Handscape Technology HANDY HandyCase User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3813521
Application ID	WNCa1h2xi5Ois86OgwLf+Q==
Document Description	user_manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.55kB (231896 bits)
Date Submitted	2018-04-12 00:00:00
Date Available	2018-04-12 00:00:00
Creation Date	2018-04-10 11:19:13
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-04-10 11:20:07
Document Title	Microsoft Word - user manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

User Manual‐‐‐‐HandyCase™
Product Specifications
Bluetooth BLE4.0
Micro USB charging port
Operating Range: Up to 30 feet (10 meters)
Use time: Up to 2 days
Charging time: About 2 hours
Box Contents: HandyCase™, Micro USB Cable, User Manual
Thank you for using the HandyCase™ of HandScape Inc. In order to enhance your
experience with HandyCase™, detailed instruction is provided below. Before using this
product, please read the user manual carefully. In case of any printing error or typo, we
apologize for the inconvenience. We reserve the right for final explanation.
Highlight
The most amazing part of your product is when paired with one of our applications, you
are able to see your finger positions as if your screen was transparent! The
HandyCase™will allow you to interact with your phone in a whole new way and open up
even more control possibilities.
The application starts by showing touch points. When 4 fingers touching the case, our
multi‐patented technology will show all your fingers and automatically figure out it’s
your left or right hand.
Connect HandyCase™ to IOS device
1. Enable your IOS device’s Bluetooth.
2. Power on HandyCase™, the red light is on and the blue LED will blinksignaling it’s
on (means searching for bluetooth).
3. Open compatible HandyCase™ app, the HandyCase™ will automatically connect
with Bluetooth. (Please search HandScape® in App Store to download apps)
4. The blue LED will be off after successfully connecting after 5 seconds.
5. Now enjoy yourHandyCase™.
Check Battery
After HandyCase™connected to your IOS devices, press the power button again, the LED
will display battery status. A green LED indicates that battery power remaining is more
than 25%. A red LED will indicate that the device has less than 25% battery power
remaining and that the case need to be charged.
Charge HandyCase™
Use microUSB cable to charge the HandyCase™ battery.
Charging will be indicated by a blinking red LED. When the case is fully charged, the LED
will turn green.
After the case is fully charged, please remove the cable.
Power off HandyCase™
When HandyCase™ is on, press power button for 3 seconds, then HandyCase™
will be off. Or HandyCase™ will also be off automatically when staying in searching
Bluetooth status for more than 30 seconds.
HandScape® and HandyCase™ mentioned in the user manual are all trademarks for
HandScape Inc.
Apple® and iPhone® mentioned in the user manual are all registered logo for Apple Inc.
Company Information
HandScape Inc.
939 Corporate Way, Fremont, CA 94539 USA
www.handscape.com
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equip
ment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenc
e to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encoura
ged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2018:04:10 11:19:13+08:00
Modify Date                     : 2018:04:10 11:20:07+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:04:10 11:20:07+08:00
Format                          : application/pdf
Title                           : Microsoft Word - user manual
Creator                         : Administrator
Document ID                     : uuid:43d65912-2fab-4aac-bd40-f0ab0528e95a
Instance ID                     : uuid:6d7f73a6-4e53-4473-bb66-cc3ebd7cc555
Page Count                      : 2

EXIF Metadata provided by EXIF.tools