Haier Telecom 1008HC-C1100 Mobile Phone User Manual HC C1100 User guide

Haier Telecom (Qingdao) Co., Ltd. Mobile Phone HC C1100 User guide

manual

Download: Haier Telecom 1008HC-C1100 Mobile Phone User Manual HC C1100 User guide
Mirror Download [FCC.gov]Haier Telecom 1008HC-C1100 Mobile Phone User Manual HC C1100 User guide
Document ID1343729
Application IDGatn325Yvzvx+Wt8889D0A==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize27.12kB (339002 bits)
Date Submitted2010-09-15 00:00:00
Date Available2010-09-15 00:00:00
Creation Date2010-09-09 17:28:12
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2010-09-09 17:28:12
Document TitleMicrosoft Word - HC-C1100_User guide.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Bfit.wu

Qingdao Haier Telecom Co. Ltd.
C1100_ Skylink _User Guide
=Copyright©2010 Haier Technologies Co.., Ltd
All Rights Reserved
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission as Haier Technologies Co.., Ltd.
Statement
The contents of this manual maybe different with the cell phone please according the cell
phone.
Haier Technologies Company reserves the right to revise this document or withdraw it at
any time without prior notice.
Safety Precautions
Please read these simple guidelines. Not following them may be dangerous or illegal.
Do not switch the phone on when Mobile Phone use is prohibited or when it may cause
interference or danger.
Do not place your phone and its accessories in containers with strong electromagnetic
field.
Obey all local laws. Always keep your hands free to operate the vehicle while driving.
Your first consideration while driving should be road safety.
Hospitals or health care facilities may be using equipment that could be sensitive to
external radio frequency energy. Follow any regulations or rules in force.
Do not use the phone at a refueling point. Do not use near fuel or chemicals.
Follow any restrictions. Wireless devices can cause interference in aircraft.
Keep the phone and all its parts, including accessories, out of the reach of small
children.
Use only approved batteries and chargers. Disconnect the charger from the power
source when it is not in use. Do not leave the battery connected to a charger for more
than a week, since overcharging may shorten its life.
Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
Qingdao Haier Telecom Co. Ltd.
C1100_ Skylink _User Guide
Phone appearance
Keys and Functions
Press…
To…
End (Power)
key
Making or answering a call.
In standby mode, press this key to access the All calls screen.
End calls or reject calls.
Long press: Power on, power off.
Left soft key
Select the option displayed on the lower left corner of the screen.
Send key
Right soft key
Navigation key
Number keys
Select the option displayed on the lower right corner of the screen.
Quick into Best tone,QQ,All contactsr and Messages menu.
Increase or decrease the volume during a call.
Enter numbers and characters.
Press and hold the 1-9 keys to dial speed-dial phone numbers.
·Enter the * symbol.
* key
·Press and hold to lock the keypad in idle mode
·Press twice to enter ‘+’ in idle mode.
·Press three times to enter ‘P’ in idle mode.
Qingdao Haier Telecom Co. Ltd.
C1100_ Skylink _User Guide
·Press four
times to enter ‘T’ in idle mode.
·Activate symbol mode.
·Enter the # symbol.
# key
·Press and hold to enable or disable the vibrator .
·Press to switch between different input method in writing mode.
Screen Icons
Icon
Description
Icon
Description
Network signal strength
Battery power level
New message received
Ringer mode
Alarm clock on
Silence mode
Roaming service mode
Vibrator enable
Installing the Battery
1.
2.
Place the battery in the battery compartment.
Close the battery cover by sliding the cover upwards.
Removing the Battery
1.
2.
3.
4.
Turn off your phone.
Remove the battery cover by sliding the cover downwards.
Use your fingernail to gently lift the upper edge of the battery outwards.
Take out the battery.
Qingdao Haier Telecom Co. Ltd.
C1100_ Skylink _User Guide
Charging the Battery
1.
2.
3.
4.
5.
Plug the charger transformer into a standard outlet.
Insert the charger output into charging port of the bottom of the phone
The rolling of the electric quantity bar indicates that the phone begins to charge.
When the battery level full and stop rolled, the phone will display ‘Battery full’.
After charging is complete, switch off the electric supply and pull out the charger’s
jack.
Using the Function Menu
1. In idle mode, press
2. Press
key to display the Menu interface.
key to scroll to a menu item.
3. Press
key to display the menu.
4. Display the submenu in either of the ways:
·
Press
key to scroll to a submenu item and press
key to display the
submenu.
· Press the number key corresponding to the number of a submenu to display it.
5. Press
Press
key to return to the previous menu or quit the function menu.
key to return to the idle screen.
Qingdao Haier Telecom Co. Ltd.
C1100_ Skylink _User Guide
Making a call
1. Dialing
Select a desired entry from the names list or directly type in the phone number in idle
key to dial.
mode, then press
2. Making an international call
Press double times the * key until "+" appears on screen.
Enter the country code, area code (without prefix zero) and phone number.
Press
3.
Ending a call
Press
key to dial.
key to end a call.
Receiving a call
1.
Press
key or any key (need setting) to answer the call.
[Silence] key once to close incoming ringer, then press
Or press
key again to receive the incoming call.
2.
Press
[Ignore] key or
[Answer]
key to reject the incoming call.
Phone Lock
The phone lock code is used to protect your phone from unauthorized use.
It can be set automatically to lock your phone each time it is switched on or when in idle
mode. In this condition, you can only dial emergency call.
Emergency call number is: 110,112,911,999.
When phone is locked, to unlock user must enter the preset security code (The default
code is 0000).
Keypad lock
The keypad lock can prevent you from accidental calls.
If the keypad is locked, it unlocks when you receive a call. After the call, the lock
automatically gets locked again.
When the keypad is locked, calls may be possible to the official emergency number
programmed in your phone.
Press Disabel and then press * to unlock the keypad.
Qingdao Haier Telecom Co. Ltd.
C1100_ Skylink _User Guide
Text input method
1. Your phone provides following text input methods:
English input method: input English characters.
Numeric input method: input numeric characters.
Chinese input method: input Chinese.
Input method
Multi-tap
Icon
Abc/En
Numeric
Chinese
ABC/EN
abc/en
123
拼/笔
Letter case
Word/sentence case text, only
available at the beginning of a
word/sentence.
Upper case
Lower case
Chinese
2. Change the input method
Short press
Press
to switch between Multi-tap, Numeric mode and Chinese.
Press
to insert common symbol under the multi-tap mode.
to enter symbol list;
Qingdao Haier Telecom Co. Ltd.
C1100_ Skylink _User Guide
RF Exposure Information
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. The model
(FCC ID: SG71008HC-C1100) has also been tested against this SAR limit. The highest
SAR value reported under this standard during product certification for use at the ear is
1.210 W/kg and when properly worn on the body is 0.525 W/kg. This device was tested for
typical body-worn operations with the back of the handset kept 1.5cm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that maintain
a 1.5cm separation distance between the user's body and the back of the handset. The
use of belt clips, holsters and similar accessories should not contain metallic components
in its assembly. The use of accessories that do not satisfy these requirements may not
comply with FCC RF exposure requirements, and should be avoided.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:09:09 17:28:12+08:00
Create Date                     : 2010:09:09 17:28:12+08:00
Format                          : application/pdf
Title                           : Microsoft Word - HC-C1100_User guide.doc
Creator                         : Bfit.wu
Document ID                     : uuid:0a4cdc70-4eda-4be4-b84b-c6998301cea2
Instance ID                     : uuid:15c4e007-0df0-4c25-90bd-c0fc4303fd50
Page Count                      : 7
Author                          : Bfit.wu
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SG71008HC-C1100

Navigation menu