Hame Technology 434T 3G Router User Manual

Hame Technology Co.,Limited 3G Router

user manual

Quick Start Guide 1 Super 3G Router 434T Quick Start Guide ------------------------------------------ Version: 1.0-----------------------------------------------------------
Quick Start Guide 2 Contents 1 CHECK PACKAGE CONTENTS ............................................................................................................ 3 2 SYSTEM REQUIREMENTS ................................................................................................................. 3 3 APPEARANCE .................................................................................................................................. 4 4 QUICK ROUTER SET-UP .................................................................................................................... 5 STEP1：INSERT THE SIM CARD ................................................................................................................... 5 STEP 2: CONNECT TO A PC .......................................................................................................................... 5 STEP 3: CONNECT TO A TELEPHONE SET ......................................................................................................... 6 STEP 4: CONNECT THE EXTERNAL ANTENNA (OPTIONAL) .................................................................................... 6 STEP 5: CONNECT TO THE POWER ADAPTER .................................................................................................... 6 5 CONFIGURE THE NETWORK SETTINGS ............................................................................................. 7 6 CONFIGURE 3G ROUTER ................................................................................................................ 10 STEP 1: OPEN WEB MANAGEMENT ............................................................................................................ 10 STEP 2: INPUT USER AND PASSWORD ......................................................................................................... 10 STEP 3: INTELLIGENT GUIDE ...................................................................................................................... 11 STEP 4: ADMINISTRATOR INFORMATION CONFIGURATION................................................................................ 11 STEP 5: CONFIGURE THE SYSTEM TIME ........................................................................................................ 12 STEP 6: CONFIGURE WAN INFORMATION ......................................................................................... 12 STATIC Mode ................................................................................................................................... 13 DHCP Mode .................................................................................................................................... 13 PPPOE (ADSL) MODE ............................................................................................................................ 14 PPTP and L2TP (Establish a tunnel via PPTP or L2TP and get connected to a VPN) ....................... 14 3G Mode ......................................................................................................................................... 15 STEP 7: CONFIGURE LAN INFORMATION ...................................................................................................... 17 STEP 8: CONFIGURE WLAN INFORMATION .................................................................................................. 18 7 RESTORING THE FACTORY DEFAULTS ............................................................................................. 19
Quick Start Guide 3 1 Check Package Contents 3G Router x1 DC9V 1.5A Power Adapter x1 Quick Start Guide x1 3G External Antenna（option） 2 System Requirements The recommended PC configuration for using the Router is as follows:  CPU: Pentium 500 MHz or above  Memory: 128 MB RAM or above  Hard disk: 100 MB or above of available space  Operating System: Windows®2000, XP, Vista, Linux 2.4/2.6  Internet Browser: Internet Explorer 6.0 or Internet Explorer 7.0, Firefox 1.5 or Firefox 2.0, Safari 3.0
Quick Start Guide 4 3 Appearance (Figure 1)
Quick Start Guide 5 4 Quick Router Set-up Step1：Insert the SIM card Warning Before inserting or removing the SIM card, you must disconnect the device from the power adapter. If you are required to enter the PIN code, enter the correct one. If you fail to enter the correct PIN or PUK code, the network-related functions are unavailable. The SIM card is supplied by the service provider. For details, contact your service provider. Insert the card into the slot completely, as shown in the following figure. To remove the card, press the card gently. Now the card will pop up automatically. Step 2: Connect to a PC If the indicator of the Ethernet interface connecting with a network cable is on, the connection is successful. The Ethernet cable cannot be longer than 100 meters (328 feet). To achieve better effect, use the shielded cable. (Figure 2) (Figure 3)
Quick Start Guide 6 Step 3: Connect to a telephone set The communication quality of the telephone set can be interfered by the wireless signal. Place the telephone set one meter away from the device. Step 4: Connect the external antenna (optional) Connect the external antenna cable with the antenna jack on the main unit. Screw the cable to make sure that the antenna is tightly connected with the antenna jack. Step 5: Connect to the power adapter Use a power adapter that is compatible with the device; otherwise, the device may be damaged. (Figure 4) (Figure 5)
Quick Start Guide 7 5 Configure the network settings Step1: On the desktop, right-click on “My Network Places”, select “Properties”. Step2: In the following pop-up window, right-click on “Local Area Connection” and select “Properties”. (Figure 7) (Figure 6)
Quick Start Guide 8 Step3: In the following window, select “Internet Protocol (TCP/IP)” option, and then click “Properties”. Step4: In the following pop-up window, select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Then click“OK”. Step5: If you selected LAN connection. Please double check if the Gateway is really connected to your computer, when “Local Connection” is showing already connected. Then click “Start” menu and open “Run” program, input “CMD” as figure 10. 【If you selected WIFI connection, Before step3, please click on “Wireless Network (Figure 9) (Figure 10)
Quick Start Guide 9 Connection” icon in the lower right of desktop, check the wireless network status and select your wireless network. Then connect to it.】 Step6: Input order “ping 192.168.1.1” and click “Enter”, it will get the following result which is showing the above configuration is successful. (Figure 11) (Figure 12)
Quick Start Guide 10 6 Configure 3G Router Step 1: Open Web Management Open Web browser, input 192.168.1.1 at Address bar, then press “Enter”. Step 2: input USER and Password the following pop-up window, both input “admin” at “User name” bar and “Password” bar, then press “OK”. (Figure 13)
Quick Start Guide 11 Step 3: Intelligent Guide Click “Quick Setup Guide” as displayed on the major interface and make use of the intelligent guide functions of the router. It enables the first time configuration of the router’s time, administrator information, internal and external network ports. Step 4: Administrator Information Configuration Account: an account (user name) to log into the management interface. The default system account is admin. Password: a password to log on the management interface. The default system password is admin. (Figure 14) (Figure 15)
Quick Start Guide 12 Click Next to Configure the System Time Step 5: Configure the System Time Click “Next” to Configure 3G Mode Current time: display the system time of the router. Sync with host: make sure that the router’s time settings are consistent with those of the PC. NTP Server: set up an Internet-based time server. Every once in a while, the router sets up its time and makes sure that its time is consistent with that of the server. NTP synchronization (hours): intervals for the router to obtain data from the time server. Step 6: Configure WAN Information There are six online methods (STATIC, DHCP, PPPOE (ADSL), L2TP, PPTP and 3G) for the extranet. (Figure 16) (Figure 17)
Quick Start Guide 13 STATIC Mode IP address: Static IP address provided by the ISP. Subnet mask: provided by ISP. Default Gateway: Fill in the gateway address as provided by the ISP. Primary DNS Server: Fill in the DNS server as provided by the ISP. Different areas have different DNS addresses. Secondary DNS Server: Fill in the DNS server as provided by the ISP. Different areas have different DNS addresses. DHCP Mode Obtain IP and DNS information relating to the extranet ports from the DHCP server and make sure that the extranet ports connect to DHCP server. You can choose not to fill in the network name。
Quick Start Guide 14 PPPOE (ADSL) Mode User Name: Fill in the Internet access account as provided by the ISP. Please place enquiries on the ISP in case of any queries. Password: Fill in the password as provided by the ISP. Please place enquiries on the ISP in case of any queries. Operation modes: Divided into “Keep Alive” connection, “Manual” connection and “On Demand” connection. Keep Alive: Under this mode, the system will connect to the network automatically after the start-up. If the network is disconnected while being used due to external reasons, the system will try to get access to the network every once in a while until the network is connected successfully. Manual connection: Under this mode, the user has to manually handle the dialup connection if the network is disconnected. Under the “On-Demand” mode, the system will be connected to the network automatically in case of WAN access requests. If there are no network access requests within the specific period (idle time), the system will disconnect to the network automatically. This connection mode could effectively save network access fees for users that select to make payment by the time actually consumed. PPTP and L2TP (Establish a tunnel via PPTP or L2TP and get connected to a VPN) Server IP: Fill in the IP address as provided by the ISP. This is mandatory. User Name: Enter the user name used by L2TP dial-up. This is mandatory and shall be provided by the operator. Password: Enter the password used by L2TP dial-up. This is mandatory and shall be provided by the operator. Address mode: There are two ways to obtain the address, namely the static mode and the
Quick Start Guide 15 dynamic mode. 1. Please select the dynamic IP if you can automatically obtain IP addresses from the ISP. There is no need to fill in the information included in the following three columns if you select the dynamic mode. 2. If you have fixed IP address as provided by the ISP, please select the static IP and fill in three items (namely IP address, subnet mask and default gateway) in the following columns. Operation mode: 1. Keep Alive: If you select the continuous connection mode, the system will connect to the network automatically after the start-up. If the network is disconnected while being used due to external reasons, the system will try to get access to the network every once in a while until the network is connected successfully. 2. Manual: Under this mode, you have to re-dial-up manually after the network is disconnected. 3G Mode Run Type: Under the “Keep Alive ”mode, the router will dial up automatically and get connected to the Internet when 3G equipment is plugged in. Under the “Manual” mode, the access internet through dial-up will not be launched until the user clicks “Connection” on the status page.
Quick Start Guide 16 Under the “On-Demand” mode, the system will be connected to the network automatically in case of WAN access requests. If there are no network access requests within the specific period (idle time), the system will disconnect to the network automatically. This connection mode could effectively save network access fees for users that select to make payment by the time actually consumed. PIN settings: If your SIM/USIM/UIM card has a PIN code, you shall select “Use PIN” and fill in the PIN code in the following Input Box. Otherwise, you shall select “Unused PIN”. APN: If you select “Auto APN”, then information such as “APN Information”, “Dial Number”, “User” and “Password” shall be filled by the router automatically. If you select “Manual APN”, then you have to fill in such Internet access information by yourself. DNS type: If you select “Automatic DNS”, the router will use the DNS obtained by 3G dial-up. If the “Manual DNS” is selected, the router will use the DNS information entered by the user.
Quick Start Guide 17 Step 7: Configure LAN Information Click “Next” to Configure WLAN Information Intranet ports and DHCP settings IP Address: set up IP address for Intranet ports. Subnet Mask: set up masks for the Intranet. MAC Address: display the physical address of Intranet ports. DHCP Type: Select “Server” to open DHCP services and then the host in the Intranet could obtain IP dynamically. Start IP address-End IP address: IP obtained by the host in the Intranet via DHCP mode are included in this range. Default gateway: set up the gateway for the host in the Intranet. DNS server: set up DNS server for the host in the Intranet. (Figure 19)
Quick Start Guide 18 Step 8: Configure WLAN Information Click “Apply ” to Complete configuration Radio On/Off: switch On or Off wireless networks. If Intranet clients do not select “Enable”, they could not get Wi-Fi connectivity to the Intranet of the router. Network Mode : select standards used by wireless networks. Options are 802.11b, 802.11g and 802.11n, or mix standards 802.11b/g,802.11b/g/n. Network Name（SSID）：Enter a name for your wireless local area network (WLAN). Security Policy： If “Disable” is selected, Intranet clients could have Wi-Fi connection to the router’s Intranet without entering key information. Security Poclcy:If “OPEN”, “SHARED” or “WEPAUTO” is selected, there is a need to set up the key information. Wireless clients in the Intranet cannot gain access to the router’s Intranet until correct key information is entered. You can fill in four (ASCII or Hex, Hex with a length of 10 or 26 characters, ASCII with a length of 5 or 13 characters) keys for this router at the most. One of the four groups of pre-set keys can be selected as the current effective key (default key). (Figure 20)
Quick Start Guide 19 7 Restoring the Factory Defaults You need to reconstruct the network or you forget he changes of some parameters, you can choose to restore factory defaults and reconfigure the device. Reset: Press and hold it to restore the factory defaults. After this operation, all configurations are restored to the defaults. (Figure 21)
FCC STATEMENT 1. This device complies with Part 15&22/24 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 　 Reorient or relocate the receiving antenna. 　 Increase the separation between the equipment and receiver. 　 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 　 Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Navigation menu