Haier L32A9 Ak Users Manual AK脫垄脦脛脣碌脙梅脢茅 688脪拢驴脴脝梅6321A

L32A9-AKF to the manual 03530164-6241-48d9-bcf4-504c1a2ec126

2015-01-23

: Haier Haier-L32A9-Ak-Users-Manual-260447 haier-l32a9-ak-users-manual-260447 haier pdf

Open the PDF directly: View PDF PDF.
Page Count: 53

Please read this manual carefully
before operating the unit, and keep
it for future reference.
TFT-LCD COLOUR TELEVISION RECEIVER
OWNER'S MANUAL
This User's Manual is applicable for the following models:
+
L32A9-AK,L32A9-AK,L32A9 -AK,L32A9-AKF
Congratulations on your purchase, and welcome to the family !
Dear Haier product owner:
Thank you for your confidence in Haier. You`ve selected one of the
best-built, best-backed products available today. We`ll do everything
in our power to keep you happy with your purchase for many years to
come.
As a member of the Haier family, you`re entitled to protection by
one of the most comprehensive warranties and outstanding service
networks in the industry.
thanks for investing in a Haier product.
""
""
CONTENT
BEFORE OPERATING
Warning.................................................................................................................1
Important Safety Instructions................................................................................2
Buttons and interface location............................................................................. 4
Remote controller.................................................................................................6
Remote controller key function.............................................................................7
Effective range of remote controller......................................................................8
External equipment connections..........................................................................9
BASIC OPERATING
Switching on/off the TV set................................................................................ 14
Select input modes ........................................................................................... 15
Searching channel............................................................................................ 16
Watching TV program........................................................................................18
Picture control functions.................................................................................. .21
Sound control functions.....................................................................................23
Time functions....................................................................................................26
Function menu...................................................................................................28
Adjust menu.......................................................................................................29
Lock setup.........................................................................................................32
OTHERS
Others functions................................................................................................35
Stream media broadcast system.......................................................................37
Specifications and functions..............................................................................47
......................................................................................................48
Troubleshooting.................................................................................................49
Maintenance
WARNING
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
*A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided,
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical specifications
must be followed if it is to be replaced.
Warning:
To avoid fire or electric hazards, never place your television receiver in an area
with heavy moisture. Attention should be paid to avoid accidental scratches or
impacts onto the LCD screen.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Caution:
Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
To achieve the best performance of your television, read this User's Manual
carefully and properly store it for future reference.
Information of screen displays and figures in the User's Manual may vary due
to technical innovations.
Caution:
Unauthorized disassembly of this product is prohibited.
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
1
Important Safety Instructions
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Do not locate the product close to water
or oil, which may cause fire hazards.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially
Thunderstorm.
Do not use damaged or worn electric plugs
and keep electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or share the same socket by multiple plugs
to avoid fire hazards.
The product must be placed on a solid and
stable surface to avoid collapse.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact
authorized after-sales
service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.
2
Front panel Control
Buttons and functions
- This is a simplified representation of front panel.
- Here shown may be somewhat different from your TV.
Buttons and interface location
4
- CH + - VOL + TV/AV MENU POWER
1 CH-/+ :
2 VOL-/+ :
3 TV/AV: :TV-VIDEO-SIDE VIDEO-S VIDEO-YUV-
USB-VGA-DVI
4 MENU:
5
6 POWER : AC power on/off
7
8 Multi-media input
program minus and plus , menu options
volume decrease and increase , menu reset and entry
all input source select
menu display
Power on/off and indicator: in red when standby mode, in blue when display.
Remote control signal receive window
Buttons and interface location
Rear panel Control
5
VIDEO
L
AUDIO
R
USB Socket
AUDIO Input
connect to hear
stereo sound from an
external device.
VIDEO Input
Connects the video signal
from a video device.
DVI Input
Connect the monitor output
connector from a PC to the
appropriate input port.
Antenna Input
Connect cable or
antenna signals to
the TV, either directly
or through your
cable box.
DVD/DTV Input
(Component )
Connect a component
video/audiodevice to
these jacks.
Audio/Video Input
S-Video Input
Connect audio/video or
S-Video out from an
audio/video or S-Video
device to these jacks.
EXT Subwoofer:
Subwoofer audio output
terminal.
Audio input
for linking DVI or
other appliance audio
frequency output terminals.
Video/Audio output
terminal
Connect ordinary video/audio
or other appliance
audio input terminals.
VGA Input
Connect the monitor
output connector from
a PC to the jack
Audio input
for linking PC or
other appliance audio
frequency output terminals.
Earphone jack
Earphone Audio output
terminal
ANT IN
DVI IN
VGA L-AUDIO-R
IN
S-VIDEO
IN
VIDEO
IN
L-AUDIO-R
OUT
VIDEO
OUT
AUDIOAUDIO
VGA IN
Pr/Cr Pb/Cb Y L-AUDIO-R
IN
POWER WOOFER
Power Cord Socket
This TV operates on AC power.
The voltage is indicated on
the specifications page.
Never attempt to operate the
TV on DC power
Remote controller
Precautions
Battery loading
1.Slide open the cover of the battery compartment on the back of the remote controller.
2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
Make sure that there is no obstacle
between the remote controller and
television set.
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Keep the remote controller away from
heat source or humid area to ensure
effective performance of the remote
controller.
Make sure that two AAA alkaline
batteries are loaded. The batteries must
be of the same type. The batteries must
be located properly. The batteries are not
rechargeable.
6
3
2
1
Remote controller key function
7
The remote controller cannot be operated unless the batteries are
properly loaded.
Note:
The function just takes the remote control for example in this manual
P+/-(CH+/-),V+/-(VOL+/-),MENU,TV/AV and POWER on TV panel are corresponding
with the CH+/-,VOL+/-,MENU,TV/AV and POWER keys.
DISPLAY
POWER
MUTE STILL
I/II
PIC.SIZE
TV/AV
S-VIDEO
DVD/DTV
PC/DVI
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM
12 3
456
78 9
-/-- 0
ZOOM/MOVE
USB
PIP SWAP SCAN
CH.EDIT
SHUTTLE
SLEEP
H.LOCK
TIME SKIP
ZOOM
RETURN
SSM
HELPENTER
The cover of the multi-media keys
press down to the appropriate position
1.DISPLAY: Display the current info
2. POWER: Press to turn on the TV from standby
mode. Press again to switch off the TV to standby
mode.
3.STILL: Press it to freeze-frame the current screen
press again to continue playing(never see the still
picture for long time, it would burn-in the screen)
4. / : Nicam selection in the signal No available)
5. MUTE: Press this button to mute the sound.
Press again to reactivate the sound. Sound also
reactivated if the power is turned off then on or
if press VOL+ button.
6. PIC.SIZE: Press to select the display the size of
the screen(never see the 4:3 picture for long time,
it would burn-in the screen)
7. S-VIDEO: Press it to select S terminal input.
8. DVD/DTV: Select YUV input
9. TV/AV : Press this key to select the sources
10. PC/DVI: Press it to select inputs as follows:
TV-VGA-DVI-TV
11. OK: Press to confirm
12. Q.VIEW: Back to the last channel
13. CH+/-: Select the option up and down in menu
or select channels when there is no OSD.
14. MENU: Press to display or exit the menu
15. VOL+/-: Left and right orientation in menu option
or adjust the volume when there is no OSD.
16. PSM: Press to select the picture mode
17. : Press to select the sound mode
18. Number key: Press to select the channel number
19. No available
20. ZOOM/MOVE: PIP moving(No available)
21. PIP: No available
22. SCAN: Scan all preconcerted channel program
23.SWAP: Switch the input signal of the PIP and
the main picture(No available)
24. CH.EDIT: Press to display the stored channel
diagram(No available)
25. SLEEP: Can be used to set time to change
the TV into the standby status after a period of
preset time.
26.H.LOCK button
27.SHUTTLE button
28.Time skip button
29. Only for the multi-media ,reference to
the instruction following.
SSM
DISPLAY
POWER
MUTE STILL
I/II
PIC.SIZE
TV/AV
S-VIDEO
DVD/DTV
PC/DVI
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM
12 3
456
78 9
-/-- 0
ZOOM/MOVE
USB
PIP SWAP SCAN
CH.EDIT
SHUTTLE
SLEEP
H.LOCK
TIME.SKIP
ZOOM
RETURN
SSM
HELPENTER
8
above
below
20
20
left right
front 8m
45 45
Ensure the remote controller is pointed toward the remote controller
windows on the display.
No obstacles should be placed between the remote controller and the
remote controller window.
The effective receiving scope for the signal is 8 meters to the front of
00
the remote controller windows, and 45 to the left or right side and 20
above or below the control windows.
Use of remote controller:
1. To ensure a normal operation, the remote controller should not be
dropped or damaged in any way .
It should also be kept dry and away from all heat sources.
2. Battery replacement is necessary when the remote controller acts
inconsistently or stops operating the display.
Effective range of remote controller
Effective range
ANT IN
External Equipment Connections
Note
* It is recommended that you'd better use 75
* Don't bind antenna cable and electric wire together.
coaxial cable to remove the
disturbance caused by airwave.
outdoor
antenna
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
(additional purchase)
Antenna input
75 standard
coaxial type
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
To improve picture quality in a poor signal area, purchase
and install a signal amplifier.
If the antenna needs to be split for two Tv`s, install a 2-
WaySignal Splitter in the connections.
If the antenna is not installed properly, contact your dealer
for assistance.
9
ANT IN
DVI-DTV OUTPUT R AUDEO L
RGB-DTV OUTPUT RAUDEO L YPbPr R AUDEO
AUDIO AUDIO
DVI IN
AUDIO
VGA IN
VGA Pr/Cr Pb/Cb Y LR
AUDIO
AUDIO S-VIDEO
Pr/Cr Pb/Cb Y LR VIDEO LR
DVD setup
How to connect
1. Connect the DVD video outputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)
INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on
the TV, as shown in the figure.
2. If your DVD only has an S-Video output
jack, connect this to the S-VIDEO input on
the TV and Connect the DVD audio outputs
to the AV IN jacks on the TV, as shown in the
figure.
NOTE:If your DVD player does not have
component video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the S-Video button on the remote
control to select S-VIDEO mode.
3.Press Play button on external equipment
for program play.
4. Refer to the DVD player's manual for
operating instructions.
External Equipment Connections
DVD
or
DTV setup
-To watch digitally broadcast programs,
purchase and connect a digital set-top box.
How to connect
Use the TV`s COMPONENT (Y, Pb/Cb,
Pr/Cr) INPUT jacks, VGA or DVI port for
video connections, depending on your set-
top box connections available. Then, make
the corresponding audio connections.
How to use
1. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2. Use PC/DVI on the remote control to
select PC or DVI (Y, Pb/Cb, Pr/Cr) mode.
3.Press Play button on external
equipment for program play.
Digital Set-top Box
or or
10
IN IN IN IN
IN
AUDIO
DVI IN
AUDIO
VGA IN
VGA
PC setup
How to connect
1. Use the TV`s VGA IN or DVI (Digital Visual Interface) IN port for video connections, depending on
your PC connector.
If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only
one of either VGA IN or DVI INPUT to display the PC on the TV.
If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either
VGA or DVI; (the other mode is set to Plug and Play automatically by the TV.)
2. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as
required.
How to use
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Use PC/DVI on the remote control to select PC or DVI source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution,
change the refresh rate to another rate or adjust the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic
card or consult the manufacturer of the PC graphic card.
NOTES:
1 Use a DVI cable.
2 Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may
become permanently imprinted on the screen.
3 The synchronization input form for Horizontal and Vertical frequencies is separate.
External Equipment Connections
11
External Equipment Connections
Connect Woofer
1. Take the woofer out, and place it the hind rind. (See picture)
2. Connect cable to the woofer terminal and
LCD TV terminal, and insert the connecting
cable into the terminal slot.
12
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for
operation on AC. Insert the AC cord plug into
a standard polarized AC outlet.
NOTES:
Never connect the AC line cord plug to other
than the specified voltage. Use the attached power
cord only.
If the polarized AC cord does not fit into a non-
polarized AC outlet, do not attempt to file or cut
the blade. It is the user`s responsibility to have
an electrician replace the obsolete outlet.
If you cause a static discharge when touching
the unit and the unit fails to function, simply
unplug the unit from the AC outlet and plug it
back in. The unit should return to normal operation.
Polarized AC Cord Plug.
Polarized AC Cord Plug
AC Outlet
Wider Hole
and Blade
External Equipment Connections
13
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
Connecting Headphones
Note
Prolonged use of headphones at a high volume
may damage your hearing.
You will not receive sound from the speakers
when you connect headphones to the system.
Plug a set of headphones into the 3.5mm
mini-jack socket on the rear panel of the set.
ANT IN
Power ON/OFF
Indicator
Remote receiving
window
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be different from your TV`s because it
is just an example to help you with the TV operation.
Switching ON/OFF the TV set
1 Please press down the power switch to
switch on AC power supply and the power
indicator will light .
2 If the indicator is lighting in red, press
POWER button on the remote control again.
3 If you want to exchange to standing by
status, please press down POWER button on
the remote controller.
4 If you want to fully switch off the power
supply for the TV set, please press down the
power switch button on the TV set.
14
- CH + - VOL + TV/AV MENU POWER
1Press MENU and VOL+/-button to select
the FUN. Menu.
2Press CH+/-button to selectLanguage.
3Select a particular language by pressing
VOL+/- button repeatedly.
You can choose one of two languages.
(Chinese or English)
4When you are satisfied with your choice,
press MENU button to return to normal
viewing.
When you start using your set for the first time,
you must select the language which will be
used for displaying menus and indications.
Choose the Menu Language
Choose the input source
Press TV/AV button on remote
controller, the menu appears
on the screen. Then press
CH+/- to select the TV item,
and press VOL+/- to ensure it.
Source
Select input modes
If you hope to enjoy the picture from the external
input source, before to select the source, you need
to connect the devices, otherwise, when you select
the source, the none or no signal will appears on the
screen.
Before watching TV program, you need to ensure
your TV in TV mode.
TV: the input source from ANT IN terminal output.
AV1 : the input source from AV1 terminal output.
AV2 : the input source from AV2 terminal output.
YPbPr/YCbCr: the input source from YPbPr terminal
output.
VGA:the input source from VGA IN terminal
output.
DVI: the input source from DVI IN terminal
output.
USB: the input source from USB socket terminal
output.
15
TV/AV
S-VIDEO
DVD/DTV
PC/DVI
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
This TV set has three methods to set channels, which are respectively full automatic,
manual search fine tune.
In this section, how to use the remote control to set channel is explained. You can also use
buttons on the TV set to set channel.
Full automatic search mode
Automatic search
1 Press the MENU button and
VOL+/- button, till tuning menu
shown on the right display on
the screen.
Note : the tuning menu will be
in normal TV mode.only operated
2 Press the CH+/- buttons to
select "Auto Search" item.
3 Press the VOL+ button to
ensure automatic search
function work.
After the s arch has finished, ae ll channels now playing
program will be automatically preset in order.
Searching Channel
16
Color Sys. Auto
Sound Sys. D/K
Manual Search
Store Program ---
Fine Tune 49.75MHz
Skip Off
Auto Search
Prog. Switch
B
C
A
VHF-L 188.16
4 Press MENU button to stop automatic search function.
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Manual search
Manual search
1 Press the CH+/- buttons or the
PROGRAM NUMBER 0-9
button to choose desired
channels regard channel 1 as
example
2 Press the MENU button and
VOL+/- button, till the TUN.
menu shown on the right display
on the screen.
3buttons to
select " Manual Search" item.
Press the CH+/-
4 Press the VOL-/+ buttons to
start searching.
17
Color Sys. Auto
Sound Sys. D/K
Manual Search
Store Program ---
Fine Tune 49.75MHz
Skip Off
Auto Search
Prog. Switch
B
C
A
Searching Channel
Fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless reception
is poor.
2Press VOL-/+ buttons repeatedly
to carry out fine tune, till the best
picture and sound are obtained,
then loosen the button.
Color Sys. Auto
Sound Sys. D/K
Manual Search
Store Program ---
Fine Tune 49.75MHz
Skip Off
Auto Search
Prog. Switch
B
C
A
When searching successfully for the channel, the Manual search
stopping automatically, at this time, press CH- button to select
Store Program, then press VOL+/- to set the store.
1 Repeat step 1-2, then press CH+/- buttons to select
" Fine Tune" item.
VHF-L 188.16
12 3
456
78 9
0
3
AUTO
D/K
12 3
456
78 9
0
TV/AV
S-VIDEO
DVD/DTV
PC/DVI
Watching TV Program
You can watch TV program in a presetting channel.
Watching TV program
How to select the desired program
1 Using "Program number" buttons.
Directly enter the channel number with the numeric keypad
on the remote control.
If to select channel numbers of double-digit or three-figure ,
press continuously the numeric buttons in three second.
2 Using the CH+/- buttons.
Press the CH+ button to select a channel number in number
increasing direction.
Press the CH- button to select a channel number in number
decreasing direction.
How to select the desired sound
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
Volume
To select the TV mode
Before watching TV program, you may ensure your TV in
TV mode.
Press TV/AV button to select TV mode.
18
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
If the color of some channel is abnormal
Usually this should be set in the
auto position. However if the color
displayed on the screen are incorrect,
you can manually select the correct
color system.
Press the menu and VOL+/- button,
till the picture menu shown on the
right will display on the screen.
Press the CH+/- buttons to select "Sound Sys.", then press
the VOL-/+ buttons to select the correct sound system. In
general, you can set it as "D/K".
If sound is abnormal
If picture color is abnormal
Press the CH+/- buttons to select "Color Sys.", then press the
VOL-/+ buttons to select the correct color system. In general,
you can set it as "AUTO".
Watching TV Program continued
Watching TV program
19
Color Sys. Auto
Sound Sys. D/K
Manual Search
Store Program ---
Fine Tune 49.75MHz
Skip Off
Auto Search
Prog. Switch
B
C
A
3. press VOL-/+ button to set Skip On.
4. press MENU to exit.
After the programs are presetting, you can skip some
programs so that to select your favorite channels only.
1. Press CH+/- button or Direct-digit
choosing button to select a channel
directly (take channel 18 for
example).
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number
of the channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set Skip OFF.
Skip
2.Press MENU CH+/-and VOL+/-
button, till theTUN. menu shown
on the right will display on the
screen.
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Color Sys. Auto
Sound Sys. D/K
Manual Search
Store Program ---
Fine Tune 49.75MHz
Skip Off
Auto Search
Prog. Switch
B
C
A
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Watching TV Program continued
Watching TV program
Quick program view
1Suppose the channel number you
used just now is 8 and the channel
number you are using is 18 (as shown
in the figure).
If you want to return to the last
watched program channel 8, you can
simply press the Q.View button.
If you want to return to channel 18,
press the button again. Use this
function, you can easily change
between the channel you are using
and the channel you used last time.
2
3
Color Sys. Auto
Sound Sys. D/K
Manual Search
Store Program ---
Fine Tune 49.75MHz
Skip Off
Auto Search
Prog. Switch
B
C
A
Current Prog. 000
To Prog. 001
Switch
B
C
A
Prog. Switch
1.Press MENU CH+/-and
VOL+/- button, till the TUN.
menu shown on the right will
display on the screen.
2. Press CH-/+ button to select
Prog.Switch.
3. Press VOL+ to enter the
submenu, and press the digital
button to set the desired
channel number,
Press CH+ button to To Prog.
Press the digital button to set
the exchange channel number,
press CH+ button to Switch,
then press VOL+ button to
ensure.
4. press MENU exit.
This function enables quick swap to the last watched program.
20
18
AUTO
D/K
8
AUTO
D/K
18
AUTO
D/K
Multiple picture modes
Picture Control Functions
How to customize your own picture status
Brightness
Contrast
Sharpness
Chroma
Hue(only in NTSC mode)
BackLight
Dark
Weak
Soft
Shallow
More purple
Green
Bright
Strong
Sharp
Deep
More green
Red
ITEM
Press VOL-
Press VOL+
How to select picture modes
You can quickly select the desired picture mode from
three preset modes and one customized mode.
Press the PSM button to select the
desired picture quality. Four kinds
of picture modes (i.e.,
"Soft", "Personal", )
can be selected in turn.
"Normal",
"Bright"
1 Press the MENU button and
VOL+/VOL- button , till the
PIC menu shown on the right
display on the screen.
2 Press the CH+/- buttons to
select the item to be adjusted,
then press the VOL-/+ buttons
to obtain the desired effect.
Picture mode Picture quality
Personal
Soft
Bright
Normal
The 4 modes are
A spare setting that can be adjusted to
personal tastes
Designed for rooms that have good all round
lighting
Designed for night time low light viewing
Designed for rooms with high ambient
lighting such as daytime sport;
Brightness
NOTE these items are adjustable only under the personal setting.
21
Mode Personal
Contrast
Brightness
Chroma
Hue
Sharpness
BackLight
DNR Auto
B
C
A
50
50
50
0
50
50
PIC. Mode
Bright
Normal
Soft
Personal
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
DNR( Digital Noise Reduction)
1 After calling up the
Picture menu, press
CH+/- button to select
item.
"DNR"
2Press VOL+ to enter
the list. Select Auto,
Off
,Weak
according
to the image noise.
, Medium
or Strong
3 Press MENU return
to the picture menu.
Automatically filters out and reduces the image
noise and improves picture quality when receiving
weak video signals.
Mode Personal
Contrast
Brightness
Chroma
Hue
Sharpness
BackLight
DNR Auto
B
C
A
50
50
50
0
50
50
Multiple picture modes
Picture Control Functions
Mode Personal
Contrast
Brightness
Chroma
Hue
Sharpness
BackLight
DNR Auto
B
C
A
50
50
50
0
50
50
In other modes
TV/AV1/AV2/USB
Only N system.
Mode Personal
Contrast
Brightness
Chroma
Hue
Sharpness
BackLight
DNR Auto
B
C
A
50
50
50
0
50
50
YPbPr/YCbCr
No adjustable
Mode Personal
Contrast
Brightness
Chroma
Hue
Sharpness
BackLight
DNR Auto
B
C
A
50
50
50
0
50
50
VGA/DVI
No adjustable
22
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Multiple sound modes
How to choose sound mode
How to customize your own sound quality
Press the SSM button to select the
desired sound quality. Four kinds
of sound modes (i.e.,
Personal ,and
Music ) can be selected in turn.
Standard ,
Theater ,
1 Press MENU button and
VOL+/- button , till the SOU.
menu shown on the right
display on the screen.
2 Press CH+/- buttons to
select the item to be
adjusted, then press VOL-/+
buttons to obtain the desired
effect.
Sound Control Functions
Sound mode Sound quality
Personal
Standard
Music
Theater
A spare setting that can be adjusted to
personal tastes
Designed to reduce the bass and treble which
enhances the voice for news programs
Enables extra bass and treble to enhance the
movie experience;
normal sound with moderate bass and treble
setting
23
Volume 50
Balance 0
SOU. Mode Personal
Treble 50
Bass 70
Surround On
AVC Off
Woofer Off
B
C
A
Treble Increases or decreases the treble.
Bass Increases or decreases the bass.
SOU. Mode
Music
Standard
Theater
Personal
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
This will adjust the output of the right and left speakers to
obtain the best stereo reproduction for your listening
position.
The intermediate value is 0. When indication value of Balance
increases toward+50, sound of the right and left speaker
becomes stronger and weaker, respectively. When indication
value of Balance decreases toward -50, sound of the right
and left speaker becomes weaker and stronger.
Press CH+/- button to Select Balance,
Press VOL+ button to increase the audio output in the right
speaker;
press VOL- button to increase the audio output in the left
speaker.
Sound Control Functions
(Continue)
The surround sound feature expands the audio listening
field wider and deeper to create exceptional sound
quality from the TV`s speakers.
Press CH+/- button to Select Surround,
press VOL+/- button to set Surround as Off or On
surround sound
Balance
Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every time
the channel is changed. This feature lets you automatically
adjust the volume of the desired channel and reduces the
volume differences between channels and programs,
providing a more constant overall level. This will also
reduce the dynamics of sound.
AVC( Auto volume contol)
Woofer is a speaker that complements front speaker`s
reproduction capability of low-pitched sound.
Woofer sound
Press CH+/- button to Select AVC,
press VOL+/- button to set Surround as Off or On
Press CH+/- button to Select Woofer,
press VOL+/- button to set Surround as Off or On
24
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
MUTE
Mute
Mute
When you need to pay attention to surrounded sounds,
or there is a telephone calling you or there are some
guests visiting you, the sound elimination (mute)
function is very convenient.
How to eliminate sound
1 Press the MUTE button on
the remote control and "MUTE"
type face will display on the
lower part of the screen. At this
time, the sound of the TV set
is turned off.
2 If you want to recover the
sound, press the MUTE
button again or directly press
the VOL-/+ buttons.
25
Sound Control Functions
Time Functions
On/off timer
Clock setting
Clock setting and timer on/off functions
1Press button and VOL+/-
button, and the TIME menu display
on the Screen.
MENU
2Press CH+/- buttons select
"Clock",press VOL -/+ buttons to
select hour or minute position, then
press the digital buttons to set the
value of hour or minute;
1Press CH+/- buttons to select
"On time", press VOL-/+buttons
to select hour or minute position;
then press the digital buttons to
set the value of hours or
minutes.
2Press CH+/- buttons to select
"On prog", then press the digital
buttons to select your desired
channel.
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
The clock will only work if the TV set is turned on or
in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the rear panel, the clock loses power and will need
to be reset when the power is reconnected.
26
Clock --:--
Off Time --:--
On Time --:--
On Prog 000
Remind Time --:--
Remind Prog. 000
B
C
A
Clock --:--
Off Time --:--
On Time --:--
On Prog 000
Remind Time --:--
Remind Prog. 000
B
C
A
NOTE:
1.If Clock option is setting,
the time you set for Off Timer
/On Timer will be a point
of time. Otherwise, if Clock
is not set, the time you set for
Off Time/On Time will be a
period of time.
2.Sleep Off/ Off Time can not
be set at simultaneously.
If both of the two are set, the
later setup will be operation.
3Repeat step 1-2 to set Off time .
Indication will appear on the screen 1 minute prior to
expiry of set time.
Suppose Timer Off is set, and indication is as follows:
Off Time
When the above indication appears on the screen,
set time may be changed if VOL+/- button is pressed.
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Time Functions
How to use the remind time and program
Remind Time and Remind Program setting
1 Press
button to call up the TIME
menu on the screen.
MENU and VOL+/-
2 Press CH+/- buttons to
select "Remind Time",
then press VOL -/+ buttons
to select hour or minute
position; then press the
digital to set the value of
hour or minute.(take 19:30
as an example)
3 Press CH+/- buttons to
move the cursor to "Remind
Prog.", then press the digital
buttons to set the desired
channel.
Program remind timer, that displays an on-screen
reminder prompt, when a program on a different
channel is due to start.
27
Clock --:--
Off Time --:--
On Time --:--
On Prog. 000
Remind Time --:--
Remind Prog. 000
B
C
A
Clock --:--
Off Time --:--
On Time --:--
On Prog. 000
Remind Time --:--
Remind Prog. 000
B
C
A
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Language English
Menu Timeout 15seconds
Menu Background Translucent
BlueScreen Off
Calendar
3A Optimize Off
Time Skip 0 Min
B
C
A
Function menu
Menu Timeout
Repeat step 2 and 3 to set the menu out time.
Each Press of VOL+/- button repeatedly to select the number
of preset minutes, the time will be set in sequence: 5seconds,
10seconds, 15seconds, 20seconds, 25seconds, 30seconds,
40seconds.
Menu Background
Repeat step 2 and 3 to select semi transparency and opaque
background of OSD.
BlueScreen
Repeat step 2 and 3 to select BlueScreen.
If you select ON, when no signal, the background is blue; if you
select OFF, when no signal, the background is dark.
3A Optimize
Repeat step 2 and 3 to set the 3A optimizeas on or off.
The 3A optimize tracks picture contrast and color to improve
the quality of picture in terms of brightness and sharpness.
Calendar
Repeat step 2 to select the Calendar, press
VOL+ button to search
the desired year or
month.
Press CH+/CH- button
to adjust the desired
year or month.
Time Skip
Repeat step 2 to select
the Time Skip, Each Press of VOL+/- button repeatedly to
elect the number of preset minutes, the time will be set in
sequence: 0seconds, 1seconds, 2seconds, 3seconds,
4seconds, 5seconds, 6seconds,7seconds, 8seconds,
9seconds,10seconds.
It is possible to select language, OSD transparency, menu timeout, calendar,
3A optimize, time skip.
1.Press MENU and VOL+/-
button to enter the FUN.
Menu.
2.Press CH+/- to select
desired item.
3.Press VOL+/- button to
adjust the values level.
4. Press menu to exit.
Function menu operation
No adjustable in AV/AV2/YPbPr/
YCbCr/VGA/DVI/USB modes
No adjustable in YPbPr/YCbCr/
VGA/DVI/USB modes
28
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Display Mode Normal
Color Temperature Normal
Black Stretch On
Adjust
RGB
Default
Auto Sync.
B
C
A
Adjust menu
1.Press MENU and VOL+/- button to enter the
ADJ. menu.
2.Press CH+/- to select
desired item.
3.Press VOL+/- button to
adjust the values level.
4. Press menu to exit.
Display Mode
You can also press PIC.SIZE button on remote controller
to select the desired picture ratio.
Normal
Choose Normal when you want to view the picture without
any alteration. However, the top and bottom portions of the
picture will be cropped.
Wide Screen
Choose Wide Screen when you want to adjust the picture
horizontally, in a linear proportion to fill the entire screen.
Repeat step 2 and 3 to set the Display Mode.
This will increase or decrease Warm (red) and Cool
(blue) colors to suit personal preferences. Select Cool
to give the white colors a blue tint, Normal to give the
white colors a neutral tint, Warm to give the white
colors a red tint. Green to give the white colors a
green tint.
There are four kinds of modes (i.e., "Normal","Warm" ,
"Green","Cold")can be selected in turn.
Black Stretch-(Automatically Increases the Contrast
Rage)
Color temperature
Repeat step 2 and 3 to set the .Color temperature
Black Stretch
Repeat step 2 and 3 to set the .Black Stretch
29
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
4:3 Mode
Choose 4:3 when you want to view a picture with an original
4:3 aspect ratio, with black bars appearing at both the
left and right sides.
PC setting
Press PV/DVI button to select PC or DVI mode.
PC setting
30
Adjust menu
In VGA and DVI input mode, H-Position and V-Position can be adjusted to
eliminate transverse line interference and decentered picture.
Display Mode Normal
Color Temperature Normal
Black Stretch On
Adjust
RGB
Default
Auto Sync.
B
C
A
Only be adjustable
in the VGA/DVI mode.
1Press MENU button and VOL+/VOL- button , till the ADJ.
Menu display on the screen.
2 Press CH+/- buttons to select the item to be adjusted, then
press VOL+/- buttons to adjust.
Note:
1. As adjusting H position or V
position parameter, It is
natural that the picture will
have faintness once in a while
if the range is more, then to
adjust contrarily to normal
position.
2. H-position,V-position,Auto
Adjust are not available in TV
mode.
3. Auto Adjust is not available
in AV and S-VIDEO mode. H Size Horizontal size of picture can be adjusted in this item.
H Position: Horizontal position of picture can be adjusted in this
item.
V Size: Vertical size of picture can be adjusted in this item.
V Position: Vertical position of picture can be adjusted in this
item.
Fine Tune: Adjust phase to the best effect suiting for VGA signal.
Adjust
Press CH+/- buttons to select
Adjust, then press VOL-/+
buttons to enter the sub menu.
H Size
H Position
V Size
V Position
Fine Tune
B
C
A
0
0
0
0
0
This will adjust the picture of H-positon, V-positon, H-size, V-size
and Fine Tune.
TV/AV
S-VIDEO
DVD/DTV
PC/DVI
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate
transverse line interference.
PC setting
1
2 Press
Press CH+/- buttons to
select RGB, then press VOL-
/+ buttons to enter the sub
menu.
CH+/- buttons to
select the desired item, press
VOL+/- button to adjust.
31
NOTE
As the frequency of display
differ in PC device you may
select the appropriate
frequency to obtain desired
effect. If the signal of receive
is excess, the picture can be
not displayed or wrong on
the screen.
This is opted for adjustment of picture location requency and
phase parameters in VGA mode.(After the operation, complete
will be on the right of the operation)
In VGA , if no signal input, the Auto Sync will be no adjustable.
Sequence frequency H-frequency
KHz Remark
31.5
37.88
48.36
60
60
60
DOS
VESA
VESA
Note
V-frequency
Hz
Recommendatory frequency as follow:
(Continue)
Display Mode Normal
Color Temperature Normal
Black Stretch On
Adjust
RGB
Default
Auto Sync.
B
C
A
Red
Green
Blue
B
C
A
0
0
0
RGB is opted for adjustment
of the numerical value of red,
green and blue in VGA/DVI
mode.
Default
Auto Sync
Repeat step 1 and 2 to set the Default.
This is opted for adjustment of parameters to delivery setup
in VGA mode.(After the operation, complete will be on the
right of the operation)
Repeat step 1 and 2 to set the .Auto Sync
Adjust menu
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Press H.LOCK button, Password will appear on the screen.
The initial password of the television is 0000 and security
default password is 9443. then enter Lock Set menu.(as
follow)
Note: If the password is not correctly entered, you will be
required to reenter the password and the cursor will stay at
the first place.
Press EXIT to cancel the window.
Password
Off
Tuning Lock
Preset Prog.
Prog. Num
Source Lock
Child Lock
Max Volume
UnLock
Lock Set
Off
1
Off
100
The password can be changed.
After entering the Lock set menu, Press CH+/- to select
password, Press vol+/-, the screen will display the follow.
If correct password is entered, the screen will display the
follow.
Press digital button to set the new desired password, and
the screen will display the follow.
If the desired password is entered correctly twice, the old
password will be changed. If the desired password is not
correctly entered twice, the screen will display New ----,
then you have to reenter the password.
Lock setup
How to use the password function
Note:
If Clear Lock is activated,
the password setup
cannot be changed.
To set new Password
Old Pw. ----
New Pw. ----
Confirm ----
The television has the
function of security
default lock. Password
needs to be entered
when the program
lock mode is to be
set.
SHUTTLE
SLEEP
H.LOCK
TIME.SKIP
12 3
456
78 9
0
32
Prog. Num
Prog Num is opted for setting up preset channel. Press CH+/-
button to select Prog Num. Press VOL /- button, to select
channel number.(The item is not available except TV signal.)
Source Lock
Source Lock is opted to hinder external input modes, such as
AV, Scart and VGA. Press CH+/- button to select the option,
and press VOL+/- button to display Source Lock menu as
follows:
AV1
Off
SAV1
AV2
YPbPr/YCbCr
VGA
Source Lock
Off
Off
Off
Off
Press CH+/- button to select desired option. Press VOL+/-
button to set up the mode of Source Lock. If some Source
Lock is set ON, the mode will be entered and the screen will
display blue background with the mute mode activated and
Lock. In lock on mode, when screen is blank, icon Lock will
be always displayed on the screen. If lock mode is to be
verified, enter Source Lock submenu and set relative mode
off, or select Clear Lock in the Lock Set Menu.
Preset Prog.
Prog Set is opted for setting up start channel. Press CH+/-
button to select Prog Set. Press VOL /- button, sources can be
swapped in TV/AV1/SAV1/AV2/YPbPr/VGA/DVI/USB/Off mode.
After setup, the set mode will be entered if the television is
switched off and on again. To set Off, the television will memory
the off-channel.
Tuning Lock
Press CH+/- to select Tuner Lock and VOL+/- to set On/
Off. (To set On, some operation such as search will be
not available. When enter the TUN. menu, Tuner Lock will be on
the screen, and the time will be the same with the main menu if
no operation. If you want to operate TUN. menu, you need to
enter the Lock menu to set Tuner Lock Off or operate Clear Lock.
Lock setup
SHUTTLE
SLEEP
H.LOCK
TIME.SKIP
DVI
USB
Off
Off
33
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Max Volume
Press CH+/- button to select Max Volume. Press
VOL+/- button for adjustment between 0 100. If a
certain value is set, when volume is being adjusted,
the sound value can not exceed maximum volume
value. If current volume is over Max Volume, when
Lock Set menu is set, current volume will become
set maximum volume. If current volume is below
maximum volume, customer set volume will stay
unchanged.
UnLock
Press CH+/- button to select Unlock mode. Press
VOL+/- button to unlock all set modes, setting all
lock options to off, and the maximum volume returns
to 100.
Child Lock
Press CH+/- button to select Child Lock.
Press VOL+/- button to set On or Off mode. If lock on
mode is set, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child
Lock, which can be erased by press of EXIT button.
5 seconds later after the latest press, the screen
display will disappear automatically. The Child Lock
mode can be resumed by entering Lock Set menu,
set Child LockON or OFF.
Lock setup
34
OK
Q.VIEW
CH+
CH-
VOL-
VOL+
MENU
PSM SSM
Others functions
Nicam Sleep display functions
Display function
Press the DISPLAY button, then
the channel number and system
will be displayed on the screen.
Press again,
it is disappear.
the DISPLAY button
DISPLAY
Press the I/II button will result in fast swap of NICAM
function of current program.
NICAM
35
3
AUTO
B/G
Sleep
The TV set will switch automatically to standby at the
preset time with the SLEEP time on. You may set the
sleep time.
each press ofSLEEP button repeatedly on the remote
control to select the number of preset minutes, the timer will
be set in sequence: (0Min, 5Min, 15Min, 30Min,60Min,
90Min, 120Min).
After the sleep time is programmed, the display will appear
briefly every ten minutes to remind you that the sleep timer
is operating.
To confirm the sleep timer setting, pressSLEEP and the
remaining time will be displayed for a few seconds.
To cancel the sleep timer, pressSLEEP repeatedly until the
display turns to0 Min.
SLEEP
Scan
1 If you want to select a desirable program, you may
scan all the TV programs in memory. You can simply
press Scan button to do this. Press scan button once,
there are nice pictures on the screen, press Scan button
again, there are sixteen pictures on the screen to scan.
2 If you want to stop the function during auto tunning,
simply press Scan button again.
SCAN
Store
Shuttle function
Press Shuttle button about 3
second, and the display store
on the screen, at the time, you
may operate other, then if you
scan over program, you may
press again shuttle button to
return to the setting program.
Shuttle function enables quick swap to setting program.
Others functions
Scan Shuttle functions
SHUTTLE
36
Stream media play prepare
Stream media broadcast system
37
1. Supporting equipment
1.Equipment supporting Mass and
Storage agreements include USB,
mobile hard disk, card reader, some
MP3 and digital camera.
2.Equipment supporting PTP
agreement includes some digital
camera.
2. 1 Supporting media:
picture, music, MPEG4, MPEG2
and MPEG1;
Supporting file format
*.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3,
*.WHA, *.JPG and *.JPEG. Due to
particularity of file code and file mode,
It is possible that some files cannot be
read.
2 If Pic & Music mode is activated,
relative media file format will include
JPEG and MP3 files. After Picture is
selected, MP3 files set for play will
open both music and picture files for
sync play performance. As some files
must be read while music is being
played, the speed of picture operation
response might be affected.
3.Before starting operation, verify
USB storage device is of FAT32 and
FAT file system format. At present, this
television does not support NTFS and
the file systems of other format.
4.Many movie files use suffix of AVI and
MPG. However, many kinds of format
are used for internal files. This
television can only play some AVI
and MPG files of this format. Those
files with suffix of dat are not movie
files, but data files used by
computers, and cannot be played for
movies.
5.External card reader supports
most digital cards available in the
market. Readable digital cards are
classified according to the property
of card readers and can be
connected to mobile hard disks
(working voltage 5.0V, working
current not over 500mA).
6. Some time the television operation
may be halted due to excessive rate
of information code errors. In such
case, restart the system. As there are
many nonstandard USB mobile
devices in the market. If this kind of
USB mobile devices are used in the
stream media play system, the
problem of identification failure
might occur. The same problem may
also happen with computers, not
televisions.
7.It is suggested that the external
devices with USB2.0 interface be
used to improve velocity of
information reading and continuity of
information play.
Stream media broadcast system
38
Stream media system setup
Note: Memory cards or USB devices are not
supplied with this TV.
USB setup
1Insert USB in the card slots at the left side the TV.
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter
the stream media system.
CARD setup
SETUP
File Copy
USB2
Remove USB1
Press ENTER key to play this devices
AAA Multimedia Player
1Jack of cardInstructions
Jack of SM card
Jacks of SD MMC MS card
Jack of CFcard
Jack 1
Jack 2
DIGITAL MEMORY CARD
COMPACT FLASH
128
MB
2Insert the card as right direction. As following Card in common use
1 CF card
jack
CARD
MULTIMEDIA
128
MB
2 MMC card
3 MS card
MEMORY STICK
128MB
4 SM card 5 SD card
ID 128MB
SD
128MB
This TV is compatible with the card of SD/MMC/CF/MS/SM
format.
How to use
USB1
jack jack jack jack
Note
1.Please note chooses uses
the digital memory card with
you corresponds the receptacle
2.Card reader in 1 cannot
simultaneously insert two kind
of cards in the graphical
representation position
Note:
1.the card insertion time, after the flows media system starts 2s , insert the card
to numerical code card reader , do not bring card to start flow media system.
2. After card insertion, indicator light will shines, and enters glitters condition,
after period of time , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on play operation and so on .
3, In the market ,the digital card type are very many, please uses standard
product of the standard factory , meets reads takes difficult or reads speed
limits, please replaces the digital card.
Remove USB2
Stream media broadcast system
39
Removing USB device
1
press RETURN button to exit menu.
3 Remove the memory card/USB device.
4 If to remove the card device, pressRETURN
button to return to the main menu, and
remove the card.
Press up or down to select Remove USB,
and press ENTER button to ensure it.
2
Card data protection
- Do not remove the card/USB device when the content is being read or when
browsing. Such action may damage the memory card/USB device.
- Do not touch the terminals on the back of the card.
- Always insert a card in the correct direction. Failure to do so may result in
damage to the card and the unit.
- Do not subject the card to excessive pressure or strong impacts.
- Malfunctions of the unit or card may result in data loss or damage to the card.
- Haier shall not accept any liability for damage or loss of stored data.
Warning:
Memory cards can be swallowed
by young children. Do not allow
children to handle memory cards.
Please remove the memory card
immediately after use.
SETUP
File Copy
USB1
USB2
Remove USB1
Press ENTER key to remove USB1 devices
AAA Multimedia Player
Remove USB2
Stream media broadcast system
40
1. Press up or down to select the item with up or down.
2 Press or to select the desired item of submenu
with left or right.
3 Press ENTER button to ensure the desired option to
enter the submenu to resume the speed of standard.
4. Press or button to operate play quickly or slowly.
5.Press pause button to make the program stop and press
again to resume it.
6.Press ZOOM button to make zoom, and press or
or / button to enjoy the detail.
8 press RETURN button to return to previous menu and
stop play, press RETURN button repeatedly to return to main
menu.
To start the media play
1. Press USB button to enter media play system.
2. Press up or down button
to select the desired option.
3. Press ENTER button to
enter desired option.
4. Press to return the
previous menu.
5. If to exit USB system, you need to return to the main
menu to protection card data.
RETURN Press ENTER key to play this devices
To operate the menu
AAA Multimedia Player
7 Press HELP button to call up or exit the OSD information.
And press HELP button to call up or exit the OSD during
operating file copy.
Note: If there are no operation two minute later, the
TV will enter the saver automatically, at the time, press
any button of USB system to exit the saver menu.
USB
ZOOM
RETURN
HELPENTER
SETUP
File Copy
USB2
Remove USB1
USB1
Remove USB2
To select stream media broadcast system
Stream media broadcast system
41
1. Press up or down
button to select Picture item.
2. Press ENTER button to
enter the menu of play.
3. Press again up or down
button to select desired
enjoy picture, and then
press ENTER button to enter
the play menu.
4. On screen display, Press
or to select the speed
of play.(Normal, Slow, Fast).
5. Press or button to
swap the picture of next and
previous. Press RETURN button
to return.
To play picture
JPEG
0016.JPG
Play
Slideshow speed Slow IMAGE
To enjoy the picture detail
1. After selecting the picture to play, press ZOOM to
select desired zoom.
2. Press HELP button to exit the display, and then
press or or or
to move and enjoy the picture detail.
1.Press up or down button
to select "Card"or "USB".
(The device be inserted
and identified).
2. Press ENTER button to
enter adjusted option.
Picture
Music
Movie
Music and Pic
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
To make the picture overturn
0
Each press of button to make overturn 90 with right,
press ENTER button to resume the program playing.
AAA Multimedia Player
AAA Multimedia Player
AAA Multimedia Player
Note:
the play file menu are
different with your USB
devices.
Press ENTER key to play this devices
USB
ZOOM
RETURN
HELPENTER
SETUP
File Copy
USB2
Remove USB1
USB1
Remove USB2
To enjoy music
Stream media broadcast system
42
1. Press up or down button
to select "Music" option.
2. Press ENTER button to enter
play menu.
3. Press up or down button to
select desired music, and
then press ENTER button to
play music.
Note: The play file menu are
different with your USB device.
4. When playing music,
press up or down to select
play mode, (play mode:
standard, program, Random;
Repeat mode: Disc Repeat,
Folder Repeat, File Repeat)
and press ENTER button to
ensure the mode.
5. When playing music, press
or button to swap the
next and previous music
6. Press RETURN button to exit
the playing.
Note:1. DISC Repeat mode: press up or down button,
the DISC Repeat will appear on
the screen, and then press
ENTER to ensure it.
2. Program mode:
press or button to select
the music in right list, and press
ENTER button to program in turn,
and then press button to
select "Done", and then press ENTER button
to ensure it.
The day went away .MP3
Play mode standard
The day you went away.MP3
01 07 / 04 20
Picture
Music
Movie
Music and Pic
AAA Multimedia Player
AAA Multimedia Player
The day went .MP3
Soft .MP3
Done
The day went .MP3
Soft .MP3
USB
ZOOM
RETURN
HELPENTER
USB
ZOOM
RETURN
HELPENTER
To play Movie
Stream media broadcast system
43
1. Press up or down button to
select "Movie" option.
2. Press ENTER to enter play
menu.
3. Press again up or down
button to select desired
movie, and press again
ENTER button to play it.
4. On screen display, press
or button to select in
turn:
File -PlayBack Control-Audio
channel-Play Mode
5. Press or button
to set speed, press ENTER button
to resume to standard mode.
6. Press or button to
select the next movie or
previous.
7. Press RETURN button repeatedly
to return.
E08-8SOBTILES-1
Picture
Music
Movie
Music and Pic
AAA Multimedia Player
AAA Multimedia Player
USB
ZOOM
RETURN
HELPENTER
USB
ZOOM
RETURN
HELPENTER
To select the Music and PIC item
Stream media broadcast system
44
1. Press up or down button
to select "Music and Pic"
option, and press ENTER
button to enter menu.
2. Press up or down to select
desired file, and press
button to ensure it.
( to cancel). Repeat step
2 to select more file, and
press ENTER button to enter
play menu.
3. On screen display menu,
press up or down to select
the speed to play.( Normal,
Slow, Fast).
4. Press or button
to swap the next and previous
picture, press or
button to select the music.
Note: press pause button to
stop playing the picture.
5. Press repeatedly RETURN button
to return.
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
MP3
The day you went away .MP3
JPEG
0016.JPG
Play
Play mode standard IMAGE
00 01:43
Picture
Music
Movie
Music and Pic
AAA Multimedia Player
AAA Multimedia Player
Note: On the music and picture, the playing music
is *.mp3 format.
USB
ZOOM
RETURN
HELPENTER
USB
ZOOM
RETURN
HELPENTER
Copy file function
Stream media broadcast system
45
1. Press up or down to select
"File Copy" item.
2. Press ENTER button to enter
the copy menu.
3. Press ENTER button to
enter the file menu, and
press up or down button to
select "Card" or "USB"
4. Press ENTER button to enter
Card or USB, and select the
files to copy, then press
HELP button to call up COPY
and PASTE, and then press
/ button to select
COPY, and press ENTER button
to confirm, press again
/ button to select
PASTE, then press
ENTER button to paste, in this
time, the "File already exits,
overwrite it "will appears
on the screen, and press
or button to select
YES/NO, and then press ENTER
button to confirm.
5. Press ENTER to cancel.
USB1
Select source Port:
USB2
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
Root
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
Root
COPY
PASTE
Press ENTER key to enter COPY menu
AAA Multimedia Player
Note:
button to select the
all files;
button to cancel.
SETUP
File Copy
USB1
USB2
Remove USB1
USB
ZOOM
RETURN
HELPENTER
Remove USB2
To select language
1. Repeat steps 1-2, and
then press or to
select version.
2. Press ENTER button to
display the version number.
To display the version
Languages
Version
V2.1.04250
1. Press or to select
"SETUP " item.
2. Press ENTER button to
enter the SETUP menu,
3.and press again ENTER
button to enter language
option.
4. Press or to select
desired language, and
press ENTER to ensure it.
5. Press RETURN button to
return.
Press ENTER button to SETUP menu
AAA Multimedia Player
AAA Multimedia Player
AAA Multimedia Player
SETUP
File Copy
Card
USB
Remove USB
Stream media broadcast system
46
USB
ZOOM
RETURN
HELPENTER
Specifications and functions
Picture proportions 4:3/wide screen: (3 modes)
Panorama picture: 16:9
Picture element:
Multi-input compatibility
Advanced technology for motion picture processing
Two speakers/optional
Complex component: RCA-pin 3
Component video signal: YUV 1
S terminal: Mini DIN 4-pin 1
RGB input: D-sub 15-pin 1 (480i/p, 720p, 1080i, 1080p)
Audio input: RCA-pin TYPE (L/R) 4: full support
separate audio frequency input
Audio system: stereo
1366 768
Size: WxDxH unit:
Working conditions
Power: 150V-240V, 50/60Hz
Power consumption: 140W
Temperature
Working: 5 35 Storage: -10 45
Humidity
Working: 20 80% Storage: 5 90%
1010mmX300mmX605mm
stand and speaker included
47
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Maintenance
Cleaning the Screen
- Early malfunctions can be prevented. Careful and regular cleaning can
extend the amount of time you will have your new TV. Be sure to turn the power
off and unplug the power cord before you begin any cleaning.
1. Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a
mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring
the cloth until it`s almost dry, and then use it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on
your TV.
Cleaning the Cabinet
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good
idea to unplug the power cord to protect against possible damage from lightning or
power surges.
48
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out
the problem by yourself according to the instructions listed hereunder before
contacting the after-sales service for technical assistance.
Note:Production of the screen requires high and precision technologies. However,
there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or
spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where
the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound
might be produced. These phenomena might happen in the area 1,500 meters above the sea
level. This is resulted from difference between air pressures inside and outside the display. This
is not a defect covered by the limited warranty.
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
Note: Do not leave the television with static picture in an extended period as it may
result in residual image on your television screen.
49
Problem Possible remedies
Picture too big or small
One speaker failure
Slight sound from display
Turn on the power supply;
Properly plug the TV set to the power socket;
Check to see if the power cable of other appliance is
plugged in the TV set. Make sure that the power cable
of the TV set is properly connected.
No picture,
no sound
Good picture,
no sound
Depress the volume button;
Check out the audio frequency input signals.
Failure of remote
controller
Check to see if the remote controller display
receiving window are blocked by other objects and
if batteries are properly loaded.
No color, weak
color or poor picture
Designate the item of color from the Picture menu
and depress the volume button;
Keep the display and VCR separate a reasonable space;
Activate some functions to store picture brightness;
Make sure that the display and signal source are
available and turned on.
Excessive brightness
or darkness Adjust brightness or contrast.
Adjust the setup of sizes.
Balance the sound in the menu.
It is a normal phenomenon.
01
0090506321A

Navigation menu