 0\SODFHV button.3.Press the )DYRULWH3ODFHV button.4. Select the desired favorite place button to delete. 5.Press the 'HOHWH button.6.Press the <HV button.
NAVIGATION SYSTEM 3-51NAVIGATION SYSTEMSystem information and update1.Press the 6(783 key.2. Press the main button. 3. Press the 6\VWHP,QIR button. Voice guidance volume setting1.Press the 6(783 key.2.Press the 9RLFH6HWXS button.Voice guidance volume control● Set the desired volume level by using the ◀ or ▶ buttons and press the /LVWHQ button to verify the volume level. Voice Command1.  Press the   key on the steering wheel remote controller.2.  After the beep sound, say a command.  "Voice Guidance Louder" "Voice Guidance Softer" ● Press the 0XWH button when voice guid-ance is unnecessary. Voice guidance can be turned back on by pressing the ◀ or ▶ buttons or press-ing the 0XWH button. Voice Command1.  Press  the   key on the steering Wheel remote controller.2.  After the beep sound, say a command.  "Voice Guidance On" "Voice Guidance Of"3-52 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMAdaptive volume control ON/OFF● Press the desired setting button. INFORMATIONAdaptive Volume ControlIf the speed of the vehicle is over approxi-mately 60 mi/h (100km/h), the volume level can be increased one level higher than the current level. If the speed of the vehicle falls under 60 mi/h (100km/h), the volume level will return to its original level.Traffic Setup1. Press  the 6(783 key.2.Press the 7UDIILF6HWXS button.3. Select the desired changes and press the 'RQH button. INFORMATION● Display Traffic and Flow data on Map : select  whether to display traffic information on the map. ● Voice Prompt for traffic and flow warning : Decides whether to provide voice guidance in front of Traffic Information. (On route - 3mile)● Display Detour pop-up message : Decides whether to display Detour pop up in front of Traffic Information. (On route - 3mile)Traffic Information(a) Viewing Traffic Information1. When the Traffic option is active, press the  button on the Map screen.Traffic Flow INFORMATION Normal, Free Flowing (46 mph ~)    Moderate Congestion (26 ~ 45 mph)    Heavy Traffic, Stop and Go (0 ~ 25 mph) Road Construction  Accident Congestion/Slow Traffic Incient Hazardous Road Conditions Travel Information
NAVIGATION SYSTEM 3-53NAVIGATION SYSTEMINFORMATION●  Traffic information will be shown on the map up until the scale is ~4mile.● Displays the traffic information around vehi-cle for up to a radius of 50 miles. (Information exceeding 50 miles will not be displayed)● The above list can be sorted by either Distance (Default) or Category.2.Select the desired /LVW button.  3. The user can check points of accidents and traffic details.(b) Changing Traffic Category1.Press the &DWHJRU\6HOHFW button at No. 2.2. After selecting the desired menu among the six menus, press the 'RQH button to save. Once returning to the previous List screen, the corresponding Category list will be shown and maintained until Category information is changed.3-54 NAVIGATION SYSTEMPART 3   NAVIGATION SYSTEMHelp1.Press the 6(783 key.2.Press the +HOS button.3.Press the 1DYLJDWLRQ button.4.Press the desired Help menu button.5. The full content of the help section can be viewed by using the top-down scroll but-tons.
XM DATAXM DATA 4-1PART 4XM DATAXM Data mode  ……………………… 4-2Entering XM Data mode ………………  4-2XM Data mode screen and functions …  4-2Traffic data Service Information  …… 4-2Stock Data Service Information ……… 4-3Sport Data Service Information ……… 4-3Weather data Service Information…… 4-4 4-2 XM DATAPART 4   XM DATAXM Data modeThe XM Data Service is a paid membership satellite radio service which provides users with traffic, stock, sports, and weather infor-mation. However, weather information is not supported for vehicles purchased in Canada. For information on registration or related con-tent, please visit the XM radio website (www.xmradio.com).Entering XM Data mode1. From the current location map screen with-in the navigation, press the ;0'$7$ button.2. The main XM data service screen will be dis-played. Within the main screen, there are four categories of Traffic, Stocks, Sports and Weather.XM Data mode screen and functionsTraffic data Service Information• Automatic route recalculation (guidance) according to changes in traffic conditions.• Provides short-cuts for initially searched routes.• Displays increased detour distance and esti-mated driving times.• Displays icons by each traffic situation on the map.1. Route calculation by incorporating actual road traffic conditions● Incorporation of traffic information to route calculations is a user option which can be turned on or off by the user.2. Displays Road Traffic situations● RTM (Road Traffic Message) is a feature which displays symbols of icons for each type of road traffic condition, such as loca-tions under construction, accidents, basic weather, and others on map locations based on Traffic information provided by XM.
XM DATAXM DATA 4-33. Avoidance of locations where traffic situa-tions have occurred.● If a traffic situation occurs somewhere along the route, the route is recalculated to avoid such locations and an avoidance recalcula-tion popup will be displayed.4. Displays Traffic Event List● A list providing details on accidents and an icon which will display the accident location are displayed. The user can view details by pressing on the list or move the map to the accident location by pressing on the acci-dent icons.Stock Data Service InformationXM Stock data Service is a service which pro-vides real-time updated information on the NYSE, NASDAQ, and AMEX (approximately 11,000 symbols).1. Press the 6WRFNV button to display the Search screen where symbols can be searched. Input the name of the symbol you wish to search and press the /LVW  button to show search results.2. For symbols which you are interested in, press the <Favorites> icon to save the sym-bol as a part of <My Favorite>. Saved sym-bols can be viewed from the  0\)DYRULWHV button on the Stock Main screen.Sport Data Service InformationThis service provides real-time updated infor-mation on scores and schedules for major sports, such as NFL, NBA, NCAA Football, NCAA Basketball, NHL, MLB, NASCAR and more.1. Press the desired 6SRUWV button to view related sports information.4-4 XM DATAPART 4   XM DATA2.My teamsYou can save teams which you are interested in as part of <My teams> to easily view related scores and schedules. Within the <My teams> screen, teams can be added by pressing the $GG button or deleted by pressing the   button. Weather data Service InformationThe Weather Service is a service which pro-vides weather information updated every 5 minutes for your region.The Weather Service includes Tabular Weather, Graphical Weather, Warnings and Advisories Services.1. Tabular Weather Service● Provides current weather information and weather information for the coming next three days for your region.To change the region, press the 2WKHU&LW\ button and select the desired region.2. Graphical Weather Service (0DS button)● This service provides weather information, such as Cloud, Fog, Rain, Snow, and Road Conditions on the Navigation map as sym-bols. Details can be viewed on specific regions by using the zoom in and zoom out features.3.Warning and Advisories Service● This service provides weather warnings and advisories, such as Tornado, Storm, Flood, Winter etc. as symbols on the Navigation map. Details can be viewed on specific regions by using the zoom in and zoom out features.
VOICE COMMAND SYSTEM 5-1VOICE COMMAND SYSTEMPART 5VOICE COMMAND SYSTEM Operating voice command  ………… 5-2Condition for voice command system …… 5-2Basic operation for voice command control  ……………………… 5-2Voice command Help …………………… 5-3Setting up the voice command system  5-4Setting voice Prompt ON/OFF  ………… 5-4Speaker adaptation  …………………… 5-4Voice command list  ………………… 5-6Command list of Audio system ………… 5-6FM/AM Radio ………………………… 5-6XM Radio  …………………………… 5-7CD …………………………………… 5-8MP3 …………………………………… 5-9USB MP3 ……………………………… 5-10USB IMAGE …………………………… 5-10iPod …………………………………… 5-11Others ………………………………… 5-11Command list of Navigation system  ……… 5-12Map …………………………………… 5-12Destination …………………………… 5-14Route ………………………………… 5-15Others ………………………………… 5-16Searching destination by voice command ………………………… 5-19Find address  ………………………… 5-19Find nearest POI ……………………… 5-20Find nearest <POI name>  …………… 5-21Destination POI by phone number  … 5-22Find emergency <Category>   ……… 5-23Destination by address book ………… 5-24Previous destination  ………………… 5-24Previous start point  ………………… 5-25Go home ……………………………… 5-25Destination by memory point <1 to 5>  ……………………… 5-255-2 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMOperating voice command Condition for voice command systemMost of the functions within the AV and Navigation system can be operated by voice. Please follow the following instructions for optimal voice recognition performance. ● Close all windows and the sunroof. The per-formance of the voice recognition can be improved if the environment of the car inte-rior is quiet. ● Press the voice recognition button and say the desired voice command after the sound of the beep.● The microphone is positioned above the driver so that voice commands can be spo-ken while maintaining a proper posture.● Pronounce the voice commands naturally and clearly as if in a normal conversation. Basic operation for voice command control1.  Press  the   key on the steering wheel remote controller. A voice command win-dow will be displayed on the lower side of the screen followed by a "Command please" system voice comment. INFORMATIONThe System voice comment "Command Please" will not be provided when the Voice prompt is turned OFF. 2.  Once  the  icon changes into the  icon on the pop-up screen with a beep sound, say the desired voice command (ex : previ-ous destination)[Voice command list], page 5-6. [Searching destination by voice com-mand], page 5-19.If the exact command is not known, use the "Help" command to view the commands list in detail. INFORMATIONPress the   key shortly to input a voice command from among the system voice com-ments. The system voice instruction comment will immediately terminate. When the   icon changes into the   icon with a beep sound, input the desired voice command.
VOICE COMMAND SYSTEM 5-3VOICE COMMAND SYSTEM3.  The inputted command is fed back to the screen and voice system. If the command was not recognized properly, say "Back". INFORMATION● The commands which can currently be inputted are displayed on the screen in yel-low.● To terminate the voice recognition system, either say "cancel" or press the  for over 0.8  second. ● Be aware that during the operation of the voice recognition system, pressing the hard keys or the screen will terminate the voice recognition system. Voice command Help1.  Press  the   key on the steering wheel remote controller. A voice command win-dow will be displayed on the lower side of the screen followed by a "Command please" system voice comment.INFORMATIONThe System voice comment "Command Please" will not be provided when the Voice prompt is turned OFF. 2.  Once  the   icon changes into the   icon on the pop-up screen with a beep sound, say "Help". If the proper Help menu is already known, voice commands, such as "destination help" can be inputted directly. INFORMATIONThe "help" command can be used even while voice recognition dialogue is operating. At such time, help instructions appropriate to the state of the dialogue will be provided. 3.  Say the name of the desired menu. (ex : "Destination help")4.  Say the desired voice command.5-4 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMSetting up the voice command system Setting voice Prompt ON/OFF● Voice prompt ON : All system prompts are provided. ● Voice prompt OFF : Most of the system prompts are not provided. 1.  Press  the   key on the steering wheel remote controller. 2.  Once the    icon changes into the icon on the pop-up screen with a beep sound, say "Voice setup." The "voice prompt on" or "voice prompt off" can be directly inputted if the current state is already known.3.  Once the  icon changes into the icon on the pop-up screen with a beep sound, say "Voice Prompt on".INFORMATIONIn the Voice Setup Help screen, the com-mands possible for input within the current mode are displayed. For example, if the Voice prompt is currently in Off state, then the com-mand Voice prompt ON will be displayed on the screen. Speaker adaptation 1.  Press  the   key on the steering wheel remote controller.2.  Once  the   icon changes into the  icon on the pop-up screen with a beep sound, say "Voice setup." Or the "Speaker adapta-tion" command can be directly inputted. 3.   Once  the   icon changes into the   icon on the pop-up screen with a beep sound, say "Speaker adaptation".
VOICE COMMAND SYSTEM 5-5VOICE COMMAND SYSTEM 4.   Once the   icon changes into the  icon on the pop-up screen with a beep sound, say "Yes". 5.  Listen and repeat the 20 commands (approximate) as instructed by the device. ● Reset Speaker adaptation: Returns to previ-ous state prior to applying Speaker adapta-tion. 1.   Press  the   key on the steering wheel remote controller.2.  Once  the   icon changes into the   icon on the pop-up screen with a beep sound, say "Reset Speaker adaptation".5-6 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMVoice command list The voice commands for this system are divid-ed into Global commands and Local com-mands. ● Global command (󰥋) : Commands which operate in all operating modes.  ● Local command (󰥊) : Commands which operate only when the corresponding mode is operating or when the mode screen to the corresponding mode is dis-played. Command list of Audio systemFM/AM RadioCommand Operation㿋 Radio  Plays the most recent frequency for the most recently operated band.㿋 (Radio) AM  Plays the most recent frequency for the corresponding band. 㿋 (Radio) FM Plays the most recent frequency for the corresponding band. In the case of FM, the most recent frequency within the most recently played FM1 or FM2 band is played. 㿋 FM <1 or 2>  Plays the most recent frequency for the corresponding band. 㿋 AM frequency <530 to 1710>(ex. AM frequency 1310) Plays the desired AM band frequency. 㿋 FM frequency <87.5 to 107.9>(ex. FM frequency 99.1)  Plays the desired FM band frequency.㿋 AM Preset <1 to 6> Plays the desired AM band preset frequency. 㿋FM <1 or 2> Preset <1 to 6>  Plays the desired preset frequency of FM1 or FM2 band. 㿊 Preset <1 to 6>  Plays the desired preset frequency for the current band. 㿊 Seek Up  Searches and plays the next frequency of the current band.
VOICE COMMAND SYSTEM 5-7VOICE COMMAND SYSTEMCommand Operation㿊  Seek Down  Searches and plays the previous frequency of the current band. 㿊  Preset Up Plays the next preset frequency of the current band. 㿊  Preset Down  Plays the previous preset frequency of the current.㿊  Scan Scans all frequencies within the current band. 㿊  Preset Scan Scans the 6 preset frequencies of the current band. 㿊  Auto Preset / Auto Store  Searches all frequencies within the current band and stores the 6 frequencies with the most superior reception as preset buttons. Command Operation㿋# [P  Plays the last channel within the last band from XM1, XM2, and XM3. 㿋  XM <1 or 2 or 3>  Plays the most recent channel for the corresponding Band. 㿋  XM Channel <0 to 255> Plays the desired XM band channel. 㿋 XM <1 or 2 or 3> Preset <1 to 6> Plays the desired preset channel for XM1 or XM2 or XM3 band. 㿊  Channel < 0 to 255 > Plays the desired channel of the current band.㿊  Preset <1 to 6> Plays the desired preset channel of the current band. 㿊  Channel Up Plays the next channel of the current band. 㿊  Channel Down Plays the previous channel of the current band. XM Radio5-8 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMCommand Operation㿊  Preset Up  Plays the next preset channel of the current band. 㿊  Preset Down Plays the previous preset channel of the current band. 㿊  Scan Scans all channels within the current band. 㿊  Preset Scan Scans all preset channels within the current band.Command Operation㿋DISC Plays the DISC already inserted in the CDP. 㿋CD If the DISC inserted in the CDP is either a CD or MP3 DISC, then the CD or MP3 will be played.㿋CD track <1 to 665>  If the DISC inserted in the CDP is a CD, then CD Mode will start and plays the desired track. 㿊Track <1 to 665> Plays the desired track. 㿊Next track Plays the next track. 㿊Previous track Plays the previous track. 㿊Scan Scans all tracks on the CD DISC. 㿊Repeat track  Repeats the current playing track.㿊Random  Plays the tracks of the CD DISC in random order.㿊Normal play  Turns off the Scan, Repeat, and Random functions. CD
VOICE COMMAND SYSTEM 5-9VOICE COMMAND SYSTEMCommand Operation㿋  DISC Plays the DISC already inserted into the CDP. 㿋  CD  If the DISC inserted in the CDP is either a CD or MP3 DISC, then the CD or MP3 will be played.㿋  MP3  If the DISC inserted in the CDP is an MP3 DISC, then the MP3 will be played. 㿊  Next file Plays the next file. 㿊  Previous file Plays the previous file. 㿊  Next folder Plays the first file in the next folder. 㿊  Previous folder Plays the first file in the previous folder. 㿊  Scan Scans all files within the MP3 DISC. 㿊 Folder Scan  Plays all songs in the folder in which the current playing file is located for 10 seconds each. 㿊  Repeat File  Repeats the current playing file. 㿊  Repeat Folder  Repeats all tracks within the current playing folder. 㿊  Random   Plays all files within the MP3 DISC in random order. 㿊  Random Folder   Plays all files within the current playing folder in random order. 㿊  Normal play Turns off the Scan, Repeat, and Random functions.MP35-10 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMUSB MP3USB IMAGECommand Operation㿋  USB If the USB has been connected to the device, plays the MP3 files within the USB.㿊  Next file Plays the next file..㿊  Previous file Plays the previous file.㿊  Next folder Plays the first chapter of the next folder.㿊  Previous folder Plays the first chapter of the previous folder.㿊  Scan Scans all files within the USB.㿊  Folder Scan Plays all songs in the folder in which the current playing file is located for 10 seconds each.㿊  Repeat File  Repeats the current playing file.㿊  Repeat Folder  Repeats all songs within the current playing folder.㿊  Random  Plays all files within the USB in random order.㿊  Random Folder  Plays all files within the current playing folder in random order.㿊  Normal play Turns off the Scan, Repeat, and Random functions.Command Operation㿋  USB  If the USB IMAGE has been connected to the device, plays the image files within the USB.㿊Next file Moves to the next file. 㿊Previous File Moves to the previous file.
VOICE COMMAND SYSTEM 5-11VOICE COMMAND SYSTEMiPodOthersCommand Operation㿋  iPod  Plays the songs within the iPod if the iPod has been connected to the device. 㿊  Next song Plays the next song. 㿊  Previous song Plays the previous song. 㿊  Repeat song Repeats the current playing song. 㿊  Random  Plays all songs within the iPod in random order. 㿊  Random Album   Plays all songs within the current playing album in random order.㿊  Normal play Turns off the Repeat and Random functions.Command Operation㿋  Line in Plays the unit connected with the AUX terminal.㿋  Audio on Turns on the Audio/Video. 㿋  Audio off Turns off the Audio/Video.Command Operation㿊Next folder Moves to the next folder. 㿊Previous folder Moves to the previous folder. 5-12 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMCommand list of Navigation systemNavigation commands will operate only agreeing to the terms and  conditions for the Navigation system. MapCommand Operation㿋Map Current location Displays the current position of the vehicle.㿋Zoom In  Decreases the map zoom by one level. 㿋Zoom Out  Increases the map zoom by one level. 㿋Zoom minimum  Displays the map screen in the maximum zoom level. 㿋Zoom maximum  Displays the map screen in the minimum zoom level. 㿋Zoom level <1 to 14>  Displays the map in the zoom level selected from the 14 levels. 㿋Zoom <scale factor>  Displays the map in the corresponding zoom.150 feet / 50 meters300 feet /100 meters700 feet / 200 meters0.25 miles / 400 meters0.5 miles / 800 meters1 mile / 1.6 kilometers2 miles / 3.2 kilometers4 miles / 6.4 kilometers8 miles / 12 kilometers
VOICE COMMAND SYSTEM 5-13VOICE COMMAND SYSTEMCommand Operation 16 miles / 25 kilometers32 miles / 50 kilometers64 miles / 100 kilometers130 miles / 200 kilometers250 miles / 400 kilometers(ex.Zoom 0.25 miles, zoom 400 meters)㿊 North up  Displays the map in North Up mode. 㿊 Heading up  Displays the map in Heading Up mode. 㿊 Show <POI name> (ex. Show ATM) Displays the selected POI categories.  [POI Category list], page 5-17.㿊 Hide <POI name> (ex. Hide ATM) Hides the selected POI categories.  [POI Category list], page 5-17.㿊 Hide all Hides all POI categories. 㿊 Daylight mode  Converts the map display into daylight mode. 㿊 Night mode  Converts the map display into night mode. 㿊 Auto mode  Converts the map display is between daylight/night modes automatically.5-14 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMDestinationCommand Operation㿋Find address Sets the destination through address search for route guidance.㿋Find nearest POI Sets a POI near the current position as the destination for route guidance through POI category search.㿋Find nearest <POI name>  Sets a POI near the current position as the destination by directly inputting the POI name for route guidance.  [POI Category list], page 5-17.㿋Destination POI by phone number Sets the destination by searching the phone number of the facility.㿋Find Emergency <Category>(ex. Find Emergency Hospital) Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. 㿋Destination by address book  Sets one of the list of previously registered addresses in the address book for the user as the destination.㿋Previous destination  Sets one of the previous destination as the current destination.㿋Previous start point Sets the previous start point as the current destination.㿋Go home Sets the previously registered home address as the destination for route guidance. 㿋Destination by memory point <1 to 5> Sets a previously registered memory point as the destination for route guidance
VOICE COMMAND SYSTEM 5-15VOICE COMMAND SYSTEMRouteCommand Operation㿋Cancel route Deletes the designated destination and terminates the route guidance.㿋Repeat voice guidance Repeats the route guidance. 㿋Detour <1 or 2 or 5 or 10> miles Searches detour routes within a <1|2|5|10> mile radius. 㿋Detour <1 or 2 or 5 or 10>kilometers Searches detour routes within a <1|2|5|10> kilometer radius. 㿋Replan recommended route Recalculates the route with the recommended route. 㿋Replan shortest route Recalculates the route with the shortest route. 㿋Distance to destination Reports the remaining distance until destination by voice. 㿋Time to destination Reports the remaining time until destination by voice.㿊 View route  If the destination has been set, displays the whole route screen until the destination. 㿊Start guidance Sets the scroll mark displayed on the map as the destination and starts route guidance.5-16 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMOthersCommand Operation㿋Voice guidance on Turns the Voice Guidance On. 㿋Voice guidance off Turns the Voice Guidance Off.㿋Voice guidance louder Increases the Voice Guidance volume by 1 level. 㿋Voice guidance softer Decrease the Voice Guidance volume by 1 level. 㿋Store marked location to <text tag>(ex. Store marked location to user 1) Registers the selected location into the selected Address book.
VOICE COMMAND SYSTEM 5-17VOICE COMMAND SYSTEM●POI Category listAll restaurants Car Wash Home Specialty Store Court HouseFast Food restaurant Motorcycle Dealership Clothing shop Fire DepartmentAmerican restaurant All Travel  Shoe Store Convention CenterFrench restaurant Airport Pharmacy City HallItalian restaurant Hotel All Recreation  Civic CenterContinental restaurant Tourist Information Amusement Park SchoolMexican restaurant Travel Agent Museum Government OfficesJapanese restaurant Tourist Attraction Cinema Waste & SanitaryChinese restaurant City Cnter Sports Activities UtilitiesKorean restaurant Rental Car Agency Sports Complex All ServicesVegetarian Food restaurant Campground Golf Course HospitalSeafood restaurant Ferry Terminal Winery DentistLatin American restaurant Bus Station Video & Game Rental PhotographyAsian restaurant Local Transit Ski Resort Tax ServiceAfrican restaurant Train Station Recreation Area Medical ServiceCoffee Shop  All Shopping Other Recreation AttorneyOther restaurants Department Store All Financial Service Funeral DirectorAll automotive Convenience Store Bank Hair & BeautyGas Station Shopping Center ATM Cleaning & LaundryParking Music Store Check Cashing Service Social ServiceAuto service Grocery Store Money Transfer Physician Road Assistance Bookstore Business Facility Communication servicesHyundai Dealership Electronics Store All Community Tailor & AlterationAutomobile Dealership Hardware Store Police Station Mover servicesAuto Parts Gifts shop Post OfficeRest Area Sporting Goods store Library5-18 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMCommand list of HelpCommand list of PhoneCommand Operation㿋Call Name Makes the call to the name.㿋Dial Number makes the callto the number.㿋Redial The recently called number is redialed.㿋Recent Calls The user can select a number from the outgoing, incoming, and missed calls.Command Operation㿋Help Displays the main Help screen. 㿋Destination Help Displays the Destination related command list.  㿋Map Help Displays the Map related command list. 㿋Radio Help Displays the FM/AM radio related command list. 㿋XM Help Displays the XM radio related command list. 㿋Disc Help Displays the DISC mode related command list for the disc inserted in the CDP.  㿋iPod Help Displays the iPod related Command list. 㿋USB Help Displays the USB related command list. 㿋Phone Help Displays the Phone help screen. 㿋Voice setup Help Displays the Voice prompt settings and speaker-adaptive commands on the screen.
VOICE COMMAND SYSTEM 5-19VOICE COMMAND SYSTEMSearching destination by voice commandFind addressSets the destination through address search for route guidance. 1.   Press the   key on the steering wheel remote controller.2.  Once  the   icon changes into the  icon on the pop-up screen with a beep sound, say "Find address".3.  Say "Change state" to change the state.4.  Say the state name.5.  Say the city name.6.  Say the street name.7.   Say the House number. Here, the range which can be inputted will be displayed. 8.   Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.5-20 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMINFORMACIÓNSpell recognition● It is possible to search the state, city, street names through the text line inputted by the user. ● To enter spell search mode, say the "Spell 000" command as displayed on the screen. ● Text lines can be inputted continuously.Pick-List(n-best list) ● If there are more than one voice result, then a pick-list which can be selected by the user will be displayed. ● There may be more than one list page. The desired page can be viewed by using com-mands such as "next page" or "previous page". ● Here, the "Line + number" voice command can be used to select the desired result, such as "Line one". Pressing the desired result is not supported. ● Also, selectable areas will be highlighted in yellow, allowing the user to easily see which results can be selected. Find nearest POISets a POI near the current position as the destination for route guidance through POI category search. 1.   Press the   key on the steering wheel remote controller.2.  Once  the   icon changes into the    icon on the pop-up screen with a beep sound, say "find nearest POI".3.  Select the desired main category.
VOICE COMMAND SYSTEM 5-21VOICE COMMAND SYSTEM4.  Select the desired sub category. 5.   Select the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1".6.   Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map. Find nearest <POI name> Sets a POI near the current position as the destination by directly inputting the POI name for route guidance.1.    Press  the   key on the steering wheel remote controller.2.   Once  the   icon changes into the  icon on the pop-up screen with a beep sound, say "Find nearest Parking".3.   Select the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1".5-22 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEM4.   Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Destination POI by phone numberSets the destination by searching the phone number of the facility.1.  Press  the   key on the steering wheel remote controller.2.   Once the   icon changes into the  icon on the pop-up screen with a beep sound, say "Destination POI by Phone number".3.   Input  the  10  numbers for the phone num-ber. INFORMATIONContinuous recognition of phone numbers is possible, and the recognized result will be dis-played in block units. To correct a block unit, say "correct". To delete the entire result, say "delete". To have the input read back, say "repeat".4.  Say "Show list" to view the resulting search list.
VOICE COMMAND SYSTEM 5-23VOICE COMMAND SYSTEM5.  Select the desired location from the list and say the line command.6.  Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Find emergency <Category> : Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. 1.  Press  the   key on the steering wheel remote controller.2.   Once the   icon changes into the  icon on the pop-up screen with a beep sound, say the voice command. ex)“Find emergency hospital”3.  Select the desired location from the list and say the line command. 4.   Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.5-24 VOICE COMMAND SYSTEMPART 5   VOICE COMMAND SYSTEMDestination by address bookSets one of the list of previously registered addresses in the address book for the user as the destination. 1.   Press the   key on the steering wheel remote controller.2.   Once the   icon changes into the  icon on the pop-up screen with a beep sound, say "Destination by address book".3.  Select the desired user name(Address book name).4.  Select the desired location from the list and say the line command. 5.  Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Previous destinationSets one of the previous destination as the current destination. 1.   Press the   key on the steering wheel remote controller.2.  Once  the   icon changes into the  icon on the pop-up screen with a beep sound, say "Previous destination".3.   Select the desired location from the list and say the line command.
VOICE COMMAND SYSTEM 5-25VOICE COMMAND SYSTEM4.   Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Previous start point Sets the previous start point as the current destination. 1.   Press the   key on the steering wheel remote controller.2.  Once  the   icon changes into the  icon on the pop-up screen with a beep sound, say "Previous start point".3.   Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Go home Sets the previously registered home address as the destination for route guidance. 1.   Press the   key on the steering wheel remote controller.2.   Once the   icon changes into the  icon on the pop-up screen with a beep sound, say "Go home".Destination by memory point <1 to 5>Sets a previously registered memory point as the destination for route guidance. 1.   Press the   key on the steering wheel remote controller.2.   Once the   icon changes into the   icon on the pop-up screen with a beep sound, say "Destination by memory point 1".PART 6   BLUETOOTH HANDSFREEPART 6BLUETOOTH HANDSFREEBefore using the Bluetooth Handsfree …………………………… 6-2What is Bluetooth? ……………………… 6-2Functions supported by Bluetooth Handsfree  …………………… 6-2Converting Bluetooth Handsfree mode ………………………………… 6-2Converting from AV/Navigation mode to Bluetooth Handsfree mode ……………… 6-2Converting from Bluetooth Handsfree mode to AV/Navigation mode  ………… 6-3Pairing and connecting a Bluetooth phone ………………………………… 6-4Pairing a mobile phone ………………… 6-4Deleting a paired phone  ……………… 6-6 Connecting a mobile phone  …………… 6-7Disconnecting a mobile phone ………… 6-8Bluetooth Handsfree screen layout  6-9Bluetooth Handsfree screen andfunctions ………………………………… 6-9 When there is no mobile phone connected …………………………… 6-9When a mobile phone is connected … 6-9When receiving an incoming call  …… 6-10When already on a call  ……………… 6-10When there is a call waiting   ………… 6-10Making a call ………………………… 6-11Making a call by dialing a phone number ………………………………… 6-11Making a call from Speed Dial  ………… 6-11Making a call by redialing  ……………… 6-12Answering a call  …………………… 6-13Answering an incoming call  …………… 6-13Rejecting an incoming  ………………… 6-13Operating menus during a call  …… 6-14Switching call to the mobile phone  …… 6-14Activating Call waiting  ………………… 6-14Ending a call  …………………………… 6-15Phone Book  ………………………… 6-16Making a call from the Phone book  …… 6-16Searching the Phone Book ……………… 6-17 Searching by name   ………………… 6-17Searching by number   ……………… 6-18Call History List ……………………… 6-19Making a call from Call history  ………… 6-19Sorting call history ……………………… 6-19Dialed number   ……………………… 6-20Received number  …………………… 6-20Missed number  ……………………… 6-20
BLUETOOTH HANDSFREE 6-1BLUETOOTH HANDSFREEPART 6BLUETOOTH HANDSFREEPhone Music  ………………………… 6-21Before playing Phone music  …………… 6-21Starting Phone Music …………………… 6-21Phone music screen layout  …………… 6-22Selecting Phone music files  …………… 6-23Bluetooth settings  ………………… 6-24Pairing and connecting a mobile phone … 6-24Setting mobile phone auto connect priority ………………………………… 6-24Setting Handsfree volume ……………… 6-25Setting Audio streaming  ……………… 6-26Advanced settings ……………………… 6-26 Searching and modifying my device properties  …………………… 6-27Changing passkey    ………………… 6-28Deleting all paired phones  ………… 6-28Important information   …………… 6-30About pairing mobile phones  ………… 6-30About making/answering phone calls  … 6-31About Bluetooth device environment  … 6-31Mobile Phone Compatibility  …………… 6-326-2 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEBefore using the Bluetooth HandsfreeWhat is Bluetooth?● Bluetooth allows wireless transmission of infor-mation between PC, mobile phones, headsets, PDAs, printers and other devices within close ranges by using 2.45Ghz frequency short-dis-tance wireless telecommunication technolo-gies.● Within this vehicle, users can make hands-free calls, transmit mobile phone data, and play audio streaming files by connecting a mobile phone with the system.Functions supported by Bluetooth Handsfree● Pairing mobile phones (Up to 5 phones)● Connecting/disconnecting mobile phones● Making/Answering phone calls● Downloading a Phone Book●Downloading a Call history list● Playing music saved in a Bluetooth phone in the vehicleSome functions may not be supported in some mobile phone. Converting Bluetooth Handsfree modeConverting from AV/Navigation mode to Bluetooth Handsfree mode 1. While in AV mode or Navigation mode, press the 3+21( key or the   key on the steering wheel. Bluetooth is a trademark owned byBluetooth SIG, Inc.
BLUETOOTH HANDSFREE 6-3BLUETOOTH HANDSFREE2. The system will change to Bluetooth Handsfree mode and display the PHONE screen. 3. The following screen will become displayed if no mobile phone has been connected.Converting from Bluetooth Handsfree mode to AV/Navigation mode1. While in Bluetooth Handsfree mode, press an AV/Navigation mode key, such as )0$0 or 0$392,&( .2.The corresponding mode will be displayed.INFORMATIONMost of the functions of the AV or SETUP modes are not supported while on a Bluetooth Handsfree call. The call volume and Navigation (MAPVOICE, DEST, ROUTE) screens can be ope-rated.6-4 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEPairing and connecting a Bluetooth phonePairing a mobile phone1. Press the 6HWWLQJV button on the PHONE screen. 2.  Press  the 3DLULQJV button on the Settings screen. 3. The list of currently paired phones will be displayed.  Press the $GGWR button to pair a new mobile phone.INFORMATIONFor safety reasons, pairing a Bluetooth phone is not possible when the vehicle is in motion. Park the vehicle in a safe location to pair a new phone. It is possible to pair up to five mobile phones. In order to pair a new phone when there are already five mobile phones paired, you must first delete one of the pre-viously paired phones.4. From the Bluetooth device list within the mobile phone, add the car handsfree.  The default name of the car system is SONATA.For more information on registering Bluetooth devices from the mobile phone, please refer to the mobile phone user's manual. INFORMATIONWhile conducting a Bluetooth device search from the mobile phone, operating to another screen will prevent the car handsfree from being found in the mobile phone. Always con-duct searches for Bluetooth devices with the Search Bluetooth device screen displayed.
BLUETOOTH HANDSFREE 6-5BLUETOOTH HANDSFREE5. When pairing the car handsfree from the mobile phone, a passkey input window will become displayed on the mobile phone screen. Input the passkey set within the car system into the mobile phone input win-dow. (The factory state passkey is 0000.) As shown in the figure, once the passkey beco-mes successfully inputted, the Bluetooth connection between the car system and mobile phone will start.6. Once Bluetooth connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth handsfree functions will operate.INFORMATIONSome functions may not be supported due to limited Bluetooth compatibility between the car system and mobile phone. 6-6 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEDeleting a paired phone1. Press  the 6HWWLQJV button on the PHONE screen. 2. Press  the 3DLULQJV  button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to delete from the list and press the 'HOHWH button.4. A pop-up asking whether you wish to dele-te the paired phone will be displayed.  Press  the <HV button to delete the paired phone and the 1R button to cancel.    CAUTION!A mobile phone cannot be deleted if it is currently connected to the car system. To delete the phone, first disconnect the mobile phone and try again.
BLUETOOTH HANDSFREE 6-7BLUETOOTH HANDSFREE Connecting a mobile phone1. Press  the 6HWWLQJV button on the PHONE screen. 2. Press the &RQQHFWLRQV button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to connect from the list and press the  &RQQHFW button. INFORMATIONWhen there are no paired phones, pair the mobile phone through [Settings>Pairings> Add to]. For more information on pairing mobile phones, refer to the user's manual [Pairing and Connecting a Bluetooth phone > Pairing a mobile phone]. 4. The Bluetooth connection between the car system and mobile phone will start.5.  Once Bluetooth connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth handsfree functions will operate.6-8 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREE4. If the connection between the mobile phone and Bluetooth fails, the following pop-up will be displayed. If problems occur while connecting Bluetooth, check for the following conditions.● Whether the mobile phone you wish to con-nect is in the vicinity of the car system● Whether the power of the mobile phone Bluetooth has been turned off● Whether the mobile phone Bluetooth has been set to hidden state● Whether there are Bluetooth compatibility issues between the car system and another mobile phoneDisconnecting a mobile phone1. Press the 6HWWLQJV button on the PHONE screen. 2. Press the &RQQHFWLRQV button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to dis-connect from the list and press the 'LVFRQQHFW button.4. pop-up asking whether you wish to discon-nect the mobile phone will be displayed.  Press  the <HV button to disconnect the mobile phone and the 1R button to cancel.
BLUETOOTH HANDSFREE 6-9BLUETOOTH HANDSFREEBluetooth Handsfree screen layoutBluetooth Handsfree screen andfunctionsWhen there is no mobile phone connected Settings :the user can set environment set-tings for the Bluetooth handsfree, such as pair/delete mobile phone, connect/ dis-connect mobile phone, set call volume, change device name and change passkey.When a mobile phone is connected Phone battery charge status : displays the battery charge status of the connected mobile phone.  The battery charge status may not be displayed in some mobile pho-nes.  Signal strength : displays the mobile phone signal strength. The signal strength may not be displayed in some mobile pho-nes. Bluetooth connection state : becomes dis-played when a Bluetooth phone has been connected with the car system.  Name of connected mobile phone : dis-plays the name of the connected mobile phone.  Phone number input window : displays the inputted phone number. Dial : input the phone number through the dial pad.  SEND : if a number has not been inputted into the phone number input window, then displays the call history list screen. Del : deletes the inputted number one digit at a time.  END : if a number has been inputted, then erases the entire number.  Contacts : displays the phone book screen. The user can search previously saved phone numbers.   6-10 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEWhen receiving an incoming call  Accept : accepts the incoming call.   Reject : rejects the incoming call.When already on a call  Busy icon : when already on a call, displays an icon shaped like a receiver.    Name of incoming caller : displays the name of incoming caller. The name of the incoming caller will not be displayed if the caller's phone number has not been pre-viously registered in the phone book.  Number of incoming caller : displays the number of the incoming caller.   Call state : displays the call state, such as talk time, phone connection, and end time.   END : ends the call.  Private : when talking on the car hands-free, use this function to switch the call to the mobile phone. Press this button and the following screen will be displayed. The speaker and microphone will be switched to the mobile phone.  Mute : use this function to mute the out-going volume.  Pressing the 0XWH button will display the   at the top right side of the screen and the caller will not be able to hear the conversation taking place in the car. Press the 0XWH button again to release the Mute function.When there is a call waiting  Switch : use this button to switch between callers when there are calls on call waiting.  END : use this button to end the calls with all callers.     
BLUETOOTH HANDSFREE 6-11BLUETOOTH HANDSFREEMaking a callMaking a call by dialing a phone number1. Use the number pad on the right side of the PHONE screen to input the number you wish to call.2. Press the 6(1' button or the    key on the steering wheel to make the call.INFORMATIONTo modify, press the 'HO button to delete the inputted number one digit at a time.Press the (1' button or the   key on the steering wheel to cancel the call.Making a call from Speed Dial 1. Use the number pad on the right side of the PHONE screen to input a speed dial num-ber.INFORMATIONOnly speed dial numbers already stored on the mobile phone can be used for speed dial calls. Up to 2-digit speed dial numbers are suppor-ted.6-12 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREE2. Press  the 6(1' button or the   key on the steering wheel to make the call.INFORMATIONFor 2-digit speed dial numbers, press and hold the 2nd digit to make a call to the speed dial number.Making a call by redialing1. Press and hold (over 0.8 second) the 6(1' button on the PHONE screen or the    key on the steering wheel.INFORMATIONRedialing is not possible when there is no call history or the call history list is being down-loaded from the mobile phone. When there is no call history list, the 6(1' button will be inactive.2.The recently called number is redialed.INFORMATIONIt is not possible to display the AV mode and Settings screen when on a phone call. Only the call volume and Navigation (MAPVOICE, DEST, ROUTE) screens can be operated.
BLUETOOTH HANDSFREE 6-13BLUETOOTH HANDSFREEAnswering a callAnswering an incoming call 1. The following screen will be displayed when you receive an incoming call.2. To answer the incoming call, press the  $FFHSW button or the   key on the steering wheel.Rejecting an incoming1. The following screen will be displayed when you receive an incoming call.2. To reject the incoming call, press the  5HMHFW button or the   key on the stee-ring wheel.  The incoming call will be rejec-ted. INFORMATIONUpon receiving a call, the [Reject] function may not be supported in some mobile pho-nes.6-14 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEOperating menus during a callSwitching call to the mobile phone1. If you wish to switch the call to the mobile phone while talking on the car handsfree, press the 3ULYDWH button or press and hold (over 0.8 second) the   key on the stee-ring wheel.2. As shown, the call will be switched to the mobile phone.INFORMATIONIf you wish to switch the call to the car hands-free while talking on the mobile phone, press the 8VHKDQGVIUHH button or press and hold (over 0.8 second) the   key on the steering wheel. The call will be switched to the car handsfree.Activating Call waiting1. If another person calls while already on a call, the following screen will be displayed. 2. Press the $FFHSW  button or the   key on the steering wheel to receive the inco-ming call by switching to the new caller.
BLUETOOTH HANDSFREE 6-15BLUETOOTH HANDSFREE   3. To switch again to the other caller, press the 6ZLWFK button or the   key on the stee-ring wheel. The other call will be received and the previous call will switch back to call waiting. INFORMATIONPress the (QG button or the  key on the steering wheel to end the current call and call waiting.Ending a call1. To end a call, press the (QG button or the   key on the steering wheel.2.The call will be ended.6-16 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEPhone BookMaking a call from the Phone book 1. Press the &RQWDFWV button on the PHONE screen.2.The phone book list will be displayed. INFORMATION● The system may begin to slow down when downloading the phone book in some mobile phones.● Upon connecting a mobile phone, the phone book lists saved in the mobile phone will automatically be downloaded. The phone book download function may not be supported in some mobile phones. 3. Select the number you wish to call from the phone book list and press the 6(1'button.4. The call will be made to the selected num-ber.  INFORMATION●When there are more than 2 numbers saved in one phone number list, if the list is repea-tedly selected, the registered phone num-bers will be displayed sequentially on the list. ●The Mobile Phone/Office/Home categories received via the mobile phone may differ from the information actually stored in the mobile phone.● Select the phone number you wish to con-nect by repeatedly selecting the phone number list and press the 6(1' button to make the call to the selected number.
BLUETOOTH HANDSFREE 6-17BLUETOOTH HANDSFREESearching the Phone Book1. Press the &RQWDFWV button on the PHONE screen.2. Press the 6HDUFK button on the Contacts screen.  3. Phone numbers can be searched by either 6HDUFKE\QDPH or 6HDUFKE\QXPEHU .  From the two methods, select the search method you wish to use.Searching by name 1. Press  the 6HDUFKE\QDPH button on the Phonebook search screen. 2. Input the name you wish to search and press the 'RQH button.3. The search results will be displayed on the screen.6-18 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREESearching by number 1. Press the 6HDUFKE\QXPEHU button on the Phonebook search screen. 2. Input the phone number you wish to search and press the 'RQH button.3. The search results will be displayed on the screen.
BLUETOOTH HANDSFREE 6-19BLUETOOTH HANDSFREECall History ListMaking a call from Call history 1. Press  the 6(1' button on the PHONE screen or press the   key on the steering wheel.  2. The call history list will be displayed. Select the number you wish to call from the call history list and press the 6(1' button.3. The call will be made to the selected num-ber.  Sorting call history 1. The call history can be displayed by sorting the incoming calls, outgoing calls and mis-sed calls.2. When pressing the 'LDOHG, 5HFHLYHG, or  0LVVHG button, the corresponding call his-tory list will be displayed.6-20 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEDialed number Received numberMissed numberINFORMATIONIf there are no entries saved in the 'LDOHG, 5HFHLYHG, or 0LVVHG lists, the corresponding button will be inactive. Up to 20 entries can be saved in each list.
BLUETOOTH HANDSFREE 6-21BLUETOOTH HANDSFREEPhone MusicBefore playing Phone musicMusic saved in the mobile phone can be pla-yed in the car through Bluetooth audio strea-ming.Phone music can be played only when a Bluetooth phone has been connected. To play phone music, connect the Bluetooth phone to the car system. For more information on con-necting Bluetooth, please refer to the user's manual [Pairing and Connecting a Bluetooth phone]. If the Bluetooth is disconnected while playing phone music, the music will be discontinued. The audio streaming function may not be supported in some mobile phones. Only one function can be used at a time bet-ween the Bluetooth handsfree or Phone music function. For example, if you convert to the Bluetooth handsfree while playing Phone music, the music will be discontinued. Playing music from the car is not possible when there are no music files stored in the mobile phone. Starting Phone Music1. Repeatedly press the 0(',$ key on the front panel or the 02'( key on the stee-ring wheel to enter Phone music mode. 6-22 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEINFORMATIONEach press of the 0(',$ key on the front panel will change the function in the order of DISC ĺ USB or iPod ĺ AUX ĺ Phone Music ĺ DISC  ... Each press of the 02'( key on the steering wheel will change the audio mode in the order of FM1 ĺ FM2 ĺ AM ĺ XM1 ĺ XM2 ĺXM3 ĺ DISC ĺ USB or iPod ĺ AUX ĺ Phone Music ĺ FM1...It is not possible to enter Phone music mode if the mobile phone is not connected or if the audio streaming setting within Bluetooth handsfree settings has been set to [Disable streaming audio]. For more information on audio streaming set-ting, please refer to the user’s manual [Bluetooth settings > Setting Audio strea-ming].  2.The Phone music screen is displayed. INFORMATIONWhile music saved in the mobile phone will automatically begin playing after converting to the Phone music screen, this music player function may not be supported in some mobi-le phones. If music does not begin playing even after converting to the Phone music screen, try starting the music directly from the mobile phone.Phone music screen layout Information Bar : displays information for the currently playing song. File Down button : plays the previous song.  Play/Pause button : plays/pauses the song.  File Up button : plays the next song. Sound button : sets the FAD/BAL and BAS/MID/TRE.    
BLUETOOTH HANDSFREE 6-23BLUETOOTH HANDSFREESelecting Phone music files1. Press the  ,   buttons on the Phone music screen or the ѧ6((., 75$&.Ѧ keys on the system.  The previous or next song will be played each time the button or key is pressed.INFORMATIONThe file selection function may not be suppor-ted in some mobile phones. 6-24 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEBluetooth settingsPairing and connecting a mobile phoneFor more information on pairing and connec-ting a mobile phone, please refer to [Pairing and Connecting a Bluetooth phone]. Setting mobile phone auto connect priorityINFORMATIONAfter turning on the car ignition and the sys-tem is booted up, the Bluetooth connection between the car system and mobile phone is automatically made. The Bluetooth connection will be conducted in the order of mobile phone priority. The auto connect priority will be supported only for previously paired mobile phones. 1. Press the 6HWWLQJV button on the PHONE screen. 2. Press the 3ULRULW\ button on the Settings screen. 3. The paired mobile phone list and the mobi-le phone connection priority will be displa-yed.  When wishing to change the priority order, select the mobile phone from the list and use the  ,   buttons to change its priority.  Press  the 'RQH button to save the chan-ged mobile phone priority.
BLUETOOTH HANDSFREE 6-25BLUETOOTH HANDSFREESetting Handsfree volume1.  Press  the 6HWWLQJV button on the PHONE screen. 2.  Press  the 9ROXPH button on the Settings screen. INFORMATIONThe Bluetooth handsfree volume can be adjusted only when a mobile phone has been connected. The 9ROXPH cannot be set if no mobile phone has been connected. Use the  ,   buttons to set the desired volume on the Phone volume screen. Press the 'RQH button to save. INFORMATIONWhile on a call, turning the 32:(5 knob to the left/right or pressing the Ѧ92/ѧ key on the steering wheel will also adjust the call volume.If the call volume is set too high, the loud incoming call bell may cause a traffic accident. 6-26 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREESetting Audio streaming1. Press  the 6HWWLQJV button on the PHONE screen. 2. Press  the 6WUHDPLQJDXGLR button on the Settings screen. 3.Streaming audio setting is selected.INFORMATIONEnable streaming audio: repeatedly press the  0(',$ key or the 02'( key to enter Phone music mode. Phone music can be pla-yed through Bluetooth audio streaming. Disable streaming audio: even if the 0(',$  key or the 02'( key is repeatedly pressed, will not enter Phone music mode. Phone music through Bluetooth audio streaming is not supported. Advanced settingsBluetooth advanced settings can be changed. Enter advanced settings through the following way.1. Press  the 6HWWLQJV button on the PHONE screen. 2. Press  the $GYDQFHGVHWXS button on the Settings screen.
BLUETOOTH HANDSFREE 6-27BLUETOOTH HANDSFREEINFORMATIONFor safety reasons, operation of Advance setup is not possible when the vehicle is in motion. Please park in a safe place to make changes to Advanced setup.3. The Advance setup screen will be displayed. In Advance setup, the following four set-tings can be made. Searching and modifying my device properties1. Press  the 'HYLFHLQIRUPDWLRQ button on the Advance setup screen. 2. Displays the Device information such as the name and address of the car system.  To modify the device name, press the &KDQJHQDPH button.3. Use the key pad to input the Device name you wish to modify. 4. After inputting is complete, press the 'RQH button to save. 6-28 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEChanging passkey  1. Press the &KDQJHSDVVNH\ button on the Advance setup screen.  2. Once the Change passkey screen is displa-yed, input the desired passkey and press the 'RQH button. INFORMATION The passkey is a 4-digit authentication code used for a Bluetooth connection between the mobile phone and car system. The default passkey is set to 0000.Deleting all paired phones1. Press  the 'HOHWHDOOSDLUHGSKRQHV button on the Advance setup screen.  2. A pop-up asking whether you wish to dele-te all paired phone will be displayed. Press the <HV  button to delete all paired pho-nes and the 1R  button to cancel. 3. If <HV button is pressed, all currently pai-red phones will be deleted.
BLUETOOTH HANDSFREE 6-29BLUETOOTH HANDSFREEInitializing Bluetooth handsfree   1. Press the 5HVWRUHIDFWRU\VHWWLQJV button on the Advance setup screen.  2. A pop-up asking whether you wish to initia-lize the Bluetooth handsfree will be displa-yed.  Press  the <HV  button to initialize the Bluetooth handsfree system and the 1R  button to cancel.INFORMATIONUpon initializing the Bluetooth handsfree, the entire paired phone list will be deleted and all Bluetooth related settings will be restored to factory state.3. If <HV is pressed, the Bluetooth handsfree settings will be initialized. 6-30 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREEImportant information About pairing mobile phones   I cannot search for mobile phones through the car system. What is the cause?  Check to see whether the mobile phone you wish to connect supports Bluetooth function. If your mobile phone supports Bluetooth, check to see that whether the Bluetooth settings in the mobile phone have been set to hidden state or if the Bluetooth power has been turned off. If the device has been set to hidden, relea-se the hidden state and if the Bluetooth power has been turned off, turn the power ON and try searching again.  What is the difference between pairing a mobile phone and connecting a mobile phone? Through a two-way passkey between the car system and mobile phones, up to 5 mobile phones can be paired with the car system. The paired mobile phone will remain paired with the car system until the user deletes it manually.  In addition, the call history lists and phone number books saved in each mobile phone will also be maintained until the paired phone is deleted. For more information on pairing mobile pho-nes, please refer to the manual [Pairing and Connecting a Bluetooth phone > Pairing a mobile phone].  Connect a mobile phone to Bluetooth by selecting the desired mobile phone from the paired phones. Within the car system, only one Bluetooth phone can be con-nected at one time. For more informa-tion, please refer to the manual [Pairing and Connecting a Bluetooth phone > Pairing a mobile phone]. What is a Passkey?   A passkey is an authentication code used for two-way authentication of the car sys-tem and the mobile phone.  Only 4-digit numbers can be used as pas-skeys. Passkeys are registered only once when pairing the phone number for the first time. The factory-set passkey is 0000. Q.A.A.A.Q. Q.
BLUETOOTH HANDSFREE 6-31BLUETOOTH HANDSFREEAbout making/answering phone calls How can I answer a call?   When you receive an incoming call, press the   key on the steering wheel or the $FFHSW button on the PHONE screen to answer. To reject the incoming call, press the   key on the steering wheel or the 5HMHFW button on the PHONE screen. What should I do if I am talking on the Handsfree but wish to switch the call to the mobile phone?   To switch the call to the mobile phone, press the 3ULYDWH button on the PHONE screen or press and hold (over 0.8 second) the   key on the steering wheel. If you wish to switch the call back to the car handsfree, press the 8VHKDQGVIUHH button on the PHONE screen or press and hold (over 0.8 second) the   key on the steering wheel. About Bluetooth device environmentWhat is the range for Bluetooth wireless connection?   The wireless connection range is within 10 meters.  How many mobile phones can be paired?  It is possible to pair up to five phones with the car system.  What is the reason why the call quality deteriorates?   First, check to see the signal strength of the mobile phone. The call quality may deteriorate when the signal strength is low. Call quality may also deteriorate if metal objects, such as drink cans, are pla-ced near the mobile phone.  A.Q.A.Q.A.Q.A.Q.A.Q.6-32 BLUETOOTH HANDSFREEPART 6   BLUETOOTH HANDSFREE CAUTION!Mobile Phone CompatibilityDepending on the manufacturer, product and product specification, some mobile phones functions may not be supported or operate abnormally. Carefully read the cautions listed below. ● The occurrence of problems upon using mobile phones may be caused by the mobi-le phone and not by the AV/NAVI.●   Even mobile phones which support Bluetooth function may not operate pro-perly if the mobile phone connection has been locked. Release the connection lock and try connecting the mobile phone with the system again.●   The Mobile phone battery icon and signal strength icon may not be properly displa-yed depending on the type of mobile phone.●   Call waiting is supported only when con-nected to mobile phones which support this feature. The call waiting pop-up may not be displayed in some mobile phones.●  Audio streaming mode will operate only when a Bluetooth phone has been connec-ted. Connecting or disconnecting a Bluetooth phone while audio streaming is operating will stop music play.●    The audio streaming function may not be supported in some mobile phones. ●   The phonebook may take a prolonged period of time to download or may not ope-rate in some mobile phones.The quality of Bluetooth handsfree calls may differ depending on the mobile phone.
PGS (Parking Guide System) 7-1PGS PARKING GUIDE SYSTEMPART 7PGS PARKING GUIDE SYSTEMAbout PGS (Parking Guide System) … 7-2Operating sequence of the PGS  ………… 7-27-2 PGS (Parking Guide System)PART 7   PGS (Parking Guide System)About PGS (Parking Guide System)● PGS System is a safety system which provi-des monitored parking guidance. ● The PGS will operate automatically when the ignition KEY is turned ON and the trans-mission lever is set to R. The PGS will auto-matically stop operating when set to a diffe-rent lever.● The PGS (Parking Guide System) is an optio-nal feature.Operating sequence of the PGS1.  Position the ignition key onto ACC or ON.2.  Position the transmission lever to R.3.  The PGS mode will be displayed on the screen.INFORMATIONGuidance track is as follows :● Red line - 0.5m from the rear bumper● Yellow line - 1.0m from the rear bumper● Blue line - 3.0m from the rear bumper● Red line - Track following left side driver side wheel ●  Yellow line - Track following right side pas-senger side wheel
APPENDIX 8-1APPEINDIXPART 8APPENDIXTroubleshooting guide  …………… 8-2Before thinking the product has malfunctioned ………………………… 8-2Troubleshooting ………………………… 8-3Map legend   ………………………… 8-5Road color  ……………………………… 8-5POI icons ………………………………… 8-5Landmark icons  ………………………… 8-7INDEX ………………………………… 8-88-2 APPENDIXPART 8   APPENDIXTroubleshooting guideBefore thinking the product has malfunctioned1.  Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. 2.  If you are having problems with the device, try the suggestions listed below. 3.  If the problems persist, contact your point of purchase or the nearest service center. Problem FunctionThere are small red, blue, or green dots on the screenBecause the LCD is manufactured with technology requiring high point density, a pixel deficiency or lighting may occur within 0.01% of total pixels.The sound or image is not working● Has the Switch for the vehicle been turned to [ACC] or [ON]?●Has the SYSTEM been turned OFF?The video is being displayed but sound is not working●Has the volume been set to a low level?●Has the volume been set on mute?When the power is turned on, the corners of the screen are dark● The display looking somewhat darker after prolonged periods of use is a normal phenomenon with LCD panels. It is not a malfunction.● If the screen is very dark, contact your point of purchase or the nearest service center.Sound is working from only one speaker  Is the position of FAL/BAL sound controls or volume adjusted to only one side?Sound and video does not work in AUX mode Is the audio and video connector jacks fully inserted into the AUX terminal?The external device is not working  Is the external device connected with a standard connector cable?The road is missing  Some map data may be missing or incorrect. The road name is spoken incorrectly The TTS(Text To Speech) engine speaks the street name based off of the phonetic spelling.  This will continuously be update with the map database.
APPENDIX 8-3APPEINDIXProblem Possible Cause SolutionThe power does not turn on.The fuse is disconnected.  Replace with a suitable fuse. If the fuse is disconnected again, please contact your point of purchase or service center.Device is not properly connected. Check to see that the device has been properly connected. XM only goes throughone category The XM mode is in category. Press the mode button to change to channel mode.The CD does not play.The DISC has not been inserted or has been inserted upside down. Insert the disc properly so that the sides are facing the correct direction. The DISC has been contaminated.  Wipe dirt and other foreign substances from the DISC.The vehicle battery is low.   Charge the battery. If the problem persists, please contact your point of purchase or service center. A disc which is not supported by the device has been inserted.  Insert a disc which is supported for play by the device. The video does not work.  The brightness level has been set to the lowest level. Adjust the brightness to a higher level. The sound does notwork.The volume level is set the lowest level.  Adjust the volume level.   The connector is not properly connected.   Check the connection state. The device is currently fast-forwarding, rewinding, scanning, or playing in slow mode.  The sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode. Troubleshooting8-4 APPENDIXPART 8   APPENDIXProblem Possible Cause SolutionThe sound or video quality is low.  The DISC is dirty or scratched.   Wipe off water or dirt from the DISC. Do not use a disc which has been scratched.  Vibration is occurring from the position in which the conversion switch has been installed.  The sound may be short-circuited and the image distorted if the device begins to vibrate. The device will return to normal operation once the vibration has stopped.  The color and tone quality of the image is low.   Aging of the video display and deterioration in performance may cause certain quality degradations. The USB does not work.  USB memory is damaged.   Please use after formatting the USB into FAT 12/16/32 format.  USB memory has been contaminated.   Remove any foreign substances on the contact surface of the USB memory and multimedia terminal.  A separately purchased USB HUB is being used.  Directly connect the USB memory with the multimedia terminal on the vehicle. A USB extension cable is being used.  Use a standard USB Memory.  A HDD type, CF, SD Memory is being used..  Use a standard USB Memory.  There are no music files which can be played.   Only MP3,WMA file formats are supported. Please use only the supported music file formats. The iPod is not recognized even though it has been connected. There are no titles which can be played.  Use iTunes to download and save MP3 files into the iPod.  The iPod firmware version has not been properly updated.  Use iTunes to update the firmware version and reconnect the iPod with the device.  The iPod device does not recognize downloads.   Reset the iPod and reconnect with the device.
APPENDIX 8-5APPEINDIXMap legend Road colorDay Road Type ColorFreewayArterialCountyCollectorLocalUnpaved localFerryNight Road Type ColorFreewayArterialCountyCollectorLocalUnpaved localFerryNo Category Sub Category Icon1RestaurantsRepresentation2Fast Food3American4French5Italian6Continental7Mexican8Japanese9Chinese10Korean11Vegetarian Food12Seafood13Latin American14Asian15AfricanNo Category Sub Category Icon16RestaurantsCoffee Shop17Others18AutomotiveRepresentation19Gas Station20Parking21Auto service22Road Assistance23Hyundai Dealership24Automobile Dealership25Auto Parts26Rest Area27Car Wash28Motorcycle Dealeship29TravelRepresentation30AirportPOI icons8-6 APPENDIXPART 8   APPENDIXPOI iconsNo Category Sub Category Icon31TravelHotel32Tourist Information33Travel Agent34Tourist Attraction35Popular Spot36Rental Car Agency37Campground38Ferry Terminal39Bus Station40Local Transit41Train Station42Representation43ShoppingDepartment Store44Convenience Store45Shopping CenterNo Category Sub Category Icon46ShoppingMusic Store47Grocery Store48Bookstore49Electronics50Hardware Store51Gifts52Sporting Goods53Home Specialty Store54Clothing55Shoe Store56RecreationRepresentation57Amusement Park58Museum59Cinema60Sports ActivitiesNo Category Sub Category Icon61RecreationSports Complex62Golf Course63Winery64Video & Game Rental65Ski Resort66Recreation Area67Other Recreation68Financial ServiceRepresentation69Bank70ATM71Check Cashing Service72Money Transfer73Business Facility74CommunityRepresentation75Police Station
APPENDIX 8-7APPEINDIXPOI iconsNo Category Sub Category Icon76CommunityPost Office77Library78Court House79Fire Department80Convention Center81City Hall82Civic Center83School84Government Offices85Waste & Sanitary86Utilities87ServiceRepresentation88Hospital89Dentist90PhotographyNo Category Sub Category Icon91ServiceTax Service92Medical Service93Attorney94Funeral Director95Hair & Beauty96Cleaning & Laundry97Social Service98Physician99Communication100Tailor & Alteration101MudanzasNo Category Sub Category Icon1ServiceAirport2Park3Golf4UniversityLandmark icons8-8 APPENDIXINDEXAAbout Bluetooth device environment  … 6-31About making/answering  phone calls ……………………………… 6-31About pairing mobile phones  ………… 6-30About PGS (Parking GuideSystem)  ……… 7-2Activating Call waiting  ………………… 6-14Adaptive volume control ON/OFF ……… 3-52Adding to address book ………………… 3-27Adding waypoints  ……………………… 3-32Adjusting audio volume …………………… 1-7Advanced settings ……………………… 6-26Answering a call ………………………… 6-13Answering an incoming call  …………… 6-13Auto volume control ON/OFF  ………… 1-10AUX ……………………………………… 2-29AUX screen ……………………………… 2-29BBasic operation and setting  ……………… 1-6Basic operation for voice  command control  ………………………… 5-2BASS/MID/TREB ………………………… 1-10Before playing Phone music  …………… 6-21Before thinking the product has  malfunctioned …………………………… 8-2Before using the Bluetooth Handsfree  …… 6-2Bluetooth Handsfree screen and functions  6-9Bluetooth Handsfree screen layout  ……… 6-9Bluetooth settings  ……………………… 6-24CCall History List  ………………………… 6-19CD ……………………………………… 2-14CD ………………………………………… 5-8CD screen and functions  ……………… 2-14Changing destination position  ………… 3-27Changing passkey  ……………………… 6-28Changing Route option ………………… 3-32Changing the map scale   ………………… 3-8Clock Type  ……………………………… 1-12Command list of Audio system …………… 5-6Command list of Help  ………………… 5-18Command list of Navigation system …… 5-12Command list of Phone ………………… 5-18Condition for voice command system  …… 5-2Conditions for voice recognition system  … 1-8Connecting a mobile phone  ……………… 6-7Connecting AUX ………………………… 2-29Connecting iPod device ………………… 2-22Connecting the USB  …………………… 2-28Control panel ……………………………… 1-3Controller and functions  ………………… 1-3Converting Bluetooth Handsfree mode  … 6-2Converting from AV/Navigation mode to Bluetooth Handsfree  ……………………… 6-2Converting from Bluetooth Handsfree mode to AV/ Navigation mode ……………………… 6-3Current position map screen  (without route)  …………………………… 3-5DDaylight Saving Time …………………… 1-12Deleting a paired phone  ………………… 6-6Deleting all avoid areas ………………… 3-41Deleting all paired phones ……………… 6-28Deleting an address book  ……………… 3-47Deleting an address of address book  … 3-46Deleting avoid area  …………………… 3-41Deleting favorite place  ………………… 3-50Deleting home address ………………… 3-48Deleting waypoints  …………………… 3-34
APPENDIX 8-9APPEINDIXDestination ……………………………… 5-14Destination by address book …………… 5-24Destination by memory point <1 to 5> … 5-25Destination menu screen and functions … 3-12Destination POI by phone number  …… 5-22Dialed number  ………………………… 6-20Disc/Content format compatibility  …… 2-12Disconnecting a mobile phone …………… 6-8Display mode …………………………… 1-11Display ON  ……………………………… 1-11Display Photo Frame  …………………… 1-13Display setting  ………………………… 1-11Displaying / Hiding POI icons on the map  … 3-9Displaying the list  ………………………… 1-7Displaying/Hiding Q.POI icons  …………… 3-9EEditing an address of address book  …… 3-45Editing avoid area  ……………………… 3-40Editing waypoints  ……………………… 3-32Ejecting a Disc  ………………………… 2-13Ending a call  …………………………… 6-15Entering XM Data mode …………………… 4-2FFAD/BAL …………………………………… 1-9Find address  …………………………… 5-19Find emergency <Category> …………… 5-23Find nearest <POI name>  ……………… 5-21Find nearest POI ………………………… 5-20Finishing route guidance (Delete Destination) …………………………… 3-30FM/AM Radio  ……………………………… 2-2FM/AM Radio  ……………………………… 5-6FM/AM screen and functions ……………… 2-2For safe and efficient operation ………… 2-10Functions supported by Bluetooth  Handsfree ………………………………… 6-2GGiving voice command  …………………… 1-9Go home ………………………………… 5-25GPS signal reception state ………………… 3-2GPS Time ………………………………… 1-12HHelp ……………………………………… 3-54How to operate menu by voice command … 1-8How to operate the screen menu ………… 1-7IImportant information  ………………… 6-30Important information about this manual … 1-2Initializing Bluetooth handsfree  ……… 6-29Initializing system  ……………………… 3-37Inputting letter by using screen keyboard … 1-7Inserting a Disc  ………………………… 2-13Inserting/Ejecting Disc  ………………… 2-13Introduction ……………………………… 1-2iPod ……………………………………… 5-11iPod screen and functions ……………… 2-23iPod® …………………………………… 2-22LLandmark icons  …………………………… 8-7Limitations of the navigation system  …… 3-2Listening to CD music  ………………… 2-14Listening to iPod music ………………… 2-22Listening to MP3 music ………………… 2-18Listening to the FM/AM radio  …………… 2-2Listening to the XM radio  ………………… 2-6Listening to USB music  ………………… 2-288-10 APPENDIXINDEXMMain setting  …………………………… 3-37Making a call  …………………………… 6-11Making a call by dialing a phone  number ………………………………… 6-11Making a call by redialing  ……………… 6-12Making a call from Call history  ………… 6-19Making a call from Speed Dial  ………… 6-11Making a call from the Phone book  …… 6-16Making a call to POI  …………………… 3-10Map ……………………………………… 5-12Map Functions  …………………………… 3-5Map legend ………………………………… 8-5Missed number  ………………………… 6-20MP3 ……………………………………… 2-17MP3 ………………………………………… 5-9MP3 disc related information and  precaution ……………………………… 2-17MP3 screen and functions ……………… 2-18My places setting  ……………………… 3-43NNavigation setting ……………………… 3-38OOperating after setting a destination  … 3-28Operating external devices  …………… 2-22Operating menus during a call  ………… 6-14Operating sequence of the PGS …………… 7-2Operating the CDP ……………………… 2-10Operating the radio  ……………………… 2-2Operating typical screen menu …………… 1-7Operating USB IMAGE Mode …………… 2-31Operating Variable EQ  ………………… 1-10Operating voice command  ……………… 5-2Others …………………………………… 5-11Others …………………………………… 5-16PPairing a mobile phone …………………… 6-4Pairing and connecting a mobile  phone …………………………………… 6-24Pairing and connecting a Bluetooth  phone ……………………………………… 6-4Phone Book……………………………… 6-16Phone Music  …………………………… 6-21Phone music screen layout  …………… 6-22Playing AUX  …………………………… 2-29POI Category list ………………………… 5-17POI icons …………………………………… 8-5Precaution for safe usage  ………………… 1-2Precautions upon handling discs  ……… 2-10Precautions upon handling USB  ……… 2-26Previous destination  …………………… 5-24Previous start point  …………………… 5-25RReceived number  ……………………… 6-20Registering avoid area  ………………… 3-38Registering favorite place  ……………… 3-49Registering home address ……………… 3-48Registering new address in addressbook …………………………………… 3-43Rejecting an incoming  ………………… 6-13Re-ordering waypoints  ………………… 3-34REW/FF CD track ………………………… 2-15REW/FF iPod song  ……………………… 2-24REW/FF MP3 file ………………………… 2-20Road color  ………………………………… 8-5Route …………………………………… 5-15Route Guidance …………………………… 3-4Route guidance  ………………………… 3-30
APPENDIX 8-11APPEINDIXRoute guidance screen  ………………… 3-28Route menu screen and functions ……… 3-30Route overview (View Entire Route) …… 3-31Route Re-calculation  ……………………… 3-4SScanning CD track  ……………………… 2-16Scanning FM/AM broadcast frequency …… 2-5Scanning MP3 file  ……………………… 2-21Scanning XM broadcast channel  ………… 2-9Scrolling map …………………………… 3-11Searching a Destination ………………… 3-13Searching a POI  ………………………… 3-20Searching a Previous Destination ……… 3-17Searching an Address …………………… 3-13Searching an Intersection  ……………… 3-17Searching and modifying my deviceproperties ……………………………… 6-27Searching by number …………………… 6-18Searching destination by voice  command ……………………………… 5-19Searching favorite places  ……………… 3-26Searching for Emergency facilities  …… 3-25Searching from Address book  ………… 3-24Searching from MAP  …………………… 3-26Searching POI by local POI list  ………… 3-26Searching the Phone Book ……………… 6-17Searching your Home …………………… 3-25Selecting an iPod song  ………………… 2-23Selecting an item in a list  ………………… 1-8Selecting FM/AM broadcast frequency …… 2-3Selecting other route …………………… 3-29Selecting Phone music files  …………… 6-23Selecting the CD track  ………………… 2-14Selecting to MP3 music ………………… 2-19Selecting XM broadcast channel  ………… 2-7Setting a destination  …………………… 3-12Setting arrival time and distance display …………………………………… 3-38Setting as Destination / waypoint ……… 3-27Setting Audio streaming  ……………… 6-26Setting avoid streets on route  ………… 3-35Setting detour distance ………………… 3-35Setting Display OFF  …………………… 1-13Setting estimate travel time  …………… 3-42Setting Handsfree volume ……………… 6-25Setting keyboard for inputting letter  … 3-37Setting Language  ……………………… 3-37Setting mobile phone auto  connect priority  ………………………… 6-24Setting Q.POI icons ……………………… 3-42Setting Random function for CD music … 2-15Setting Random function for iPod song … 2-25Setting Random function for MP3 file  … 2-20Setting Repeat function for CD music  … 2-15Setting Repeat function for iPod song  … 2-25Setting Repeat function for MP3 file …… 2-20Setting the Clock  ……………………… 1-12Setting units (mile/ km) ………………… 3-38Setting up the voice command system …… 5-4Setting voice command feedback  ON/OFF ………………………………… 3-37Setting voice Prompt ON/OFF  …………… 5-4Setup and Information  ………………… 3-36Setup menu screen and functions ……… 3-36Sorting call history ……………………… 6-19Sorting items from list  …………………… 1-8Sound setting ……………………………… 1-9Speaker adaptation  ……………………… 5-4Sport Data Service Information …………… 4-3Starting navigation system  ……………… 3-5Starting Phone Music …………………… 6-218-12 APPENDIXINDEXStarting Route Guidance  ……………… 3-28Starting USB IMAGE Mode ……………… 2-30Steering wheel remote controller ………… 1-5Stock Data Service Information …………… 4-3Storing XM preset  ………………………… 2-9Supported disc formats ………………… 2-11Switching call to the mobile phone  …… 6-14Switching map mode  (North Up / Heading Up)  ………………… 3-6Switching the XM mode  (Channel / Category)  ……………………… 2-7System information and update  ……… 3-51System Power ON  ………………………… 1-6TTime Format  …………………………… 1-12Touch screen beep ON/OFF  …………… 1-10Traffic data Service Information …………… 4-2Traffic Information ……………………… 3-52Traffic Setup  …………………………… 3-52Troubleshooting …………………………… 8-3Troubleshooting guide  …………………… 8-2Turning the Audio ON/OFF  ……………… 1-6Turning the Power OFF  …………………… 1-6Turning the Power ON  …………………… 1-6UUSB ……………………………………… 5-10USB IMAGE Mode  ……………………… 2-30USB IMAGE mode menu screen  configuration …………………………… 2-30USB MP3 ………………………………… 2-26USB MP3 related information and  precaution ……………………………… 2-26VVariable EQ Setup (Optional) …………… 1-10Vehicle position display …………………… 3-3Viewing Current Time …………………… 1-12Viewing detail information for MP3 file … 2-20Viewing GPS signal state  ………………… 3-7Voice command Help ……………………… 5-3Voice command list  ……………………… 5-6Voice guidance volume control ………… 3-51Voice guidance volume setting ………… 3-51WWeather data Service Information ………… 4-4What is Bluetooth? ………………………… 6-2When a mobile phone is connected ……… 6-9When already on a call  ………………… 6-10When receiving an incoming call  ……… 6-10When there is a call waiting  …………… 6-10When there is no mobile phone  connected ………………………………… 6-9XXM Data mode  …………………………… 4-2XM Data mode screen and functions  …… 4-2XM radio …………………………………… 2-6XM Radio …………………………………… 5-7XM screen and functions  ………………… 2-6BASS/MID/TREB #㾕㾕㾕㾕㾕㾕㾕㾕㾕#1-11
MSMicrosoft® Windows® Automotive Operating SystemImportant Safety InformationRead and Follow InstructionsBefore using your Windows Automotive-based system, read and follow all instructions and safety information provided in this end user manual ("User's Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences.Keep User's Guide in VehicleWhen kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Windows Automotive-based sys-tem.  Please make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions and safety information carefully.Warning:Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving.  Stop the vehicle in a safe and legal manner before attempting these operations.  This is important since while setting up or changing some functions you might be required to distract your attention away from the road and remove your hands from the wheel.General OperationVoice Command ControlFunctions within the Windows Automotive-based system may be accomplished using only voice commands.  Using voice commands while driving allows you to operate the system without removing your hands from the wheel.Prolonged Views of ScreenDo not access any function requiring a prolonged view of the screen while you are driving.  Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention.  Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time.Volume SettingDo not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving.  Driving while unable to hear these sounds could cause an accident.Navigation FeaturesAny navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination.  Please make certain all persons using this system carefully read and follow instructions and safety information fully.Distraction HazardAny navigation features may require manual (non-verbal) setup.  Attempting to perform such set-up or insert data while driving can seriously dis-tract your attention and could cause an accident or other serious consequences.  Stop the vehicle in a safe and legal manner before attempting these operations.Let Your Judgment PrevailAny navigation features are provided only as an aid.  Make your driving decisions based on your observations of local conditions and existing tra-ffic regulations. Any such feature is not a substitute for your personal judgment.  Any route suggestions made by this system should never replace any local traffic regulations or your personal judgment or knowledge of safe driving practices.MS
Route SafetyDo not follow the route suggestions if doing so would result in an unsafe or illegal maneuver, if you would be placed in an unsafe situation, or if you would be directed into an area that you consider unsafe.  The driver is ultimately responsible for the safe operation of the vehicle and therefo-re, must evaluate whether it is safe to follow the suggested directions.Potential Map InaccuracyMaps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions.  Always use good judgment and common sense when following the suggested routes.Emergency ServicesDo not rely on any navigation features included in the system to route you to emergency services.  Ask local authorities or an emergency services operator for these locations.  Not all emergency services such as police, fire stations, hospitals and clinics are likely to be contained in the map database for such navigation features.Use of Speech Recognition FunctionsSpeech recognition software is inherently a statistical process which is subject to errors.  It is your responsibility to monitor any speech recognition functions included in the system and address any errors.M & SOFT AMERICA MAP CENTERTEL : 888-757-0010WEBSITE : www.mapnsoft.comMAP AS HOTLINE
MEMOMEMO
MEMO
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ˍ Reorient or relocate the receiving antenna. ˍ Increase the separation between the equipment and receiver. ˍ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ˍ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu