Hammerhead Navigation HK1 Hammerhead Karoo User Manual Users Guide

Download:
Mirror Download [FCC.gov]
Document ID	3742886
Application ID	UvCtA4Y5nc0V7lCP5eXdNQ==
Document Description	Users Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.75kB (471922 bits)
Date Submitted	2018-02-06 00:00:00
Date Available	2018-02-06 00:00:00
Creation Date	2018-01-12 23:09:07
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-02-06 10:40:07
Document Title	Users Guide
Document Creator	Adobe InDesign CC 13.0 (Macintosh)

Getting Started
Welcome to Karoo
A new generation of cycling computer
First and foremost, we want to thank you for joining us on this ride.
Hammerhead’s mission is to reimagine the intersection of
cycling and technology.
Your support not only means a lot to us;
it fans the flames of a revolution that is long overdue.
Now, let’s get you rolling.
Installing Karoo on your bike:
1. Install the included Barfly mount. The clamp of the mount
should be placed on the handlebar, to the left of the stem.
2. To attach your Karoo to the mount, align the tabs on
Karoo’s bracket foot with the mount’s notches, then press
down slightly and twist. The device should click into place
after a quarter of a turn.
3. To release your Karoo from the mount, make another
quarter turn of the device, and it should pop out.
Setting up Karoo:
1. Power up your Karoo by pressing and holding the nontextured power button for a few seconds. (Note: The first time
you do this, powering up the unit will take longer than usual.)
2. After powering up, you will be prompted with a few setup
steps, like connecting to a WiFi network, and creating a
Hammerhead account.
3. Take some time to familiarize yourself with Karoo’s
interface: pair your sensors, create a rider profile, and try
making a route or two.
4. Get out there and ride!
Also, check out Karoo’s web-based dashboard, at dashboard.hammerhead.io. It’s
a powerful tool that allows you to create, import, and modify routes from your
computer, which automatically and immediately sync with your Karoo.
Visit our website to learn more about it.
IMPORTANT SAFETY AND
PRODUCT INFORMATION
Karoo Manual V1.1
Download the most recent version of the Karoo Manual at Hammerhead.io
Connecting the Device to Your Computer or Charger
NOTICE
To prevent corrosion or short circuit, thoroughly dry the USB port and the surrounding area before
charging or connecting to a computer.
Device Care
- Use air to blow out dust that may accumulate in the USB port.
- Do not direct a spray of water at the device.
- Intermittently check that the bracket foot bolt on the bottom of the device is tightened to 1N.M.
- After muddy or rainy rides, remove the back cover and clean the Karoo and cover under cool running
water. Do not use strong detergents or solvents. Ensure that the buttons and ports are free of debris.
- Only use a fingernail to gently remove the bottom cover. Do not use a tool, as this may damage the
device.
- Do not store the device where prolonged exposure to extreme temperatures can occur, because it can
cause permanent damage.
- Never use a hard or sharp object to operate the touchscreen, or damage may result.
- Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and
finishes.
About the Battery
A lithium-ion battery can be used in this device. If these guidelines are not followed, batteries may
experience a shortened life span or may present a risk of damage to the device, fire, chemical burn,
electrolyte leak, and/or injury.
- Do not disassemble, modify, remanufacture, puncture, or damage the device or batteries.
- Do not remove or attempt to remove the non-user-replaceable battery.
- Do not expose the device or batteries to fire, explosion, or other hazard.
- Do not use a sharp object to remove the removable batteries.
- Do not leave the device exposed to a heat source or in a high-temperature location, such as in the sun
in an unattended vehicle. To prevent the possibility of damage, remove the device from the vehicle or
store it out of direct sunlight, such as in the glove box.
- Do not operate the device outside of the temperature ranges -10°C to 50°C.
- When storing the device for an extended time period, store within the temperature ranges of 5°C to
25°C.
- Do not use a power adapter that exceeds an output of 2.5A.
- Contact your local waste disposal department to dispose of the device/batteries in accordance with
applicable local laws and regulations.
- KEEP BATTERIES AWAY FROM CHILDREN.
- NEVER PUT BATTERIES IN MOUTH. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.
WARNING
Failure to heed the following warnings could result in an accident or collision resulting in death or
serious injury.
- Always consult your physician before beginning or modifying any exercise program.
- If you have a pacemaker or other internal electronic device, consult your physician before using a heart
rate monitor.
- The Hammerhead device, accessories, heart rate monitor, and related data are intended to be used only
for recreational purposes and not for medical purposes, and are not intended to diagnose, monitor, treat,
cure, or prevent any disease or condition.
- The heart rate readings are for reference only, and no responsibility is accepted for the consequences of
any erroneous readings.
Bicycle Warnings
- Always use your best judgement, and operate the bicycle in a safe manner.
- Make sure your bicycle and hardware are properly maintained and that all parts are correctly installed.
Off-Road Navigation Warnings
If your Hammerhead device is able to suggest off-road routes for various outdoor activities, such as
biking, follow these guidelines to ensure safe off-road navigation.
- Always use your best judgment and exercise common sense when making off-road navigational decisions. The Hammerhead device is designed to provide route suggestions only. It is not a replacement for
attentiveness and proper preparation for outdoor activities. Do not follow the route suggestions if they
suggest an illegal course or would put you in an unsafe situation.
- Always carefully compare information displayed on the device to all available navigation sources,
including trail signs, trail conditions, weather conditions, and other factors that may affect safety while
navigating. For safety, always resolve any discrepancies before continuing navigation, and defer to posted
signs and conditions.
- Always be mindful of the effects of the environment and the inherent risks of the activity before embarking on off-road activities, especially the impact that weather and weather-related trail conditions can
have on the safety of your activity. Ensure that you have the proper gear and supplies for your activity
before navigating along unfamiliar paths and trails.
GPS Notice
The navigation device may experience degraded performance if you use it in proximity to any device
that uses a terrestrial broadband network operating close to the frequencies used by any Global Navigation Satellite System (GNSS), such as the Global Positioning Service (GPS). Use of such devices may
impair reception of GNSS signals.
Radio Frequency Radiation Exposure
This device is a mobile transmitter and receiver that uses an internal antenna to send and receive low
levels of radio frequency (RF) energy for data communications. The device emits RF energy below the
published limits when operating in its maximum output power mode and when used with Hammerhead
authorized accessories. The device should not be used in other configurations. This device must not be
co-located or operated in conjunction with any other transmitter or antenna.
Regulatory Labeling
This device uses e-labeling to display regulatory information. To access regulatory information on the
device follow these steps:
1. Tap “Settings”
2. Tap “About”
3. Tap “Regulatory Information”
All regulatory and certification information for the device will be displayed.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and may cause harmful interference to radio communications if not installed and used
in accordance with the instructions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet that is on a different circuit from the GPS device.
- Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC
Rules.
SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined
at the highest certified power level, the actual SAR level of the device while operating can be well below
the maximum value.
Before a new model device is available for sale to the public, it must be tested and certified to the FCC
that it does not exceed the exposure limit established by the FCC, Tests should be performed in
positions and locations (e.g. at the ear and worn on the body) as required by the FCC.
For body worn operation, this model device has been tested and meets the FCC RF exposure guidelines
when used with an accessory designated for this product or when used with an accssory that contains no
mental and that positions the handset a minimum of 5mm from the body.
Non-compliance with the above restrictions may result in violation of RF exposure guidelines
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
Changes or modifications not expressly approved by Hammerhead Navigation Inc. could void the user’s
authority to operate the equipment.
This product does not contain any user-serviceable parts. Any and all repairs or modifications must
be conducted exclusively by Hammerhead. Unauthorized repairs or modifications could result in
permanent damage to the equipment, and void your warranty and your authority to operate this device
under Part 15 regulations.
Users in Canada
This device complies with ISEDC license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
This equipment complies with ISEDC radiation exposure limits set forth for an uncontrolled environment
and meets RSS-102 of the ISEDC radio frequency (RF) Exposure rules.
Pour les usagers résidant au ISEDC
Le présent appareil est conforme aux CNR d’ ISEDC applicables aux appareils radio exempts
de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de
l’ISEDC
Software License Agreement
BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF
THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
CAREFULLY.
Hammerhead Navigation Inc. and its subsidiaries (“Hammerhead”) grant you a limited license to use
the software embedded in this device (the “Software”) in binary executable form in the normal operation
of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in
Hammerhead and/or its third-party providers.
You acknowledge that the Software is the property of Hammerhead and/or its third-party providers and
is protected under the United States of America copyright laws and international copyright treaties. You
further acknowledge that the structure, organization, and code of the Software, for which source code
is not provided, are valuable trade secrets of Hammerhead and/or its third-party providers and that the
Software in source code form remains a valuable trade secret of Hammerhead and/or its third-party
providers. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or
reduce to human readable form the Software or any part thereof or create any derivative works based on
the Software. You agree not to export or re-export the Software to any country in violation of the export
control laws of the United States of America or the export control laws of any other applicable country.
Map Data Information
Hammerhead uses a combination of governmental and private data sources. Virtually all data sources
contain some inaccurate or incomplete data. In some countries, complete and accurate map information
is either not available or is prohibitively expensive.
Limited Warranty
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER LEGAL RIGHTS, WHICH VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
HAMMERHEAD DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER LEGAL RIGHTS YOU
MAY HAVE UNDER THE LAWS OF YOUR STATE (OR COUNTRY OR PROVINCE). FOR A FULL
UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR STATE,
COUNTRY OR PROVINCE.
This device is warranted to be free from defects in materials or workmanship, for one year from the date
of purchase. For purchases exclusively within the European Union, the warranty period is extended
to two years. Within these respective periods, Hammerhead will, at its sole option, repair or replace
any components that fail in normal use. Such repairs or replacement will be made at no charge to the
customer for parts or labor, provided that the customer shall be responsible for complying with all
applicable import and export laws and regulations and for paying all custom duties, V.A.T., shipping fees
and other associated taxes and charges. This Limited Warranty does not apply to: (i) cosmetic damage,
such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage has
occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse,
water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed
by anyone who is not an authorized by Hammerhead; (v) damage to a product that has been modified
or altered without the written permission of Hammerhead, or (vi) damage to a product that has been
connected to power and/or data cables that are not supplied by Hammerhead. In addition, Hammerhead
reserves the right to refuse warranty claims against products or services that are obtained and/or used
in contravention of the laws of any country. Hammerhead reserves the right to refuse warranty claims
against products or services that are obtained through unauthorized dealers or resellers. Hammerhead
products are intended to be used only as a travel aid and must not be used for any purpose requiring
precise measurement of direction, distance, location or topography. Hammerhead makes no warranty as
to the accuracy or completeness of map data.
This Limited Warranty also does not apply to, and Hammerhead is not responsible for, any degradation
in the performance of any Hammerhead product resulting from its use in proximity to any handset
or other device that utilizes a terrestrial broadband network operating on frequencies that are close to
the frequencies used by any Global Navigation Satellite System (GNSS) such as the Global Positioning
Service (GPS). Use of such devices may impair reception of GNSS signals.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE WARRANTIES AND
REMEDIES CONTAINED IN THIS LIMITED WARRANTY ARE EXCLUSIVE AND IN LIEU OF,
AND HAMMERHEAD EXPRESSLY DISCLAIMS, ALL OTHER WARRANTIES AND REMEDIES,
WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, STATUTORY REMEDY OR OTHERWISE. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER LEGAL RIGHTS, WHICH VARY FROM
STATE TO STATE AND FROM COUNTRY TO COUNTRY. IF IMPLIED WARRANTIES CANNOT
BE DISCLAIMED UNDER THE LAWS OF YOUR STATE OR COUNTRY, THEN SUCH WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. SOME
STATES (AND COUNTRIES AND PROVINCES) DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL HAMMERHEAD BE LIABLE IN A CLAIM FOR BREACH OF WARRANTY
FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS
IN THE PRODUCT. SOME STATES (AND COUNTRIES AND PROVINCES) DO NOT ALLOW THE
EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
MAY NOT APPLY TO YOU.
If during the warranty period you submit a claim for warranty service in accordance with this Limited
Warranty, then Hammerhead will, at its option: (i) repair the device using new parts or previously
used parts that satisfy Hammerhead’s quality standards, (ii) replace the device with a new device or a
refurbished device that meets Hammerhead’s quality standards, or (iii) exchange the device for a full
refund of your purchase price. Repaired or replaced devices have a 60 day warranty. If the unit sent in
is still under its original warranty, then the new warranty is 60 days or to the end of the original 1 year
warranty, or 2 year warranty respectively for the European Union, whichever is longer. Before seeking
warranty service, please access and review the online help resources available on www..hammerhead.io
If your device is still not functioning properly after making use of these resources, contact Hammerhead
at support@hammerhead.io to process your warranty claim.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:01:12 23:09:07-05:00
Creator                         : Adobe InDesign CC 13.0 (Macintosh)
Modify Date                     : 2018:02:06 10:40:07-08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:02:06 10:40:07-08:00
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Instance ID                     : uuid:a3a07da4-d8c7-4d35-b044-ef775efb16fe
Original Document ID            : xmp.did:c8ef6f72-af1f-4dcf-82cc-b287f10beecf
Document ID                     : xmp.id:9c661d80-73c4-4851-ac1a-75d56fa62db8
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:01:12 23:09:07-05:00
Derived From Instance ID        : xmp.iid:40ed5c58-6da5-4109-8207-17dc27653c78
Derived From Document ID        : xmp.did:046eb5f2-279a-482f-ac64-8cd7559a5cf0
Derived From Original Document ID: xmp.did:c8ef6f72-af1f-4dcf-82cc-b287f10beecf
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 12

EXIF Metadata provided by EXIF.tools