HYUNDAI MOBIS HA-T001 Remote Keyless Entry System User Manual 20061113 PA 433 RTTE FCC
Hyundai MOBIS Co., Ltd. Remote Keyless Entry System 20061113 PA 433 RTTE FCC
Users Manual
HYUNDAI AUTONET Co., Ltd.
San 136-1, Ami-ri, Bubal-eub, Ichon-si, Kyounki-do, 467-701, KOREA
Remote Keyless Entry
(HA-T001, HA-B001)
- INDEX -
- Description of Transmitter and BCM
- Block diagram from Transmitter and BCM
- An outline
- Circuit dia
g
ram from Transmitter and BCM
1. How to use HA-T001, HA-B001
- HA-T001 & HA-B001 is Remote Keyless System.
- This unit controll door lock/unlock with wireless.
- This unit consist of Transmitter(HA-T001) and Receiver(HA-B001)
- Every press the button, door lock and unlock is repeated.
2. Introduction of Transmitter(HA-T001)
- Transmitter has one button
- Transmitter use the battery
- Freqency is 433.92MHz
- Modulation item is SAW Resonator
- Transmitter use Rolling code algorithm
3. Introduction of BCM(HA-B001)
- Receiver control car door
- Receiver has RF module(433.92MHz)
- RF module use super-heterodyne circuit
- Receiver control door relay ,hazard relay
- Receiver has eeprom that save code
4. Regulatory Information
- THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
- Operation is subject to the following two conditions;
(1) this device may not cause harmful interface, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Chan
g
es and modifications not ex
p
ressl
y
a
pp
roved b
y
the
p
art
y
res
po
for com
p
liance could void the user's authorit
y
to o
p
erate the e
q
ui
p
me
n
An outline of Transmitter and BCM
1. PRIMARY FUNTION
- Remote door lock/unlock
- LED turn on ( When button is pushed )
- Operating distance : 30 m over
- Id input(setting mode)
2. ELECTRICAL CHARACTERISTICS
3. DESCRIPTION MODE
1) Mode
B+
KEYLESS
ACC
IG
SETTING
2) Id input(Setting Mode)
When Setting Mode, once the button push,
Operating frequency
Power 10mW under -
433.92㎒
Max 10mA
Sensitivity - -117dBm(typical)
model name HA-T001 HA-B001
ETC AM modulation Super-heterodyne
Operating temperature -20 ~ +55 ℃-20 ~ +55 ℃
Consumption current
OFF
Normal Mode
ON
Description of Transmitter and BCM
Operating voltage 3 VDC 10 ~ 16 VDC
TRANSMITTER BCM
use equipment
ID INPUT
(Setting Mode)
ON
-
-
OFF
OFF
Mode
- OFF
Product ;
Front View Bottom View
PCB Top View PCB Bottom View
A Picture of Transmitter
Product ;
TOP PATTERN BOTTOM PATTERN
PCB Pattern of a Transmitter