HYUNDAI MOBIS PA710PAGEBT CAR AUDIO User Manual PA710PAGEBT ATT C E G H I J

HYUNDAI MOBIS CO., LTD. CAR AUDIO PA710PAGEBT ATT C E G H I J

user manual

FCC ID: TQ8-PA710PAGEBT HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 F AX:+82 31 639 8525 www .hct.co.kr Report No. : HCTR1005FR15 1/1 ATTACHMENT E. - User Manual -
469Features of your vehicleAntennaD300102APARoof antenna (if equipped)Your car uses a roof antenna to receiveboth AM and FM broadcast signals. Thisantenna is a removable type. To removethe antenna, turn it counterclockwise. Toinstall the antenna, turn it clockwise.D300800AENHow car audio worksAM(MW, LW) and FM radio signals arebroadcast from transmitter towers locat-ed around your city. They are intercept-ed by the radio antenna on your car. Thissignal is then received by the radio andsent to your car speakers.When a strong radio signal has reachedyour vehicle, the precise engineering ofyour audio system ensures the best pos-sible quality reproduction. However, insome cases the signal coming to yourvehicle may not be strong and clear. Thiscan be due to factors such as the dis-tance from the radio station, closeness ofother strong radio stations or the pres-ence of buildings, bridges or other largeobstructions in the area.AUDIO SYSTEMOPA047097CAUTION• Before entering a place with a lowheight clearance, be sure that theantenna is fully folded down orremoved.• Be sure to remove the antennabefore washing the car in an auto-matic car wash or it may be dam-aged.• When reinstalling your antenna, itis important that it is fully tight-ened and adjusted to the uprightposition to ensure proper recep-tion. But it could be folded orremoved when parking the vehi-cle.¢¢¢JBM001FM receptionPA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 69
Features of your vehicle704AM(MW, LW) broadcasts can bereceived at greater distances than FMbroadcasts. This is because AM(MW,LW) radio waves are transmitted at lowfrequencies. These long, low frequencyradio waves can follow the curvature ofthe earth rather than travelling straightout into the atmosphere. In addition, theycurve around obstructions so that theycan provide better signal coverage.FM broadcasts are transmitted at highfrequencies and do not bend to follow theearth's surface. Because of this, FMbroadcasts generally begin to fade atshort distances from the station. Also,FM signals are easily affected by build-ings, mountains, or other obstructions.These can result in certain listening con-ditions which might lead you to believe aproblem exists with your radio. The fol-lowing conditions are normal and do notindicate radio trouble:• Fading - As your car moves away fromthe radio station, the signal will weakenand sound will begin to fade. When thisoccurs, we suggest that you selectanother stronger station.• Flutter/Static - Weak FM signals orlarge obstructions between the trans-mitter and your radio can disturb thesignal causing static or fluttering nois-es to occur. Reducing the treble levelmay lessen this effect until the distur-bance clears.¢¢¢¢¢¢JBM002 JBM003AM(MW, LW) reception FM radio station¢¢¢JBM004PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 70
471Features of your vehicle• Station Swapping - As a FM signalweakens, another more powerful sig-nal near the same frequency maybegin to play. This is because yourradio is designed to lock onto the clear-est signal. If this occurs, select anoth-er station with a stronger signal.• Multi-Path Cancellation - Radio signalsbeing received from several directionscan cause distortion or fluttering. Thiscan be caused by a direct and reflect-ed signal from the same station, or bysignals from two stations with closefrequencies. If this occurs, selectanother station until the condition haspassed.Using a cellular phone or a two-wayradio When a cellular phone is used inside thevehicle, noise may be produced from theaudio equipment. This does not meanthat something is wrong with the audioequipment. In such a case, use the cellu-lar phone at a place as far as possiblefrom the audio equipment.Care of discs• If the temperature inside the car is toohigh, open the car windows for ventila-tion before using your car audio.• It is illegal to copy and use MP3/WMAfiles without permission(If equippedwith SA710, use only CD-DA). UseCDs that are created only by lawfulmeans.• Do not apply volatile agents such asbenzene and thinner, normal cleanersand magnetic sprays made for ana-logue disc onto CDs.• To prevent the disc surface from get-ting damaged. Hold and carry CDs bythe edges or the edges of the centerhole only.• Clean the disc surface with a piece ofsoft cloth before playback (wipe it fromthe center to the outside edge).• Do not damage the disc surface orattach pieces of sticky tape or paperonto it.• Make sure on undesirable matter otherthan CDs are inserted into the CDplayer (Do not insert more than oneCD at a time).JBM005CAUTIONWhen using a communication sys-tem such a cellular phone or a radioset inside the vehicle, a separateexternal antenna must be fitted.When a cellular phone or a radio setis used with an internal antennaalone, it may interfere with the vehi-cle's electrical system and adverse-ly affect safe operation of the vehi-cle.WARNINGDon't use a cellular phone whenyou are driving. You should stop ata safe place to use a cellular phone.PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 71
Features of your vehicle724• Keep CDs in their cases after use toprotect them from scratches or dirt.• Depending on the type of CD-R/CD-RW CDs, certain CDs may not operatenormally according to manufacturingcompanies or making and recordingmethods. In such circumstances, if youstill continue to use those CDs, theymay cause the malfunction of your caraudio system.✽✽NOTICE - Playing anIncompatible CopyProtected Audio CDSome copy protected CDs, which do notcomply with the international audio CDstandards (Red Book), may not play onyour car audio. Please note that if youtry to play copy protected CDs and theCD player does not perform correctlythe CDs maybe defective, not the CDplayer.PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 72
473Features of your vehicleSA710PA1. FM/AM Selection Button2. Power ON/OFF3. AUTO STORE Button4. Automatic Channel Selection Button5. TUNE/AUDIO Control Button6. PRESET Button7. CD Selection Button8. SCAN ButtonRADIO, VOLUME CONTROL (SA710, if equipped)PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 73
Features of your vehicle7441. FM/AM Selection ButtonTurns to FM/AM mode and toggles FM1and FM2➟AM➟FM1··· when the button ispressed each time.2. Power ON/OFF & VloumeControl ButtonTurns ON/OFF the set when the IGNI-TION SWITCH is on ACC or ON.If the button is turned to the right, itincreases the volume and left, decreasesthe volume.3. AUTO STORE ButtonWhen the button is pressed, it automati-cally selects and saves channels withhigh reception rate to PRESET but-tons(1~6) and plays the channel saved inPRESET1.If no channel is saved after AST, it willplay the previous channel.4. Automatic Channel SelectionButtonWhen the [SEEK ] button is pressed, itreduces the band frequency by 50kHz toautomatically select channel.Stops at the previous frequency if nochannel is found.When the [SEEK ] button is pressed, itincreases the band frequency by 50kHzto automatically select channel.Stops at the previous frequency if nochannel is found.5. TUNE/AUDIO Control ButtonTurn this button clockwise by one notchto increase frequency by 50kHz from cur-rent frequency.Turn this button counterclockwise by onenotch to decrease frequency by 50kHzfrom current frequency.Turns to AUDIO CONTROL mode, andtoggles in the order of BASS➟MIDDLE➟TREBLE➟FADER➟BALANCE➟BASS··· when the button is pressed each time.GENERAL FM 100kHzAM 9kHzEUROPE FM 50kHzMW 9kHzLW 1kHz, 3kHz(AUTO)USA FM 200kHzAM 10kHz6. PRESET ButtonPush [1]~[6]button less than 0.8 sec toplay the channel saved in each button.Push preset button for 0.8 sec or longerto save current channel to the respectivebutton with a beep.7. CD Selection ButtonIf there is a cd in the CDP DECK it turnsto CD mode.8. SCAN ButtonWhen the button is pressed, it scan upfrom the current broadcast that received.In case of the broadcast having morethan the certain electric field, receive theappropriate broadcast for 5 sec.The frequency received is flickering for 5sec .When inputting SCAN KEY duringreceiving the broadcast for 5 sec, cancelthe operation of SCAN and receive thebroadcast flickering at that time.In case of no input for cancel afterinputting SCAN KEY, operate SCAN only1CYCLE.PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 74
475Features of your vehicleSA710PA1. CD loading slot2. CD Eject Button3. SCAN Play Button4. Automatic Track Selection Button5. CD-IN Indicator6. REPEAT Button7. RANDOM Play Button8. TUNE/ENTER Button9. Fast Rewind Button10. Fast Forward ButtonCD (SA710, if equipped)PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 75
Features of your vehicle7641. CD loading slotPlease face printed side upward andgently push in.When the ignition switch is on ACC orON and power is OFF, power is automat-ically turned on if the CD is loaded.This CDP support only 12cm CD. But ifVCD. Data CD are loaded, "Disc-Err"message will appear and CD will beejected.2. CD Eject ButtonPush button to eject the CD.This button is enabled when ignitionswitch is off.3. SCAN Play ButtonPlay first 10 sec of each song in theDISC.To cancel the mode, press the key onceagain.4. Automatic Track SelectionButton• Push [TRACK ] button for less than1 sec to play from the beginning of cur-rent song.• Push [TRACK ] button for less than1 sec and press again within 1 sec toplay the previous song.• In case of pushing, TRACK DOWNcontinually.• Push [TRACK ] button for less than1 sec to play the next song.• In case of pushing, TRACK UP contin-ually.5. CD-IN IndicatorWhen car ignition switch is ACC or ONand if the CD is loaded, this indicator islighted.If the CD is ejected the light is turned off.6. REPEAT ButtonRepeats current song when the button ispressed for less than 0.8 sec.Repeats the entire DISC when the buttonis pressed for 0.8 sec or longer.7. RANDOM Play ButtonTurns ON/OFF the randomization of theplay list of files in the currently playedDISC.To cancel the mode, press the key onceagain.8. TUNE/ENTER ButtonTurn this button clockwise to displaysongs after current song.Also, turn this button counterclockwise todisplay songs before current song.To listen to the displayed song, press thebutton to skip to the song and play.9. Fast Rewind ButtonPush and hold the “2 REW” Key, morethan 0.8sec : play the operation of FF onthe current TRACK.10. Fast Forward ButtonPush and hold the “3 FF” Key, more than0.8sec : play the operation of REW onthe current TRACK.PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 76
477Features of your vehiclePA710RDSPA1. FM Selection Button2. AM Selection Button3. TA Selection Button4. CD Selection Button5. AUX Selection Button6. Automatic Channel Selection Button7. Power ON/OFF & Volume Control Knob8. AUTO STORE Button9. Screen ON/ OFF Button10. SETUP Button11. TUNE/ENTER Knob12. PTY(FLDR) Button13. PRESET Button14. SCAN ButtonRADIO, SETUP, VOLUME CONTROL (PA710RDS, if equipped)PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 77
Features of your vehicle7841. FM Selection ButtonTurns to FM mode and toggles FM1 andFM2 when the button is pressed eachtime.2. AM Selection ButtonTurns to AM mode, and toggles in theorder of MW➟LW➟···➟MW···when thebutton is pressed each time.3. TA Selection ButtonIn FM, CD, AUX mode, turns on/off thereception of TA channels of RDS.4. CD Selection ButtonIf there is a cd in the CDP DECK it playsthe CD.Press CD button to automatically insertCD when the disc is ejected from thedeck by pressing CD EJECT.5. AUX Selection ButtonIf the auxiliary device is connected, itturns to AUX MODE to play the soundfrom the auxiliary player.If the auxiliary device is not connected, itdisplays “No AUX Input” for 5 sec andreturns to the previous mode.6. Automatic Channel SelectionButton• When the [SEEK ]button is pressed,it reduces the band frequency by50kHz to automatically select channel.Stops at the previous frequency if nochannel is found.• When the [SEEK ]button is pressed,it increases the band frequency by50kHz to automatically select channel.Stops at the previous frequency if nochannel is found.7. Power ON/OFF & VolumeControl KnobTurns on/off the set when the IGNITIONSWITCH is on ACC or ON. If the knob isturned to the right, it increases the vol-ume and left, decreases the volume.8. AUTO STORE ButtonWhen the button is pressed, it automati-cally selects and saves channels withhigh reception rate to PRESET buttons(1~6) and plays the channel saved inPRESET1.If no channel is saved after AST, it willplay the previous channel.9. Screen ON/ OFF ButtonTurns on/off the displayed data and lighton LCD.When LCD display is turned OFF, pressany button to turn ON diplay.10. SETUP ButtonPress this button to turn to the Audio,RDS option, Clock setting, Scroll,Display and Adjustment mode.If no action is taken for 5 sec after press-ing the button, it will return to the playmode.(After entering SETUP mode,move between items using the left, rightand PUSH functions of the TUNE but-ton.)The SETUP menu changes as belowtableBass > 00Middle > 00AUDIO Treble > 00Fader > F=RBalance > L=RReturnRDS AF > OnREG > OffPA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 78
479Features of your vehicle❈ TO SETUP CLOCKIf Audio is ON1. Press SETUP button.2. Select CLOCK menu by rotating/pressingTUNE knob.3. Select ADJUST and current hour willflash.4. Adjust hour by rotating TUNE knob.5. Press TUNE knob and now currentminute will flash.6. Adjust minute and push TUNE knobwhen finished.7. Press SETUP button or select RETURNto exit SETUP mode.If Audio is OFF1. Press SETUP button and current hourwill flash.2. Adjust hour and press TUNE knob.3. Rotate TUNE knob to adjust minutewhen the current minute is flashing.4. Push TUNE knob, and press SETUPbutton or select RETURN to exitSETUP mode.11. TUNE/ENTER KnobTurn this knob clockwise by one notch toincrease frequency by 0.05Mhz from cur-rent frequency.Turn this knob counterclockwise by onenotch to decrease frequency by 0.05Mhzfrom current frequency.Press this knob while holding SETUPbutton to activate / inactivate theitem.Select SETUP item using left andright function of the Tune knob.GENERAL FM 100kHzAM 9kHzEUROPE FM 50kHzMW 9kHzLW 1kHz, 3kHz(AUTO)USA FM 200kHzAM 10kHz12. PTY(FLDR) Button• Press this button to enter Program Typeselect mode.• Press Move[PTY . ] button orrotate TUNE knob when to searchProgram Type in RDS.• Press TUNE/ENTER knob to selectProgram Type, and program search willbe started from the current frequency.13. PRESET ButtonPush [1]~[6] buttons less than 0.8 sec toplay the channel saved in each button.Push PRESET button for 0.8 sec or longerto save current channel to the respectivebutton with a beep.14. SCAN ButtonIf the SCAN button is pressed duringreceiving the broadcast for 5 sec, if can-cels SCAN operation and receives thebroadcast flickering at that time.When inputting SCAN KEY duringreceiving the broadcast for 5 sec cancelthe operation of SCAN and receive thebroadcast flickering at that time.In case of no input for cancel afterinputting SCAN KEY, operate SCAN only1CYCLE.NEWS > OffRDS TA Vol > +05ReturnAdjust >Clock Display > 24HourUpdate > AutoReturnScroll > OnReturnPA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 79
Features of your vehicle8041. CD loading slot2. CD-IN indicator3. CD Eject Button4. AUX Selection Button5. Automatic Track Selection Button6. INFO Button7. TUNE/ENTER Knob8. REPEAT Button9. RANDOM Play Button10. SCAN Play Button11. MARK Play Button12. AUX IN13. Folder moving Button14. Fast Rewind Button15. Fast Forward ButtonPA710RDSPACD (PA710RDS, if equipped)PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 80
481Features of your vehicle1. CD loading slotPlease face printed side upward andgently push in. When the ignition switchis on ACC or ON and power is off, poweris automatically turned on if the CD isloaded. This CDP support only 12 cmCD. But if VCD, Data CD loaded, "Er-6"message will appear and CD will beejected.2. CD-IN Indicator When car ignition switch is ACC or ONand if the CD is loaded, this indicator islighted. If the CD is ejected the light isturned off.3. CD eject ButtonPush button to eject the CD. This but-ton is enabled when ignition switch is off.4. AUX Selection ButtonIf the auxiliary device is connected, itturns to AUX MODE to play the soundfrom the auxiliary player.If the auxiliary device is no connected, it dis-plays "No AUX Input" for 5 sec and returnsto the previous mode."5. Automatic Track SelectionButton• Push [TRACK ] button to play fromthe beginning of current song.• Push [TRACK ] button and pressagain within 1 sec to play the previoussong.• In case of keep pressing, track goesdown continually.• Push [TRACK ] button to play thenext song.• In case of keep pressing, track gose upcontinually.6. INFO ButtonDisplays the information of the currentCD TRACK in the order of DISCTITLE➟DISC ARTIST➟TRACK TITLE➟TRACK ARTIST➟TOTAL TRACK➟PlayScreen➟DISC TITLE➟···.(not displayed ifthe information is not available on theDISC.)7. TUNE/ENTER KnobTurn this knob clockwise to display songsafter current song.Also, turn this knob counterclockwise todisplay songs before current song.To listen to the displayed song, press theknob to skip to the song and play.8.REPEAT ButtonRepeats current song when the button ispressed for less than 0.8 sec.Repeats the entire DISC when the buttonis pressed for 0.8 sec or longer.If CD has folders in it, repeat current fold-er instead of entire DISC when the buttonis pressed for more than 0.8 sec.PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 81
Features of your vehicle8249. RANDOM Play ButtonTurns on/off the randomization of theplay list of files in the currently playedDISC.To cancel the mode, press the key onceagain.10. SCAN Play ButtonPlays first 10 sec of each song in theDISC.To cancel the mode, press the key onceagain.11. MARK Play ButtonPress the button for 0.8 sec or longer tomark or unmark the current song.Press the button for less than 0.8 to playcurrently marked song.12. AUX-INConnect auxiliary device and it will auto-matically turn to AUX mode.13. Folder moving Button• Moves [FLDR ] button child folder ofthe current folder and displays the firstsong in the folder. Press TUNE/ENTERknob to move to the folder displayed.It will play the first song in the folder.• Moves [FLDR ] button Parent folderand displays the first song in the folder.Press TUNE/ENTER knob to move tothe folder displayed. It will play the firstsong in the folder.14. Fast Rewind ButtonPush and hold the “4 REW” key, morethan 0.8sec : play the operation of FF onthe current TRACK.15. Fast Forward ButtonPush and hold the “1 FF” key, more than0.8sec : play the operation of REW onthe current TRACK.PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 82
483Features of your vehiclePA710PA1. FM Selection Button2. AM Selection Button3. CD Selection Button4. AUX Selection Button5. Automatic Channel Selection Button6. Power ON/OFF & Volume Control Knob7. AUTO STORE Button8. Screen ON/ OFF Button9. SETUP Button10. TUNE/ENTER Knob11. PRESET Button12. SCAN ButtonRADIO, SETUP, VOLUME CONTROL (PA710, if equipped)PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 83
Features of your vehicle8441. FM Selection ButtonTurns to FM mode and toggles FM1 andFM2 when the button is pressed eachtime.2. AM Selection ButtonTurns to AM mode, and toggles in theorder of AM1➟AM2➟AM1···when thebutton is pressed each time.3. CD Selection ButtonIf there is a cd in the CDP DECK it playsthe CD.Press CD button to automatically insertCD when the disc is ejected from thedeck by pressing CD EJECT.4. AUX Selection ButtonIf the auxiliary device is connected, itturns to AUX MODE to play the soundfrom the auxiliary player.If the auxiliary device is not connected, itdisplays “No AUX Input” for 5 sec andreturns to the previous mode.5. Automatic Channel SelectionButton• When the [SEEK ]button is pressed,it reduces the band frequency by50kHz to automatically select channel.Stops at the previous frequency if nochannel is found.• When the [SEEK ]button is pressed,it increases the band frequency by50kHz to automatically select channel.Stops at the previous frequency if nochannel is found.6. Power ON/OFF & VolumeControl KnobTurns on/off the set when the IGNITIONSWITCH is on ACC or ON. If the knob isturned to the right, it increases the vol-ume and left, decreases the volume.7. AUTO STORE ButtonWhen the button is pressed, it automati-cally selects and saves channels withhigh reception rate to PRESET buttons(1~6) and plays the channel saved inPRESET1.If no channel is saved after AST, it willplay the previous channel.8. Screen ON/ OFF ButtonTurns on/off the displayed data and lighton LCD.The screen and light will be turned on bypressing any button except ScreenON/OFF button when the screen isturned off.9. SETUP ButtonPress this button to turn to the Audio,Clock setting, Scroll, Display andAdjustment mode.If no action is taken for 5 sec after press-ing the button, it will return to the playmode.(After entering SETUP mode,move between items using the left, rightand PUSH functions of the TUNE but-ton.)The SETUP menu changes as belowtableBass > 00Middle > 00AUDIO Treble > 00Fader > F=RBalance > L=RReturnPA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 84
485Features of your vehicle❈ TO SETUP CLOCKIf Audio is ON1. Press SETUP button.2. Select CLOCK menu by rotating/pressingTUNE knob.3. Select ADJUST and current hour willflash.4. Adjust hour by rotating TUNE knob.5. Press TUNE knob and now currentminute will flash.6. Adjust minute and push TUNE knobwhen finished.7. Press SETUP button or select RETURNto exit SETUP mode.If Audio is OFF1. Press SETUP button and current hourwill flash.2. Adjust hour and press TUNE knob.3. Rotate TUNE knob to adjust minutewhen the current minute is flashing.4. Push TUNE knob, and press SETUPbutton or select RETURN to exitSETUP mode.10. TUNE/ENTER KnobTurn this knob clockwise by one notch toincrease frequency by 0.05Mhz from cur-rent frequency.Turn this knob counterclockwise by onenotch to decrease frequency by100kHz(0.05Mhz) from current frequency.Press this knob while holding SETUPbutton to activate / inactivate the item.Select SETUP item using left and rightfunction of the Tune knob.(0.05Mhz) is A-200PAS only.GENERAL FM 100kHzAM 9kHzEUROPE FM 50kHzMW 9kHzLW 1kHz, 3kHz(AUTO)USA FM 200kHzAM 10kHz11. PRESET ButtonPush [1]~[6] buttons less than 0.8 sec toplay the channel saved in each button.Push PRESET button for 0.8 sec or longerto save current channel to the respectivebutton with a beep.12. SCAN ButtonIf the SCAN button is pressed duringreceiving the broadcast for 5 sec, if can-cels SCAN operation and receives thebroadcast flickering at that time.When inputting SCAN KEY duringreceiving the broadcast for 5 sec cancelthe operation of SCAN and receive thebroadcast flickering at that time.In case of no input for cancel afterinputting SCAN KEY, operate SCAN only1CYCLE.Adjust >Clock Display > 24HourReturnScroll > OnReturnPA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 85
Features of your vehicle8641. CD loading slot2. CD-IN indicator3. CD Eject Button4. AUX Selection Button5. Automatic Track Selection Button6. INFO Button7. TUNE/ENTER Knob8. REPEAT Button9. RANDOM Play Button10. SCAN Play Button11. MARK Play Button12. AUX IN13. Folder moving Button14. Fast Rewind Button15. Fast Forward ButtonPA710PACD (PA710, if equipped)PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 86
487Features of your vehicle1. CD loading slotPlease face printed side upward andgently push in. When the ignition switchis on ACC or ON and power is off, poweris automatically turned on if the CD isloaded. This CDP support only 12 cmCD. But if VCD, Data CD are loaded, "Er-6" message will appear and CD will beejected.2. CD-IN Indicator When car ignition switch is ACC or ONand if the CD is loaded, this indicator islighted. If the CD is ejected the light isturned off.3. CD eject ButtonPush button to eject the CD. This but-ton is enabled when ignition switch is off.4. AUX Selection ButtonIf the auxiliary device is connected, itturns to AUX MODE to play the soundfrom the auxiliary player.If the auxiliary device is no connected, it dis-plays "No AUX Input" for 5 sec and returnsto the previous mode."5. Automatic Track SelectionButton• Push [SEEK ] button to play fromthe beginning of current song.• Push [SEEK ] button and pressagain within 1 sec to play the previoussong.• In case of keep pressing, track goesdown continually.• Push [SEEK ] button to play the nextsong.• In case of keep pressing, track goes upcontinually.6. INFO ButtonDisplays the information of the currentCD TRACK in the order of DISCTITLE➟DISC ARTIST➟TRACK TITLE➟TRACK ARTIST➟TOTAL TRACK➟PlayScreen➟DISC TITLE➟···.(not displayed ifthe information is not available on theDISC.)7. TUNE/ENTER KnobTurn this knob clockwise to display songsafter current song.Also, turn this knob counterclockwise todisplay songs before current song.To listen to the displayed song, press theknob to skip to the song and play.8. REPEAT ButtonRepeats current song when the button ispressed for less than 0.8 sec.Repeats the entire DISC when the buttonis pressed for 0.8 sec or longer.9. RANDOM Play ButtonTurns on/off the randomization of the playlist of files in the currently played DISC.To cancel the mode, press the key onceagain.PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 87
Features of your vehicle88410. SCAN Play ButtonPlays first 10 sec of each song in theDISC.To cancel the mode, press the key onceagain.11. MARK Play ButtonPress the button for 0.8 sec or longer tomark or unmark the current song.Press the button for less than 0.8 to playcurrently marked song.12. AUX-INConnect auxiliary device and it will auto-matically turn to AUX mode.13. Folder moving Button• Moves [FLDR ] button child folder ofthe current folder and displays the firstsong in the folder. Press TUNE/ENTERknob to move to the folder displayed.It will play the first song in the folder.• Moves [FLDR ] button Parent folderand displays the first song in the folder.Press TUNE/ENTER knob to move tothe folder displayed. It will play the firstsong in the folder.14. Fast Rewind ButtonPush and hold the “4 REW” key, morethan 0.8sec : play the operation of FF onthe current TRACK.15. Fast Forward ButtonPush and hold the “1 FF” key, more than0.8sec : play the operation of REW onthe current TRACK.PA eng 4-69~(Audio).qxd 1/15/2010 10:52 AM Page 88
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ˍ Reorient or relocate the receiving antenna. ˍ Increase the separation between the equipment and receiver. ˍ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ˍ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu