Haier Telecom 1507L51 L51 User Manual

Haier Telecom (Qingdao) Co., Ltd. L51

User Manual rev3

  1 Content GettingStarted ...................................................................... 1 Know Your Phone ................................................................ 1 Removing the back cover.................................................... 2 Inserting the RUIM and SIMCard ....................................... 3 Inserting SD card ................................................................. 4 Charging the battery ........................................................... 4 Safety and Use ..................................................................... 5 Disclaimer ........................................................................... 11  GettingStarted Know Your Phone     Name  Function 1 Menu Key To enter the option menu 2 Home Key Short  Press  to  return  to  home screen and  long  press  to  show  the list off previous application opened
  2 3 Return Key  Return  to  the  previous  menu  or screen 4 Sensors None. 5 EarPiece/LoudSpeaker 1.Receiver  the  voice.  To  hear  the voice of the other side when calling 2.To  listen  to  music  and  other sounds offered by your phone. 6 Power Key Long  press  To  turn  on  /  off  the phone  from,  and  short  press  to turn on / off the screen backlight or screen lock the phone  7 Earphone Jack To connect your 3.5” hands free or audio portto connect an earphone, so you can listen to music/radio. 8 Micro-USB Port   To  connect  the  charger  or  data cableto  connect  charger  or  USB data cable for data exchange. 9 volume keys To adjust the ringer  volume, adjust the voice volume during a call, and adjust media volume 10 Flash Light  Brighten  the  environment  when you capture images.     11 Rear Camera  Capturing  images  using  rear camera  Removing the back cover You must remove the back cover to install SIM card and SD card. Hold the  lower  half of the  phone  with battery cover upwards, and  lift  the  bottom  of  the  battery  cover,  then  the
  3 battery cover can be removed.  Please turn the phone off before open the batteryto prevent damage Please be careful when opening the back cover, follow it accordingly to prevent damage  Inserting the RUIM and SIM Card You must insert RUIM card is on the phone to enjoy and enable all  the  features.  Your  card  contains  all  your  subscription information. Insert RUIM and  SIMcard with  the  metal  contacts facing  down and the cut corner is aligned with the cutting on the slot. If RUIM  card is not installed,  or  there are errors in the insertion, or the card is damaged, “No service”notification will appear on the screen after your phone is powered on.   If  the  PIN  is  enabled you  need  input  the  PIN number  to  unlock  it  before  you contrast using the phone   The GSM function will not work if the RUIM card is not present  Inserting SD card Insert  Micro  SD  card  with  the  metal  contacts  facing  down  and the cut corner aligned with that of the slot   Please insert or remove the Micro SD card when the phone is powered off, or the Micro  SD-Card or  the  phone  might get  damaged and  the data on  the  Micro SD-Card could be lost.
  4 You might need to restart your phone after setting the storage to SD-Card or when inserting an SD-Card.  Note: Your  phone  is  designed  to  be  used  only  with  the  original batteries and chargers. The use of other batteries or chargers is not recommended it may cause damage to your phone and the warranty will be void.  Charging the battery New batteries are shipped partially charged. Before you can use your phone, you need to charge the battery. Some batteries will have best performance after several full charge/discharge cycles, follow the instruction bellow: 1. Connect  data  cable  and  charger,  plug  one  end  into  your phone’s data port.     2. Plug  the  other  end  of  the  charger  into  the  appropriate electrical outlet (100~240V AC). 3. When  your  phone  indicates  that  the  battery  is  fully charged, remove the charger. Notes: ● The battery can discharge gradually even when your phone is powered off. If the battery is drained for a long time, the information stored in the phone could possibly be lost.   ● Even when you are not using the phone, it would be best to charge  your  phone  periodically  to  keep  it  away  from draining. ● If the  battery is  charged after draining, the  phone cannot be turned on. The battery needs to be charged for a while, after  ward  then  the  phone  will  go  to  power-off  charging
  5 mode and you can turned on the phone ● You need longer charging period with the lower voltage. ● Recommendations do not operate phone during charging. ● The normal charge temperature is during 0⁰C- 40⁰C.  Safety and Use Please read carefully and observe the  following regulations to avoid damaging your telephone or using it against the law. Electronic devices/Health care facilities. Turn  off  your  phone  when  you  are  near  high-precision  electronic devices in use to avoid causing malfunction or interfering with their operation  (fire  alarms,  automatic  doors  and  automatic  control equipment). Turn off  your  phone  in  hospitals or places where  the  use  of  mobile phones is  restricted. Mobile  phones  affect the normal  operation of electronic  devices  and  medical  instruments,  such  as  pacemakers, hearing aids and other electronic medical devices. Pacemaker manufacturers recommend that mobile phones are kept at  least  15  cm  away  from  pacemakers  to  prevent  the  phone interference.  When using the phone,  you  should hold it against the ear on the opposite side to the device, to reduce interference.       Mobile  phones  should  be  forbidden  inside  an  operating  theatre, Intensive Care Unit (ICU) or Cardiac Care Unit (CCU).   Pay attention to the settings of the sound volume and the vibration to avoid disturbing the patients.  Flammable or explosive areas Turn  off  your  phone  near  flammable  or  explosive  areas.  Do  not install/remove or charge the battery or use the phone in these areas to  prevent  any  explosion  or  fire.  Flammable  and  explosive  areas include:  chemical  plants,  facilities  with  chemical  substances  or particles in  the  air  (grains, dust and metal powder ), petrol stations and fuel depots, fuel storage areas (for example, under a ship’s deck),
  6 areas  with  explosion  warning  signs,  areas  with  “turn  off  two-way radio  equipment”  signs  and  places  where  you  are  usually recommended to switch off car engines.    Safety of use in a vehicle Please  observe  the relevant local  or  national regulations  related to the use of mobile phones in a vehicle. Please refrain from using the phone while driving. If you are driving and need to use the phone in an  emergency,  use  a  hands-free  device  (optional  purchase)  to  be safe. Otherwise, park the car before using the phone.   Do  not  place  your  phone  on  the  dashboard  or  within  an  airbag deployment  area  to  avoid  causing  injury  to  passengers  in  the  car when the bag inflates or bursts.    Using  the  phone  on  an  airplane  is  strictly  forbidden.  Turn  off  your phone  before you  board  an  aircraft.  It  is  recommended  to  remove the battery to avoid the phone being turned on accidentally.  Storing environment To  avoid  demagnetizing  problem,  keep  the  phone  away  from magnetic materials, such as magnetic discs and credit cards. Ensure that the phone does not come into contact with liquids. If it does, turn it off immediately, remove the battery and quickly contact the vendor. Do not store the phone or charger in an environment with a strong magnetic field, such as an electromagnetic pot or a microwave oven, to avoid causing the phone to malfunction, catch fire or explode.   Do  not  subject  the  phone,  battery  or  charger  to  heavy  impact  or vibration to avoid battery leakage, phone malfunction, overheating, fire or explosion Do not place sharp metallic items such as needles, near the receiver because the receiver will attract them and you may be injured when using the phone. Do not place the phone in the back pocket of your trousers or skirt to
  7 avoid damaging it when you sit down  Child health Keep the phone, battery and charger out of the reach of children. Do not  let  children  use  the  phone,  battery  or  charger  without supervision. Do not let a child put a battery in his/her mouth to avoid electrolyte poisoning. Keep  children  away  from  small  phone  accessories  to  prevent suffocation or blocking of the oesophagus as a result of swallowing.  Operating environment This phone is  equipped with a built-in antenna.  When  the  phone  is on,  unless  necessary,  do  not  touch  the  antenna  area  (top  of  the phone) for optimal communication quality. Do  not  use  your  phone  while  it  is  being  charged  during thunderstorms, or use it outdoors to avoid being struck by lightning or other injury. Do  not  use  your  mobile phone  in  dusty,  wet, dirty  places  or  places near  magnetic  fields  to  prevent  malfunction  of  its  internal  circuits. Keep  the  phone  as  dry  as  possible.  Keep  the  phone,  battery  and charger  away  from  water  and  water  vapour  and  do  not  clean  the phone  with  a  wet  cloth  to  avoid  short  circuits,  malfunction  due  to corrosion and electric shocks. Do not turn  in or off the  phone against your  ear  to  avoid your ears and body from being impaired. To  comply  with  regulations  on  radio  frequency  exposure,  keep  the antenna at least 1cm away from your body when holding your phone or using its data functions. If  you feel  unwell  (epileptic seizures or  blackouts) after  playing the games  with  your  phone  for  a  long  period  of  time,  please  seek medical assistance immediately. Move  your  mobile  phone  away  from  your  ear  while  using  the hands-free  mode,  because  the  amplified  volume  might  cause
  8 hearing damage. Make  sure  you  switched  off  your  phone  in  areas  where  mobile phone use is prohibited!  Cleaning and maintenance Switch off the phone before cleaning and maintenance. The charger should  be  unplugged  from  the  power  socket  and  the  phone  and charger disconnected to prevent any electric shock or short circuiting of the battery or charger. Do not wipe the phone or charger using chemical substance (alcohol benzene),  chemical  agents  or  abrasive  cleaning  agents  to  avoid damaging  its  parts  or  causing  a  malfunction.  You  may clean  with  a slightly damp anti-static soft cloth. Do not scrape or alter the phone case as paint substances may cause an allergic reaction. If such a reaction occurs, cease using the phone immediately and seek medical help.     Wipe dust off the power plug and keep it dry to avoid risk of fire If the phone or accessories do not work properly, contact your local vendor Do not dismantle the phone or its accessories yourself.  Protecting the environment Please  observe  the  local  regulations  on  phone  packaging,  battery and used phone disposal and bring them to the  collection point for proper  recycling.  Do  not  dispose  of  used  phones  or  batteries  in  a household rubbish bin. Please  take  your  used,  unwanted  lithium  batteries  to  a  designated place. Do not dispose of them in a rubbish bin.     Emergency call In an emergency situation, if the phone is on and you are within the
  9 network range, it can be used to make an emergency call. However, emergency call numbers may not be reachable on all networks; you should never rely on your mobile phone for emergency calls.  Using the battery and charger   Only use  batteries and  chargers  approved by  the  manufacturer.  Do not  use  batteries  or  chargers  that  are  not  compatible  with  your model to avoid any explosion.   Do not throw a battery in a fire as it might catch fire or explode. Do not  cause  a  short  circuit  to  the  charger  as  it  might  result  in malfunction, smoke or fire.     Do  not  place  conductors  like  metals,  keys  or  jewels,  against  the battery poles or allow them to touch the ends of the battery to avoid short circuiting the battery and causing injury (burns, for example) as a result of battery overheating   If  the  power  cable  is  damaged  (wires  exposed  or  broken)  or  the connection to the plug is loose, do not use it to avoid electric shock, short-circuit of the charger or a fire. Do not dismantle the battery or weld the two poles of the battery to prevent  the  battery  from  leaking,  overheating,  catching  fire  or exploding.   Keep the charger away from any container of water or other liquids. Infiltration of liquid may cause electric leakage or other malfunction to the charger. If  the  battery  leaks,  emits  smoke  or  a  strange  odour,  cease  use immediately  and  move  it far away from naked  flames  or  people to avoid a fire or injury from explosion.   Do not charge the battery in a dusty or damp environment and keep the cable away from heated objects.   The battery is not fully charged when leaving the factory. Therefore, you  should  charge  the  battery  for  two  hours  before  use.  Before charging,  make  sure  the  charge  plug  is  correctly  inserted  in  the power socket. If it is incorrectly  inserted, electric shock might  occur and the phone or battery may catch fire or explode. When charging
  10is completed, pull out the charger plug from the power socket, and do not pull the cable.               If  the  liquid  in  the  battery  splashes  into  your  eyes,  do  not  rub  the eyes  to  avoid  damaging  your  vision,  rinse  the  eyes  immediately  in clean water and go to a hospital for assistance. Do  not  place  heavy  objects  on  the  charger  cable.  Do  not  damage, twist or pull the cable to avoid causing electric shock or fire.     When the battery cannot be installed correctly in the phone, do not press down on it heavily to prevent it from leaking or exploding. Do not remove the battery when the phone is on.   If  the  battery  is  distorted,  has  changed  colour  or  is  unusually  hot when charging or when it is stored, remove immediately the battery and  stop  using  it  or  it  may  leak,  become  overheated,  explode  or catch fire.   If a battery is not used for a long period of time after charging, store it at room temperature Do  not  touch  the  power  socket,  power  cable  or  charger  with  wet hands to avoid electric shock. If  water or  other  liquid  enters  the  charger, immediately disconnect the  charger  plug  from  the  power  socket  to  prevent  it  from overheating, catching a fire or malfunction.    Explanation:  The  instructions  in  this  user  manual  apply  to  English mode.  In  other  language  operating  modes,  slight  differences  may appear.  Warning: The manufacturer disclaims any liability for damage, which may result as a consequence  of  improper use of this mobile phone or use contrary to the instructions contained in this manual.  Disclaimer • Specifications  and  functions  of  your  mobile  phone  can  be differ to  those contained  in  this  user  manual  due  the user manual  is  only  contain  general overview.
  11• Specifications  and  functions  of  your  mobile  phone  have been confirmed to work properly since  produced from the factory.  If  there  is  damage  or  defect  due  to  the manufacturing and not by usage, it would follow terms and condition in the warranty card. • If  the  functions  of  your  mobile  phone  related  to  features and services by carrier then those functions will follow the terms & conditions applicable by the carrier. • Please note that  your mobile  phone  still  has  its  limitations referring  to  the  specifications  and  functions.  These limitations cannot consider as damage or defect and cannot be  regarded  as  manufacturer  damage.  Please  use  your mobile  phone  in  accordance  with  the  purposes  and functions.   This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is subject  to  the  following  two  conditions:  (1)  This  device  may  not cause  harmful  interference,  and  (2)  this  device  must  accept  any interference  received,  including  interference  that  may  cause undesired operation.  Changes or modifications not expressly approved by the party   responsible for compliance could void the user's authority to operate the   equipment.  This equipment has been tested and found to comply with the limits for   a Class B digital device, pursuant to part 15 of the FCC Rules. These   limits are designed to provide reasonable protection against harmful   interference in a residential installation. This equipment generates
  12uses and can radiate radio frequency energy and, if not installed and   used  in  accordance  with  the  instructions,  may  cause  harmful interference   to  radio  communications.  However,  there  is  no  guarantee  that interference   will  not  occur  in  a  particular  installation.  If  this  equipment  does cause   harmful interference to radio or television reception, which can be   determined  by  turning  the  equipment  off  and  on,  the  user  is encouraged   to try to correct the interference by one or more of the following   measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the  equipment  into  an  outlet  on  a  circuit  different from that   to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.   Body worn operation The device complies with RF specifications when used near your ear or at a distance of 1 cm from your body. Ensure that the device accessories,  such  as  a  device  case  and  device  holster,  are  not composed of metal components. Keep the device away from your body to meet the distance requirement.  Certification information (SAR) This device  is  also designed to meet the requirements for exposure to radio waves  established  by  the  Federal  Communications  Commission
  13(USA). The  SAR  limit  adopted  by  the  USA  is  1.6  W/kg  averaged  over  one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using at the ear is Measured SAR value 0.52W/kg, and when properly worn on the body is Measured SAR value 1.482W/kg.

Navigation menu