Haier US Appliance Solutions 10WBR30 Smart Light Bulb User Manual B30
GE Appliance & Lighting Smart Light Bulb B30
Users Manual
GE
Li
nk
Connected LED bulb
1LED bulb BR30
10w/60w replacement
Soft white
Indoor light bulb
Dimmable via the app
Control your lighting from anywhere
•
Remotely operate individuallights or groups
•
Automate lighting to fit your schedule
•
Sync with other smart products
•
Dim or highlight for the perfect setting
+
WINK APP SEAL
+
App Store/Google Play logos
so
they know both versions are available
*Zigbee-compatlble hub required to connect
Li
ghtlng facts
Per bulb
Brightness 650 lumens
Estimated yearly energy cost $1.20
Based on 3 hrs/day ，11Ø/kWh.
Cost depends on rates and use.
Li
fe 10 years
Based on 3 hours/day
Li
ght appearance
Warm
←
(2700K)
→
Cool
Distributed by Quirky ，Inc.
606 W.28th St.
New York
，
NY 10001
Made in China.
TWIST IN，TURN ON
1.
Install your GE Link light bulbs
2.
Plug the Link hub or other Zigbee-compatible hub into an AC outlet (sold separately)
3.
Download and launch the Wink app on your mobile device
4.
Follow the instructions on the Wink app to connect and control your lighting
NEED HELP?
Call GE customer service at 1-800-XXX-
" Based on 3 hours use per day
时
Compares one 14 watt LED (1100 lumens) which provides nearly the same light output as one 75 watt
incandescent (1170 lumens). Electricity cost savings based on using the bulb for 15
，
000 hr rates life at 11
Ø
per kilowatt hour compared t
o twenty 75watt in
candescent bulbs (rated life 750 hrs)
BALANCE OF WARRANTY :
Li
mited WarranW : Guaranteed to last 5 years based on rated life at 3 hours per day
at 120V. If this bulb does not last for 5 years (based on 3 hours per day
17
days per
week) return bulb
，
proof of purchase and your name and address to GE Lighting
Product Service Dept
，
1975 Noble Road
，
Cleveland Ohio 44112 . GE will replace
your bulb. BULB REPLACEMENT IS GE'S SOLE WARRANTY OB
Ll
GATION
，
AND
INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED . Some states do not
allow the exclusion or limited incidental or consequential damages
，
so the above
exclusion may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which vary from location to location.
Minimum starting temperature -20
o
C.
IC Caution.
RSS-Gen Issue 3 December 2010"&"CNR-Gen 3e éditionDécembre 2010:
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference that
may cause undesired operation of the device.
- French:
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le
brouillageest susceptible d'encompromettre le fonctionnement.
FCC Caution.
§ 15.19 Label requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.