Haier Automatic Drum Washing Machine Hw701286 Users Manual
HW701286 to the manual 834abb0e-5070-4c28-9e0c-f7f3c73caaaf
2015-01-23
: Haier Haier-Haier-Automatic-Drum-Washing-Machine-Hw701286-Users-Manual-260637 haier-haier-automatic-drum-washing-machine-hw701286-users-manual-260637 haier pdf
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Automatic Drum Washing Machine USER MANUAL HW70-I1286 HW80-I1486 Heavy Wash Temp. Rinse Speed Spin Strong wash Auto Delay Pre-wash Soak Silk Delicate Sport wash Wool Silent Synthetic Quick Memory Spin Cotton Start / Pause Press and hold 2seconds to set door unlocked Self-clean Power 03 - 09 Table of contents Before use 10 - 15 using the appliance >COMPONENTS................................ 03 >Preparation................................. 04 >Safety instructions. .................. 05 >Installation. ............................... 06 >Control Panel............................. 08 16- 20 maintenance >Program selection. .................... 10 >Display codes.............................. 18 >Consumption and technical data... 11 >Troubleshooting........................ 19 >Washing methods....................... 12 >Wiring circuit..............................20 >Cleaning & care.......................... 16 legend Yes No Optional For your safety, any instructions in this manual with this "Warning" sign must be followed strictly. Before use COMPONENTS 03 Thanks for purchasing a Haier product Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance. If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and safety warnings. Accessories Check the accessories and literature in accordance with this list: 1x Drain hose bracket 1x Inlet hose assembly AUTOMATIC DRUM WASHING MACHINE 64&3."/6")8# )8# )8# )8# 1x User manual 4x Blanking plugs Heavy Wash Temp. Rinse Speed Spin Strong wash Auto Delay Pre-wash Soak Silk Delicate Sport wash Wool Silent Synthetic Quick Memory Spin Cotton Power Self-clean Start / Pause Press and hold 2seconds to set door unlocked WARRANTY CARD (Customer’s Copy) www.haier-mal.com 1x Warranty card (THIS PORTION TO BE COMPLETED BY OWNER) PRODUCT: MODEL: No: SERIAL NO: CUSTOMER’S NAME (IN BLOCK) MR / MRS / MISS CUSTOMER’S ADDRESS (IN BLOCK) TEL: (H) (O) DEALER’S NAME & ADDRESS (CHOP) DATE OF PURCHASE DATE MTH YEAR HAIER ELECTRICAL APPLIANCES (MALAYSIA) SDN. BHD. (594702-A) No: 1, Jalan Industri PBP 3, Perindustrian Pusat Bandar Puchong, 47100 Puchong, Selangor. Tel : 603-5882 2888 Fax : 603-5882 4003 603-5882 4377 (Service) 603-5882 4462 (Sales) Branches PENANG No. 38, Grd Floor, Jln Perusahaan Jelutong 2 Georgetown, 11600 Pulau Pinang. Tel : 604-288 8500/8501 Fax : 604-288 8502 JOHOR BAHRU No. 58, Grd Floor, Jln Rosmarah 2/17, Tmn Johor Jaya, 81100 Johor Bahru, Johor. Tel : 607-353 5669 Service: 607-353 5680 Fax : 607-353 5787 KUANTAN No. 122, 1st Floor, Jln Haji Ahmad, 25300 Kuantan, Pahang Darul Makmur. Tel : 609 - 514 6166 Fax : 609 - 514 5166 IPOH No. 21, Jln Medan Ipoh 10, Bandar Baru Medan, 31400 Ipoh. Tel : 605 - 547 7897 Fax : 605 - 547 4739 REMINDER :- This Service Warranty is valuable. Preserved it carefully so that you can present it to your Authorized Haier Distributor HAIER ELECTRICAL APPLIANCES (MALAYSIA) SDN. BHD. whenever you have occasion to request the warranty service authorized herein 04 Before use Preparation Preparing The machine Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon opening the package, water drops may be seen on the plastic bag and the porthole. This is normal phenomenon resulting from water tests in the factory. Description This diagram may be slightly different from the layout of the washing machine you have just purchased due to technical improvements. Drain hose Control panel Power Work top Washer door Door handle Detergent distribution drawer Water inlet valve Power cord Back cover screws Back cover Filter cover Transportation bolts Heavy Delicate Wash Temp. Silk Wool Silent Rinse Speed Synthetic Quick Memory Spin Spin Strong wash Auto Delay Pre-wash Soak Cotton Sport wash Power Self-clean Start / Pause Press and hold 2seconds to set door unlocked T3 T4 S1 S4 S2 T2 T1 S3 Before use Safety instructions 05 Before switching the appliance on for the first time DO ... ... Make sure that the transport bolt are removed. ... Use a separate earthed socket for the power supply. ... Make sure that the plug is accessible. ... Hold the plug and not the electric cable when unplugging the power supply. ... Make sure that the fuses in the power circuit are rated for 15A. ... Keep away from heat sources and direct sun light to prevent plastic and rubber components from aging. ... Make sure that the power cord is not caught under or in the appliance and avoid damage to the power cable. ... Check that hose joints and connections are firm and no water can leak. If joints are loose or there is leakage, turn off the water supply and refix. Do not use the washing machine until the hoses are properly fixed. DO NOT ... ... Touch or use the appliance when barefoot or with wet or damp hands or feet. ... Use flammable detergent or dry cleaning agent. ... Use any flammable sprays in close vicinity to the appliance. ... Remove or insert the plug in the presence of flammable gas. ... Allow children or infirm persons to play with the appliance or packing materials. ... Install the appliance outdoors in a damp place, or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak allow the machine to dry naturally. ... Place the washing machine directly on a carpet, or close to a wall or furniture. During Daily use of the appliance DO ... ... Pull up zips and fix loose threads to prevent the items from being entangled. If necessary, put small items into a net bag or pillow. ... Turn off the machine after each wash program and switch it off at the mains to save electricity and for safety. Wipe clean the lower part of the porthole. ... Keep the door slightly open when the washing machine is not in use to prevent formation of odours. ... Let the power cord be replaced by the manufacturer, his service agent or other accordingly qualified persons, in case it is damaged. ... Ensure that the appliance is not used by persons with reduced physical, sensory or mental capabilities, lack of experience and knowledge without supervision or instruction by a person responsible for their safety. ... Supervise children to ensure that they do not play with the appliance. DO NOT ... ... Touch the washer door during the washing process - it gets hot! ...Place heavy objects or sources of heat or damp on top of the appliance. ... Hot wash foam rubber or sponge-like materials. ... Open the detergent distribution drawer during the wash cycle. ... Force the washer door open. The door is fitted with a self-lock device and will open shortly after the washing procedure is ended. ... Open the washer door if the water level is visibly over the porthole. ... Cover the washing machine with plastic cover so that inside dampness cannot be kept in. 06 Installation Before use Dismantle the Transportation bolts The transportation bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process. 1. Remove the back cover. 2. Remove the four bolts on the rear side and take out the synthetic stabilisers from within the machine. 3. Replace the back cover. 4. Fill the holes left by the bolts with blanking plugs. Note: 1.When you replace the back cover,the convexity must face to outside, and you have to insert the back cover from the two gaps as shown in fig.5. 2.Keep the transportation bolts and synthetic stabilisers in a safe place for later use. Adjusting the washing machine 1. 2. 3. 4. 5. There are adjustable feet under the bottom of the washing machine. Before use, they should be adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also reduce wear and tear. We recommend using a spirit level to level the appliance.The floor should be as stable and flat as possible. 07 Before use Inlet Hose 1. Connect the nut on the inlet hose to the connector on the water valve. 2. Apply inlet hose to a water tap with cold, fresh water. Note: Use the hose-set supplied with the appliance. Old hose-sets should not be reused. 1. 2. 1. Use the drain hose bracket to keep the end of the drain hose retained and prevent the outflow of water. Don't extend the length of the drain hose; if an extended hose is required, please consult a serviceman. 8 0 - 1 0 0cm Drain hose 1. 2. The height of the drainage outlet must be 80-100 cm. Fix the drain hose to the clip at the back of the washing machine to prevent it from dropping off. 2. Note: The drain hose should not be submerged in water and should be securely fixed and leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less than 80cm, the washing machine will continuously drain while being filled (self-siphoning). Connecting to the power supply Before connecting to the power supply, check: ¬ The socket is adequate for the maximum power of the washing machine (For safety, fuses in the power circuit should be rated for no less than 15A). ¬ The voltage should meet the requirement. ¬ The power outlet should be capable of accepting the washing machine plug. ¬ Connect the machine to an earthed socket outlet. 08 Control Panel Before use J IHG EDC F A B Heavy Wash Temp. Rinse Speed Spin Auto Strong wash Delay Pre-wash Soak Delicate Silk Sport wash Wool Silent Synthetic Quick Memory Spin Power Self-clean Cotton Start/Pause Press and hold 2seconds to set door unlocked K L M N O Power Switch F B Program knob G Washing time C Auto button H Times of rinse D Spinning Speed Setting button I Spinning time E Washing temperature button J Detergent distribution drawer A Display screen K L M N O Strong washing button Delay Button Pre-wash button Soak button Start/Pause button OPERATIONAL FUNCTIONS A B C ¬ Power Switch ¬ Program knob ¬Auto button D ¬ Spinning Speed Setting Button E ¬ Washing temperature button _ Press this button to switch on the washing machine. Press it again to switch it off.Press On/Off button gently for 2 seconds to switch off the machine as buttons are soft touch sensitive. _By turning the knob clockwise/counterclockwise, the required program can be selected. There are 12 programs available. After a program is selected, the corresponding light will go on. The machine has automatic weighing function. Press the "Power" button to get the power on, then the door will automatically pop open, so put clothes in, close the door, and the display screen will be ready. Press the "Start / Pause" button, about 2 minutes later weighing will be finished and the machine will automatically calculate the best washing process. This can save a lot of water. If you don’t need the automatic weighing, you can press “Auto ” button to switch to the gear of manually selecting the amount of clothing (screen display shows L-1 - L-A). When gear is set up, the washing machine will adjust the water, heating and washing time and so on in accordance with the set gears to save water, time and power. (1) D "L-1"-"L-A" correspond to the amount of clothing in barrel of 1-7, in the manual selection, when the barrel has a lot of clothes (more than one half), please select "L-6 " or "L-A". if the barrel of clothing is relatively few (less than one half), please select one in "L-1", L-2", "L-3", "L-4" and " L-5" (2) Please adjust the dosage of washing powder in accordance with the gears show on screen. _ Press the “Speed” button to select spinning speed. The maximum allowable spinning speed varies with programs. Note: Different water temperatures and spinning speeds can be set for different laundries. Wash using the default settings if there is no special requirement. _ Press the “Temp.” button to select heating temperature (--, 30, 40, 50, 60, 90). The maximum allowable heating temperature varies with programs. Note:“--” in the temperature display indicates non-heated washing. 09 Before use F Display screen G Washing time Press the “Wash” button to set washing time. Press and hold this button to change the time continuously. Click this H I button up until the end. Note: This function is not applicable to “ Spin ” and “ Self-clean ” process Times of rinse Press the “Rinse” button to select the times of rinsing and the maximum allowable times of rinsing is 8. Spinning time Press the “Spin” button to select spinning time. The maximum allowable spinning time varies with programs. J ¬ Detergent distribution drawer _Display washing time, remaining time, times of rinsing, spinning time, temperature setting value, speed setting value, position of clothes weight, child lock state, door lock state, washing progress and alarm message, etc. _Open the drawer, three compartments can be seen: 2 3 Compartment 1: Prewash detergent 1 Compartment 2: Detergent for programs 1 to 10. Compartment 3: Softener, conditioning agent, perfume, etc. K Strong wash- Press "Strong wash" button to increase the washing time and times of rinsing during the main washing stage of ing button selected program.(This feature is applicable for dirty clothes ) The illuminated icon indicates the “strong wash” function is selected. This additional function applies to “cotton”, “memory”, “synthetic” ,“Silent” “heavy”and “Sport wash” programs only. This button is effective before starting a program. Press the “Delay” button and the illuminated icon indicates that the “delay” function is selected. The delay time L ¬Delay Button (0.5-24h) increases by 30 minutes each press of “Delay” button. The time will change continuously if you press and hold this button until you release it. The delay time is the end time of washing. For example, 6:00 means the washing ends after 6 hours (the delay time must be longer than the program’s running time). The “Delay” function is not available for “Spin” and “Self-clean” programs. Note:The delay time must be longer than the program time;otherwise,the washing machine will start the wash program directly. Press the “Pre-wash” button to select or cancel the prewash program. The prewash program can be selected M Pre-wash button for washing heavily soiled clothes. Press the “Prewash” button, the “Pre-wash” icon will illumin ate. Press the “Pre-wash” again, the prewash function will be cancelled and the “Pre-wash” icon will go out. When selecting the prewash function, add a proper amount of detergent into the prewash box, otherwise do not add any detergent into the prewash box. This additional function applies to “cotton”, “memory”, “synthetic” and “Sport wash” programs only. N Soak button Press "Soak" button to startup/shutdown the crease-resistant and soak function. When the process runs to the last rinse, the washing machine is not going to drain, clothes will be soaked in water, and the soak icon flashes, the remain time not decreasing. If you need to dry the clothes, you can press "Soak" button or “start /pause”button, then the icon will be off to cancel this function, and the washing machine continue to work. This feature and the "Delay"button can not be chose at the same time. Also this feature is only effective in the “cotton”, “memory”, “synthetic”,“heavy” , “Delicate”, “Sport wash”, “Silent” process. _ Press the “Start/pause” button, the washer will start and the indicator light remains on. If this button is pressed O ¬ Start/ Pause Button when the washer is in operation, the washer will pause and the indicator light will flash. When power is on, but you do not press "Start / Pause" button to start the washing machine, if it meets door open condition,please press the button for 2 seconds and the door will be open. 2 1 10 using the APPLIANCE Program selection PROGRAM MODES 2 2 1 Detergent compartment for prewash mode 3 2 2 Detergent compartment 1 3 Compartment for softener and other additives 1 Program Temperature Maximum Preset 1 ¬ Cotton - - to 90 °C 2 ¬ Memory 3 Preset spin speed Recommended Laundry HW70-I1286/HW80-I1486 30°C Cotton fabrics 800 rpm - - to 90 °C 30°C Cotton or synthetic 800 rpm ¬ Synthetic - - to 60 °C 30°C Cotton fabrics 800 rpm 4 ¬ Wool - - to 40 °C ----- Woolen fabrics 600 rpm 5 ¬ Silk - - to 40 °C ----- Silk 400 rpm 6 ¬Heavy - - to 60 °C 40°C Heavy soiling 800 rpm 7 ¬ Delicate - - to 90 °C 60°C Underwear 800 rpm 8 ¬ Sport wash - - to 90 °C 30°C Sports wear 800 rpm 9 ¬ Silent - - to 90 °C 30°C Cotton or synthetic 600 rpm 10 ¬ Quick - - to 40 °C ----- 800 rpm 11 ¬ Spin ----- ----- Slight-soil cotton, linen and synthetic fabrics Cotton or synthetic None 800 rpm 12 ¬ Self-clean 90°C Yes No 2 90°C Optional 3 1 1000 rpm 11 using the APPLIANCE Consumption and technical data CONSUMPTION TABLE The wash cycle times are intended as a guide only. The actual time used may vary due to different water pressure, initial water temperature, etc. PROGRAM MAX. LOAD HW70-I1286/HW80-I1486 Temperature WASHING TIME ¬ Cotton 7kg/8kg 30°C 1:32 h ¬ Memory 7kg/8kg 30°C 1:32 h ¬ Synthetic 3kg/3kg 30°C 1:00 h ¬ Wool 1kg/1kg ----- 0:44 h ¬ Silk 1kg/1kg ----- 0:42 h ¬Heavy 7kg/8 kg 40°C 2:12 h ¬ Delicate 3kg/3kg 60°C 1:39 h ¬ Sport wash 7kg/8 kg 30°C 1:32 h ¬ Silent 7kg/8 kg 30°C 1:32 h ¬ Quick 3kg/3kg ----- 0:26 h ¬ Spin 7kg/8 kg ----- 0:09 h 0 kg 90°C 1:00h ¬ Self-clean *) EN 60456 test program / Energy label program with Standard 60°C and max. spin speed and Intense function. TECHNICAL DATA HW70-I1286/HW80-I1486 Power source Max. working current (A) Water pressure (MPa) Nominal load (kg) Spinning speed (r/min) Washing programs Max power (W) Dimensions (HxDxW mm) Net weight (kg) 220 - 240V~/50Hz 10 0.03≤P ≤1 7/8 1200/1400 12 2000 850 x 650 x 595 75 12 Washing methods PLEASE NOTE using the APPLIANCE This washing machine is for domestic use only. If the machine is use for commercial purpose the guarantee will not be valid anymore.Do not use it for purposes other than that for which it was designed. Follow the instructions given on the label of each garment and wash only machine-washable garments. Power supply Connect the washing machine to the power supply (220V to 240V~/50Hz). Water connection Turn on the tap. The water must be clean and clear. Note: Before use, check for leakage in the joints between the tap and the inlet hose by turning on the tap. Preparing the laundry ¬ Sort out clothes according to fabric (cotton, synthetics, wool or silk) and to how dirty they are. ¬ Separate white clothes from coloured ones. Wash them first by hand to check if they fade or run. ¬ Empty pockets (keys, coins, etc.) and remove the harder decorative objects (e.g. brooches). Attention: Small parts (like buttons, etc) may lead to repair work which user has to pay by themselves and can cause damage in the machine. ¬ Garments without hems, underwear, finely woven textile such as fine curtains are to be put into wash bag (it is better not to wash them in a washing machine). ¬ Close zippers and hooks, make sure the buttons are sewn on tightly and place small items such as socks, belts, bras, etc. in the wash bag. ¬ Unfold large pieces of fabric such as bed sheets, bedspreads, etc. ¬ Turn shirts inside out. 13 using the APPLIANCE Loading the machine Heavy Wash Temp. Rinse Auto Delay Pre-wash Soak Delicate Silk Speed Spin Strong wash Sport wash Wool Silent Synthetic Quick Memory Spin Power Self-clean Cotton Start / Pause HW80-I1486 Press and hold 2seconds to set door unlocked Open the washer door, put in the laundry piece by piece. Close the door tightly. ¬ When first using the washing machine, let it run unloaded for one program to prevent the laundry from being tainted by oil or dirty water from the washing machine. Before washing you should run the machine without laundry, but with detergent, with 60°C programm. ¬ Do not overload the washing machine. Selecting detergent The washing efficiency and the performance is determined by the quality of detergent used. Special non-foaming detergent produces good washing results. Use specific detergents for synthetic and woollen goods. Do not use dry cleaning agents such as trichloroethylene and similar products. Note: Do not add more detergent than needed; otherwise, it may cause the situations as following and washing machine malfunction impacting washing machine’s life. 1.Due to the increasing foam, the rinse time will be longer than normal; 2.The foam may overflow from the detergent drawer because of the increasing pressure of the foam; 3.It may remain foam without cleaning out after the final spinning cycle. Recommendation: 1.Clean the detergent drawer once a week. 2.When using the prewashing program, please add half of the rating dosage. 3.Please follow the dosage recommendation on the powder or liquid detergent package. Adding detergent Slide out the detergent drawer and put the required detergent and softening agent into the corresponding compartments. Push back the drawer gently. (Refer to the instructions on the drawer) 2 3 2 1 Caution: 1 ¬ For prewashing program, detergent should be added to both compartments 1 and 2. For other programs, do not add detergent to compartment 1. ¬ Use liquid detergent according to the instructions on its package. Do not use liquid detergent if the prewash mode or "Start delay" is selected. ¬ Do not overuse softener; otherwise, it will damage the artificial fibers. Selecting Program To get the best washing results, an appropriate washing program should be selected according to the laundry type. Please turn the program knob to select the right program. Selecting functional Select the required options. (Refer to the "Control panel" pages 08 and 09) Heavy Delicate Wash Temp. Silk Wool Silent Rinse Speed Synthetic Quick Memory Spin Spin Strong wash Auto Delay Pre-wash Soak Cotton Start / Pause Press and hold 2seconds to set door unlocked Sport wash Self-clean Power 14 using the APPLIANCE Setting washing temperature Heavy Wash Temp. Silk Rinse Speed Synthetic Wool Press and hold down the temperature button until the desired temperature is selected . Setting spin speed Press and hold down the speed button until the desired speed is selected.See "Operational functions" on the "Control panel" pages (08 and 09) for selecting temperature and spin speed. It is advisable to select the recommended value. Washing Press the Start/Pause button. The washing machine will operate according to the preset programs. The washing machine will stop operation automatically when a washing cycle ends. The "End" sign will appear on the display. Open the washer door and take out the laundry. Spin Strong wash Memory Auto Delay Pre-wash Cotton Start / Pause Soak Press and hold 2seconds to set door unlocked Heavy Wash Temp. Silk Rinse Speed Synthetic Wool Spin Strong wash Memory Auto Delay Pre-wash Cotton Start / Pause Soak Press and hold 2seconds to set door unlocked Heavy Wash Temp. Silk Rinse Speed Synthetic Wool Spin Strong wash Memory Auto Delay Pre-wash Cotton Start / Pause Soak Press and hold 2seconds to set door unlocked Heavy Wash Temp. Rinse After washing Turn off the water supply and unplug the power cord. Open the washer door to prevent formation of moisture and odours. Let the door open while not used. Tips for saving energy 1. Collect clothes for one full wash load. 2. Avoid overloading the washing machine. 3. Prewash only heavily soiled clothes. 4. Reduce the amount of detergent or choose standard or delicate wash programs for slightly soiled clothes. 5. Choose a proper washing temperature. Modern detergents can wash with very good result already in lower temperature than 60°C. Only use higher temperature than 60°C for heavily soiled laundry. 6. Follow the dosage recommendation on the detergent package to avoid using too much detergent. Speed Spin Strong wash Auto Delay Pre-wash Soak Silk Delicate Sport wash Wool Silent Synthetic Quick Memory Spin Cotton Power Self-clean Start / Pause Press and hold 2seconds to set door unlocked HW80-I1486 15 using the APPLIANCE Care chart Resistant material Bleachable in cold water Don't dry clean Delicate fabric Do not bleach Dry flat Washable at 95 °C Iron at 200 °C Hung to dry Washable at 60 °C Iron at 150 °C Dry on clothes hanger Washable at 40 °C Iron at 100 °C Tumble dry, normal heat Washable at 30 °C Don't iron Tumble dry, reduced heat Hand wash Dry cleaning with any solvent Don't tumble dry Dry clean only Dry cleaning with pericloride Wool Seal Dry cleaning with aviation fuel LOAD REFERENCE Bed sheet (single) Cotton Approximately 800g Blanket Wool Approximately 3000g Blended fabric clothes / Approximately 800g Jackets Cotton Approximately 800g Jeans / Approximately 800g Overalls Cotton Approximately 950g Ladies Pyjamas / Approximately 200g Shirts / Approximately 300g Socks Blended fabrics Approximately 50g T-Shirts Cotton Approximately 300g Underwear Blended fabrics Approximately 70g 16 Cleaning & care maintenance After washing Turn off the water supply and pull out electricity plug after each wash. Open the washer door to prevent formation of moisture and odours. If the washing machine is left idle for a long period, drain the water in the machine and replace the drain hose. 1. 2. Cleaning the detergent drawer 1. Clean the detergent distribution drawer regularly. Swing out the drawer, flush it clean with water and then replace it. 2. Cleaning the machine Unplug the machine during cleaning and maintenance. Use a soft cloth dampened with soap liquid to clean the machine case and rubber components. Do not use organic chemicals or corrosive solvents. Cleaning the filter Clean the filter once a month: 1. Open the bottom cover. 2.Remove the filter by turning counterclockwise. 3.Flush the filter clean with running water. 4.Replace the filter by turning clockwise and remount the cover. 1. 2. 3. 4. Caution: 1.The filter must be in place, or it may lead to leakage. 2.Place a container under the drain pump filter, to collect any excess water that may come out of the drain pump when the filter is removed. 17 maintenance Water inlet VALVE and inlet VALVE filter To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve filter regularly. Moving the machine If the machine is to be moved to a distant location, replace the transportation bolts removed before installation to prevent damage as shown below. 1. 2. 3. 4. 5. Remove the back cover. Remove the blanking plugs. Insert the synthetic stabilisers and the transportation bolts. Tighten the bolts with a spanner. Replace the back cover. 1. 2. 3. 4. Long periods of disuse If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water supply. Open the washer door to prevent formation of moisture and odours. Let the door open while not used. Heavy Wash Temp. Rinse Speed Spin Strong wash Auto Delay Pre-wash Soak Silk Delicate Sport wash Wool Silent Synthetic Quick Memory Spin Cotton Power Self-clean Start / Pause Press and hold 2seconds to set door unlocked HW80-I1486 18 Display codes maintenance DISPLAY CODES AND SPECIAL FUNCTIONS CODES CAUSES SOLUTIONS Err1 Err2 ¬ Door is not properly shut. ¬ Drainage error, water not emptied within 6 minutes. ¬ Temperature sensor not properly connected or damaged. ¬ Heater error (Appears at the end of a cycle). ¬Water level not met in 8 minutes. _ Shut the door properly. _ Clean the filter and check the drain hose for blockage. If error still exists, please contact the maintenance personnel. _ Contact the maintenance personnel. Err3 Err4 Err5 ¬The height of the drain hose is below 80 cm. _ Contact the maintenance personnel. _ Make sure that tap is turned on, and water pressure is normal. If problem still exists, please contact the maintenance personnel. _ Install drain hose within 80-100 cm of height. _ Make sure the drain hose is not in water. Err7 Err8 End 1:25 ¬ The drain hose is in water. ¬ Motor error. ¬ Water exceeds protective level. ¬ End of wash cycle. ¬The remaining time is 1 hour 25 minutes. 19:30 ¬Status information:Preset time for delayed operation. UNb After the last rinsing cycle finishes,spinning fails completely due to unbalance of the laundry. _ Contact the maintenance personnel. _ Contact the maintenance personnel. ¬ Control panel lock function: Press the "Delay" and the "Start/Pause" buttons simultaneously for 3 seconds after starting a program. It can no longer be changed by operating buttons or knobs. To unlock press the "Delay" and "Start/Pause" buttons again for 3 seconds. ¬ Power-off memory function: In case of abrupt power failure or the need to cut off the power during a program cycle, the present settings will be saved and the preset operation will resume when the power is on again. ¬ To cancel a program Press the "Start/Pause" button, then switch off the power and the program is automatically cancelled. Turn the program selector again to choose another program. Note: During the spin process, if too much foam is inspected, in order to protect the motor, the washing machine will eliminate the foam automatically; the motor will stop and the drain pump will drain the water continuously for 90 seconds. If it happens more than 3 times, the motor will stop until the end of cycle without spinning. ¬ AMT Technology of anti-bacteria and mildew-proof with window pad. Troubleshooting maintenance 19 TROUBLESHOOTING The following circumstances do not constitute problems. Do not contact the Service Center until the problem has been confirmed. PROBLEM CAUSES SOLUTIONS Washing machine fails to operate. ¬ Poor connection to the power supply. ¬ Power failure. ¬ The washer door is not properly closed. ¬ Machine has not been switched on. _ _ _ _ Check connection to the power supply. Check the power supply. Close the washer door properly. Make sure the machine is switched on. Washing machine cannot be ¬ The "Start/Pause" button is not pressed. filled with water. ¬ Water tap is not turned on. ¬ Water pressure is less than 0,03 Mpa. ¬ The inlet hose is kinked. ¬ Water supply failure. ¬ The program knob is not properly set. ¬ The washer door is not properly closed. ¬ The inlet hose filter is blocked. _ _ _ _ _ _ _ _ press the "Start/Pause" button. Turn on the water tap. Check water pressure. Check the inlet hose. Ensure the water supply. Set the program knob properly. Close the washer door properly. Unblock the inlet hose filter. Machine is draining while being filled. ¬ The height of the drain hose is below 80 cm. ¬ The drain hose is in water. _ Install drain hose within 80-100 cm of height. _ Make sure the drain hose is not in water. Drainage failure. ¬ Drain hose is blocked. ¬ Drain hose end is higher than 100 cm above the floor level. ¬ The filter is blocked. _ Unblock the drain hose. _ Make sure the drain hose end is lower than 100 cm above floor level. _ Unblock the filter. Strong vibration while spinning. ¬ Not all transportation bolts have been removed. ¬ Washing machine is located on an uneven surface or is not level. ¬ Machine load is over Max load. _ Remove all transportation bolts. _ Make sure the washing machine is on an even surface and levelled. _ Reduce amount of laundry in the drum. Operation stops before completing wash cycle. ¬ Water or electricity failure. _ Check the power supply. Operation stops for a period of time. ¬ Washing machine gives an error message. ¬ Washing machine is in soaking cycle? _ Check display codes. _ Press the rinse hood button or the Start/pause button again to cancel it. Excessive foam in the ¬ The detergent is not a low-foaming type or for drum, which is spilled to the manual wash. distribution drawer. ¬ Excessive use of detergent. _ Check if your detergent is appropriate. _ Reduce amount of detergent in the distribution drawer. Automatic adjustment of the ¬ The washing program duration will be adjusted _ This is normal and doesn't affect the washing time. functionality. Spinning fails ¬ Unbalance of the laundry _ Add clothes or run a spinning program again. 20 WIRING CIRCUIT WIRING CIRCUIT Waterlevel temperature sensor sensor X1- 1 X1- 2 X1- 3 X1- 4 X1- 8 X1- 7 X1- 6 X1- 5 heating wire R FA3 N L RTF G display board RX/TX X6- 3 X8- 4 X8- 3 X8- 2 X8- 1 X5- 3 X7- 4 X4- 1 FA FA1 12V INT GND X4- 3 MRL driving board MRN door lock MRC J101- 1 J101- 2 inductor X7- 3 J301- 1 X6- 2 J301- 2 X7- 1 J301- 3 X1- 5 X1- 4 X1- 3 X2- 3 EVF EVFX X2 - 4 EVP EVPX X5 - 1 BI BIX L' FA:Anti-jamming suppresser BIX：drain motor EVPX：prewash Water inlet valve EVFX： mainwash Water inlet valve frequency conversion motor
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:17:08 Instance ID : uuid:0b201508-ee8f-48c9-a8b5-ceef69e316c8 Document ID : adobe:docid:indd:431f9aaf-2759-11e0-9d72-b5e79fbc6409 Rendition Class : proof:pdf Derived From Instance ID : 180634da-25fa-11e0-8a12-9868cf108728 Derived From Document ID : adobe:docid:indd:0b6626ba-8659-11de-b8a6-c251f0dd1556 Create Date : 2011:02:21 19:03:46+08:00 Modify Date : 2011:02:24 10:30:15+08:00 Metadata Date : 2011:02:24 10:30:15+08:00 Creator Tool : Adobe Illustrator CS3 Thumbnail Width : 180 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9025 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 148.000161 Max Page Size H : 210.000145 Max Page Size Unit : Millimeters Font Name : FuturaStd-CondensedBold, ArialMT, Arial-BoldMT, NSimSun Font Family : Futura Std, Arial, Arial, 新宋体 Font Face : Bold Condensed, Regular, Bold, Regular Font Type : Open Type, Open Type, Open Type, TrueType Font Version : OTF 1.029;PS 001.003;Core 1.0.33;makeotf.lib1.4.1585, Version 3.00, Version 3.00, Version 3.03 Font Composite : False, False, False, False Font File Name : FuturaStd-CondensedBold.otf, ARIAL.TTF, ARIALBD.TTF, simsun.ttc Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 20 Creator : Adobe Illustrator CS3EXIF Metadata provided by EXIF.tools