Haier XQG50 11 User Manual To The 242b87a4 959c 4a31 9d39 C21a21d394b0

User Manual: Haier XQG50-11 to the manual

Open the PDF directly: View PDF .
Page Count: 29

What The World Comes Home To

Front Load

Clothes Washer &

Dryer Combo

XQG50-11 WATER

SAVER NO

SPIN ON/OFF

User Manual-

Guide de l’Utilisateur-

Manual del Usuario-

Model #

Modèle

Modelo #

XQG50-11

Lavadora y Secadora

de Carga Frontal

Lave-Linge Sechant a

Chargement Frontal

XQG50-11 Manual 10/29/02 1:51 PM Page 2

IMPORTANT SAFETY INSTRUCTIONS

Warning – To reduce the risk of fire, electric shock, or injury

to persons when using your appliance, follow basic

precautions, including the following:

1. Read all instructions before using the appliance.

2. Use this appliance only for its intended purpose as described in this use and

care guide.

3. Use only detergents or softeners recommended for use in this appliance and

keep them out of the reach of children.

4. This appliance must be properly installed in accordance with the installation

instructions before it is used.

5. Never unplug your appliance by pulling on the power cord. Always grasp the

plug firmly and pull straight out from the outlet.

6. Replace immediately worn power cords, loose plugs/power outlets.

7. Unplug your appliance before cleaning or before making any repairs.

8. If your old appliance is not being used, we recommend that you

remove the door. This will reduce the possibility of danger to children.

9. Do not operate your appliance in the presence of explosive fumes.

10. Do not use this appliance to wash clothes soaked, spotted or washed in

gasoline, dry cleaning solvents or any other explosive or flammable substances

that could ignite and explode.

11. Clothes or rags used to clean flammable or explosive materials should not be

washed in this appliance till all traces of this material has been removed, to

avoid an accident.

12. Do not add or mix any flammable or explosive substances to the wash.

13. Do not try to remove clothes while the tub is moving. Let it come to a complete

stop before use.

14. The appliance loading door must be closed when tub is spinning.

15. Do not operate your appliance when parts are missing or parts are broken.

16. Do not use this appliance for commercial clothes washing.

17. Do not operate this appliance unless all enclosure panels are properly in place.

18. Do not tamper with controls.

19. To reduce risk of injury do not allow children to play in or on the appliance.

Close supervision of children is necessary when the appliance is used

near children.

English

XQG50-11 Manual 10/29/02 1:51 PM Page 3

20. This appliance must be connected to proper electrical outlet with the correct

electrical supply.

21. Proper grounding must be ensured to reduce the risk of shock and fire. DO

NOT CUT OR REMOVE THE GROUNDING PLUG. If you do not have a

three-prong electric receptacle outlet in the wall, have a certified electrician

install the proper receptacle. The wall receptacle MUST be properly grounded.

22. Hydrogen gas may be produced if the water heater has not been used in more

then 2 weeks. This could be explosive and can explode under certain

circumstances. If this is the case, before using this appliance turn on all the hot

faucets and let the hot water run for a few minutes. This will let the trapped

hydrogen escape. During this process do not turn on an electric appliance,

smoke, light a match/lighter or use a flame to avoid an accident, as hydrogen

gas is flammable and can explode.

23. Do not dry articles that have been previously cleaned in, washed in, soaked in,

or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive

substances, as they give off vapors that could ignite or explode.

24. Do not repair or replace any part of the appliance or attempt any servicing

unless specifically recommended in the user-repair instructions that you

understand and have skills to carry out.

25. Do not use heat dry to articles containing foam rubber or similarly textured

rubber-like materials.

26. Clean lint trap before and after each load.

27. Do not place items exposed to cooking oils in your dryer. Items contaminated

with cooking oils may contribute to a chemical reaction that could cause a load

to catch fire.

28. To reduce the risk or electric shock or fire, do not use extension cords or

adapters to connect the unit to electrical power source.

SAVE THESE INSTRUCTIONS

For Future Use

English

XQG50-11 Manual 10/29/02 1:51 PM Page 4

Thank you for purchasing our Haier

product. This easy-to-use manual will

guide you in getting the best use of

your washer & dryer combo unit.

Remember to record the model and

serial number. They are on a label in

back of the unit.

Model number

Serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain

warranty service.

English

DANGER

Risk of child entrapment. Before you throw away your old

appliance, take off the door so that children may

not easily get trapped inside.

XQG50-11 Manual 10/29/02 1:51 PM Page 5

Table Of Contents

PAGE

SAFETY INSTRUCTIONS....................................................................1

OPERATING INSTRUCTIONS............................................................4

Parts and Features..................................................................................5

Operations ............................................................................................7

Normal Operating Sounds....................................................................16

Care and Cleaning Guide ............................................................16

Cleaning and Maintenance ..................................................................16

Moving and Vacationing ......................................................................17

Storage of Your Washer ......................................................................17

Troubleshooting..............................................................................18

INSTALLATION INSTRUCTIONS ....................................................21

Tools and Materials Required................................................................21

Unpacking Your Washer ......................................................................22

Leveling Your Washer ..........................................................................23

Steps for Installation ............................................................................23

Electrical Connections....................................................................26

Grounding Instructions..........................................................................26

Power Interruptions ..............................................................................26

Warranty ........................................................................................27

English

XQG50-11 Manual 10/29/02 1:51 PM Page 6

XQG50-11 WATER

SAVER NO

SPIN ON/OFF

English

1. Wash Cycle Selector Knob

2. Dry Cycle Select Knob

3. Power "On" Indicator Light

4. Power "On/OFF" Button

5. No Spin Selector Button

6. Water Saver Button

7. Detergent/Softener Dispenser

8. See Through Glass

Window Door

9. Front Adjustable Leveling Legs

(Not Shown)

10. Caster Release Levers

11. Button Trap

OPERATING INSTRUCTIONS

Parts and Features

XQG50-11 Manual 10/29/02 1:51 PM Page 7

English

1. Water Inlets (Hot/Cold)

2. Power Cord (115 V / 60 Hz)

3. Drain Hose

4. Rear Adjustable Leveling Legs

5. "U" Clamp

6. Hose Retainer Clips

XQG50-11 Manual 10/29/02 1:51 PM Page 8

Power Button:

•Push the button in to have your washer "ON". The light will turn on

indicating that power is "ON". Push the button out to have your washer

"OFF". The light will go off indicating that power is "OFF".

Spin Cycle Selector Button:

•If you want to extract more water from your clothes during the wash

cycle, leave the button in the out position. Clothes will be drier when this

option is selected.

•If you do not want to extract water from your clothes using the spin

cycle, push the button in. If this option is selected, only the excess water

in the tub will drain leaving the clothes wet. The "No Spin" button when

pushed in will not activate the spin cycle.

Advantages of No-Spin Cycle:

• The spin cycle may cause excessive creasing and wrinkling in some fabrics.

•High speed spin might be too strong for delicate garments. It could result in

stretching or excessive wear.

Note: When the No Spin is pressed in, the machine will not automatically go to

the spin dry function.

Water Saver:

• To activate this option press in the "Water Saver" button. If you are washing a

small or a medium load you may want to use this option. This will reduce the

water in the rinse cycle.

English

"Front Load"Washer

This style of washing is gentle on your laundry because it has a tumble wash action.

Here there is no agitator to damage your clothes. Since there is no agitator in this

style of washer, the washer runs quietly. This style of washer saves you money as it

uses less water and detergent to clean your laundry.

OPERATIONS

ON/OFF

SPIN

XQG50-11 Manual 10/29/02 1:51 PM Page 9

English

Wash Cycle

Turn the knob CLOCKWISE only to your desired setting when selecting the cycle.

Below is the cycle reference chart for your clothes.

Follow the steps below to select the proper cycle:

1. Select proper cycle.

2. Turn the knob clockwise. Make sure to line up the symbol indicator on the control

panel.

3. Push the power "ON" button.

Wool Cotton

Synthetic

Wash cycle

Prewash

Intense

Normal

Delicate

Rinse

Softening

Spin Hot

Warm

Cold

Dry/Off

Intense

Normal

Delicate

Rinse

Softening

Dry/Off

spin

Delicate

Rinse

Sottening

Spin

Draining Off

Cotton Cycle

1-Pre-wash

2-Intense

3-Normal

4-Delicate

5-Rinse

6-Softening

7-Spin

8-Dry/Off

Synthetics

A-Intense

B-Normal

C-Delicate

D-Rinse

E-Softening

F-Spin

G-Dry/Off

Wool

I-Delicate

II-Rinse

III-Softening

IV-Spin

V-Draining

VI-Off

XQG50-11 Manual 10/29/02 1:51 PM Page 10

Cotton Cycle:

Pre-Wash Cycle: The purpose of this cycle is that if you want to pre-wash heavily

soiled clothes before the actual wash cycle begins. This cycle is configured in such a

manner that it will go through Intense Normal Delicate wash cycles time

mode and then the rinse and spin cycles automatically to complete the wash. The

total time for this cycle is approximately 147 minutes when selected.

Intense Wash Cycle: This is used for work & play, household linens, heavily

soiled and cotton clothes. This cycle is approximately 120 minutes.

Normal Wash Cycle: This is used for normal to lightly soiled items that needs to

be washed. This cycle is approximately 80 minutes.

Delicate Wash Cycle: This is also used for load of soiled items that needs to be

washed delicately. This cycle is approximately 60 minutes.

Synthetics Cycle:

Intense Wash Cycle: This cycle is used for heavily soiled permanent press, silks,

woolens, nylon and acrylic fabrics. This cycle is approximately 59 minutes.

Normal Wash Cycle: This is used for a small load of lightly soiled items that

needs to be washed. This cycle is approximately 42 minutes.

Delicate Wash Cycle: This cycle is used for loads of soiled items that need to be

washed delicately. This cycle is approximately 33 minutes.

•If you set the machine to automatically dry after the wash cycle, the machine will

wash and then dry without interruption. However if you press "No Spin" button

the machine will drain and shut-off after the wash cycle is complete. It will not

spin or advance to the dry cycle.

•If you do not set the machine for automatic drying and do not depress the "No

Spin" button after the wash portion of the cycle is complete (at "Soak/Pause"

indication on control panel) the machine will stop. You must either:

A) Drain Only: Prevent spinning by pressing the On/Off switch, advance the

“Cycle Selector Knob” to “Drain” and again press the "On/Off" switch.

B) Drain and Spin: Press the On/Off switch, advance the "Cycle Selector Knob"

to "Spin" and again press the "On/Off" switch.

English

XQG50-11 Manual 10/29/02 1:51 PM Page 11

English

Wool Cycle:

Delicate Wash Cycle: This cycle is used for delicate fabrics that are often

washed by hand. This cycle is approximately 32 minutes.

•After the wash position of the cycle is complete (at "Soak" indication on control

panel) the machine will stop. You must either:

A) Drain Only: Prevent spinning by pressing the On/Off switch, advance the

"Cycle Selector Knob" to “Drain” and again press the "On/Off" switch.

B) Drain and Spin: Press the On/Off switch, advance the "Cycle Selector Knob"

to "Spin" and again press the "On/Off" switch. Please note that if you press

the "Spin Cancel" button before starting the Wool cycle, the machine will

automatically drain and shut-off. Here you do not have to touch the control

panel. The machine will not automatically switch over to the dryer function.

Note: If the Spin Cycle is at "OFF" position before starting a cycle, the machine

will automatically switch to drain and shut off. The machine will not

automatically switch over to the dryer function.

XQG50-11 Manual 10/29/02 1:51 PM Page 12

English

Temperature

The water temperature is preset so when you select wash cycle it will set the proper

temperature for that wash load.

Please see the chart below to understand the proper temperature for each cycle:

Type of Cycle Type of Temperature

Cotton Cycle

Pre-Wash Cold

Intense Hot

Normal Warm

Delicate Cold

Rinse Cold

Synthetic Cycle

Intense Hot

Normal Warm

Delicate Cold

Rinse Cold

Wool Cycle

Delicate Cold

Rinse Cold

Note: Hot water needs to be at a temperature of at least 120 degree F 140

Degree F (49 Degree C - 60 Degree C) for the soap to dissolve and to avoid

soap residue remaining on clothes. If your water temperature is not at above

described level when washing your clothes, you need to regulate your water

heater to maintain that temperature.

Loading the Washer:

• Load each item loosely.

•Separate the white and colored clothes. Separate heavy clothes from light clothes.

•Carefully check all pockets and cuffs for small items. They can easily slide in to the

tub and may damage the tub.

• Pre-treat all stains and heavily soiled areas for best results.

• Do not overload your washer.

•Close the door properly after loading the clothes.

XQG50-11 Manual 10/29/02 1:51 PM Page 13

Proper Use of Dispenser:

The detergent/softener dispenser is located on the upper left corner of the washer.

Open the dispenser by pulling it out. You will see that there are four compartments.

"1" Compartment: This is used for liquid detergent for pre-wash. This is used

when you want to pre-wash heavily soiled dirty clothes before going to actual wash

cycle.

"2" Compartment: This is used for liquid detergent for actual wash cycle.

"A" Compartment: This is used for liquid fabric softener.

"C" Compartment: This is used for bleach.

Proper Use of Fabric Softener:

•Pour in liquid fabric softener into the compartment as recommended by the

manufacturer.

• Do not exceed the level in the compartment to avoid overflow.

English

("1" Compartment-

For pre-wash liquid detergent) ("2" Compartment-

For liquid detergent)

("A" Compartment-

For liquid fabric softener)

XQG50-11 Manual 10/29/02 1:51 PM Page 14

English

Proper Use of Detergent:

Low-Susding is recommended for front load style washers. This type of detergent

prevents damage to your washing machine; which may be caused by excess

amount of suds entering the condensing compartment.

Note: You can use less or more detergent depending on the size of the load, water

type in your area whether it is soft or hard and whether the clothes are

heavily soiled or lightly soiled. Besides the performance of the washing

machine the quality of the detergent also affect the washing result.

Warning: •Never pour fabric softener directly onto clothes as it may stain your

clothes or you may get spots on your clothes.

•Do not use powder form of softener into dispenser it may clog up the

dispenser. This dispenser is only designed for liquid only.

Dryer Operation:

• Your dryer is "condensing type" which means it requires no venting. During

the drying process, the evaporating water from your clothes is condensed by the

machine and drained in the form of water out of the drain hose. The machine

uses small amount of fresh water that is automatically fed to the machine from the

inlet hose. You may hear that the machine is drawing water during the dry cycle.

• With this vent-less design, you can install the dryer under the counter to have a

built-in look or any other enclosed area.

Note: The drying operation of this unit is different then other dryers you may have

used in the past. Large household and laundromat dryer operate on 220

volt which supply more elctricity and allows faster drying time. Your washer

& dryer combo unit operates on 115 volts; which supply less electricity,

resulting in longer drying time.

• You can select drying time from 2 settings. 120 mintutes for High Temp and up to

80 minutes for Low Temp. See below the recommended

temperature and time setting for different clothes:

Dry Time Selection

120 minutes

80 minutes

Heat Type

High

Low

Types of clothes

For jeans and towel

etc.

For light garments such

as bed sheets, skirts,

socks etc.

XQG50-11 Manual 10/29/02 1:51 PM Page 15

English

Note: For full loads, you may want to remove 1/3to 1/2of the load and dry the

remaining clothes seperately. This will be an efficient way to dry your clothes

and will not take as long to dry. For less than full loads, you may want to

reduce drying time. This will prevent over drying of your clothes.

Manual Operation of the Dryer:

• To operate the dryer manually, simply load machine with wet clothes, turn the

"Dryer Selector Knob" to the desired time and push the power button "ON".

Note: When operating the dryer, you must keep "Wash Cycle Selector" knob in

the "OFF" position.

Automatic Operation of the Dryer:

•For the automatic operation, simply set the Dry Cycle Selector Knob to the desired

time at the beginning of the wash cycle. When the wash cycle is finished, the

dryer will turn on automatically.

Note: The dryer will not turn on automatically if the "No Spin" button is pushed in.

You must keep the "No Spin" button in an out position in order to go from

wash function to dryer function automatically. The dryer will not come on

automatically after the wool cycle.

Note: When washing full load, we recommend that you keep the spin cycle in the

"OFF" position to prevent the unit from going to dry mode automatically at

the end of cycle if the spin cycle was in "ON" position. This will give you the

flexibility to take out 1/3 to 1/2 of the load and dry the remainder. The

advantage is that your clothes will dry evenly and more quickly.

Loading the Dryer:

1. Sort clothes for drying. Seperate dark and light colored items, like you do for

washing. Check for stains that have not been removed in washing. Dryer heat

may permanently set some stains. Properly dried clothes will need minimum of

care when removed from dryer.

2. Load up dryer with washed clothes. For optimum result, use dryer load of similar

weight, fabric and construction. Place small items in a mesh bag to prevent from

tangling. Do not overload the dryer. Add fabric softener sheet if desired.

3. Select the drying time depending on the fabric type and load size.

4. Wait for the drying cycle to finish before opening the door.

Note: Do not over dry your clothes. over drying can cause shrinkage,

harshness and wrinkling of fabric.

XQG50-11 Manual 10/29/02 1:51 PM Page 16

English

Button Trap

•Button Trap is designed to collect small objects such as button, coins, etc. As this

may happen very rarely, we recommend to check trap no more than twice a year.

•Button trap is located on the bottom front right corner behind the small door

cover. Push on the bottom to open the door cover. To remove the trap, turn the

knob to counter clockwise position. This will unlock the trap. To put it back, turn

the knob to clockwise position. This will lock the trap.

Casters

For your convenience, your machine comes with casters. Casters are located on the

bottom front right and left side of the machine. Pull the caster levers out towards you

to unlock the casters. When the machine is placed in the appropriate location push

caster levers back into position.

XQG50-11 Manual 10/29/02 1:51 PM Page 17

English

Warning: Always unplug your appliance to avoid electric shock before cleaning.

Ignoring this warning may result in death or injury. Before using

cleaning products, always read and follow manufacturer’s instructions

and warnings to avoid personal injury or product damage.

Cleaning and Maintenance

Use only damp or sudsy cloth for cleaning control panel.

• To avoid any kind of damage to cabinet finish, wipe appliance cabinet as

needed. If you spill liquid/powdered softener, bleach or detergent on the cabinet,

wipe cabinet immediately because it can damage the finish.

•Do not use any abrasive, harsh chemicals, ammonia, chlorine bleach,

concentrated detergent, solvents or metal scouring pads. Some of these chemicals

may dissolve, damage and/or discolor your appliance.

•Remove pins or other sharp objects from clothes to prevent scratching of the

interior parts.

• You should check the button trap at least twice a year. Do not use the washer

without the button trap in place.

•The Detergent Dispenser Compartment is removable. Over time, this compartment

may accumulate dried detergent, dirt and debris. You must remove it, then rinse in

a sink or remove debris with a soft brush.

Care and Cleaning Guide

Normal Operating Sounds

The following sounds are normally heard during the

operation of the washer:

• Tumbling sounds: This is normal as the heavy wet clothes in the Washer are

continuously being tossed around.

•Air rushing noise: This happens when the Washer tub spins at very high RPM.

• Wash and Rinse cycles going on and off will also make clicking sounds.

XQG50-11 Manual 10/29/02 1:51 PM Page 18

English

Moving & Vacationing

• Turn off water supply faucets and disconnect hoses. Drain water from all hoses.

This will prevent from damaging due to water leakage if the hoses accidentally get

ruptured or they become loose.

• Disconnect electrical plug.

• Dry inner wash tub. If moving washer, disconnect drain hose.

• Turn the leveling legs clockwise all the way in.

•Reinstall both shipping bolts and metal brackets in the back to prevent internal

part from shaking when appliance is moving to another location.

• To prevent mold or mildew, leave door open so moisture inside machine

can evaporate.

Storage of Your Appliance in Cold Environment

• This appliance must be stored at room temperature.

•If you just got delivery of this appliance when outside temperature is below

freezing, do not operate until this appliance has warmed to room temperature.

•Do not install or operate this appliance in the area where room temperature is

below freezing.

XQG50-11 Manual 10/29/02 1:51 PM Page 19

English

Washer does not operate:

• Check if unit is plugged in. The plug may have come loose.

• Check if the electrical wall receptacle is of proper voltage.

•Check if the circuit breaker needs to be reset or if the fuse needs to be replaced.

• Check if the unit is in “Off” mode.

•Check if the washer is overloaded: load may need to be re-balanced and clothes

may need to be redistributed.

• Check if the door is open. You may have to close the door properly.

•Check if the control knob is set properly. You may have to adjust the control knob.

•The washer pauses in some cycles. This is normal in cycle, which has short soak

period where your clothes are being soaked for very short period of time. You will

not hear washer operation for a short period of time. When the soak time is over,

it will start automatically.

Problems with water:

•Not enough water coming out: Water faucet may need to be turned on fully.

Water hoses may be tangled up or wrinkled up. Straighten up hoses. Check water

saver selection, it may need to be readjusted.

• Water Temperature is incorrect: Check your water heater temperature. Hot water

needs to be at a temperature at least 120˚F -140˚F (49˚C – 60˚C). Check to

make sure the inlet hoses are properly connected. (e.g. hot to hot & cold to cold)

• Water leaks: This is due to not properly installing drain hose or fill hoses. Your

home drain may be clogged or having constant water pressure. You may need to

tighten hoses, check the plumbing or call a plumber.

• Water pumped out before the cycle is completed: It happens if you open the door

in the middle of cycle.

• Water will not drain: This is due to not installing your drain hose properly. You

may need to connect the drain hose properly. Check the position of the drain

hose. In order to drain properly, make sure that top of drain outlet is less than 4

ft. (1.2 m) above the floor.

Troubleshooting

XQG50-11 Manual 10/29/02 1:51 PM Page 20

English

Washer is making noise:

• Washer may need to be reinstalled. (Check washer installation section)

• Washer load may need to be re-balanced, as the load may be uneven.

•Coins, loose change, buttons or other heavy objects could make noise

(read Operating Guide – Normal Operating Sounds).

• Squealing Sound: Due to overloaded wash tub.

• Vibration Noise: Due to not leveling washer properly on the floor and uneven

distribution of clothes in the tub.

Problems with clothes:

•Clothes are too wrinkled: this is due to improper sorting, overloading and

washing in too hot water repeatedly. Avoid overloading and resort your load. Do

not mix heavy clothes such as work clothes with light clothes such as blouses, light

shirts and delicate items. You may need to wash in warm or cold water.

•Have soap residue: detergent may not be dissolving in water. Check water

temperature or you need to add detergent as wash tub is being filled with water

before you load your clothes to avoid soap residue on clothes.

•Spots or stains on your clothes: this is due to incorrect use of fabric softener. You

may need to follow proper manufacturer instructions on the container and follow

proper directions for using the softener.

•Clothes are grayed or yellowed: this is due to not pouring enough detergent for

large loads. You may have to add more detergent to the load.

•Clothes are ripped & have holes/excessive wear & tear: this is due to sharp

objects such as pins and belt buckles left in pockets. You will need to remove small

loose sharp objects. Fasten belts, zippers, metal snaps etc. Check if you are using

undiluted bleach. Never add undiluted bleach to wash.

Dryer does not operate:

• Check if unit is unplugged. The plug may have come loose.

•Check if the circuit breaker needs to be reset or if the fuse needs to be replaced

• Check if the unit is in "OFF" mode. Press the "ON" button again.

• Check if the door is open.

XQG50-11 Manual 10/29/02 1:51 PM Page 21

English

Dryer is working but not drying the clothes:

• Unit may be over loaded. The dryer drum should only be half full.

•Dryer load needs to be resorted. Heavy clothes may need to be separated from

regular clothes.

• Bulky clothes may require repositioning.

•If clothes dry unevenly, a higher dry setting may be required or clothes in the

dryer may need to be resorted.

Dryer making noise when drying:

•Coins, loose change, buttons and other heavy objects could make noise.

•Dryer may need to be leveled evenly. Read Operating Guide-Normal

Operating Sounds.

Static:

• Caused by over drying. Adjust for shorter drying time.

• Mix with synthetic fabric. Sort and separate different fabrics.

• Use a fabric softener.

XQG50-11 Manual 10/29/02 1:51 PM Page 22

English

INSTALLATION INSTRUCTIONS

Tools and Materials Required

You will need to have following tools to help

you in the installation of your Washer:

• Scissors

• Phillips Screwdriver

• Standard Screwdriver

• Pliers

• Wrench

• Tape Measure

• Gloves

• Level

Accessories Supplied Quantity

1. Hot & Cold water inlet hoses 2

2. Wrench 1

3. Flat Water Inlet Hose Washers 4

4. Gooseneck 1

5. Plastic Plugs 3

345

XQG50-11 Manual 10/29/02 1:51 PM Page 23

English

Unpacking Your Appliance

•Remove all packing materials including transportation bolts and brackets. Also

remove adhesive tape holding the accessories inside and outside.

•Inspect and remove any remains of packing, tape or printed materials before

using the washer.

•Remove 2 bolts, 4 screws and 1 center bolt holding metal bracket from the back

of the unit that are installed to protect drum and internal components from dam-

age during shipping. (Wrench is included in the instruction manual bag)

•Screws and Bolts must be removed before using the machine. Once removed,

save them so when moving you can reinstall to protect the machine from damage

during shipping.

•Once you remove the bracket, reinstall bracket screws, for center bolt and 2 side

bolts. Use supplied plastic plugs to prevent damage to the machine.

Bracket

Bolt

(use plastic plugs)

Screws(2) Screws(2)

Center bolt

(use plastic plug) (not shown)

Bolt

(use plastic plugs)

XQG50-11 Manual 10/29/02 1:52 PM Page 24

Leveling Your Appliance

• Your washer has 4 leveling legs; which are located on the four bottom corners.

After properly placing your washer in its final position, you can level your washer.

•Leveling legs can be adjusted by turning them

counterclockwise to raise your washer or turning

them counter clockwise to lower your washer.

Steps for Installation

Select a suitable location for this appliance on a hard even surface away from

direct sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances

etc. Any floor unevenness should be corrected with the leveling legs located

underneath, on the bottom corners. This appliance must be placed at room

temperature. You must not place this appliance where the temperature is at below

freezing.

Installing Your Washer:

Read install instructions carefully before installation.

Caution: If, after completing these steps, you are unsure that unit is properly

installed, contact a qualified installer. To ensure that your appliance is

properly installed it is recommended that it be installed by a certified

installer.

1. Insert a new flat washer into each end of the inlet hoses. Firmly put the washers

in the coupling.

Note: You may have to use pliers to tighten the coupling. Do not over tighten

because you may cause damage to the valve.

English

XQG50-11 Manual 10/29/02 1:52 PM Page 25

2. Connect the hot and cold water inlet hoses to the hot and cold water faucets

respectively.

3. Connect the other end to their respective washer inlet located at the rear.

Note: Hot water needs to be at a temperature of at least 120˚F – 140˚F.

(49˚C- 60˚C) for the soap to dissolve and to avoid soap residue

remaining on clothes.

4. Install the drain hose into a drain pipe. The drain hose must be placed into a

drainpipe at least 1 1/2 inches in diameter or directly into a sink. Use the “goose

neck” to hold hose in place. To avoid possible water back up, the drain hose

must reach height of at least 31 1/2 inches minimum and 40 inches maximum. If

the sink is less than 37 1/2 inches in height, route drain

hose through the clip on the back of the machine.

English

Drain Hose

Water Supply Hose

Hose Bend Drain Hose

Goose Neck

Water Inlet

SINK

XQG50-11 Manual 10/29/02 1:52 PM Page 26

English

(Route Drain Hose through Clip)

Note: Inspect carefully for any leaks around and back of the machine. If leak

occurs, double check to see if any connections are loose. You may need to

tighten any loose connections.

5. Plug in the Washer to a regular 115 volt / 60 Hz, 15 amp outlet.

Unit Dimensions

XQG50-11 Manual 10/29/02 1:52 PM Page 27

Grounding Instructions

This appliance must be grounded. In the event of an electrical short circuit,

grounding reduces the risk of electric shock by providing an escape wire for

the electric current. This appliance is equipped with a cord having a grounding

wire with a grounded plug. The plug must be inserted into an outlet that is

properly installed and grounded.

•Improper use of the plug can result in a risk of electric shock.

•Consult a qualified electrician or service person if the grounding

instructions are not completely understood or if doubt exists as to

whether the appliance is properly grounded.

Wiring Requirements:

•This appliance must be plugged into at least 15 AMP 115-120 VOLT,

60 HZ GROUNDED OUTLET.

Note: Where a standard two-prong

outlet is encountered,

it is the personal responsibility

and obligation of the

consumer to have it replaced

with a properly grounded

three-prong outlet.

Extension Cords:

We do not recommend that you use an extension cord.

Power Interruptions

Occasionally there may be power interruptions due to thunderstorms or other

causes. Remove the power cord from AC outlet when a power outage occurs. When

power has been restored re-plug power cord to AC outlet. If outage is for a

prolonged period, clean washer before using it again.

Electrical Connections

English

XQG50-11 Manual 10/29/02 1:52 PM Page 28

Limited Warranty

In Home Service

Full ONE Year Warranty

For 12 months from the date of original retail

purchase, Haier will repair or replace any

part free of charge including labor that fails

due to a defect in materials or workmanship.

Limited Warranty

After one year from the original retail

purchase date, Haier will provide a part at

no cost, as indicated below, to replace said

part as a result of a defect in materials or

workmanship. Haier is solely responsible for

the cost of the part. All other costs such as

labor, trip charge, etc are the responsibility

of the owner.

Third through Fifth Year

Haier will provide the cabinet assembly

should the cabinet rust through

Third through Tenth Year

Haier will provide the inner stainless steel

wash tub.

NOTE: This warranty commences on the

date the item was purchased and the original

purchase receipt must be presented to the

authorized service representative before

warranty repairs are rendered.

Exceptions: Commercial or Rental

Use Warranty

90 days labor from date of original purchase

90 days parts from date of original purchase

No other warranty applies

For Warranty Service

Contact your nearest authorized service

center. All service must be performed by a

Haier authorized service center. For the name

and telephone number of the nearest autho-

rized service center please call 1-877-337-

3639.

Before calling please have available

the following information:

Model number and serial number of your

appliance.The name and address of the

dealer you purchased the unit from and the

date of purchase. A clear description of the

problem. A proof of purchase (sales receipt).

This warranty covers appliances

within the continental United States,

Puerto Rico and Canada. What is

not covered by this warranty:

Replacement or repair of household fuses,

circuit breakers, wiring or plumbing.

A product whose original serial number has

been removed or altered.

Any service charges not specifically

identified as normal such as normal

service area or hours.

Damage to clothing.

Damage incurred in shipping.

Damage caused by improper installation

or maintenance.

Damage from misuse, abuse accident, fire,

flood, or acts of nature.

Damage from service other than an

authorized Haier dealer or service center.

Damage from incorrect electrical current,

voltage or supply.

Damage resulting from any product

modification, alteration or adjustment

not authorized by Haier.

Adjustment of consumer operated controls as

identified in the owners manual.

Hoses, knobs, lint trays and all attachments,

accessories and disposable parts.

Labor, service transportation, and shipping

charges for the removal and replacement

of defective parts beyond the initial

12-month period.

Damage from other than normal

household use.

Any transportation and shipping charges.

THIS LIMITED WARRANTY IS GIVEN IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED

OR, INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE

The remedy provided in this warranty is

exclusive and is granted in lieu of all

other remedies.

This warranty does not cover incidental or

consequential damages, so the above

limitations may not apply to you. Some states

do not allow limitations on how long an

implied warranty lasts, so the above

limitations may not apply to you.

This warranty gives you specific legal rights,

and you may have other rights, which vary,

from state to state.

Haier America

New York, NY 10018

XQG50-11 Manual 10/29/02 1:52 PM Page 29

XQG50-11

Issued: September 02

IMPORTANT

Do Not Return This Product To The Store

If you have a problem with this product, please contact the "Haier Customer

Satisfaction Center" at 1-877-337-3639.

DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE

IMPORTANT

Ne pas Réexpédier ce Produit au Magasin

Pour tout problème concernant ce produit, veuillez contacter le service des

consommateurs ‘Haier Customer Satisfaction Center’ au 1-877-337-3639.

UNE PREUVE D’ACHAT DATEE EST REQUISE POUR BENEFICIER DE LA GARANTIE.

IMPORTANTE

No regrese este producto a la tienda

Si tiene algún problema con este producto, por favor contacte el "Centro de Servicio al

Consumidor de Haier" al 1-877-337-3639 (Válido solo en E.U.A).

NECESITA UNA PRUEBA DE COMPRA FECHADA PARA EL SERVICIO DE LA GARANTIA

240 V, 60 Hz

Made in China

Fabriqué en Chine

Hecho en China

Haier America

New York, NY 10018

Printed in China

Part #

XQG50-11 Manual 10/29/02 1:51 PM Page 1

Haier XQG50 11 User Manual To The 242b87a4 959c 4a31 9d39 C21a21d394b0

Navigation menu

Versions of this User Manual:

Views

Navigation