HYUNDAI MOBIS AVN200XMA Car audio bluetooth User Manual HMC BKa E COVER

Download:
Mirror Download [FCC.gov]
Document ID	1138921
Application ID	l+e5PyopfEsb/sCMoQv2/w==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	230.38kB (2879792 bits)
Date Submitted	2009-07-15 00:00:00
Date Available	2009-08-29 00:00:00
Creation Date	2009-07-03 17:57:10
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-07-09 16:07:06
Document Title	HMC_BKa[E]_COVER
Document Creator	PScript5.dll Version 5.2.2
Document Author:	200990_ym_mac

FCC ID: PINAVN200XMA / IC: 4018A-AVN200XM
ATTACHMENT E.
- User Manual -
HCT CO., LTD.
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA
TEL:+82 31 639 8517
FAX:+82 31 639 8525
www.hct.co.kr
Report No. :
HCT-RF09-0706
1/1
Navigation System User’s Manual
Navigation System User’s Manual
Preface
Thank you for purchasing this
Audio Navigation System.
This user's manual explains how to
use the Hyundai Motor Audio
Navigation System.
Before using the product, read the
contents of this user's manual carefully and use this product safely.
iPod
iPod is a registered trademark of
Apple Inc.
Bluetooth
Bluetooth is a trademark owned
by Bluetooth SIG, Inc.
The screens shown in this manual may differ with the actual
screens of the product.
The design and specification of
this product may change without
prior notification for product
improvement.
When transferring the vehicle to
another individual, include this
user's manual so that the next
driver can continue its use.
Copyright(c) 2009 by NAVTEQ. All Map Database cannot be copied without permission.
This is protected by U.S. copyright laws. All rights not expressly granted are reserved.
You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent.
Table of contents
PART 1
PRE-OVERVIEW
PART 3
NAVIGATION SYSTEM
Introduction
1-2
Controller and functions
1-3
Basic Operation and setting
1-7
Limitations of the navigation
system
Starting navigation system
Map Functions
PART 2
AUDIO SYSTEM
Operating the radio
2-2
Operating the CDP
2-10
Operating external devices
2-22
PART 4
VOICE COMMAND SYSTEM
3-5
3-5
Setting a destination
3-12
Operating after setting
a destination
3-28
Route guidance
3-30
Setup and Information
3-36
4-2
Setting up the voice command
system
4-4
Voice command list
4-6
PART 7
APPENDIX
PART 1
PRE-OVERVIEW
Bluetooth settings
5-24
Troubleshooting guide
7-2
Introduction
1-2
5-30
Map legend
7-5
Important information about this
manual
Precaution for safe usage
How to operate menu by
voice command
Important information
1-2
1-2
INDEX
7-8
Controller and functions
1-3
Control panel
Steering wheel remote controller
HVAC System
1-3
1-4
1-6
Basic Operation and setting
1-7
Turning the power ON
Turning the power OFF
Turning the Audio ON/OFF
Adjusting audio volume
How to operate the screen menu
Operating typical screen menu
1-7
1-7
1-7
1-8
1-8
1-8
Conditions for voice recognition
system
Giving voice command
Sound setting
FAD/BAL
BASS/MID/TREB
Auto volume control ON/OFF
Touch screen beep ON/OFF
Display setting
Display mode
Brightness
Display OFF
Display ON
5-2
Converting Bluetooth Handsfree
mode
5-2
Pairing and connecting a Bluetooth
phone
5-4
PART 6
HVAC MODE
Bluetooth Handsfree screen
layout
Cautions upon operating HVAC
mode
6-2
5-9
Making a call
5-11
HVAC mode screen layout
6-2
Answering a call
5-13
HVAC System operations
6-3
Operating menus during a call
5-14
Phone Book
5-16
Call History List
5-19
PHONE MUSIC
5-21
Inputting letters by using screen
keyboard
Displaying the list
Selecting an item in a list
Sorting items from the list
PRE-OVERVIEW
PART 5
BLUETOOTH HANDS FREE
Before using the Bluetooth
Handsfree
Operating voice command
3-2
1-9
1-9
1-10
1-10
1-10
1-11
1-11
1-11
1-11
1-11
1-11
1-11
1-11
1-8
1-8
1-9
1-9
PRE-OVERVIEW 1-1
PART 1 PRE-OVERVIEW
1-2 PRE-OVERVIEW
Controller and functions
CD/AUX
Control panel
following order: DISC(CD, MP3)
(AUX)
Phone Music
(USB or iPod)
DISC(CD, MP3)
SETUP
Displays the Setup menu screen.
DISC eject
Ejects the inserted disc.
TUNE knob
- FM/AM Mode : Turn the knob to search for
the desired frequency. Press the knob to
receive the selected frequency.
- XM Mode : Turn the knob to search for the
desired channel. After a brief moment, the
selected channel will be displayed.
Power / Volume control knob
- CD Mode : Turn the knob to search for the
AM/FM
Push knob (over 0.8 second) : Turns the
Each press will change the bands in the
power off.
following order: FM1
FM2
AM
FM1
selected track.
- MP3, USB Mode : Turn the knob to search
Push knob (under 0.8 second) : Each time the
knob is pressed, the Audio is turned on and
desired track. Press the knob to play the
for the desired file.
XM
off.
Each press will change the bands in the
Tune knob : The range of volume adjustment
following order: XM1
XM2
XM3
Press the knob to play the selected file.
XM1
is between 0 ~ 35.
PRE-OVERVIEW 1-3
PRE-OVERVIEW
Each press will change the bands in the
PART 1 PRE-OVERVIEW
- iPod Mode : Turn the knob to search for
the selected song.
- XM Mode : Quickly moves to the previous
Steering wheel remote controller
or next channel.
Press this key when the Power is turned off
track.
PHONE
Displays the Bluetooth handsfree screen.
playing file.
Increases or decreases the volume within a
and voice guidance can be adjusted in the
Displays the map screen for the current
position.
channel.
DEST
Displays the Destination menu screen.
- iPod Mode : Plays the previous or next
Displays the Route menu screen.
song.
LONG KEY(over 0.8 second)
- FM/AM Mode : Quickly moves through the
DISC insert indicator LED
Displays whether a DISC has been inserted.
SHORT KEY(less than 0.8 second)
Press this key to receive an incoming call. If
- FM/AM : Receives the previous or next
pressed while in AV/Navigation mode, the
preset frequency.
Mode
ROUTE
song.
CALL
Seek Up/Down
- MP3, USB Mode : Plays the previous or
next file.
playing file.
- iPod Mode : REW/FF the current playing
setup mode.
- XM Mode : Receives the previous or next
- CD Mode : Plays the previous or next track.
- MP3, USB Mode : REW/FF the current
range between 0 ~ 35. Volume for navigation
MAP
and starts playing.
track.
Volume Up/Down
song.
the previous or next broadcast frequency
or next channel.
- CD Mode : REW/FF the current playing
- MP3, USB Mode : REW/FF the current
SHORT KEY(less than 0.8 second)
- FM/AM Mode : Automatically searches for
broadcasts which can be received.
- XM Mode : Quickly moves to the previous
to turn the power on.
- iPod Mode : REW/FF the current playing
SEEK/TRACK Up/Down
Once released, automatically searches for
Press this key for over 0.8 second to turn the
Audio ON and OFF.
- CD Mode : REW/FF the current playing
PRE-OVERVIEW
the desired song. Press the knob to play
Each time the Mode key is pressed, the mode
changes in the following order: FM1
FM2
- CD Mode : Plays the previous or next track.
(USB or
- MP3, USB Mode : Plays the previous or
If an unsupported DISC is inserted, if there is
- iPod Mode : Plays the previous or next
iPod)
(AUX)
XM2
XM3
Phone Music
(DISC)
FM1
Starts Voice Recognition.
END
next file.
song.
frequencies while the button is pressed.
no disc, or if an external device (e.g. iPod, USB
Once released, automatically searches for
memory stick, etc.) has not been connected,
LONG KEY(Over 0.8 second)
broadcasts which can be received.
the mode will not be recognized and
- FM/AM Mode : Quickly moves through the
automatically switch to the next mode.
Voice Recognition
preset channel.
AM
XM1
bluetooth handsfree screen will be displayed.
- XM Mode : Receives the previous or next
Press this key to reject an incoming call.
If pressed while on a call, then the call will be
ended.
frequencies while the key is pressed.
1-4 PRE-OVERVIEW
PRE-OVERVIEW 1-5
PART 1 PRE-OVERVIEW
HVAC
System
- iPod
Mode
: Turn the knob to search for Sets
Front
Basic operation and setting
System Power ON
Turning the Power ON
second, a beep will sound and the system
Turn the ignition key onto ACC or ON. If the
Rear
power will be turned off.
system power had been on when the
The rear window defroster is turned ON/OFF.
ignition was turned off, the system will turn
When the defroster is operating, the LED on
back on automatically.
Turning the Audio ON/OFF
Press the PWR/VOL knob for under 0.8
the display window and at the top of the
switch will turn on.
second with the system power on to turn the
If the system power had been off when the
ignition was turned off, the system will
A/C
Turns the air conditioner ON/OFF.
FAN
Sets the fan level.
OFF
Turns the HVAC system off.
MODE
Sets the fan mode.
CLIMATE
Displays the general status of the HVAC
TEMP
Raises or lowers the driver-side temperature.
Audio on and off.
INFORMATION
remain off. In this case, press the
PWR/VOL knob to turn on the system
As system booting starts from the point the
power.
complete booting before the ACC is turned
on or the PWR/VOL knob is pressed.
door lock is unlocked, the device may
Consequently, the booting screen may not be
displayed upon initially turning on the system
2. After the beep sound, say a command.
"AV On"
"AV Off"
INFORMATION
Once system booting is complete, the most
Conducting the following operations while
Turns the heating/cooling auto function
recent operated mode will be displayed.
the AUDIO is off will automatically turn on the
Audio system.
Pressing the AV related keys ( AM/FM ,
, CD/AUX ).
AUTO
ON/OFF. When using AUTO, the cabin
For example, turning on the system will
Switches the air intake mode to recirculation
temperature is set to a proper level by
display FM1 radio mode if the last operated
or exterior mode.
calculating the outside temperature through
mode prior to turning off the system had
a temperature sensor.
been FM1 radio mode.
Air mode
key on the steering wheel
remote controller.
power.
system, such as temperature, outside
temperature, fan mode, and fan level.
Voice Command
1. Press the
Inserting a DISC or connecting an external
device.
1-6 PRE-OVERVIEW
PRE-OVERVIEW 1-7
PRE-OVERVIEW
towards the front window.
Turning the Power OFF
If the PWR/VOL knob is pressed for over 0.8
Removes humidity and frost by blowing fan
PART 1 PRE-OVERVIEW
Adjusting audio volume
knob in clockwise
The current operated button will be
Delete
Buttons which cannot be operated under
clockwise to decrease the volume.
the current conditions will be displayed in
INFORMATION
Selecting an item in a list
Sorting items from list
Pressing for over 0.8 second will delete
all content.
Done : The input is completed.
inputted text will not be saved.
will not perform any operation.
How to operate menu by voice
command
Conditions for voice recognition
system
: Restores to previous screen. The
disabled state. Pressing a disabled button
: Deletes the previously inputted letter.
highlighted upon display.
direction to increase the volume and counter-
Most of the functions within the AV and
The range of volume adjustment is
Navigation system can be operated by voice.
Inputting letter by using screen
keyboard
between 0 ~ 35.
Adjustments to the volume cannot be
Displaying the list
Please follow the instructions below for
optimal voice recognition performance.
made while the AUDIO is turned off.
How to operate the screen menu
Press the
Operating typical screen menu
: Moves to the next page or previous
Select the desired sorting method to
page.
: The
reorganize the list in accordance to the
Close all windows and the sunroof. The
selected method.
voice recognition can be improved when in
button will be displayed if
the text is too long to be displayed
a quiet environment.
in one button.
button to move the cursor to
Press the voice recognition button and say
the end of the text. Press the
If a menu button on the screen is pressed,
List
the corresponding function will begin
: Even if input is not complete, the
the desired voice command after the sound
button to
of the beep.
move the cursor to the front of the text.
The microphone is positioned above the
: Displays the English alphabet keypad.
current matching items from the
driver so that voice commands can be said
The same menu button may perform
: Displays the French alphabet keypad.
database will be displayed.
while maintaining a proper posture.
different functions depending on the length
(if available)
0 - 9 : Displays the number and symbol
ABC
operation.
of time the button is pressed (under 0.8
PRE-OVERVIEW
Turn the PWR/VOL
seconds or over 0.8 second).
keypad.
Pronounce the voice commands naturally
INFORMATION
and clearly as if in normal conversation.
The number at the upper-right side of the
For more information, refer to the specific
screen displays the number of current
function within this user manual.
matches.
1-8 PRE-OVERVIEW
PRE-OVERVIEW 1-9
PART 1 PRE-OVERVIEW
Giving voice command
INFORMATION
Sound setting
BASS/MID/TREB
Press the Sound button on the main screen
of each AV mode (FM/AM, XM, CD, MP3, USB,
The BASS/MID/TREB can be adjusted by using
the left/right buttons (
) of each
comment will immediately terminate. When
the
icon changes into the
icon with a
iPod) to display the Sound setting screen.
control.
Display setting
Automatic
Press the SETUP key on the control panel to
The display is automatically converted
display the Setup menu screen.
between Daylight and Night modes in
accordance to the on/off state of the
vehicle taillights.
Daylight
Auto volume control ON/OFF
beep sound, it is possible to input voice
commands.
Each time the Auto volume control button is
The bright screen is always maintained
pressed, the Auto volume control function is
regardless of the on/off state of the vehicle
turned on or off.
taillights.
Night
Press the
key on the steering wheel
remote controller.
A voice command window will be displayed
on the lower side of the screen followed by a
"Command please" system voice comment.
Once the
icon changes into the
icon on the pop-up screen with a beep
sound, say the desired voice command.
[Voice command list], page 4-6.
FAD/BAL
The position of the sound can be adjusted by
using the up-down and left-right (
INFORMATION
The dark screen is always maintained
The Auto Volume Control is a function which
Press
automatically adjusts the volume level in
Setup screen.
Display
button to display the Display
regardless of the on/off state of the vehicle
taillights.
accordance to changes in vehicle speed.
Brightness
Use the left/right buttons (
Touch screen Beep ON/OFF
) buttons on the left side of the
Each time the Touch screen beep button is
screen.
Press the Default button to position the
pressed, the beeping sound that follows each
press on the screen will turn on or off.
) for
control to make adjustments.
Display OFF
Press the Display Off button.
sound in the center of the vehicle.
[Searching a destination by voice
command], page 4-19.
Display mode
Press the button for the desired display mode
from Automatic , Daylight , and Night
Display ON
Press anywhere on the black screen. The screen
prior to display setting will be displayed.
modes. The current selected mode is
highlighted.
1-10 PRE-OVERVIEW
PRE-OVERVIEW 1-11
PRE-OVERVIEW
key shortly to input the desired
voice command. The system voice instruction
Press the
PART 2 AUDIO SYSTEM
PART 2
AUDIO SYSTEM
PART 2
AUDIO SYSTEM
2-2
Operating the CDP
FM/AM Radio
Listening to the FM/AM radio
FM/AM screen and functions
2-2
2-2
2-2
Selecting FM/AM broadcast
frequency
Storing FM/AM preset
2-3
2-4
Scanning FM/AM broadcast
frequency
XM Radio
Listening to the XM radio
XM screen and functions
2-5
2-6
2-6
2-6
About CDP
Precautions upon handling discs
For safe and efficient operation
Supported disc formats
Disc/Content format compatibility
Inserting/Ejecting disc
Inserting a disc
Ejecting a disc
CD
Listening to CD music
CD screen and functions
Selecting the CD track
REW/FF CD track
Switching the XM mode
(channel/category)
Selecting XM broadcast channel
Storing XM preset
Scanning XM broadcast channel
2-7
2-7
2-9
2-9
2-10
2-10
2-10
2-10
2-11
2-12
2-13
2-13
2-13
2-14
2-14
2-14
2-15
2-15
Setting repeat function for
CD music
2-15
Setting random function for
CD music
Scanning CD track
MP3
2-16
2-16
2-17
MP3 screen and functions
Selecting the MP3 file
REW/FF MP3 file
2-18
2-19
2-20
Viewing detail information for
MP3 file
2-20
Setting repeat function for
MP3 file
2-20
Setting random function for
MP3 file
Scanning MP3 file
2-20
2-21
MP3 disc related information and
precaution
2-17
Listening to MP3 music
2-18
Operating external devices
2-22
iPod
Connecting iPod device
Listening to iPod music
iPod screen and functions
Selecting an iPod song
REW/FF iPod song
2-22
2-22
2-22
2-23
2-23
2-24
Setting repeat function for
iPod song
2-25
Setting random function for
iPod song
USB
2-25
2-26
USB MP3 related information and
precaution
Precautions upon handling USB
Connecting the USB
Listening to USB music
AUX
Connecting AUX
Playing AUX
AUX screen
2-26
2-26
2-28
2-28
2-29
2-29
2-29
2-29
AUDIO SYSTEM
Operating the radio
AUDIO SYSTEM 2-1
PART 2 AUDIO SYSTEM
Operating the radio
Voice Command
1. Press the
FM/AM Radio
FM/AM screen and functions
key on the steering wheel
remote controller.
There are 3 ways to select the broadcast
frequency - (a) selecting through preset, (b)
Program Service name: Displays the
transmitted from the broadcast station.
If the R-Text is on ON state, the frequency
selecting through SEEK, (c) selecting
program service name if data is being
broadcast.
bar will not be displayed. Even if the
(a) Selecting a frequency through preset
"(Radio) FM"
Frequency: Displays the current playing
in on ON state, text may not be displayed if text
Press the preset button of the desired
"(Radio) FM <1 or 2>"
frequency.
is not being received from the broadcast
broadcast frequency.
"AM Frequency <530 to 1710>"
Program type name: Displays the
station.
"FM Frequency <87.5 to 107.9>"
program type name if data is being
"AM Preset <1 to 6>"
broadcast.
"FM <1 or 2> Preset <1 to 6>"
Radio Text: Displays the radio text
frequencies with the most superior
steering wheel remote controller shortly. The
information if data is being broadcast.
reception and automatically stores as
preset frequencies of the current band will be
Frequency Bar : Displays the position of
preset buttons in corresponding order.
[Storing FM/AM preset], page 2-4.
selected in order.
recent listened station will be displayed.
Press the AM/FM key to change the
Preset
desired radio band. Each press will
Mode display : Displays the FM1/FM2/
change the bands in the following order:
AM modes.
FM1
SEEK/SCAN/PRESET SCAN/AUTO PRESET
page 2-3.
indicator : If SEEK/SCAN/PRESET SCAN
buttons : The desired frequency
can be preset and selected.
[Storing FM/AM preset], page 2-4.
R-Text
ON/OFF button : Turns the
Radio Text information on and off.
R-Text
through manual search.
Autopreset
Scan
button : Searches the 6
button : Scans all frequencies
or just the preset frequencies for 5
seconds each.
[Scanning FM/AM
INFORMATION
Press the SEEK
or TRACK
keys on the
There are 6 preset frequencies each for
FM1, FM2, and AM modes.
[Storing FM/AM preset], page 2-4.
Voice Command
broadcast frequency], page 2-5.
Sound button : Adjusts the FAD/BAL,
1. Press the
BASS/MID/TREB controls.
[Sound setting], page 1-10.
2. After the beep sound, say a command.
key on the steering wheel
remote controller.
/AUTO PRESET is operating, the switch is
"Preset <1 to 6>"
displayed.
"Preset Up"
"Preset Down"
2-2 AUDIO SYSTEM
AUDIO SYSTEM 2-3
AUDIO SYSTEM
frequency range.
FM1
R-Text
"(Radio) AM"
the current frequency within the total
AM
Selecting FM/AM broadcast frequency
is on OFF state, text will not be
displayed even if there is text being
panel. The FM/AM radio band of the most
FM2
INFORMATION
If the
indicator is displayed.
Press the AM/FM key on the control
Select the desired broadcast frequency.
[Selecting FM/AM broadcast frequency],
frequency is a stereo broadcast, the
" Radio"
2. After the beep sound, say a command.
Listening to the FM/AM radio
STEREO indicator : If the current
PART 2 AUDIO SYSTEM
(b) Selecting a Broadcast frequency
through SEEK
Press the SEEK
or TRACK
keys on the
Scanning FM/AM broadcast
frequency
Press the
modes can be stored using the above
Press the
scan will be terminated and the current
instructions.
(c) Selecting a broadcast frequency through
indicator blinking), the next or previous
manual search
Turn the TUNE knob on the control panel in
clockwise or counter-clockwise direction.
Each click on the TUNE knob will increase or
INFORMATION
Press the SEEK
decrease the frequency by 1 step (FM: 0.2
or TRACK
keys on the
After selecting the desired band, press the
Auto preset button. The 6 frequencies with
seconds each.
the most superior reception will be stored as
preset buttons in corresponding order.
INFORMATION
When scanning has completed an entire
revolution, the scan function will terminate
Voice Command
1. Press the
automatically and the previous played
key on the steering wheel
frequency will be restored.
remote controller.
Storing FM/AM preset
INFORMATION
2. After the beep sound, say a command.
If the Auto preset button is pressed again
There are 2 ways to store preset frequencies -
while operating Auto Store, then the Auto
(a) storing manually and (b) auto store.
Store operation will be terminated and the
next frequency with superior reception will
previously played frequency will be restored.
Select the desired frequency.
[Selecting FM/AM broadcast frequency],
control panel again will terminate SEEK
page 2-3.
operation and select the current frequency.
Press the preset button to store for over
"Scan"
PRESET SCAN (over 0.8 second):
Scans the 6 frequencies stored as preset
frequencies in the current band for 5
(a) Storing manually
If the SEEK function is operating, pressing
the SEEK
or TRACK
keys on the
Voice Command
1. Press the
seconds each.
key on the steering wheel
remote controller.
0.8 second. The frequency will become
Voice Command
frequency will continue to be played.
SCAN (less than 0.8 second) :
frequencies with superior reception for 5
frequency. Once the button is released, the
1. Press the
button again to
Scans all frequencies and plays only
quickly move to the nearest desired
be searched automatically.
Scan
continue listening to a frequency. The
button.
(b) Auto Store
MHz, AM: 10 kHz).
control panel or steering wheel remote
controller for more than 0.8 second to
Scan
AUDIO SYSTEM
Once the SEEK function is operating (SEEK
will be searched automatically.
INFORMATION
Six preset frequencies each for FM1/ FM2/AM
"Seek Down"
control panel for less than 0.8 second.
broadcast frequency with superior reception
"Seek Up"
2. After the beep sound, say a command.
2. After the beep sound, say a command.
Voice Command
1. Press the
"Auto preset"
stored along with a beep sound.
key on the steering wheel
remote controller.
key on the steering wheel
2. After the beep sound, say a command.
"Preset Scan"
remote controller.
2-4 AUDIO SYSTEM
AUDIO SYSTEM 2-5
PART 2 AUDIO SYSTEM
Voice Command
XM radio
1. Press the
Listening to the XM radio
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
Channel number : Displays the current
playing channel.
Channel mode indicator : Displays the
channel mode in orange.
button : Selects the channel by
selecting with channel Up/Down, (c)
"Preset <1 to 6>"
(d) selecting through channel/ category list,
"Preset Up"
"XM Channel <0 to 255>"
Channel name : Displays the channel
each.
(e) selecting by directly inputting the
"XM <1 or 2 or 3> Preset <1 to 6>"
name.
[Scanning XM broadcast channel],
related information.
page 2-9.
Sound button : Adjusts the FAD/BAL,
(a) Selecting a channel through preset
(b) Selecting with Channel Up/Down
Press the SEEK
or TRACK
keys on the
Title name : Displays the title name.
BASS/MID/TREB controls.
Press the preset button of the desired
control panel for less than 0.8 second.
channel.
The previous or next channel will be selected.
[Sound setting], page 1-10.
name.
Preset
buttons : The desired channel
can be preset and selected.
key to change the
desired radio band. Each press will
change the bands in the following order:
XM1
Mode display: Displays the XM1/XM2/
2-7.
"Preset Down"
channel number.
[Storing
Switching the XM mode (Channel /
Category)
Press the SEEK
or TRACK
INFORMATION
keys on the
If in Channel mode, the channel is selected
steering wheel remote controller for less
from all channels. If in Category mode, the
than 0.8 second. The preset channels of the
XM preset], page 2-9.
Mode buttons : Switches between
Each time the
the mode will switch between channel
current band will be selected in order.
first channel of each category is selected.
Press the SEEK
or TRACK
keys on the
channel mode and category mode.
[Switching the XM mode], page 2-7.
mode and category mode.
There are 6 preset channels each for XM1,
control panel or steering wheel remote
Use the tune knob to change categories
XM2, and XM3.
[Storing XM preset], page 2-9.
controller for more than 0.8 second to
List
button : Displays the channel or
XM3 modes.
category list.
[Selecting XM broadcast
SCAN/PRESET SCAN indicator: If
channel], page 2-7.
Mode
button is pressed,
INFORMATION
and press the tune knob change to selected
category.
quickly move to the nearest desired
channel. Once the button is released, the
current channel will be selected.
SCAN/PRESET SCAN is operating, the
switch is displayed.
2-6 AUDIO SYSTEM
AUDIO SYSTEM 2-7
AUDIO SYSTEM
Selecting a channel through manual search,
or just the preset channels for 5 seconds
recent listened station will be displayed.
Select the desired broadcast channel.
[Selecting XM broadcast channel], page
2. After the beep sound, say a command.
category mode in orange.
key on the control panel.
XM3
key on the steering wheel
remote controller.
Category mode indicator: Displays the
The XM radio band screen of the most
XM2
1. Press the
"XM <1 or 2 or 3>"
Category name : Displays the category
XM1
channel - (a) selecting through preset, (b)
"XM"
XM screen and functions
Press the
Voice Command
Selecting XM broadcast channel
There are 5 ways to select a broadcast
page 2-7.
Scan button : Scans all frequencies
NAME : Displays the artist and other
Press the
Search
directly inputting the channel number.
[Selecting XM broadcast channel],
PART 2 AUDIO SYSTEM
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
Storing XM preset
(d) Selecting channel through channel/
category list
List
Press the
2. After the beep sound, say a command.
Select the desired channel.
button.
[Selecting
"Scan"
XM broadcast channel], page 2-7.
PRESET SCAN (over 0.8 second): Scans the
If in category mode, the all category list
screen will be displayed.
Press the preset button for over 0.8
6 preset channels within the current band
"Channel Down"
Select the desired category button to
second. The frequency will be saved
for 5 seconds each.
display the channel list screen for the
along with beep sound.
(c) Selecting a channel through manual
corresponding category.
search
Turn the TUNE key in clockwise or counter-
Select the desired channel button. The
selected channel will begin playing.
will be restored and the selected channel
Six preset frequencies each for XM1/ XM2/
will begin playing.
XM3 modes can be stored using the above
clockwise direction to display the previous
Voice Command
or next channel information. After a brief
1. Press the
moment, the selected channel will be
displayed.
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
INFORMATION
"Category Search"
If in channel mode, the channel is selected
If in channel mode, the all channels list
from all channels. If in category mode, the first
screen will be displayed.
channel of each category is selected.
(Category search)
Voice Command
previous screen will be restored and the
Input desired channel number, and press
the OK button. The previous screen
INFORMATION
1. Press the
2. After the beep sound, say a command.
"Preset Scan"
instructions.
INFORMATION
To prevent inputting a channel which exceeds
Scanning XM broadcast channel
Press the
the channel range, numbers which cannot be
Press the
continue playing the channel. The scan
inputted are set to disabled state.
Scan
button.
Voice Command
the channel number
Press the Search button. The channel
1. Press the
button on the steering wheel
input screen will be displayed.
2. After the beep sound, say a command.
remote controller.
"Channel<0 to 255>"
Scan
button again to
will be terminated and the current
SCAN (under 0.8 second): Scans all
channels for 5 seconds each if in channel
(e) Selecting channel by directly inputting
key on the steering wheel
remote controller.
AUDIO SYSTEM
"Channel Up"
channel will continue to be played.
mode. If in category mode, scans all
channels within the current category for 5
seconds each.
When scanning has completed an entire
INFORMATION
revolution, the scan function is automatically
Voice Command
1. Press the
terminated and the previous played channel
button on the steering wheel
will be restored.
remote controller.
Channel 0 is the radio ID and contains
information required for XM Activation.
2-8 AUDIO SYSTEM
AUDIO SYSTEM 2-9
PART 2 AUDIO SYSTEM
Operating the CDP
About CDP
Precautions upon handling discs
WARNING !
Never place paper on either side of the
Be cautious not to introduce foreign
disc or write on disc surfaces. Sharp
substances into the disc insert slot.
Always pay full attention to driving. Avoid
writing utensils and inks used in felt-tip
Foreign substances may cause damage
operating your system in such a way that you
pens may cause damage to disc surfaces
to the interior of the device.
are distracted from driving your vehicle.
Clean fingerprints and dust off the signal
The device may fail to operate properly in
extremely hot or cold temperatures.
soft cloth.
Discontinue the use of the device unless
case to prevent it from becoming
Only soft cloths should be used as there
normal temperature is maintained.
scratched, which may cause the CD to
are no grooves for dust to get in as is the
(The operational temperature range is:
The disc types supported by this device are
make popping sounds.
case with LPs.
-10
as shown below.
Do not use heart-shaped discs, octagon-
Copy-protected CDs such as S-type CDs
Steam can be condensed on the fiberoptic
shaped discs, or any other abnormally
may not function in the device.
lens due to rain, wet conditions, or upon
shaped disc. Such discs may be the cause
DATA CDs are not supported by the
operating the heating system.
of malfunctions.
device. (However, such discs may operate
Skipping may occur to the audio when
Do not clean discs with chemical solutions
abnormally.)
driving on bumpy roads for prolonged
periods of time or upon severe shock to
such as record sprays, antistatic sprays,
antistatic liquids, benzene, or thinners.
~ 65 ).
For safe and efficient operation
the vehicle.
Such materials may cause the surface of
Do not disassemble the CDP for repair
DISC to be unrecoverable.
purposes. Contact your place of purchase
Do not expose the disc to direct sunlight
in the case of malfunction. (Complete
to the surfaces of the device.
for prolonged periods of time. Such
service assistance will not be provided if
Always use a clean and dry cloth.
exposure may lead to disc deformation.
the user disassembles the device.)
Dust, scratch, and other substances may
Do not use water to clean the device.
cause popping sound while playing as
Exposure to water may cause damage to
well as sound deterioration.
the device.
2-10 AUDIO SYSTEM
Disc media
Disc format
CD
CD-DA
CD-R
MP3
CD-RW
WMA
Multisession-CD
DTS-CD
CD
Supported disc formats
CD-ROM
CD-G
CD-EXTRA
CD-TEXT
SACD
SACD
SACD(Hybrid)
Disc Size
3-inch (7.6 cm)
5-inch (12.7cm)
Disc format
Audio format
CD-R or CD-RW DISC burned with a bulk
CD
LPCM
CD without quality guarantees may not
MP3
MPEG1, Layer3
Do not use chemical solvent to clean the
MPEG2, Layer3
device. Such solvents may cause damage
MPEG2.5
WMA
be recognized by the device.
Inserting an abnormal disc may result in
faulty operation or recognition.
Ver9
AUDIO SYSTEM 2-11
AUDIO SYSTEM
surface (coated side) of the disc with a
After using a disc, keep it in the original
Disc format
PART 2 AUDIO SYSTEM
Disc/Content format compatibility
However, other contents may cause
Compressed audio compatibility
Although this device supports low bit rate
Inserting/Ejecting Disc
INFORMATION
abnormal disc operation such noise.
This device plays audio files compressed by
MP3 tracks, such tracks may only provide
The writing of CD-R and CD-RW discs with
MPEG-1 audio stream layer 3(MP3) using 32,
low quality sound.
manufactured to be compatible with
this device is not supported.
44.1 and 48kHz fixed bit rates. Incompatible
For stable operation, the use of files in
Insert the disc into the slot.
will be converted back to Audio mode.
software bearing the following logo marks.
Although CD-R/RW discs burned as audio
files are not supported.
95kbps ~ 192kbps bit rate range and
The disc will begin playing automatically
If the operation mode had been in
44.1kHz SAMPLING
recommended.
after it has been inserted.
Navigation mode, then Navigation mode
Ordinary disc compatibility
This
device
has
been
designed/
Variable bit rate files may operate, but the
supported by the device, some information
play time information may not be
such as play time may be displayed.
properly displayed.
frequency
is
mode before ejecting the disc, the device
screen will remain.
INFORMATION
If the disc is straddled on the slot without
PC-created DISC compatibility.
Physical formats of CD : Model 1, Model 2
If the operation mode had been Audio mode
When recording a disc with a personal
XA format 1.
before inserting the disc, the device will
CD-R/RW discs (Audio CD and MP3 CD)
computer, even discs recorded in a
This device only supports tracks with file
convert to the DISC mode screen and begin
the disc player.
created with CD-writing devices or
"format compatible" with the formats
extension of ".MP3" or ".WMA".
playing.
In such a case, the disc will not begin
personal computers may not properly
described above may not operate on the
This device does not support multi-
If the operation mode had been Navigation
playing automatically.
function in the device. This may be
device caused by software settings of the
session discs.
mode, then Navigation mode screen will
caused by damaged recording method,
recording application.
This device supports a maximum of 256
remain and the disc play status will be
contamination by dirt and other foreign
In such cases, contact the software
folders and maximum 512 files.
displayed through the Audio bar.
Audio-CD
CD-R
CD-RW
substance on the disc surfaces or play
developer.
lens, and various other reasons.
Additional
removing for approximately 10 seconds, the
disc will be re-inserted automatically into
AUDIO SYSTEM
CDs which have not been finalized are not
If the operation mode had been in Audio
Inserting a Disc
Folders and files which exceed this limit
information
regarding
Ejecting a Disc
will not be supported.
compatibility can be found on the CD-R/
There are various bit rates which can be
Press the
Special formats or special features
RW software disc box.
encoded onto a MP3 file.
The disc will immediately be stopped and
regarding software
DVD-R/RW are not supported by the
This device has been designed to be
ejected.
CD-R/RW Compatibility.
device.
compatible with various bit rates.
This device operates as a CD-ROM
Audio which has been encoded at
including CD-R and CD-RW DISC written in
128kbps will sound similar to CD audio
CD Audio or MP3 CD Format.
sound quality.
key.
2-12 AUDIO SYSTEM
AUDIO SYSTEM 2-13
PART 2 AUDIO SYSTEM
CD
CD screen and functions
Listening to CD music
Selecting the CD track
Track number: Displays the track
number.
There are 2 ways to select a CD Track - (a)
Play Time : Displays the play time.
selecting through Track Up/Down, (b)
Title name : Display the title name.
selecting through searching Track.
Artist name : Display the artist name.
on the control panel if the CD is already
[Selecting the
CD track], page 2-15.
control panel or steering wheel remote
page 2-15.
Random button : Plays the tracks on the
or previous track will begin playing.
1. Press the
button on the steering wheel
remote controller.
2. After the beep sound, say a command.
"DISC"
Mode display : Displays that the current
mode is CD mode.
controller for less than 0.8 second. The next
INFORMATION
If the TRACK
key on the control panel or
2. After the beep sound, say a command.
remote controller for over 0.8 second.
The track will play 20 times faster while
holding the button and return to normal
play when the button is released.
(b) Selecting track through search
Turn the TUNE knob on the control
Setting Repeat function for CD
music
panel in clockwise or counter-clockwise
direction. Each click on the TUNE knob
Press the Repeat
will display the information of the next or
change the function in the following order:
previous track. The current playing track
REPEAT
will continue to be played.
* REPEAT : repeats the current playing track.
disc for 10 seconds each.
[Scanning CD track], page 2-16.
than 3 seconds, the start of the current track
Press the TUNE knob at the desired
will begin playing. If the track has been
track. The searched track will begin
playing for less than 2 seconds, the start of
playing.
BAS, MID, TRE controls.
[Sound setting], page 1-10.
or TRACK
keys on the control panel or steering wheel
"Previous Track"
steering wheel remote controller is pressed
button : Adjusts the FAD/BAL,
REW/FF CD track
Press and hold the SEEK
"Next Track"
music], page 2-16.
Scan button : Scans all tracks on the
Sound
Voice Command
(a) Selecting through Track Up / Down
Press the SEEK
or TRACK
keys on the
playing track.
[Setting repeat function for CD music],
disc in random order.
[Setting random function for CD
Insert the CD or press the CD/AUX key
inserted.
Select the desired track.
buttons : Repeat the current
button on the steering wheel
remote controller.
button. Each press will
REPEAT OFF
REPEAT
shortly while the track has played for more
the previous track will begin playing.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Repeat Track"
REPEAT/RANDOM/SCAN indicator : If
Say "Repeat File" or "Repeat Folder" again
REPEAT/RANDOM/SCAN is operating,
or say "Normal Play" in order to terminate
the switch is displayed.
the set Repeat
"CD"
"CD Track <1 to 665>"
2-14 AUDIO SYSTEM
AUDIO SYSTEM 2-15
AUDIO SYSTEM
Repeat
Voice Command
1. Press the
PART 2 AUDIO SYSTEM
Setting Random function for CD
music
MP3
Scanning CD track
Press the
Scan
button. Each press will
Press the Random button. Each press will
change the function in the following
change the function in the following order:
order: SCAN
RANDOM
RANDOM OFF
RANDOM
SCAN.
seconds each.
Voice Command
1. Press the
1. Press the
key on the steering wheel
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
remote controller.
function, the full length of folder names
may not be displayed as the scroll function
LEVEL2. Detailed specification is as below.
does not operate when displaying folder
Maximum directory layers: 8 layers
Information
name length: 64 Bytes
The MP3 file standards supported by the
Supported characters for folder name/ file
Please use a MP3 bit rate which is less than
device are as follows.
name: Alphanumeric characters, Korean
128 kbps. The sound quality cannot be
Acceptable standard: MPEG1 AUDIO
standard character set 2350 characters,
guaranteed for MP3s exceeding 128kbps.
LAYER 3
Simplified Chinese 4888 characters
Acceptable sampling frequency: 32, 44.1,
Maximum number of folders which can
"Scan"
48 (KHz)
be stored onto one disc: 256 folders
"Random"
Say "Normal Play" in order to terminate the
Acceptable bit rate: 32, 40, 48, 56, 64, 80,
(including ROOT directory)
Say "Random" or "Random Folder" again or
set Scan function.
96, 112, 128, 160, 192, 224, 256, 320
Maximum number of files which can be
(Kbps)
stored onto one disc: 512 files
Press the Scan button again to continue
Recommended bit rate & reference
Precautions upon burning MP3 files
listening to the track. The scan will be
sampling frequency: 96,128, 192 Kbps
The use of ISO 9660 LEVEL 2 JOLIET
terminated and the current track will
fixed bit rate /44.1KHz
format is recommended when burning
continue to be played.
ID3 tag
MP3 files. Burning in other formats may
2. After the beep sound, say a command.
say "Normal Play" in order to terminate the
set Random function.
names.
Maximum folder length: 64 Bytes, file
* SCAN : Scans all tracks in the disc for 9
random order.
Voice Command
Supported media formats
This device supports ISO9660 LEVEL1 and
INFORMATION
This device supports ID3v1.0, ID3v1.1,
abnormally display the file names.
ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.
It is possible to display up to 32 characters
Supported media
When scanning has completed an entire
Precaution
AUDIO SYSTEM
* RANDOM : plays all tracks in the disc in
SCAN OFF
MP3 disc related information and
precaution
for file and folder names in case of
revolution, the scan function is automatically
The MP3 media supported by the device
UNICODE, and up to 64 characters in case of
terminated and the previous played track will
are CD-ROM and USB.
ASCII. Although the full length of the file
name can be displayed by using the scroll
be restored.
2-16 AUDIO SYSTEM
AUDIO SYSTEM 2-17
PART 2 AUDIO SYSTEM
Listening to MP3 music
MP3 screen and functions
Info ON/OFF
key on the control panel if the MP3 disc is
mode is MP3 disc mode. (MP3 files on
already inserted.
DVD discs are not supported.)
REPEAT/RANDOM/SCAN indicator : If
Select the desired file.
[Selecting the
MP3 file], page 2-19.
REPEAT/RANDOM/SCAN is operating,
the switch is displayed.
Play Time : Displays the play time.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"DISC"
"CD"
"MP3"
Folder name : Displays the folder name.
File name : Displays the file name.
"Next File"
"Previous File"
selecting through file up/down, (b)
"Next Folder"
selecting through searching files, (c)
"Previous Folder"
file], page 2-20.
List
button : Displays the MP3
selecting through MP3 list.
folders and file lists for the disc.
[Selecting the MP3 file], page 2-19.
(a) Selecting through File Up / Down
Press the SEEK
or TRACK
keys on the
(b) Selecting through search
Turn the TUNE knob on the control
(c) Selecting through MP3 List
Press the List button. The file list of
the folder for the current playing file will
be displayed.
INFORMATION
If many songs and folders are recorded onto a
DISC, file loading time may be longer and
button : Repeats the current
control panel or steering wheel remote
panel in clockwise or counter-clockwise
direction. Each click on the TUNE knob
playing folder or file.
[Setting repeat function for MP3 file],
controller for less than 0.8second. The next or
will display the information of the next or
or song search through TUNE operation to
previous file will begin playing.
previous file. The current playing file will
operate improperly. In such cases, wait until file
continue to be played.
loading is complete and try again.
page 2-20.
Random button : Plays all files on the
INFORMATION
INFORMATION
disc or folder in random order.
[Setting random function for MP3
If the TRACK
steering wheel remote controller is pressed
If the operation of the Tune knob is too rapid,
file], page 2-20.
Scan
button : Scans all files on the
shortly while the song has played for more
there may be a delay in displaying the file
than 3 seconds, the start of the current song
information.
disc or folder for 10 seconds each.
[Scanning MP3 file], page 2-21.
will begin playing. If the song has been
Sound
button : Adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Sound setting], page 1-10.
cause the play list to be improperly displayed
key on the control panel or
playing for less than 2 seconds, the start of
Press the TUNE knob at the desired file.
the previous song will begin playing.
The searched file will begin playing.
Press the desired menu to return to the
Voice Command
1. Press the
main screen and play the selected file.
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
2-18 AUDIO SYSTEM
AUDIO SYSTEM 2-19
AUDIO SYSTEM
Mode display : Displays that the current
Selecting the MP3 file
There are 3 ways to select an MP3 file - (a)
current playing file.
[Viewing detail information for MP3
Repeat
Insert the MP3 disc or press the CD/AUX
button : Displays or hides
the detailed file information for the
PART 2 AUDIO SYSTEM
REW/FF MP3 file
Setting random function for MP3
file
change the function in the following order:
Setting repeat function for MP3 file
Press the Random button. Each press
remote controller for over 0.8 second. The
Repeat
changes the setting as follows : Random
file will play 20 times faster while holding
Repeat
Folder Random
the button and return to normal play when
* Repeat : repeats the current playing file.
* Folder Random : plays the files in the
the button is released.
* Folder Repeat : repeats the files in the
or TRACK
Folder Repeat
Repeat Off
current folder.
Viewing detail information for
MP3 file
Press the Info ON button. The detailed
information (Title, Artist, Album, Genre)
for the current playing MP3 will be
displayed.
Random Off
Random
Scanning MP3 file
Press the
INFORMATION
button. Each press will
When scanning has completed an entire
change the function in the following order :
revolution, the scan function is automatically
Scan
terminated and the previously played file will
Scan
Folder Scan
Scan Off
Scan
* Folder Scan : plays all files in the current
be restored.
AUDIO SYSTEM
Press the Repeat button. Each press will
keys on the control panel or steering wheel
Press and hold the SEEK
folder for 10 seconds each.
* Scan: scans all files in the disc for 10
current folder in random order.
* Random : plays all files in the disc in random
seconds each.
order.
Voice Command
1. Press the
Voice Command
Voice Command
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Repeat File"
1. Press the
1. Press the
key on the steering wheel
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
remote controller.
2. After the beep sound, say a command.
"Scan"
"Repeat Folder"
"Random"
Say "Repeat File" or "Repeat Folder" again
"Random Folder"
Say "Normal Play" in order to terminate the
or say "Normal Play" in order to terminate
Say "Random" or "Random Folder" again or
"Folder Scan"
set Scan function.
the set Repeat function.
say "Normal Play" in order to terminate the
Press the
set Random function.
Scan
button again to
continue listening to the file. The scan
will be terminated and the current file
will continue to be played.
Press the Info OFF button. The detailed
information will be turned off.
2-20 AUDIO SYSTEM
AUDIO SYSTEM 2-21
PART 2 AUDIO SYSTEM
Operating external devices
iPod
connector cable, the device will be
Voice Command
INFORMATION
recognized as a USB and may not properly
An iPod cable assembly can be purchased at
operate or display all of the display
your local Hyundai dealer.
2. After the beep sound, say a command.
Supported iPod devices : Classic 4th/5th/6th,
Listening to iPod music
message will be displayed for 5 seconds and
If the message continues even after
reconnecting the iPod, check to see if there
Connect the iPod or press the
are any problems with the iPod device.
CD/AUX
key on the control panel if the iPod is
CAUTION!
already connected.
Mode display : Displays that the current
picture.
If a playing iPod is connected to the audio
The identification of the iPod device, battery
system, a high-pitched tone may occur for
recharge, and other functions provided by
approximately 1-2 seconds.
Even if the iPod is connected, message may
RANDOM is operating, the switch is
the iPod device can be normally supported
Please turn the iPod device to pause/stop
be displayed if an error has occurred. In such a
displayed.
only by using a separately sold iPod
prior to connecting it to the vehicle.
case, reconnect the iPod.
Title name : Displays the title name of
mode is iPod mode.
INFORMATION
connector cable.
2-22 AUDIO SYSTEM
of the playing file.
Up/Down, (b) selecting song through
sequential search, (c) selecting song
button : Converts to the search
menu screen.
[Selecting an iPod song], page 2-23.
REPEAT/RANDOM indicator : If REPEAT/
through menu.
(a) Selecting song through Up / Down
buttons : Repeats the current
Press the Track up/down button on the for
playing song.
[Setting repeat function for iPod
less than 0.8 second. The next or previous
song], page 2-25.
Random button : Plays all songs in the
return automatically to the previous mode.
the iPod for charging is used as the
iPod device - (a) selecting song through
Repeat
protocol version, or other reasons, a pop-up
If the USB cable provided upon purchasing
There are 3 ways to select songs from the
Album name : Displays the album name
song will begin playing.
INFORMATION
current playing list in random order or
If the TRACK
randomly in album unit.
[Setting random function for iPod
steering wheel remote controller is pressed
song], page 2-25.
Sound button : Adjusts the FAD/BAL,
than 3 seconds, the start of the current song
BASS/MID/TREB controls.
[Sound setting], page 1-10.
playing for less than 2 seconds, the start of
key on the control panel or
shortly while the track has played for more
will begin playing. If the track has been
the previous song will begin playing.
the playing file.
Select the desired song.
[Selecting an iPod song], page 2-23.
Play Time : Displays the play time.
AUDIO SYSTEM 2-23
AUDIO SYSTEM
iPod screen and functions
identification error, no track, incompatible
Connect the iPod device as shown in the
the playing file.
Menu
If iPod mode cannot be entered due to
Selecting an iPod song
Artist name : Displays the artist name of
"iPod"
Mini 1st/2nd, NANO 1st/2nd/3rd/4th and Touch
1st/2nd Generations.
Connecting iPod device
key on the steering wheel
remote controller.
information.
iPod is a registered trademark of
Apple Inc.
1. Press the
PART 2 AUDIO SYSTEM
Voice Command
1. Press the
key on the steering wheel
remote controller.
(c) Selecting song through Menu
Press the Menu button. The iPod menu
screen will be displayed.
INFORMATION
1 Step
If the search mode is accessed while playing a
song, the most recent searched step will be
displayed. The search steps upon initial
2. After the beep sound, say a command.
connection are listed below.
"Next Song"
2 Step
3 Step
Playlist
Genre
Genre
Artist
Album
Artist
Artist
Album
Song
Song
Composer
composer
Album
Song
Song
Song
Album
Song
Song
Song
panel in clockwise or counter-clockwise
Songs
Song
Song
direction.
Operate the TUNE key dial to display the
Podcasts
Program
Episode
Random
Album Random
Random Off
Random
current playing list randomly in Album
units.
* Random : plays all files in the current
playing list in random order.
Episode
Voice Command
previous or next channel information. After
a brief moment, the selected channel will
Press the desired song button to return
be displayed.
INFORMATION
Setting repeat function for iPod
song
to the main screen and play the selected
Press the Repeat button. Each press will
song.
change the function in the following order :
If the operation of the TUNE knob is too
Repeat
REW/FF iPod song
rapid, there may be a delay in displaying the
song information.
change the function in the following order :
* Album Random : plays the songs in the
Song
Album
Setting random function for iPod
song
Press the Random button. Each press will
Audiobooks
(b) Selecting song through search
Turn the TUNE knob on the control
4 Step
Song
AUDIO SYSTEM
"Previous Song"
Playlist
Repeat Off
Repeat
* Repeat : repeats the current playing song.
Press the button for the desired search
Press and hold the SEEK
or TRACK
method.
keys on the control panel or steering wheel
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Random"
"Repeat Song"
"Random Album"
Say "Normal Play" in order to terminate the
Say "Random" or "Random Album" again or
set Repeat function.
say "Normal Play" in order to terminate the
set Random
remote controller for over 0.8 second. The
song will be play faster while holding the
button and return to normal play when the
button is released.
2-24 AUDIO SYSTEM
AUDIO SYSTEM 2-25
PART 2 AUDIO SYSTEM
USB
Avoid contact between the USB
The device supports only USB devices
Please use an MP3 bit rate which is less than
between 8Kbps~320Kbps are supported.
connector with bodily parts and foreign
used to play music files.
LEVEL2. Detailed specification is as below.
192Kbps and a fixed bit rate.
Only WMA files with compression rates
substances.
Do not use the USB I/F to charge batteries
Maximum directory layers: 20 layers
The sound quality cannot be guaranteed for
between 8Kbps~320Kbps are supported.
Repeatedly connecting/disconnecting the
or USB accessories which generate heat.
Maximum length of folder name/file
MP3s exceeding 192Kbps and operation of
Be cautious of static electricity when
USB in a short period of time may cause
Such acts may lead to deteriorated
Information
name: 250Bytes
specific functions (limited to FF/REW
connecting/disconnecting the external
damage to the device.
performance or damage to the device.
The MP3 file standards supported by the
Supported characters for folder name/ file
functions) may be abnormal with variable
USB device.
When disconnecting the USB, an
The device may not recognize the USB
device are as follows.
name: Alphanumeric characters, Korean
bit rates.
Encoded MP3 Players will not be
abnormal sound may occur occasionally.
device if separately purchased USB hubs
Acceptable standard: MPEG1 AUDIO
standard character set 2350 characters,
recognized when connected as the
Abruptly disconnecting the external USB
and extension cables are being used.
LAYER 3
Simplified Chinese 4888 characters
external device.
device while the USB is operating may
Connect the USB directly to the
Acceptable sampling frequency: 32, 44.1,
Maximum number of folders which can
When using the external USB device, make
When connecting an external USB device,
cause the device to be damaged or function
multimedia terminal of the vehicle.
48 (kHz)
be stored onto one USB: 2000 folders
sure to keep the device disconnected and
the device may not be properly recognize
abnormally.
In the case of high capacity USB devices,
Acceptable bit rate : 32, 40, 48, 56, 64, 80,
(including ROOT directory)
connect only some time after turning on the
the USB when the USB is in some states.
Make sure to disconnect the USB device
there are instances where the logical
96, 112, 128, 160, 192, 224, 256, 320
Maximum number of files which can be
vehicle ignition. The USB device may be
When formatting the external USB device,
only after the audio power is turned off or
drives
(kbps)
stored onto one USB: 6000 files
damaged if the USB device already
the device may not be properly recognize
when the audio is operating in a different
convenience. In this case, only the USB
Recommended bit rate & reference
Precautions upon formatting USB &
connected when the ignition is turned on.
a Byte/Sector selection other than
mode.
music in the top-level logical drive will be
sampling frequency: 96,128, 192 kbps
downloading MP3 files
(USB device is not an electronic automotive
512Byte or 2048Byte.
The amount of time required to recognize
possible to play.
fixed bit rate /44.1kHz
The device only supports FAT type USB
component)
The device will only recognize USB
the external USB device may differ
When using partitioned drives, save the
ID3 tag
file system. The device will not play USB
The external USB device may not operate
devices formatted in FAT 12/16/32.
depending on the type, size, or file
songs desired to play on the device only
media content if the USB is NTFS type.
if the USB device already connected when
Some USB devices may not operate
formats stored on the USB. Such
in the top-level logical drive.
vehicle ignition is turned on or off.
properly because of compatibility issues.
differences in the required time are not
In addition, certain USB devices are
The device will not operate when playing
Verify that the external device is
indications of malfunction.
configured with a separate drive used to
a format which is not MP3 or WMA file
supported by the device before starting
Please wait the period of time required to
install application programs and songs
formats.
use.
recognize the device.
from such drives may not be possible to
This device supports ID3v1.0, ID3v1.1,
ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.
Supported media
The MP3 media supported by the device
are CD-ROM and USB.
Supported media formats
Precaution
Precautions upon handling USB
are
partitioned
for
user
play for the reasons as described above.
2-26 AUDIO SYSTEM
AUDIO SYSTEM 2-27
AUDIO SYSTEM
Only MP3 files with compression rates
This device supports ISO9660 LEVEL1 and
USB MP3 related information and
precaution
PART 2 AUDIO SYSTEM
The device may not support normal
Please make certain only to use plug type
operation if MP3 Players, cellular phones,
connector products as shown below.
AUX
Listening to USB music
devices (USB devices not recognized as
Playing AUX
AUX screen
Connecting AUX
digital cameras, or other electronic
Plug Type Connector
Connect the external Audio player as
portable disk drives) are connected to the
shown in the picture.
External Device
The device may not support normal
operation when using a USB memory
type besides the Metal Cover Type USB
Memory.
Audio AUX screen
The device may not support normal
operation when using formats such as
Connecting the USB
Connect the USB as shown in the picture.
HDD Type, CF, or SD Memory.
Connect a USB or press the CD/AUX key
Connect an AUX or press the CD/AUX key
on the control panel if the USB is already
on the control panel if the AUX is already
The device will not support files locked by
connected.
Select the desired file.
DRM (Digital Rights Management).
MP3 file], page 2-19.
connected.
[Selecting the
INFORMATION
Connect only by using AUX terminals.
Voice Command
1. Press the
The device many not support normal
Voice Command
operation if the proper connection with
1. Press the
the USB memory fails due to vibrations
caused by the vehicle. (i-stick type, etc.)
AUDIO SYSTEM
device.
key on the steering wheel
remote controller.
key on the steering wheel
2. After the beep sound, say a command.
"Line In"
remote controller.
2. After the beep sound, say a command.
Please avoid using USB memory products
"USB"
which can be used as key chains or cellular
phone accessories as they could cause
damage to the USB jack.
INFORMATION
The USB screen and operation method is the
same with MP3 mode. Please refer to the MP3
mode section for more information.
2-28 AUDIO SYSTEM
AUDIO SYSTEM 2-29
PART 3 NAVIGATION SYSTEM
PART 3
NAVIGATION SYSTEM
PART 3
NAVIGATION SYSTEM
3-2
GPS signal reception state
Vehicle position display
Route guidance
Route Re-calculation
3-2
3-3
3-4
3-4
Starting navigation system
3-5
Setting a Destination
Map Functions
3-5
Current position map screen
(without route)
3-5
Switching map mode
(North up/Heading up)
Viewing GPS signal state
Changing the map scale
3-6
3-7
3-8
Displaying / Hiding POI icons
on the map
Displaying / Hiding Q.POI icons
3-9
3-9
Displaying /Hiding icons other than
Q.POI icons
Making a call to POI
Scrolling map
3-9
3-10
3-11
3-12
Destination menu screen and functions
Searching a destination
Searching an address
Searching a Previous Destination
Searching an Intersection
Searching a POI
Searching from Address book
Searching for emergency facilities
Searching your Home
Searching favorite places
Searching from MAP
Searching POI by local POI list
3-12
3-13
3-13
3-17
3-17
3-20
3-24
3-25
3-25
3-26
3-26
3-26
Operating after searching a
destination
Changing destination position
Setting as Destination/waypoint
Adding to address book
3-27
3-27
3-27
3-27
Operating after setting
a destination
Starting Route Guidance
Route guidance screen
Selecting other route
Route guidance
Setup and Information
3-28
3-28
3-28
3-29
3-30
Route menu screen and functions
3-30
Finishing route guidance
(Delete Destination)
Route overview(View Entire Route)
Changing Route option
Editing waypoints
Adding waypoints
Deleting waypoints
Re-ordering waypoints
Setting detour distance
Setting avoid streets on route
3-30
3-31
3-32
3-32
3-32
3-34
3-34
3-35
3-35
Setup menu screen and functions
Main setting
3-36
3-36
3-36
Setting keyboard for inputting
letter
3-36
Setting voice command feedback
ON/OFF
Seting language
Clock setup
Initializing system
Navigation setting
Setting units (mi/km)
3-37
3-37
3-37
3-38
3-38
3-38
Setting arrival time and distance
display
Registering avoid area
Editing avoid area
Deleting avoid area
Deleting all avoid areas
Setting Q.POI icons
Setting estimate travel time
My places setting
3-38
3-38
3-40
3-41
3-41
3-42
3-42
3-43
Registering new address in
address book
Editing an address of
address book
Deleting an address of address
book
Deleting an address book
Registering home address
Deleting home address
Registering favorite place
Deleting favorite place
System information and update
Voice guidance volume setting
Voice guidance volume control
Adaptive volume control ON/OFF
Traffic Setup
Traffic Information
Help
3-45
3-46
3-47
3-48
3-48
3-49
3-50
3-51
3-51
3-51
3-52
3-52
3-52
3-54
NAVIGATION SYSTEM
Limitations of the navigation
system
3-43
NAVIGATION SYSTEM 3-1
PART 3 NAVIGATION SYSTEM
Limitations of the
navigation system
Vehicle position display
When driving on a spiral-shaped road.
When using a tire with an incorrect size
When driving in mountain regions with
specification.
When the tire pressure for the 4 tires are
current position mark on the navigation
in an underground parking structure,
different.
When the replacement tire is a worn or
may differ from the actual position of the
building parking structure, or turntable
used tire (Especially studless tires having
vehicle.
with many rotations.
When the tires have recently been
passed a 2nd seasons, etc.)
When driving near high-rise buildings
on or near the GPS antenna or when
The position of the vehicle on the
replaced (Especially upon use of spare or
If a roof carrier has been installed
traveling through the following locations.
navigation may be different from the
studless tires)
If the battery terminal is removed.
When driving under high speeds or
actual position if the vehicle is under the
following conditions. If such differences
When driving in city streets, the current
occur, driving for a short period of time
position may be displayed on the
will automatically correct the position of
the vehicle through map matching or GPS
opposite side or on an off-road position.
When changing the zoom level from the
information (several minutes may be
maximum zoom in level to a different
necessary in certain cases).
zoom level, the current position mark
GPS signal reception state
As the GPS satellite frequency is received
Underneath an overpass
Roads within canyons
/transmitted in straight lines, reception
may not work if hiding devices are placed
Roads within forested areas
Tunnels
Areas near high rise buildings
When driving on a Y-shaped road with a
may be displayed on a different road.
When driving in heavy traffic with frequent
narrow angle, the current position may
go
be displayed in the opposite direction.
If the vehicle is loaded onto a ferry or a
When driving under slippery conditions,
car transport vehicle, the current
Basement parking structures
having calculated a long-distance route.
NAVIGATION SYSTEM
from buildings or related causes, the
sharp turns or sudden brakes.
When entering a road after having been
If multipass errors occur due to reflections
stops in traffic or intersections.
such as heavy sand, snow, etc.
When driving with the tire chain in place.
position mark may be stalled on the last
position prior to loading.
3-2 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-3
PART 3 NAVIGATION SYSTEM
Route Guidance
Route Re-calculation
Faulty voice guidance may be given if
The following phenomena may occur
caused by search conditions or the
the vehicle breaks from the designated
driving position.
Guidance to go straight may be given
route (ex: if a turn is made at an
after conducting route recalculation.
Guidance may be given to a position
intersection while the navigation
differing from the current position when
while driving on a straight road.
Guidance may not be given even when
provided guidance to go straight).
Map Data may be missing or incorrect
turning at an intersection.
Route Recalculation may take a longer
having turned at an intersection.
There are certain intersections in which
causing route guidance to not be given.
period of time when driving under high
guidance may not occur.
A route guidance signaling for a U-Turn
in a No U-Turn location may occur.
A route guidance signaling entrance into
a no enter zone may occur (No enter
zone, road under construction, etc.).
Guidance may be given to a position
Map Functions
Current position map screen
(without route)
GPS signal state indicator : Displays the
state of GPS signal reception.
[Viewing GPS signal state], page 3-7.
Map scale level indicator : Displays the
current map scale.
[Changing the map scale], page 3-8.
Landmark icons : Landmark icons are
displayed on the map when the map
scale level is set to under 300 ft (100m
speeds.
A route guidance signaling for a U-Turn
Press the Navigation mode key ( MAP ,
DEST , ROUTE , SETUP ). The Caution screen
depending on map data)
[Appendix : Landmark icons], page 7-7.
in a No U-Turn location may occur.
A route guidance signaling entrance into a
will always be displayed when first entering
POI icons : POI icons are displayed on
no enter zone may occur (No enter zone,
the caution screen carefully and press the
Agree button.
road under construction, etc).
Guidance may be given to a position
removed from the actual destination if
removed from the actual destination if
roads to reach the actual destination do
roads to reach the actual destination do
not exist or are too narrow.
Faulty voice guidance may be given if
not exist or are too narrow.
Starting navigation system
the map when the map scale level is set
into Navigation mode. Read the contents of
Press the MAP key on the control panel to
display the map of current position and the
to under 0.5 mi (800m).
[Appendix : POI icons], page 7-5.
neighboring area.
Current vehicle position icon : Displays
the current position of the vehicle.
the vehicle breaks from the designated
route (ex: if a turn is made at an
intersection while the navigation
provided guidance to go straight)
3-4 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-5
NAVIGATION SYSTEM
Suitable route guidance may not occur
PART 3 NAVIGATION SYSTEM
North Up / Heading Up switch :
Displays the current map mode and the
Switching map mode (North Up /
Heading Up)
The vehicle icon is displayed in the center
position of the map.
map mode can be switched between
Viewing GPS signal state
following conditions.
displayed as shown below.
- When buildings, tunnels, or other
North Up and Heading Up.
[Switching map mode], page 3-6.
Each time the compass button is pressed,
the screen will switch in the order shown
GPS (active) :
POI : Displays or hides the POI icon on
below.
GPS reception is satisfactory.
the map.
[Display/Hiding POI icons on the map],
Heading Up
page 3-9.
North Up
GPS information may not operate under the
The state of GPS signal reception is
obstructions block satellite signals.
Heading Up
- When materials are placed above the GPS
antenna and block satellite signals.
- When the satellite does not transmit
GPS (inactive) :
signals (signal transmission is controlled
GPS reception is unsatisfactory.
[System information and update], page
INFORMATION
by the satellite control center in the
All map screens (map screen after setting
map scale.
[Changing the map scale], page 3-8.
destination & whole route display screen)
Heading Up : displays the map always
except the current position screen will always
facing the direction which the vehicle is
be displayed in North Up mode.
traveling. The vehicle icon is displayed in
GPS (Global Position System) : GPS is a
the lower center position of the map.
system developed and operated by the
This system uses GPS information, various
United States which determines the current
sensors, road map data, and other related
location of the user (longitude, latitude, etc.)
information to display the current position.
by generally using 4 or more satellites. This
Errors may occur if the satellite is
system is used with related GPS information,
transmitting inaccurate signals or if which
various sensors, road map data, and other
can only two or less satellite signals can be
3-51.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
under repair, modification, etc).
INFORMATION
navigation related information.
"North Up"
NAVIGATION SYSTEM
United States and may not transmit when
Map scale : Increases or decreases the
- When a digital cellular phone (1.5GHz) is
placed near the GPS antenna.
received.
Errors which occur in such conditions
"Heading Up"
cannot be corrected.
North Up : displays the map always facing
the North direction regardless of the
direction which the vehicle is traveling.
3-6 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-7
PART 3 NAVIGATION SYSTEM
Changing the map scale
Level
Actual distance
Voice Command
Displaying / Hiding POI icons on
the map
INFORMATION
mi / ft
km / m
150 ft
50 m
300 ft
Displaying/Hiding Q.POI icons
displayed are shown as normal buttons.
700 ft
200 m
"Zoom In"
Press the POI
0.25 mi
400 m
"Zoom Out"
Related menu buttons will be displayed
If there are no POI icons being displayed,
the ALL OFF button will be disabled.
0.5 mi
400 m
"Zoom Maximum"
at the bottom of the screen.
POI icons are displayed when the scale is
the scale bar will be displayed.
1 mi
1.6 km
"Zoom Minimum"
The scale can be changed by directly pressing
2 mi
3.2 km
"Zoom level <1 to 14>"
the scale level on the scale bar.
4 mi
6.4 km
"Zoom "
" (ex. Zoom 700ft)"
Press the
or
button. The map scale
will be increased or decreased by one level.
INFORMATION
Each time the
or
button is pressed,
100 m
8 mi
12 km
current scale level while the orange color
10
16 mi
25 km
indicates the selected scale level.
Press the
or
button for over 0.8
11
32 mi
50 km
12
64 mi
100 km
second. The scale will continuously change.
If the scale range limit is reached, the
13
130 mi
200 km
14
250 mi
400 km
or
key on the steering wheel
The current displayed POI icons are
highlighted while the icons not being
remote controller.
2. After the beep sound, say a command.
button.
under 0.5 mi (0.8km).
INFORMATION
The Q.POI icons are set to
- Parking,
- Bank,
- Hotel,
- Gas Station,
Displaying / Hiding icons other
than Q.POI icons
- Golf Course,
- Fast Food (6 icons) by default.
Press the POI
This setting can be changed in SETUP.
[Setting Q.POI icons], page 3-42.
button.
Related menu buttons will be displayed
at the bottom of the screen.
Press the
button.
Others
button will be disabled.
The map scale range is between 1 and 14:
10,240,000 ~ 1 : 5,000.
INFORMATION
Q.POI stands for Quick POI and refers to the
function which turns POI icon display on or off
on the map.
Press the icon buttons to display or hide.
To turn off all POI icons displayed on the
map, press the ALL OFF button.
3-8 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-9
NAVIGATION SYSTEM
The green color on the scale bar indicates the
1. Press the
PART 3 NAVIGATION SYSTEM
(a) by category list
If the Show Icon(s) button is pressed, the
Making a call to POI
hidden on the map screen.
Voice Command
1. Press the
telephone information for a POI or if there is
Press the map area on the map screen.
number information can be used to make a
no mobile phone connected through
The selected point will be centered on the
call to the POI facility.
Bluetooth.
screen and the scroll mark will be displayed.
For more information of mobile phone
Information about the marked point and
authentication through Bluetooth or
straight line distance from the current
Use the various search methods, such as
2. After the beep sound, say a command.
the map scroll function, Q.POI search
Bluetooth is used to make a call to the
detailed information on conducting search,
position will be displayed at the top of the
"Show " (ex. Show ATM)
function, and destination search function
POI facility.
refer to [Pairing and connecting a Bluetooth
screen.
"Hide " (ex. Hide ATM)
to search for a POI.
phone], page 5-4.
NAVIGATION SYSTEM
Press the desired main category button.
Scrolling map
After searching a POI, the POI phone
key on the steering wheel
remote controller.
INFORMATION
Making a call is not possible if there is no
selected menus will be displayed or
"Hide All"
Once the call is ended, the map is
Select the desired sub category menu to
restored to the current vehicle location.
Press the
display or hide (Multiple selections are
button.
INFORMATION
If a map area on the map screen is pressed,
possible).
the map will continuously scroll in the
Press the selected menu again to cancel
corresponding direction until the pressing is
the selection.
released.
3-10 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-11
PART 3 NAVIGATION SYSTEM
Setting a destination
Destination menu screen and
functions
Emergency : Sets the destination
Searching a destination
through emergency facilities search.
[Searching for Emergency facilities],
Searching an address
There are 2 ways to set the destination
HOME : Sets the stored HOME as the
through address search-(a) by street, (b) by
destination.
[Searching your Home], page 3-25 .
city.
address search.
[Searching an address], page 3-13.
Sets the destination with one of the
stored favorite places.
[Searching favorite places], page 3-26 .
(a) by street
Press the DEST key.
Input the State name and press the
List
button.
Press the Address button.
If the number of matches with the input
is less than 4 results, then the state list
through the previous destination list.
[Searching a previous destination],
screen will be displayed automatically.
If the number of matches is only one
page 3-17 .
result, then the state will automatically be
Press the DEST key on the control panel to
Intersection : Sets the destination
changed without having to manually
display the destination menu screen.
through intersection search.
[Searching an intersection], page 3-
select the state.
Press the Street button.
17.
POI Search : Sets the destination through
Press the
POI Category search.
[Searching a POI], page 3-20 .
state.
State
button to change the
Address Book : Sets the destination
through address book search.
[Searching from Address book], page
3-24 .
3-12 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-13
NAVIGATION SYSTEM
Favorite place 1 ~ 5 :
Previous Dest : Sets the destination
change the state.
page 3-25 .
Address : Sets the destination through
Select the desired state from the list to
PART 3 NAVIGATION SYSTEM
Input the House number and Press the
Done button to complete.
Input the House number and press the
Done button to complete.
Input the city name and press and press
the List button.
If the House number is not recognized,
press the Skip button.
The corresponding position will be
If the number of matches with the input
displayed on the map.
is less than 4 results, then the city list
screen will be displayed automatically.
In this case, the range of house numbers
(b) by city
will be displayed during the last step.
If the desired street from the list is
Input the city name and press the
List
button to complete.
be displayed on the map.
If the number of matches with the input
INFORMATION
This screen will be displayed if the House
number had not been inputted during
step
and more than 2 house numbers
is less than 4 results, then the list screen
ranges exist.
will be displayed automatically.
Select the desired House number range.
If more than 30 cities exist with the selected
Select the desired city from the list.
street, then the city input screen will be
Input the Street name and press the
List
button.
Press the
displayed. If less than 30 cities exist, then the
City
button.
NAVIGATION SYSTEM
selected, the corresponding position will
city selection screen will be displayed.
If the number of matches with the input
is less than 4 results, then the street list
screen will be displayed automatically.
Select the desired city from the list.
This screen will be displayed if the House
number had not been inputted during
step
and only one house numbers
range exists.
3-14 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-15
PART 3 NAVIGATION SYSTEM
Input the house number and press the
Done button to complete.
Searching a Previous Destination
If the House number is not recognized,
press the Skip button.
Press the DEST key.
In this case, the range of house numbers
Press the Previous Dest button.
Searching an Intersection
There are two ways to set the destination
Input the state name and press the
List
button. If the number of matches
through intersection search-(a) by street, (b)
with the input is less than 4 results, then
by city.
the state list screen will be displayed
automatically.
Press the DEST key.
will be displayed during the last step.
If the number of matches is only one
result, then the state will automatically be
Select the desired street from the list and
This screen will be displayed if the House
the corresponding position will be
number had not been inputted during
displayed on the map.
step
Press the Intersection button.
changed without having to manually
select the state.
NAVIGATION SYSTEM
and only one House number
range exists.
Select the house number range and Press
the Done button to complete.
The corresponding position will be
Select the desired previous destination.
Input the Street name and press the
List
button to complete.
displayed on the map.
The corresponding position will be
If the number of matches with the input is
Voice Command
displayed on the map.
1. Press the
less than 4 results, then the street list
screen will be displayed automatically.
This screen will be displayed if the House
number had not been inputted during
step
and more than 2 House number
ranges exist.
Select the desired House number range.
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Find address"
[Find address], page 4-19.
Press the
Voice Command
1. Press the
key on the steering wheel
state.
State
button to change the
Select the desired state from the list to
change the state.
remote controller.
2. After the beep sound, say a command.
"Previous destination"
[Previous destination], page 4-24.
"Previous start point"
[Previous start point], page 4-25.
3-16 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-17
PART 3 NAVIGATION SYSTEM
(a) by street
(b) by city
Select the desired 1st street from the list.
Select the desired 2nd street menu from
Select the desired city name.
the list. The corresponding position will
Select the desired 1st street menu from
the list.
be displayed on the map.
Press the
If the number of matches with the input
Input the name of the 2nd street and
press the List button.
is less than 4 results, then the street list
If the number of matches with the input
screen will be displayed automatically.
is less than 4 results, then the street list
City
button.
Input the name of the 2nd street and
press the List button.
NAVIGATION SYSTEM
Press the Street button.
Input the name of the 1st street and
press the List button.
Input the name of the 1st street and
press the List button.
If the number of matches with the input
If the selected 2nd street is within more
is less than 4 results, then the street list
than 2 cities, then the city list screen will
Input the city name and press the
List
button.
If the number of matches with the input
screen will be displayed automatically.
be displayed.
If the number of matches with the input
is less than 4 results, then the street list
Select the desired city menu from the list.
is less than 4 results, then the city list
screen will be displayed automatically.
The corresponding position will be
screen will be displayed automatically.
screen will be displayed automatically.
displayed on the map.
3-18 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-19
PART 3 NAVIGATION SYSTEM
Searching a POI
There are 3 ways to set the destination
(a) by category
(a-1) Near current position
Searches for facilities nearby the current
Searches for facilities within a 30 mi (45km)
position or from the city center.
radius of the current position.
through POI search - (a) by category, (b) by
name, (c) by phone number.
Press the DEST key.
Select the desired 2nd street menu from
the list.
Press the POI Search
button.
Input the state name and press the
List
button. If the number of matches
with the input is less than 4 results, then
displayed on the map.
the state list screen will be displayed
automatically. If there is only one
Press the desired sub category menu.
Press the Category button.
NAVIGATION SYSTEM
The corresponding position will be
Press the desired main category menu.
matching result, then the state will
Voice Command
automatically be changed without having
to manually select the state.
1. Press the
key on the steering wheel
remote controller.
Press the State button.
2. After the beep sound, say a command.
"Find nearest POI"
[Find nearest POI], page 4-20.
If the selected 2nd street is within more
displayed on the map.
Press the Near current position button to
than 2 cities, then the city list screen will
be displayed.
search for facilities nearby the current
position, or press the Near city center
Select the desired city menu from the list.
The corresponding position will be
Select the desired state from the list to
button to search for facilities in the near
displayed on the map.
change the state.
city center.
3-20 NAVIGATION SYSTEM
Select the desired menu button.
The corresponding position will be
NAVIGATION SYSTEM 3-21
PART 3 NAVIGATION SYSTEM
(a-2) Near city center
(b) by name
Changing City
Press the City
Searches for facilities from the city center.
button.
Input the city name and press the
List
button.
Select the desired city name.
Press the desired main category.
Select the desired menu button.
Select the desired POI menu.
The corresponding position will be
Select the desired main category menu.
The corresponding position will be
Press the Name button.
INFORMATION
INFORMATION
If the number of matches with the input
The distance on each POI item button refers
When necessary, the search conditions for
is less than 4 results, then the city list
to the distance from the city center.
the city and category can be changed by
pressing the Advanced button.
screen will be displayed automatically.
Select the desired sub category menu.
displayed on the map.
(c) by phone number
NAVIGATION SYSTEM
displayed on the map.
Input the city name and press the
List
button.
Changing Category
Press the Category button.
Press the desired sub category.
Input the name of the POI and press the
List
button.
Press the
If the number of matches with the input
Phone #
button.
is less than 4 results, then the facilities list
screen will be displayed automatically.
Press the desired city menu.
3-22 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-23
PART 3 NAVIGATION SYSTEM
Searching from Address book
Searching for Emergency facilities
Press the DEST key.
Press the DEST key.
Press the Address book button.
Press the
Voice Command
1. Press the
Searching your Home
key on the steering wheel
Press the DEST key.
remote controller.
2. After the beep sound, say a command.
Emergency
button.
"Find emergency "
[Find emergency ], page 423.
Select the desired address name from
The corresponding position will be
displayed on the map.
The corresponding position will be
INFORMATION
If the Home address is not registered, then the
HOME button will be displayed.
[Registering home address], page 3-48.
displayed on the map.
[Registering new address in address
Voice Command
1. Press the
the map.
the list.
book], page 3-43.
key on the steering wheel
Select the desired address book (user)
remote controller.
menu.
Select the desired facility category.
Voice Command
1. Press the
2. After the beep sound, say a command.
INFORMATION
"Destination POI by Phone Number"
[Destination POI by phone number],
This system provides 5 address books. Each
page 4-22.
addresses book can hold up to 200 entries.
Voice Command
1. Press the
key on the steering wheel
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
remote controller.
"Go home"
[Go home], page 4-25.
2. After the beep sound, say a command.
"Destination by address book"
[Destination by address book], page 424.
Select the desired facility.
The corresponding position will be
displayed on the map.
3-24 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-25
NAVIGATION SYSTEM
Input the phone number and Press the
Done button to complete.
Press the HOME button.
The Home position will be displayed on
PART 3 NAVIGATION SYSTEM
Searching favorite places
Operating after searching a
destination
Searching from MAP
Position the scroll mark at the destination
Press the DEST key.
by scrolling the map on the map screen.
Voice Command
1. Press the
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
Select the desired button from 1 ~ 5 .
The corresponding position will be
(Sets the position of the scroll mark as the
destination and begins route guidance.)
Press the POI
INFORMATION
button on the map
Select the desired POI menu.
"Store Marked Location to "
displayed on the map.
Changing destination position :
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
key on the steering wheel
"Find nearest "
[Find nearest ], page 4-21.
remote controller.
2. After the beep sound, say a command.
"Destination by memory point <1 to 5>"
[Destination by memory point <1 to 5>],
2. After the beep sound, say a command.
The corresponding position will be
1. Press the
key on the steering wheel
remote controller.
Voice Command
Voice Command
Voice Command
1. Press the
Changes the position of the destination by
scrolling the map.
[Scrolling map], page 3-11.
NAVIGATION SYSTEM
screen.
Press the Others button.
without registered addresses will be disabled.
[Registering favorite place], page 3-49.
1. Press the
book], page 3-43.
"Start guidance"
Searching POI by local POI list
displayed on the map.
If the address of the Favorite place is not
registered, then the 1 ~ 5 buttons
Adding to address book :
Saves the position in the address book.
[Registering new address in address
Setting as Destination / waypoint :
Sets the position as the destination or
Press the Local POI lists button.
waypoint.
page 4-25.
3-26 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-27
PART 3 NAVIGATION SYSTEM
Operating after setting a
destination
Voice Command
1. Press the
Route guidance screen
Selecting other route
key on the steering wheel
Press the
remote controller.
Others
button.
2. After the beep sound, say a command.
"Time to destination"
"Distance to destination"
Highway mode : If the
Starting Route Guidance
button is
Highway junction mode : This route
pressed, then the following route
guidance screen is automatically
guidance screen will be displayed.
displayed during guidance at highway
button is pressed, then the following
junctions.
route guidance screen will be displayed.
Once guidance at a highway junction is
complete, this screen will automatically
Press the
Start Guidance
button. Route
Other routes can be selected by pressing
the
or
buttons.
disappear and the previous guidance
screen will be restored.
Guidance will start.
Route simulation
If the Start Guidance button is pressed
Intersection zoom mode : This route
and held for over 0.8 second, then the
guidance screen is automatically displayed
route simulation will start.
If the MAP key on the control panel is
Turn-List mode : If the
pressed during route simulation, then
pressed, then the following route
Once guidance at the intersection is
route simulation will be terminated.
guidance screen will be displayed.
complete, the screen will automatically
button is
during guidance at an intersection.
disappear and the previous guidance
screen will be restored.
3-28 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-29
NAVIGATION SYSTEM
Symbol guidance mode : If the
PART 3 NAVIGATION SYSTEM
Route guidance
Cancel Route: Deletes destination,
waypoints and terminates route
Route menu screen and functions
guidance.
[Finishing route guidance], page 3-30 .
Finishing route guidance (Delete
Destination)
Route overview (View Entire Route)
key on the steering wheel
Press the ROUTE key.
remote controller.
Press the ROUTE key.
2. After the beep sound, say a command.
Press the Route Overview button.
"Cancel route"
Route Overview: Displays the entire
route and route detailed.
[Route overview], page 3-31 .
Voice Command
1. Press the
Press the Cancel Route button.
(Terminates route guidance and deletes the
set destination and waypoints.)
The detailed route information can be
viewed.
Route Option: The route option can be
NAVIGATION SYSTEM
changed.
[Changing Route option], page 3-32 .
Edit Waypoint: Waypoints can be
added/deleted and the order can be
changed.
[Editing waypoints], page 3-32 .
Press the ROUTE key on the control panel.
The ROUTE menu screen will be displayed.
Press the Turn by turn button.
Press the Yes button.
Detour: Searches detour routes.
[Setting detour distance], page 3-35 .
The destination and waypoints are
Avoid Streets: Searches routes which
deleted and the route guidance is
If the Return to Guidance button is pressed,
avoid the selected streets.
[Setting avoid streets on route], page
terminated.
[Finishing route guidance], page 3-30 .
route guidance screen is displayed.
INFORMATION
3-35.
3-30 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-31
PART 3 NAVIGATION SYSTEM
Changing Route option
Voice Command
1. Press the
Press the ROUTE key.
2. After the beep sound, say a command.
Press the Route Option button.
Editing waypoints
(a) Searching POI lists near route
key on the steering wheel
remote controller.
Adding waypoints
There are 2 ways to add waypoints - (a)
"Replan recommended route"
searching for POI nearest to the route, (b)
"Replan shortest route"
using advanced search.
"Replan minimize freeway route"
"Replan minimize toll road route"
Press the ROUTE key.
Select the desired sub category from list.
Press the Add as Waypoint button.
Press the Near POI lists on Route button.
NAVIGATION SYSTEM
Press the Edit Waypoint button.
Press the button for the desired route
guidance method.
Guidance will be restarted after
recalculating the route with the selected
guidance method.
Press the Press to add new waypoint
Select the desired category.
Select the desired POI from the list.
Press the Done button to complete.
The corresponding position will be
Guidance will restart after recalculating
displayed on the map.
the route.
button.
3-32 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-33
PART 3 NAVIGATION SYSTEM
Setting detour distance
Setting avoid streets on route
(b) Using advanced Search
Re-ordering waypoints
The method for searching waypoints through
the Advanced(more) button is the same
Press the ROUTE key.
Press the ROUTE key.
Press the ROUTE key.
method as searching destination.
[Searching a destination], page 3-13.
Press the Edit waypoint button.
Press the Detour button.
Press the Avoid streets button.
Select the desired waypoint and use the
MOVE
, MOVE
buttons to change
Select the desired detour range.
Select the desired streets to avoid(
the order.
the detour route.
Deleting waypoints
Press the Yes button.
NAVIGATION SYSTEM
Press the ROUTE key.
Press the Edit waypoint button.
Guidance will restart after recalculating
After deleting, press the Done button to
Guidance will be restart after recalculating
Once re-ordering is complete, press the
Done button to complete.
the route.
Guidance will restart after recalculating
complete.
Select the waypoint and press the
Delete button.
avoid,
allow) and press the Done
button to complete.
Guidance will restarted after recalculating
the route.
Voice Command
1. Press the
the route to avoid the selected streets.
key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Detour <1 or 2 or 5 or 10> miles"
"Detour <1 or 2 or 5 or 10> kilometers"
3-34 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-35
PART 3 NAVIGATION SYSTEM
Setup and Information
[Main setting], page 3-36 .
Traffic Setup : Sets whether to display
Setup menu screen and functions
Display button : Adjusts the display
setting. [Display setting], page 1-11 .
traffic information on map, whether to
Setting voice command feedback
ON/OFF
Press the desired setting button.
provide upcoming traffic information voice
guidance, and whether to display the
Main setting
Press the Change button.
Navigation button : Navigation related
Press the
SETUP key on the control panel
to display the setup menu screen.
Pacific Time zone. Set the time according to
12h/24h time formats.
your region.
The time may not be properly displayed if
or off.
Press the Main button.
(c) Time Zone
My Places button : The Address book,
Sets the Time zone according to the user's
Home address, Favorite places, Previous
time zone region.
destination can be edited.
[My places setting], page 3-43 .
(d) Current time setting
System Info button : The system version
Sets the current time manually or
Press the desired language.
information can be viewed and system
upgrades can be conducted.
[System information and update],
page 3-51 .
the GPS time has not been received.
Turns the Daylight Saving Time function on
NAVIGATION SYSTEM
settings can be set.
[Navigation setting], page 3-38 .
INFORMATION
The Time Zone has initially been set to the
(b) Daylight Saving Time
Press the SETUP key.
Time Format can be displayed in either
Setting Language
detour route popup showing upcoming
traffic information.
Clock Setup
(a) Time Format
automatically via the GPS time.
Select the desired changes and press the
Done
button to complete.
Voice Setup button : Adjusts the
Main button : Changes to the input
Navigation guidance volume.
[Voice guidance volume setting],
keyboard type, voice command feedback
page 3-51 .
ON/OFF settings and system initialization
Help button : The help contents can be
viewed.
[Help], page 3-54 .
can be made.
3-36 NAVIGATION SYSTEM
Setting keyboard for inputting
letter
Press the desired keyboard type button.
The selection will be highlighted.
Press the Done button to complete.
NAVIGATION SYSTEM 3-37
PART 3 NAVIGATION SYSTEM
Initializing system
Press the Factory default button.
Navigation setting
Press the SETUP key.
Registering avoid area
Press the Avoid Area button.
Press the Navigation button.
Set the end position of the avoid area
and press the NEXT button.
If the Avoid area needs to be renamed,
press the Rename button.
Each time the Avoid button is pressed, the
function will switch between avoid ( )or
Press the Done button to complete the
setting.
Select the desired changes and press the
Done button to complete.
Press the Done button to complete.
Setting units (mi / km)
Select the desired distance unit.
Press the Yes button.
Setting arrival time and distance
display
NAVIGATION SYSTEM
allow( ).
Press the Add new avoid area button.
Press the menu desired for initialization.
Rename the Avoid area and Press the
Done button to complete.
Set the start position of the avoid area
and press the NEXT button.
Select the desired setting button.
3-38 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-39
PART 3 NAVIGATION SYSTEM
Editing avoid area
Deleting avoid area
Deleting all avoid areas
Press the Avoid Area button.
Press the Avoid area button.
Press the Avoid area button.
If the Avoid area needs to be renamed,
press the Rename button.
Each time the Avoid button is pressed,
Press the Delete button.
the function will switch between avoid(
Press the Edit avoid area button.
Press the Done button once editing is
Press the Edit avoid area button.
Press the Delete all avoid area button.
complete.
Press the Yes button.
Rename the Avoid area and press the
Done button to complete.
Select the Avoid area button to edit.
3-40 NAVIGATION SYSTEM
Select the Avoid area button to delete.
Press the Yes button.
NAVIGATION SYSTEM 3-41
NAVIGATION SYSTEM
)or allow( ).
PART 3 NAVIGATION SYSTEM
Setting Q.POI icons
Setting estimate travel time
Press the Edit Q.POI button.
Press the Travel Speed button.
My places setting
Press the Add to Address Book button.
(b) by registering in the address book
Press the SETUP key.
Registering new address in
address book
Press the My Places button.
There are 3 ways to register a new address
in the address book - (a) by DEST menu, (b)
by registering address in address book, (c)
Select the desired sub category.
from map scroll.
Press the desired address book (user)
button.
or
button on the
Press the DEST key.
Residential, Main street, and Freeway
controls to adjust the speed.
Default button to set the
Press the
speeds to the default settings.
Press the Done button to complete.
Press the Address book button.
Search through the desired method.
The search process is the same as the
NAVIGATION SYSTEM
(a) by DEST menu
Press the
Select the desired menu.
method for destination search.
[Searching a destination], page 3-13.
Press the Done button to complete the
Select the desired category.
INFORMATION
setting.
Q.POI stands for Quick POI and refers to the
Input the name and telephone information
function which turns POI icon display on or off
and press the Done button to complete.
[Editing an address of address book],
on the map.
Press the desired address book (user)
page 3-45.
button.
3-42 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-43
PART 3 NAVIGATION SYSTEM
Input the name and telephone information
Editing an address of address
book
and press the Done button to complete.
[Editing an address of address book],
Press the SETUP key.
page 3-45.
Press the My places button.
(c) from map scroll
Press the New Address button.
In the map screen, scroll the map to the
Press the desired address book (user)
desired position.
button.
Select the desired address to edit.
Input the address name and press the
Done button to complete.
NAVIGATION SYSTEM
Input the name and telephone information
and press the Done button to complete.
[Editing an address of address book],
page 3-45.
Press the Address book button.
Press the Address button to search the
address.
[Searching an address], page 3-13.
Press the
Press the Add to Address Book button.
Name
button to input the
Press the Address button to search the
address name.
address. The process is the same as the
method for searching an address.
[Searching an address] , page 3-13.
INFORMATION
Press the Store current position button to input
the address of the current position.
3-44 NAVIGATION SYSTEM
INFORMATION
Select the desired address book (user)
Press the Store current position button to input
button .
the address of the current position.
NAVIGATION SYSTEM 3-45
PART 3 NAVIGATION SYSTEM
Press the Phone button to input the
Deleting an address of address
book
phone number.
Deleting an address book
Press the SETUP key.
Press the SETUP key.
Press the My places button.
Press the My places button.
Select the desired address button to
Press the Yes button.
Press the Delete all button.
delete.
NAVIGATION SYSTEM
Input the phone number and press the
Done button to complete.
Press the Address book button.
Press the Address book button.
Press the Yes button.
Press the Delete button.
Press the Done button to complete.
Press the desired address book (user)
Select the desired address book (user)
button.
button.
3-46 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-47
PART 3 NAVIGATION SYSTEM
Registering home address
INFORMATION
Deleting home address
Registering favorite place
Press the SETUP key.
Press the SETUP key.
Press the My places button.
Press the My places button.
Press the Store current position button to
Press the SETUP key.
Press the My places button.
register the current position as Home.
Search the address.
The process is the same method as
searching an address.
[Searching an address], page 3-13.
Press the Yes button.
Press the Search address button.
INFORMATION
Press the Store current position button to
register the current position as a Favorite place.
Press the Home Address button.
Press the Home Address button.
Press the Favorite Places button.
Search the address.
The process is the same as the method
for searching an address.
[Searching an address], page 3-13.
Press the Done button to complete.
Press the Search Address button.
Press the Delete button.
Press the number of the Favorite Place to
register.
3-48 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-49
NAVIGATION SYSTEM
PART 3 NAVIGATION SYSTEM
Deleting favorite place
Press the SETUP button.
Press the My places button.
Press the Done button to complete.
Press the Delete button.
NAVIGATION SYSTEM
Press the Favorite Places button.
Press the Yes button.
Select the desired favorite place button
to delete.
3-50 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-51
PART 3 NAVIGATION SYSTEM
INFORMATION
Traffic information will be shown on the map
up until the scale is ~4mile.
Displays the traffic information around
vehicle for up to a radius of 50 miles.
(Information exceeding 50 miles will not be
displayed)
The above list can be sorted by either
The user can check points of accidents
Distance (Default) or Category.
and traffic details.
After selecting the desired menu among
the six menus, press the Done button
List screen, the corresponding Category
list will be shown and maintained until
Category information is changed.
Select the desired
List
button.
Press the Category Select button at No. 2.
3-52 NAVIGATION SYSTEM
NAVIGATION SYSTEM 3-53
NAVIGATION SYSTEM
to save. Once returning to the previous
(b) Changing Traffic Category
PART 3 NAVIGATION SYSTEM
PART 4
VOICE COMMAND SYSTEM
Help
Press the SETUP key.
Operating voice command
4-2
Condition for voice command system
4-2
Basic operation for voice
command control
Voice command Help
4-2
4-3
Press the desired Help menu button.
Setting up the voice command
system
4-4
Setting voice Prompt ON/OFF
Speaker adaptation
Press the Help button.
be viewed by using the top-down scroll
buttons.
Press the
Navigation
Voice command list
4-6
Command list of Audio system
Command list of Navigation system
Command list of Phone
Command list of Help
4-6
4-12
4-18
4-18
Searching destination by
voice command
4-19
button.
3-54 NAVIGATION SYSTEM
VOICE COMMAND SYSTEM
The full content of the help section can
4-4
4-4
VOICE COMMAND SYSTEM 4-1
PART 4 VOICE COMMAND SYSTEM
Operating voice command
Basic operation for voice
command control
INFORMATION
The "help" command can be used even while
Press the
key on the steering wheel
voice recognition dialogue is operating. At
remote controller. A voice command
such time, help instructions appropriate to
window will be displayed on the lower
the state of the dialogue will be provided.
side of the screen followed by a
Most of the functions within the AV and
"Command please" system voice
Navigation system can be operated by
voice. Please follow the following
Once the
instructions for optimal voice recognition
icon on the pop-up screen with a beep
screen and voice system. If the command
performance.
sound, say the desired voice command
was not recognized properly, say "Back".
Press the
key on the steering wheel
remote controller. A voice command
performance of the voice recognition can
window will be displayed on the lower
be improved if the environment of the car
side of the screen followed by a
interior is quiet.
"Command please"
Press the voice recognition button and
comment.
INFORMATION
The microphone is positioned above the
The System voice comment "Command
driver so that voice commands can be
Please" will not be provided when the Voice
spoken while maintaining a proper
prompt is turned OFF.
The inputted command is fed back to the
(ex : previous destination)
[Voice command list], page 4-6.
[Searching destination by voice command],
The commands which can currently be
page 4-19.
comment.
INFORMATION
The System voice comment "Command
INFORMATION
Please" will not be provided when the Voice
prompt is turned OFF.
Say the name of the desired menu.
inputted are displayed on the screen in
yellow.
Once the
icon on the pop-up screen with a beep
"Help" command to view the commands list
To terminate the voice recognition system,
either say "cancel" or press the
for over
in detail.
0.8 second.
menu
Be aware that during the operation of the
commands, such as "destination help"
voice recognition system, pressing the hard
can be inputted directly.
system voice
say the desired voice command after the
icon changes into the
If the exact command is not known, use the
INFORMATION
Press the
shortly to input a voice
posture.
command from among the system voice
Pronounce the voice commands naturally
comments. The system voice instruction
and clearly as if in a normal conversation.
comment will immediately terminate. When
the
icon changes into the
icon with a
icon changes into the
(ex : "Destination help")
sound, say "Help". If the proper Help
is
already
known,
voice
keys or the screen will terminate the voice
recognition system.
Say the desired voice command.
beep sound, input the desired voice command.
4-2 VOICE COMMAND SYSTEM
VOICE COMMAND SYSTEM 4-3
VOICE COMMAND SYSTEM
Close all windows and the sunroof. The
sound of the beep.
Voice command Help
Condition for voice command
system
PART 4 VOICE COMMAND SYSTEM
Setting up the voice
command system
Speaker adaptation
Reset Speaker adaptation: Returns to
previous state prior to applying Speaker
Press the
key on the steering wheel
Setting voice Prompt ON/OFF
remote controller.
Voice prompt ON : All system prompts are
Once the
provided.
icon on the pop-up screen with a beep
adaptation.
Press the
icon changes into the
key on the steering wheel
remote controller.
Voice prompt OFF : Most of the system
Once the icon changes into the icon on
sound, say "Voice setup." Or the "Speaker
Once the
prompts are not provided.
the pop-up screen with a beep sound,
adaptation" command can be directly
icon on the pop-up screen with a beep
icon on the pop-up screen with a beep
say "Voice Prompt on".
inputted.
sound, say "Yes".
sound, say "Reset Speaker adaptation".
Press the
icon changes into the
Once the
icon changes into the
key on the steering wheel
remote controller.
INFORMATION
In the Voice Setup Help screen, the commands
icon changes into the
possible for input within the current mode are
icon on the pop-up screen with a beep
displayed. For example, if the Voice prompt is
sound, say "Voice setup." The "voice
currently in Off state, then the command Voice
prompt on" or "voice prompt off" can be
prompt ON will be displayed on the screen.
VOICE COMMAND SYSTEM
Once the
directly inputted if the current state is
Once the
already known.
icon changes into the
Listen and repeat the 20 commands
icon on the pop-up screen with a beep
(approximate) as instructed by the
sound, say "Speaker adaptation".
device.
4-4 VOICE COMMAND SYSTEM
VOICE COMMAND SYSTEM 4-5
PART 4 VOICE COMMAND SYSTEM
Voice command list
Command list of Audio system
Command
Seek Down
The voice commands for this system are
FM/AM Radio
divided into Global commands and Local
Command
commands.
Operation
Operation
Searches and plays the previous frequency of the current band.
Preset Up
Plays the next preset frequency of the current band.
Preset Down
Plays the previous preset frequency of the current.
Scan
Scans all frequencies within the current band.
Radio
Plays the most recent frequency for the most recently
operated Band.
operate in all operating modes.
Local command ( ) : Commands which
(Radio) AM
Plays the most recent frequency for the corresponding
Band.
operate only when the corresponding
(Radio) FM
Plays the most recent frequency for the corresponding
Band. In the case of FM, the most recent frequency
within the most recently played FM1 or FM2 band is
played.
FM <1 or 2>
Plays the most recent frequency for the corresponding
Band.
AM frequency <530 to 1710>
(ex. AM frequency 1310)
Plays the desired AM band frequency.
FM frequency <87.5 to 107.9>
(ex. FM frequency 99.1)
Plays the desired FM band frequency.
XM Channel <0 to 255>
Plays the desired XM band channel.
AM Preset <1 to 6>
Plays the desired AM band preset frequency.
XM <1 or 2 or 3> Preset <1 to 6>
Plays the desired preset channel for XM1 or XM2 or XM3 band.
FM <1 or 2> Preset <1 to 6>
Plays the desired preset frequency of FM1 or FM2 band.
Channel < 0 to 255 >
Plays the desired channel of the current band.
Preset <1 to 6>
Plays the desired preset frequency for the current Band.
Preset <1 to 6>
Plays the desired preset channel of the current band.
Seek Up
Searches and plays the next frequency of the current
band.
Channel Up
Plays the next channel of the current band.
Channel Down
Plays the previous channel of the current band.
Global command (
) : Commands which
mode is operating or when the mode
screen to the corresponding mode is
displayed.
Scans the 6 preset frequencies of the current band.
Auto Preset / Auto Store
Searches all frequencies within the current band and stores the 6 frequencies with the most superior
reception as preset buttons.
XM Radio
Command
VOICE COMMAND SYSTEM
4-6 VOICE COMMAND SYSTEM
Preset Scan
Operation
Plays the last channel within the last band from XM1, XM2, and XM3.
XM <1 or 2 or 3>
Plays the most recent channel for the corresponding Band.
VOICE COMMAND SYSTEM 4-7
PART 4 VOICE COMMAND SYSTEM
Command
Preset Up
Operation
MP3
Plays the next preset channel of the current band.
Preset Down
Plays the previous preset channel of the current band.
Scan
Scans all channels within the current band.
Preset Scan
Scans all preset channels within the current band.
Command
DISC
CD
Command
DISC
Operation
Plays the DISC already inserted in the DVDP.
If the DISC inserted in the DVDP is either a CD or MP3 DISC, then the CD or MP3 will be played.
CD track <1 to 665>
If the DISC inserted in the DVDP is a CD, then CD Mode will start and plays the desired track.
Track <1 to 665>
Plays the desired track.
Next track
Plays the next track.
Previous track
Plays the previous track.
Scan
Scans all tracks on the CD DISC.
Repeat track *
Repeats the current playing track.
Random *
Plays the tracks of the CD DISC in random order.
Normal play
Turns off the Scan, Repeat, and Random functions.
CD
If the DISC inserted in the DVDP is either a CD or MP3 DISC, then the CD or MP3 will be played.
MP3
If the DISC inserted in the DVDP is an MP3 DISC, then the MP3 will be played.
Next file
Plays the next file.
Previous file
Plays the previous file.
Next folder
Plays the first file in the next folder.
Previous folder
Plays the first file in the previous folder.
Scan
Scans all files within the MP3 DISC.
Folder Scan
Plays all songs in the folder in which the current playing file is located for 10 seconds each.
Repeat File *
Repeats the current playing file.
Repeat Folder *
Repeats all tracks within the current playing folder.
Random *
Plays all files within the MP3 DISC MP3 DISC in random order.
Random Folder *
Plays all files within the current playing folder in random order.
Normal play
Turns off the Scan, Repeat, and Random functions.
Commands with * mark are commands which are toggled between ON and OFF.
VOICE COMMAND SYSTEM
CD
Operation
Plays the DISC already inserted into the DVDP.
Commands with * mark are commands which are toggled between ON and OFF.
4-8 VOICE COMMAND SYSTEM
VOICE COMMAND SYSTEM 4-9
PART 4 VOICE COMMAND SYSTEM
USB
iPod
Command
USB
Operation
Command
Operation
If the USB has been connected to the device, plays the MP3 files within the USB.
iPod
Next file
Plays the next file.
Next song
Plays the next song.
Previous file
Plays the previous file.
Previous song
Plays the previous song.
Next folder
Plays the first chapter of the next folder.
Repeat song
Repeats the current playing song.
Previous folder
Plays the first chapter of the previous folder.
Random *
Plays all songs within the iPod in random order.
Scan
Scans all files within the USB.
Random Album *
Plays all songs within the current playing album in random order.
Folder Scan
Plays all songs in the folder in which the current playing file is located for 10 seconds each.
Normal play
Turns off the Repeat and Random functions.
Repeat File *
Repeats the current playing file.
Repeats all songs within the current playing folder.
Random *
Plays all files within the MP3 DISC in random order.
Random Folder *
Plays all files within the current playing folder in random order.
Normal play
Turns off the Scan, Repeat, and Random functions.
Commands with * mark are commands which are toggled between ON and OFF.
Others
Command
Line in
Commands with * mark are commands which are toggled between ON and OFF. ***
4-10 VOICE COMMAND SYSTEM
VOICE COMMAND SYSTEM
Repeat Folder *
Plays the songs within the iPod if the iPod has been connected to the device.
Operation
Plays the unit connected with the AUX terminal.
Audio on
Turns on the Audio/Video.
Audio off
Turns off the Audio/Video.
VOICE COMMAND SYSTEM 4-11
PART 4 VOICE COMMAND SYSTEM
Command list of Navigation system
Command
Navigation commands will operate only agreeing to the terms and conditions for the Navigation system.
Operation
16 miles / 25 kilometers
32 miles / 50 kilometers
Map
64 miles / 100 kilometers
Command
Operation
130 miles / 200 kilometers
Map Current location
Displays the current position of the vehicle.
250 miles / 400 kilometers
Zoom In
Decreases the map zoom by one level.
(ex.Zoom 0.25 miles, zoom 400 meters)
North up
Displays the map in North Up mode.
Heading up
Displays the map in Heading Up mode.
Zoom Out
Increases the map zoom by one level.
Zoom minimum
Displays the map screen in the minimum zoom level.
Zoom maximum
Displays the map screen in the maximum zoom level.
Show  (ex. Show ATM)
Displays the selected POI categories.
Zoom level <1 to 14>
Displays the map in the zoom level selected from the 14 levels.
Hide  (ex. Hide ATM)
Hides the selected POI categories.
Hide all
Hides all POI categories.
Daylight mode
Converts the map display into daylight mode.
Night mode
Converts the map display into night mode.
Auto mode
Converts the map display is between daylight/night modes automatically.
Displays the map in the corresponding zoom.
150 feet / 50 meters
300 feet /100 meters
700 feet / 200 meters
0.25 miles / 400 meters
0.5 miles / 800 meters
1 mile / 1.6 kilometers
VOICE COMMAND SYSTEM
Zoom 
[POI Category list], page 4-17.
[POI Category list], page 4-17.
2 miles / 3.2 kilometers
4 miles / 6.4 kilometers
8 miles / 12 kilometers
4-12 VOICE COMMAND SYSTEM
VOICE COMMAND SYSTEM 4-13
PART 4 VOICE COMMAND SYSTEM
Destination
Command
Find address
Route
Operation
Command
Operation
Sets the destination through address search for route guidance.
Cancel route
Find nearest POI
Sets a POI near the current position as the destination for route guidance through POI category search.
Repeat voice guidance
Repeats the route guidance.
Find nearest 
Sets a POI near the current position as the destination by directly inputting the POI name for
route guidance. [POI Category list], page 4-17.
Detour <1 or 2 or 5 or 10> miles
Searches detour routes within a <1|2|5|10> mile radius.
Destination POI by phone number
Sets the destination by searching the phone number of the facility.
Find Emergency 
Searches for an emergency facility which is nearby the current position and sets it as the
destination for route guidance. Emergency facilities are police stations, hospitals, and
dealerships.
(ex. Find Emergency Hospital)
Sets one of the list of previously registered addresses in the address book for the user as the
destination.
Previous destination
Sets one of the previous destination as the current destination.
Previous start point
Sets the previous start point as the current destination.
Go home
Sets the previously registered home address as the destination for route guidance.
Destination by memory point <1 to 5>
Sets a previously registered memory point as the destination for route guidance.
4-14 VOICE COMMAND SYSTEM
Detour <1 or 2 or 5 or 10> kilometers
Searches detour routes within a <1|2|5|10> kilometer radius.
Replan recommended route
Recalculates the route with the recommended route.
Replan shortest route
Recalculates the route with the shortest route.
Replan minimize freeway route
Recalculates the route with the minimize freeway route.
Replan minimize toll road route
Recalculates the route with the minimize toll route.
Distance to destination
Reports the remaining distance until destination by voice.
Time to destination
Reports the remaining time until destination by voice.
View route
If the destination has been set, displays the whole route screen until the destination.
Start guidance
Sets the scroll mark displayed on the map as the destination and starts route guidance.
VOICE COMMAND SYSTEM 4-15
VOICE COMMAND SYSTEM
Destination by address book
Deletes the designated destination and terminates the route guidance.
PART 4 VOICE COMMAND SYSTEM
Others
POI Category list
Command
Operation
Voice guidance on
Turns the Voice Guidance On.
Voice guidance off
Turns the Voice Guidance Off.
Voice guidance louder
Increases the Voice Guidance volume by 1 level.
Voice guidance softer
Increase the Voice Guidance volume by 1 level.
Store marked location to 
(ex. Store marked location to user 1)
Registers the selected location into the selected Address book.
Rest Area
Car Wash
Motorcycle Dealership
All of Travel
Airport
Hotel
Tourist Information
Travel Agent
Tourist Attraction
Popular Spot
Rental Car Agency
Campground
Ferry Terminal
Bus Station
Local Transit
Train Station
All of Shopping
Department Store
Convenience Store
Shopping Center
Music Store
Grocery Store
Bookstore
Hardware Store
Gifts shop
4-16 VOICE COMMAND SYSTEM
Sporting Goods store
Home Specialty Store
Clothing shop
Shoe Store
Pharmacy
All of Recreation
Amusement Park
Museum
Cinema
Sports Activities
Sports Complex
Golf Course
Winery
Video & Game Rental
Ski Resort
Recreation Area
Other Recreation
All of Financial Service
Bank
ATM
Check Cashing Service
Money Transfer
Business Facility
Police Station
Post Office
Library
Court House
Fire Department
Convention Center
City Hall
Civic Center
School
Government Offices
Waste & Sanitary
Utilities
All of Services
Hospital
Dentist
Photography
Tax Service
Medical Service
Attorney
Funeral Director
Hair & Beauty
Cleaning & Laundry
Social Service
Physician
Communication services
Mover services
VOICE COMMAND SYSTEM
All of restaurants
Fast Food restaurant
American restaurant
French restaurant
Italian restaurant
Continental restaurant
Mexican restaurant
Japanese restaurant
Chinese restaurant
Korean restaurant
Vegetarian Food restaurant
Seafood restaurant
Latin American restaurant
Asian restaurant
African restaurant
Coffee Shop
Other restaurants
All of automotive
Gas Station
Parking
Auto service
Road Assistance
Hyundai Dealership
Automobile Dealership
Auto Parts
VOICE COMMAND SYSTEM 4-17
PART 4 VOICE COMMAND SYSTEM
Command list of Phone
Searching destination by voice
command
Command
Operation
Call Name
Makes the call to the name.
Dial Number
makes the callto the number.
Find address
Sets the destination through address search
for route guidance.
Redial
The recently called number is redialed.
Recent Calls
The user can select a number from the outgoing, incoming, and missed calls.
Press the
key on the steering wheel
Say the state name.
Say the street name.
Say the city name.
Say the House number. Here, the range
remote controller.
Command list of Help
Once the
icon changes into the
icon on the pop-up screen with a beep
Command
Displays the main Help screen.
Destination Help
Displays the Destination related command list.
Map Help
Displays the Map related command list.
Radio Help
Displays the FM/AM radio related command list.
XM Help
Displays the XM radio related command list.
Disc Help
Displays the DISC mode related command list for the disc inserted in the CDP.
iPod Help
Displays the iPod related Command list.
USB Help
Displays the USB related command list.
Phone Help
Displays the Phone help screen.
Voice setup Help
Displays the Voice prompt settings and speaker-adaptive commands on the screen.
4-18 VOICE COMMAND SYSTEM
sound, say "Find address".
which can be inputted will be displayed.
Say "Start guidance" if guidance to the
selected position is desired, or say "Show
Say "Change state" to change the state.
map" to verify the location of the
selected position on the map.
VOICE COMMAND SYSTEM 4-19
VOICE COMMAND SYSTEM
Help
Operation
PART 4 VOICE COMMAND SYSTEM
INFORMATION
Find nearest POI
Pick-List(n-best list)
Spell recognition
Find nearest 
Sets a POI near the current position as the
Sets a POI near the current position as the
destination for route guidance through POI
destination by directly inputting the POI
category search.
name for route guidance.
Press the
key on the steering wheel
remote controller.
Press the
Select the desired sub category.
Say "Start guidance" if guidance to the
key on the steering wheel
remote controller.
selected position is desired, or say "Show
If there are more than one voice result, then
Once the
a pick-list which can be selected by the user
icon on the pop-up screen with a beep
icon changes into the
It is possible to search the state, city, street
will be displayed.
sound, say "find nearest POI".
names through the text line inputted by the
There may be more than one list page. The
user.
desired page can be viewed by using
To enter spell search mode, say the "Spell
commands such as "next page" or "previous
000" command as displayed on the screen.
page".
Text lines can be inputted continuously.
Here, the "Line + number" voice command
Select the desired POI from the list and
can be used to select the desired result,
say
such as "Line one". Pressing the desired
corresponding menu. Ex) "Line 1".
map" to verify the location of the
Once the
selected position on the map.
icon on the pop-up screen with a beep
icon changes into the
sound, say "Find nearest Parking".
line
number
for
the
Select the desired main category.
Also, selectable areas will be highlighted in
Select the desired POI from the list and
yellow, allowing the user to easily see which
say
results can be selected.
corresponding menu. Ex) "Line 1".
4-20 VOICE COMMAND SYSTEM
the
line
number
for
VOICE COMMAND SYSTEM
the
result is not supported.
the
VOICE COMMAND SYSTEM 4-21
PART 4 VOICE COMMAND SYSTEM
Destination POI by phone number
INFORMATION
Continuous recognition of phone numbers is
Select the desired location from the list
and say the line command.
Find emergency  :
Searches for an emergency facility which is
Sets the destination by searching the
possible, and the recognized result will be
nearby the current position and sets it as
phone number of the facility.
displayed in block units. To correct a block
the destination for route guidance.
unit, say "correct". To delete the entire result,
Emergency facilities are police stations,
say "delete". To have the input read back, say
hospitals, and dealerships.
Press the
key on the steering wheel
remote controller.
"repeat".
Press the
Say "Start guidance" if guidance to the
icon changes into the
key on the steering wheel
selected position is desired, or say "Show
Once the
map" to verify the location of the
icon on the pop-up screen with a beep
selected position on the map.
sound, say "Destination POI by Phone
Say "Start guidance" if guidance to the
Once the
number".
selected position is desired, or say "Show
icon on the pop-up screen with a beep
map" to verify the location of the
sound, say the voice command.
Ex) Find emergency hospital
remote controller.
Say "Start guidance" if guidance to the
selected position is desired, or say "Show
map" to verify the location of the
selected position on the map.
VOICE COMMAND SYSTEM
selected position on the map.
icon changes into the
Say "Show list" to view the resulting search
list.
Input the 10 numbers for the phone
number.
Select the desired location from the list
and say the line command.
4-22 VOICE COMMAND SYSTEM
VOICE COMMAND SYSTEM 4-23
PART 4 VOICE COMMAND SYSTEM
Destination by address book
Previous destination
Previous start point
Go home
Sets one of the list of previously registered
Sets one of the previous destination as the
Sets the previous start point as the current
Sets the previously registered home
addresses in the address book for the user
current destination.
destination.
address as the destination for route
as the destination.
guidance.
Press the
Press the
key on the steering wheel
key on the steering wheel
Press the
remote controller.
key on the steering wheel
remote controller.
remote controller.
Once the
Press the
key on the steering wheel
remote controller.
icon changes into the
Select the desired location from the list
Once the
and say the line command.
icon on the pop-up screen with a beep
sound, say "Previous destination".
icon on the pop-up screen with a beep
icon changes into the
Say "Start guidance" if guidance to the
Once the
icon changes into the
selected position is desired, or say "Show
icon on the pop-up screen with a beep
Once the
map" to verify the location of the
sound, say "Previous start point".
icon on the pop-up screen with a beep
selected position on the map.
sound, say "Destination by address
book".
icon changes into the
sound, say "Go home".
as the destination for route guidance.
Press the
Say "Start guidance" if guidance to the
Select the desired user name(Address
selected position is desired, or say "Show
Select the desired location from the list
Say "Start guidance" if guidance to the
map" to verify the location of the
and say the line command.
selected position is desired, or say "Show
selected position on the map.
book name).
key on the steering wheel
remote controller.
map" to verify the location of the
Once the
selected position on the map.
icon on the pop-up screen with a beep
icon changes into the
VOICE COMMAND SYSTEM
Destination by memory point
<1 to 5>
Sets a previously registered memory point
sound, say "Destination by memory
point 1".
4-24 VOICE COMMAND SYSTEM
VOICE COMMAND SYSTEM 4-25
PART 5 BLUETOOTH HANDSFREE
PART 5
BLUETOOTH HANDSFREE
Before using the Bluetooth
Handsfree
PART 5
BLUETOOTH HANDSFREE
5-2
Bluetooth Handsfree screen
layout
What is Bluetooth?
5-2
Functions supported by Bluetooth
Handsfree
Bluetooth Handsfree screen and
functions
5-2
- When there is no mobile phone
connected
- When a mobile phone is connected
Converting Bluetooth Handsfree
mode
5-2
Converting from AV/Navigation mode to
Bluetooth Handsfree mode
5-2
Converting from Bluetooth Handsfree mode
to AV/Navigation mode
5-3
Pairing a mobile phone
5-4
5-14
Switching call to the mobile phone
5-14
Activating Call waiting
5-14
5-9
Ending a call
5-15
5-9
Phone Book
5-16
5-9
Making a call from the Phone book
5-16
Bluetooth settings
5-24
Pairing and connecting a mobile
phone
5-24
Setting mobile phone auto connect
priority
5-24
Setting Handsfree volume
5-25
Setting Audio streaming
5-26
- When receiving an incoming call
5-10
Searching the Phone Book
5-17
Advanced settings
5-26
- When already on a call
5-10
- Searching by name
5-17
- When there is a call waiting
5-10
- Searching by number
5-18
- Searching and modifying
my device properties
5-27
- Changing passkey
5-28
- Deleting all paired phones
5-28
Making a call
5-11
Making a call by dialing a phone
number
5-11
Making a call from Speed Dial
5-11
Making a call by redialing
Deleting a paired phone
5-6
Connecting a mobile phone
5-7
Answering a call
Disconnecting a mobile phone
5-8
Answering an incoming call
Rejecting an incoming call
5-12
Call History List
5-19
Making a call from Call history
5-19
Sorting call history
5-19
- Initializing Bluetooth handsfree
Important information
PHONE MUSIC
5-21
About pairing mobile phones
5-29
5-30
5-30
Before playing PHONE MUSIC
5-21
About making/answering phone calls 5-31
Starting PHONE MUSIC
5-21
About Bluetooth device environment 5-31
5-13
PHONE MUSIC screen layout
5-22
5-13
Selecting PHONE MUSIC files
5-23
5-13
BLUETOOTH HANDSFREE
Pairing and connecting a Bluetooth
phone
5-4
Operating menus during a call
5-9
BLUETOOTH HANDSFREE 5-1
PART 5 BLUETOOTH HANDSFREE
Before using the Bluetooth
Handsfree
What is Bluetooth?
Functions supported by
Bluetooth Handsfree
Pairing mobile phones (Up to 5 phones)
Connecting/disconnecting mobile phones
Converting Bluetooth
Handsfree mode
Converting from Bluetooth
Handsfree mode to
AV/Navigation mode
Converting from AV/Navigation
mode to Bluetooth Handsfree
mode
Navigation (MAP, DEST, ROUTE) screens can
be operated.
Making/Answering phone calls
information between PC, mobile phones,
Downloading a Phone Book
headsets, PDAs, printers and other devices
Downloading a Call history list
The system will change to Bluetooth
within close ranges by using 2.45Ghz
Playing music saved in a Bluetooth phone
Handsfree mode and display the PHONE
frequency
in the vehicle
screen.
wireless
INFORMATION
modes are not supported while on a
Bluetooth Handsfree call. The call volume and
Bluetooth allows wireless transmission of
short-distance
Most of the functions of the AV or SETUP
telecommunication technologies.
Within this vehicle, users can make
Some functions may not be supported in
While in Bluetooth Handsfree mode, press
handsfree calls, transmit mobile phone
some mobile phone.
an AV/Navigation mode key, such as
AM/FM or MAP .
data, and play audio streaming files by
connecting a mobile phone with the
system.
BLUETOOTH HANDSFREE
The following screen will become
displayed if no mobile phone has been
connected.
Bluetooth is a trademark owned by
Bluetooth SIG, Inc.
While in AV mode or Navigation mode,
press the PHONE key or the
key on
The corresponding mode will be displayed.
the steering wheel.
5-2 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-3
PART 5 BLUETOOTH HANDSFREE
Pairing and connecting a
Bluetooth phone
Pairing a mobile phone
The list of currently paired phones will be
displayed. Press the Add to button to
From the Bluetooth device list within the
When pairing the car handsfree from the
Once Bluetooth connection is successful,
mobile phone, add the car handsfree.
mobile phone, a passkey input window
the name of the connected mobile phone
pair a new mobile phone.
The default name of the car system is
will become displayed on the mobile
will become displayed on the PHONE
GENESIS COUPE.
phone screen. Input the passkey set within
screen and Bluetooth handsfree functions
the car system into the mobile phone
will operate.
INFORMATION
Press the Settings button on the PHONE
For safety reasons, pairing a Bluetooth
For more information on registering
input window. (The factory state passkey is
screen.
phone is not possible when the vehicle is in
Bluetooth devices from the mobile phone,
0000.) As shown in the figure, once the
motion.
please refer to the mobile phone user's
passkey becomes successfully inputted,
Some functions may not be supported due
Park the vehicle in a safe location to pair a
manual.
the Bluetooth connection between the car
to limited Bluetooth compatibility between
system and mobile phone will start.
the car system and mobile phone.
new phone. It is possible to pair up to five
INFORMATION
INFORMATION
phone when there are already five mobile
While conducting a Bluetooth device search
phones paired, you must first delete one of
from the mobile phone, operating to
the previously paired phones.
another screen will prevent the car
BLUETOOTH HANDSFREE
mobile phones. In order to pair a new
handsfree from being found in the mobile
Press the Pairings button on the Settings
phone. Always conduct searches for
screen.
Bluetooth devices with the Search
Bluetooth device screen displayed.
5-4 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-5
PART 5 BLUETOOTH HANDSFREE
CAUTION!
Deleting a paired phone
Connecting a mobile phone
A mobile phone cannot be deleted if it is
currently connected to the car system.
To delete the phone, first disconnect the
mobile phone and try again.
The list of currently paired phones will be
Press the Settings button on the PHONE
displayed. Select the phone you wish to
delete from the list and press the Delete
Press the Settings button on the PHONE
screen.
button.
screen.
The list of currently paired phones will be
The Bluetooth connection between the car
displayed. Select the phone you wish to
system and mobile phone will start.
connect from the list and press the
Connect button.
INFORMATION
When there are no paired phones, pair the
mobile phone through [Settings>Pairings>
Add to]. For more information on pairing
mobile phones, refer to the user's manual
A pop-up asking whether you wish to
Press the Connections
screen.
delete the paired phone will be displayed.
Press the Yes button to delete the
Settings screen.
paired phone and the
No
[Pairing and Connecting a Bluetooth phone >
Once Bluetooth connection is successful,
Pairing a mobile phone].
the name of the connected mobile phone
button on the
will become displayed on the PHONE
screen and Bluetooth handsfree functions
will operate.
button to
cancel.
5-6 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE
Press the Pairings button on the Settings
BLUETOOTH HANDSFREE 5-7
PART 5 BLUETOOTH HANDSFREE
Bluetooth Handsfree screen
layout
Disconnecting a mobile phone
When a mobile phone is connected
Phone number input window : Displays
the inputted phone number.
Dial : Input the phone number through
Bluetooth Handsfree screen and
functions
the dial pad.
SEND : If a number has not been inputted
into the phone number input window,
If the connection between the mobile
The list of currently paired phones will be
phone and Bluetooth fails, the following
displayed. Select the phone you wish to
pop-up will be displayed. If problems occur
Press the Settings button on the PHONE
while connecting Bluetooth, check for the
screen.
When there is no mobile phone
connected
then displays the call history list screen.
Del : Deletes the inputted number one
digit at a time.
END : If a number has been inputted, then
disconnect from the list and press the
Disconnect button.
Phone battery charge status : Displays
erases the entire number.
the battery charge status of the
Contacts : Displays the phone book
connected mobile phone. The battery
screen. The user can search previously
Whether the mobile phone you wish to
charge status may not be displayed in
saved phone numbers.
connect is in the vicinity of the car system
some mobile phones.
Whether the power of the mobile phone
Signal strength : Displays the mobile
following conditions.
phone signal strength. The signal
Bluetooth has been turned off
Settings : The user can set environment
strength may not be displayed in some
settings for the Bluetooth handsfree, such
mobile phones.
Whether there are Bluetooth compatibility
Press the Connections button on the
A pop-up asking whether you wish to
as pair/delete mobile phone, connect/
Bluetooth connection state : Becomes
issues between the car system and another
Settings screen.
disconnect the mobile phone will be
disconnect mobile phone, set call volume,
displayed when a Bluetooth phone has
displayed.
Press the Yes button to disconnect the
change device name and change passkey.
been connected with the car system.
been set to hidden state
mobile phone
mobile phone and the
cancel.
5-8 BLUETOOTH HANDSFREE
No
button to
BLUETOOTH HANDSFREE
Whether the mobile phone Bluetooth has
Name of connected mobile phone :
Displays the name of the connected
mobile phone.
BLUETOOTH HANDSFREE 5-9
PART 5 BLUETOOTH HANDSFREE
When receiving an incoming call
Name of incoming caller : Displays the
Mute : Use this function to mute the
outgoing volume. Pressing the Mute
button will display the
at the top right
name of incoming caller. The name of the
side of the screen and the caller will not be
incoming caller will not be displayed if the
caller's phone number has not been
able to hear the conversation taking place
in the car. Press the Mute button again to
previously registered in the phone book.
release the Mute function.
Busy icon : When already on a call, displays
an icon shaped like a receiver.
Making a call
Making a call from Speed Dial
NFORMATION
To modify, press the
Making a call by dialing a phone
number
Del
button to delete
the inputted number one digit at a time.
Press the END button or the
key on the
steering wheel to cancel the call.
Number of incoming caller : Displays the
number of the incoming caller.
When there is a call waiting
Call state : Displays the call state, such as
Accept : Accepts the incoming call.
talk time, phone connection, and end time.
Reject : Rejects the incoming call.
END : Ends the call.
When already on a call
Use the number pad on the right side of
the PHONE screen to input a speed dial
number.
Private : When talking on the car
Use the number pad on the right side of
handsfree, use this function to switch the
the PHONE screen to input the number
call to the mobile phone. Press this button
you wish to call.
INFORMATION
Only speed dial numbers already stored on
and the following screen will be displayed.
the mobile phone can be used for speed dial
The speaker and microphone will be
calls.
Up to 2-digit speed dial numbers are
supported.
Switch : Use this button to switch
between callers when there are calls on
call waiting.
END : Use this button to end the calls with
all callers.
Press the SEND button or the
key on
the steering wheel to make the call.
5-10 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE
switched to the mobile phone.
BLUETOOTH HANDSFREE 5-11
PART 5 BLUETOOTH HANDSFREE
Answering a call
Making a call by redialing
Rejecting an incoming
INFORMATION
Upon receiving a call, the [Reject] function
Answering an incoming call
may not be supported in some mobile
phones.
Press the SEND button or the
key on
The recently called number is redialed.
the steering wheel to make the call.
INFORMATION
Press and hold (over 0.8 seconds) the
SEND button on the PHONE screen or the
key on the steering wheel.
For 2-digit speed dial numbers, press and
hold the 2nd digit to make a call to the speed
dial number.
INFORMATION
INFORMATION
The following screen will be displayed
when you receive an incoming call.
It is not possible to display the AV mode and
Settings screen when on a phone call. Only
The following screen will be displayed
the call volume and Navigation (MAP, DEST,
when you receive an incoming call.
ROUTE) screens can be operated.
Redialing is not possible when there is no call
history or the call history list is being
BLUETOOTH HANDSFREE
downloaded from the mobile phone. When
there is no call history list, the SEND button
will be inactive.
To reject the incoming call, press the
Reject button or the
key on the
To answer the incoming call, press the
Accept button or the
key on the
steering wheel. The incoming call will be
rejected.
steering wheel.
5-12 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-13
PART 5 BLUETOOTH HANDSFREE
Operating menus during a
call
Activating Call waiting
Ending a call
Switching call to the mobile
phone
As shown, the call will be switched to the
To switch again to the other caller, press
the Switch button or the
key on the
mobile phone.
INFORMATION
If another person calls while already on a
steering wheel. The other call will be
To end a call, press the
call, the following screen will be displayed.
received and the previous call will switch
the
If you wish to switch the call to the mobile
handsfree while talking on the mobile phone,
press the Use handsfree button or press and
button or
INFORMATION
Press the
key on the
button or the
key on
phone while talking on the car handsfree,
press the Private button or press and
hold (over 0.8 seconds) the
steering wheel. The call will be switched to
the steering wheel to end the current call and
hold (over 0.8 seconds) the
the car handsfree.
call waiting.
key on
End
key on the steering wheel.
back to call waiting.
If you wish to switch the call to the car
End
Press the Accept button or the
BLUETOOTH HANDSFREE
the steering wheel.
The call will be ended.
key
on the steering wheel to receive the
incoming call by switching to the new
caller.
5-14 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-15
PART 5 BLUETOOTH HANDSFREE
Phone Book
Searching the Phone Book
INFORMATION
The system may begin to slow down when
Making a call from the Phone
book
downloading the phone book in some
mobile phones.
Upon connecting a mobile phone, the
phone book lists saved in the mobile phone
will automatically be downloaded. The
phone book download function may not be
The call will be made to the selected
supported in some mobile phones.
number.
INFORMATION
Phone numbers can be searched by either
Search by name or Search by number .
Press the Contacts button on the PHONE
From the two methods, select the search
screen.
method you wish to use.
Input the name you wish to search and
press the Done button.
When there are more than 2 numbers saved
Press the Contacts button on the PHONE
in one phone number list, if the list is
screen.
repeatedly selected, the registered phone
Searching by name
numbers will be displayed sequentially on
the list.
The Mobile Phone/Office/Home categories
received via the mobile phone may differ
button.
mobile phone.
Press the Search button on the Contacts
Select the phone number you wish to
screen.
The search results will be displayed on the
from the information actually stored in the
connect by repeatedly selecting the phone
number list and press the SEND button to
screen.
Press the Search by name button on the
Phonebook search screen.
make the call to the selected number.
5-16 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-17
BLUETOOTH HANDSFREE
The phone book list will be displayed.
Select the number you wish to call from
the phone book list and press the SEND
PART 5 BLUETOOTH HANDSFREE
Call History List
Searching by number
Sorting call history
Making a call from Call history
The search results will be displayed on the
The call will be made to the selected
screen.
number.
Press the Search by number button on the
The call history can be displayed by sorting
the incoming calls, outgoing calls and
Phonebook search screen.
Press the SEND button on the PHONE
screen or press the
missed calls.
key on the
When pressing the Dialed , Received , or
steering wheel.
Missed
button, the corresponding call
history list will be displayed.
BLUETOOTH HANDSFREE
Input the phone number you wish to
search and press the Done button.
The call history list will be displayed. Select
the number you wish to call from the call
history list and press the SEND button.
5-18 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-19
PART 5 BLUETOOTH HANDSFREE
Dialed number
Missed number
PHONE MUSIC
For example, if you convert to the Bluetooth
Starting PHONE MUSIC
handsfree while playing Phone music, the
Before playing Phone music
music will be discontinued.
Playing music from the car is not possible
Music saved in the mobile phone can be
when there are no music files stored in the
played in the car through Bluetooth audio
mobile phone.
streaming.
Phone music can be played only when a
Bluetooth phone has been connected. To
play phone music, connect the Bluetooth
Received number
INFORMATION
phone to the car system. For more
If there are no entries saved in the Dialed ,
information on connecting Bluetooth, please
, or Missed lists, the corresponding
refer to the user's manual [Pairing and
Received
button will be inactive. Up to 20 entries can
Connecting a Bluetooth phone].
be saved in each list.
If the Bluetooth is disconnected while playing
phone music, the music will be discontinued.
The audio streaming function may not be
between the Bluetooth handsfree or Phone
Repeatedly press the CD/AUX key on the
front panel or the MDOE key on the
music function.
steering wheel to enter Phone music
Only one function can be used at a time
mode.
5-20 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-21
BLUETOOTH HANDSFREE
supported in some mobile phones.
PART 5 BLUETOOTH HANDSFREE
Phone music screen layout
INFORMATION
Selecting Phone music files
Each press of the CD/AUX key on the front
panel will change the function in the order of
DISC
USB or iPod
AUX
Phone Music
DISC .
Each press of the MODE key on the steering
wheel will change the audio mode in the
order of FM1
FM2
XM3
USB or iPod
DISC
Music
AM
XM1
AUX
XM2
The Phone music screen is displayed.
Phone
FM1.
Press the
INFORMATION
buttons on the
Phone music screen or the SEEK
It is not possible to enter Phone music mode if
While music saved in the mobile phone will
Information Bar : displays information for
the mobile phone is not connected or if the
automatically begin playing after converting
the currently playing song.
audio streaming setting within Bluetooth
to the Phone music screen, this music player
File Down button : plays the previous
handsfree settings has been set to [Disable
function may not be supported in some
song.
streaming audio].
mobile phones.
Play/Pause button : Plays/pauses the
For more information on audio streaming
setting, please refer to the user s manual
If music does not begin playing even after
song.
converting to the Phone music screen, try
File Up button : plays the next song.
The file selection function may not be
[Bluetooth settings > Setting Audio streaming].
starting the music directly from the mobile
Sound button : sets the FAD/BAL and
supported in some mobile phones.
phone.
BAS/MID/TRE.
TRACK
keys on the system.
The previous or next song will be played
each time the button or key is pressed.
INFORMATION
BLUETOOTH HANDSFREE
5-22 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-23
PART 5 BLUETOOTH HANDSFREE
Bluetooth settings
Setting Handsfree volume
INFORMATION
The Bluetooth handsfree volume can be
Pairing and connecting a mobile
phone
adjusted only when a mobile phone has been
connected.
The Volume cannot be set if no mobile
phone has been connected.
For more information on pairing and
connecting a mobile phone, please refer to
[Pairing and Connecting a Bluetooth phone].
Press the Settings button on the PHONE
screen.
The paired mobile phone list and the
mobile phone connection priority will be
displayed.
Press the Settings button on the PHONE
Setting mobile phone auto
connect priority
When wishing to change the priority order,
screen.
After turning on the car ignition and the
priority.
Press the
system is booted up, the Bluetooth connection
changed mobile phone priority.
select the mobile phone from the list and
use the
buttons to change its
INFORMATION
Done
Use the
button to save the
Press the Priority button on the Settings
The Bluetooth connection will be conducted
screen.
buttons to set the
INFORMATION
in the order of mobile phone priority.
Press the Volume button on the Settings
While on a call, turning the POWER knob to
The auto connect priority will be supported
screen.
the left/right or pressing the
only for previously paired mobile phones.
BLUETOOTH HANDSFREE
automatically made.
desired volume on the Phone volume
screen. Press the Done button to save.
between the car system and mobile phone is
VOL
key on
the steering wheel will also adjust the call
volume.
If the call volume is set too high, the loud
incoming call bell may cause a traffic accident.
5-24 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-25
PART 5 BLUETOOTH HANDSFREE
Setting Audio streaming
Advanced settings
INFORMATION
Bluetooth advanced settings can be
For safety reasons, operation of Advance
changed. Enter advanced settings through
setup is not possible when the vehicle is in
the following way.
motion. Please park in a safe place to make
Searching and modifying my
device properties
changes to Advanced setup.
Streaming audio setting is selected.
Use the key pad to input the Device name
you wish to modify.
Press the Settings button on the PHONE
screen.
INFORMATION
Press the Device information button on the
Enable streaming audio: Repeatedly press the
CD/AUX key or the MODE key to enter
Advance setup screen.
Phone music mode. Phone music can be
Press the Settings button on the PHONE
played through Bluetooth audio streaming.
Disable streaming audio: Even if the CD/AUX
key or the MODE key is repeatedly pressed,
screen.
The Advance setup screen will be
displayed. In Advance setup, the following
four settings can be made.
will not enter Phone music mode. Phone
After inputting is complete, press the
Done button to save.
not supported.
Press the Streaming audio button on the
Displays the Device information such as
Settings screen.
the name and address of the car system.
Press the Advanced setup button on the
To modify the device name, press the
Change name button.
Settings screen.
5-26 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE
music through Bluetooth audio streaming is
BLUETOOTH HANDSFREE 5-27
PART 5 BLUETOOTH HANDSFREE
Changing passkey
INFORMATION
A pop-up asking whether you wish to
Initializing Bluetooth handsfree
INFORMATION
delete all paired phone will be displayed.
Press the Yes button to delete all paired
Upon initializing the Bluetooth handsfree, the
used for a Bluetooth connection between the
mobile phone and car system. The default
phones and the No
Bluetooth related settings will be restored to
The passkey is a 4-digit authentication code
entire paired phone list will be deleted and all
button to cancel.
passkey is set to 0000.
factory state.
Deleting all paired phones
Press the Change passkey button on the
Press the Restore factory settings button on
Advance setup screen.
the Advance setup screen.
If
Yes
button is pressed, all currently
If Yes is pressed, the Bluetooth handsfree
paired phones will be deleted.
settings will be initialized.
Press the Delete all paired phones button
on the Advance setup screen.
A pop-up asking whether you wish to
displayed, input the desired passkey and
press the Done button.
initialize the Bluetooth handsfree will be
BLUETOOTH HANDSFREE
Once the Change passkey screen is
displayed.
Press the Yes
button to initialize the
Bluetooth handsfree system and the No
button to cancel.
5-28 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE 5-29
PART 5 BLUETOOTH HANDSFREE
Important information
Q. What is the difference between pairing a
mobile phone and connecting a mobile
About pairing mobile phones
phone?
A. Through a two-way passkey between
Q. What is a Passkey?
A. A passkey is an authentication code used
About making/answering phone
calls
system and the mobile phone.
Q. How can I answer a call?
A. When you receive an incoming call,
Q. I cannot search for mobile phones
the car system and mobile phones, up to
Only 4-digit numbers can be used as
through the car system. What is the
5 mobile phones can be paired with the
passkeys. Passkeys are registered only
press the
cause?
car system. The paired mobile phone will
once when pairing the phone number
or the Accept button on the PHONE
screen to answer. To reject the incoming
call, press the
key on the steering
A. Check to see whether the mobile phone
About Bluetooth device
environment
for two-way authentication of the car
key on the steering wheel
for the first time. The factory-set passkey
the user deletes it manually.
is 0000.
function. If your mobile phone supports
In addition, the call history lists and
wheel or the Reject button on the
Bluetooth, check to see that whether the
phone number books saved in each
PHONE screen.
Bluetooth settings in the mobile phone
mobile phone will also be maintained
have been set to hidden state or if the
until the paired phone is deleted. For
Bluetooth power has been turned off. If
more information on pairing mobile
the device has been set to hidden,
phones, please refer to the manual
release the hidden state and if the
[Pairing and Connecting a Bluetooth
Bluetooth power has been turned off,
turn the power ON and try searching
again.
Q. What should I do if I am talking on the
Handsfree but wish to switch the call to
the mobile phone?
connection?
A. The wireless connection range is within
10 meters.
Q. How many mobile phones can be paired?
A. It is possible to pair up to five phones
with the car system.
Q. What is the reason why the call quality
deteriorates?
A. First, check to see the signal strength of
A. To switch the call to the mobile phone,
the mobile phone. The call quality may
phone > Pairing a mobile phone].
press the Private button on the PHONE
deteriorate when the signal strength is
Connect a mobile phone to Bluetooth
screen or press and hold (over 0.8
seconds) the
key on the steering
low. Call quality may also deteriorate if
by selecting the desired mobile phone
from the paired phones. Within the car
wheel. If you wish to switch the call back
placed near the mobile phone.
system, only one Bluetooth phone can
to the car handsfree, press the
Use handsfree button on the PHONE
be connected at one time. For more
information, please refer to the manual
[Pairing and Connecting a Bluetooth
screen or press and hold (over 0.8
seconds) the
key on the steering
phone > Pairing a mobile phone].
wheel.
5-30 BLUETOOTH HANDSFREE
BLUETOOTH HANDSFREE
remain paired with the car system until
you wish to connect supports Bluetooth
Q. What is the range for Bluetooth wireless
metal objects, such as drink cans, are
BLUETOOTH HANDSFREE 5-31
MEMO
PART 6
HVAC MODE
Cautions upon operating HVAC
mode
6-2
HVAC mode screen layout
6-2
HVAC System operations
6-3
Adjusting cabin temperature
Operating the air conditioning system
Setting fan direction
Setting fan level
6-3
6-3
6-4
6-5
HVAC MODE
5-32 BLUETOOTH HANDSFREE
HVAC MODE 6-1
PART 6 HVAC MODE
Cautions upon operating HVAC
mode
When in the AV, Navigation, or Bluetooth
HVAC mode screen layout
Recirculation display : Displays the air
handsfree mode screen, press a HVAC key,
such as TEMP , AUTO , or A/C , to
intake mode.
Upon operating the HVAC system, the display
display the HVAC system status bar at the
heating/cooling auto function is ON/OFF.
is as shown below.
top of screen.
A/C display : Displays whether the air
HVAC System operations
Operating the air conditioning
system
Adjusting cabin temperature
AUTO display : Displays whether the
conditioner is ON/OFF.
Use the temperature adjustment keys to
Press the
A/C
key.
adjust the cabin temperature.
HVAC system status on the entire screen.
HVAC MODE
Press the CLIMATE key to display the
INFORMATION
Cabin temperature can be adjusted within a
range of 17.5
~ 31.5
in units of 0.5 .
Outside temperature display : Displays the
Setting the temperature below 17.5
outside temperature.
display the message "LOW" on the
Driver-side temperature display : Displays
will
temperature display while setting the
the driver-side temperature.
temperature above 31.5
Fan direction display : Displays the set fan
message "HIGH" on the temperature display.
direction.
will display the
As shown in the image on the right, the
A/C display will be activated and the air
conditioner will begin to operate.
Fan level display :Displays the set fan level.
6-2 HVAC MODE
HVAC MODE 6-3
PART 6 HVAC MODE
Setting fan direction
INFORMATION
Pressing the
A/C
Setting fan level
key again will discontinue
INFORMATION
Changing the fan direction will operate in the
following order.
the air conditioner from operating.
Press the
key. The fan direction
will be changed.
Press the
key. The fan level will
be changed.
HVAC MODE
The changed fan direction will be
displayed on the screen.
6-4 HVAC MODE
HVAC MODE 6-5
MEMO
PART 7
APPENDIX
Troubleshooting guide
7-2
Before thinking the product has
malfunctioned
Troubleshooting
7-2
7-3
Map legend
7-5
Road color
POI icons
Landmark icons
7-5
7-5
7-7
INDEX
7-8
APPENDIX
6-6 HVAC MODE
APPENDIX 7-1
PART 7 APPENDIX
Troubleshooting guide
Troubleshooting
Before thinking the product has malfunctioned
Problem
Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.
If you are having problems with the device, try the suggestions listed below.
The power does not
turn on.
If the problems persist, contact your point of purchase or the nearest service center.
Problem
There are small red, blue, or green dots
on the screen
Function
Because the LCD is manufactured with technology requiring high point density, a pixel deficiency or
lighting may occur within 0.01% of total pixels.
Possible Cause
The fuse is disconnected.
Solution
Replace with a suitable fuse. If the fuse is disconnected again, please
contact your point of purchase or service center.
Device is not properly connected.
Check to see that the device has been properly connected.
XM only goes through
one category
The XM mode is in category.
Press the mode button to change to channel mode.
The CD does not play.
The sound or image is not
working
Has the Switch for the vehicle been turned to [ACC] or [ON]?
The DISC has not been inserted or has been
inserted upside down.
Insert the disc properly so that the sides are facing the correct
direction.
Has the SYSTEM been turned OFF?
The DISC has been contaminated.
Wipe dirt and other foreign substances from the DISC.
The video is being displayed but
sound is not working
Has the volume been set to a low level?
The vehicle battery is low.
Charge the battery. If the problem persists, please contact your point of
purchase or service center.
When the power is turned on, the
corners of the screen are dark
The display looking somewhat darker after prolonged periods of use is a normal phenomenon with
LCD panels. It is not a malfunction.
Has the volume been set on mute?
If the screen is very dark, contact your point of purchase or the nearest service center.
Sound is working from only one
speaker
Is the position of FAL/BAL sound controls or volume adjusted to only one side?
Is the audio and video connector jacks fully inserted into the AUX terminal?
The external device is not working
Is the external device connected with a standard connector cable?
The road is missing
Some map data may be missing or incorrect.
The road name is spoken incorrectly
The TTS(Text To Speech) engine speaks the street name based off of the phonetic spelling.
This will continuously be update with the map database.
7-2 APPENDIX
The sound does not
work.
A disc which is not supported by the device
has been inserted.
Insert a disc which is supported for play by the device.
The brightness level has been set to the
lowest level.
Adjust the brightness to a higher level.
The volume level is set the lowest level.
Adjust the volume level.
The connector is not properly connected.
Check the connection state.
The device is currently fast-forwarding,
rewinding, scanning, or playing in slow
mode.
The sound will not work when the device is fast-forwarding,
rewinding, scanning, or playing in slow mode.
APPENDIX 7-3
APPENDIX
Sound and video does not work in AUX
mode
The video does not
work.
PART 7 APPENDIX
Problem
Possible Cause
The USB does not work.
Wipe off water or dirt from the DISC. Do not use a disc which has
been scratched.
POI icons
Road color
No
Category
Sub Category
Icon
No
Category
Sub Category
Vibration is occurring from the position in
which the conversion switch has been installed.
The sound may be short-circuited and the image distorted if the
device begins to vibrate. The device will return to normal
operation once the vibration has stopped.
Freeway
Fast Food
17
Others
The color and tone quality of the image is low.
Aging of the video display and deterioration in performance
may cause certain quality degradations.
Arterial
American
18
Representation
USB memory is damaged.
Please use after formatting the USB into FAT 12/16/32 format.
County
French
19
Gas Station
USB memory has been contaminated.
Remove any foreign substances on the contact surface of the
USB memory and multimedia terminal.
Collector
Italian
20
Parking
A separately purchased USB HUB is being used.
Directly connect the USB memory with the multimedia terminal on
the vehicle.
Continental
21
Auto service
Mexican
22
A USB extension cable is being used.
Directly connect the USB memory with the multimedia terminal on
the vehicle.
Japanese
23
Chinese
24
Kia Dealership
10
Korean
25
Automobile Dealership
11
Vegetarian Food
26
Auto Parts
12
Seafood
27
Rest Area
13
Latin American
28
Car Wash
Unpaved local
14
Asian
29
Ferry
15
African
30
A USB which is not a Metal Cover Type USB
Memory is being used.
Use a standard USB Memory.
A HDD type, CF, SD Memory is being used.
Use a standard USB Memory.
Day Road Type
Color
Local
Only MP3,WMA file formats are supported. Please use only the
supported music file formats.
Use iTunes to download and save MP3 files into the iPod.
The iPod firmware version has not been
properly updated.
Use iTunes to update the firmware version and reconnect the
iPod with the device.
The iPod device does not recognize downloads.
Reset the iPod and reconnect with the device.
Restaurants
Road Assistance
Ferry
Color
Freeway
There are no titles which can be played.
Icon
Coffee Shop
16
Representation
Unpaved local
Night Road Type
There are no music files which can be played.
Arterial
Restaurants
Automotive
Hyundai Dealership
County
APPENDIX
The iPod is not
recognized even though
it has been connected.
Map legend
Solution
The DISC is dirty or scratched.
The sound or video
quality is low.
Collector
Local
Motorcycle Dealeship
Travel
Representation
7-4 APPENDIX
APPENDIX 7-5
PART 7 APPENDIX
POI icons
No
Category
POI icons
Sub Category
Icon
No
Category
Sub Category
Icon
No
Category
Sub Category
Icon
No
Category
Landmark icons
Sub Category
Icon
No
Category
Sub Category
Icon
No
Category
Sub Category
Icon
Airport
31
Airport
46
Shopping Center
61
Sports Activities
76
Police Station
91
Photography
32
Hotel
47
Music Store
62
Sports Complex
77
Post Office
92
Tax Service
33
Tourist Information
48
Grocery Store
63
Golf Course
78
Library
93
Medical Service
Golf
34
Travel Agent
49
Bookstore
64
Winery
79
Court House
94
Attorney
University
Fire Department
95
Funeral Director
Park
Service
Recreation
35
Tourist Attraction
50
Shopping
Electronics
65
Video & Game Rental
80
Popular Spot
51
Hardware Store
66
Ski Resort
81
Convention Center
96
37
Rental Car Agency
52
Gifts
67
Recreation Area
82
City Hall
97
38
Campground
53
Sporting Goods
68
Other Recreation
83
Civic Center
98
Social Service
39
Ferry Terminal
54
Home Specialty Store
69
Representation
84
School
99
Physician
40
Bus Station
55
Clothing
70
Bank
85
Government Offices
100
Communication
41
Local Transit
56
Shoe Store
71
ATM
86
Waste & Sanitary
101
Tailor & Alteration
42
Train Station
57
Representation
72
Check Cashing Service
87
Utilities
102
Mover
43
Representation
58
Amusement Park
73
Money Transfer
88
Representation
Business Facility
89
Representation
90
36
Travel
Community
Cleaning & Laundry
APPENDIX
Financial
Service
Hair & Beauty
Service
Recreation
44
Shopping
45
7-6 APPENDIX
Department Store
59
Museum
74
Convenience Store
60
Cinema
75
Community
Service
Hospital
Dentist
APPENDIX 7-7
PART 7 INDEX
A/C
Brightness
1-11
6-3
Current position map screen
(without route)
3-5
Displaying / Hiding Q.POI icons
3-9
Displaying /Hiding icons other than
Q.POI icons
3-9
Displaying the list
1-8
Activating call waiting
5-14
Adaptive volume control ON/OFF
3-52
Cabin temperature
Adding to address book
3-27
Call history
5-19
Deleting an address book
3-47
Adding waypoints
3-32
CD
2-14
Deleting an address of address book
3-46
CD screen and functions
2-14
Deleting all avoid area
3-41
Editing an address of address book
Changing destination position
3-27
Deleting all paired phones
5-28
Deleting avoid area
3-41
Adjusting audio volume
Advanced settings
Air conditioning system
1-8
5-26
6-3
GPS signal reception state
Listening to the XM radio
Editing avoid area
3-40
How to operate the screen menu
1-8
Editing waypoints
3-32
Ejecting a disc
2-13
6-3
Changing the map scale
3-8
Changing route option
3-32
Deleting a paired phone
5-6
Auto volume control ON/OFF
1-11
Changing passkey
5-28
Deleting Favorite place
3-50
Enable streaming audio
5-26
Important information about this manual
AUX
2-29
CLIMATE
6-2
Deleting Home address
3-48
Ending a call
5-15
Initializing Bluetooth handsfree
AUX screen
2-29
Clock Setup
Deleting waypoints
3-34
Initializing system
Answering an incoming call
5-13
Command list of Audio/Video system
Destination menu screen and functions
3-12
Basic operation and setting
5-27
FAD/BAL
Command list of Navigation system
4-12
3-36
5-11
Making a call from Speed Dial
5-11
5-29
Making a call by redialing
5-12
3-38
Making a call from the Phone book
5-16
Making a call from Call history
5-19
3-10
3-5
1-2
Device name
5-27
Fan direction
6-4
Inserting a disc
2-13
Condition for voice command system
4-2
Device address
5-27
Fan level
6-5
Inserting/Ejecting disc
2-13
Map legend
1-7
Condition for voice recognition system
1-9
Disable streaming audio
5-26
Connections
5-7
Disc/content format compatibility
2-12
Finishing route guidance
(Delete destination)
4-2
Before thinking the product has
malfunctioned
Display mode
1-11
FM/AM screen and functions
5-2
Connecting iPod device
2-22
Display OFF
1-11
For safe and efficient operation
Bluetooth handsfree
5-2
Connecting the USB
2-28
Display ON
1-11
Bluetooth handsfree mode
5-2
Control panel
1-3
Display setting
1-11
Controller and functions
1-3
Displaying / Hiding POI icons on the map
Connecting AUX
Connecting a mobile phone
5-24
2-29
5-7
Disconnecting a mobile phone
5-8
3-9
FM/AM Radio
Introduction
3-30
2-2
1-2
iPod
2-22
iPod screen and functions
2-23
2-2
2-10
Giving voice command
1-8
1-10
Landmark icons
5-11
Language code
7-7
Limitations of the navigation system
3-37
7-5
MP3
2-17
MP3 disc related information and
precaution
2-17
MP3 screen and functions
2-18
My places setting
3-43
INDEX
Basic operation for voice command
control
Bluetooth settings
Inputting letters by using screen
keyboard
Main setting
1-11
1-10
2-6
2-38
Making a call by dialing a phone number
Making a call to POI
Map Functions
BASS/MID/TREB
Device information
2-2
Listening to USB music
1-9
4-18
2-18
Listening to the FM/AM radio
3-54
3-45
Command list of Help
2-22
5-25
How to operate a menu by
voice command
2-14
Listening to MP3 music
Help
5-21
4-6
Listening to CD music
Listening to iPod music
Handsfree volume
Audio streaming
3-37
3-2
Navigation setting
7-8 APPENDIX
3-38
APPENDIX 7-9
PART 7 INDEX
3-13
Setting detour distance
3-35
3-27
Region code
Searching a POI
3-20
Setting estimate travel time
3-42
Steering wheel remote controller
1-4
USB
2-26
3-28
Registering avoid area
3-38
Searching a previous destination
3-17
Setting keyboard for inputting letter
3-36
Storing FM/AM preset
2-4
Operating the CDP
2-10
Registering Favorite place
3-49
Searching an address
3-13
Setting Q.POI icons
3-42
Storing XM preset
2-9
USB MP3 related information and
Precaution
2-26
Operating the external devices
3-48
Searching for emergency facilities
3-25
Setting random function for MP3 file
2-20
Supported disc formats
2-11
Searching an intersection
3-17
Setting random function for iPod song
2-25
Switching call to the mobile phone
5-14
5-6
2-22
Registering home address
Operating the radio
2-2
Operating typical screen menu
1-8
Registering new address in
address book
3-43
2-16
4-2
Rejecting an incoming call
5-13
Searching destination by
voice command
Setting random function for CD music
Operating voice command
4-19
Setting repeat function for MP3 file
2-20
Re-ordering waypoints
3-34
Searching favorite places
3-26
Setting repeat function for CD music
2-15
Starting route guidance
Searching a destination
Operating after searching a destination
Operating after setting a destination
Switching map mode
(north up/heading up)
REW/FF CD track
2-15
Searching from address book
3-24
Setting repeat function for iPod song
2-25
Switching the XM mode
(channel/category)
Pairings
5-4
REW/FF iPod song
2-24
Searching from map
3-26
Setting units (mi/km)
3-38
System information and update
Pairing a mobile phone
5-4
REW/FF MP3 file
2-20
Searching POI by local POI list
3-26
Setting up the voice command system
Passkey
5-5
Road color
Searching your home
3-25
Selecting an iPod song
2-23
Setting voice command feedback
ON/OFF
System Power ON
2-7
3-51
1-7
5-16
Route guidance screen
3-28
Selecting an item in a list
1-9
Setting voice Prompt ON/OFF
5-21
Route menu screen and functions
3-30
Selecting FM/AM broadcast frequency
2-3
Setup and Information
3-36
Troubleshooting
7-3
Playing AUX
2-29
Route overview(View Entire route)
3-31
Selecting other route
3-29
Setup menu screen and functions
3-36
Troubleshooting guide
7-2
3-4
Selecting the CD track
2-15
Sorting items from list
Selecting the MP3 file
2-19
Sound setting
1-10
Searching the Phone Book
5-17
Sorting call history
5-19
Turning the Audio ON/OFF
1-7
2-7
Speaker adaptation
4-4
Turning the power OFF
1-7
5-11
Turning the power ON
1-7
Precaution for safe usage
7-5
Route Re-calculation
1-2
Precautions upon handling discs
2-10
Precautions upon handling USB
2-26
Scanning CD track
Priority
5-24
Scanning FM/AM broadcast frequency
Private mode
5-14
Scanning MP3 file
Scanning XM broadcast channel
Scrolling map
7-10 APPENDIX
2-16
2-5
2-21
2-9
3-11
Selecting XM broadcast channel
Searcting a destination
3-13
Speed dial
Starting navigation system
1-9
Setting arrival time and distance display
3-38
Setting as destination/waypoint
3-27
Starting PHONE MUSIC
5-21
Setting avoid streets on route
3-35
Selecting PHONE MUSIC files
5-23
Voice command list
3-7
4-3
4-6
Voice guidance volume control
3-51
Voice guidance volume setting
3-51
Touch screen beep ON/OFF
1-11
Traffic Setup
3-52
Traffic Information
3-52
Waiting call switch
5-15
XM Radio
2-6
XM screen and functions
2-6
INDEX
5-16
4-4
Voice command help
2-20
Phonebook
3-37
3-3
Viewing detail information for MP3 file
Viewing GPS signal state
Phone music
3-4, 3-30
Vehicle position display
3-6
Phonebook download
POI icons
Route guidance
7-5
4-4
3-28
3-5
APPENDIX 7-11
MS
Microsoft Windows Automotive Operating System
Prolonged Views of Screen
Important Safety Information
Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before
Read and Follow Instructions
attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your
Before using your Windows Automotive-based system, read and follow all instructions and safety information provided in this end user manual
attention has been diverted away from your driving task at a critical time.
("User's Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences.
Volume Setting
Keep User's Guide in Vehicle
Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving.
When kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Windows Automotive-based
Driving while unable to hear these sounds could cause an accident.
system. Please make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions
and safety information carefully.
Navigation Features
Any navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please
Warning:
make certain all persons using this system carefully read and follow instructions and safety information fully.
Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or
other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle
Distraction Hazard
in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions you
Any navigation features may require manual (non-verbal) setup. Attempting to perform such set-up or insert data while driving can seriously
might be required to distract your attention away from the road and remove your hands from the wheel.
distract your attention and could cause an accident or other serious consequences. Stop the vehicle in a safe and legal manner before
attempting these operations.
General Operation
Let Your Judgment Prevail
Voice Command Control
Any navigation features are provided only as an aid. Make your driving decisions based on your observations of local conditions and existing
Functions within the Windows Automotive-based system may be accomplished using only voice commands. Using voice commands while
traffic regulations. Any such feature is not a substitute for your personal judgment. Any route suggestions made by this system should never
driving allows you to operate the system without removing your hands from the wheel.
replace any local traffic regulations or your personal judgment or knowledge of safe driving practices.
MS
MAP AS HOTLINE
Route Safety
M & SOFT AMERICA MAP CENTER
TEL : 888-757-0010
WEBSITE : www.mapnsoft.com
Do not follow the route suggestions if doing so would result in an unsafe or illegal maneuver, if you would be placed in an unsafe situation, or if
you would be directed into an area that you consider unsafe. The driver is ultimately responsible for the safe operation of the vehicle and
therefore, must evaluate whether it is safe to follow the suggested directions.
Potential Map Inaccuracy
Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and
common sense when following the suggested routes.
Emergency Services
Do not rely on any navigation features included in the system to route you to emergency services. Ask local authorities or an emergency services
operator for these locations. Not all emergency services such as police, fire stations, hospitals and clinics are likely to be contained in the map
database for such navigation features.
Use of Speech Recognition Functions
Speech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any speech
recognition functions included in the system and address any errors.
MEMO
MEMO
MEMO
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating
in conjunction with any other antenna or transmitter unless authorized to do so by the FCC.
IC Warning
Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Fonts Provider                  : ezPDFGate2006
Fonts Notice                    : ÀÌ PDF¿¡ Æ÷ÇÔµÈ ¼ŁÃ¼¸¦ ¼ŁÃ¼È¸»çÀÇ µ¿ÀǾøÀÌ ´Ù¸¥ ¸ñÀûÀ¸·Î »ç¿ëÇÏ¸é ¼ŁÃ¼È¸»çÀÇ ÀúÀÛ±ÇÀ» ħÇØÇÕ´Ï´Ù.
Create Date                     : 2009:07:03 17:57:10+09:00
Modify Date                     : 2009:07:09 16:07:06+09:00
Metadata Date                   : 2009:07:09 16:07:06+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:3FB46367AF67DE119315C35A0A5C8395
Instance ID                     : uuid:94122949-0515-4c23-97ea-b770ca82340e
Derived From Instance ID        : uuid:b2fd912b-5bac-4b75-b886-a7859cd590d5
Derived From Document ID        : uuid:8a712a01-942b-47ae-8f8a-81a88e40cf9a
Format                          : application/pdf
Creator                         : 200990_ym_mac
Title                           : HMC_BKa[E]_COVER
Has XFA                         : No
Page Count                      : 50
Author                          : 200990_ym_mac

EXIF Metadata provided by EXIF.tools