Hach Sc1000 Users Manual DOC023.53.90007

2015-02-09

• Section 1 Specifications
• Section 2 General Information
  • 2.1 Safety information
    • 2.1.1 Use of hazard information
    • 2.1.2 Precautionary labels
  • 2.2 General product information
  • 2.3 Controller storage
• Section 3 Installation
  • 3.1 Mechanical installation
    • 3.1.1 Controller dimensions
  • 3.2 Mounting the controller
    • 3.2.1 Wall mounting
    • 3.2.2 Vertical or horizontal pipe mounting
    • 3.2.3 Panel Mounting
    • 3.2.4 Sun-shield
  • 3.3 Wiring safety information
    • 3.3.1 Electrostatic discharge (ESD) considerations
  • 3.4 Electrical installation
    • 3.4.1 Installation in hard-wired applications
    • 3.4.2 Installation using a power cord
    • 3.4.3 Wiring for AC power at the controller
    • 3.4.4 Wiring for 24 VDC power at the controller
  • 3.5 DIN rail expansion modules
  • 3.6 Expansion cards
    • 3.6.1 Relay card connections
    • 3.6.2 Input card connections
    • 3.6.3 Output card connections
    • 3.6.4 Modbus card connections
    • 3.6.5 Profibus DP card connections
    • 3.6.6 Remove/Replace an expansion card
  • 3.7 Install an sc1000 network (sc1000 bus connection)
    • 3.7.1 sc1000 network connections
  • 3.8 Connect probes to the sc1000 controller
    • 3.8.1 Connect the probe data cable
    • 3.8.2 Add probe connections
    • 3.8.3 Connect AC powered sc probes
  • 3.9 Service port connection (LAN connection)
  • 3.10 GSM modem connection
    • 3.10.1 Safety precautions
    • 3.10.2 SIM card requirements
    • 3.10.3 Insert the SIM card into the display module
    • 3.10.4 Connect the external GSM antenna to the display module
  • 3.11 Storage card (SD card)
    • 3.11.1 Insert the storage card into the display module
    • 3.11.2 Prepare the storage card
• Section 4 System Start Up
• Section 5 Standard Operations
  • 5.1 The display module
    • 5.1.1 Attach the display module to the probe module
    • 5.1.2 Tips for the use of the touch screen
    • 5.1.3 The display modes
  • 5.2 The measured value display
    • 5.2.1 Daily and weekly trend lines
    • 5.2.2 Configure the measured value display
  • 5.3 The Graph display
  • 5.4 The Main menu display
  • 5.5 The alphanumeric keypad
  • 5.6 Calibrate the touch screen
  • 5.7 Specify the displayed language
  • 5.8 Set the time and date
  • 5.9 Set up system security (passcode protection)
    • 5.9.1 Set the passcode
  • 5.10 Add and remove favorites
  • 5.11 Add new components
  • 5.12 Configure the network modules (Profibus/Modbus cards)
    • 5.12.1 Configure the Profibus/Modbus card
    • 5.12.2 Error and status register
    • 5.12.3 Profibus/Modbus configuration example
  • 5.13 Remote control
    • 5.13.1 Prepare the LAN connection
    • 5.13.2 Set up the LAN connection
    • 5.13.3 Set up the dial-up connection
    • 5.13.4 Access the sc1000 controller through a web browser
  • 5.14 Log data
    • 5.14.1 Save log files to the storage card
    • 5.14.2 Save log files through browser access
    • 5.14.3 Remove log files through browser access
  • 5.15 Formula editor for output and relay card
    • 5.15.1 Add a formula
    • 5.15.2 Add a formula with measurement values from other probes
    • 5.15.3 Formula operations
• Section 6 Advanced Operations
  • 6.1 Sensor status menu
  • 6.2 Sensor setup menu
  • 6.3 System setup menu
    • 6.3.1 Output setup menu
    • 6.3.2 Current inputs menu
    • 6.3.3 Relay menu
      • 6.3.3.1 General relay settings (available in all relay working modes)
      • 6.3.3.2 Function set to ALARM working mode
      • 6.3.3.3 Function set to FEEDER CONTROL working mode
      • 6.3.3.4 Function set to 2 POINT CONTROL working mode
      • 6.3.3.5 Function set to WARNING working mode
      • 6.3.3.6 Function set to PWM CONTROL/LINEAR working mode
      • 6.3.3.7 Function set to PWM CONTROL/PID CONTROL working mode
      • 6.3.3.8 Function set to FREQ. Control / Linear working mode
      • 6.3.3.9 Function set to FREQ. Control/PID CONTROL mode
      • 6.3.3.10 Function set to TIMER working mode
      • 6.3.3.11 Function set to SYSTEM ERROR working mode
    • 6.3.4 Network Modules (Profibus, Modbus)
      • 6.3.4.1 Profibus
      • 6.3.4.2 Modbus
    • 6.3.5 GSM module
    • 6.3.6 Device management
    • 6.3.7 Display settings
    • 6.3.8 Browser access
    • 6.3.9 Storage card
    • 6.3.10 Security setup
  • 6.4 Test/Maint Menu
    • 6.4.1 Bus status
• Section 7 Maintenance
  • 7.1 General maintenance
  • 7.2 Fuse replacement
• Section 8 Troubleshooting
  • 8.1 General problems and GSM module errors
  • 8.2 GSM Module errors
  • 8.3 Error and warning messages
    • 8.3.1 Message type
    • 8.3.2 Message format
    • 8.3.3 Error and warning ID numbers
  • 8.4 SMS service
    • 8.4.1 Configure SMS destination
    • 8.4.2 SMS format
  • 8.5 Test the expansion cards in the Maintenance menu
    • 8.5.1 Test the output card
    • 8.5.2 Test the input card
    • 8.5.3 Test the relay card
• Section 9 Replacement Parts and Accessories
  • 9.1 Expansion cards
  • 9.2 External DIN rail modules
  • 9.3 Internal network components
  • 9.4 Accessories
  • 9.5 Replacement parts
  • 9.6 Exploded view drawings
• Section 10 Contact Information
• Section 11 Certification
• Appendix A DIN Rail Expansion Modules
  • A.1 Mount the DIN rail
  • A.2 Attach an expansion module
  • A.3 Attach the base module
  • A.4 Attach the external relay module
  • A.5 Attach the external output module
  • A.6 Attach the external input module
  • A.7 Dismantle the DIN rail