Haier Telecom 1007HC-CM210 USB modem User Manual HC CM210

Haier Telecom (Qingdao) Co., Ltd. USB modem HC CM210

manual

Micro Digital (Nanjing) Wireless Technologies Ltd. - 1 - CM210 Data Modem User Manual 1 Introduction Thank you for using CM210 Data Modem. To guarantee the CM210 always in its best condition, please read this manual carefully and keep it for further use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your CM210. With the CM210, you can easily: · Access the Internet · View the statistics · Make and answer calls · Use the call logs service · Send and receive message · Use the phonebook Features Technical Standard: CDMA2000 1X USB Interface Standard: USB 2.0 Full Speed Maximum Transmit Power:＞24dBm Data Rate: 153.6kpbs Frequency Band: 800 MHz Dimensions: 89×28×10.5mm Weight: 22g Operating Temperature:0℃ to 55℃ Storage Temperature:-20℃ to 65℃ Operating Humidity:5℃ to 95℃ Storage Humidity:5℃ to 95℃ System requirements To use the CM210, the following requirements are recommended for your computer: CPU: Pentium4 1GHz or above Memory: 256MB or above
Micro Digital (Nanjing) Wireless Technologies Ltd. - 2 - Hard Disk: 50MB free disk space OS: Windows 2000/XP/Vista or Macintosh Operating System Interface: USB1.1 or above Note: If the configuration of your computer is inferior to the recommended configuration, the running performance of the data modem may be affected. 2 Management Software Installation & Uninstalling The installation process is subject to different operating systems, such as Windows 2000, Windows XP, Windows Vista, Macintosh .During the actual installation, if any step differs from what is described here, follow the specific installation instructions. Installation 1. Put the CM210 into the USB interface; 2. The setup program starts automatically, and the CM210 installation interface is displayed later. 3. Follow the instructions of the program; 4. Once the installation completes, the shortcut icon for CM210 Manager appears on the desktop; 5. When the system prompts you that the installation is finished, click Finish to finish the installation of the CM210 Manager. Uninstalling Uninstalling the CM210 Manager through the Add / Remove in the Windows. Accessing & Exiting Accessing the CM210 Manager GUI 1. To start program, double-click the shortcut icon of the CM210 Manager on the desktop; 2. If you are prompted to enter PIN code, enter the correct one and click OK; You can try 3 times to enter your PIN code. If you failed to do that after 3 times, your R-UIM card would be locked, if this happens, use the PUK code to unlock it. You can try 10 times to enter your PUK code. If you failed to do that after 10 times, your
Micro Digital (Nanjing) Wireless Technologies Ltd. - 3 - R-UIM card cannot be used, if this happens, contact your network operator. If you failed to enter PIN or PUK code, you can click Cancel to skip over the authentication of the PIN code. Then, the functions related to the R-UIM card are not available for you. However, you can still make emergency calls. Exiting the CM210 Manager Click the button on the right corner on the interface. Instruction to the main interface The initial interface after the CM210 Manager starts is as follows. Shortcut Icon ：Access the Connect interface ：Start the default internet browser in your operating system ：Access the Usage interface ：Access the Call and Call log interface ：Access the SMS interface ：Access the Phonebook interface
Micro Digital (Nanjing) Wireless Technologies Ltd. - 4 - ：Access the Options interface : View the Help document 3 Main Function Internet Service 1. Choose a profile and click Connect to set up a connection; 2. When the connection is set up, click or start the browser on your computer, and then you can access the internet; 3. Click Disconnect to disconnect from the network. Usage Service Click and access the Usage interface. You can view the content of the statistics, including sent and received statistic values and the duration of the connection. You can select the operation you need. The operation options are: Reset statistics, Expand all, Collapse all. Reset statistics Clear the statistic information Expand all Start all of the data Collapse all Close all of the data Note: The above data of the statistic is for your reference only. Call Service When you use the call service, you need to insert the earphone to the earphone jack on the CM210. Click to display the Voice Call and History interface. Make a call The CM210 provides many easy and quick ways to make a call. Entering a telephone number directly You can make a call by entering a telephone number directly. 1. Click the telephone keypad on the call interface;
Micro Digital (Nanjing) Wireless Technologies Ltd. - 5 - 2. Click Dial to make a call; 3. Click End to hang up. Note：·You can press Clear to delete number on the call interface digit by digit. ·You can press and hold Clear to clear the whole number. Selecting a telephone number in the phonebook You can make a call by selecting a telephone number in the phonebook. 1. Click Contacts and the phonebook interface is displayed. Double-click a contact or select a contact and then click Dial. · If only one number in the selected contact, then the number is displayed on call interface and dial out. · If t w o or m ore numb er(s) i n t h e s e l ected con t a c t, doubl e-c l i c k the selected number in the pop-up Select interface or click OK after selecting the number. The selected number is displayed on the call interface and dial out. 2. Click End to hang up. Selecting a recently dialed number You can make a call by selecting a number from the recently dialed number. 1. Click Dialed/Received/Missed, and click Dial after selecting the number. Then the number is dialed out. 2. Click End to hang up. Answering a call An alert window is displayed when there is an incoming call. You can choose the options in the follow. 1. Click Answer to answer the call 2. Click Reject to reject the call Volume Adjustment You can adjust volume during the call. Call History The call history contains information about dialed, received and missed calls. Each kind of call supports up to 100 items.
Micro Digital (Nanjing) Wireless Technologies Ltd. - 6 - Dialed/Received/Missed calls Click Dialed/Received/Missed, and the Dialed/Received/Missed calls interface is displayed. Saving a number 1. Select an item and click Save; 2. The Select Position interface is displayed, and select the position you want to save; 3. Click OK; 4. The New Contact interface is displayed. Enter required relevant information for this contact. 5. Click OK to save the contact. Deleting a call You can delete one or more item(s) from the call history. 1. Select one or more item(s), click Delete; 2. Click OK to confirm. Making a call You can dial the number of the call history. 1. Select an item and click Dial; 2. The Dial interface is displayed, and the selected number appears automatically on the interface, and dialed out at the same time. Sending a message You can send a message to the number of the call history. 1. Select one or more item(s) and click SMS; 2. The CM210 automatically retrieves the number in the selected items, and the Writ SMS interface is displayed. 3. The retrieved numbers are automatically displayed in the blank field behind the Contacts. Input the content for the message and click Send. SMS Click to display the SMS interface. Inbox
Micro Digital (Nanjing) Wireless Technologies Ltd. - 7 - The inbox stores messages you have received. It supports up to 300 messages. When the inbox is full and a new message is coming, the earliest message in the inbox is deleted automatically. Outbox The messages you have sent out are saved in the Outbox. Up to 300 messages can be stored in the Outbox. When the Outbox is full and an additional message is coming, the earliest message in the Outbox is deleted automatically. Draft The messages that you write on the Write SMS window, if having been saved, can be stored in the draft. Up to 300 messages can be stored in the draft. When you save a message, only the message content can be saved in the draft. The designated number cannot be saved. Archive The message you have copied from the inbox can be stored in the archive. Up to 300 messages can be stored in the Archive. The designate number cannot be saved. Viewing a message You can view a message in the Inbox/Outbox/Draft directly. 1. Click Inbox/Outbox/Draft/Archive to open and browser the Inbox/Outbox/Draft/Archive. 2. When there is a new message, you can see the alert window. Click View to view the message, Click Cancel to close the window. Writing a new message 1. Click New and the Write SMS interface is displayed; 2. Enter the telephone number(s) by one of the following ways: · To enter one or more number directly: In the Contacts textbox, enter the numbers separated by semicolons”;” · To select a number from the Contacts: Click Contacts. Select one or more contact(s) and click OK. Select the number to send a message in the pop-up dialog box and click OK. 3. Input the message. The maximum length of each message is 160 characters. 4. Click Send to send message. · After the message is sent successfully, it is automatically saved to the Outbox. If the message is sent unsuccessfully, you are prompted whether to send it again. If you cancel the sending, the message is saved to Outbox.
Micro Digital (Nanjing) Wireless Technologies Ltd. - 8 - Click Save to save message to the Draft. Click Clear to clear the message content. Click Template to insert template. Note: · The CM210 supports to send a message to a group of up to 40 numbers. · When your message contains no more than 160 characters, it is sent as one message. If this limit is exceeded, the message is divided to several messages and sent one by one. Replying a message You can reply to a message directly in the inbox. 1. Select a message and click Reply; 2. The telephone number of the original sender appears automatically in the blank filed behind Contacts and you can change it; 3. Input the content for the message to reply; 4. Click Send to reply a message. Forwarding a message In Inbox/Outbox/Draft, you can forward a message to other contacts. 1. Select a message and click Forward; 2. Input the telephone number to forward to, or click Contacts to select the number; 3. The content of the message to forward displays automatically in the text box. You can edit it. 4. Click Send to forward a message. Deleting a message In inbox/outbox/draft, you can delete a message. 1. Select one or more message(s) and click Delete; 2. Click OK to confirm. Extracting a number You can save the number of a message to the phonebook. 1. Select a message and click Extract; 2. The Select Number interface is displayed, select the number and click OK; 3. The Select Position interface is displayed, select the position and click OK; 4. Input the required information of this number; 5. Click OK.
Micro Digital (Nanjing) Wireless Technologies Ltd. - 9 - Searching a message The CM210 provides the function of search a message in the SMS. 1. Click Search; 2. Input the content in text box to search. Making a call You can call back the number of a message sender. 1. Select a message and click Dial; 2. The Dial interface is displayed. The number of the message sender is displayed and dialed out automatically at the same time. Editing a message In Outbox/Draft, you can edit a message. 1. Select a message and click Edit; 2. Change the information and click Send or Save. Phonebook Service The CM210 can store up to 500 contacts. You can New, Edit and Delete the contacts. You can also send message, make calls to the contacts. Click to display the phonebook interface. Creating a contact 1. Click New; 2. Fill in the name, mobile number, home number, company number, group, E-mail and remarks. 3. Click OK to save a new contact to the phonebook. Modifying a contact 1. Select a contact and click Edit; 2. Modify the contact; 3. Click OK to save. Deleting a contact 1. Select one or more contact(s) from the phonebook and click Delete;
Micro Digital (Nanjing) Wireless Technologies Ltd. - 10 - 2. Click OK to confirm. Grouping in the phonebook 1. Click Group; 2. Create or edit group; 3. Input the requited information of this group; 4. Click OK to save. Searching a contact The CM210 provides the function of searching a contact in the phonebook. 1. Click Search; 2. Enter relevant searching terms in the value text box to search. Making a call You can dial out the number you have selected from the phonebook. 1. Select the contact that contains the number to dial from the phonebook, and click Dial. If the selected contact contains only one telephone number, the dial interface is displayed automatically. If two or more telephone numbers are contained in the selected contact, the Select number interface is displayed and you are prompted select one number. After doing that, click OK and the dial interface is displayed. 2. The selected number is appears on the dial interface automatically and dialed out automatically at the same time. Sending a message The CM210 allow you to select a number from the phonebook and send a message. 1. Select a contact from the phonebook; 2. Click SMS and the Write SMS interface is displayed; 3. The Name or number appears in the blank field behind the Contacts. Input the content for the message and Click Send. Security and settings PIN Code Management The PIN code i s us ed to pre vent your R-UIM car d from the inv ali d u se. The PIN code is p rovided along with the R-UIM card. You can change your PIN code, and you can also enable/disable
Micro Digital (Nanjing) Wireless Technologies Ltd. - 11 - the PIN feature. If you enable the PIN feature, you need to enter the PIN code when the CM210 starts up. Enable/Disable PIN You can enable / disable PIN feature. If the feature is enabled, you need to enter a PIN code when the CM210 is started. Enable PIN You need to enter the PIN code when the CM210 is started. Disable PIN You need to not enter the PIN code when the CM210 is started. Modify PIN Enter the current PIN code and the new PIN code. Enter the new PIN code again to confirm it. Click OK to modify it. Unlock PIN If your R-UIM card locks, you can use the PUK code to unlock it. You can try 10 times to enter your PUK code. If you failed to do that after 10 times, you R-UIM card cannot be used. If this happens, contact your network operator. Text Message Setting Priority Select the priority level for sending a message. Validity Period In the period of validity, the message center will repeat to deliver a message till it is received. Defer Delivery Select the time for sending a message. Delivery Report You can enable or disable this function. If the function is enabled, after you send a message, the network can send a message to inform you that the receiver has got the message you have sent. Alert Window Check the box, and an alert window is displayed whenever a new message comes. · Click View to see the message · Click Cancel to close the window Alert tone If a sound file is selected, it plays on the earphone of CM210 whenever a new message comes. · Click Browse to select a sound file Network Setting
Micro Digital (Nanjing) Wireless Technologies Ltd. - 12 - CDMA Roaming You can choose no roaming or auto roaming in the window. Profile Setting Creating a profile 1. Click New; 2. Enter a new profile name in the Profile Name field 3. Enter required relevant information for the settings 4. Click Save to finish Deleting a profile 1. In the Profile Name field, select a profile to delete 2. Click Delete. Modifying a profile 1. In the Profile Name field, select a profile to modify 2. Click Edit 3. Modify the profile 4. Click Save. Preference Setting Start Up Setting You can set the CM210 Manager to connect internet when program starts up and Start main window minimized. Standby / Hibernate Setting You can set CM210 Manager to prevent or allow standby / hibernate. Usage Limit You need to enter the password when the feature of usage limit is used. The default password is blank. 1. Enter required relevant information for the settings. 2. Click Save. Diagnostics The CM210 allows you to query information for the CM210 and the R-UIM card.
Micro Digital (Nanjing) Wireless Technologies Ltd. - 13 - Help Document Click to display the Help interface. The CM210 provides the function of viewing help document.
Micro Digital (Nanjing) Wireless Technologies Ltd. - 14 - FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body is 1.031 W/kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. USB dongle transmitter is approved for use in typical laptop computers. To comply with FCC RF exposure requirements, it should not be used in other devices or certain laptop and tablet computer configurations where the USB connectors on the host computer are unable to provide or ensure the necessary operating configurations intended for the device and its users or bystanders to satisfy RF exposure compliance requirements. USB dongle transmitter is approved for use in typical laptop computers. To comply with FCC RF exposure requirements, this USB dongle should not be used in other devices or certain laptop and tablet computer configurations where the USB connectors on the host computer are unable to provide or ensure the necessary operating configurations intended for the device and its users or bystanders to satisfy RF exposure compliance requirements. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help

Navigation menu