Haier US Appliance Solutions 12WA19 Smart Light Bulb User Manual 222222222
GE Appliance & Lighting Smart Light Bulb 222222222
Users Manual
GE
Li
nk
Connected LED bulb
1 LED bulb A19
12w/60w replacement
Soft white
Indoor light bulb
Dimmable via the app
Control your lighting from anywhere
•
Remotely operate individuallights or groups
•
Automate lighting to fit your schedule
•
Sync with other smart products
•
Dim or highlight for the perfect setting
+ WINK APP SEAL
+
App Store/Google Play logos so they know both versions are available
.Z
igbee-compatible hub required lo connecl
Lighling facts
Per bulb
Brightness 800 lumens
Estimated yearly energy cost $1.45
Based on 3 hrs/day ，11Ø/kWh.
Cost depends on rates and use.
Li
fe 10 years
Based on 3 hours/day
Li
ght appearance
Warm
←
(2700K)
→
Cool
Distributed by Quirky
，
Inc.
606
W.
28th S
t.
New York ，NY 10001
Made in China.
TWIST IN
，
TURN ON
1.
Install your GE Link light bulbs
2.
Plug the Link hub or other Zigbee-compatible hub into an AC outlet (sold separately)
3.
Download and launch the Wink app on your mobile device
4.
Follow the instructions on the Wink app to connect and control your lighting
NEED HELP?
Call GE customer servlce at 1-800-XXX-XXXX
Based on 3 hours use per day
** Compares one 14 watt LED (1100 lumens) which provides nearly the same light output as one 75 watt
incandescent (1170 lumens) . Electricity cost savings based on using the bulb for 15
，
000 hr rates life at
11rþ per kilowatt hour compared to twenty 75 watt incandescent bulbs (rated life 750 hrs)
BALANCE OF WARRANTY :
Limited Warranty
:
Guaranteed to last 5 years based on rated life at 3 hours per day
at 120V. If this bulb does not last for 5 years (based on 3 hours per day 17 days
per
week) return bulb，proof of purchase and your name and address to GE Lighting
，
Product Service Dept，1975 Noble Road，Cleveland Ohio 44112. GE will replace
your bulb. BULB REPLACEMENT IS GE'S SOLE WARRANTY OB
Ll
GATION
，
AND
INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED. Some states do not
allow the exclusion or limited incidental or consequential damages
，
so the above
excluslon may not apply to you. This warranty gives you specific legal rights and you
may also have other
rig
hts which vary from location to location.
Minimum starting temperature -20
o
C
IC Caution.
RSS-Gen Issue 3 December 2010"&"CNR-Gen 3e éditionDécembre 2010:
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
- French:
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le
brouillageest susceptible d'encompromettre le fonctionnement.
FCC Caution.
§ 15.19 Label requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.