Haier US Appliance Solutions BLEB001 BB2707-25 Bluetooth Dual Mode Module User Manual Revised

Download:
Mirror Download [FCC.gov]
Document ID	3500397
Application ID	jDNvuN78WgVGiVFMbbKupA==
Document Description	Users Manual Revised
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.46kB (580739 bits)
Date Submitted	2017-08-08 00:00:00
Date Available	2017-08-09 00:00:00
Creation Date	2017-06-27 15:16:30
Producing Software	福昕PDF打印机 版本 8.3.0.0331
Document Lastmod	2017-08-08 17:14:46
Document Title	Users Manual Revised

Our Focus, Your Legend
BB2707-25 EDR/BLE Module
Bluetooth Module Datasheet
Version: V2.0
Part Number: BB2707-25
Hardware version: Ver1.3
Iton Technology Corp .
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
Disclaimer and Copyright Notice
Information in this document, including URL references, is subject to
change without notice.
This Document is provided “AS IS” with no warranties whatsoever,
including any warranty of merchantability, noninfringement, fitness for any
particular purpose ,or any warranty otherwise arising out of any proposal,
specification or sample. All liability, including liability for infringement of
any proprietary rights, relating to use of information in this document is
disclaimed. No licenses express or implied, by estoppel or otherwise, to any
intellectual property rights are granted herein.
The Bluetooth word symbol and logo for all Bluetooth SIC,Inc company.
All trade names, trademarks and registered trademarks mentioned in this
document are property of their respective owners, and are hereby
acknowledged.
C 2015 ITON Technology Corp. All rights reserved.
Copyright ○
Iton Technology Corp .
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
CATALOG
1.Overview.......................................................................................................... 4
1.1 Applications.............................................................................................4
1.2 Features................................................................................................... 5
1.3 Functional Block Diagram......................................................................6
1.4 Physical Description............................................................................... 6
2.Supporting Document.................................................................................... 11
2.1 Reference Schematic.............................................................................11
2.2 Layout Considerations.......................................................................... 11
2.3 Electrical Characteristics...................................................................... 12
2.4 RF Specification....................................................................................14
3.Mechanical Specification...............................................................................16
4. Packing Information......................................................................................16
5.Revision History.............................................................................................17
Iton Technology Corp .
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
1.Overview
The BB2070-25 module is using the Broadcom® BCM20707
solution.Bluetooth 4.2-compliant, stand-alone baseband processor with an
integrated 2.4 GHz transceiver. Manufactured using the industry's most
advanced 40nm CMOS low-power process, the BCM20707 employs the
highest level of integration to eliminate all critical external components,
thereby minimizing the device's footprint and the costs associated with
implementing Bluetooth solutions.
The module includes Flash, crystal, and PCB antenna(When SMT,RS1 is
NC,and LC5 、LC6 、 LC7 is welding on PCB) or optional external antenna
connection(When SMT,RS1 is welding on PCB,and LC5 、 LC6 、 LC7 is
NC),the PCB antenna is default.
1.1 Applications
• Home automation
• Point-of-sale input devices
• Blood pressure monitors
• “Find me” devices
• Heart rate monitors
• Proximity sensors
• Thermometers
• Wearables
Iton Technology Corp .
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
1.2 Features
• Complies with Bluetooth Core Specification version 4.2 including
BR/EDR/BLE
• Broadcom proprietary LE data rate up to 2 Mbps
• BLE HID profile version 1.00 compliant
• Bluetooth Device ID profile version 1.3 compliant
• Supports Generic Access Profile (GAP)
• Supports Adaptive Frequency Hopping (AFH)
• Excellent receiver sensitivity
• Programmable output power control
• Integrated ARM Cortex-M3 microprocessor core
• On-chip power-on reset (POR)
• Support for EEPROM and serial flash interfaces
• Integrated low dropout regulators (LDO)
• On-chip software controlled PMU
• PCM/I2 S Interface
• Infrared modulator
• IR learning
• On-chip support for SPI (master/slave modes)
• Broadcom Serial Communications interface (compatible with NXP I2C
slaves)
Iton Technology Corp .
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
1.3 Functional Block Diagram
1.4 Physical Description
The BB2707-25 is a 12.5mm×20mm TG170 PCB with 25 pads located
around the perimeter.
Table 1 shows the pinout diagram of the module.
Pin
Signal
Pin
Signal
Pin
Signal
Pin
Signal
ANT2
GND
OTP_Sel
Up_RTS_N
Up_CTS_N
Up_TXD
Up_RXD
LED1
LED2
10
GND
11
RST_N
12
MFI_RST
13
SELASH_SI
14
SELASH_SC
15
SWITCH
16
SCL
17
SDA
18
LED_STATUS
19
TXD
20
RXD
21
GPIO_1
22
GPIO_2
23
GPIO_3
24
VCC
25
GND
Iton Technology Corp .
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
Table 1 Pin Location
Figure 2: Module PCB Top View
Table 2 Pin Function Descriptions
Pin
No.
Pin name
I/O
ANT2
I/O
Power
domain
VDD_RF
GND
OTP_Sel
N/A
VDDO
Up_RTS_N
Up_CTS_N
Up_TXD
Up_RXD
LED1
VDDO
VDDO
VDDO
VDDO
VDDO
I/O
VDDO
I/O
VDDO
VDDO
I/O
VDDO
LED2
Iton Technology Corp .
Descriptions
RF I/O antenna port, Note:It is active by select
RS1 ,and LC5,LC6,LC7 is NC when SMT
Ground
• If OTP is used, pull this pin high.
• If OTP is not used, pull this pin low.
UART request to send output
UART clear to send input
UART transmit data
UART receive data
BT_GPIO_1/BT_HOST_WAKE A signal from the
BCM20707 device to the host indicating that the
Bluetooth device requires attention.
GPIO: P25
SPI_1: MISO (master and slave)
Peripheral UART: puart_rx
GPIO: P32
A/D converter input 7
Quadrature: QDX0
SPI_1: SPI_CS (slave only)
Auxiliary clock output: ACLK0
Peripheral UART: puart_tx
BT_GPIO_0/BT_DEV_WAKE A signal from the
host to the BCM20707 that the host requires
attention.
GPIO: P36
A/D converter input 3
Quadrature: QDZ0
www.sziton.com
Our Focus, Your Legend
10
11
12
13
14
15
16
GND
RST_N
MFI_RST
SELASH_SI
SELASH_SCK
SWITCH
SCL
I/O
VDDO
I/O
N/A
VDDO
VDDO
VDDO
I/O
VDDO
I/O
I/O
I/O
I/O
VDDO
VDDO
VDDO
VDDO
I/O
VDDO
I/O
VDDO
I/O
VDDO
I/O
VDDO
Iton Technology Corp .
BB2707-25 EDR/BLE Module
SPI_1: SPI_CLK (master and slave)
Auxiliary Clock Output: ACLK0
External T/R switch control: ~tx_pd
GPIO: P38
A/D converter input 1
SPI_1: MOSI (master and slave)
IR_TX
Ground
Active-low reset input
Used for shared-clock application.
GPIO:P4
Quadrature: QDY0
Peripheral UART: puart_rx
SPI_1: MOSI (master and slave)
IR_TX
GPIO: P24
SPI_1: SPI_CLK (master and slave)
Peripheral UART: puart_tx
SPI2_MOSI_I2C_SDA
SPI2_CLK
PCM sync/I2S word select
GPIO: P0
A/D converter input 29
Peripheral UART: puart_tx
SPI_1: MOSI (master and slave)
IR_RX
60Hz_main
Note: Not available during TM1 = 1.
GPIO: P34
A/D converter input 5
Quadrature: QDY0
Peripheral UART: puart_rx
External T/R switch control: tx_pd
PCM/I2S data output.
I2C_SCL
GPIO: P3
Quadrature: QDX1
Peripheral UART: puart_cts
SPI_1: SPI_CLK (master and slave)
GPIO: P29
Optical control output: QOC3
A/D converter input 10
LED2
Current: 16 mA sink
www.sziton.com
Our Focus, Your Legend
17
18
19
20
SDA
LED_STATUS
TXD
RXD
I/O
VDDO
I/O
VDDO
I/O
VDDO
I/O
I/O
VDDO
VDDO
I/O
VDDO
I/O
VDDO
I/O
VDDO
I/O
VDDO
I/O
N/A
VDDO
I/O
I/O
VDDO
VDDO
I/O
VDDO
Iton Technology Corp .
BB2707-25 EDR/BLE Module
GPIO: P35
A/D converter input 4
Quadrature: QDY1
Peripheral UART: puart_cts
BSC: SDA
PCM/I2S data input.
I2C_SDA
GPIO: P12
A/D converter input 23
PCM/I2S clock Fp1
GPIO: P2
Quadrature: QDX0
Peripheral UART: puart_rx
SPI_1: SPI_CS (slave only)
SPI_1: MOSI (master only)
GPIO: P28
Optical control output: QOC2
A/D converter input 11
LED1
Current: 16 mA sink
GPIO: P37
A/D converter input 2
Quadrature: QDZ1
SPI_1: MISO (slave only)
Auxiliary clock output: ACLK1
BSC: SCL
General-purpose I/O4: can also be configured as a
GCI pin.
GPIO: P6
Quadrature: QDZ0
Peripheral UART: puart_rts
SPI_1: SPI_CS (slave only)
60Hz_main
External LPO input
GPIO: P31
A/D converter input 8
Peripheral UART: puart_tx
General-purpose I/O3
GPIO: P27
SPI_1: MOSI (master and slave)
Optical control output: QOC1
Triac control 2
Current: 16 mA sink
GPIO: P33
www.sziton.com
Our Focus, Your Legend
21
22
23
24
25
GPIO_1
GPIO_2
GPIO_3
VCC
GND
I/O
VDDO
I/O
VDDO
I/O
VDDO
I/O
VDDO
I/O
VDDO
I/O
VDDO
I/O
VDDO
N/A
N/A
Iton Technology Corp .
BB2707-25 EDR/BLE Module
A/D converter input 6
Quadrature: QDX1
SPI_1: MOSI (slave only)
Auxiliary clock output: ACLK1
Peripheral UART: puart_rx
General-purpose I/O7: can also be configured as a
GCI pin.
GPIO: P30
A/D converter input 9
Peripheral UART: puart_rts
General-purpose I/O6: can also be configured as a
GCI pin.
GPIO: P11
Keyboard scan output (column): KSO3
A/D converter input 24
GPIO: P26
SPI_1: SPI_CS (slave only)
Optical control output: QOC0
Triac control 1
Current: 16 mA sink
General-purpose I/O5: can also be configured as a
GCI pin.
Debug UART
GPIO: P15
A/D converter input 20
IR_RX
60Hz_main
VCC
Ground
10
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
2.Supporting Document
2.1 Reference Schematic
The most recent schematic , bill of material ,and layout file are available
from the ITON Technology Limit. Contact your ITON representative for
details.
2.2 Layout Considerations
The BB2707-25 module is placed at the location where the antenna is away
from the power supply(i.e.,BT1 Battery contacts)and any digital signal
traces.. The antenna keep-out area which is 5mm around the parameter of the
module region is shown in the red dotted box. PCB material and signal traces
should not be placed within the antenna keep-out area to assure optimum
antenna performance.
Iton Technology Corp .
11
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
2.3 Electrical Characteristics
Table 3: Maximum Electrical Rating
Table 4:Power Supply Specification
Iton Technology Corp .
12
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
Table 5:Power Supply Current(Class1)
Table 6:Power Supply Current(Class2)
Iton Technology Corp .
13
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
2.4 RF Specification
Table 7 : Receiver RF Specifications
Iton Technology Corp .
14
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
Table7: Transmitter RF Specifications
Iton Technology Corp .
15
www.sziton.com
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
3.Mechanical Specification
Weight : 0.85g
Uint : mm
Figure 7: BB2707-25 Module PCB size
4.Packing
Information
TBD
Iton Technology Corp .
16
www.sziton.com
Please be noticed following information and instructions should
be placed in the end-user’s operating manual
1. Separate approval is required for all other operating configurations, including portable
configurations with respect to 2.1093 and different antenna configurations.
2. The MODEL BB2707-25 and its antenna must not be co-located or operating in conjunction
with any other transmitter or antenna within a host device.
This equipment complies with
FCC RF radiation exposure limits set forth for an uncontrolled environment.
3. A label must be affixed to the outside of the end product into which the MODEL BB2707-25
module is incorporated, with a statement similar to the following: For MODEL BB2707-25:
This device contains FCC ID: ZKJ-BLEB001.
4. The module shall be in non-detachable construction protection into the finished products, so
that the end-user has to destroy the module while remove or install it.
5. This module is to be installed only in fixed applications. According to FCC part 2.1093(b)
definition of portable devices is:.
Portable device:
For purposes of this section, a portable device is defined as a transmitting device designed to be
used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the
user.
6. Separate approval is required for all other operating configurations, including portable
configurations with respect to FCC Part 2.1093 and different antenna configurations.
7. A certified modular has the option to use a permanently affixed label, or an electronic label. For
a permanently affixed label, the module must be labelled with an FCC ID: ZKJ-BLEB001. The
OEM manual must provide clear instructions explaining to the OEM the labelling requirements,
options and OEM user manual instructions that are required
For a host using a this FCC certified modular with a standard fixed label, if (1) the module’s FCC
ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not
have straightforward commonly used methods for access to remove the module so that the FCC
ID of the module is visible; then an additional permanent label referring to the enclosed module:
“Contains Transmitter Module FCC ID: ZKJ-BLEB001” or “Contains FCC
ID: ZKJ-BLEB001” must be used. The host OEM user manual must also contain clear
instructions on how end users can find and/or access the module and the FCC ID.
8.
Host product is required to comply with all applicable FCC equipment authorizations
regulations, requirements and equipment functions not associated with the transmitter module
portion. compliance must be demonstrated to regulations for other transmitter components within
the host product; to requirements for unintentional radiators (Part 15B). To ensure compliance
with all non-transmitter functions the host manufacturer is responsible for ensuring compliance
with the module(s) installed and fully operational. If a host was previously authorized as an
unintentional radiator under the Declaration of Conformity procedure without a transmitter
certified module and a module is added, the host manufacturer is responsible for ensuring that the
after the module is installed and operational the host continues to be compliant with the Part 15B
unintentional radiator requirements. Since this may depend on the details of how the module is
integrated with the host, we suggest the host device to recertify part 15B to ensure complete
compliance with FCC requirement: Part 2 Subpart J Equipment Authorization Procedures ,
KDB784748 D01 v07, and KDB 997198 about importation of radio frequency devices into the
United States.
FCC Certification Requirement:
The end product with an embedded - MODEL BB2707-25 may also need to pass the
FCC Part 15 unintentional emission testing requirements and be properly authorized
per FCC Part 15.
Note: If this module is intended for use in a portable device, you are responsible
for separate approval to satisfy the SAR requirements of FCC Part 2.1093.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications made to this equipment not expressly approved by
Haier US Appliance Solutions, Inc. may void the FCC authorization to operate this
equipment.
Our Focus, Your Legend
BB2707-25 EDR/BLE Module
5.Revision History
Change NO.
Date
Subject And Reason
Version
Responser
12-NOV-2016
Initial Version
V1.0
LZX
28-NOV-2016
Exchange the Pin16 and Pin17
V1.1
LZX
2-June-2017
Add the information about the
Hardware version,customer
Software
Ver2.0
LZX
Iton Technology Corp .
17
www.sziton.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : 
Create Date                     : 2017:06:27 15:16:30+08:00
Modify Date                     : 2017:08:08 17:14:46+08:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : 
Description                     : 
Title                           : 
Creator Tool                    : 
Metadata Date                   : 2017:08:08 17:14:46+08:00
Keywords                        : 
Producer                        : 福昕PDF打印机 版本 8.3.0.0331
Document ID                     : uuid:f6993539-56e5-4807-9aa3-9a75e8c6d1d2
Instance ID                     : uuid:fa5917f5-6c64-4f47-9c44-ce8b9ba69155
Page Count                      : 20

EXIF Metadata provided by EXIF.tools