HYUNDAI MOBIS PA760BKCBXD Car Audio Bluetooth User Manual

Hyundai MOBIS Co., Ltd. Car Audio Bluetooth

User manual

FCC ID : PINPA760BKCBXD HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-R08-128 1/1ATTACHMENT H. -Hardware Manual -
1. FM/AM selection button2. SEEK ୸/୹button3. POWER on/off & volume control knob4. SCAN button5. Display6. Preset channel button7. SETUP Button8. TUNE FILE UP/DOWN button9. CD / AUX selection button10. XM selection button11. DISP selection buttonyhkpvSGzl{|wSG}vs|tlGjvu{yvsOwh^XWirsSG|zhP
1. FM/AM selection ButtonTurn to FM or AM mode, and toggles in the order of FM1˧FM2˧AM˧FM1... when the button is pressed each time.2. SEEK ୸/୹ButtonWhen the [SEEK ୸/୹] button is pressed, it increases / decreases the band frequency by 200kHz to automatically select channel. Stops at the previous frequency if no channel is found.3. POWER on/off & volume control buttonTurn on/off the set When the IGNITION SWITCH is on ACC or ON. If the button is turned to the right, it increases the volume and left, decreases the volume.4. SCAN ButtonIf this button is pressed, the frequencies will become increased and receive the corresponding broadcasts. This function8. TUNE FILE ୸/୹buttonWhen the [TUNE ୸/୹] button is pressed, it increases / decreases theband frequency by 200kHz from currentfrequency.9. CD/AUX selection buttonIf there is a CD in the CDP DECK it turns to CD mode, and if a device is connected to AUX then it toggles.CD ˧AUX ˧CD… when the button is pressed each time. (It will not turn to AUX if the auxiliary device is not connected)10. XM selection buttonWhen this button is pressed, the mode turns to XM satellite Radio.11. DISP selection buttonTurns on/off the displayed data and light on LCDwill play the frequencies for 5 seconds (XM MODE: 10 seconds) each and find other broadcasts as the frequency increases. Press the button again when desiring to continue listening to the currently playing broadcast.5. DisplayDisplay currently time, mode, frequency SCAN status and preset channel.6. Preset channel buttonPress [1] ~ [6] buttons less than 0.8 second to play the channel saved in each button. Press preset button for 0.8 second or longer to save current channel to the respective button with a beep7. SETUP ButtonPressing the button changed the CLOCK, TONE, POSITION, AVC, TEMP, SCROLL AND BLUETOOTH.
jkwOwh^XWirsSG|zhP1. RDM Play button 2. RPT button3. CD Loading Slot4. CD Eject button5. TRACK ୸/୹button6. SEEK ୸/୹button7. XM Selection button8. SCAN Play button9. Display10. CD Indicator11. CAT FOLDER ୸/୹button12. TUNE FILE ୸/୹button13. INFO button
1. RDM Play ButtonTurns on/off the randomization of the play list of files in the currently played DISC. To cancel the mode, press the button once again. If loaded CD has a file folder, RANDOM PLAY button operates below- Press button for less than 0.8 second to play randomized files in folder- Press button for 0.8 second or longer to play randomized all files in CD 2. RPT ButtonRepeats current song when the button is pressed for less than 0.8 second. Repeats the entire DISC when the button is pressed for 0.8 second or longer3. CD Loading SlotPlease face printed side upward and gently Press in. When the ignition switch is on ACC or ON and power is off, power is automatically turned on if the CD is loaded. This CDP supports only 12cm CD. If VCD, Data CD are loaded, “Reading Error”message will appear and CD will be ejected.4. CD Eject ButtonPress ̵button to eject the CD during CD playback. This button is enabled when ignition switch is off.5. TRACK ୸/୹Button-Press TRACK ୸button to play the next song.- Press TRACK ୹button to play from the beginning of current song and Press again to play the previous song.6. SEEK ୸/୹Button- Press SEEK ୸button to initiate high speed sound search of current song.- Press SEEK ୹button to initiate reverse direction high speed sound search of current song7. XM selection buttonWhen this button is pressed, the mode turns to XM satellite Radio8. SCAN play buttonPlay first 10 seconds of each song in the DISC. To cancel the mode, press the button once again9. DisplayDisplay currently time, mode, play track number, play time, RDM, RPT and SCAN status.10. CD indicatorWhen car ignition switch is ACC or ON and if the CD is loaded, this indicator is lighted. If the CD is ejected the light is turned off.
11. CAT FOLDER ୸/୹ButtonWhen loaded CD has file folders, FOLDER ୸/୹button operates belowPress FOLDER ୹button to move child folder of the current folder and displays the first song in the folder. Press ENTER button to move to the folder displayed. It will play the first song in the folder.Press FOLDER ୸button to move parent folder and displays the first song in the folder. Press ENTER button to move to the folder displayed.12. TUNE FILE ୸/୹BUTTONWhen loaded CD has a mp3 or WMA files , TUNE FILE ୸/୹button operates belowPress TUNE FILE ୸button to play next songPress TUNE FILE ୹button to play previous song13. INFO buttonDisplays the information of the current CD TRACK in the order of DISC TITLE ˧DISC ARTIST ˧TRACK TITLE ˧TRACKARTIST ˧TOTAL TRACK ˧play screen ˧DISC TITLE ˧…(not displayed if the information is not available on the DISC.)
|zpunG|ziOwh^XWirsSG|zhP1. RDM Play button 2. RPT button3. TRACK ୸/୹button4. SEEK ୸/୹button5. CD / AUX selection button6. SCAN play button7. Display8. FOLDER ୸/୹button9. TUNE FILE ୸/୹button10. INFO button
1. RDM Play ButtonPress the button for less than 0.8 second to start or stop the random playback of the songs in the current folder.Press the button for more than 0.8 second to randomly play the entire songs in the USB device. Press the button again to cancel the mode2. RPT ButtonPress the button for less than 0.8 second to repeat the song currently played.Press the button for more than 0.8 second to repeat the entire songs in the USB device.3. TRACK ୸/୹buttonPress the TRACK ୹button to play from the beginning of the song currently played. And press it again to move and play the previous track.Press the TRACK ୸button to move to the next track.4. SEEK ୸/୹buttonPress the SEEK ୹button to play the song in reverse direction in fast speedPress the SEEK ୸button to play the song in forward direction in fast speed5. CD / AUX selection buttonIf USB is connected, it switches to the USB mode from the CD mode to play the song files stored in the USB. If there are no CD and USB mode from the Radio mode, it displays “No Media”.6. SCAN play buttonPlays 10 seconds of each song in the USB device. Press the button once again to cancel scanning.7. DisplayDisplay currently time, mode, play track number, play time, RDM, RPT and SCAN status.8. FOLDER ୸/୹buttonPress FOLDER ୹button to move child folder of the current folder and displays the first song in the folder. Press ENTER button to move to the folder displayed. It will play the first song in the folder.Press FOLDER ୸button to move parent folder and displays the first song in the folder. Press ENTER button to move to the folder displayed.9. TUNE FILE ୸/୹buttonPress the TUNE FILE ୹button to play from the beginning of the song currently played. And press it again to move and play the previous track.Press the TUNE FILE ୸button to move to the next track.10. INFO buttonDisplays the information of the file currently played in the order of FILE NAME ˧TITLE ˧ARTIST ˧ALBUM ˧FOLDER ˧TOTAL FILE ˧NORMAL DISPLAY ˧FILE NAME ˧…(Displays no information if the file has no song information)
iPod is a trademark of Apple Inc.y|uupunGw Owh^XWirsSG|zhP1. RDM Play button 2. RPT button3. TRACK ୸/୹button4. SEEK ୸/୹button5. CD / AUX selection button6. SCAN play button7. Display8. FOLDER ୸/୹button9. TUNE FILE ୸/୹button10. INFO button
4. SEEK ୸/୹buttonPress the SEEK ୹button to play the song in reverse direction in fast speedPress the SEEK ୸button to play the song in forward direction in fast speed5. CD / AUX selection buttonIf iPod is connected, it switches to the iPodmode from the CD mode to play the song files stored in the iPod. If there are no CD and AUX mode from the Radio mode, it displays “No Media”.6. SCAN play buttonPlays 10 seconds of each song in the iPoddevice. Press the button once again to cancel scanning.7. DisplayDisplay currently time, mode, play track number, play time, RDM, RPT and SCAN status.8. FOLDER ୸/୹buttonPress FOLDER ୹button to move the category and displays the first song in the category. Press ENTER button to move to the category displayed. It will play the first song in the folder.Press FOLDER ୸button to move the category and displays the first song in the category. Press ENTER button to move to the category displayed.9. TUNE FILE ୸/୹buttonPress the TUNE FILE ୹button to play from the beginning of the song currently played. And press it again to move and play the previous track.Press the TUNE FILE ୸button to move to the next track.10. INFO buttonDisplays the information of the file currently played in the order of TITLE ˧ARTIST ˧ALBUM ˧NORMAL DISPLAY ˧TITLE ˧…(Displays no information if the file has no song information)1. RDM Play ButtonPress the button for less than 0.8 second to to activate or deactivate the random playback of the songs within the current category. Press the button for longer than 0.8 second to randomly play all songs in the entire album of the iPod. Press the button once again to cancel the mode.2. RPT ButtonPress the button for less than 0.8 second to repeat the song currently played.Press the button for more than 0.8 second to repeat the entire songs in the iPod.3. TRACK ୸/୹buttonPress the TRACK ୹button to play from the beginning of the song currently played. And press it again to move and play the previous track.Press the TRACK ୸button to move to the next track.
tGzh{lssp{lGyhkpvGOwh^XWirsSG|zhP1. XM selection button2. SEEK ୸/୹button3. POWER on/off & volume control button4. SCAN button5. Display6. Preset channel button7. SETUP Button8. CAT FOLDER ୸/୹button
1. XM selection buttonTurns to XM Satellite Radio mode. XM mode toggles in order to XM1 ˧XM2 ˧XM3 ˧XM1... When the button is pressed each time.2. SEEK ୸/୹button- Press SEEK ୹button to continously move to previous channel- Press SEEK ୸button to continously move to next channel3. POWER on/off & volume control buttonTurn on/off the set When the IGNITION SWITCH is on ACC or ON. If the button is turned to the right, it increases the volume and left, decreases the volume.4. SCAN buttonPress to hear a brief sampling of all channel. To cancel the SCAN mode, press the button once again5. DisplayDisplay currently time, mode, station name, category.6. Preset channel buttonPress [1] ~ [6] buttons less than 0.8 second to play the channel saved in each button. Press preset button for 0.8 second or longer to save current channel to the respective button with a beep7. SETUP buttonPressing the button changed the CLOCK, TONE, POSITION, AVC, TEMP, SCROLL AND BLUETOOTH.8. CAT FOLDER ୸/୹button- Press CAT FOLDER ୹button to search previous category.- Press CAT FOLDER ୸button to search next category.To listen to the displayed category, press the ENTER button. To search channel in displayed category, press the SEEK ୸/୹button. (CATEGORY icon is will be turned on in Category mode)
yhkpvSGzl{|wSG}vs|tlGjvu{yvsOwh^]WirsSG|zhP1. FM/AM selection button2. SEEK TRACK ୸/୹button3. POWER on/off & volume control button4. SCAN button5. Display6. Preset channel button7. SETUP Button8. TUNE FILE UP/DOWN button9. CD / AUX selection button10. XM selection button11. DISP selection button
1. FM/AM selection ButtonTurn to FM or AM mode, and toggles in the order of FM1˧FM2˧AM˧FM1... when the button is pressed each time.2. SEEK TRACK ୸/୹ButtonWhen the [SEEK ୸/୹] button is pressed, it increases / decreases the band frequency by 200kHz to automatically select channel. Stops at the previous frequency if no channel is found.3. POWER on/off & volume control buttonTurn on/off the set When the IGNITION SWITCH is on ACC or ON. If the button is turned to the right, it increases the volume and left, decreases the volume.4. SCAN ButtonIf this button is pressed, the frequencies will become increased and receive the corresponding broadcasts. This function8. TUNE FILE ୸/୹buttonWhen the [TUNE ୸/୹] button is pressed, it increases / decreases theband frequency by 200kHz from currentfrequency.9. CD/AUX selection buttonIf there is a CD in the CDP DECK it turns to CD mode, and if a device is connected to AUX then it toggles.CD ˧AUX ˧CD… when the button is pressed each time. (It will not turn to AUX if the auxiliary device is not connected)10. XM selection buttonWhen this button is pressed, the mode turns to XM satellite Radio.11. DISP selection buttonTurns on/off the displayed data and light on LCDwill play the frequencies for 5 seconds (XM MODE: 10 seconds) each and find other broadcasts as the frequency increases. Press the button again when desiring to continue listening to the currently playing broadcast.5. DisplayDisplay currently time, mode, frequency SCAN status and preset channel.6. Preset channel buttonPress [1] ~ [6] buttons less than 0.8 second to play the channel saved in each button. Press preset button for 0.8 second or longer to save current channel to the respective button with a beep7. SETUP ButtonPressing the button changed the CLOCK, TONE, POSITION, AVC, TEMP, SCROLL AND BLUETOOTH option mode.
jkjOwh^]WirsSG|zhP1. RDM Play button 2. RPT button3. CD Loading Slot4. CD Eject button5. SEEK TRACK ୸/୹button6. DISC୸/୹button7. XM Selection button8. SCAN Play button9. LOAD button10. CAT FOLDER ୸/୹button11. TUNE FILE ୸/୹button12. INFO button13. Display
1. RDM play buttonTurns on/off the randomization of the play list of files in the currently played DISC. To cancel the mode, press the button once again. If loaded CD has a file folder, RANDOM PLAY button operates below- Press button for less than 0.8 second to play randomized files in folder- Press button for 0.8 second or longer to play randomized all files in CD 2. RPT buttonRepeats current song when the button is pressed for less than 0.8 second. Repeats the entire DISC when the button is pressed for 0.8 second or longer3. CD Loading SlotPlease face printed side upward and gently Press in. When the ignition switch is on ACC or ON and power is off, power is automatically turned on if the CD is loaded. This CDP supports only 12cm CD. If VCD, Data CD are loaded, “Reading Error”message will appear and CD will be ejected.4. CD Eject button-Press ̵button for less than 0.8 second to eject the CD during CD playback. -Press ̵button for 0.8 second or longer to eject all the CD in deck- This button is enabled when ignition switch is off.5. SEEK TRACK ୸/୹button- Press SEEK TRACK ୹button for less than 0.8 second and press again with 1 seconds to play the previous song.- Press SEEK TRACK ୹button for 0.8 second or longer to initiate reverse direction high speed sound search of current song- Press SEEK TRACK ୸button for less than 0.8 second to play the next song- Press SEEK TRACK ୸button for 0.8 second or longer to initiate high speed sound search of current song6. DISC ୸/୹button- Press DISC ୹button to change disc to the previous disc- Press DISC ୹button to change disc to the next disc7. XM selection buttonWhen this button is pressed, the mode turns to XM satellite Radio8. SCAN play buttonPlay first 10 seconds of each song in the DISC. To cancel the mode, press the button once again9. LOAD buttonPress LOAD button to load CDs to availavleCDC deck (from 1 ~ 6). Press LOAD button for more than 2seconds to load into all available decks. The last CD will play. 10 seconds idle status will disable loading precess.
10. CAT FOLDER ୸/୹ButtonWhen loaded CD has file folders, FOLDER ୸/୹button operates belowPress FOLDER ୹button to move child folder of the current folder and displays the first song in the folder. Press ENTER button to move to the folder displayed. It will play the first song in the folder.Press FOLDER ୸button to move parent folder and displays the first song in the folder. Press ENTER button to move to the folder displayed.11. TUNE FILE ୸/୹BUTTONWhen loaded CD has a mp3 or WMA files , TUNE FILE ୸/୹button operates belowPress TUNE FILE ୸button to play next songPress TUNE FILE ୹button to play previous song12. INFO buttonDisplays the information of the current CD TRACK in the order of DISC TITLE ˧DISC ARTIST ˧TRACK TITLE ˧TRACKARTIST ˧TOTAL TRACK ˧play screen ˧DISC TITLE ˧…(not displayed if the information is not available on the DISC.)13. DisplayDisplay currently time, mode, play track number, play time, RDM, RPT, current DISC and SCAN status.
|zpunG|ziOwh^]WirsSG|zhP1. RDM Play button 2. RPT button3. SEEK TRACK ୸/୹button4. CD / AUX selection button5. SCAN play button6. CAT FOLDER ୸/୹button7. TUNE FILE ୸/୹button8. INFO button9. Display
1. RDM Play ButtonPress the button for less than 0.8 second to start or stop the random playback of the songs in the current folder.Press the button for more than 0.8 second to randomly play the entire songs in the USB device. Press the button again to cancel the mode2. RPT ButtonPress the button for less than 0.8 second to repeat the song currently played.Press the button for more than 0.8 second to repeat the entire songs in the USB device.3. SEEK TRACK ୸/୹button-Press the SEEK TRACK ୹button for less than 0.8 sceond to play from the beginning of the song currently played. Press the button for less than 0.8 second and press it again within 1 seconds to move and play the previous track. press thhe button for 0.8 second or longer to play songs reverse direction in fast speed.- Press the SEEK TRACK ୹button for less than 0.8 second to move to the next track. Press the button for 0.8 second or longer toplay the song in forward direction in fast speed.4. CD / AUX selection buttonIf USB is connected, it switches to the USB mode from the CD mode to play the song files stored in the USB. If there are no CD and USB mode from the Radio mode, it displays “No Media”.5. SCAN play buttonPlays 10 seconds of each song in the USB device. Press the button once again to cancel scanning.6. CAT FOLDER ୸/୹buttonPress FOLDER ୹button to move child folder of the current folder and displays the first song in the folder. Press ENTER button to move to the folder displayed. It will play the first song in the folder.Press FOLDER ୸button to move parent folder and displays the first song in the folder. Press ENTER button to move to the folder displayed7. TUNE FILE ୸/୹buttonPress the TUNE FILE ୹button to play from the beginning of the song currently played. And press it again to move and play the previous track.Press the TUNE FILE ୸button to move to the next track.8. INFO buttonDisplays the information of the file currently played in the order of FILE NAME ˧TITLE ˧ARTIST ˧ALBUM ˧FOLDER ˧TOTAL FILE ˧NORMAL DISPLAY ˧FILE NAME ˧…(Displays no information if the file has no song information)9. DisplayDisplay currently time, mode, play track number, play time, RDM, RPT and SCAN status.
y|uupunGw Owh^]WirsSG|zhP1. RDM Play button 2. RPT button3. SEEK TRACK ୸/୹button4. CD / AUX selection button5. SCAN play button6. CAT FOLDER ୸/୹button7. TUNE FILE ୸/୹button8. INFO button9. DisplayiPod is a trademark of Apple Inc.
In case the iPod exclusive cable is connected to the multiple terminal inside the consol on the right hand side of the driver’s seat. When the iPod is connected, the ‘iPod’icon will be displayed 1. RDM Play ButtonPress the button for less than 0.8 second to to activate or deactivate the random playback of the songs within the current category. Press the button for longer than 0.8 second to randomly play all songs in the entire album of the iPod. Press the button once again to cancel the mode.2. RPT ButtonPress the button for less than 0.8 second to repeat the song currently played.Press the button for more than 0.8 second to repeat the entire songs in the iPod.3. TRACK ୸/୹buttonPress the TRACK ୹button to play from the beginning of the song currently played. And press it again to move and play the previous track.Press the TRACK ୸button to move to the next track.
tGzh{lssp{lGyhkpvGOwh^]WirsSG|zhP1. XM selection button2. SEEK ୸/୹button3. POWER on/off & volume control button4. SCAN button5. Display6. Preset channel button7. SETUP Button8. CAT FOLDER ୸/୹button
1. XM selection buttonTurns to XM Satellite Radio mode. XM mode toggles in order to XM1 ˧XM2 ˧XM3 ˧XM1... When the button is pressed each time.2. SEEK ୸/୹button- Press SEEK ୹button to continously move to previous channel- Press SEEK ୸button to continously move to next channel3. POWER on/off & volume control buttonTurn on/off the set When the IGNITION SWITCH is on ACC or ON. If the button is turned to the right, it increases the volume and left, decreases the volume.4. SCAN buttonPress to hear a brief sampling of all channel. To cancel the SCAN mode, press the button once again5. DisplayDisplay currently time, mode, station name, category.6. Preset channel buttonPress [1] ~ [6] buttons less than 0.8 second to play the channel saved in each button. Press preset button for 0.8 second or longer to save current channel to the respective button with a beep7. SETUP buttonPressing the button changed the CLOCK, TONE, POSITION, AVC, TEMP, SCROLL AND BLUETOOTH.8. CAT FOLDER ୸/୹button- Press CAT FOLDER ୹button to search previous category.- Press CAT FOLDER ୸button to search next category.To listen to the displayed category, press the ENTER button. To search channel in displayed category, press the SEEK ୸/୹button. (CATEGORY icon is will be turned on in Category mode)
YXGZGThis equipment has been tested and found to comply with the limits for a Class B digital device ,pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC RF Radiation Exposure Statement: 1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Navigation menu