Hammerhead Navigation HH1NY Hammerhead One Navigation System User Manual Hammerhead Manual J edits pages
Hammerhead Navigation Inc. Hammerhead One Navigation System Hammerhead Manual J edits pages
Contents
- 1. Users manual
- 2. User manual
Users manual
Owner’s Manual
November 2014
All rights reserved. Under the copyright laws, this manual may not be copied, in whole
or in part, without the written consent of Hammerhead Navigation Inc (“Hammerhead”).
Hammerhead reserves the right to change or improve its products and to make changes
in the content of this manual without obligation to notify any person or organization of
such changes or improvements. Go to www.hammerhead.io for current updates and
supplemental information concerning the use of this product.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by Hammerhead is under license. Mac® is a registered trademark of
Apple Computer, Inc. microSDTM is a trademark of SD-3C, LLC. Windows® is a
registered trademark of Microsoft Corporation in the United States and other countries.
Wi-Fi® is a registered trademark of Wi-Fi Alliance Corporation. Other trademarks and
trade names are those of their respective owners.
Introduction
WARNING
Always consult your physician before you begin or modify any exercise program.
Getting Started
When using your device for the first time, you should complete these tasks to set it up
and learn about its basic features.
•1 Charge your device.
•2 Install your device using the mount.
•3 Turn on your device.
•4 Pair it with your smartphone.
•5 Go for a ride.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather cap, and the
surrounding area before charging or connecting to a computer.
The device is powered by a built-in lithium-polymer battery that can be charged using a
standard wall outlet or computer USB port.
NOTE: The device will not charge when outside the temperature range of 32° to 104°F
(0° to 40°C).
• 1 Pull up the weather cap A from the USB port B.
• 2 Plug the small end of the USB cable into the USB port on the device.
•3 Plug the large end of the USB cable into an AC adapter or a computer USB port.
•4 Plug the AC adapter into a standard wall outlet.
•5 Charge the device completely.
About the Battery
WARNING
This device contains a lithium-polymer battery.
Installing the Out Front Mount
•1 Select a secure location to mount the Hammerhead One device where it will not
interfere with the safe operation of your bike.
•2 Use the hex key to remove the screw X from the handlebar connector X.
•4 Place the rubber pad around the handlebar:
•If the handlebar diameter is 25.4 mm, use the thicker pad.
•If the handlebar diameter is 31.8 mm, use the thinner pad.
•5 Place the handlebar connector around the rubber pad.
•6 Replace and tighten the screw.
NOTE: Hammerhead recommends a torque specification of 7 lbf-in. (0.8 N-m). You
should check the tightness of the screw periodically.
•7 Align the tabs on the back of the Hammerhead One device with the bike mount
notches.
•8 Press down slightly and turn the Hammerhead One device clockwise until it locks
into place.
Releasing the Hammerhead One.
•1 Turn the Hammerhead One clockwise to unlock the device.
•2 Lift the Hammerhead One off the mount.
Turning On the Device
The first time you turn on the device, you will need to pair it with your smartphone.
•1 Hold the home button X.
•2 Open the Bluetooth Settings page on your smartphone.
•3 Ensure that Bluetooth is turned on.
•4 Select the Hammerhead One device from the list of bluetooth devices shown
Using the Headlight
At any time, you can turn on the headlight using the button X.
•1 Press the button X a second time to enter blinking mode.
NOTE: recommends using it on a blinking mode to conserve battery. The Headlight is
intended to aid in nighttime visibility. It is not intended to replace a dedicated headlight
for nighttime riding.
Going for a Ride
•1 Open the Hammerhead App on your smartphone.
•2 Follow the on screen instructions.
Device Information
Specifications
Hammerhead One Specifications
NOTE: device withstands incidental exposure to water of up to 1 meter for up to 30
minutes.
Device Care
NOTICE
Do not store the device where prolonged exposure to extreme temperatures can occur,
because it can cause permanent damage.
Never use a hard or sharp object to operate the touch screen, or damage may result.
Avoid chemical cleaners and solvents that can damage plastic components.
Secure the weather cap tightly to prevent damage to the USB port.
Cleaning the Device
•1 Wipe the device using a cloth dampened with a mild detergent solution.
•2 Wipe it dry.
Troubleshooting
Resetting the Device
If the device stops responding, you may need to reset it. This does not erase any of
your data or settings.
Hold for 10 seconds.
The device resets and turns on.
Improving GPS Satellite Reception on the smartphone
Ensure that your smartphone has wifi turned on. This improves its ability to determine
and track your position.
• Take your smartphone outside to an open area away from tall buildings and
trees.
• Remain stationary for several minutes.
Updating the Software
Before you can update your device software, you must have the Hammerhead app on
your smartphone and the smartphone pared with the Hammerhead One device.
•1 Open the Hammerhead App
•2 Follow the on-screen instructions.
•3 Do not disconnect your device from the computer during the update process.
Regulatory
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.
FR:
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son
fonctionnement est soumis aux deux conditions suivantes: (1) ce dispositif ne doit pas causer
d'interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement de l'appareil.
IMPORTANT! Changes or modifications not expressly approved by Hammerhead Navigation
Inc. could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Software License Agreement
BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE TERMS AND
CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE
READ THIS AGREEMENT CAREFULLY.
Hammerhead Navigation Inc. and its subsidiaries (“Hammerhead”) grant you a limited
license to use the software embedded in this device (the “Software”) in binary
executable form in the normal operation of the product. Title, ownership rights, and
intellectual property rights in and to the Software remain in Hammerhead and/or its third
- party providers.
You acknowledge that the Software is the property of Hammerhead and/or its third-party
providers and is protected under the United States of America copyright laws and
international copyright treaties. You further acknowledge that the structure, organization,
and code of the Software, for which source code is not provided, are valuable trade
secrets of Hammerhead and/or its third-party providers and that the Software in source
code form remains a valuable trade secret of Hammerhead and/or its third-party
providers. You agree not to decompile, disassemble, modify, reverse assemble, reverse
engineer, or reduce to human readable form the Software or any part thereof or create
any derivative works based on the Software. You agree not to export or re-export the
Software to any country in violation of the export control laws of the United States of
America or the export control laws of any other applicable country.
!
www.Hammerhead.io
Hammerhead Navigation Inc.
262 W38th st
1003
New York NY
© 2014 Hammerhead Navigation Inc. or its subsidiaries