Handheld Wireless Technology C5000 Mobile Phone User Manual C5000

Shenzhen Handheld-Wireless Technology Co., Ltd Mobile Phone C5000

User Manual

`
C5000 Android Mobile Computer
C5000 serial products extend Handheld-Wireless product serials into Android OS 5.1.1 with 3G network communication.
Inside the compact handheld device, sealing level of IP65 water/dust proof, 1.5m/4.5ft drop survival, ergonomic design,
over-molding structure, quick- charging technology, and 5.0 inch tough Gorilla Glass 3 screen are all equipped to ensure
performance. Latest 1.3GHz quad-core processor 2GB RAM/16GB ROM and up to 32GB expansion are all designed to
boost up experience level.
FEATURES
-------------------------------------------------------------------------------------------------------------------------------------
Extremely Stable Performance
Android 5.1.1 OS with memory of 2GB RAM/16GB ROM can provide the highly standard experience
High Speed Data Communication
Double insurance of 3G network and WIFI network can ensure the real-time data communication in different using
environment;
Rugged Ergonomic and Over-molding Design
Over-molding and ergonomic hardware design can satisfy most of the tough environment from different fields;
Extremely Stable Hardware Display
5.0 inch Gorilla Glass 3 9H screen can ensure the performance under different tough environment;
Quick-Charging
Quick-charging technology can provide the most efficient experience;
Perfect Service
Professional and skillful service involving the whole life cycle can guarantee the stability.
`
SPECIFICATIONS
PHYSICAL CHARACTERISTICS
Dimension 170mm(H)x85mm(W)x23mm(D)±2 mm
Weight Net Weight :370g (including battery&wrist strap)
Display Gorilla Glass 3 9H 5.0 in. TFT-LCD(720x1280)touch screen with backlight
Backlight LED backlight
Keypads 3 TP keys, 6 function keys, 4 side buttons
Expansions 2 PSAM, 1 SIM, 1 TF
Battery Rechargeable li-ion polymer, 3.7V, 4500mAh
PERFORMANCE CHARACTERSTICS
CPU Quad A53 1.3GHz quad-core
Operating System Android 5.1.1
Storage 2GB RAM, 16GB ROM, MicroSD(max 32GB expansion)
USER ENVIRONMENT
Operating Temp. -20℃ to 50℃
Storage Temp. -20℃ to 70℃
Humidity 5%RH to 95%RH(non-condensing)
Drop Specifications 5ft./1.5 m drop to concrete across the operating temperature range
Sealing IP65, IEC compliance
ESD ±15kv air discharge, ±8kv direct discharge
DEVELOPMENT ENVIRONMENT
SDK HHW Software Development Kit
Language Java
Environment Android Studio or Eclipse
DATA COMMUNICATION
WWAN WCDMA(850/1900/2100MHz);
GSM/GPRS/Edge (850/900/1800/1900MHz);
WLAN 2.4GHz, IEEE 802.11b/g/n
WPAN Bluetooth v4.0 BLE
GPS GPS(embedded A-GPS), accuracy of 5 m
DATA CAPTUER
BARCODE READER(OPTIONAL)
1D barcode 1D laser engine Symbol SE955
Symbologies All major 1D barcodes
2D barcode
2D CMOS Imager Honeywell N6603
Symbologies
PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR
code, Micro QR code, Aztec, MaxiCode, Postal Codes, US PostNet,
US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal.
`
etc.
COLOR CAMERA
Resolution 8.0 megapixel
Lens Auto-focus with LED flash
RFID READER(OPTIONAL)
RFID HF
Frequency
13.56MHz
Protocol ISO 14443A&15693
R/W Range 2cm to 8cm
FINGERPRINT READER(OPTIONAL)
Sensor TCS1ST
Sensor type Capacitive, area sensor
Resolution 508 DPI
Performance FRR<0.008%, FAR<0.005%
Capacity 1000
PSAM SECURITY(OPTIONAL)
Protocol ISO 7816
Baudrate 9600, 19200, 38400,43000, 56000, 57600, 115200
Slot 2 slots(maximum)
ACCESSORIES
Standard 1xPower Supply; 1xLithium Polymer Battery; 1xDC charging cable; 1xUSB data cable
Optional Carrying case; Cradle
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed
the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are based on standards that
were developed by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level
in all tested frequency bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value. This is because
the phone is designed to operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station antenna, the lower the power
output. Before a phone model is available for sale to the public, it must be tested and certified to the
FCC that it does not exceed the limit established by the government adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as
required by the FCC for each model. The highest SAR value for this model phone when tested for use
at the ear is 0.060W/Kg and when worn on the body, as described in this user guide, is 0.244W/Kg.
(Body-worn measurements differ among phone models, depending upon available accessories and
FCC requirements). While there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirement for safe exposure. The FCC has granted
an Equipment Authorization for this model phone with all reported SAR levels evaluated as in
compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with
the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after
searching on FCC ID: 2AKFLC5000
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United
States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a
minimum separation distance of 5 mm must be maintained between the user's body and the handset,
including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.

Navigation menu